WIP FPC-III support

[linux/fpc-iii.git] / arch / powerpc / platforms / pseries / eeh_pseries.c

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * The file intends to implement the platform dependent EEH operations on pseries.
 * Actually, the pseries platform is built based on RTAS heavily. That means the
 * pseries platform dependent EEH operations will be built on RTAS calls. The functions
 * are derived from arch/powerpc/platforms/pseries/eeh.c and necessary cleanup has
 * been done.
 *
 * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2011.
 * Copyright IBM Corporation 2001, 2005, 2006
 * Copyright Dave Engebretsen & Todd Inglett 2001
 * Copyright Linas Vepstas 2005, 2006
 */

#include <linux/atomic.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/of.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/rbtree.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/crash_dump.h>

#include <asm/eeh.h>
#include <asm/eeh_event.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
#include <asm/rtas.h>

/* RTAS tokens */
static int ibm_set_eeh_option;
static int ibm_set_slot_reset;
static int ibm_read_slot_reset_state;
static int ibm_read_slot_reset_state2;
static int ibm_slot_error_detail;
static int ibm_get_config_addr_info;
static int ibm_get_config_addr_info2;
static int ibm_configure_pe;

void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
{
        struct pci_dn *pdn = pci_get_pdn(pdev);

        if (eeh_has_flag(EEH_FORCE_DISABLED))
                return;

        dev_dbg(&pdev->dev, "EEH: Setting up device\n");
#ifdef CONFIG_PCI_IOV
        if (pdev->is_virtfn) {
                pdn->device_id  =  pdev->device;
                pdn->vendor_id  =  pdev->vendor;
                pdn->class_code =  pdev->class;
                /*
                 * Last allow unfreeze return code used for retrieval
                 * by user space in eeh-sysfs to show the last command
                 * completion from platform.
                 */
                pdn->last_allow_rc =  0;
        }
#endif
        pseries_eeh_init_edev(pdn);
#ifdef CONFIG_PCI_IOV
        if (pdev->is_virtfn) {
                /*
                 * FIXME: This really should be handled by choosing the right
                 *        parent PE in in pseries_eeh_init_edev().
                 */
                struct eeh_pe *physfn_pe = pci_dev_to_eeh_dev(pdev->physfn)->pe;
                struct eeh_dev *edev = pdn_to_eeh_dev(pdn);

                edev->pe_config_addr =  (pdn->busno << 16) | (pdn->devfn << 8);
                eeh_pe_tree_remove(edev); /* Remove as it is adding to bus pe */
                eeh_pe_tree_insert(edev, physfn_pe);   /* Add as VF PE type */
        }
#endif
        eeh_probe_device(pdev);
}


/**
 * pseries_eeh_get_pe_config_addr - Find the pe_config_addr for a device
 * @pdn: pci_dn of the input device
 *
 * The EEH RTAS calls use a tuple consisting of: (buid_hi, buid_lo,
 * pe_config_addr) as a handle to a given PE. This function finds the
 * pe_config_addr based on the device's config addr.
 *
 * Keep in mind that the pe_config_addr *might* be numerically identical to the
 * device's config addr, but the two are conceptually distinct.
 *
 * Returns the pe_config_addr, or a negative error code.
 */
static int pseries_eeh_get_pe_config_addr(struct pci_dn *pdn)
{
        int config_addr = rtas_config_addr(pdn->busno, pdn->devfn, 0);
        struct pci_controller *phb = pdn->phb;
        int ret, rets[3];

        if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
                /*
                 * First of all, use function 1 to determine if this device is
                 * part of a PE or not. ret[0] being zero indicates it's not.
                 */
                ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
                                config_addr, BUID_HI(phb->buid),
                                BUID_LO(phb->buid), 1);
                if (ret || (rets[0] == 0))
                        return -ENOENT;

                /* Retrieve the associated PE config address with function 0 */
                ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
                                config_addr, BUID_HI(phb->buid),
                                BUID_LO(phb->buid), 0);
                if (ret) {
                        pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
                                __func__, phb->global_number, config_addr);
                        return -ENXIO;
                }

                return rets[0];
        }

        if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
                ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
                                config_addr, BUID_HI(phb->buid),
                                BUID_LO(phb->buid), 0);
                if (ret) {
                        pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
                                __func__, phb->global_number, config_addr);
                        return -ENXIO;
                }

                return rets[0];
        }

        /*
         * PAPR does describe a process for finding the pe_config_addr that was
         * used before the ibm,get-config-addr-info calls were added. However,
         * I haven't found *any* systems that don't have that RTAS call
         * implemented. If you happen to find one that needs the old DT based
         * process, patches are welcome!
         */
        return -ENOENT;
}

/**
 * pseries_eeh_phb_reset - Reset the specified PHB
 * @phb: PCI controller
 * @config_adddr: the associated config address
 * @option: reset option
 *
 * Reset the specified PHB/PE
 */
static int pseries_eeh_phb_reset(struct pci_controller *phb, int config_addr, int option)
{
        int ret;

        /* Reset PE through RTAS call */
        ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
                        config_addr, BUID_HI(phb->buid),
                        BUID_LO(phb->buid), option);

        /* If fundamental-reset not supported, try hot-reset */
        if (option == EEH_RESET_FUNDAMENTAL && ret == -8) {
                option = EEH_RESET_HOT;
                ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
                                config_addr, BUID_HI(phb->buid),
                                BUID_LO(phb->buid), option);
        }

        /* We need reset hold or settlement delay */
        if (option == EEH_RESET_FUNDAMENTAL || option == EEH_RESET_HOT)
                msleep(EEH_PE_RST_HOLD_TIME);
        else
                msleep(EEH_PE_RST_SETTLE_TIME);

        return ret;
}

/**
 * pseries_eeh_phb_configure_bridge - Configure PCI bridges in the indicated PE
 * @phb: PCI controller
 * @config_adddr: the associated config address
 *
 * The function will be called to reconfigure the bridges included
 * in the specified PE so that the mulfunctional PE would be recovered
 * again.
 */
static int pseries_eeh_phb_configure_bridge(struct pci_controller *phb, int config_addr)
{
        int ret;
        /* Waiting 0.2s maximum before skipping configuration */
        int max_wait = 200;

        while (max_wait > 0) {
                ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
                                config_addr, BUID_HI(phb->buid),
                                BUID_LO(phb->buid));

                if (!ret)
                        return ret;
                if (ret < 0)
                        break;

                /*
                 * If RTAS returns a delay value that's above 100ms, cut it
                 * down to 100ms in case firmware made a mistake.  For more
                 * on how these delay values work see rtas_busy_delay_time
                 */
                if (ret > RTAS_EXTENDED_DELAY_MIN+2 &&
                    ret <= RTAS_EXTENDED_DELAY_MAX)
                        ret = RTAS_EXTENDED_DELAY_MIN+2;

                max_wait -= rtas_busy_delay_time(ret);

                if (max_wait < 0)
                        break;

                rtas_busy_delay(ret);
        }

        pr_warn("%s: Unable to configure bridge PHB#%x-PE#%x (%d)\n",
                __func__, phb->global_number, config_addr, ret);
        /* PAPR defines -3 as "Parameter Error" for this function: */
        if (ret == -3)
                return -EINVAL;
        else
                return -EIO;
}

/*
 * Buffer for reporting slot-error-detail rtas calls. Its here
 * in BSS, and not dynamically alloced, so that it ends up in
 * RMO where RTAS can access it.
 */
static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
static DEFINE_SPINLOCK(slot_errbuf_lock);
static int eeh_error_buf_size;

static int pseries_eeh_cap_start(struct pci_dn *pdn)
{
        u32 status;

        if (!pdn)
                return 0;

        rtas_read_config(pdn, PCI_STATUS, 2, &status);
        if (!(status & PCI_STATUS_CAP_LIST))
                return 0;

        return PCI_CAPABILITY_LIST;
}


static int pseries_eeh_find_cap(struct pci_dn *pdn, int cap)
{
        int pos = pseries_eeh_cap_start(pdn);
        int cnt = 48;   /* Maximal number of capabilities */
        u32 id;

        if (!pos)
                return 0;

        while (cnt--) {
                rtas_read_config(pdn, pos, 1, &pos);
                if (pos < 0x40)
                        break;
                pos &= ~3;
                rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
                if (id == 0xff)
                        break;
                if (id == cap)
                        return pos;
                pos += PCI_CAP_LIST_NEXT;
        }

        return 0;
}

static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
{
        struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
        u32 header;
        int pos = 256;
        int ttl = (4096 - 256) / 8;

        if (!edev || !edev->pcie_cap)
                return 0;
        if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
                return 0;
        else if (!header)
                return 0;

        while (ttl-- > 0) {
                if (PCI_EXT_CAP_ID(header) == cap && pos)
                        return pos;

                pos = PCI_EXT_CAP_NEXT(header);
                if (pos < 256)
                        break;

                if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
                        break;
        }

        return 0;
}

/**
 * pseries_eeh_pe_get_parent - Retrieve the parent PE
 * @edev: EEH device
 *
 * The whole PEs existing in the system are organized as hierarchy
 * tree. The function is used to retrieve the parent PE according
 * to the parent EEH device.
 */
static struct eeh_pe *pseries_eeh_pe_get_parent(struct eeh_dev *edev)
{
        struct eeh_dev *parent;
        struct pci_dn *pdn = eeh_dev_to_pdn(edev);

        /*
         * It might have the case for the indirect parent
         * EEH device already having associated PE, but
         * the direct parent EEH device doesn't have yet.
         */
        if (edev->physfn)
                pdn = pci_get_pdn(edev->physfn);
        else
                pdn = pdn ? pdn->parent : NULL;
        while (pdn) {
                /* We're poking out of PCI territory */
                parent = pdn_to_eeh_dev(pdn);
                if (!parent)
                        return NULL;

                if (parent->pe)
                        return parent->pe;

                pdn = pdn->parent;
        }

        return NULL;
}

/**
 * pseries_eeh_init_edev - initialise the eeh_dev and eeh_pe for a pci_dn
 *
 * @pdn: PCI device node
 *
 * When we discover a new PCI device via the device-tree we create a
 * corresponding pci_dn and we allocate, but don't initialise, an eeh_dev.
 * This function takes care of the initialisation and inserts the eeh_dev
 * into the correct eeh_pe. If no eeh_pe exists we'll allocate one.
 */
void pseries_eeh_init_edev(struct pci_dn *pdn)
{
        struct eeh_pe pe, *parent;
        struct eeh_dev *edev;
        u32 pcie_flags;
        int ret;

        if (WARN_ON_ONCE(!eeh_has_flag(EEH_PROBE_MODE_DEVTREE)))
                return;

        /*
         * Find the eeh_dev for this pdn. The storage for the eeh_dev was
         * allocated at the same time as the pci_dn.
         *
         * XXX: We should probably re-visit that.
         */
        edev = pdn_to_eeh_dev(pdn);
        if (!edev)
                return;

        /*
         * If ->pe is set then we've already probed this device. We hit
         * this path when a pci_dev is removed and rescanned while recovering
         * a PE (i.e. for devices where the driver doesn't support error
         * recovery).
         */
        if (edev->pe)
                return;

        /* Check class/vendor/device IDs */
        if (!pdn->vendor_id || !pdn->device_id || !pdn->class_code)
                return;

        /* Skip for PCI-ISA bridge */
        if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
                return;

        eeh_edev_dbg(edev, "Probing device\n");

        /*
         * Update class code and mode of eeh device. We need
         * correctly reflects that current device is root port
         * or PCIe switch downstream port.
         */
        edev->pcix_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
        edev->pcie_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
        edev->aer_cap = pseries_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
        edev->mode &= 0xFFFFFF00;
        if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
                edev->mode |= EEH_DEV_BRIDGE;
                if (edev->pcie_cap) {
                        rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
                                         2, &pcie_flags);
                        pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
                        if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
                                edev->mode |= EEH_DEV_ROOT_PORT;
                        else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
                                edev->mode |= EEH_DEV_DS_PORT;
                }
        }

        /* first up, find the pe_config_addr for the PE containing the device */
        ret = pseries_eeh_get_pe_config_addr(pdn);
        if (ret < 0) {
                eeh_edev_dbg(edev, "Unable to find pe_config_addr\n");
                goto err;
        }

        /* Try enable EEH on the fake PE */
        memset(&pe, 0, sizeof(struct eeh_pe));
        pe.phb = pdn->phb;
        pe.addr = ret;

        eeh_edev_dbg(edev, "Enabling EEH on device\n");
        ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
        if (ret) {
                eeh_edev_dbg(edev, "EEH failed to enable on device (code %d)\n", ret);
                goto err;
        }

        edev->pe_config_addr = pe.addr;

        eeh_add_flag(EEH_ENABLED);

        parent = pseries_eeh_pe_get_parent(edev);
        eeh_pe_tree_insert(edev, parent);
        eeh_save_bars(edev);
        eeh_edev_dbg(edev, "EEH enabled for device");

        return;

err:
        eeh_edev_dbg(edev, "EEH is unsupported on device (code = %d)\n", ret);
}

static struct eeh_dev *pseries_eeh_probe(struct pci_dev *pdev)
{
        struct eeh_dev *edev;
        struct pci_dn *pdn;

        pdn = pci_get_pdn_by_devfn(pdev->bus, pdev->devfn);
        if (!pdn)
                return NULL;

        /*
         * If the system supports EEH on this device then the eeh_dev was
         * configured and inserted into a PE in pseries_eeh_init_edev()
         */
        edev = pdn_to_eeh_dev(pdn);
        if (!edev || !edev->pe)
                return NULL;

        return edev;
}

/**
 * pseries_eeh_init_edev_recursive - Enable EEH for the indicated device
 * @pdn: PCI device node
 *
 * This routine must be used to perform EEH initialization for the
 * indicated PCI device that was added after system boot (e.g.
 * hotplug, dlpar).
 */
void pseries_eeh_init_edev_recursive(struct pci_dn *pdn)
{
        struct pci_dn *n;

        if (!pdn)
                return;

        list_for_each_entry(n, &pdn->child_list, list)
                pseries_eeh_init_edev_recursive(n);

        pseries_eeh_init_edev(pdn);
}
EXPORT_SYMBOL_GPL(pseries_eeh_init_edev_recursive);

/**
 * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
 * @pe: EEH PE
 * @option: operation to be issued
 *
 * The function is used to control the EEH functionality globally.
 * Currently, following options are support according to PAPR:
 * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
 */
static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
{
        int ret = 0;

        /*
         * When we're enabling or disabling EEH functioality on
         * the particular PE, the PE config address is possibly
         * unavailable. Therefore, we have to figure it out from
         * the FDT node.
         */
        switch (option) {
        case EEH_OPT_DISABLE:
        case EEH_OPT_ENABLE:
        case EEH_OPT_THAW_MMIO:
        case EEH_OPT_THAW_DMA:
                break;
        case EEH_OPT_FREEZE_PE:
                /* Not support */
                return 0;
        default:
                pr_err("%s: Invalid option %d\n", __func__, option);
                return -EINVAL;
        }

        ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
                        pe->addr, BUID_HI(pe->phb->buid),
                        BUID_LO(pe->phb->buid), option);

        return ret;
}

/**
 * pseries_eeh_get_state - Retrieve PE state
 * @pe: EEH PE
 * @delay: suggested time to wait if state is unavailable
 *
 * Retrieve the state of the specified PE. On RTAS compliant
 * pseries platform, there already has one dedicated RTAS function
 * for the purpose. It's notable that the associated PE config address
 * might be ready when calling the function. Therefore, endeavour to
 * use the PE config address if possible. Further more, there're 2
 * RTAS calls for the purpose, we need to try the new one and back
 * to the old one if the new one couldn't work properly.
 */
static int pseries_eeh_get_state(struct eeh_pe *pe, int *delay)
{
        int ret;
        int rets[4];
        int result;

        if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
                ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets,
                                pe->addr, BUID_HI(pe->phb->buid),
                                BUID_LO(pe->phb->buid));
        } else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) {
                /* Fake PE unavailable info */
                rets[2] = 0;
                ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets,
                                pe->addr, BUID_HI(pe->phb->buid),
                                BUID_LO(pe->phb->buid));
        } else {
                return EEH_STATE_NOT_SUPPORT;
        }

        if (ret)
                return ret;

        /* Parse the result out */
        if (!rets[1])
                return EEH_STATE_NOT_SUPPORT;

        switch(rets[0]) {
        case 0:
                result = EEH_STATE_MMIO_ACTIVE |
                         EEH_STATE_DMA_ACTIVE;
                break;
        case 1:
                result = EEH_STATE_RESET_ACTIVE |
                         EEH_STATE_MMIO_ACTIVE  |
                         EEH_STATE_DMA_ACTIVE;
                break;
        case 2:
                result = 0;
                break;
        case 4:
                result = EEH_STATE_MMIO_ENABLED;
                break;
        case 5:
                if (rets[2]) {
                        if (delay)
                                *delay = rets[2];
                        result = EEH_STATE_UNAVAILABLE;
                } else {
                        result = EEH_STATE_NOT_SUPPORT;
                }
                break;
        default:
                result = EEH_STATE_NOT_SUPPORT;
        }

        return result;
}

/**
 * pseries_eeh_reset - Reset the specified PE
 * @pe: EEH PE
 * @option: reset option
 *
 * Reset the specified PE
 */
static int pseries_eeh_reset(struct eeh_pe *pe, int option)
{
        return pseries_eeh_phb_reset(pe->phb, pe->addr, option);
}

/**
 * pseries_eeh_get_log - Retrieve error log
 * @pe: EEH PE
 * @severity: temporary or permanent error log
 * @drv_log: driver log to be combined with retrieved error log
 * @len: length of driver log
 *
 * Retrieve the temporary or permanent error from the PE.
 * Actually, the error will be retrieved through the dedicated
 * RTAS call.
 */
static int pseries_eeh_get_log(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len)
{
        unsigned long flags;
        int ret;

        spin_lock_irqsave(&slot_errbuf_lock, flags);
        memset(slot_errbuf, 0, eeh_error_buf_size);

        ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, pe->addr,
                        BUID_HI(pe->phb->buid), BUID_LO(pe->phb->buid),
                        virt_to_phys(drv_log), len,
                        virt_to_phys(slot_errbuf), eeh_error_buf_size,
                        severity);
        if (!ret)
                log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
        spin_unlock_irqrestore(&slot_errbuf_lock, flags);

        return ret;
}

/**
 * pseries_eeh_configure_bridge - Configure PCI bridges in the indicated PE
 * @pe: EEH PE
 *
 */
static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
{
        return pseries_eeh_phb_configure_bridge(pe->phb, pe->addr);
}

/**
 * pseries_eeh_read_config - Read PCI config space
 * @edev: EEH device handle
 * @where: PCI config space offset
 * @size: size to read
 * @val: return value
 *
 * Read config space from the speicifed device
 */
static int pseries_eeh_read_config(struct eeh_dev *edev, int where, int size, u32 *val)
{
        struct pci_dn *pdn = eeh_dev_to_pdn(edev);

        return rtas_read_config(pdn, where, size, val);
}

/**
 * pseries_eeh_write_config - Write PCI config space
 * @edev: EEH device handle
 * @where: PCI config space offset
 * @size: size to write
 * @val: value to be written
 *
 * Write config space to the specified device
 */
static int pseries_eeh_write_config(struct eeh_dev *edev, int where, int size, u32 val)
{
        struct pci_dn *pdn = eeh_dev_to_pdn(edev);

        return rtas_write_config(pdn, where, size, val);
}

#ifdef CONFIG_PCI_IOV
int pseries_send_allow_unfreeze(struct pci_dn *pdn,
                                u16 *vf_pe_array, int cur_vfs)
{
        int rc;
        int ibm_allow_unfreeze = rtas_token("ibm,open-sriov-allow-unfreeze");
        unsigned long buid, addr;

        addr = rtas_config_addr(pdn->busno, pdn->devfn, 0);
        buid = pdn->phb->buid;
        spin_lock(&rtas_data_buf_lock);
        memcpy(rtas_data_buf, vf_pe_array, RTAS_DATA_BUF_SIZE);
        rc = rtas_call(ibm_allow_unfreeze, 5, 1, NULL,
                       addr,
                       BUID_HI(buid),
                       BUID_LO(buid),
                       rtas_data_buf, cur_vfs * sizeof(u16));
        spin_unlock(&rtas_data_buf_lock);
        if (rc)
                pr_warn("%s: Failed to allow unfreeze for PHB#%x-PE#%lx, rc=%x\n",
                        __func__,
                        pdn->phb->global_number, addr, rc);
        return rc;
}

static int pseries_call_allow_unfreeze(struct eeh_dev *edev)
{
        int cur_vfs = 0, rc = 0, vf_index, bus, devfn, vf_pe_num;
        struct pci_dn *pdn, *tmp, *parent, *physfn_pdn;
        u16 *vf_pe_array;

        vf_pe_array = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
        if (!vf_pe_array)
                return -ENOMEM;
        if (pci_num_vf(edev->physfn ? edev->physfn : edev->pdev)) {
                if (edev->pdev->is_physfn) {
                        cur_vfs = pci_num_vf(edev->pdev);
                        pdn = eeh_dev_to_pdn(edev);
                        parent = pdn->parent;
                        for (vf_index = 0; vf_index < cur_vfs; vf_index++)
                                vf_pe_array[vf_index] =
                                        cpu_to_be16(pdn->pe_num_map[vf_index]);
                        rc = pseries_send_allow_unfreeze(pdn, vf_pe_array,
                                                         cur_vfs);
                        pdn->last_allow_rc = rc;
                        for (vf_index = 0; vf_index < cur_vfs; vf_index++) {
                                list_for_each_entry_safe(pdn, tmp,
                                                         &parent->child_list,
                                                         list) {
                                        bus = pci_iov_virtfn_bus(edev->pdev,
                                                                 vf_index);
                                        devfn = pci_iov_virtfn_devfn(edev->pdev,
                                                                     vf_index);
                                        if (pdn->busno != bus ||
                                            pdn->devfn != devfn)
                                                continue;
                                        pdn->last_allow_rc = rc;
                                }
                        }
                } else {
                        pdn = pci_get_pdn(edev->pdev);
                        physfn_pdn = pci_get_pdn(edev->physfn);

                        vf_pe_num = physfn_pdn->pe_num_map[edev->vf_index];
                        vf_pe_array[0] = cpu_to_be16(vf_pe_num);
                        rc = pseries_send_allow_unfreeze(physfn_pdn,
                                                         vf_pe_array, 1);
                        pdn->last_allow_rc = rc;
                }
        }

        kfree(vf_pe_array);
        return rc;
}

static int pseries_notify_resume(struct eeh_dev *edev)
{
        if (!edev)
                return -EEXIST;

        if (rtas_token("ibm,open-sriov-allow-unfreeze") == RTAS_UNKNOWN_SERVICE)
                return -EINVAL;

        if (edev->pdev->is_physfn || edev->pdev->is_virtfn)
                return pseries_call_allow_unfreeze(edev);

        return 0;
}
#endif

static struct eeh_ops pseries_eeh_ops = {
        .name                   = "pseries",
        .probe                  = pseries_eeh_probe,
        .set_option             = pseries_eeh_set_option,
        .get_state              = pseries_eeh_get_state,
        .reset                  = pseries_eeh_reset,
        .get_log                = pseries_eeh_get_log,
        .configure_bridge       = pseries_eeh_configure_bridge,
        .err_inject             = NULL,
        .read_config            = pseries_eeh_read_config,
        .write_config           = pseries_eeh_write_config,
        .next_error             = NULL,
        .restore_config         = NULL, /* NB: configure_bridge() does this */
#ifdef CONFIG_PCI_IOV
        .notify_resume          = pseries_notify_resume
#endif
};

/**
 * eeh_pseries_init - Register platform dependent EEH operations
 *
 * EEH initialization on pseries platform. This function should be
 * called before any EEH related functions.
 */
static int __init eeh_pseries_init(void)
{
        struct pci_controller *phb;
        struct pci_dn *pdn;
        int ret, config_addr;

        /* figure out EEH RTAS function call tokens */
        ibm_set_eeh_option              = rtas_token("ibm,set-eeh-option");
        ibm_set_slot_reset              = rtas_token("ibm,set-slot-reset");
        ibm_read_slot_reset_state2      = rtas_token("ibm,read-slot-reset-state2");
        ibm_read_slot_reset_state       = rtas_token("ibm,read-slot-reset-state");
        ibm_slot_error_detail           = rtas_token("ibm,slot-error-detail");
        ibm_get_config_addr_info2       = rtas_token("ibm,get-config-addr-info2");
        ibm_get_config_addr_info        = rtas_token("ibm,get-config-addr-info");
        ibm_configure_pe                = rtas_token("ibm,configure-pe");

        /*
         * ibm,configure-pe and ibm,configure-bridge have the same semantics,
         * however ibm,configure-pe can be faster.  If we can't find
         * ibm,configure-pe then fall back to using ibm,configure-bridge.
         */
        if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE)
                ibm_configure_pe        = rtas_token("ibm,configure-bridge");

        /*
         * Necessary sanity check. We needn't check "get-config-addr-info"
         * and its variant since the old firmware probably support address
         * of domain/bus/slot/function for EEH RTAS operations.
         */
        if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE          ||
            ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE          ||
            (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
             ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) ||
            ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE       ||
            ibm_configure_pe == RTAS_UNKNOWN_SERVICE) {
                pr_info("EEH functionality not supported\n");
                return -EINVAL;
        }

        /* Initialize error log lock and size */
        spin_lock_init(&slot_errbuf_lock);
        eeh_error_buf_size = rtas_token("rtas-error-log-max");
        if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
                pr_info("%s: unknown EEH error log size\n",
                        __func__);
                eeh_error_buf_size = 1024;
        } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
                pr_info("%s: EEH error log size %d exceeds the maximal %d\n",
                        __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
                eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
        }

        /* Set EEH probe mode */
        eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG);

        /* Set EEH machine dependent code */
        ppc_md.pcibios_bus_add_device = pseries_pcibios_bus_add_device;

        if (is_kdump_kernel() || reset_devices) {
                pr_info("Issue PHB reset ...\n");
                list_for_each_entry(phb, &hose_list, list_node) {
                        pdn = list_first_entry(&PCI_DN(phb->dn)->child_list, struct pci_dn, list);
                        config_addr = pseries_eeh_get_pe_config_addr(pdn);

                        /* invalid PE config addr */
                        if (config_addr < 0)
                                continue;

                        pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_FUNDAMENTAL);
                        pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_DEACTIVATE);
                        pseries_eeh_phb_configure_bridge(phb, config_addr);
                }
        }

        ret = eeh_init(&pseries_eeh_ops);
        if (!ret)
                pr_info("EEH: pSeries platform initialized\n");
        else
                pr_info("EEH: pSeries platform initialization failure (%d)\n",
                        ret);
        return ret;
}
machine_arch_initcall(pseries, eeh_pseries_init);