WIP FPC-III support
[linux/fpc-iii.git] / drivers / clocksource / mxs_timer.c
blobbc96a4cbf26c64c82bb7c1bd1c8b1a1f4fe212fb
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright (C) 2000-2001 Deep Blue Solutions
4 // Copyright (C) 2002 Shane Nay (shane@minirl.com)
5 // Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
6 // Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
7 // Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
9 #include <linux/err.h>
10 #include <linux/interrupt.h>
11 #include <linux/irq.h>
12 #include <linux/clockchips.h>
13 #include <linux/clk.h>
14 #include <linux/of.h>
15 #include <linux/of_address.h>
16 #include <linux/of_irq.h>
17 #include <linux/stmp_device.h>
18 #include <linux/sched_clock.h>
21 * There are 2 versions of the timrot on Freescale MXS-based SoCs.
22 * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
23 * extends the counter to 32 bits.
25 * The implementation uses two timers, one for clock_event and
26 * another for clocksource. MX28 uses timrot 0 and 1, while MX23
27 * uses 0 and 2.
30 #define MX23_TIMROT_VERSION_OFFSET 0x0a0
31 #define MX28_TIMROT_VERSION_OFFSET 0x120
32 #define BP_TIMROT_MAJOR_VERSION 24
33 #define BV_TIMROT_VERSION_1 0x01
34 #define BV_TIMROT_VERSION_2 0x02
35 #define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1)
38 * There are 4 registers for each timrotv2 instance, and 2 registers
39 * for each timrotv1. So address step 0x40 in macros below strides
40 * one instance of timrotv2 while two instances of timrotv1.
42 * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
43 * on MX28 while timrot2 on MX23.
45 /* common between v1 and v2 */
46 #define HW_TIMROT_ROTCTRL 0x00
47 #define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40)
48 /* v1 only */
49 #define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40)
50 /* v2 only */
51 #define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40)
52 #define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40)
54 #define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6)
55 #define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7)
56 #define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
57 #define BM_TIMROT_TIMCTRLn_IRQ (1 << 15)
58 #define BP_TIMROT_TIMCTRLn_SELECT 0
59 #define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8
60 #define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb
61 #define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf
63 static struct clock_event_device mxs_clockevent_device;
65 static void __iomem *mxs_timrot_base;
66 static u32 timrot_major_version;
68 static inline void timrot_irq_disable(void)
70 __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
71 HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
74 static inline void timrot_irq_enable(void)
76 __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
77 HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
80 static void timrot_irq_acknowledge(void)
82 __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
83 HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
86 static u64 timrotv1_get_cycles(struct clocksource *cs)
88 return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
89 & 0xffff0000) >> 16);
92 static int timrotv1_set_next_event(unsigned long evt,
93 struct clock_event_device *dev)
95 /* timrot decrements the count */
96 __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
98 return 0;
101 static int timrotv2_set_next_event(unsigned long evt,
102 struct clock_event_device *dev)
104 /* timrot decrements the count */
105 __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
107 return 0;
110 static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
112 struct clock_event_device *evt = dev_id;
114 timrot_irq_acknowledge();
115 evt->event_handler(evt);
117 return IRQ_HANDLED;
120 static void mxs_irq_clear(char *state)
122 /* Disable interrupt in timer module */
123 timrot_irq_disable();
125 /* Set event time into the furthest future */
126 if (timrot_is_v1())
127 __raw_writel(0xffff, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
128 else
129 __raw_writel(0xffffffff,
130 mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
132 /* Clear pending interrupt */
133 timrot_irq_acknowledge();
135 #ifdef DEBUG
136 pr_info("%s: changing mode to %s\n", __func__, state)
137 #endif /* DEBUG */
140 static int mxs_shutdown(struct clock_event_device *evt)
142 mxs_irq_clear("shutdown");
144 return 0;
147 static int mxs_set_oneshot(struct clock_event_device *evt)
149 if (clockevent_state_oneshot(evt))
150 mxs_irq_clear("oneshot");
151 timrot_irq_enable();
152 return 0;
155 static struct clock_event_device mxs_clockevent_device = {
156 .name = "mxs_timrot",
157 .features = CLOCK_EVT_FEAT_ONESHOT,
158 .set_state_shutdown = mxs_shutdown,
159 .set_state_oneshot = mxs_set_oneshot,
160 .tick_resume = mxs_shutdown,
161 .set_next_event = timrotv2_set_next_event,
162 .rating = 200,
165 static int __init mxs_clockevent_init(struct clk *timer_clk)
167 if (timrot_is_v1())
168 mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
169 mxs_clockevent_device.cpumask = cpumask_of(0);
170 clockevents_config_and_register(&mxs_clockevent_device,
171 clk_get_rate(timer_clk),
172 timrot_is_v1() ? 0xf : 0x2,
173 timrot_is_v1() ? 0xfffe : 0xfffffffe);
175 return 0;
178 static struct clocksource clocksource_mxs = {
179 .name = "mxs_timer",
180 .rating = 200,
181 .read = timrotv1_get_cycles,
182 .mask = CLOCKSOURCE_MASK(16),
183 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
186 static u64 notrace mxs_read_sched_clock_v2(void)
188 return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
191 static int __init mxs_clocksource_init(struct clk *timer_clk)
193 unsigned int c = clk_get_rate(timer_clk);
195 if (timrot_is_v1())
196 clocksource_register_hz(&clocksource_mxs, c);
197 else {
198 clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
199 "mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
200 sched_clock_register(mxs_read_sched_clock_v2, 32, c);
203 return 0;
206 static int __init mxs_timer_init(struct device_node *np)
208 struct clk *timer_clk;
209 int irq, ret;
211 mxs_timrot_base = of_iomap(np, 0);
212 WARN_ON(!mxs_timrot_base);
214 timer_clk = of_clk_get(np, 0);
215 if (IS_ERR(timer_clk)) {
216 pr_err("%s: failed to get clk\n", __func__);
217 return PTR_ERR(timer_clk);
220 ret = clk_prepare_enable(timer_clk);
221 if (ret)
222 return ret;
225 * Initialize timers to a known state
227 stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
229 /* get timrot version */
230 timrot_major_version = __raw_readl(mxs_timrot_base +
231 (of_device_is_compatible(np, "fsl,imx23-timrot") ?
232 MX23_TIMROT_VERSION_OFFSET :
233 MX28_TIMROT_VERSION_OFFSET));
234 timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
236 /* one for clock_event */
237 __raw_writel((timrot_is_v1() ?
238 BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
239 BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
240 BM_TIMROT_TIMCTRLn_UPDATE |
241 BM_TIMROT_TIMCTRLn_IRQ_EN,
242 mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
244 /* another for clocksource */
245 __raw_writel((timrot_is_v1() ?
246 BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
247 BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
248 BM_TIMROT_TIMCTRLn_RELOAD,
249 mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
251 /* set clocksource timer fixed count to the maximum */
252 if (timrot_is_v1())
253 __raw_writel(0xffff,
254 mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
255 else
256 __raw_writel(0xffffffff,
257 mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
259 /* init and register the timer to the framework */
260 ret = mxs_clocksource_init(timer_clk);
261 if (ret)
262 return ret;
264 ret = mxs_clockevent_init(timer_clk);
265 if (ret)
266 return ret;
268 /* Make irqs happen */
269 irq = irq_of_parse_and_map(np, 0);
270 if (irq <= 0)
271 return -EINVAL;
273 return request_irq(irq, mxs_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
274 "MXS Timer Tick", &mxs_clockevent_device);
276 TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);