?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
WIP FPC-III support
[linux/fpc-iii.git] / drivers / gpu / drm / bridge / tc358775.c
blob2272adcc5b4adbd0c855e82ad8df1ca24f5bf36a
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * TC358775 DSI to LVDS bridge driver
4 *
5 * Copyright (C) 2020 SMART Wireless Computing
6 * Author: Vinay Simha BN <simhavcs@gmail.com>
7 *
8 */
9 /* #define DEBUG */
10 #include <linux/bitfield.h>
11 #include <linux/clk.h>
12 #include <linux/device.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/i2c.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/regulator/consumer.h>
18 #include <linux/slab.h>
19
20 #include <asm/unaligned.h>
21
22 #include <drm/drm_atomic_helper.h>
23 #include <drm/drm_bridge.h>
24 #include <drm/drm_crtc_helper.h>
25 #include <drm/drm_dp_helper.h>
26 #include <drm/drm_mipi_dsi.h>
27 #include <drm/drm_of.h>
28 #include <drm/drm_panel.h>
29 #include <drm/drm_probe_helper.h>
30
31 #define FLD_VAL(val, start, end) FIELD_PREP(GENMASK(start, end), val)
32
33 /* Registers */
34
35 /* DSI D-PHY Layer Registers */
36 #define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */
37 #define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */
38 #define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */
39 #define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */
40 #define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */
41 #define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */
42 #define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */
43 #define CLW_CNTRL 0x0040 /* Clock Lane Control */
44 #define D0W_CNTRL 0x0044 /* Data Lane 0 Control */
45 #define D1W_CNTRL 0x0048 /* Data Lane 1 Control */
46 #define D2W_CNTRL 0x004C /* Data Lane 2 Control */
47 #define D3W_CNTRL 0x0050 /* Data Lane 3 Control */
48 #define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */
49
50 /* DSI PPI Layer Registers */
51 #define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. */
52 #define PPI_START_FUNCTION 1
53
54 #define PPI_BUSYPPI 0x0108
55 #define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */
56 #define PPI_LPTXTIMECNT 0x0114
57 #define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */
58 #define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters */
59
60 /* Analog timer function enable */
61 #define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */
62 #define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */
63 #define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */
64 #define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */
65 #define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */
66
67 #define PPI_D0S_CLRSIPOCOUNT 0x0164 /* For lane 0 */
68 #define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */
69 #define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */
70 #define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */
71
72 #define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */
73 #define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */
74 #define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */
75 #define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */
76 #define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */
77 #define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */
78 #define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */
79 #define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */
80 #define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */
81 #define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */
82 #define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */
83 #define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */
84 #define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */
85 #define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */
86 #define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */
87
88 #define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */
89 #define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use only. */
90 #define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */
91 #define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */
92 #define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function */
93 #define DSI_RX_START 1
94
95 #define DSI_BUSYDSI 0x0208
96 #define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol layer. */
97 #define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */
98 #define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP state */
99
100 #define DSI_INTSTATUS 0x0220 /* Interrupt Status */
101 #define DSI_INTMASK 0x0224 /* Interrupt Mask */
102 #define DSI_INTCLR 0x0228 /* Interrupt Clear */
103 #define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */
104
105 #define DSIERRCNT 0x0300 /* DSI Error Count */
106 #define APLCTRL 0x0400 /* Application Layer Control */
107 #define RDPKTLN 0x0404 /* Command Read Packet Length */
108
109 #define VPCTRL 0x0450 /* Video Path Control */
110 #define HTIM1 0x0454 /* Horizontal Timing Control 1 */
111 #define HTIM2 0x0458 /* Horizontal Timing Control 2 */
112 #define VTIM1 0x045C /* Vertical Timing Control 1 */
113 #define VTIM2 0x0460 /* Vertical Timing Control 2 */
114 #define VFUEN 0x0464 /* Video Frame Timing Update Enable */
115 #define VFUEN_EN BIT(0) /* Upload Enable */
116
117 /* Mux Input Select for LVDS LINK Input */
118 #define LV_MX0003 0x0480 /* Bit 0 to 3 */
119 #define LV_MX0407 0x0484 /* Bit 4 to 7 */
120 #define LV_MX0811 0x0488 /* Bit 8 to 11 */
121 #define LV_MX1215 0x048C /* Bit 12 to 15 */
122 #define LV_MX1619 0x0490 /* Bit 16 to 19 */
123 #define LV_MX2023 0x0494 /* Bit 20 to 23 */
124 #define LV_MX2427 0x0498 /* Bit 24 to 27 */
125 #define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \
126 FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24))
127
128 /* Input bit numbers used in mux registers */
129 enum {
130 LVI_R0,
131 LVI_R1,
132 LVI_R2,
133 LVI_R3,
134 LVI_R4,
135 LVI_R5,
136 LVI_R6,
137 LVI_R7,
138 LVI_G0,
139 LVI_G1,
140 LVI_G2,
141 LVI_G3,
142 LVI_G4,
143 LVI_G5,
144 LVI_G6,
145 LVI_G7,
146 LVI_B0,
147 LVI_B1,
148 LVI_B2,
149 LVI_B3,
150 LVI_B4,
151 LVI_B5,
152 LVI_B6,
153 LVI_B7,
154 LVI_HS,
155 LVI_VS,
156 LVI_DE,
157 LVI_L0
158 };
159
160 #define LVCFG 0x049C /* LVDS Configuration */
161 #define LVPHY0 0x04A0 /* LVDS PHY 0 */
162 #define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */
163 #define LV_PHY0_IS(v) FLD_VAL(v, 15, 14)
164 #define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range select */
165 #define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */
166
167 #define LVPHY1 0x04A4 /* LVDS PHY 1 */
168 #define SYSSTAT 0x0500 /* System Status */
169 #define SYSRST 0x0504 /* System Reset */
170
171 #define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */
172 #define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */
173 #define SYS_RST_LCD BIT(2) /* Reset LCD controller */
174 #define SYS_RST_BM BIT(3) /* Reset Bus Management controller */
175 #define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */
176 #define SYS_RST_REG BIT(5) /* Reset Register module */
177
178 /* GPIO Registers */
179 #define GPIOC 0x0520 /* GPIO Control */
180 #define GPIOO 0x0524 /* GPIO Output */
181 #define GPIOI 0x0528 /* GPIO Input */
182
183 /* I2C Registers */
184 #define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */
185 #define I2CMADDR 0x0544 /* I2C Master Addressing */
186 #define WDATAQ 0x0548 /* Write Data Queue */
187 #define RDATAQ 0x054C /* Read Data Queue */
188
189 /* Chip ID and Revision ID Register */
190 #define IDREG 0x0580
191
192 #define LPX_PERIOD 4
193 #define TTA_GET 0x40000
194 #define TTA_SURE 6
195 #define SINGLE_LINK 1
196 #define DUAL_LINK 2
197
198 #define TC358775XBG_ID 0x00007500
199
200 /* Debug Registers */
201 #define DEBUG00 0x05A0 /* Debug */
202 #define DEBUG01 0x05A4 /* LVDS Data */
203
204 #define DSI_CLEN_BIT BIT(0)
205 #define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */
206 #define DIVIDE_BY_6 6 /* PCLK=DCLK/6 */
207 #define LVCFG_LVEN_BIT BIT(0)
208
209 #define L0EN BIT(1)
210
211 #define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000
212 #define TC358775_VPCTRL_VSDELAY__SHIFT 20
213 static inline u32 TC358775_VPCTRL_VSDELAY(uint32_t val)
214 {
215 return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) &
216 TC358775_VPCTRL_VSDELAY__MASK;
217 }
218
219 #define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100
220 #define TC358775_VPCTRL_OPXLFMT__SHIFT 8
221 static inline u32 TC358775_VPCTRL_OPXLFMT(uint32_t val)
222 {
223 return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) &
224 TC358775_VPCTRL_OPXLFMT__MASK;
225 }
226
227 #define TC358775_VPCTRL_MSF__MASK 0x00000001
228 #define TC358775_VPCTRL_MSF__SHIFT 0
229 static inline u32 TC358775_VPCTRL_MSF(uint32_t val)
230 {
231 return ((val) << TC358775_VPCTRL_MSF__SHIFT) &
232 TC358775_VPCTRL_MSF__MASK;
233 }
234
235 #define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0
236 #define TC358775_LVCFG_PCLKDIV__SHIFT 4
237 static inline u32 TC358775_LVCFG_PCLKDIV(uint32_t val)
238 {
239 return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) &
240 TC358775_LVCFG_PCLKDIV__MASK;
241 }
242
243 #define TC358775_LVCFG_LVDLINK__MASK 0x00000002
244 #define TC358775_LVCFG_LVDLINK__SHIFT 0
245 static inline u32 TC358775_LVCFG_LVDLINK(uint32_t val)
246 {
247 return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) &
248 TC358775_LVCFG_LVDLINK__MASK;
249 }
250
251 enum tc358775_ports {
252 TC358775_DSI_IN,
253 TC358775_LVDS_OUT0,
254 TC358775_LVDS_OUT1,
255 };
256
257 struct tc_data {
258 struct i2c_client *i2c;
259 struct device *dev;
260
261 struct drm_bridge bridge;
262 struct drm_bridge *panel_bridge;
263
264 struct device_node *host_node;
265 struct mipi_dsi_device *dsi;
266 u8 num_dsi_lanes;
267
268 struct regulator *vdd;
269 struct regulator *vddio;
270 struct gpio_desc *reset_gpio;
271 struct gpio_desc *stby_gpio;
272 u8 lvds_link; /* single-link or dual-link */
273 u8 bpc;
274 };
275
276 static inline struct tc_data *bridge_to_tc(struct drm_bridge *b)
277 {
278 return container_of(b, struct tc_data, bridge);
279 }
280
281 static void tc_bridge_pre_enable(struct drm_bridge *bridge)
282 {
283 struct tc_data *tc = bridge_to_tc(bridge);
284 struct device *dev = &tc->dsi->dev;
285 int ret;
286
287 ret = regulator_enable(tc->vddio);
288 if (ret < 0)
289 dev_err(dev, "regulator vddio enable failed, %d\n", ret);
290 usleep_range(10000, 11000);
291
292 ret = regulator_enable(tc->vdd);
293 if (ret < 0)
294 dev_err(dev, "regulator vdd enable failed, %d\n", ret);
295 usleep_range(10000, 11000);
296
297 gpiod_set_value(tc->stby_gpio, 0);
298 usleep_range(10000, 11000);
299
300 gpiod_set_value(tc->reset_gpio, 0);
301 usleep_range(10, 20);
302 }
303
304 static void tc_bridge_post_disable(struct drm_bridge *bridge)
305 {
306 struct tc_data *tc = bridge_to_tc(bridge);
307 struct device *dev = &tc->dsi->dev;
308 int ret;
309
310 gpiod_set_value(tc->reset_gpio, 1);
311 usleep_range(10, 20);
312
313 gpiod_set_value(tc->stby_gpio, 1);
314 usleep_range(10000, 11000);
315
316 ret = regulator_disable(tc->vdd);
317 if (ret < 0)
318 dev_err(dev, "regulator vdd disable failed, %d\n", ret);
319 usleep_range(10000, 11000);
320
321 ret = regulator_disable(tc->vddio);
322 if (ret < 0)
323 dev_err(dev, "regulator vddio disable failed, %d\n", ret);
324 usleep_range(10000, 11000);
325 }
326
327 static void d2l_read(struct i2c_client *i2c, u16 addr, u32 *val)
328 {
329 int ret;
330 u8 buf_addr[2];
331
332 put_unaligned_be16(addr, buf_addr);
333 ret = i2c_master_send(i2c, buf_addr, sizeof(buf_addr));
334 if (ret < 0)
335 goto fail;
336
337 ret = i2c_master_recv(i2c, (u8 *)val, sizeof(*val));
338 if (ret < 0)
339 goto fail;
340
341 pr_debug("d2l: I2C : addr:%04x value:%08x\n", addr, *val);
342
343 fail:
344 dev_err(&i2c->dev, "Error %d reading from subaddress 0x%x\n",
345 ret, addr);
346 }
347
348 static void d2l_write(struct i2c_client *i2c, u16 addr, u32 val)
349 {
350 u8 data[6];
351 int ret;
352
353 put_unaligned_be16(addr, data);
354 put_unaligned_le32(val, data + 2);
355
356 ret = i2c_master_send(i2c, data, ARRAY_SIZE(data));
357 if (ret < 0)
358 dev_err(&i2c->dev, "Error %d writing to subaddress 0x%x\n",
359 ret, addr);
360 }
361
362 /* helper function to access bus_formats */
363 static struct drm_connector *get_connector(struct drm_encoder *encoder)
364 {
365 struct drm_device *dev = encoder->dev;
366 struct drm_connector *connector;
367
368 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
369 if (connector->encoder == encoder)
370 return connector;
371
372 return NULL;
373 }
374
375 static void tc_bridge_enable(struct drm_bridge *bridge)
376 {
377 struct tc_data *tc = bridge_to_tc(bridge);
378 u32 hback_porch, hsync_len, hfront_porch, hactive, htime1, htime2;
379 u32 vback_porch, vsync_len, vfront_porch, vactive, vtime1, vtime2;
380 u32 val = 0;
381 u16 dsiclk, clkdiv, byteclk, t1, t2, t3, vsdelay;
382 struct drm_display_mode *mode;
383 struct drm_connector *connector = get_connector(bridge->encoder);
384
385 mode = &bridge->encoder->crtc->state->adjusted_mode;
386
387 hback_porch = mode->htotal - mode->hsync_end;
388 hsync_len = mode->hsync_end - mode->hsync_start;
389 vback_porch = mode->vtotal - mode->vsync_end;
390 vsync_len = mode->vsync_end - mode->vsync_start;
391
392 htime1 = (hback_porch << 16) + hsync_len;
393 vtime1 = (vback_porch << 16) + vsync_len;
394
395 hfront_porch = mode->hsync_start - mode->hdisplay;
396 hactive = mode->hdisplay;
397 vfront_porch = mode->vsync_start - mode->vdisplay;
398 vactive = mode->vdisplay;
399
400 htime2 = (hfront_porch << 16) + hactive;
401 vtime2 = (vfront_porch << 16) + vactive;
402
403 d2l_read(tc->i2c, IDREG, &val);
404
405 dev_info(tc->dev, "DSI2LVDS Chip ID.%02x Revision ID. %02x **\n",
406 (val >> 8) & 0xFF, val & 0xFF);
407
408 d2l_write(tc->i2c, SYSRST, SYS_RST_REG | SYS_RST_DSIRX | SYS_RST_BM |
409 SYS_RST_LCD | SYS_RST_I2CM | SYS_RST_I2CS);
410 usleep_range(30000, 40000);
411
412 d2l_write(tc->i2c, PPI_TX_RX_TA, TTA_GET | TTA_SURE);
413 d2l_write(tc->i2c, PPI_LPTXTIMECNT, LPX_PERIOD);
414 d2l_write(tc->i2c, PPI_D0S_CLRSIPOCOUNT, 3);
415 d2l_write(tc->i2c, PPI_D1S_CLRSIPOCOUNT, 3);
416 d2l_write(tc->i2c, PPI_D2S_CLRSIPOCOUNT, 3);
417 d2l_write(tc->i2c, PPI_D3S_CLRSIPOCOUNT, 3);
418
419 val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT;
420 d2l_write(tc->i2c, PPI_LANEENABLE, val);
421 d2l_write(tc->i2c, DSI_LANEENABLE, val);
422
423 d2l_write(tc->i2c, PPI_STARTPPI, PPI_START_FUNCTION);
424 d2l_write(tc->i2c, DSI_STARTDSI, DSI_RX_START);
425
426 if (tc->bpc == 8)
427 val = TC358775_VPCTRL_OPXLFMT(1);
428 else /* bpc = 6; */
429 val = TC358775_VPCTRL_MSF(1);
430
431 dsiclk = mode->crtc_clock * 3 * tc->bpc / tc->num_dsi_lanes / 1000;
432 clkdiv = dsiclk / DIVIDE_BY_3 * tc->lvds_link;
433 byteclk = dsiclk / 4;
434 t1 = hactive * (tc->bpc * 3 / 8) / tc->num_dsi_lanes;
435 t2 = ((100000 / clkdiv)) * (hactive + hback_porch + hsync_len + hfront_porch) / 1000;
436 t3 = ((t2 * byteclk) / 100) - (hactive * (tc->bpc * 3 / 8) /
437 tc->num_dsi_lanes);
438
439 vsdelay = (clkdiv * (t1 + t3) / byteclk) - hback_porch - hsync_len - hactive;
440
441 val |= TC358775_VPCTRL_VSDELAY(vsdelay);
442 d2l_write(tc->i2c, VPCTRL, val);
443
444 d2l_write(tc->i2c, HTIM1, htime1);
445 d2l_write(tc->i2c, VTIM1, vtime1);
446 d2l_write(tc->i2c, HTIM2, htime2);
447 d2l_write(tc->i2c, VTIM2, vtime2);
448
449 d2l_write(tc->i2c, VFUEN, VFUEN_EN);
450 d2l_write(tc->i2c, SYSRST, SYS_RST_LCD);
451 d2l_write(tc->i2c, LVPHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_ND(6));
452
453 dev_dbg(tc->dev, "bus_formats %04x bpc %d\n",
454 connector->display_info.bus_formats[0],
455 tc->bpc);
456 /*
457 * Default hardware register settings of tc358775 configured
458 * with MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA jeida-24 format
459 */
460 if (connector->display_info.bus_formats[0] ==
461 MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) {
462 /* VESA-24 */
463 d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3));
464 d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0));
465 d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7));
466 d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0));
467 d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2));
468 d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0));
469 d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6));
470 } else { /* MEDIA_BUS_FMT_RGB666_1X7X3_SPWG - JEIDA-18 */
471 d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3));
472 d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_L0, LVI_R5, LVI_G0));
473 d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_L0, LVI_L0));
474 d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0));
475 d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_L0, LVI_L0, LVI_B1, LVI_B2));
476 d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0));
477 d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_L0));
478 }
479
480 d2l_write(tc->i2c, VFUEN, VFUEN_EN);
481
482 val = LVCFG_LVEN_BIT;
483 if (tc->lvds_link == DUAL_LINK) {
484 val |= TC358775_LVCFG_LVDLINK(1);
485 val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_6);
486 } else {
487 val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3);
488 }
489 d2l_write(tc->i2c, LVCFG, val);
490 }
491
492 static enum drm_mode_status
493 tc_mode_valid(struct drm_bridge *bridge,
494 const struct drm_display_info *info,
495 const struct drm_display_mode *mode)
496 {
497 struct tc_data *tc = bridge_to_tc(bridge);
498
499 /*
500 * Maximum pixel clock speed 135MHz for single-link
501 * 270MHz for dual-link
502 */
503 if ((mode->clock > 135000 && tc->lvds_link == SINGLE_LINK) ||
504 (mode->clock > 270000 && tc->lvds_link == DUAL_LINK))
505 return MODE_CLOCK_HIGH;
506
507 switch (info->bus_formats[0]) {
508 case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
509 case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
510 /* RGB888 */
511 tc->bpc = 8;
512 break;
513 case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
514 /* RGB666 */
515 tc->bpc = 6;
516 break;
517 default:
518 dev_warn(tc->dev,
519 "unsupported LVDS bus format 0x%04x\n",
520 info->bus_formats[0]);
521 return MODE_NOMODE;
522 }
523
524 return MODE_OK;
525 }
526
527 static int tc358775_parse_dt(struct device_node *np, struct tc_data *tc)
528 {
529 struct device_node *endpoint;
530 struct device_node *parent;
531 struct device_node *remote;
532 struct property *prop;
533 int len = 0;
534
535 /*
536 * To get the data-lanes of dsi, we need to access the dsi0_out of port1
537 * of dsi0 endpoint from bridge port0 of d2l_in
538 */
539 endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node,
540 TC358775_DSI_IN, -1);
541 if (endpoint) {
542 /* dsi0_out node */
543 parent = of_graph_get_remote_port_parent(endpoint);
544 of_node_put(endpoint);
545 if (parent) {
546 /* dsi0 port 1 */
547 endpoint = of_graph_get_endpoint_by_regs(parent, 1, -1);
548 of_node_put(parent);
549 if (endpoint) {
550 prop = of_find_property(endpoint, "data-lanes",
551 &len);
552 of_node_put(endpoint);
553 if (!prop) {
554 dev_err(tc->dev,
555 "failed to find data lane\n");
556 return -EPROBE_DEFER;
557 }
558 }
559 }
560 }
561
562 tc->num_dsi_lanes = len / sizeof(u32);
563
564 if (tc->num_dsi_lanes < 1 || tc->num_dsi_lanes > 4)
565 return -EINVAL;
566
567 tc->host_node = of_graph_get_remote_node(np, 0, 0);
568 if (!tc->host_node)
569 return -ENODEV;
570
571 of_node_put(tc->host_node);
572
573 tc->lvds_link = SINGLE_LINK;
574 endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node,
575 TC358775_LVDS_OUT1, -1);
576 if (endpoint) {
577 remote = of_graph_get_remote_port_parent(endpoint);
578 of_node_put(endpoint);
579
580 if (remote) {
581 if (of_device_is_available(remote))
582 tc->lvds_link = DUAL_LINK;
583 of_node_put(remote);
584 }
585 }
586
587 dev_dbg(tc->dev, "no.of dsi lanes: %d\n", tc->num_dsi_lanes);
588 dev_dbg(tc->dev, "operating in %d-link mode\n", tc->lvds_link);
589
590 return 0;
591 }
592
593 static int tc_bridge_attach(struct drm_bridge *bridge,
594 enum drm_bridge_attach_flags flags)
595 {
596 struct tc_data *tc = bridge_to_tc(bridge);
597 struct device *dev = &tc->i2c->dev;
598 struct mipi_dsi_host *host;
599 struct mipi_dsi_device *dsi;
600 int ret;
601
602 const struct mipi_dsi_device_info info = { .type = "tc358775",
603 .channel = 0,
604 .node = NULL,
605 };
606
607 host = of_find_mipi_dsi_host_by_node(tc->host_node);
608 if (!host) {
609 dev_err(dev, "failed to find dsi host\n");
610 return -EPROBE_DEFER;
611 }
612
613 dsi = mipi_dsi_device_register_full(host, &info);
614 if (IS_ERR(dsi)) {
615 dev_err(dev, "failed to create dsi device\n");
616 ret = PTR_ERR(dsi);
617 goto err_dsi_device;
618 }
619
620 tc->dsi = dsi;
621
622 dsi->lanes = tc->num_dsi_lanes;
623 dsi->format = MIPI_DSI_FMT_RGB888;
624 dsi->mode_flags = MIPI_DSI_MODE_VIDEO;
625
626 ret = mipi_dsi_attach(dsi);
627 if (ret < 0) {
628 dev_err(dev, "failed to attach dsi to host\n");
629 goto err_dsi_attach;
630 }
631
632 /* Attach the panel-bridge to the dsi bridge */
633 return drm_bridge_attach(bridge->encoder, tc->panel_bridge,
634 &tc->bridge, flags);
635 err_dsi_attach:
636 mipi_dsi_device_unregister(dsi);
637 err_dsi_device:
638 return ret;
639 }
640
641 static const struct drm_bridge_funcs tc_bridge_funcs = {
642 .attach = tc_bridge_attach,
643 .pre_enable = tc_bridge_pre_enable,
644 .enable = tc_bridge_enable,
645 .mode_valid = tc_mode_valid,
646 .post_disable = tc_bridge_post_disable,
647 };
648
649 static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
650 {
651 struct device *dev = &client->dev;
652 struct drm_panel *panel;
653 struct tc_data *tc;
654 int ret;
655
656 tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
657 if (!tc)
658 return -ENOMEM;
659
660 tc->dev = dev;
661 tc->i2c = client;
662
663 ret = drm_of_find_panel_or_bridge(dev->of_node, TC358775_LVDS_OUT0,
664 0, &panel, NULL);
665 if (ret < 0)
666 return ret;
667 if (!panel)
668 return -ENODEV;
669
670 tc->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
671 if (IS_ERR(tc->panel_bridge))
672 return PTR_ERR(tc->panel_bridge);
673
674 ret = tc358775_parse_dt(dev->of_node, tc);
675 if (ret)
676 return ret;
677
678 tc->vddio = devm_regulator_get(dev, "vddio-supply");
679 if (IS_ERR(tc->vddio)) {
680 ret = PTR_ERR(tc->vddio);
681 dev_err(dev, "vddio-supply not found\n");
682 return ret;
683 }
684
685 tc->vdd = devm_regulator_get(dev, "vdd-supply");
686 if (IS_ERR(tc->vdd)) {
687 ret = PTR_ERR(tc->vdd);
688 dev_err(dev, "vdd-supply not found\n");
689 return ret;
690 }
691
692 tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH);
693 if (IS_ERR(tc->stby_gpio)) {
694 ret = PTR_ERR(tc->stby_gpio);
695 dev_err(dev, "cannot get stby-gpio %d\n", ret);
696 return ret;
697 }
698
699 tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
700 if (IS_ERR(tc->reset_gpio)) {
701 ret = PTR_ERR(tc->reset_gpio);
702 dev_err(dev, "cannot get reset-gpios %d\n", ret);
703 return ret;
704 }
705
706 tc->bridge.funcs = &tc_bridge_funcs;
707 tc->bridge.of_node = dev->of_node;
708 drm_bridge_add(&tc->bridge);
709
710 i2c_set_clientdata(client, tc);
711
712 return 0;
713 }
714
715 static int tc_remove(struct i2c_client *client)
716 {
717 struct tc_data *tc = i2c_get_clientdata(client);
718
719 drm_bridge_remove(&tc->bridge);
720
721 return 0;
722 }
723
724 static const struct i2c_device_id tc358775_i2c_ids[] = {
725 { "tc358775", 0 },
726 { }
727 };
728 MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids);
729
730 static const struct of_device_id tc358775_of_ids[] = {
731 { .compatible = "toshiba,tc358775", },
732 { }
733 };
734 MODULE_DEVICE_TABLE(of, tc358775_of_ids);
735
736 static struct i2c_driver tc358775_driver = {
737 .driver = {
738 .name = "tc358775",
739 .of_match_table = tc358775_of_ids,
740 },
741 .id_table = tc358775_i2c_ids,
742 .probe = tc_probe,
743 .remove = tc_remove,
744 };
745 module_i2c_driver(tc358775_driver);
746
747 MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>");
748 MODULE_DESCRIPTION("TC358775 DSI/LVDS bridge driver");
749 MODULE_LICENSE("GPL v2");
Linux with added FPC-III support