1 // SPDX-License-Identifier: GPL-2.0 OR MIT
2 /**************************************************************************
4 * Copyright 2009-2015 VMware, Inc., Palo Alto, CA., USA
6 * Permission is hereby granted, free of charge, to any person obtaining a
7 * copy of this software and associated documentation files (the
8 * "Software"), to deal in the Software without restriction, including
9 * without limitation the rights to use, copy, modify, merge, publish,
10 * distribute, sub license, and/or sell copies of the Software, and to
11 * permit persons to whom the Software is furnished to do so, subject to
12 * the following conditions:
14 * The above copyright notice and this permission notice (including the
15 * next paragraph) shall be included in all copies or substantial portions
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
21 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
22 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
23 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
24 * USE OR OTHER DEALINGS IN THE SOFTWARE.
26 **************************************************************************/
28 #include <drm/drm_atomic.h>
29 #include <drm/drm_atomic_helper.h>
30 #include <drm/drm_damage_helper.h>
31 #include <drm/drm_fourcc.h>
32 #include <drm/drm_plane_helper.h>
33 #include <drm/drm_rect.h>
34 #include <drm/drm_sysfs.h>
35 #include <drm/drm_vblank.h>
37 #include "vmwgfx_kms.h"
39 /* Might need a hrtimer here? */
40 #define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1)
42 void vmw_du_cleanup(struct vmw_display_unit
*du
)
44 drm_plane_cleanup(&du
->primary
);
45 drm_plane_cleanup(&du
->cursor
);
47 drm_connector_unregister(&du
->connector
);
48 drm_crtc_cleanup(&du
->crtc
);
49 drm_encoder_cleanup(&du
->encoder
);
50 drm_connector_cleanup(&du
->connector
);
54 * Display Unit Cursor functions
57 static int vmw_cursor_update_image(struct vmw_private
*dev_priv
,
58 u32
*image
, u32 width
, u32 height
,
59 u32 hotspotX
, u32 hotspotY
)
63 SVGAFifoCmdDefineAlphaCursor cursor
;
65 u32 image_size
= width
* height
* 4;
66 u32 cmd_size
= sizeof(*cmd
) + image_size
;
71 cmd
= VMW_FIFO_RESERVE(dev_priv
, cmd_size
);
72 if (unlikely(cmd
== NULL
))
75 memset(cmd
, 0, sizeof(*cmd
));
77 memcpy(&cmd
[1], image
, image_size
);
79 cmd
->cmd
= SVGA_CMD_DEFINE_ALPHA_CURSOR
;
81 cmd
->cursor
.width
= width
;
82 cmd
->cursor
.height
= height
;
83 cmd
->cursor
.hotspotX
= hotspotX
;
84 cmd
->cursor
.hotspotY
= hotspotY
;
86 vmw_fifo_commit_flush(dev_priv
, cmd_size
);
91 static int vmw_cursor_update_bo(struct vmw_private
*dev_priv
,
92 struct vmw_buffer_object
*bo
,
93 u32 width
, u32 height
,
94 u32 hotspotX
, u32 hotspotY
)
96 struct ttm_bo_kmap_obj map
;
97 unsigned long kmap_offset
;
98 unsigned long kmap_num
;
104 kmap_num
= (width
*height
*4 + PAGE_SIZE
- 1) >> PAGE_SHIFT
;
106 ret
= ttm_bo_reserve(&bo
->base
, true, false, NULL
);
107 if (unlikely(ret
!= 0)) {
108 DRM_ERROR("reserve failed\n");
112 ret
= ttm_bo_kmap(&bo
->base
, kmap_offset
, kmap_num
, &map
);
113 if (unlikely(ret
!= 0))
116 virtual = ttm_kmap_obj_virtual(&map
, &dummy
);
117 ret
= vmw_cursor_update_image(dev_priv
, virtual, width
, height
,
122 ttm_bo_unreserve(&bo
->base
);
128 static void vmw_cursor_update_position(struct vmw_private
*dev_priv
,
129 bool show
, int x
, int y
)
131 u32
*fifo_mem
= dev_priv
->mmio_virt
;
134 spin_lock(&dev_priv
->cursor_lock
);
135 vmw_mmio_write(show
? 1 : 0, fifo_mem
+ SVGA_FIFO_CURSOR_ON
);
136 vmw_mmio_write(x
, fifo_mem
+ SVGA_FIFO_CURSOR_X
);
137 vmw_mmio_write(y
, fifo_mem
+ SVGA_FIFO_CURSOR_Y
);
138 count
= vmw_mmio_read(fifo_mem
+ SVGA_FIFO_CURSOR_COUNT
);
139 vmw_mmio_write(++count
, fifo_mem
+ SVGA_FIFO_CURSOR_COUNT
);
140 spin_unlock(&dev_priv
->cursor_lock
);
144 void vmw_kms_cursor_snoop(struct vmw_surface
*srf
,
145 struct ttm_object_file
*tfile
,
146 struct ttm_buffer_object
*bo
,
147 SVGA3dCmdHeader
*header
)
149 struct ttm_bo_kmap_obj map
;
150 unsigned long kmap_offset
;
151 unsigned long kmap_num
;
157 SVGA3dCmdHeader header
;
158 SVGA3dCmdSurfaceDMA dma
;
162 cmd
= container_of(header
, struct vmw_dma_cmd
, header
);
164 /* No snooper installed */
165 if (!srf
->snooper
.image
)
168 if (cmd
->dma
.host
.face
!= 0 || cmd
->dma
.host
.mipmap
!= 0) {
169 DRM_ERROR("face and mipmap for cursors should never != 0\n");
173 if (cmd
->header
.size
< 64) {
174 DRM_ERROR("at least one full copy box must be given\n");
178 box
= (SVGA3dCopyBox
*)&cmd
[1];
179 box_count
= (cmd
->header
.size
- sizeof(SVGA3dCmdSurfaceDMA
)) /
180 sizeof(SVGA3dCopyBox
);
182 if (cmd
->dma
.guest
.ptr
.offset
% PAGE_SIZE
||
183 box
->x
!= 0 || box
->y
!= 0 || box
->z
!= 0 ||
184 box
->srcx
!= 0 || box
->srcy
!= 0 || box
->srcz
!= 0 ||
185 box
->d
!= 1 || box_count
!= 1) {
186 /* TODO handle none page aligned offsets */
187 /* TODO handle more dst & src != 0 */
188 /* TODO handle more then one copy */
189 DRM_ERROR("Can't snoop dma request for cursor!\n");
190 DRM_ERROR("(%u, %u, %u) (%u, %u, %u) (%ux%ux%u) %u %u\n",
191 box
->srcx
, box
->srcy
, box
->srcz
,
192 box
->x
, box
->y
, box
->z
,
193 box
->w
, box
->h
, box
->d
, box_count
,
194 cmd
->dma
.guest
.ptr
.offset
);
198 kmap_offset
= cmd
->dma
.guest
.ptr
.offset
>> PAGE_SHIFT
;
199 kmap_num
= (64*64*4) >> PAGE_SHIFT
;
201 ret
= ttm_bo_reserve(bo
, true, false, NULL
);
202 if (unlikely(ret
!= 0)) {
203 DRM_ERROR("reserve failed\n");
207 ret
= ttm_bo_kmap(bo
, kmap_offset
, kmap_num
, &map
);
208 if (unlikely(ret
!= 0))
211 virtual = ttm_kmap_obj_virtual(&map
, &dummy
);
213 if (box
->w
== 64 && cmd
->dma
.guest
.pitch
== 64*4) {
214 memcpy(srf
->snooper
.image
, virtual, 64*64*4);
216 /* Image is unsigned pointer. */
217 for (i
= 0; i
< box
->h
; i
++)
218 memcpy(srf
->snooper
.image
+ i
* 64,
219 virtual + i
* cmd
->dma
.guest
.pitch
,
227 ttm_bo_unreserve(bo
);
231 * vmw_kms_legacy_hotspot_clear - Clear legacy hotspots
233 * @dev_priv: Pointer to the device private struct.
235 * Clears all legacy hotspots.
237 void vmw_kms_legacy_hotspot_clear(struct vmw_private
*dev_priv
)
239 struct drm_device
*dev
= dev_priv
->dev
;
240 struct vmw_display_unit
*du
;
241 struct drm_crtc
*crtc
;
243 drm_modeset_lock_all(dev
);
244 drm_for_each_crtc(crtc
, dev
) {
245 du
= vmw_crtc_to_du(crtc
);
250 drm_modeset_unlock_all(dev
);
253 void vmw_kms_cursor_post_execbuf(struct vmw_private
*dev_priv
)
255 struct drm_device
*dev
= dev_priv
->dev
;
256 struct vmw_display_unit
*du
;
257 struct drm_crtc
*crtc
;
259 mutex_lock(&dev
->mode_config
.mutex
);
261 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
262 du
= vmw_crtc_to_du(crtc
);
263 if (!du
->cursor_surface
||
264 du
->cursor_age
== du
->cursor_surface
->snooper
.age
)
267 du
->cursor_age
= du
->cursor_surface
->snooper
.age
;
268 vmw_cursor_update_image(dev_priv
,
269 du
->cursor_surface
->snooper
.image
,
271 du
->hotspot_x
+ du
->core_hotspot_x
,
272 du
->hotspot_y
+ du
->core_hotspot_y
);
275 mutex_unlock(&dev
->mode_config
.mutex
);
279 void vmw_du_cursor_plane_destroy(struct drm_plane
*plane
)
281 vmw_cursor_update_position(plane
->dev
->dev_private
, false, 0, 0);
283 drm_plane_cleanup(plane
);
287 void vmw_du_primary_plane_destroy(struct drm_plane
*plane
)
289 drm_plane_cleanup(plane
);
291 /* Planes are static in our case so we don't free it */
296 * vmw_du_vps_unpin_surf - unpins resource associated with a framebuffer surface
298 * @vps: plane state associated with the display surface
299 * @unreference: true if we also want to unreference the display.
301 void vmw_du_plane_unpin_surf(struct vmw_plane_state
*vps
,
306 vmw_resource_unpin(&vps
->surf
->res
);
312 DRM_ERROR("Surface still pinned\n");
313 vmw_surface_unreference(&vps
->surf
);
320 * vmw_du_plane_cleanup_fb - Unpins the cursor
322 * @plane: display plane
323 * @old_state: Contains the FB to clean up
325 * Unpins the framebuffer surface
327 * Returns 0 on success
330 vmw_du_plane_cleanup_fb(struct drm_plane
*plane
,
331 struct drm_plane_state
*old_state
)
333 struct vmw_plane_state
*vps
= vmw_plane_state_to_vps(old_state
);
335 vmw_du_plane_unpin_surf(vps
, false);
340 * vmw_du_cursor_plane_prepare_fb - Readies the cursor by referencing it
342 * @plane: display plane
343 * @new_state: info on the new plane state, including the FB
345 * Returns 0 on success
348 vmw_du_cursor_plane_prepare_fb(struct drm_plane
*plane
,
349 struct drm_plane_state
*new_state
)
351 struct drm_framebuffer
*fb
= new_state
->fb
;
352 struct vmw_plane_state
*vps
= vmw_plane_state_to_vps(new_state
);
356 vmw_surface_unreference(&vps
->surf
);
359 vmw_bo_unreference(&vps
->bo
);
362 if (vmw_framebuffer_to_vfb(fb
)->bo
) {
363 vps
->bo
= vmw_framebuffer_to_vfbd(fb
)->buffer
;
364 vmw_bo_reference(vps
->bo
);
366 vps
->surf
= vmw_framebuffer_to_vfbs(fb
)->surface
;
367 vmw_surface_reference(vps
->surf
);
376 vmw_du_cursor_plane_atomic_update(struct drm_plane
*plane
,
377 struct drm_plane_state
*old_state
)
379 struct drm_crtc
*crtc
= plane
->state
->crtc
?: old_state
->crtc
;
380 struct vmw_private
*dev_priv
= vmw_priv(crtc
->dev
);
381 struct vmw_display_unit
*du
= vmw_crtc_to_du(crtc
);
382 struct vmw_plane_state
*vps
= vmw_plane_state_to_vps(plane
->state
);
383 s32 hotspot_x
, hotspot_y
;
387 hotspot_x
= du
->hotspot_x
;
388 hotspot_y
= du
->hotspot_y
;
390 if (plane
->state
->fb
) {
391 hotspot_x
+= plane
->state
->fb
->hot_x
;
392 hotspot_y
+= plane
->state
->fb
->hot_y
;
395 du
->cursor_surface
= vps
->surf
;
396 du
->cursor_bo
= vps
->bo
;
399 du
->cursor_age
= du
->cursor_surface
->snooper
.age
;
401 ret
= vmw_cursor_update_image(dev_priv
,
402 vps
->surf
->snooper
.image
,
405 } else if (vps
->bo
) {
406 ret
= vmw_cursor_update_bo(dev_priv
, vps
->bo
,
407 plane
->state
->crtc_w
,
408 plane
->state
->crtc_h
,
409 hotspot_x
, hotspot_y
);
411 vmw_cursor_update_position(dev_priv
, false, 0, 0);
416 du
->cursor_x
= plane
->state
->crtc_x
+ du
->set_gui_x
;
417 du
->cursor_y
= plane
->state
->crtc_y
+ du
->set_gui_y
;
419 vmw_cursor_update_position(dev_priv
, true,
420 du
->cursor_x
+ hotspot_x
,
421 du
->cursor_y
+ hotspot_y
);
423 du
->core_hotspot_x
= hotspot_x
- du
->hotspot_x
;
424 du
->core_hotspot_y
= hotspot_y
- du
->hotspot_y
;
426 DRM_ERROR("Failed to update cursor image\n");
432 * vmw_du_primary_plane_atomic_check - check if the new state is okay
434 * @plane: display plane
435 * @state: info on the new plane state, including the FB
437 * Check if the new state is settable given the current state. Other
438 * than what the atomic helper checks, we care about crtc fitting
439 * the FB and maintaining one active framebuffer.
441 * Returns 0 on success
443 int vmw_du_primary_plane_atomic_check(struct drm_plane
*plane
,
444 struct drm_plane_state
*state
)
446 struct drm_crtc_state
*crtc_state
= NULL
;
447 struct drm_framebuffer
*new_fb
= state
->fb
;
451 crtc_state
= drm_atomic_get_new_crtc_state(state
->state
, state
->crtc
);
453 ret
= drm_atomic_helper_check_plane_state(state
, crtc_state
,
454 DRM_PLANE_HELPER_NO_SCALING
,
455 DRM_PLANE_HELPER_NO_SCALING
,
458 if (!ret
&& new_fb
) {
459 struct drm_crtc
*crtc
= state
->crtc
;
460 struct vmw_connector_state
*vcs
;
461 struct vmw_display_unit
*du
= vmw_crtc_to_du(crtc
);
463 vcs
= vmw_connector_state_to_vcs(du
->connector
.state
);
472 * vmw_du_cursor_plane_atomic_check - check if the new state is okay
474 * @plane: cursor plane
475 * @state: info on the new plane state
477 * This is a chance to fail if the new cursor state does not fit
480 * Returns 0 on success
482 int vmw_du_cursor_plane_atomic_check(struct drm_plane
*plane
,
483 struct drm_plane_state
*new_state
)
486 struct drm_crtc_state
*crtc_state
= NULL
;
487 struct vmw_surface
*surface
= NULL
;
488 struct drm_framebuffer
*fb
= new_state
->fb
;
491 crtc_state
= drm_atomic_get_new_crtc_state(new_state
->state
,
494 ret
= drm_atomic_helper_check_plane_state(new_state
, crtc_state
,
495 DRM_PLANE_HELPER_NO_SCALING
,
496 DRM_PLANE_HELPER_NO_SCALING
,
505 /* A lot of the code assumes this */
506 if (new_state
->crtc_w
!= 64 || new_state
->crtc_h
!= 64) {
507 DRM_ERROR("Invalid cursor dimensions (%d, %d)\n",
508 new_state
->crtc_w
, new_state
->crtc_h
);
512 if (!vmw_framebuffer_to_vfb(fb
)->bo
)
513 surface
= vmw_framebuffer_to_vfbs(fb
)->surface
;
515 if (surface
&& !surface
->snooper
.image
) {
516 DRM_ERROR("surface not suitable for cursor\n");
524 int vmw_du_crtc_atomic_check(struct drm_crtc
*crtc
,
525 struct drm_atomic_state
*state
)
527 struct drm_crtc_state
*new_state
= drm_atomic_get_new_crtc_state(state
,
529 struct vmw_display_unit
*du
= vmw_crtc_to_du(new_state
->crtc
);
530 int connector_mask
= drm_connector_mask(&du
->connector
);
531 bool has_primary
= new_state
->plane_mask
&
532 drm_plane_mask(crtc
->primary
);
534 /* We always want to have an active plane with an active CRTC */
535 if (has_primary
!= new_state
->enable
)
539 if (new_state
->connector_mask
!= connector_mask
&&
540 new_state
->connector_mask
!= 0) {
541 DRM_ERROR("Invalid connectors configuration\n");
546 * Our virtual device does not have a dot clock, so use the logical
547 * clock value as the dot clock.
549 if (new_state
->mode
.crtc_clock
== 0)
550 new_state
->adjusted_mode
.crtc_clock
= new_state
->mode
.clock
;
556 void vmw_du_crtc_atomic_begin(struct drm_crtc
*crtc
,
557 struct drm_atomic_state
*state
)
562 void vmw_du_crtc_atomic_flush(struct drm_crtc
*crtc
,
563 struct drm_atomic_state
*state
)
565 struct drm_pending_vblank_event
*event
= crtc
->state
->event
;
568 crtc
->state
->event
= NULL
;
570 spin_lock_irq(&crtc
->dev
->event_lock
);
571 drm_crtc_send_vblank_event(crtc
, event
);
572 spin_unlock_irq(&crtc
->dev
->event_lock
);
578 * vmw_du_crtc_duplicate_state - duplicate crtc state
581 * Allocates and returns a copy of the crtc state (both common and
582 * vmw-specific) for the specified crtc.
584 * Returns: The newly allocated crtc state, or NULL on failure.
586 struct drm_crtc_state
*
587 vmw_du_crtc_duplicate_state(struct drm_crtc
*crtc
)
589 struct drm_crtc_state
*state
;
590 struct vmw_crtc_state
*vcs
;
592 if (WARN_ON(!crtc
->state
))
595 vcs
= kmemdup(crtc
->state
, sizeof(*vcs
), GFP_KERNEL
);
602 __drm_atomic_helper_crtc_duplicate_state(crtc
, state
);
609 * vmw_du_crtc_reset - creates a blank vmw crtc state
612 * Resets the atomic state for @crtc by freeing the state pointer (which
613 * might be NULL, e.g. at driver load time) and allocating a new empty state
616 void vmw_du_crtc_reset(struct drm_crtc
*crtc
)
618 struct vmw_crtc_state
*vcs
;
622 __drm_atomic_helper_crtc_destroy_state(crtc
->state
);
624 kfree(vmw_crtc_state_to_vcs(crtc
->state
));
627 vcs
= kzalloc(sizeof(*vcs
), GFP_KERNEL
);
630 DRM_ERROR("Cannot allocate vmw_crtc_state\n");
634 __drm_atomic_helper_crtc_reset(crtc
, &vcs
->base
);
639 * vmw_du_crtc_destroy_state - destroy crtc state
641 * @state: state object to destroy
643 * Destroys the crtc state (both common and vmw-specific) for the
647 vmw_du_crtc_destroy_state(struct drm_crtc
*crtc
,
648 struct drm_crtc_state
*state
)
650 drm_atomic_helper_crtc_destroy_state(crtc
, state
);
655 * vmw_du_plane_duplicate_state - duplicate plane state
658 * Allocates and returns a copy of the plane state (both common and
659 * vmw-specific) for the specified plane.
661 * Returns: The newly allocated plane state, or NULL on failure.
663 struct drm_plane_state
*
664 vmw_du_plane_duplicate_state(struct drm_plane
*plane
)
666 struct drm_plane_state
*state
;
667 struct vmw_plane_state
*vps
;
669 vps
= kmemdup(plane
->state
, sizeof(*vps
), GFP_KERNEL
);
677 /* Each ref counted resource needs to be acquired again */
679 (void) vmw_surface_reference(vps
->surf
);
682 (void) vmw_bo_reference(vps
->bo
);
686 __drm_atomic_helper_plane_duplicate_state(plane
, state
);
693 * vmw_du_plane_reset - creates a blank vmw plane state
696 * Resets the atomic state for @plane by freeing the state pointer (which might
697 * be NULL, e.g. at driver load time) and allocating a new empty state object.
699 void vmw_du_plane_reset(struct drm_plane
*plane
)
701 struct vmw_plane_state
*vps
;
705 vmw_du_plane_destroy_state(plane
, plane
->state
);
707 vps
= kzalloc(sizeof(*vps
), GFP_KERNEL
);
710 DRM_ERROR("Cannot allocate vmw_plane_state\n");
714 __drm_atomic_helper_plane_reset(plane
, &vps
->base
);
719 * vmw_du_plane_destroy_state - destroy plane state
721 * @state: state object to destroy
723 * Destroys the plane state (both common and vmw-specific) for the
727 vmw_du_plane_destroy_state(struct drm_plane
*plane
,
728 struct drm_plane_state
*state
)
730 struct vmw_plane_state
*vps
= vmw_plane_state_to_vps(state
);
733 /* Should have been freed by cleanup_fb */
735 vmw_surface_unreference(&vps
->surf
);
738 vmw_bo_unreference(&vps
->bo
);
740 drm_atomic_helper_plane_destroy_state(plane
, state
);
745 * vmw_du_connector_duplicate_state - duplicate connector state
746 * @connector: DRM connector
748 * Allocates and returns a copy of the connector state (both common and
749 * vmw-specific) for the specified connector.
751 * Returns: The newly allocated connector state, or NULL on failure.
753 struct drm_connector_state
*
754 vmw_du_connector_duplicate_state(struct drm_connector
*connector
)
756 struct drm_connector_state
*state
;
757 struct vmw_connector_state
*vcs
;
759 if (WARN_ON(!connector
->state
))
762 vcs
= kmemdup(connector
->state
, sizeof(*vcs
), GFP_KERNEL
);
769 __drm_atomic_helper_connector_duplicate_state(connector
, state
);
776 * vmw_du_connector_reset - creates a blank vmw connector state
777 * @connector: DRM connector
779 * Resets the atomic state for @connector by freeing the state pointer (which
780 * might be NULL, e.g. at driver load time) and allocating a new empty state
783 void vmw_du_connector_reset(struct drm_connector
*connector
)
785 struct vmw_connector_state
*vcs
;
788 if (connector
->state
) {
789 __drm_atomic_helper_connector_destroy_state(connector
->state
);
791 kfree(vmw_connector_state_to_vcs(connector
->state
));
794 vcs
= kzalloc(sizeof(*vcs
), GFP_KERNEL
);
797 DRM_ERROR("Cannot allocate vmw_connector_state\n");
801 __drm_atomic_helper_connector_reset(connector
, &vcs
->base
);
806 * vmw_du_connector_destroy_state - destroy connector state
807 * @connector: DRM connector
808 * @state: state object to destroy
810 * Destroys the connector state (both common and vmw-specific) for the
814 vmw_du_connector_destroy_state(struct drm_connector
*connector
,
815 struct drm_connector_state
*state
)
817 drm_atomic_helper_connector_destroy_state(connector
, state
);
820 * Generic framebuffer code
824 * Surface framebuffer code
827 static void vmw_framebuffer_surface_destroy(struct drm_framebuffer
*framebuffer
)
829 struct vmw_framebuffer_surface
*vfbs
=
830 vmw_framebuffer_to_vfbs(framebuffer
);
832 drm_framebuffer_cleanup(framebuffer
);
833 vmw_surface_unreference(&vfbs
->surface
);
834 if (vfbs
->base
.user_obj
)
835 ttm_base_object_unref(&vfbs
->base
.user_obj
);
841 * vmw_kms_readback - Perform a readback from the screen system to
842 * a buffer-object backed framebuffer.
844 * @dev_priv: Pointer to the device private structure.
845 * @file_priv: Pointer to a struct drm_file identifying the caller.
846 * Must be set to NULL if @user_fence_rep is NULL.
847 * @vfb: Pointer to the buffer-object backed framebuffer.
848 * @user_fence_rep: User-space provided structure for fence information.
849 * Must be set to non-NULL if @file_priv is non-NULL.
850 * @vclips: Array of clip rects.
851 * @num_clips: Number of clip rects in @vclips.
853 * Returns 0 on success, negative error code on failure. -ERESTARTSYS if
856 int vmw_kms_readback(struct vmw_private
*dev_priv
,
857 struct drm_file
*file_priv
,
858 struct vmw_framebuffer
*vfb
,
859 struct drm_vmw_fence_rep __user
*user_fence_rep
,
860 struct drm_vmw_rect
*vclips
,
863 switch (dev_priv
->active_display_unit
) {
864 case vmw_du_screen_object
:
865 return vmw_kms_sou_readback(dev_priv
, file_priv
, vfb
,
866 user_fence_rep
, vclips
, num_clips
,
868 case vmw_du_screen_target
:
869 return vmw_kms_stdu_dma(dev_priv
, file_priv
, vfb
,
870 user_fence_rep
, NULL
, vclips
, num_clips
,
871 1, false, true, NULL
);
874 "Readback called with invalid display system.\n");
881 static const struct drm_framebuffer_funcs vmw_framebuffer_surface_funcs
= {
882 .destroy
= vmw_framebuffer_surface_destroy
,
883 .dirty
= drm_atomic_helper_dirtyfb
,
886 static int vmw_kms_new_framebuffer_surface(struct vmw_private
*dev_priv
,
887 struct vmw_surface
*surface
,
888 struct vmw_framebuffer
**out
,
889 const struct drm_mode_fb_cmd2
894 struct drm_device
*dev
= dev_priv
->dev
;
895 struct vmw_framebuffer_surface
*vfbs
;
896 enum SVGA3dSurfaceFormat format
;
898 struct drm_format_name_buf format_name
;
900 /* 3D is only supported on HWv8 and newer hosts */
901 if (dev_priv
->active_display_unit
== vmw_du_legacy
)
908 /* Surface must be marked as a scanout. */
909 if (unlikely(!surface
->metadata
.scanout
))
912 if (unlikely(surface
->metadata
.mip_levels
[0] != 1 ||
913 surface
->metadata
.num_sizes
!= 1 ||
914 surface
->metadata
.base_size
.width
< mode_cmd
->width
||
915 surface
->metadata
.base_size
.height
< mode_cmd
->height
||
916 surface
->metadata
.base_size
.depth
!= 1)) {
917 DRM_ERROR("Incompatible surface dimensions "
918 "for requested mode.\n");
922 switch (mode_cmd
->pixel_format
) {
923 case DRM_FORMAT_ARGB8888
:
924 format
= SVGA3D_A8R8G8B8
;
926 case DRM_FORMAT_XRGB8888
:
927 format
= SVGA3D_X8R8G8B8
;
929 case DRM_FORMAT_RGB565
:
930 format
= SVGA3D_R5G6B5
;
932 case DRM_FORMAT_XRGB1555
:
933 format
= SVGA3D_A1R5G5B5
;
936 DRM_ERROR("Invalid pixel format: %s\n",
937 drm_get_format_name(mode_cmd
->pixel_format
, &format_name
));
942 * For DX, surface format validation is done when surface->scanout
945 if (!has_sm4_context(dev_priv
) && format
!= surface
->metadata
.format
) {
946 DRM_ERROR("Invalid surface format for requested mode.\n");
950 vfbs
= kzalloc(sizeof(*vfbs
), GFP_KERNEL
);
956 drm_helper_mode_fill_fb_struct(dev
, &vfbs
->base
.base
, mode_cmd
);
957 vfbs
->surface
= vmw_surface_reference(surface
);
958 vfbs
->base
.user_handle
= mode_cmd
->handles
[0];
959 vfbs
->is_bo_proxy
= is_bo_proxy
;
963 ret
= drm_framebuffer_init(dev
, &vfbs
->base
.base
,
964 &vmw_framebuffer_surface_funcs
);
971 vmw_surface_unreference(&surface
);
978 * Buffer-object framebuffer code
981 static void vmw_framebuffer_bo_destroy(struct drm_framebuffer
*framebuffer
)
983 struct vmw_framebuffer_bo
*vfbd
=
984 vmw_framebuffer_to_vfbd(framebuffer
);
986 drm_framebuffer_cleanup(framebuffer
);
987 vmw_bo_unreference(&vfbd
->buffer
);
988 if (vfbd
->base
.user_obj
)
989 ttm_base_object_unref(&vfbd
->base
.user_obj
);
994 static int vmw_framebuffer_bo_dirty(struct drm_framebuffer
*framebuffer
,
995 struct drm_file
*file_priv
,
996 unsigned int flags
, unsigned int color
,
997 struct drm_clip_rect
*clips
,
998 unsigned int num_clips
)
1000 struct vmw_private
*dev_priv
= vmw_priv(framebuffer
->dev
);
1001 struct vmw_framebuffer_bo
*vfbd
=
1002 vmw_framebuffer_to_vfbd(framebuffer
);
1003 struct drm_clip_rect norect
;
1004 int ret
, increment
= 1;
1006 drm_modeset_lock_all(dev_priv
->dev
);
1008 ret
= ttm_read_lock(&dev_priv
->reservation_sem
, true);
1009 if (unlikely(ret
!= 0)) {
1010 drm_modeset_unlock_all(dev_priv
->dev
);
1017 norect
.x1
= norect
.y1
= 0;
1018 norect
.x2
= framebuffer
->width
;
1019 norect
.y2
= framebuffer
->height
;
1020 } else if (flags
& DRM_MODE_FB_DIRTY_ANNOTATE_COPY
) {
1025 switch (dev_priv
->active_display_unit
) {
1027 ret
= vmw_kms_ldu_do_bo_dirty(dev_priv
, &vfbd
->base
, 0, 0,
1028 clips
, num_clips
, increment
);
1032 WARN_ONCE(true, "Dirty called with invalid display system.\n");
1036 vmw_fifo_flush(dev_priv
, false);
1037 ttm_read_unlock(&dev_priv
->reservation_sem
);
1039 drm_modeset_unlock_all(dev_priv
->dev
);
1044 static int vmw_framebuffer_bo_dirty_ext(struct drm_framebuffer
*framebuffer
,
1045 struct drm_file
*file_priv
,
1046 unsigned int flags
, unsigned int color
,
1047 struct drm_clip_rect
*clips
,
1048 unsigned int num_clips
)
1050 struct vmw_private
*dev_priv
= vmw_priv(framebuffer
->dev
);
1052 if (dev_priv
->active_display_unit
== vmw_du_legacy
)
1053 return vmw_framebuffer_bo_dirty(framebuffer
, file_priv
, flags
,
1054 color
, clips
, num_clips
);
1056 return drm_atomic_helper_dirtyfb(framebuffer
, file_priv
, flags
, color
,
1060 static const struct drm_framebuffer_funcs vmw_framebuffer_bo_funcs
= {
1061 .destroy
= vmw_framebuffer_bo_destroy
,
1062 .dirty
= vmw_framebuffer_bo_dirty_ext
,
1066 * Pin the bofer in a location suitable for access by the
1069 static int vmw_framebuffer_pin(struct vmw_framebuffer
*vfb
)
1071 struct vmw_private
*dev_priv
= vmw_priv(vfb
->base
.dev
);
1072 struct vmw_buffer_object
*buf
;
1073 struct ttm_placement
*placement
;
1076 buf
= vfb
->bo
? vmw_framebuffer_to_vfbd(&vfb
->base
)->buffer
:
1077 vmw_framebuffer_to_vfbs(&vfb
->base
)->surface
->res
.backup
;
1082 switch (dev_priv
->active_display_unit
) {
1084 vmw_overlay_pause_all(dev_priv
);
1085 ret
= vmw_bo_pin_in_start_of_vram(dev_priv
, buf
, false);
1086 vmw_overlay_resume_all(dev_priv
);
1088 case vmw_du_screen_object
:
1089 case vmw_du_screen_target
:
1091 if (dev_priv
->capabilities
& SVGA_CAP_3D
) {
1093 * Use surface DMA to get content to
1094 * sreen target surface.
1096 placement
= &vmw_vram_gmr_placement
;
1099 placement
= &vmw_sys_placement
;
1102 /* Use surface / image update */
1103 placement
= &vmw_mob_placement
;
1106 return vmw_bo_pin_in_placement(dev_priv
, buf
, placement
, false);
1114 static int vmw_framebuffer_unpin(struct vmw_framebuffer
*vfb
)
1116 struct vmw_private
*dev_priv
= vmw_priv(vfb
->base
.dev
);
1117 struct vmw_buffer_object
*buf
;
1119 buf
= vfb
->bo
? vmw_framebuffer_to_vfbd(&vfb
->base
)->buffer
:
1120 vmw_framebuffer_to_vfbs(&vfb
->base
)->surface
->res
.backup
;
1125 return vmw_bo_unpin(dev_priv
, buf
, false);
1129 * vmw_create_bo_proxy - create a proxy surface for the buffer object
1132 * @mode_cmd: parameters for the new surface
1133 * @bo_mob: MOB backing the buffer object
1134 * @srf_out: newly created surface
1136 * When the content FB is a buffer object, we create a surface as a proxy to the
1137 * same buffer. This way we can do a surface copy rather than a surface DMA.
1138 * This is a more efficient approach
1141 * 0 on success, error code otherwise
1143 static int vmw_create_bo_proxy(struct drm_device
*dev
,
1144 const struct drm_mode_fb_cmd2
*mode_cmd
,
1145 struct vmw_buffer_object
*bo_mob
,
1146 struct vmw_surface
**srf_out
)
1148 struct vmw_surface_metadata metadata
= {0};
1150 struct vmw_resource
*res
;
1151 unsigned int bytes_pp
;
1152 struct drm_format_name_buf format_name
;
1155 switch (mode_cmd
->pixel_format
) {
1156 case DRM_FORMAT_ARGB8888
:
1157 case DRM_FORMAT_XRGB8888
:
1158 format
= SVGA3D_X8R8G8B8
;
1162 case DRM_FORMAT_RGB565
:
1163 case DRM_FORMAT_XRGB1555
:
1164 format
= SVGA3D_R5G6B5
;
1174 DRM_ERROR("Invalid framebuffer format %s\n",
1175 drm_get_format_name(mode_cmd
->pixel_format
, &format_name
));
1179 metadata
.format
= format
;
1180 metadata
.mip_levels
[0] = 1;
1181 metadata
.num_sizes
= 1;
1182 metadata
.base_size
.width
= mode_cmd
->pitches
[0] / bytes_pp
;
1183 metadata
.base_size
.height
= mode_cmd
->height
;
1184 metadata
.base_size
.depth
= 1;
1185 metadata
.scanout
= true;
1187 ret
= vmw_gb_surface_define(vmw_priv(dev
), 0, &metadata
, srf_out
);
1189 DRM_ERROR("Failed to allocate proxy content buffer\n");
1193 res
= &(*srf_out
)->res
;
1195 /* Reserve and switch the backing mob. */
1196 mutex_lock(&res
->dev_priv
->cmdbuf_mutex
);
1197 (void) vmw_resource_reserve(res
, false, true);
1198 vmw_bo_unreference(&res
->backup
);
1199 res
->backup
= vmw_bo_reference(bo_mob
);
1200 res
->backup_offset
= 0;
1201 vmw_resource_unreserve(res
, false, false, false, NULL
, 0);
1202 mutex_unlock(&res
->dev_priv
->cmdbuf_mutex
);
1209 static int vmw_kms_new_framebuffer_bo(struct vmw_private
*dev_priv
,
1210 struct vmw_buffer_object
*bo
,
1211 struct vmw_framebuffer
**out
,
1212 const struct drm_mode_fb_cmd2
1216 struct drm_device
*dev
= dev_priv
->dev
;
1217 struct vmw_framebuffer_bo
*vfbd
;
1218 unsigned int requested_size
;
1219 struct drm_format_name_buf format_name
;
1222 requested_size
= mode_cmd
->height
* mode_cmd
->pitches
[0];
1223 if (unlikely(requested_size
> bo
->base
.num_pages
* PAGE_SIZE
)) {
1224 DRM_ERROR("Screen buffer object size is too small "
1225 "for requested mode.\n");
1229 /* Limited framebuffer color depth support for screen objects */
1230 if (dev_priv
->active_display_unit
== vmw_du_screen_object
) {
1231 switch (mode_cmd
->pixel_format
) {
1232 case DRM_FORMAT_XRGB8888
:
1233 case DRM_FORMAT_ARGB8888
:
1235 case DRM_FORMAT_XRGB1555
:
1236 case DRM_FORMAT_RGB565
:
1239 DRM_ERROR("Invalid pixel format: %s\n",
1240 drm_get_format_name(mode_cmd
->pixel_format
, &format_name
));
1245 vfbd
= kzalloc(sizeof(*vfbd
), GFP_KERNEL
);
1251 drm_helper_mode_fill_fb_struct(dev
, &vfbd
->base
.base
, mode_cmd
);
1252 vfbd
->base
.bo
= true;
1253 vfbd
->buffer
= vmw_bo_reference(bo
);
1254 vfbd
->base
.user_handle
= mode_cmd
->handles
[0];
1257 ret
= drm_framebuffer_init(dev
, &vfbd
->base
.base
,
1258 &vmw_framebuffer_bo_funcs
);
1265 vmw_bo_unreference(&bo
);
1273 * vmw_kms_srf_ok - check if a surface can be created
1275 * @width: requested width
1276 * @height: requested height
1278 * Surfaces need to be less than texture size
1281 vmw_kms_srf_ok(struct vmw_private
*dev_priv
, uint32_t width
, uint32_t height
)
1283 if (width
> dev_priv
->texture_max_width
||
1284 height
> dev_priv
->texture_max_height
)
1291 * vmw_kms_new_framebuffer - Create a new framebuffer.
1293 * @dev_priv: Pointer to device private struct.
1294 * @bo: Pointer to buffer object to wrap the kms framebuffer around.
1295 * Either @bo or @surface must be NULL.
1296 * @surface: Pointer to a surface to wrap the kms framebuffer around.
1297 * Either @bo or @surface must be NULL.
1298 * @only_2d: No presents will occur to this buffer object based framebuffer.
1299 * This helps the code to do some important optimizations.
1300 * @mode_cmd: Frame-buffer metadata.
1302 struct vmw_framebuffer
*
1303 vmw_kms_new_framebuffer(struct vmw_private
*dev_priv
,
1304 struct vmw_buffer_object
*bo
,
1305 struct vmw_surface
*surface
,
1307 const struct drm_mode_fb_cmd2
*mode_cmd
)
1309 struct vmw_framebuffer
*vfb
= NULL
;
1310 bool is_bo_proxy
= false;
1314 * We cannot use the SurfaceDMA command in an non-accelerated VM,
1315 * therefore, wrap the buffer object in a surface so we can use the
1316 * SurfaceCopy command.
1318 if (vmw_kms_srf_ok(dev_priv
, mode_cmd
->width
, mode_cmd
->height
) &&
1320 mode_cmd
->width
> 64 && /* Don't create a proxy for cursor */
1321 dev_priv
->active_display_unit
== vmw_du_screen_target
) {
1322 ret
= vmw_create_bo_proxy(dev_priv
->dev
, mode_cmd
,
1325 return ERR_PTR(ret
);
1330 /* Create the new framebuffer depending one what we have */
1332 ret
= vmw_kms_new_framebuffer_surface(dev_priv
, surface
, &vfb
,
1337 * vmw_create_bo_proxy() adds a reference that is no longer
1341 vmw_surface_unreference(&surface
);
1343 ret
= vmw_kms_new_framebuffer_bo(dev_priv
, bo
, &vfb
,
1350 return ERR_PTR(ret
);
1352 vfb
->pin
= vmw_framebuffer_pin
;
1353 vfb
->unpin
= vmw_framebuffer_unpin
;
1359 * Generic Kernel modesetting functions
1362 static struct drm_framebuffer
*vmw_kms_fb_create(struct drm_device
*dev
,
1363 struct drm_file
*file_priv
,
1364 const struct drm_mode_fb_cmd2
*mode_cmd
)
1366 struct vmw_private
*dev_priv
= vmw_priv(dev
);
1367 struct ttm_object_file
*tfile
= vmw_fpriv(file_priv
)->tfile
;
1368 struct vmw_framebuffer
*vfb
= NULL
;
1369 struct vmw_surface
*surface
= NULL
;
1370 struct vmw_buffer_object
*bo
= NULL
;
1371 struct ttm_base_object
*user_obj
;
1375 * Take a reference on the user object of the resource
1376 * backing the kms fb. This ensures that user-space handle
1377 * lookups on that resource will always work as long as
1378 * it's registered with a kms framebuffer. This is important,
1379 * since vmw_execbuf_process identifies resources in the
1380 * command stream using user-space handles.
1383 user_obj
= ttm_base_object_lookup(tfile
, mode_cmd
->handles
[0]);
1384 if (unlikely(user_obj
== NULL
)) {
1385 DRM_ERROR("Could not locate requested kms frame buffer.\n");
1386 return ERR_PTR(-ENOENT
);
1390 * End conditioned code.
1393 /* returns either a bo or surface */
1394 ret
= vmw_user_lookup_handle(dev_priv
, tfile
,
1395 mode_cmd
->handles
[0],
1402 !vmw_kms_srf_ok(dev_priv
, mode_cmd
->width
, mode_cmd
->height
)) {
1403 DRM_ERROR("Surface size cannot exceed %dx%d",
1404 dev_priv
->texture_max_width
,
1405 dev_priv
->texture_max_height
);
1410 vfb
= vmw_kms_new_framebuffer(dev_priv
, bo
, surface
,
1411 !(dev_priv
->capabilities
& SVGA_CAP_3D
),
1419 /* vmw_user_lookup_handle takes one ref so does new_fb */
1421 vmw_bo_unreference(&bo
);
1423 vmw_surface_unreference(&surface
);
1426 DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret
);
1427 ttm_base_object_unref(&user_obj
);
1428 return ERR_PTR(ret
);
1430 vfb
->user_obj
= user_obj
;
1436 * vmw_kms_check_display_memory - Validates display memory required for a
1439 * @num_rects: number of drm_rect in rects
1440 * @rects: array of drm_rect representing the topology to validate indexed by
1444 * 0 on success otherwise negative error code
1446 static int vmw_kms_check_display_memory(struct drm_device
*dev
,
1448 struct drm_rect
*rects
)
1450 struct vmw_private
*dev_priv
= vmw_priv(dev
);
1451 struct drm_rect bounding_box
= {0};
1452 u64 total_pixels
= 0, pixel_mem
, bb_mem
;
1455 for (i
= 0; i
< num_rects
; i
++) {
1457 * For STDU only individual screen (screen target) is limited by
1458 * SCREENTARGET_MAX_WIDTH/HEIGHT registers.
1460 if (dev_priv
->active_display_unit
== vmw_du_screen_target
&&
1461 (drm_rect_width(&rects
[i
]) > dev_priv
->stdu_max_width
||
1462 drm_rect_height(&rects
[i
]) > dev_priv
->stdu_max_height
)) {
1463 VMW_DEBUG_KMS("Screen size not supported.\n");
1467 /* Bounding box upper left is at (0,0). */
1468 if (rects
[i
].x2
> bounding_box
.x2
)
1469 bounding_box
.x2
= rects
[i
].x2
;
1471 if (rects
[i
].y2
> bounding_box
.y2
)
1472 bounding_box
.y2
= rects
[i
].y2
;
1474 total_pixels
+= (u64
) drm_rect_width(&rects
[i
]) *
1475 (u64
) drm_rect_height(&rects
[i
]);
1478 /* Virtual svga device primary limits are always in 32-bpp. */
1479 pixel_mem
= total_pixels
* 4;
1482 * For HV10 and below prim_bb_mem is vram size. When
1483 * SVGA_REG_MAX_PRIMARY_BOUNDING_BOX_MEM is not present vram size is
1484 * limit on primary bounding box
1486 if (pixel_mem
> dev_priv
->prim_bb_mem
) {
1487 VMW_DEBUG_KMS("Combined output size too large.\n");
1491 /* SVGA_CAP_NO_BB_RESTRICTION is available for STDU only. */
1492 if (dev_priv
->active_display_unit
!= vmw_du_screen_target
||
1493 !(dev_priv
->capabilities
& SVGA_CAP_NO_BB_RESTRICTION
)) {
1494 bb_mem
= (u64
) bounding_box
.x2
* bounding_box
.y2
* 4;
1496 if (bb_mem
> dev_priv
->prim_bb_mem
) {
1497 VMW_DEBUG_KMS("Topology is beyond supported limits.\n");
1506 * vmw_crtc_state_and_lock - Return new or current crtc state with locked
1508 * @state: The atomic state pointer containing the new atomic state
1511 * This function returns the new crtc state if it's part of the state update.
1512 * Otherwise returns the current crtc state. It also makes sure that the
1513 * crtc mutex is locked.
1515 * Returns: A valid crtc state pointer or NULL. It may also return a
1516 * pointer error, in particular -EDEADLK if locking needs to be rerun.
1518 static struct drm_crtc_state
*
1519 vmw_crtc_state_and_lock(struct drm_atomic_state
*state
, struct drm_crtc
*crtc
)
1521 struct drm_crtc_state
*crtc_state
;
1523 crtc_state
= drm_atomic_get_new_crtc_state(state
, crtc
);
1525 lockdep_assert_held(&crtc
->mutex
.mutex
.base
);
1527 int ret
= drm_modeset_lock(&crtc
->mutex
, state
->acquire_ctx
);
1529 if (ret
!= 0 && ret
!= -EALREADY
)
1530 return ERR_PTR(ret
);
1532 crtc_state
= crtc
->state
;
1539 * vmw_kms_check_implicit - Verify that all implicit display units scan out
1540 * from the same fb after the new state is committed.
1541 * @dev: The drm_device.
1542 * @state: The new state to be checked.
1546 * -EINVAL on invalid state,
1547 * -EDEADLK if modeset locking needs to be rerun.
1549 static int vmw_kms_check_implicit(struct drm_device
*dev
,
1550 struct drm_atomic_state
*state
)
1552 struct drm_framebuffer
*implicit_fb
= NULL
;
1553 struct drm_crtc
*crtc
;
1554 struct drm_crtc_state
*crtc_state
;
1555 struct drm_plane_state
*plane_state
;
1557 drm_for_each_crtc(crtc
, dev
) {
1558 struct vmw_display_unit
*du
= vmw_crtc_to_du(crtc
);
1560 if (!du
->is_implicit
)
1563 crtc_state
= vmw_crtc_state_and_lock(state
, crtc
);
1564 if (IS_ERR(crtc_state
))
1565 return PTR_ERR(crtc_state
);
1567 if (!crtc_state
|| !crtc_state
->enable
)
1571 * Can't move primary planes across crtcs, so this is OK.
1572 * It also means we don't need to take the plane mutex.
1574 plane_state
= du
->primary
.state
;
1575 if (plane_state
->crtc
!= crtc
)
1579 implicit_fb
= plane_state
->fb
;
1580 else if (implicit_fb
!= plane_state
->fb
)
1588 * vmw_kms_check_topology - Validates topology in drm_atomic_state
1590 * @state: the driver state object
1593 * 0 on success otherwise negative error code
1595 static int vmw_kms_check_topology(struct drm_device
*dev
,
1596 struct drm_atomic_state
*state
)
1598 struct drm_crtc_state
*old_crtc_state
, *new_crtc_state
;
1599 struct drm_rect
*rects
;
1600 struct drm_crtc
*crtc
;
1604 rects
= kcalloc(dev
->mode_config
.num_crtc
, sizeof(struct drm_rect
),
1609 drm_for_each_crtc(crtc
, dev
) {
1610 struct vmw_display_unit
*du
= vmw_crtc_to_du(crtc
);
1611 struct drm_crtc_state
*crtc_state
;
1613 i
= drm_crtc_index(crtc
);
1615 crtc_state
= vmw_crtc_state_and_lock(state
, crtc
);
1616 if (IS_ERR(crtc_state
)) {
1617 ret
= PTR_ERR(crtc_state
);
1624 if (crtc_state
->enable
) {
1625 rects
[i
].x1
= du
->gui_x
;
1626 rects
[i
].y1
= du
->gui_y
;
1627 rects
[i
].x2
= du
->gui_x
+ crtc_state
->mode
.hdisplay
;
1628 rects
[i
].y2
= du
->gui_y
+ crtc_state
->mode
.vdisplay
;
1637 /* Determine change to topology due to new atomic state */
1638 for_each_oldnew_crtc_in_state(state
, crtc
, old_crtc_state
,
1639 new_crtc_state
, i
) {
1640 struct vmw_display_unit
*du
= vmw_crtc_to_du(crtc
);
1641 struct drm_connector
*connector
;
1642 struct drm_connector_state
*conn_state
;
1643 struct vmw_connector_state
*vmw_conn_state
;
1645 if (!du
->pref_active
&& new_crtc_state
->enable
) {
1646 VMW_DEBUG_KMS("Enabling a disabled display unit\n");
1652 * For vmwgfx each crtc has only one connector attached and it
1653 * is not changed so don't really need to check the
1654 * crtc->connector_mask and iterate over it.
1656 connector
= &du
->connector
;
1657 conn_state
= drm_atomic_get_connector_state(state
, connector
);
1658 if (IS_ERR(conn_state
)) {
1659 ret
= PTR_ERR(conn_state
);
1663 vmw_conn_state
= vmw_connector_state_to_vcs(conn_state
);
1664 vmw_conn_state
->gui_x
= du
->gui_x
;
1665 vmw_conn_state
->gui_y
= du
->gui_y
;
1668 ret
= vmw_kms_check_display_memory(dev
, dev
->mode_config
.num_crtc
,
1677 * vmw_kms_atomic_check_modeset- validate state object for modeset changes
1680 * @state: the driver state object
1682 * This is a simple wrapper around drm_atomic_helper_check_modeset() for
1683 * us to assign a value to mode->crtc_clock so that
1684 * drm_calc_timestamping_constants() won't throw an error message
1687 * Zero for success or -errno
1690 vmw_kms_atomic_check_modeset(struct drm_device
*dev
,
1691 struct drm_atomic_state
*state
)
1693 struct drm_crtc
*crtc
;
1694 struct drm_crtc_state
*crtc_state
;
1695 bool need_modeset
= false;
1698 ret
= drm_atomic_helper_check(dev
, state
);
1702 ret
= vmw_kms_check_implicit(dev
, state
);
1704 VMW_DEBUG_KMS("Invalid implicit state\n");
1708 for_each_new_crtc_in_state(state
, crtc
, crtc_state
, i
) {
1709 if (drm_atomic_crtc_needs_modeset(crtc_state
))
1710 need_modeset
= true;
1714 return vmw_kms_check_topology(dev
, state
);
1719 static const struct drm_mode_config_funcs vmw_kms_funcs
= {
1720 .fb_create
= vmw_kms_fb_create
,
1721 .atomic_check
= vmw_kms_atomic_check_modeset
,
1722 .atomic_commit
= drm_atomic_helper_commit
,
1725 static int vmw_kms_generic_present(struct vmw_private
*dev_priv
,
1726 struct drm_file
*file_priv
,
1727 struct vmw_framebuffer
*vfb
,
1728 struct vmw_surface
*surface
,
1730 int32_t destX
, int32_t destY
,
1731 struct drm_vmw_rect
*clips
,
1734 return vmw_kms_sou_do_surface_dirty(dev_priv
, vfb
, NULL
, clips
,
1735 &surface
->res
, destX
, destY
,
1736 num_clips
, 1, NULL
, NULL
);
1740 int vmw_kms_present(struct vmw_private
*dev_priv
,
1741 struct drm_file
*file_priv
,
1742 struct vmw_framebuffer
*vfb
,
1743 struct vmw_surface
*surface
,
1745 int32_t destX
, int32_t destY
,
1746 struct drm_vmw_rect
*clips
,
1751 switch (dev_priv
->active_display_unit
) {
1752 case vmw_du_screen_target
:
1753 ret
= vmw_kms_stdu_surface_dirty(dev_priv
, vfb
, NULL
, clips
,
1754 &surface
->res
, destX
, destY
,
1755 num_clips
, 1, NULL
, NULL
);
1757 case vmw_du_screen_object
:
1758 ret
= vmw_kms_generic_present(dev_priv
, file_priv
, vfb
, surface
,
1759 sid
, destX
, destY
, clips
,
1764 "Present called with invalid display system.\n");
1771 vmw_fifo_flush(dev_priv
, false);
1777 vmw_kms_create_hotplug_mode_update_property(struct vmw_private
*dev_priv
)
1779 if (dev_priv
->hotplug_mode_update_property
)
1782 dev_priv
->hotplug_mode_update_property
=
1783 drm_property_create_range(dev_priv
->dev
,
1784 DRM_MODE_PROP_IMMUTABLE
,
1785 "hotplug_mode_update", 0, 1);
1787 if (!dev_priv
->hotplug_mode_update_property
)
1792 int vmw_kms_init(struct vmw_private
*dev_priv
)
1794 struct drm_device
*dev
= dev_priv
->dev
;
1797 drm_mode_config_init(dev
);
1798 dev
->mode_config
.funcs
= &vmw_kms_funcs
;
1799 dev
->mode_config
.min_width
= 1;
1800 dev
->mode_config
.min_height
= 1;
1801 dev
->mode_config
.max_width
= dev_priv
->texture_max_width
;
1802 dev
->mode_config
.max_height
= dev_priv
->texture_max_height
;
1804 drm_mode_create_suggested_offset_properties(dev
);
1805 vmw_kms_create_hotplug_mode_update_property(dev_priv
);
1807 ret
= vmw_kms_stdu_init_display(dev_priv
);
1809 ret
= vmw_kms_sou_init_display(dev_priv
);
1810 if (ret
) /* Fallback */
1811 ret
= vmw_kms_ldu_init_display(dev_priv
);
1817 int vmw_kms_close(struct vmw_private
*dev_priv
)
1822 * Docs says we should take the lock before calling this function
1823 * but since it destroys encoders and our destructor calls
1824 * drm_encoder_cleanup which takes the lock we deadlock.
1826 drm_mode_config_cleanup(dev_priv
->dev
);
1827 if (dev_priv
->active_display_unit
== vmw_du_legacy
)
1828 ret
= vmw_kms_ldu_close_display(dev_priv
);
1833 int vmw_kms_cursor_bypass_ioctl(struct drm_device
*dev
, void *data
,
1834 struct drm_file
*file_priv
)
1836 struct drm_vmw_cursor_bypass_arg
*arg
= data
;
1837 struct vmw_display_unit
*du
;
1838 struct drm_crtc
*crtc
;
1842 mutex_lock(&dev
->mode_config
.mutex
);
1843 if (arg
->flags
& DRM_VMW_CURSOR_BYPASS_ALL
) {
1845 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
1846 du
= vmw_crtc_to_du(crtc
);
1847 du
->hotspot_x
= arg
->xhot
;
1848 du
->hotspot_y
= arg
->yhot
;
1851 mutex_unlock(&dev
->mode_config
.mutex
);
1855 crtc
= drm_crtc_find(dev
, file_priv
, arg
->crtc_id
);
1861 du
= vmw_crtc_to_du(crtc
);
1863 du
->hotspot_x
= arg
->xhot
;
1864 du
->hotspot_y
= arg
->yhot
;
1867 mutex_unlock(&dev
->mode_config
.mutex
);
1872 int vmw_kms_write_svga(struct vmw_private
*vmw_priv
,
1873 unsigned width
, unsigned height
, unsigned pitch
,
1874 unsigned bpp
, unsigned depth
)
1876 if (vmw_priv
->capabilities
& SVGA_CAP_PITCHLOCK
)
1877 vmw_write(vmw_priv
, SVGA_REG_PITCHLOCK
, pitch
);
1878 else if (vmw_fifo_have_pitchlock(vmw_priv
))
1879 vmw_mmio_write(pitch
, vmw_priv
->mmio_virt
+
1880 SVGA_FIFO_PITCHLOCK
);
1881 vmw_write(vmw_priv
, SVGA_REG_WIDTH
, width
);
1882 vmw_write(vmw_priv
, SVGA_REG_HEIGHT
, height
);
1883 vmw_write(vmw_priv
, SVGA_REG_BITS_PER_PIXEL
, bpp
);
1885 if (vmw_read(vmw_priv
, SVGA_REG_DEPTH
) != depth
) {
1886 DRM_ERROR("Invalid depth %u for %u bpp, host expects %u\n",
1887 depth
, bpp
, vmw_read(vmw_priv
, SVGA_REG_DEPTH
));
1894 bool vmw_kms_validate_mode_vram(struct vmw_private
*dev_priv
,
1898 return ((u64
) pitch
* (u64
) height
) < (u64
)
1899 ((dev_priv
->active_display_unit
== vmw_du_screen_target
) ?
1900 dev_priv
->prim_bb_mem
: dev_priv
->vram_size
);
1905 * Function called by DRM code called with vbl_lock held.
1907 u32
vmw_get_vblank_counter(struct drm_crtc
*crtc
)
1913 * Function called by DRM code called with vbl_lock held.
1915 int vmw_enable_vblank(struct drm_crtc
*crtc
)
1921 * Function called by DRM code called with vbl_lock held.
1923 void vmw_disable_vblank(struct drm_crtc
*crtc
)
1928 * vmw_du_update_layout - Update the display unit with topology from resolution
1929 * plugin and generate DRM uevent
1930 * @dev_priv: device private
1931 * @num_rects: number of drm_rect in rects
1932 * @rects: toplogy to update
1934 static int vmw_du_update_layout(struct vmw_private
*dev_priv
,
1935 unsigned int num_rects
, struct drm_rect
*rects
)
1937 struct drm_device
*dev
= dev_priv
->dev
;
1938 struct vmw_display_unit
*du
;
1939 struct drm_connector
*con
;
1940 struct drm_connector_list_iter conn_iter
;
1941 struct drm_modeset_acquire_ctx ctx
;
1942 struct drm_crtc
*crtc
;
1945 /* Currently gui_x/y is protected with the crtc mutex */
1946 mutex_lock(&dev
->mode_config
.mutex
);
1947 drm_modeset_acquire_init(&ctx
, 0);
1949 drm_for_each_crtc(crtc
, dev
) {
1950 ret
= drm_modeset_lock(&crtc
->mutex
, &ctx
);
1952 if (ret
== -EDEADLK
) {
1953 drm_modeset_backoff(&ctx
);
1960 drm_connector_list_iter_begin(dev
, &conn_iter
);
1961 drm_for_each_connector_iter(con
, &conn_iter
) {
1962 du
= vmw_connector_to_du(con
);
1963 if (num_rects
> du
->unit
) {
1964 du
->pref_width
= drm_rect_width(&rects
[du
->unit
]);
1965 du
->pref_height
= drm_rect_height(&rects
[du
->unit
]);
1966 du
->pref_active
= true;
1967 du
->gui_x
= rects
[du
->unit
].x1
;
1968 du
->gui_y
= rects
[du
->unit
].y1
;
1970 du
->pref_width
= 800;
1971 du
->pref_height
= 600;
1972 du
->pref_active
= false;
1977 drm_connector_list_iter_end(&conn_iter
);
1979 list_for_each_entry(con
, &dev
->mode_config
.connector_list
, head
) {
1980 du
= vmw_connector_to_du(con
);
1981 if (num_rects
> du
->unit
) {
1982 drm_object_property_set_value
1983 (&con
->base
, dev
->mode_config
.suggested_x_property
,
1985 drm_object_property_set_value
1986 (&con
->base
, dev
->mode_config
.suggested_y_property
,
1989 drm_object_property_set_value
1990 (&con
->base
, dev
->mode_config
.suggested_x_property
,
1992 drm_object_property_set_value
1993 (&con
->base
, dev
->mode_config
.suggested_y_property
,
1996 con
->status
= vmw_du_connector_detect(con
, true);
1999 drm_sysfs_hotplug_event(dev
);
2001 drm_modeset_drop_locks(&ctx
);
2002 drm_modeset_acquire_fini(&ctx
);
2003 mutex_unlock(&dev
->mode_config
.mutex
);
2008 int vmw_du_crtc_gamma_set(struct drm_crtc
*crtc
,
2009 u16
*r
, u16
*g
, u16
*b
,
2011 struct drm_modeset_acquire_ctx
*ctx
)
2013 struct vmw_private
*dev_priv
= vmw_priv(crtc
->dev
);
2016 for (i
= 0; i
< size
; i
++) {
2017 DRM_DEBUG("%d r/g/b = 0x%04x / 0x%04x / 0x%04x\n", i
,
2019 vmw_write(dev_priv
, SVGA_PALETTE_BASE
+ i
* 3 + 0, r
[i
] >> 8);
2020 vmw_write(dev_priv
, SVGA_PALETTE_BASE
+ i
* 3 + 1, g
[i
] >> 8);
2021 vmw_write(dev_priv
, SVGA_PALETTE_BASE
+ i
* 3 + 2, b
[i
] >> 8);
2027 int vmw_du_connector_dpms(struct drm_connector
*connector
, int mode
)
2032 enum drm_connector_status
2033 vmw_du_connector_detect(struct drm_connector
*connector
, bool force
)
2035 uint32_t num_displays
;
2036 struct drm_device
*dev
= connector
->dev
;
2037 struct vmw_private
*dev_priv
= vmw_priv(dev
);
2038 struct vmw_display_unit
*du
= vmw_connector_to_du(connector
);
2040 num_displays
= vmw_read(dev_priv
, SVGA_REG_NUM_DISPLAYS
);
2042 return ((vmw_connector_to_du(connector
)->unit
< num_displays
&&
2044 connector_status_connected
: connector_status_disconnected
);
2047 static struct drm_display_mode vmw_kms_connector_builtin
[] = {
2049 { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER
, 25175, 640, 656,
2050 752, 800, 0, 480, 489, 492, 525, 0,
2051 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_NVSYNC
) },
2053 { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER
, 40000, 800, 840,
2054 968, 1056, 0, 600, 601, 605, 628, 0,
2055 DRM_MODE_FLAG_PHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2057 { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER
, 65000, 1024, 1048,
2058 1184, 1344, 0, 768, 771, 777, 806, 0,
2059 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_NVSYNC
) },
2061 { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER
, 108000, 1152, 1216,
2062 1344, 1600, 0, 864, 865, 868, 900, 0,
2063 DRM_MODE_FLAG_PHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2065 { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER
, 79500, 1280, 1344,
2066 1472, 1664, 0, 768, 771, 778, 798, 0,
2067 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2069 { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER
, 83500, 1280, 1352,
2070 1480, 1680, 0, 800, 803, 809, 831, 0,
2071 DRM_MODE_FLAG_PHSYNC
| DRM_MODE_FLAG_NVSYNC
) },
2073 { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER
, 108000, 1280, 1376,
2074 1488, 1800, 0, 960, 961, 964, 1000, 0,
2075 DRM_MODE_FLAG_PHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2076 /* 1280x1024@60Hz */
2077 { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER
, 108000, 1280, 1328,
2078 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
2079 DRM_MODE_FLAG_PHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2081 { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER
, 85500, 1360, 1424,
2082 1536, 1792, 0, 768, 771, 777, 795, 0,
2083 DRM_MODE_FLAG_PHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2084 /* 1440x1050@60Hz */
2085 { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER
, 121750, 1400, 1488,
2086 1632, 1864, 0, 1050, 1053, 1057, 1089, 0,
2087 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2089 { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER
, 106500, 1440, 1520,
2090 1672, 1904, 0, 900, 903, 909, 934, 0,
2091 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2092 /* 1600x1200@60Hz */
2093 { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER
, 162000, 1600, 1664,
2094 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
2095 DRM_MODE_FLAG_PHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2096 /* 1680x1050@60Hz */
2097 { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER
, 146250, 1680, 1784,
2098 1960, 2240, 0, 1050, 1053, 1059, 1089, 0,
2099 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2100 /* 1792x1344@60Hz */
2101 { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER
, 204750, 1792, 1920,
2102 2120, 2448, 0, 1344, 1345, 1348, 1394, 0,
2103 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2104 /* 1853x1392@60Hz */
2105 { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER
, 218250, 1856, 1952,
2106 2176, 2528, 0, 1392, 1393, 1396, 1439, 0,
2107 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2108 /* 1920x1200@60Hz */
2109 { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER
, 193250, 1920, 2056,
2110 2256, 2592, 0, 1200, 1203, 1209, 1245, 0,
2111 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2112 /* 1920x1440@60Hz */
2113 { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER
, 234000, 1920, 2048,
2114 2256, 2600, 0, 1440, 1441, 1444, 1500, 0,
2115 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2116 /* 2560x1600@60Hz */
2117 { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER
, 348500, 2560, 2752,
2118 3032, 3504, 0, 1600, 1603, 1609, 1658, 0,
2119 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
) },
2121 { DRM_MODE("", 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) },
2125 * vmw_guess_mode_timing - Provide fake timings for a
2126 * 60Hz vrefresh mode.
2128 * @mode - Pointer to a struct drm_display_mode with hdisplay and vdisplay
2129 * members filled in.
2131 void vmw_guess_mode_timing(struct drm_display_mode
*mode
)
2133 mode
->hsync_start
= mode
->hdisplay
+ 50;
2134 mode
->hsync_end
= mode
->hsync_start
+ 50;
2135 mode
->htotal
= mode
->hsync_end
+ 50;
2137 mode
->vsync_start
= mode
->vdisplay
+ 50;
2138 mode
->vsync_end
= mode
->vsync_start
+ 50;
2139 mode
->vtotal
= mode
->vsync_end
+ 50;
2141 mode
->clock
= (u32
)mode
->htotal
* (u32
)mode
->vtotal
/ 100 * 6;
2145 int vmw_du_connector_fill_modes(struct drm_connector
*connector
,
2146 uint32_t max_width
, uint32_t max_height
)
2148 struct vmw_display_unit
*du
= vmw_connector_to_du(connector
);
2149 struct drm_device
*dev
= connector
->dev
;
2150 struct vmw_private
*dev_priv
= vmw_priv(dev
);
2151 struct drm_display_mode
*mode
= NULL
;
2152 struct drm_display_mode
*bmode
;
2153 struct drm_display_mode prefmode
= { DRM_MODE("preferred",
2154 DRM_MODE_TYPE_DRIVER
| DRM_MODE_TYPE_PREFERRED
,
2155 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
2156 DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_PVSYNC
)
2159 u32 assumed_bpp
= 4;
2161 if (dev_priv
->assume_16bpp
)
2164 max_width
= min(max_width
, dev_priv
->texture_max_width
);
2165 max_height
= min(max_height
, dev_priv
->texture_max_height
);
2168 * For STDU extra limit for a mode on SVGA_REG_SCREENTARGET_MAX_WIDTH/
2171 if (dev_priv
->active_display_unit
== vmw_du_screen_target
) {
2172 max_width
= min(max_width
, dev_priv
->stdu_max_width
);
2173 max_height
= min(max_height
, dev_priv
->stdu_max_height
);
2176 /* Add preferred mode */
2177 mode
= drm_mode_duplicate(dev
, &prefmode
);
2180 mode
->hdisplay
= du
->pref_width
;
2181 mode
->vdisplay
= du
->pref_height
;
2182 vmw_guess_mode_timing(mode
);
2184 if (vmw_kms_validate_mode_vram(dev_priv
,
2185 mode
->hdisplay
* assumed_bpp
,
2187 drm_mode_probed_add(connector
, mode
);
2189 drm_mode_destroy(dev
, mode
);
2193 if (du
->pref_mode
) {
2194 list_del_init(&du
->pref_mode
->head
);
2195 drm_mode_destroy(dev
, du
->pref_mode
);
2198 /* mode might be null here, this is intended */
2199 du
->pref_mode
= mode
;
2201 for (i
= 0; vmw_kms_connector_builtin
[i
].type
!= 0; i
++) {
2202 bmode
= &vmw_kms_connector_builtin
[i
];
2203 if (bmode
->hdisplay
> max_width
||
2204 bmode
->vdisplay
> max_height
)
2207 if (!vmw_kms_validate_mode_vram(dev_priv
,
2208 bmode
->hdisplay
* assumed_bpp
,
2212 mode
= drm_mode_duplicate(dev
, bmode
);
2216 drm_mode_probed_add(connector
, mode
);
2219 drm_connector_list_update(connector
);
2220 /* Move the prefered mode first, help apps pick the right mode. */
2221 drm_mode_sort(&connector
->modes
);
2227 * vmw_kms_update_layout_ioctl - Handler for DRM_VMW_UPDATE_LAYOUT ioctl
2228 * @dev: drm device for the ioctl
2229 * @data: data pointer for the ioctl
2230 * @file_priv: drm file for the ioctl call
2232 * Update preferred topology of display unit as per ioctl request. The topology
2233 * is expressed as array of drm_vmw_rect.
2235 * [0 0 640 480] [640 0 800 600] [0 480 640 480]
2238 * The x and y offset (upper left) in drm_vmw_rect cannot be less than 0. Beside
2239 * device limit on topology, x + w and y + h (lower right) cannot be greater
2240 * than INT_MAX. So topology beyond these limits will return with error.
2243 * Zero on success, negative errno on failure.
2245 int vmw_kms_update_layout_ioctl(struct drm_device
*dev
, void *data
,
2246 struct drm_file
*file_priv
)
2248 struct vmw_private
*dev_priv
= vmw_priv(dev
);
2249 struct drm_mode_config
*mode_config
= &dev
->mode_config
;
2250 struct drm_vmw_update_layout_arg
*arg
=
2251 (struct drm_vmw_update_layout_arg
*)data
;
2252 void __user
*user_rects
;
2253 struct drm_vmw_rect
*rects
;
2254 struct drm_rect
*drm_rects
;
2255 unsigned rects_size
;
2258 if (!arg
->num_outputs
) {
2259 struct drm_rect def_rect
= {0, 0, 800, 600};
2260 VMW_DEBUG_KMS("Default layout x1 = %d y1 = %d x2 = %d y2 = %d\n",
2261 def_rect
.x1
, def_rect
.y1
,
2262 def_rect
.x2
, def_rect
.y2
);
2263 vmw_du_update_layout(dev_priv
, 1, &def_rect
);
2267 rects_size
= arg
->num_outputs
* sizeof(struct drm_vmw_rect
);
2268 rects
= kcalloc(arg
->num_outputs
, sizeof(struct drm_vmw_rect
),
2270 if (unlikely(!rects
))
2273 user_rects
= (void __user
*)(unsigned long)arg
->rects
;
2274 ret
= copy_from_user(rects
, user_rects
, rects_size
);
2275 if (unlikely(ret
!= 0)) {
2276 DRM_ERROR("Failed to get rects.\n");
2281 drm_rects
= (struct drm_rect
*)rects
;
2283 VMW_DEBUG_KMS("Layout count = %u\n", arg
->num_outputs
);
2284 for (i
= 0; i
< arg
->num_outputs
; i
++) {
2285 struct drm_vmw_rect curr_rect
;
2287 /* Verify user-space for overflow as kernel use drm_rect */
2288 if ((rects
[i
].x
+ rects
[i
].w
> INT_MAX
) ||
2289 (rects
[i
].y
+ rects
[i
].h
> INT_MAX
)) {
2294 curr_rect
= rects
[i
];
2295 drm_rects
[i
].x1
= curr_rect
.x
;
2296 drm_rects
[i
].y1
= curr_rect
.y
;
2297 drm_rects
[i
].x2
= curr_rect
.x
+ curr_rect
.w
;
2298 drm_rects
[i
].y2
= curr_rect
.y
+ curr_rect
.h
;
2300 VMW_DEBUG_KMS(" x1 = %d y1 = %d x2 = %d y2 = %d\n",
2301 drm_rects
[i
].x1
, drm_rects
[i
].y1
,
2302 drm_rects
[i
].x2
, drm_rects
[i
].y2
);
2305 * Currently this check is limiting the topology within
2306 * mode_config->max (which actually is max texture size
2307 * supported by virtual device). This limit is here to address
2308 * window managers that create a big framebuffer for whole
2311 if (drm_rects
[i
].x1
< 0 || drm_rects
[i
].y1
< 0 ||
2312 drm_rects
[i
].x2
> mode_config
->max_width
||
2313 drm_rects
[i
].y2
> mode_config
->max_height
) {
2314 VMW_DEBUG_KMS("Invalid layout %d %d %d %d\n",
2315 drm_rects
[i
].x1
, drm_rects
[i
].y1
,
2316 drm_rects
[i
].x2
, drm_rects
[i
].y2
);
2322 ret
= vmw_kms_check_display_memory(dev
, arg
->num_outputs
, drm_rects
);
2325 vmw_du_update_layout(dev_priv
, arg
->num_outputs
, drm_rects
);
2333 * vmw_kms_helper_dirty - Helper to build commands and perform actions based
2334 * on a set of cliprects and a set of display units.
2336 * @dev_priv: Pointer to a device private structure.
2337 * @framebuffer: Pointer to the framebuffer on which to perform the actions.
2338 * @clips: A set of struct drm_clip_rect. Either this os @vclips must be NULL.
2339 * Cliprects are given in framebuffer coordinates.
2340 * @vclips: A set of struct drm_vmw_rect cliprects. Either this or @clips must
2341 * be NULL. Cliprects are given in source coordinates.
2342 * @dest_x: X coordinate offset for the crtc / destination clip rects.
2343 * @dest_y: Y coordinate offset for the crtc / destination clip rects.
2344 * @num_clips: Number of cliprects in the @clips or @vclips array.
2345 * @increment: Integer with which to increment the clip counter when looping.
2346 * Used to skip a predetermined number of clip rects.
2347 * @dirty: Closure structure. See the description of struct vmw_kms_dirty.
2349 int vmw_kms_helper_dirty(struct vmw_private
*dev_priv
,
2350 struct vmw_framebuffer
*framebuffer
,
2351 const struct drm_clip_rect
*clips
,
2352 const struct drm_vmw_rect
*vclips
,
2353 s32 dest_x
, s32 dest_y
,
2356 struct vmw_kms_dirty
*dirty
)
2358 struct vmw_display_unit
*units
[VMWGFX_NUM_DISPLAY_UNITS
];
2359 struct drm_crtc
*crtc
;
2363 dirty
->dev_priv
= dev_priv
;
2365 /* If crtc is passed, no need to iterate over other display units */
2367 units
[num_units
++] = vmw_crtc_to_du(dirty
->crtc
);
2369 list_for_each_entry(crtc
, &dev_priv
->dev
->mode_config
.crtc_list
,
2371 struct drm_plane
*plane
= crtc
->primary
;
2373 if (plane
->state
->fb
== &framebuffer
->base
)
2374 units
[num_units
++] = vmw_crtc_to_du(crtc
);
2378 for (k
= 0; k
< num_units
; k
++) {
2379 struct vmw_display_unit
*unit
= units
[k
];
2380 s32 crtc_x
= unit
->crtc
.x
;
2381 s32 crtc_y
= unit
->crtc
.y
;
2382 s32 crtc_width
= unit
->crtc
.mode
.hdisplay
;
2383 s32 crtc_height
= unit
->crtc
.mode
.vdisplay
;
2384 const struct drm_clip_rect
*clips_ptr
= clips
;
2385 const struct drm_vmw_rect
*vclips_ptr
= vclips
;
2388 if (dirty
->fifo_reserve_size
> 0) {
2389 dirty
->cmd
= VMW_FIFO_RESERVE(dev_priv
,
2390 dirty
->fifo_reserve_size
);
2394 memset(dirty
->cmd
, 0, dirty
->fifo_reserve_size
);
2396 dirty
->num_hits
= 0;
2397 for (i
= 0; i
< num_clips
; i
++, clips_ptr
+= increment
,
2398 vclips_ptr
+= increment
) {
2403 * Select clip array type. Note that integer type
2404 * in @clips is unsigned short, whereas in @vclips
2408 dirty
->fb_x
= (s32
) clips_ptr
->x1
;
2409 dirty
->fb_y
= (s32
) clips_ptr
->y1
;
2410 dirty
->unit_x2
= (s32
) clips_ptr
->x2
+ dest_x
-
2412 dirty
->unit_y2
= (s32
) clips_ptr
->y2
+ dest_y
-
2415 dirty
->fb_x
= vclips_ptr
->x
;
2416 dirty
->fb_y
= vclips_ptr
->y
;
2417 dirty
->unit_x2
= dirty
->fb_x
+ vclips_ptr
->w
+
2419 dirty
->unit_y2
= dirty
->fb_y
+ vclips_ptr
->h
+
2423 dirty
->unit_x1
= dirty
->fb_x
+ dest_x
- crtc_x
;
2424 dirty
->unit_y1
= dirty
->fb_y
+ dest_y
- crtc_y
;
2426 /* Skip this clip if it's outside the crtc region */
2427 if (dirty
->unit_x1
>= crtc_width
||
2428 dirty
->unit_y1
>= crtc_height
||
2429 dirty
->unit_x2
<= 0 || dirty
->unit_y2
<= 0)
2432 /* Clip right and bottom to crtc limits */
2433 dirty
->unit_x2
= min_t(s32
, dirty
->unit_x2
,
2435 dirty
->unit_y2
= min_t(s32
, dirty
->unit_y2
,
2438 /* Clip left and top to crtc limits */
2439 clip_left
= min_t(s32
, dirty
->unit_x1
, 0);
2440 clip_top
= min_t(s32
, dirty
->unit_y1
, 0);
2441 dirty
->unit_x1
-= clip_left
;
2442 dirty
->unit_y1
-= clip_top
;
2443 dirty
->fb_x
-= clip_left
;
2444 dirty
->fb_y
-= clip_top
;
2449 dirty
->fifo_commit(dirty
);
2456 * vmw_kms_helper_validation_finish - Helper for post KMS command submission
2457 * cleanup and fencing
2458 * @dev_priv: Pointer to the device-private struct
2459 * @file_priv: Pointer identifying the client when user-space fencing is used
2460 * @ctx: Pointer to the validation context
2461 * @out_fence: If non-NULL, returned refcounted fence-pointer
2462 * @user_fence_rep: If non-NULL, pointer to user-space address area
2463 * in which to copy user-space fence info
2465 void vmw_kms_helper_validation_finish(struct vmw_private
*dev_priv
,
2466 struct drm_file
*file_priv
,
2467 struct vmw_validation_context
*ctx
,
2468 struct vmw_fence_obj
**out_fence
,
2469 struct drm_vmw_fence_rep __user
*
2472 struct vmw_fence_obj
*fence
= NULL
;
2473 uint32_t handle
= 0;
2476 if (file_priv
|| user_fence_rep
|| vmw_validation_has_bos(ctx
) ||
2478 ret
= vmw_execbuf_fence_commands(file_priv
, dev_priv
, &fence
,
2479 file_priv
? &handle
: NULL
);
2480 vmw_validation_done(ctx
, fence
);
2482 vmw_execbuf_copy_fence_user(dev_priv
, vmw_fpriv(file_priv
),
2483 ret
, user_fence_rep
, fence
,
2488 vmw_fence_obj_unreference(&fence
);
2492 * vmw_kms_update_proxy - Helper function to update a proxy surface from
2495 * @res: Pointer to the surface resource
2496 * @clips: Clip rects in framebuffer (surface) space.
2497 * @num_clips: Number of clips in @clips.
2498 * @increment: Integer with which to increment the clip counter when looping.
2499 * Used to skip a predetermined number of clip rects.
2501 * This function makes sure the proxy surface is updated from its backing MOB
2502 * using the region given by @clips. The surface resource @res and its backing
2503 * MOB needs to be reserved and validated on call.
2505 int vmw_kms_update_proxy(struct vmw_resource
*res
,
2506 const struct drm_clip_rect
*clips
,
2510 struct vmw_private
*dev_priv
= res
->dev_priv
;
2511 struct drm_vmw_size
*size
= &vmw_res_to_srf(res
)->metadata
.base_size
;
2513 SVGA3dCmdHeader header
;
2514 SVGA3dCmdUpdateGBImage body
;
2517 size_t copy_size
= 0;
2523 cmd
= VMW_FIFO_RESERVE(dev_priv
, sizeof(*cmd
) * num_clips
);
2527 for (i
= 0; i
< num_clips
; ++i
, clips
+= increment
, ++cmd
) {
2528 box
= &cmd
->body
.box
;
2530 cmd
->header
.id
= SVGA_3D_CMD_UPDATE_GB_IMAGE
;
2531 cmd
->header
.size
= sizeof(cmd
->body
);
2532 cmd
->body
.image
.sid
= res
->id
;
2533 cmd
->body
.image
.face
= 0;
2534 cmd
->body
.image
.mipmap
= 0;
2536 if (clips
->x1
> size
->width
|| clips
->x2
> size
->width
||
2537 clips
->y1
> size
->height
|| clips
->y2
> size
->height
) {
2538 DRM_ERROR("Invalid clips outsize of framebuffer.\n");
2545 box
->w
= clips
->x2
- clips
->x1
;
2546 box
->h
= clips
->y2
- clips
->y1
;
2549 copy_size
+= sizeof(*cmd
);
2552 vmw_fifo_commit(dev_priv
, copy_size
);
2557 int vmw_kms_fbdev_init_data(struct vmw_private
*dev_priv
,
2561 struct drm_connector
**p_con
,
2562 struct drm_crtc
**p_crtc
,
2563 struct drm_display_mode
**p_mode
)
2565 struct drm_connector
*con
;
2566 struct vmw_display_unit
*du
;
2567 struct drm_display_mode
*mode
;
2571 mutex_lock(&dev_priv
->dev
->mode_config
.mutex
);
2572 list_for_each_entry(con
, &dev_priv
->dev
->mode_config
.connector_list
,
2580 if (&con
->head
== &dev_priv
->dev
->mode_config
.connector_list
) {
2581 DRM_ERROR("Could not find initial display unit.\n");
2586 if (list_empty(&con
->modes
))
2587 (void) vmw_du_connector_fill_modes(con
, max_width
, max_height
);
2589 if (list_empty(&con
->modes
)) {
2590 DRM_ERROR("Could not find initial display mode.\n");
2595 du
= vmw_connector_to_du(con
);
2597 *p_crtc
= &du
->crtc
;
2599 list_for_each_entry(mode
, &con
->modes
, head
) {
2600 if (mode
->type
& DRM_MODE_TYPE_PREFERRED
)
2604 if (&mode
->head
== &con
->modes
) {
2605 WARN_ONCE(true, "Could not find initial preferred mode.\n");
2606 *p_mode
= list_first_entry(&con
->modes
,
2607 struct drm_display_mode
,
2614 mutex_unlock(&dev_priv
->dev
->mode_config
.mutex
);
2620 * vmw_kms_create_implicit_placement_proparty - Set up the implicit placement
2623 * @dev_priv: Pointer to a device private struct.
2625 * Sets up the implicit placement property unless it's already set up.
2628 vmw_kms_create_implicit_placement_property(struct vmw_private
*dev_priv
)
2630 if (dev_priv
->implicit_placement_property
)
2633 dev_priv
->implicit_placement_property
=
2634 drm_property_create_range(dev_priv
->dev
,
2635 DRM_MODE_PROP_IMMUTABLE
,
2636 "implicit_placement", 0, 1);
2640 * vmw_kms_suspend - Save modesetting state and turn modesetting off.
2642 * @dev: Pointer to the drm device
2643 * Return: 0 on success. Negative error code on failure.
2645 int vmw_kms_suspend(struct drm_device
*dev
)
2647 struct vmw_private
*dev_priv
= vmw_priv(dev
);
2649 dev_priv
->suspend_state
= drm_atomic_helper_suspend(dev
);
2650 if (IS_ERR(dev_priv
->suspend_state
)) {
2651 int ret
= PTR_ERR(dev_priv
->suspend_state
);
2653 DRM_ERROR("Failed kms suspend: %d\n", ret
);
2654 dev_priv
->suspend_state
= NULL
;
2664 * vmw_kms_resume - Re-enable modesetting and restore state
2666 * @dev: Pointer to the drm device
2667 * Return: 0 on success. Negative error code on failure.
2669 * State is resumed from a previous vmw_kms_suspend(). It's illegal
2670 * to call this function without a previous vmw_kms_suspend().
2672 int vmw_kms_resume(struct drm_device
*dev
)
2674 struct vmw_private
*dev_priv
= vmw_priv(dev
);
2677 if (WARN_ON(!dev_priv
->suspend_state
))
2680 ret
= drm_atomic_helper_resume(dev
, dev_priv
->suspend_state
);
2681 dev_priv
->suspend_state
= NULL
;
2687 * vmw_kms_lost_device - Notify kms that modesetting capabilities will be lost
2689 * @dev: Pointer to the drm device
2691 void vmw_kms_lost_device(struct drm_device
*dev
)
2693 drm_atomic_helper_shutdown(dev
);
2697 * vmw_du_helper_plane_update - Helper to do plane update on a display unit.
2698 * @update: The closure structure.
2700 * Call this helper after setting callbacks in &vmw_du_update_plane to do plane
2701 * update on display unit.
2703 * Return: 0 on success or a negative error code on failure.
2705 int vmw_du_helper_plane_update(struct vmw_du_update_plane
*update
)
2707 struct drm_plane_state
*state
= update
->plane
->state
;
2708 struct drm_plane_state
*old_state
= update
->old_state
;
2709 struct drm_atomic_helper_damage_iter iter
;
2710 struct drm_rect clip
;
2712 DECLARE_VAL_CONTEXT(val_ctx
, NULL
, 0);
2713 uint32_t reserved_size
= 0;
2714 uint32_t submit_size
= 0;
2715 uint32_t curr_size
= 0;
2716 uint32_t num_hits
= 0;
2722 * Iterate in advance to check if really need plane update and find the
2723 * number of clips that actually are in plane src for fifo allocation.
2725 drm_atomic_helper_damage_iter_init(&iter
, old_state
, state
);
2726 drm_atomic_for_each_plane_damage(&iter
, &clip
)
2732 if (update
->vfb
->bo
) {
2733 struct vmw_framebuffer_bo
*vfbbo
=
2734 container_of(update
->vfb
, typeof(*vfbbo
), base
);
2736 ret
= vmw_validation_add_bo(&val_ctx
, vfbbo
->buffer
, false,
2739 struct vmw_framebuffer_surface
*vfbs
=
2740 container_of(update
->vfb
, typeof(*vfbs
), base
);
2742 ret
= vmw_validation_add_resource(&val_ctx
, &vfbs
->surface
->res
,
2743 0, VMW_RES_DIRTY_NONE
, NULL
,
2750 ret
= vmw_validation_prepare(&val_ctx
, update
->mutex
, update
->intr
);
2754 reserved_size
= update
->calc_fifo_size(update
, num_hits
);
2755 cmd_start
= VMW_FIFO_RESERVE(update
->dev_priv
, reserved_size
);
2761 cmd_next
= cmd_start
;
2763 if (update
->post_prepare
) {
2764 curr_size
= update
->post_prepare(update
, cmd_next
);
2765 cmd_next
+= curr_size
;
2766 submit_size
+= curr_size
;
2769 if (update
->pre_clip
) {
2770 curr_size
= update
->pre_clip(update
, cmd_next
, num_hits
);
2771 cmd_next
+= curr_size
;
2772 submit_size
+= curr_size
;
2780 drm_atomic_helper_damage_iter_init(&iter
, old_state
, state
);
2781 drm_atomic_for_each_plane_damage(&iter
, &clip
) {
2782 uint32_t fb_x
= clip
.x1
;
2783 uint32_t fb_y
= clip
.y1
;
2785 vmw_du_translate_to_crtc(state
, &clip
);
2787 curr_size
= update
->clip(update
, cmd_next
, &clip
, fb_x
,
2789 cmd_next
+= curr_size
;
2790 submit_size
+= curr_size
;
2792 bb
.x1
= min_t(int, bb
.x1
, clip
.x1
);
2793 bb
.y1
= min_t(int, bb
.y1
, clip
.y1
);
2794 bb
.x2
= max_t(int, bb
.x2
, clip
.x2
);
2795 bb
.y2
= max_t(int, bb
.y2
, clip
.y2
);
2798 curr_size
= update
->post_clip(update
, cmd_next
, &bb
);
2799 submit_size
+= curr_size
;
2801 if (reserved_size
< submit_size
)
2804 vmw_fifo_commit(update
->dev_priv
, submit_size
);
2806 vmw_kms_helper_validation_finish(update
->dev_priv
, NULL
, &val_ctx
,
2807 update
->out_fence
, NULL
);
2811 vmw_validation_revert(&val_ctx
);
2814 vmw_validation_unref_lists(&val_ctx
);