WIP FPC-III support
[linux/fpc-iii.git] / arch / sh / boards / mach-se / 7206 / irq.c
blob2b15370829aef3cff604e4a8dce9e119948b5f9b
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * linux/arch/sh/boards/se/7206/irq.c
5 * Copyright (C) 2005,2006 Yoshinori Sato
7 * Hitachi SolutionEngine Support.
9 */
10 #include <linux/init.h>
11 #include <linux/irq.h>
12 #include <linux/io.h>
13 #include <linux/interrupt.h>
14 #include <mach-se/mach/se7206.h>
16 #define INTSTS0 0x31800000
17 #define INTSTS1 0x31800002
18 #define INTMSK0 0x31800004
19 #define INTMSK1 0x31800006
20 #define INTSEL 0x31800008
22 #define IRQ0_IRQ 64
23 #define IRQ1_IRQ 65
24 #define IRQ3_IRQ 67
26 #define INTC_IPR01 0xfffe0818
27 #define INTC_ICR1 0xfffe0802
29 static void disable_se7206_irq(struct irq_data *data)
31 unsigned int irq = data->irq;
32 unsigned short val;
33 unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
34 unsigned short msk0,msk1;
36 /* Set the priority in IPR to 0 */
37 val = __raw_readw(INTC_IPR01);
38 val &= mask;
39 __raw_writew(val, INTC_IPR01);
40 /* FPGA mask set */
41 msk0 = __raw_readw(INTMSK0);
42 msk1 = __raw_readw(INTMSK1);
44 switch (irq) {
45 case IRQ0_IRQ:
46 msk0 |= 0x0010;
47 break;
48 case IRQ1_IRQ:
49 msk0 |= 0x000f;
50 break;
51 case IRQ3_IRQ:
52 msk0 |= 0x0f00;
53 msk1 |= 0x00ff;
54 break;
56 __raw_writew(msk0, INTMSK0);
57 __raw_writew(msk1, INTMSK1);
60 static void enable_se7206_irq(struct irq_data *data)
62 unsigned int irq = data->irq;
63 unsigned short val;
64 unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
65 unsigned short msk0,msk1;
67 /* Set priority in IPR back to original value */
68 val = __raw_readw(INTC_IPR01);
69 val |= value;
70 __raw_writew(val, INTC_IPR01);
72 /* FPGA mask reset */
73 msk0 = __raw_readw(INTMSK0);
74 msk1 = __raw_readw(INTMSK1);
76 switch (irq) {
77 case IRQ0_IRQ:
78 msk0 &= ~0x0010;
79 break;
80 case IRQ1_IRQ:
81 msk0 &= ~0x000f;
82 break;
83 case IRQ3_IRQ:
84 msk0 &= ~0x0f00;
85 msk1 &= ~0x00ff;
86 break;
88 __raw_writew(msk0, INTMSK0);
89 __raw_writew(msk1, INTMSK1);
92 static void eoi_se7206_irq(struct irq_data *data)
94 unsigned short sts0,sts1;
95 unsigned int irq = data->irq;
97 if (!irqd_irq_disabled(data) && !irqd_irq_inprogress(data))
98 enable_se7206_irq(data);
99 /* FPGA isr clear */
100 sts0 = __raw_readw(INTSTS0);
101 sts1 = __raw_readw(INTSTS1);
103 switch (irq) {
104 case IRQ0_IRQ:
105 sts0 &= ~0x0010;
106 break;
107 case IRQ1_IRQ:
108 sts0 &= ~0x000f;
109 break;
110 case IRQ3_IRQ:
111 sts0 &= ~0x0f00;
112 sts1 &= ~0x00ff;
113 break;
115 __raw_writew(sts0, INTSTS0);
116 __raw_writew(sts1, INTSTS1);
119 static struct irq_chip se7206_irq_chip __read_mostly = {
120 .name = "SE7206-FPGA",
121 .irq_mask = disable_se7206_irq,
122 .irq_unmask = enable_se7206_irq,
123 .irq_eoi = eoi_se7206_irq,
126 static void make_se7206_irq(unsigned int irq)
128 disable_irq_nosync(irq);
129 irq_set_chip_and_handler_name(irq, &se7206_irq_chip,
130 handle_level_irq, "level");
131 disable_se7206_irq(irq_get_irq_data(irq));
135 * Initialize IRQ setting
137 void __init init_se7206_IRQ(void)
139 make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
140 make_se7206_irq(IRQ1_IRQ); /* ATA */
141 make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
143 __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
145 /* FPGA System register setup*/
146 __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
147 __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
149 /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
150 __raw_writew(0x0001,INTSEL);