1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * IOMMU implementation for Cell Broadband Processor Architecture
5 * (C) Copyright IBM Corporation 2006-2008
7 * Author: Jeremy Kerr <jk@ozlabs.org>
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/interrupt.h>
15 #include <linux/notifier.h>
17 #include <linux/of_platform.h>
18 #include <linux/slab.h>
19 #include <linux/memblock.h>
22 #include <asm/iommu.h>
23 #include <asm/machdep.h>
24 #include <asm/pci-bridge.h>
26 #include <asm/firmware.h>
27 #include <asm/cell-regs.h>
30 #include "interrupt.h"
32 /* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages
33 * instead of leaving them mapped to some dummy page. This can be
34 * enabled once the appropriate workarounds for spider bugs have
37 #define CELL_IOMMU_REAL_UNMAP
39 /* Define CELL_IOMMU_STRICT_PROTECTION to enforce protection of
40 * IO PTEs based on the transfer direction. That can be enabled
41 * once spider-net has been fixed to pass the correct direction
42 * to the DMA mapping functions
44 #define CELL_IOMMU_STRICT_PROTECTION
49 /* IOC mmap registers */
50 #define IOC_Reg_Size 0x2000
52 #define IOC_IOPT_CacheInvd 0x908
53 #define IOC_IOPT_CacheInvd_NE_Mask 0xffe0000000000000ul
54 #define IOC_IOPT_CacheInvd_IOPTE_Mask 0x000003fffffffff8ul
55 #define IOC_IOPT_CacheInvd_Busy 0x0000000000000001ul
57 #define IOC_IOST_Origin 0x918
58 #define IOC_IOST_Origin_E 0x8000000000000000ul
59 #define IOC_IOST_Origin_HW 0x0000000000000800ul
60 #define IOC_IOST_Origin_HL 0x0000000000000400ul
62 #define IOC_IO_ExcpStat 0x920
63 #define IOC_IO_ExcpStat_V 0x8000000000000000ul
64 #define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul
65 #define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul
66 #define IOC_IO_ExcpStat_SPF_P 0x2000000000000000ul
67 #define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul
68 #define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul
69 #define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful
71 #define IOC_IO_ExcpMask 0x928
72 #define IOC_IO_ExcpMask_SFE 0x4000000000000000ul
73 #define IOC_IO_ExcpMask_PFE 0x2000000000000000ul
75 #define IOC_IOCmd_Offset 0x1000
77 #define IOC_IOCmd_Cfg 0xc00
78 #define IOC_IOCmd_Cfg_TE 0x0000800000000000ul
81 /* Segment table entries */
82 #define IOSTE_V 0x8000000000000000ul /* valid */
83 #define IOSTE_H 0x4000000000000000ul /* cache hint */
84 #define IOSTE_PT_Base_RPN_Mask 0x3ffffffffffff000ul /* base RPN of IOPT */
85 #define IOSTE_NPPT_Mask 0x0000000000000fe0ul /* no. pages in IOPT */
86 #define IOSTE_PS_Mask 0x0000000000000007ul /* page size */
87 #define IOSTE_PS_4K 0x0000000000000001ul /* - 4kB */
88 #define IOSTE_PS_64K 0x0000000000000003ul /* - 64kB */
89 #define IOSTE_PS_1M 0x0000000000000005ul /* - 1MB */
90 #define IOSTE_PS_16M 0x0000000000000007ul /* - 16MB */
94 #define IO_SEGMENT_SHIFT 28
95 #define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift))
97 /* The high bit needs to be set on every DMA address */
98 #define SPIDER_DMA_OFFSET 0x80000000ul
100 struct iommu_window
{
101 struct list_head list
;
102 struct cbe_iommu
*iommu
;
103 unsigned long offset
;
106 struct iommu_table table
;
113 void __iomem
*xlate_regs
;
114 void __iomem
*cmd_regs
;
118 struct list_head windows
;
121 /* Static array of iommus, one per node
122 * each contains a list of windows, keyed from dma_window property
123 * - on bus setup, look for a matching window, or create one
124 * - on dev setup, assign iommu_table ptr
126 static struct cbe_iommu iommus
[NR_IOMMUS
];
127 static int cbe_nr_iommus
;
129 static void invalidate_tce_cache(struct cbe_iommu
*iommu
, unsigned long *pte
,
136 reg
= iommu
->xlate_regs
+ IOC_IOPT_CacheInvd
;
139 /* we can invalidate up to 1 << 11 PTEs at once */
140 n
= min(n_ptes
, 1l << 11);
141 val
= (((n
/*- 1*/) << 53) & IOC_IOPT_CacheInvd_NE_Mask
)
142 | (__pa(pte
) & IOC_IOPT_CacheInvd_IOPTE_Mask
)
143 | IOC_IOPT_CacheInvd_Busy
;
146 while (in_be64(reg
) & IOC_IOPT_CacheInvd_Busy
)
154 static int tce_build_cell(struct iommu_table
*tbl
, long index
, long npages
,
155 unsigned long uaddr
, enum dma_data_direction direction
,
159 unsigned long *io_pte
, base_pte
;
160 struct iommu_window
*window
=
161 container_of(tbl
, struct iommu_window
, table
);
163 /* implementing proper protection causes problems with the spidernet
164 * driver - check mapping directions later, but allow read & write by
166 #ifdef CELL_IOMMU_STRICT_PROTECTION
167 /* to avoid referencing a global, we use a trick here to setup the
168 * protection bit. "prot" is setup to be 3 fields of 4 bits appended
169 * together for each of the 3 supported direction values. It is then
170 * shifted left so that the fields matching the desired direction
171 * lands on the appropriate bits, and other bits are masked out.
173 const unsigned long prot
= 0xc48;
175 ((prot
<< (52 + 4 * direction
)) &
176 (CBE_IOPTE_PP_W
| CBE_IOPTE_PP_R
)) |
177 CBE_IOPTE_M
| CBE_IOPTE_SO_RW
|
178 (window
->ioid
& CBE_IOPTE_IOID_Mask
);
180 base_pte
= CBE_IOPTE_PP_W
| CBE_IOPTE_PP_R
| CBE_IOPTE_M
|
181 CBE_IOPTE_SO_RW
| (window
->ioid
& CBE_IOPTE_IOID_Mask
);
183 if (unlikely(attrs
& DMA_ATTR_WEAK_ORDERING
))
184 base_pte
&= ~CBE_IOPTE_SO_RW
;
186 io_pte
= (unsigned long *)tbl
->it_base
+ (index
- tbl
->it_offset
);
188 for (i
= 0; i
< npages
; i
++, uaddr
+= (1 << tbl
->it_page_shift
))
189 io_pte
[i
] = base_pte
| (__pa(uaddr
) & CBE_IOPTE_RPN_Mask
);
193 invalidate_tce_cache(window
->iommu
, io_pte
, npages
);
195 pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
196 index
, npages
, direction
, base_pte
);
200 static void tce_free_cell(struct iommu_table
*tbl
, long index
, long npages
)
204 unsigned long *io_pte
, pte
;
205 struct iommu_window
*window
=
206 container_of(tbl
, struct iommu_window
, table
);
208 pr_debug("tce_free_cell(index=%lx,n=%lx)\n", index
, npages
);
210 #ifdef CELL_IOMMU_REAL_UNMAP
213 /* spider bridge does PCI reads after freeing - insert a mapping
214 * to a scratch page instead of an invalid entry */
215 pte
= CBE_IOPTE_PP_R
| CBE_IOPTE_M
| CBE_IOPTE_SO_RW
|
216 __pa(window
->iommu
->pad_page
) |
217 (window
->ioid
& CBE_IOPTE_IOID_Mask
);
220 io_pte
= (unsigned long *)tbl
->it_base
+ (index
- tbl
->it_offset
);
222 for (i
= 0; i
< npages
; i
++)
227 invalidate_tce_cache(window
->iommu
, io_pte
, npages
);
230 static irqreturn_t
ioc_interrupt(int irq
, void *data
)
232 unsigned long stat
, spf
;
233 struct cbe_iommu
*iommu
= data
;
235 stat
= in_be64(iommu
->xlate_regs
+ IOC_IO_ExcpStat
);
236 spf
= stat
& IOC_IO_ExcpStat_SPF_Mask
;
238 /* Might want to rate limit it */
239 printk(KERN_ERR
"iommu: DMA exception 0x%016lx\n", stat
);
240 printk(KERN_ERR
" V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n",
241 !!(stat
& IOC_IO_ExcpStat_V
),
242 (spf
== IOC_IO_ExcpStat_SPF_S
) ? 'S' : ' ',
243 (spf
== IOC_IO_ExcpStat_SPF_P
) ? 'P' : ' ',
244 (stat
& IOC_IO_ExcpStat_RW_Mask
) ? "Read" : "Write",
245 (unsigned int)(stat
& IOC_IO_ExcpStat_IOID_Mask
));
246 printk(KERN_ERR
" page=0x%016lx\n",
247 stat
& IOC_IO_ExcpStat_ADDR_Mask
);
249 /* clear interrupt */
250 stat
&= ~IOC_IO_ExcpStat_V
;
251 out_be64(iommu
->xlate_regs
+ IOC_IO_ExcpStat
, stat
);
256 static int cell_iommu_find_ioc(int nid
, unsigned long *base
)
258 struct device_node
*np
;
263 /* First look for new style /be nodes */
264 for_each_node_by_name(np
, "ioc") {
265 if (of_node_to_nid(np
) != nid
)
267 if (of_address_to_resource(np
, 0, &r
)) {
268 printk(KERN_ERR
"iommu: can't get address for %pOF\n",
277 /* Ok, let's try the old way */
278 for_each_node_by_type(np
, "cpu") {
279 const unsigned int *nidp
;
280 const unsigned long *tmp
;
282 nidp
= of_get_property(np
, "node-id", NULL
);
283 if (nidp
&& *nidp
== nid
) {
284 tmp
= of_get_property(np
, "ioc-translation", NULL
);
296 static void cell_iommu_setup_stab(struct cbe_iommu
*iommu
,
297 unsigned long dbase
, unsigned long dsize
,
298 unsigned long fbase
, unsigned long fsize
)
301 unsigned long segments
, stab_size
;
303 segments
= max(dbase
+ dsize
, fbase
+ fsize
) >> IO_SEGMENT_SHIFT
;
305 pr_debug("%s: iommu[%d]: segments: %lu\n",
306 __func__
, iommu
->nid
, segments
);
308 /* set up the segment table */
309 stab_size
= segments
* sizeof(unsigned long);
310 page
= alloc_pages_node(iommu
->nid
, GFP_KERNEL
, get_order(stab_size
));
312 iommu
->stab
= page_address(page
);
313 memset(iommu
->stab
, 0, stab_size
);
316 static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu
*iommu
,
317 unsigned long base
, unsigned long size
, unsigned long gap_base
,
318 unsigned long gap_size
, unsigned long page_shift
)
322 unsigned long reg
, segments
, pages_per_segment
, ptab_size
,
323 n_pte_pages
, start_seg
, *ptab
;
325 start_seg
= base
>> IO_SEGMENT_SHIFT
;
326 segments
= size
>> IO_SEGMENT_SHIFT
;
327 pages_per_segment
= 1ull << IO_PAGENO_BITS(page_shift
);
328 /* PTEs for each segment must start on a 4K boundary */
329 pages_per_segment
= max(pages_per_segment
,
330 (1 << 12) / sizeof(unsigned long));
332 ptab_size
= segments
* pages_per_segment
* sizeof(unsigned long);
333 pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__
,
334 iommu
->nid
, ptab_size
, get_order(ptab_size
));
335 page
= alloc_pages_node(iommu
->nid
, GFP_KERNEL
, get_order(ptab_size
));
338 ptab
= page_address(page
);
339 memset(ptab
, 0, ptab_size
);
341 /* number of 4K pages needed for a page table */
342 n_pte_pages
= (pages_per_segment
* sizeof(unsigned long)) >> 12;
344 pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
345 __func__
, iommu
->nid
, iommu
->stab
, ptab
,
348 /* initialise the STEs */
349 reg
= IOSTE_V
| ((n_pte_pages
- 1) << 5);
351 switch (page_shift
) {
352 case 12: reg
|= IOSTE_PS_4K
; break;
353 case 16: reg
|= IOSTE_PS_64K
; break;
354 case 20: reg
|= IOSTE_PS_1M
; break;
355 case 24: reg
|= IOSTE_PS_16M
; break;
359 gap_base
= gap_base
>> IO_SEGMENT_SHIFT
;
360 gap_size
= gap_size
>> IO_SEGMENT_SHIFT
;
362 pr_debug("Setting up IOMMU stab:\n");
363 for (i
= start_seg
; i
< (start_seg
+ segments
); i
++) {
364 if (i
>= gap_base
&& i
< (gap_base
+ gap_size
)) {
365 pr_debug("\toverlap at %d, skipping\n", i
);
368 iommu
->stab
[i
] = reg
| (__pa(ptab
) + (n_pte_pages
<< 12) *
370 pr_debug("\t[%d] 0x%016lx\n", i
, iommu
->stab
[i
]);
376 static void cell_iommu_enable_hardware(struct cbe_iommu
*iommu
)
379 unsigned long reg
, xlate_base
;
382 if (cell_iommu_find_ioc(iommu
->nid
, &xlate_base
))
383 panic("%s: missing IOC register mappings for node %d\n",
384 __func__
, iommu
->nid
);
386 iommu
->xlate_regs
= ioremap(xlate_base
, IOC_Reg_Size
);
387 iommu
->cmd_regs
= iommu
->xlate_regs
+ IOC_IOCmd_Offset
;
389 /* ensure that the STEs have updated */
392 /* setup interrupts for the iommu. */
393 reg
= in_be64(iommu
->xlate_regs
+ IOC_IO_ExcpStat
);
394 out_be64(iommu
->xlate_regs
+ IOC_IO_ExcpStat
,
395 reg
& ~IOC_IO_ExcpStat_V
);
396 out_be64(iommu
->xlate_regs
+ IOC_IO_ExcpMask
,
397 IOC_IO_ExcpMask_PFE
| IOC_IO_ExcpMask_SFE
);
399 virq
= irq_create_mapping(NULL
,
400 IIC_IRQ_IOEX_ATI
| (iommu
->nid
<< IIC_IRQ_NODE_SHIFT
));
403 ret
= request_irq(virq
, ioc_interrupt
, 0, iommu
->name
, iommu
);
406 /* set the IOC segment table origin register (and turn on the iommu) */
407 reg
= IOC_IOST_Origin_E
| __pa(iommu
->stab
) | IOC_IOST_Origin_HW
;
408 out_be64(iommu
->xlate_regs
+ IOC_IOST_Origin
, reg
);
409 in_be64(iommu
->xlate_regs
+ IOC_IOST_Origin
);
411 /* turn on IO translation */
412 reg
= in_be64(iommu
->cmd_regs
+ IOC_IOCmd_Cfg
) | IOC_IOCmd_Cfg_TE
;
413 out_be64(iommu
->cmd_regs
+ IOC_IOCmd_Cfg
, reg
);
416 static void cell_iommu_setup_hardware(struct cbe_iommu
*iommu
,
417 unsigned long base
, unsigned long size
)
419 cell_iommu_setup_stab(iommu
, base
, size
, 0, 0);
420 iommu
->ptab
= cell_iommu_alloc_ptab(iommu
, base
, size
, 0, 0,
421 IOMMU_PAGE_SHIFT_4K
);
422 cell_iommu_enable_hardware(iommu
);
425 #if 0/* Unused for now */
426 static struct iommu_window
*find_window(struct cbe_iommu
*iommu
,
427 unsigned long offset
, unsigned long size
)
429 struct iommu_window
*window
;
431 /* todo: check for overlapping (but not equal) windows) */
433 list_for_each_entry(window
, &(iommu
->windows
), list
) {
434 if (window
->offset
== offset
&& window
->size
== size
)
442 static inline u32
cell_iommu_get_ioid(struct device_node
*np
)
446 ioid
= of_get_property(np
, "ioid", NULL
);
448 printk(KERN_WARNING
"iommu: missing ioid for %pOF using 0\n",
456 static struct iommu_table_ops cell_iommu_ops
= {
457 .set
= tce_build_cell
,
458 .clear
= tce_free_cell
461 static struct iommu_window
* __init
462 cell_iommu_setup_window(struct cbe_iommu
*iommu
, struct device_node
*np
,
463 unsigned long offset
, unsigned long size
,
464 unsigned long pte_offset
)
466 struct iommu_window
*window
;
470 ioid
= cell_iommu_get_ioid(np
);
472 window
= kzalloc_node(sizeof(*window
), GFP_KERNEL
, iommu
->nid
);
473 BUG_ON(window
== NULL
);
475 window
->offset
= offset
;
478 window
->iommu
= iommu
;
480 window
->table
.it_blocksize
= 16;
481 window
->table
.it_base
= (unsigned long)iommu
->ptab
;
482 window
->table
.it_index
= iommu
->nid
;
483 window
->table
.it_page_shift
= IOMMU_PAGE_SHIFT_4K
;
484 window
->table
.it_offset
=
485 (offset
>> window
->table
.it_page_shift
) + pte_offset
;
486 window
->table
.it_size
= size
>> window
->table
.it_page_shift
;
487 window
->table
.it_ops
= &cell_iommu_ops
;
489 iommu_init_table(&window
->table
, iommu
->nid
, 0, 0);
491 pr_debug("\tioid %d\n", window
->ioid
);
492 pr_debug("\tblocksize %ld\n", window
->table
.it_blocksize
);
493 pr_debug("\tbase 0x%016lx\n", window
->table
.it_base
);
494 pr_debug("\toffset 0x%lx\n", window
->table
.it_offset
);
495 pr_debug("\tsize %ld\n", window
->table
.it_size
);
497 list_add(&window
->list
, &iommu
->windows
);
502 /* We need to map and reserve the first IOMMU page since it's used
503 * by the spider workaround. In theory, we only need to do that when
504 * running on spider but it doesn't really matter.
506 * This code also assumes that we have a window that starts at 0,
507 * which is the case on all spider based blades.
509 page
= alloc_pages_node(iommu
->nid
, GFP_KERNEL
, 0);
511 iommu
->pad_page
= page_address(page
);
512 clear_page(iommu
->pad_page
);
514 __set_bit(0, window
->table
.it_map
);
515 tce_build_cell(&window
->table
, window
->table
.it_offset
, 1,
516 (unsigned long)iommu
->pad_page
, DMA_TO_DEVICE
, 0);
521 static struct cbe_iommu
*cell_iommu_for_node(int nid
)
525 for (i
= 0; i
< cbe_nr_iommus
; i
++)
526 if (iommus
[i
].nid
== nid
)
531 static unsigned long cell_dma_nommu_offset
;
533 static unsigned long dma_iommu_fixed_base
;
534 static bool cell_iommu_enabled
;
536 /* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
537 bool iommu_fixed_is_weak
;
539 static struct iommu_table
*cell_get_iommu_table(struct device
*dev
)
541 struct iommu_window
*window
;
542 struct cbe_iommu
*iommu
;
544 /* Current implementation uses the first window available in that
545 * node's iommu. We -might- do something smarter later though it may
548 iommu
= cell_iommu_for_node(dev_to_node(dev
));
549 if (iommu
== NULL
|| list_empty(&iommu
->windows
)) {
550 dev_err(dev
, "iommu: missing iommu for %pOF (node %d)\n",
551 dev
->of_node
, dev_to_node(dev
));
554 window
= list_entry(iommu
->windows
.next
, struct iommu_window
, list
);
556 return &window
->table
;
559 static u64
cell_iommu_get_fixed_address(struct device
*dev
);
561 static void cell_dma_dev_setup(struct device
*dev
)
563 if (cell_iommu_enabled
) {
564 u64 addr
= cell_iommu_get_fixed_address(dev
);
566 if (addr
!= OF_BAD_ADDR
)
567 dev
->archdata
.dma_offset
= addr
+ dma_iommu_fixed_base
;
568 set_iommu_table_base(dev
, cell_get_iommu_table(dev
));
570 dev
->archdata
.dma_offset
= cell_dma_nommu_offset
;
574 static void cell_pci_dma_dev_setup(struct pci_dev
*dev
)
576 cell_dma_dev_setup(&dev
->dev
);
579 static int cell_of_bus_notify(struct notifier_block
*nb
, unsigned long action
,
582 struct device
*dev
= data
;
584 /* We are only intereted in device addition */
585 if (action
!= BUS_NOTIFY_ADD_DEVICE
)
588 if (cell_iommu_enabled
)
589 dev
->dma_ops
= &dma_iommu_ops
;
590 cell_dma_dev_setup(dev
);
594 static struct notifier_block cell_of_bus_notifier
= {
595 .notifier_call
= cell_of_bus_notify
598 static int __init
cell_iommu_get_window(struct device_node
*np
,
602 const __be32
*dma_window
;
605 /* Use ibm,dma-window if available, else, hard code ! */
606 dma_window
= of_get_property(np
, "ibm,dma-window", NULL
);
607 if (dma_window
== NULL
) {
613 of_parse_dma_window(np
, dma_window
, &index
, base
, size
);
617 static struct cbe_iommu
* __init
cell_iommu_alloc(struct device_node
*np
)
619 struct cbe_iommu
*iommu
;
623 nid
= of_node_to_nid(np
);
625 printk(KERN_ERR
"iommu: failed to get node for %pOF\n",
629 pr_debug("iommu: setting up iommu for node %d (%pOF)\n",
632 /* XXX todo: If we can have multiple windows on the same IOMMU, which
633 * isn't the case today, we probably want here to check whether the
634 * iommu for that node is already setup.
635 * However, there might be issue with getting the size right so let's
636 * ignore that for now. We might want to completely get rid of the
637 * multiple window support since the cell iommu supports per-page ioids
640 if (cbe_nr_iommus
>= NR_IOMMUS
) {
641 printk(KERN_ERR
"iommu: too many IOMMUs detected ! (%pOF)\n",
646 /* Init base fields */
651 snprintf(iommu
->name
, sizeof(iommu
->name
), "iommu%d", i
);
652 INIT_LIST_HEAD(&iommu
->windows
);
657 static void __init
cell_iommu_init_one(struct device_node
*np
,
658 unsigned long offset
)
660 struct cbe_iommu
*iommu
;
661 unsigned long base
, size
;
663 iommu
= cell_iommu_alloc(np
);
667 /* Obtain a window for it */
668 cell_iommu_get_window(np
, &base
, &size
);
670 pr_debug("\ttranslating window 0x%lx...0x%lx\n",
671 base
, base
+ size
- 1);
673 /* Initialize the hardware */
674 cell_iommu_setup_hardware(iommu
, base
, size
);
676 /* Setup the iommu_table */
677 cell_iommu_setup_window(iommu
, np
, base
, size
,
678 offset
>> IOMMU_PAGE_SHIFT_4K
);
681 static void __init
cell_disable_iommus(void)
684 unsigned long base
, val
;
685 void __iomem
*xregs
, *cregs
;
687 /* Make sure IOC translation is disabled on all nodes */
688 for_each_online_node(node
) {
689 if (cell_iommu_find_ioc(node
, &base
))
691 xregs
= ioremap(base
, IOC_Reg_Size
);
694 cregs
= xregs
+ IOC_IOCmd_Offset
;
696 pr_debug("iommu: cleaning up iommu on node %d\n", node
);
698 out_be64(xregs
+ IOC_IOST_Origin
, 0);
699 (void)in_be64(xregs
+ IOC_IOST_Origin
);
700 val
= in_be64(cregs
+ IOC_IOCmd_Cfg
);
701 val
&= ~IOC_IOCmd_Cfg_TE
;
702 out_be64(cregs
+ IOC_IOCmd_Cfg
, val
);
703 (void)in_be64(cregs
+ IOC_IOCmd_Cfg
);
709 static int __init
cell_iommu_init_disabled(void)
711 struct device_node
*np
= NULL
;
712 unsigned long base
= 0, size
;
714 /* When no iommu is present, we use direct DMA ops */
716 /* First make sure all IOC translation is turned off */
717 cell_disable_iommus();
719 /* If we have no Axon, we set up the spider DMA magic offset */
720 if (of_find_node_by_name(NULL
, "axon") == NULL
)
721 cell_dma_nommu_offset
= SPIDER_DMA_OFFSET
;
723 /* Now we need to check to see where the memory is mapped
724 * in PCI space. We assume that all busses use the same dma
725 * window which is always the case so far on Cell, thus we
726 * pick up the first pci-internal node we can find and check
727 * the DMA window from there.
729 for_each_node_by_name(np
, "axon") {
730 if (np
->parent
== NULL
|| np
->parent
->parent
!= NULL
)
732 if (cell_iommu_get_window(np
, &base
, &size
) == 0)
736 for_each_node_by_name(np
, "pci-internal") {
737 if (np
->parent
== NULL
|| np
->parent
->parent
!= NULL
)
739 if (cell_iommu_get_window(np
, &base
, &size
) == 0)
745 /* If we found a DMA window, we check if it's big enough to enclose
746 * all of physical memory. If not, we force enable IOMMU
748 if (np
&& size
< memblock_end_of_DRAM()) {
749 printk(KERN_WARNING
"iommu: force-enabled, dma window"
750 " (%ldMB) smaller than total memory (%lldMB)\n",
751 size
>> 20, memblock_end_of_DRAM() >> 20);
755 cell_dma_nommu_offset
+= base
;
757 if (cell_dma_nommu_offset
!= 0)
758 cell_pci_controller_ops
.dma_dev_setup
= cell_pci_dma_dev_setup
;
760 printk("iommu: disabled, direct DMA offset is 0x%lx\n",
761 cell_dma_nommu_offset
);
767 * Fixed IOMMU mapping support
769 * This code adds support for setting up a fixed IOMMU mapping on certain
770 * cell machines. For 64-bit devices this avoids the performance overhead of
771 * mapping and unmapping pages at runtime. 32-bit devices are unable to use
774 * The fixed mapping is established at boot, and maps all of physical memory
775 * 1:1 into device space at some offset. On machines with < 30 GB of memory
776 * we setup the fixed mapping immediately above the normal IOMMU window.
778 * For example a machine with 4GB of memory would end up with the normal
779 * IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In
780 * this case a 64-bit device wishing to DMA to 1GB would be told to DMA to
781 * 3GB, plus any offset required by firmware. The firmware offset is encoded
782 * in the "dma-ranges" property.
784 * On machines with 30GB or more of memory, we are unable to place the fixed
785 * mapping above the normal IOMMU window as we would run out of address space.
786 * Instead we move the normal IOMMU window to coincide with the hash page
787 * table, this region does not need to be part of the fixed mapping as no
788 * device should ever be DMA'ing to it. We then setup the fixed mapping
792 static u64
cell_iommu_get_fixed_address(struct device
*dev
)
794 u64 cpu_addr
, size
, best_size
, dev_addr
= OF_BAD_ADDR
;
795 struct device_node
*np
;
796 const u32
*ranges
= NULL
;
797 int i
, len
, best
, naddr
, nsize
, pna
, range_size
;
799 /* We can be called for platform devices that have no of_node */
800 np
= of_node_get(dev
->of_node
);
805 naddr
= of_n_addr_cells(np
);
806 nsize
= of_n_size_cells(np
);
807 np
= of_get_next_parent(np
);
811 ranges
= of_get_property(np
, "dma-ranges", &len
);
813 /* Ignore empty ranges, they imply no translation required */
814 if (ranges
&& len
> 0)
819 dev_dbg(dev
, "iommu: no dma-ranges found\n");
825 pna
= of_n_addr_cells(np
);
826 range_size
= naddr
+ nsize
+ pna
;
828 /* dma-ranges format:
829 * child addr : naddr cells
830 * parent addr : pna cells
833 for (i
= 0, best
= -1, best_size
= 0; i
< len
; i
+= range_size
) {
834 cpu_addr
= of_translate_dma_address(np
, ranges
+ i
+ naddr
);
835 size
= of_read_number(ranges
+ i
+ naddr
+ pna
, nsize
);
837 if (cpu_addr
== 0 && size
> best_size
) {
844 dev_addr
= of_read_number(ranges
+ best
, naddr
);
846 dev_dbg(dev
, "iommu: no suitable range found!\n");
854 static bool cell_pci_iommu_bypass_supported(struct pci_dev
*pdev
, u64 mask
)
856 return mask
== DMA_BIT_MASK(64) &&
857 cell_iommu_get_fixed_address(&pdev
->dev
) != OF_BAD_ADDR
;
860 static void insert_16M_pte(unsigned long addr
, unsigned long *ptab
,
861 unsigned long base_pte
)
863 unsigned long segment
, offset
;
865 segment
= addr
>> IO_SEGMENT_SHIFT
;
866 offset
= (addr
>> 24) - (segment
<< IO_PAGENO_BITS(24));
867 ptab
= ptab
+ (segment
* (1 << 12) / sizeof(unsigned long));
869 pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
870 addr
, ptab
, segment
, offset
);
872 ptab
[offset
] = base_pte
| (__pa(addr
) & CBE_IOPTE_RPN_Mask
);
875 static void cell_iommu_setup_fixed_ptab(struct cbe_iommu
*iommu
,
876 struct device_node
*np
, unsigned long dbase
, unsigned long dsize
,
877 unsigned long fbase
, unsigned long fsize
)
879 unsigned long base_pte
, uaddr
, ioaddr
, *ptab
;
881 ptab
= cell_iommu_alloc_ptab(iommu
, fbase
, fsize
, dbase
, dsize
, 24);
883 dma_iommu_fixed_base
= fbase
;
885 pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize
, fbase
);
887 base_pte
= CBE_IOPTE_PP_W
| CBE_IOPTE_PP_R
| CBE_IOPTE_M
|
888 (cell_iommu_get_ioid(np
) & CBE_IOPTE_IOID_Mask
);
890 if (iommu_fixed_is_weak
)
891 pr_info("IOMMU: Using weak ordering for fixed mapping\n");
893 pr_info("IOMMU: Using strong ordering for fixed mapping\n");
894 base_pte
|= CBE_IOPTE_SO_RW
;
897 for (uaddr
= 0; uaddr
< fsize
; uaddr
+= (1 << 24)) {
898 /* Don't touch the dynamic region */
899 ioaddr
= uaddr
+ fbase
;
900 if (ioaddr
>= dbase
&& ioaddr
< (dbase
+ dsize
)) {
901 pr_debug("iommu: fixed/dynamic overlap, skipping\n");
905 insert_16M_pte(uaddr
, ptab
, base_pte
);
911 static int __init
cell_iommu_fixed_mapping_init(void)
913 unsigned long dbase
, dsize
, fbase
, fsize
, hbase
, hend
;
914 struct cbe_iommu
*iommu
;
915 struct device_node
*np
;
917 /* The fixed mapping is only supported on axon machines */
918 np
= of_find_node_by_name(NULL
, "axon");
922 pr_debug("iommu: fixed mapping disabled, no axons found\n");
926 /* We must have dma-ranges properties for fixed mapping to work */
927 np
= of_find_node_with_property(NULL
, "dma-ranges");
931 pr_debug("iommu: no dma-ranges found, no fixed mapping\n");
935 /* The default setup is to have the fixed mapping sit after the
936 * dynamic region, so find the top of the largest IOMMU window
937 * on any axon, then add the size of RAM and that's our max value.
938 * If that is > 32GB we have to do other shennanigans.
941 for_each_node_by_name(np
, "axon") {
942 cell_iommu_get_window(np
, &dbase
, &dsize
);
943 fbase
= max(fbase
, dbase
+ dsize
);
946 fbase
= ALIGN(fbase
, 1 << IO_SEGMENT_SHIFT
);
947 fsize
= memblock_phys_mem_size();
949 if ((fbase
+ fsize
) <= 0x800000000ul
)
950 hbase
= 0; /* use the device tree window */
952 /* If we're over 32 GB we need to cheat. We can't map all of
953 * RAM with the fixed mapping, and also fit the dynamic
954 * region. So try to place the dynamic region where the hash
955 * table sits, drivers never need to DMA to it, we don't
956 * need a fixed mapping for that area.
959 pr_debug("iommu: htab is NULL, on LPAR? Huh?\n");
962 hbase
= __pa(htab_address
);
963 hend
= hbase
+ htab_size_bytes
;
965 /* The window must start and end on a segment boundary */
966 if ((hbase
!= ALIGN(hbase
, 1 << IO_SEGMENT_SHIFT
)) ||
967 (hend
!= ALIGN(hend
, 1 << IO_SEGMENT_SHIFT
))) {
968 pr_debug("iommu: hash window not segment aligned\n");
972 /* Check the hash window fits inside the real DMA window */
973 for_each_node_by_name(np
, "axon") {
974 cell_iommu_get_window(np
, &dbase
, &dsize
);
976 if (hbase
< dbase
|| (hend
> (dbase
+ dsize
))) {
977 pr_debug("iommu: hash window doesn't fit in"
978 "real DMA window\n");
986 /* Setup the dynamic regions */
987 for_each_node_by_name(np
, "axon") {
988 iommu
= cell_iommu_alloc(np
);
992 cell_iommu_get_window(np
, &dbase
, &dsize
);
995 dsize
= htab_size_bytes
;
998 printk(KERN_DEBUG
"iommu: node %d, dynamic window 0x%lx-0x%lx "
999 "fixed window 0x%lx-0x%lx\n", iommu
->nid
, dbase
,
1000 dbase
+ dsize
, fbase
, fbase
+ fsize
);
1002 cell_iommu_setup_stab(iommu
, dbase
, dsize
, fbase
, fsize
);
1003 iommu
->ptab
= cell_iommu_alloc_ptab(iommu
, dbase
, dsize
, 0, 0,
1004 IOMMU_PAGE_SHIFT_4K
);
1005 cell_iommu_setup_fixed_ptab(iommu
, np
, dbase
, dsize
,
1007 cell_iommu_enable_hardware(iommu
);
1008 cell_iommu_setup_window(iommu
, np
, dbase
, dsize
, 0);
1011 cell_pci_controller_ops
.iommu_bypass_supported
=
1012 cell_pci_iommu_bypass_supported
;
1016 static int iommu_fixed_disabled
;
1018 static int __init
setup_iommu_fixed(char *str
)
1020 struct device_node
*pciep
;
1022 if (strcmp(str
, "off") == 0)
1023 iommu_fixed_disabled
= 1;
1025 /* If we can find a pcie-endpoint in the device tree assume that
1026 * we're on a triblade or a CAB so by default the fixed mapping
1027 * should be set to be weakly ordered; but only if the boot
1028 * option WASN'T set for strong ordering
1030 pciep
= of_find_node_by_type(NULL
, "pcie-endpoint");
1032 if (strcmp(str
, "weak") == 0 || (pciep
&& strcmp(str
, "strong") != 0))
1033 iommu_fixed_is_weak
= true;
1039 __setup("iommu_fixed=", setup_iommu_fixed
);
1041 static int __init
cell_iommu_init(void)
1043 struct device_node
*np
;
1045 /* If IOMMU is disabled or we have little enough RAM to not need
1046 * to enable it, we setup a direct mapping.
1048 * Note: should we make sure we have the IOMMU actually disabled ?
1051 (!iommu_force_on
&& memblock_end_of_DRAM() <= 0x80000000ull
))
1052 if (cell_iommu_init_disabled() == 0)
1055 /* Setup various callbacks */
1056 cell_pci_controller_ops
.dma_dev_setup
= cell_pci_dma_dev_setup
;
1058 if (!iommu_fixed_disabled
&& cell_iommu_fixed_mapping_init() == 0)
1061 /* Create an iommu for each /axon node. */
1062 for_each_node_by_name(np
, "axon") {
1063 if (np
->parent
== NULL
|| np
->parent
->parent
!= NULL
)
1065 cell_iommu_init_one(np
, 0);
1068 /* Create an iommu for each toplevel /pci-internal node for
1069 * old hardware/firmware
1071 for_each_node_by_name(np
, "pci-internal") {
1072 if (np
->parent
== NULL
|| np
->parent
->parent
!= NULL
)
1074 cell_iommu_init_one(np
, SPIDER_DMA_OFFSET
);
1077 /* Setup default PCI iommu ops */
1078 set_pci_dma_ops(&dma_iommu_ops
);
1079 cell_iommu_enabled
= true;
1081 /* Register callbacks on OF platform device addition/removal
1082 * to handle linking them to the right DMA operations
1084 bus_register_notifier(&platform_bus_type
, &cell_of_bus_notifier
);
1088 machine_arch_initcall(cell
, cell_iommu_init
);