WIP FPC-III support
[linux/fpc-iii.git] / arch / powerpc / platforms / pasemi / setup.c
blobb612474f8f8e6f576f3f6fe2b76fab725a374374
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2006-2007 PA Semi, Inc
5 * Authors: Kip Walker, PA Semi
6 * Olof Johansson, PA Semi
8 * Maintained by: Olof Johansson <olof@lixom.net>
10 * Based on arch/powerpc/platforms/maple/setup.c
13 #include <linux/errno.h>
14 #include <linux/kernel.h>
15 #include <linux/delay.h>
16 #include <linux/console.h>
17 #include <linux/export.h>
18 #include <linux/pci.h>
19 #include <linux/of_platform.h>
20 #include <linux/gfp.h>
22 #include <asm/prom.h>
23 #include <asm/iommu.h>
24 #include <asm/machdep.h>
25 #include <asm/i8259.h>
26 #include <asm/mpic.h>
27 #include <asm/smp.h>
28 #include <asm/time.h>
29 #include <asm/mmu.h>
30 #include <asm/debug.h>
32 #include <pcmcia/ss.h>
33 #include <pcmcia/cistpl.h>
34 #include <pcmcia/ds.h>
36 #include "pasemi.h"
38 /* SDC reset register, must be pre-mapped at reset time */
39 static void __iomem *reset_reg;
41 /* Various error status registers, must be pre-mapped at MCE time */
43 #define MAX_MCE_REGS 32
44 struct mce_regs {
45 char *name;
46 void __iomem *addr;
49 static struct mce_regs mce_regs[MAX_MCE_REGS];
50 static int num_mce_regs;
51 static int nmi_virq = 0;
54 static void __noreturn pas_restart(char *cmd)
56 /* Need to put others cpu in hold loop so they're not sleeping */
57 smp_send_stop();
58 udelay(10000);
59 printk("Restarting...\n");
60 while (1)
61 out_le32(reset_reg, 0x6000000);
64 #ifdef CONFIG_PPC_PASEMI_NEMO
65 void pas_shutdown(void)
67 /* Set the PLD bit that makes the SB600 think the power button is being pressed */
68 void __iomem *pld_map = ioremap(0xf5000000,4096);
69 while (1)
70 out_8(pld_map+7,0x01);
73 /* RTC platform device structure as is not in device tree */
74 static struct resource rtc_resource[] = {{
75 .name = "rtc",
76 .start = 0x70,
77 .end = 0x71,
78 .flags = IORESOURCE_IO,
79 }, {
80 .name = "rtc",
81 .start = 8,
82 .end = 8,
83 .flags = IORESOURCE_IRQ,
84 }};
86 static inline void nemo_init_rtc(void)
88 platform_device_register_simple("rtc_cmos", -1, rtc_resource, 2);
91 #else
93 static inline void nemo_init_rtc(void)
96 #endif
98 #ifdef CONFIG_SMP
99 static arch_spinlock_t timebase_lock;
100 static unsigned long timebase;
102 static void pas_give_timebase(void)
104 unsigned long flags;
106 local_irq_save(flags);
107 hard_irq_disable();
108 arch_spin_lock(&timebase_lock);
109 mtspr(SPRN_TBCTL, TBCTL_FREEZE);
110 isync();
111 timebase = get_tb();
112 arch_spin_unlock(&timebase_lock);
114 while (timebase)
115 barrier();
116 mtspr(SPRN_TBCTL, TBCTL_RESTART);
117 local_irq_restore(flags);
120 static void pas_take_timebase(void)
122 while (!timebase)
123 smp_rmb();
125 arch_spin_lock(&timebase_lock);
126 set_tb(timebase >> 32, timebase & 0xffffffff);
127 timebase = 0;
128 arch_spin_unlock(&timebase_lock);
131 static struct smp_ops_t pas_smp_ops = {
132 .probe = smp_mpic_probe,
133 .message_pass = smp_mpic_message_pass,
134 .kick_cpu = smp_generic_kick_cpu,
135 .setup_cpu = smp_mpic_setup_cpu,
136 .give_timebase = pas_give_timebase,
137 .take_timebase = pas_take_timebase,
139 #endif /* CONFIG_SMP */
141 static void __init pas_setup_arch(void)
143 #ifdef CONFIG_SMP
144 /* Setup SMP callback */
145 smp_ops = &pas_smp_ops;
146 #endif
147 /* Lookup PCI hosts */
148 pas_pci_init();
150 /* Remap SDC register for doing reset */
151 /* XXXOJN This should maybe come out of the device tree */
152 reset_reg = ioremap(0xfc101100, 4);
155 static int __init pas_setup_mce_regs(void)
157 struct pci_dev *dev;
158 int reg;
160 /* Remap various SoC status registers for use by the MCE handler */
162 reg = 0;
164 dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL);
165 while (dev && reg < MAX_MCE_REGS) {
166 mce_regs[reg].name = kasprintf(GFP_KERNEL,
167 "mc%d_mcdebug_errsta", reg);
168 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730);
169 dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev);
170 reg++;
173 dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
174 if (dev && reg+4 < MAX_MCE_REGS) {
175 mce_regs[reg].name = "iobdbg_IntStatus1";
176 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438);
177 reg++;
178 mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg";
179 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454);
180 reg++;
181 mce_regs[reg].name = "iobiom_IntStatus";
182 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10);
183 reg++;
184 mce_regs[reg].name = "iobiom_IntDbgReg";
185 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c);
186 reg++;
189 dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL);
190 if (dev && reg+2 < MAX_MCE_REGS) {
191 mce_regs[reg].name = "l2csts_IntStatus";
192 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200);
193 reg++;
194 mce_regs[reg].name = "l2csts_Cnt";
195 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214);
196 reg++;
199 num_mce_regs = reg;
201 return 0;
203 machine_device_initcall(pasemi, pas_setup_mce_regs);
205 #ifdef CONFIG_PPC_PASEMI_NEMO
206 static void sb600_8259_cascade(struct irq_desc *desc)
208 struct irq_chip *chip = irq_desc_get_chip(desc);
209 unsigned int cascade_irq = i8259_irq();
211 if (cascade_irq)
212 generic_handle_irq(cascade_irq);
214 chip->irq_eoi(&desc->irq_data);
217 static void nemo_init_IRQ(struct mpic *mpic)
219 struct device_node *np;
220 int gpio_virq;
221 /* Connect the SB600's legacy i8259 controller */
222 np = of_find_node_by_path("/pxp@0,e0000000");
223 i8259_init(np, 0);
224 of_node_put(np);
226 gpio_virq = irq_create_mapping(NULL, 3);
227 irq_set_irq_type(gpio_virq, IRQ_TYPE_LEVEL_HIGH);
228 irq_set_chained_handler(gpio_virq, sb600_8259_cascade);
229 mpic_unmask_irq(irq_get_irq_data(gpio_virq));
231 irq_set_default_host(mpic->irqhost);
234 #else
236 static inline void nemo_init_IRQ(struct mpic *mpic)
239 #endif
241 static __init void pas_init_IRQ(void)
243 struct device_node *np;
244 struct device_node *root, *mpic_node;
245 unsigned long openpic_addr;
246 const unsigned int *opprop;
247 int naddr, opplen;
248 int mpic_flags;
249 const unsigned int *nmiprop;
250 struct mpic *mpic;
252 mpic_node = NULL;
254 for_each_node_by_type(np, "interrupt-controller")
255 if (of_device_is_compatible(np, "open-pic")) {
256 mpic_node = np;
257 break;
259 if (!mpic_node)
260 for_each_node_by_type(np, "open-pic") {
261 mpic_node = np;
262 break;
264 if (!mpic_node) {
265 pr_err("Failed to locate the MPIC interrupt controller\n");
266 return;
269 /* Find address list in /platform-open-pic */
270 root = of_find_node_by_path("/");
271 naddr = of_n_addr_cells(root);
272 opprop = of_get_property(root, "platform-open-pic", &opplen);
273 if (!opprop) {
274 pr_err("No platform-open-pic property.\n");
275 of_node_put(root);
276 return;
278 openpic_addr = of_read_number(opprop, naddr);
279 pr_debug("OpenPIC addr: %lx\n", openpic_addr);
281 mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET;
283 nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
284 if (nmiprop)
285 mpic_flags |= MPIC_ENABLE_MCK;
287 mpic = mpic_alloc(mpic_node, openpic_addr,
288 mpic_flags, 0, 0, "PASEMI-OPIC");
289 BUG_ON(!mpic);
291 mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000);
292 mpic_init(mpic);
293 /* The NMI/MCK source needs to be prio 15 */
294 if (nmiprop) {
295 nmi_virq = irq_create_mapping(NULL, *nmiprop);
296 mpic_irq_set_priority(nmi_virq, 15);
297 irq_set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING);
298 mpic_unmask_irq(irq_get_irq_data(nmi_virq));
301 nemo_init_IRQ(mpic);
303 of_node_put(mpic_node);
304 of_node_put(root);
307 static void __init pas_progress(char *s, unsigned short hex)
309 printk("[%04x] : %s\n", hex, s ? s : "");
313 static int pas_machine_check_handler(struct pt_regs *regs)
315 int cpu = smp_processor_id();
316 unsigned long srr0, srr1, dsisr;
317 int dump_slb = 0;
318 int i;
320 srr0 = regs->nip;
321 srr1 = regs->msr;
323 if (nmi_virq && mpic_get_mcirq() == nmi_virq) {
324 pr_err("NMI delivered\n");
325 debugger(regs);
326 mpic_end_irq(irq_get_irq_data(nmi_virq));
327 goto out;
330 dsisr = mfspr(SPRN_DSISR);
331 pr_err("Machine Check on CPU %d\n", cpu);
332 pr_err("SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1);
333 pr_err("DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar);
334 pr_err("BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER),
335 mfspr(SPRN_PA6T_MER));
336 pr_err("IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER),
337 mfspr(SPRN_PA6T_DER));
338 pr_err("Cause:\n");
340 if (srr1 & 0x200000)
341 pr_err("Signalled by SDC\n");
343 if (srr1 & 0x100000) {
344 pr_err("Load/Store detected error:\n");
345 if (dsisr & 0x8000)
346 pr_err("D-cache ECC double-bit error or bus error\n");
347 if (dsisr & 0x4000)
348 pr_err("LSU snoop response error\n");
349 if (dsisr & 0x2000) {
350 pr_err("MMU SLB multi-hit or invalid B field\n");
351 dump_slb = 1;
353 if (dsisr & 0x1000)
354 pr_err("Recoverable Duptags\n");
355 if (dsisr & 0x800)
356 pr_err("Recoverable D-cache parity error count overflow\n");
357 if (dsisr & 0x400)
358 pr_err("TLB parity error count overflow\n");
361 if (srr1 & 0x80000)
362 pr_err("Bus Error\n");
364 if (srr1 & 0x40000) {
365 pr_err("I-side SLB multiple hit\n");
366 dump_slb = 1;
369 if (srr1 & 0x20000)
370 pr_err("I-cache parity error hit\n");
372 if (num_mce_regs == 0)
373 pr_err("No MCE registers mapped yet, can't dump\n");
374 else
375 pr_err("SoC debug registers:\n");
377 for (i = 0; i < num_mce_regs; i++)
378 pr_err("%s: 0x%08x\n", mce_regs[i].name,
379 in_le32(mce_regs[i].addr));
381 if (dump_slb) {
382 unsigned long e, v;
383 int i;
385 pr_err("slb contents:\n");
386 for (i = 0; i < mmu_slb_size; i++) {
387 asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i));
388 asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i));
389 pr_err("%02d %016lx %016lx\n", i, e, v);
393 out:
394 /* SRR1[62] is from MSR[62] if recoverable, so pass that back */
395 return !!(srr1 & 0x2);
398 static const struct of_device_id pasemi_bus_ids[] = {
399 /* Unfortunately needed for legacy firmwares */
400 { .type = "localbus", },
401 { .type = "sdc", },
402 /* These are the proper entries, which newer firmware uses */
403 { .compatible = "pasemi,localbus", },
404 { .compatible = "pasemi,sdc", },
408 static int __init pasemi_publish_devices(void)
410 /* Publish OF platform devices for SDC and other non-PCI devices */
411 of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
413 nemo_init_rtc();
415 return 0;
417 machine_device_initcall(pasemi, pasemi_publish_devices);
421 * Called very early, MMU is off, device-tree isn't unflattened
423 static int __init pas_probe(void)
425 if (!of_machine_is_compatible("PA6T-1682M") &&
426 !of_machine_is_compatible("pasemi,pwrficient"))
427 return 0;
429 #ifdef CONFIG_PPC_PASEMI_NEMO
431 * Check for the Nemo motherboard here, if we are running on one
432 * change the machine definition to fit
434 if (of_machine_is_compatible("pasemi,nemo")) {
435 pm_power_off = pas_shutdown;
436 ppc_md.name = "A-EON Amigaone X1000";
438 #endif
440 iommu_init_early_pasemi();
442 return 1;
445 define_machine(pasemi) {
446 .name = "PA Semi PWRficient",
447 .probe = pas_probe,
448 .setup_arch = pas_setup_arch,
449 .init_IRQ = pas_init_IRQ,
450 .get_irq = mpic_get_irq,
451 .restart = pas_restart,
452 .get_boot_time = pas_get_boot_time,
453 .calibrate_decr = generic_calibrate_decr,
454 .progress = pas_progress,
455 .machine_check_exception = pas_machine_check_handler,