arch/powerpc/mm/nohash/40x.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * This file contains the routines for initializing the MMU
   4  * on the 4xx series of chips.
   5  *  -- paulus
   6  *
   7  *  Derived from arch/ppc/mm/init.c:
   8  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
   9  *
  10  *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
  11  *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
  12  *    Copyright (C) 1996 Paul Mackerras
  13  *
  14  *  Derived from "arch/i386/mm/init.c"
  15  *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
  16  */
  17
  18 #include <linux/signal.h>
  19 #include <linux/sched.h>
  20 #include <linux/kernel.h>
  21 #include <linux/errno.h>
  22 #include <linux/string.h>
  23 #include <linux/types.h>
  24 #include <linux/ptrace.h>
  25 #include <linux/mman.h>
  26 #include <linux/mm.h>
  27 #include <linux/swap.h>
  28 #include <linux/stddef.h>
  29 #include <linux/vmalloc.h>
  30 #include <linux/init.h>
  31 #include <linux/delay.h>
  32 #include <linux/highmem.h>
  33 #include <linux/memblock.h>
  34
  35 #include <asm/prom.h>
  36 #include <asm/io.h>
  37 #include <asm/mmu_context.h>
  38 #include <asm/mmu.h>
  39 #include <linux/uaccess.h>
  40 #include <asm/smp.h>
  41 #include <asm/bootx.h>
  42 #include <asm/machdep.h>
  43 #include <asm/setup.h>
  44
  45 #include <mm/mmu_decl.h>
  46
  47 extern int __map_without_ltlbs;
  48 /*
  49  * MMU_init_hw does the chip-specific initialization of the MMU hardware.
  50  */
  51 void __init MMU_init_hw(void)
  52 {
  53         /*
  54          * The Zone Protection Register (ZPR) defines how protection will
  55          * be applied to every page which is a member of a given zone. At
  56          * present, we utilize only two of the 4xx's zones.
  57          * The zone index bits (of ZSEL) in the PTE are used for software
  58          * indicators, except the LSB.  For user access, zone 1 is used,
  59          * for kernel access, zone 0 is used.  We set all but zone 1
  60          * to zero, allowing only kernel access as indicated in the PTE.
  61          * For zone 1, we set a 01 binary (a value of 10 will not work)
  62          * to allow user access as indicated in the PTE.  This also allows
  63          * kernel access as indicated in the PTE.
  64          */
  65
  66         mtspr(SPRN_ZPR, 0x10000000);
  67
  68         flush_instruction_cache();
  69
  70         /*
  71          * Set up the real-mode cache parameters for the exception vector
  72          * handlers (which are run in real-mode).
  73          */
  74
  75         mtspr(SPRN_DCWR, 0x00000000);   /* All caching is write-back */
  76
  77         /*
  78          * Cache instruction and data space where the exception
  79          * vectors and the kernel live in real-mode.
  80          */
  81
  82         mtspr(SPRN_DCCR, 0xFFFF0000);   /* 2GByte of data space at 0x0. */
  83         mtspr(SPRN_ICCR, 0xFFFF0000);   /* 2GByte of instr. space at 0x0. */
  84 }
  85
  86 #define LARGE_PAGE_SIZE_16M     (1<<24)
  87 #define LARGE_PAGE_SIZE_4M      (1<<22)
  88
  89 unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
  90 {
  91         unsigned long v, s, mapped;
  92         phys_addr_t p;
  93
  94         v = KERNELBASE;
  95         p = 0;
  96         s = total_lowmem;
  97
  98         if (__map_without_ltlbs)
  99                 return 0;
 100
 101         while (s >= LARGE_PAGE_SIZE_16M) {
 102                 pmd_t *pmdp;
 103                 unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_RW;
 104
 105                 pmdp = pmd_off_k(v);
 106                 *pmdp++ = __pmd(val);
 107                 *pmdp++ = __pmd(val);
 108                 *pmdp++ = __pmd(val);
 109                 *pmdp++ = __pmd(val);
 110
 111                 v += LARGE_PAGE_SIZE_16M;
 112                 p += LARGE_PAGE_SIZE_16M;
 113                 s -= LARGE_PAGE_SIZE_16M;
 114         }
 115
 116         while (s >= LARGE_PAGE_SIZE_4M) {
 117                 pmd_t *pmdp;
 118                 unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_RW;
 119
 120                 pmdp = pmd_off_k(v);
 121                 *pmdp = __pmd(val);
 122
 123                 v += LARGE_PAGE_SIZE_4M;
 124                 p += LARGE_PAGE_SIZE_4M;
 125                 s -= LARGE_PAGE_SIZE_4M;
 126         }
 127
 128         mapped = total_lowmem - s;
 129
 130         /* If the size of RAM is not an exact power of two, we may not
 131          * have covered RAM in its entirety with 16 and 4 MiB
 132          * pages. Consequently, restrict the top end of RAM currently
 133          * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
 134          * coverage with normal-sized pages (or other reasons) do not
 135          * attempt to allocate outside the allowed range.
 136          */
 137         memblock_set_current_limit(mapped);
 138
 139         return mapped;
 140 }
 141
 142 void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 143                                 phys_addr_t first_memblock_size)
 144 {
 145         /* We don't currently support the first MEMBLOCK not mapping 0
 146          * physical on those processors
 147          */
 148         BUG_ON(first_memblock_base != 0);
 149
 150         /* 40x can only access 16MB at the moment (see head_40x.S) */
 151         memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
 152 }