WIP FPC-III support
[linux/fpc-iii.git] / drivers / gpu / drm / amd / display / dc / dcn10 / dcn10_init.c
blob254300b06b434b0332df1f93e5c56a18d17fcc58
1 /*
2 * Copyright 2016 Advanced Micro Devices, Inc.
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
22 * Authors: AMD
26 #include "hw_sequencer_private.h"
27 #include "dce110/dce110_hw_sequencer.h"
28 #include "dcn10_hw_sequencer.h"
30 static const struct hw_sequencer_funcs dcn10_funcs = {
31 .program_gamut_remap = dcn10_program_gamut_remap,
32 .init_hw = dcn10_init_hw,
33 .power_down_on_boot = dcn10_power_down_on_boot,
34 .apply_ctx_to_hw = dce110_apply_ctx_to_hw,
35 .apply_ctx_for_surface = dcn10_apply_ctx_for_surface,
36 .post_unlock_program_front_end = dcn10_post_unlock_program_front_end,
37 .wait_for_pending_cleared = dcn10_wait_for_pending_cleared,
38 .update_plane_addr = dcn10_update_plane_addr,
39 .update_dchub = dcn10_update_dchub,
40 .update_pending_status = dcn10_update_pending_status,
41 .program_output_csc = dcn10_program_output_csc,
42 .enable_accelerated_mode = dce110_enable_accelerated_mode,
43 .enable_timing_synchronization = dcn10_enable_timing_synchronization,
44 .enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset,
45 .update_info_frame = dce110_update_info_frame,
46 .send_immediate_sdp_message = dcn10_send_immediate_sdp_message,
47 .enable_stream = dce110_enable_stream,
48 .disable_stream = dce110_disable_stream,
49 .unblank_stream = dcn10_unblank_stream,
50 .blank_stream = dce110_blank_stream,
51 .enable_audio_stream = dce110_enable_audio_stream,
52 .disable_audio_stream = dce110_disable_audio_stream,
53 .disable_plane = dcn10_disable_plane,
54 .pipe_control_lock = dcn10_pipe_control_lock,
55 .cursor_lock = dcn10_cursor_lock,
56 .interdependent_update_lock = dcn10_lock_all_pipes,
57 .prepare_bandwidth = dcn10_prepare_bandwidth,
58 .optimize_bandwidth = dcn10_optimize_bandwidth,
59 .set_drr = dcn10_set_drr,
60 .get_position = dcn10_get_position,
61 .set_static_screen_control = dcn10_set_static_screen_control,
62 .setup_stereo = dcn10_setup_stereo,
63 .set_avmute = dce110_set_avmute,
64 .log_hw_state = dcn10_log_hw_state,
65 .get_hw_state = dcn10_get_hw_state,
66 .clear_status_bits = dcn10_clear_status_bits,
67 .wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
68 .edp_backlight_control = dce110_edp_backlight_control,
69 .edp_power_control = dce110_edp_power_control,
70 .edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready,
71 .set_cursor_position = dcn10_set_cursor_position,
72 .set_cursor_attribute = dcn10_set_cursor_attribute,
73 .set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level,
74 .setup_periodic_interrupt = dcn10_setup_periodic_interrupt,
75 .set_clock = dcn10_set_clock,
76 .get_clock = dcn10_get_clock,
77 .get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
78 .calc_vupdate_position = dcn10_calc_vupdate_position,
79 .set_backlight_level = dce110_set_backlight_level,
80 .set_abm_immediate_disable = dce110_set_abm_immediate_disable,
81 .set_pipe = dce110_set_pipe,
84 static const struct hwseq_private_funcs dcn10_private_funcs = {
85 .init_pipes = dcn10_init_pipes,
86 .update_plane_addr = dcn10_update_plane_addr,
87 .plane_atomic_disconnect = dcn10_plane_atomic_disconnect,
88 .program_pipe = dcn10_program_pipe,
89 .update_mpcc = dcn10_update_mpcc,
90 .set_input_transfer_func = dcn10_set_input_transfer_func,
91 .set_output_transfer_func = dcn10_set_output_transfer_func,
92 .power_down = dce110_power_down,
93 .enable_display_power_gating = dcn10_dummy_display_power_gating,
94 .blank_pixel_data = dcn10_blank_pixel_data,
95 .reset_hw_ctx_wrap = dcn10_reset_hw_ctx_wrap,
96 .enable_stream_timing = dcn10_enable_stream_timing,
97 .edp_backlight_control = dce110_edp_backlight_control,
98 .disable_stream_gating = NULL,
99 .enable_stream_gating = NULL,
100 .setup_vupdate_interrupt = dcn10_setup_vupdate_interrupt,
101 .did_underflow_occur = dcn10_did_underflow_occur,
102 .init_blank = NULL,
103 .disable_vga = dcn10_disable_vga,
104 .bios_golden_init = dcn10_bios_golden_init,
105 .plane_atomic_disable = dcn10_plane_atomic_disable,
106 .plane_atomic_power_down = dcn10_plane_atomic_power_down,
107 .enable_power_gating_plane = dcn10_enable_power_gating_plane,
108 .dpp_pg_control = dcn10_dpp_pg_control,
109 .hubp_pg_control = dcn10_hubp_pg_control,
110 .dsc_pg_control = NULL,
111 .get_surface_visual_confirm_color = dcn10_get_surface_visual_confirm_color,
112 .get_hdr_visual_confirm_color = dcn10_get_hdr_visual_confirm_color,
113 .set_hdr_multiplier = dcn10_set_hdr_multiplier,
114 .verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high,
117 void dcn10_hw_sequencer_construct(struct dc *dc)
119 dc->hwss = dcn10_funcs;
120 dc->hwseq->funcs = dcn10_private_funcs;