WIP FPC-III support

[linux/fpc-iii.git] / arch / powerpc / include / asm / book3s / 32 / pgtable.h

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_POWERPC_BOOK3S_32_PGTABLE_H
#define _ASM_POWERPC_BOOK3S_32_PGTABLE_H

#include <asm-generic/pgtable-nopmd.h>

#include <asm/book3s/32/hash.h>

/* And here we include common definitions */

#define _PAGE_KERNEL_RO         0
#define _PAGE_KERNEL_ROX        (_PAGE_EXEC)
#define _PAGE_KERNEL_RW         (_PAGE_DIRTY | _PAGE_RW)
#define _PAGE_KERNEL_RWX        (_PAGE_DIRTY | _PAGE_RW | _PAGE_EXEC)

#define _PAGE_HPTEFLAGS _PAGE_HASHPTE

#ifndef __ASSEMBLY__

static inline bool pte_user(pte_t pte)
{
        return pte_val(pte) & _PAGE_USER;
}
#endif /* __ASSEMBLY__ */

/*
 * Location of the PFN in the PTE. Most 32-bit platforms use the same
 * as _PAGE_SHIFT here (ie, naturally aligned).
 * Platform who don't just pre-define the value so we don't override it here.
 */
#define PTE_RPN_SHIFT   (PAGE_SHIFT)

/*
 * The mask covered by the RPN must be a ULL on 32-bit platforms with
 * 64-bit PTEs.
 */
#ifdef CONFIG_PTE_64BIT
#define PTE_RPN_MASK    (~((1ULL << PTE_RPN_SHIFT) - 1))
#define MAX_POSSIBLE_PHYSMEM_BITS 36
#else
#define PTE_RPN_MASK    (~((1UL << PTE_RPN_SHIFT) - 1))
#define MAX_POSSIBLE_PHYSMEM_BITS 32
#endif

/*
 * _PAGE_CHG_MASK masks of bits that are to be preserved across
 * pgprot changes.
 */
#define _PAGE_CHG_MASK  (PTE_RPN_MASK | _PAGE_HASHPTE | _PAGE_DIRTY | \
                         _PAGE_ACCESSED | _PAGE_SPECIAL)

/*
 * We define 2 sets of base prot bits, one for basic pages (ie,
 * cacheable kernel and user pages) and one for non cacheable
 * pages. We always set _PAGE_COHERENT when SMP is enabled or
 * the processor might need it for DMA coherency.
 */
#define _PAGE_BASE_NC   (_PAGE_PRESENT | _PAGE_ACCESSED)
#define _PAGE_BASE      (_PAGE_BASE_NC | _PAGE_COHERENT)

/*
 * Permission masks used to generate the __P and __S table.
 *
 * Note:__pgprot is defined in arch/powerpc/include/asm/page.h
 *
 * Write permissions imply read permissions for now.
 */
#define PAGE_NONE       __pgprot(_PAGE_BASE)
#define PAGE_SHARED     __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
#define PAGE_SHARED_X   __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
#define PAGE_COPY       __pgprot(_PAGE_BASE | _PAGE_USER)
#define PAGE_COPY_X     __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
#define PAGE_READONLY   __pgprot(_PAGE_BASE | _PAGE_USER)
#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)

/* Permission masks used for kernel mappings */
#define PAGE_KERNEL     __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW)
#define PAGE_KERNEL_NC  __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | _PAGE_NO_CACHE)
#define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
                                 _PAGE_NO_CACHE | _PAGE_GUARDED)
#define PAGE_KERNEL_X   __pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX)
#define PAGE_KERNEL_RO  __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX)

/*
 * Protection used for kernel text. We want the debuggers to be able to
 * set breakpoints anywhere, so don't write protect the kernel text
 * on platforms where such control is possible.
 */
#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
        defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE)
#define PAGE_KERNEL_TEXT        PAGE_KERNEL_X
#else
#define PAGE_KERNEL_TEXT        PAGE_KERNEL_ROX
#endif

/* Make modules code happy. We don't set RO yet */
#define PAGE_KERNEL_EXEC        PAGE_KERNEL_X

/* Advertise special mapping type for AGP */
#define PAGE_AGP                (PAGE_KERNEL_NC)
#define HAVE_PAGE_AGP

#define PTE_INDEX_SIZE  PTE_SHIFT
#define PMD_INDEX_SIZE  0
#define PUD_INDEX_SIZE  0
#define PGD_INDEX_SIZE  (32 - PGDIR_SHIFT)

#define PMD_CACHE_INDEX PMD_INDEX_SIZE
#define PUD_CACHE_INDEX PUD_INDEX_SIZE

#ifndef __ASSEMBLY__
#define PTE_TABLE_SIZE  (sizeof(pte_t) << PTE_INDEX_SIZE)
#define PMD_TABLE_SIZE  0
#define PUD_TABLE_SIZE  0
#define PGD_TABLE_SIZE  (sizeof(pgd_t) << PGD_INDEX_SIZE)

/* Bits to mask out from a PMD to get to the PTE page */
#define PMD_MASKED_BITS         (PTE_TABLE_SIZE - 1)
#endif  /* __ASSEMBLY__ */

#define PTRS_PER_PTE    (1 << PTE_INDEX_SIZE)
#define PTRS_PER_PGD    (1 << PGD_INDEX_SIZE)

/*
 * The normal case is that PTEs are 32-bits and we have a 1-page
 * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
 *
 * For any >32-bit physical address platform, we can use the following
 * two level page table layout where the pgdir is 8KB and the MS 13 bits
 * are an index to the second level table.  The combined pgdir/pmd first
 * level has 2048 entries and the second level has 512 64-bit PTE entries.
 * -Matt
 */
/* PGDIR_SHIFT determines what a top-level page table entry can map */
#define PGDIR_SHIFT     (PAGE_SHIFT + PTE_INDEX_SIZE)
#define PGDIR_SIZE      (1UL << PGDIR_SHIFT)
#define PGDIR_MASK      (~(PGDIR_SIZE-1))

#define USER_PTRS_PER_PGD       (TASK_SIZE / PGDIR_SIZE)

#ifndef __ASSEMBLY__

int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);

#endif /* !__ASSEMBLY__ */

/*
 * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
 * value (for now) on others, from where we can start layout kernel
 * virtual space that goes below PKMAP and FIXMAP
 */
#include <asm/fixmap.h>

/*
 * ioremap_bot starts at that address. Early ioremaps move down from there,
 * until mem_init() at which point this becomes the top of the vmalloc
 * and ioremap space
 */
#ifdef CONFIG_HIGHMEM
#define IOREMAP_TOP     PKMAP_BASE
#else
#define IOREMAP_TOP     FIXADDR_START
#endif

/* PPC32 shares vmalloc area with ioremap */
#define IOREMAP_START   VMALLOC_START
#define IOREMAP_END     VMALLOC_END

/*
 * Just any arbitrary offset to the start of the vmalloc VM area: the
 * current 16MB value just means that there will be a 64MB "hole" after the
 * physical memory until the kernel virtual memory starts.  That means that
 * any out-of-bounds memory accesses will hopefully be caught.
 * The vmalloc() routines leaves a hole of 4kB between each vmalloced
 * area for the same reason. ;)
 *
 * We no longer map larger than phys RAM with the BATs so we don't have
 * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
 * about clashes between our early calls to ioremap() that start growing down
 * from ioremap_base being run into the VM area allocations (growing upwards
 * from VMALLOC_START).  For this reason we have ioremap_bot to check when
 * we actually run into our mappings setup in the early boot with the VM
 * system.  This really does become a problem for machines with good amounts
 * of RAM.  -- Cort
 */
#define VMALLOC_OFFSET (0x1000000) /* 16M */

#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))

#ifdef CONFIG_KASAN_VMALLOC
#define VMALLOC_END     ALIGN_DOWN(ioremap_bot, PAGE_SIZE << KASAN_SHADOW_SCALE_SHIFT)
#else
#define VMALLOC_END     ioremap_bot
#endif

#ifdef CONFIG_STRICT_KERNEL_RWX
#define MODULES_END     ALIGN_DOWN(PAGE_OFFSET, SZ_256M)
#define MODULES_VADDR   (MODULES_END - SZ_256M)
#endif

#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <linux/threads.h>

/* Bits to mask out from a PGD to get to the PUD page */
#define PGD_MASKED_BITS         0

#define pte_ERROR(e) \
        pr_err("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
                (unsigned long long)pte_val(e))
#define pgd_ERROR(e) \
        pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
/*
 * Bits in a linux-style PTE.  These match the bits in the
 * (hardware-defined) PowerPC PTE as closely as possible.
 */

#define pte_clear(mm, addr, ptep) \
        do { pte_update(mm, addr, ptep, ~_PAGE_HASHPTE, 0, 0); } while (0)

#define pmd_none(pmd)           (!pmd_val(pmd))
#define pmd_bad(pmd)            (pmd_val(pmd) & _PMD_BAD)
#define pmd_present(pmd)        (pmd_val(pmd) & _PMD_PRESENT_MASK)
static inline void pmd_clear(pmd_t *pmdp)
{
        *pmdp = __pmd(0);
}


/*
 * When flushing the tlb entry for a page, we also need to flush the hash
 * table entry.  flush_hash_pages is assembler (for speed) in hashtable.S.
 */
extern int flush_hash_pages(unsigned context, unsigned long va,
                            unsigned long pmdval, int count);

/* Add an HPTE to the hash table */
extern void add_hash_page(unsigned context, unsigned long va,
                          unsigned long pmdval);

/* Flush an entry from the TLB/hash table */
static inline void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr)
{
        if (mmu_has_feature(MMU_FTR_HPTE_TABLE)) {
                unsigned long ptephys = __pa(ptep) & PAGE_MASK;

                flush_hash_pages(mm->context.id, addr, ptephys, 1);
        }
}

/*
 * PTE updates. This function is called whenever an existing
 * valid PTE is updated. This does -not- include set_pte_at()
 * which nowadays only sets a new PTE.
 *
 * Depending on the type of MMU, we may need to use atomic updates
 * and the PTE may be either 32 or 64 bit wide. In the later case,
 * when using atomic updates, only the low part of the PTE is
 * accessed atomically.
 */
static inline pte_basic_t pte_update(struct mm_struct *mm, unsigned long addr, pte_t *p,
                                     unsigned long clr, unsigned long set, int huge)
{
        pte_basic_t old;
        unsigned long tmp;

        __asm__ __volatile__(
#ifndef CONFIG_PTE_64BIT
"1:     lwarx   %0, 0, %3\n"
"       andc    %1, %0, %4\n"
#else
"1:     lwarx   %L0, 0, %3\n"
"       lwz     %0, -4(%3)\n"
"       andc    %1, %L0, %4\n"
#endif
"       or      %1, %1, %5\n"
"       stwcx.  %1, 0, %3\n"
"       bne-    1b"
        : "=&r" (old), "=&r" (tmp), "=m" (*p)
#ifndef CONFIG_PTE_64BIT
        : "r" (p),
#else
        : "b" ((unsigned long)(p) + 4),
#endif
          "r" (clr), "r" (set), "m" (*p)
        : "cc" );

        return old;
}

/*
 * 2.6 calls this without flushing the TLB entry; this is wrong
 * for our hash-based implementation, we fix that up here.
 */
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
                                              unsigned long addr, pte_t *ptep)
{
        unsigned long old;
        old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0);
        if (old & _PAGE_HASHPTE)
                flush_hash_entry(mm, ptep, addr);

        return (old & _PAGE_ACCESSED) != 0;
}
#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
        __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep)

#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
                                       pte_t *ptep)
{
        return __pte(pte_update(mm, addr, ptep, ~_PAGE_HASHPTE, 0, 0));
}

#define __HAVE_ARCH_PTEP_SET_WRPROTECT
static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
                                      pte_t *ptep)
{
        pte_update(mm, addr, ptep, _PAGE_RW, 0, 0);
}

static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
                                           pte_t *ptep, pte_t entry,
                                           unsigned long address,
                                           int psize)
{
        unsigned long set = pte_val(entry) &
                (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);

        pte_update(vma->vm_mm, address, ptep, 0, set, 0);

        flush_tlb_page(vma, address);
}

#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B)   (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)

#define pmd_page(pmd)           \
        pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)

/*
 * Encode and decode a swap entry.
 * Note that the bits we use in a PTE for representing a swap entry
 * must not include the _PAGE_PRESENT bit or the _PAGE_HASHPTE bit (if used).
 *   -- paulus
 */
#define __swp_type(entry)               ((entry).val & 0x1f)
#define __swp_offset(entry)             ((entry).val >> 5)
#define __swp_entry(type, offset)       ((swp_entry_t) { (type) | ((offset) << 5) })
#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) >> 3 })
#define __swp_entry_to_pte(x)           ((pte_t) { (x).val << 3 })

/* Generic accessors to PTE bits */
static inline int pte_write(pte_t pte)          { return !!(pte_val(pte) & _PAGE_RW);}
static inline int pte_read(pte_t pte)           { return 1; }
static inline int pte_dirty(pte_t pte)          { return !!(pte_val(pte) & _PAGE_DIRTY); }
static inline int pte_young(pte_t pte)          { return !!(pte_val(pte) & _PAGE_ACCESSED); }
static inline int pte_special(pte_t pte)        { return !!(pte_val(pte) & _PAGE_SPECIAL); }
static inline int pte_none(pte_t pte)           { return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
static inline bool pte_exec(pte_t pte)          { return pte_val(pte) & _PAGE_EXEC; }

static inline int pte_present(pte_t pte)
{
        return pte_val(pte) & _PAGE_PRESENT;
}

static inline bool pte_hw_valid(pte_t pte)
{
        return pte_val(pte) & _PAGE_PRESENT;
}

static inline bool pte_hashpte(pte_t pte)
{
        return !!(pte_val(pte) & _PAGE_HASHPTE);
}

static inline bool pte_ci(pte_t pte)
{
        return !!(pte_val(pte) & _PAGE_NO_CACHE);
}

/*
 * We only find page table entry in the last level
 * Hence no need for other accessors
 */
#define pte_access_permitted pte_access_permitted
static inline bool pte_access_permitted(pte_t pte, bool write)
{
        /*
         * A read-only access is controlled by _PAGE_USER bit.
         * We have _PAGE_READ set for WRITE and EXECUTE
         */
        if (!pte_present(pte) || !pte_user(pte) || !pte_read(pte))
                return false;

        if (write && !pte_write(pte))
                return false;

        return true;
}

/* Conversion functions: convert a page and protection to a page entry,
 * and a page entry and page directory to the page they refer to.
 *
 * Even if PTEs can be unsigned long long, a PFN is always an unsigned
 * long for now.
 */
static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
{
        return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |
                     pgprot_val(pgprot));
}

static inline unsigned long pte_pfn(pte_t pte)
{
        return pte_val(pte) >> PTE_RPN_SHIFT;
}

/* Generic modifiers for PTE bits */
static inline pte_t pte_wrprotect(pte_t pte)
{
        return __pte(pte_val(pte) & ~_PAGE_RW);
}

static inline pte_t pte_exprotect(pte_t pte)
{
        return __pte(pte_val(pte) & ~_PAGE_EXEC);
}

static inline pte_t pte_mkclean(pte_t pte)
{
        return __pte(pte_val(pte) & ~_PAGE_DIRTY);
}

static inline pte_t pte_mkold(pte_t pte)
{
        return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
}

static inline pte_t pte_mkexec(pte_t pte)
{
        return __pte(pte_val(pte) | _PAGE_EXEC);
}

static inline pte_t pte_mkpte(pte_t pte)
{
        return pte;
}

static inline pte_t pte_mkwrite(pte_t pte)
{
        return __pte(pte_val(pte) | _PAGE_RW);
}

static inline pte_t pte_mkdirty(pte_t pte)
{
        return __pte(pte_val(pte) | _PAGE_DIRTY);
}

static inline pte_t pte_mkyoung(pte_t pte)
{
        return __pte(pte_val(pte) | _PAGE_ACCESSED);
}

static inline pte_t pte_mkspecial(pte_t pte)
{
        return __pte(pte_val(pte) | _PAGE_SPECIAL);
}

static inline pte_t pte_mkhuge(pte_t pte)
{
        return pte;
}

static inline pte_t pte_mkprivileged(pte_t pte)
{
        return __pte(pte_val(pte) & ~_PAGE_USER);
}

static inline pte_t pte_mkuser(pte_t pte)
{
        return __pte(pte_val(pte) | _PAGE_USER);
}

static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
        return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
}



/* This low level function performs the actual PTE insertion
 * Setting the PTE depends on the MMU type and other factors. It's
 * an horrible mess that I'm not going to try to clean up now but
 * I'm keeping it in one place rather than spread around
 */
static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
                                pte_t *ptep, pte_t pte, int percpu)
{
#if defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
        /* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the
         * helper pte_update() which does an atomic update. We need to do that
         * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a
         * per-CPU PTE such as a kmap_atomic, we do a simple update preserving
         * the hash bits instead (ie, same as the non-SMP case)
         */
        if (percpu)
                *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
                              | (pte_val(pte) & ~_PAGE_HASHPTE));
        else
                pte_update(mm, addr, ptep, ~_PAGE_HASHPTE, pte_val(pte), 0);

#elif defined(CONFIG_PTE_64BIT)
        /* Second case is 32-bit with 64-bit PTE.  In this case, we
         * can just store as long as we do the two halves in the right order
         * with a barrier in between. This is possible because we take care,
         * in the hash code, to pre-invalidate if the PTE was already hashed,
         * which synchronizes us with any concurrent invalidation.
         * In the percpu case, we also fallback to the simple update preserving
         * the hash bits
         */
        if (percpu) {
                *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
                              | (pte_val(pte) & ~_PAGE_HASHPTE));
                return;
        }
        if (pte_val(*ptep) & _PAGE_HASHPTE)
                flush_hash_entry(mm, ptep, addr);
        __asm__ __volatile__("\
                stw%X0 %2,%0\n\
                eieio\n\
                stw%X1 %L2,%1"
        : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
        : "r" (pte) : "memory");

#else
        /* Third case is 32-bit hash table in UP mode, we need to preserve
         * the _PAGE_HASHPTE bit since we may not have invalidated the previous
         * translation in the hash yet (done in a subsequent flush_tlb_xxx())
         * and see we need to keep track that this PTE needs invalidating
         */
        *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
                      | (pte_val(pte) & ~_PAGE_HASHPTE));
#endif
}

/*
 * Macro to mark a page protection value as "uncacheable".
 */

#define _PAGE_CACHE_CTL (_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
                         _PAGE_WRITETHRU)

#define pgprot_noncached pgprot_noncached
static inline pgprot_t pgprot_noncached(pgprot_t prot)
{
        return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
                        _PAGE_NO_CACHE | _PAGE_GUARDED);
}

#define pgprot_noncached_wc pgprot_noncached_wc
static inline pgprot_t pgprot_noncached_wc(pgprot_t prot)
{
        return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
                        _PAGE_NO_CACHE);
}

#define pgprot_cached pgprot_cached
static inline pgprot_t pgprot_cached(pgprot_t prot)
{
        return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
                        _PAGE_COHERENT);
}

#define pgprot_cached_wthru pgprot_cached_wthru
static inline pgprot_t pgprot_cached_wthru(pgprot_t prot)
{
        return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
                        _PAGE_COHERENT | _PAGE_WRITETHRU);
}

#define pgprot_cached_noncoherent pgprot_cached_noncoherent
static inline pgprot_t pgprot_cached_noncoherent(pgprot_t prot)
{
        return __pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL);
}

#define pgprot_writecombine pgprot_writecombine
static inline pgprot_t pgprot_writecombine(pgprot_t prot)
{
        return pgprot_noncached_wc(prot);
}

#endif /* !__ASSEMBLY__ */

#endif /*  _ASM_POWERPC_BOOK3S_32_PGTABLE_H */