WIP FPC-III support
[linux/fpc-iii.git] / drivers / iio / dac / ad5624r_spi.c
blob2b2b8edfd258cb311ee2126bd609356496959917
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * AD5624R, AD5644R, AD5664R Digital to analog convertors spi driver
5 * Copyright 2010-2011 Analog Devices Inc.
6 */
8 #include <linux/interrupt.h>
9 #include <linux/fs.h>
10 #include <linux/device.h>
11 #include <linux/kernel.h>
12 #include <linux/spi/spi.h>
13 #include <linux/slab.h>
14 #include <linux/sysfs.h>
15 #include <linux/regulator/consumer.h>
16 #include <linux/module.h>
18 #include <linux/iio/iio.h>
19 #include <linux/iio/sysfs.h>
21 #include <asm/unaligned.h>
23 #include "ad5624r.h"
25 static int ad5624r_spi_write(struct spi_device *spi,
26 u8 cmd, u8 addr, u16 val, u8 shift)
28 u32 data;
29 u8 msg[3];
32 * The input shift register is 24 bits wide. The first two bits are
33 * don't care bits. The next three are the command bits, C2 to C0,
34 * followed by the 3-bit DAC address, A2 to A0, and then the
35 * 16-, 14-, 12-bit data-word. The data-word comprises the 16-,
36 * 14-, 12-bit input code followed by 0, 2, or 4 don't care bits,
37 * for the AD5664R, AD5644R, and AD5624R, respectively.
39 data = (0 << 22) | (cmd << 19) | (addr << 16) | (val << shift);
40 put_unaligned_be24(data, &msg[0]);
42 return spi_write(spi, msg, sizeof(msg));
45 static int ad5624r_read_raw(struct iio_dev *indio_dev,
46 struct iio_chan_spec const *chan,
47 int *val,
48 int *val2,
49 long m)
51 struct ad5624r_state *st = iio_priv(indio_dev);
53 switch (m) {
54 case IIO_CHAN_INFO_SCALE:
55 *val = st->vref_mv;
56 *val2 = chan->scan_type.realbits;
57 return IIO_VAL_FRACTIONAL_LOG2;
59 return -EINVAL;
62 static int ad5624r_write_raw(struct iio_dev *indio_dev,
63 struct iio_chan_spec const *chan,
64 int val,
65 int val2,
66 long mask)
68 struct ad5624r_state *st = iio_priv(indio_dev);
70 switch (mask) {
71 case IIO_CHAN_INFO_RAW:
72 if (val >= (1 << chan->scan_type.realbits) || val < 0)
73 return -EINVAL;
75 return ad5624r_spi_write(st->us,
76 AD5624R_CMD_WRITE_INPUT_N_UPDATE_N,
77 chan->address, val,
78 chan->scan_type.shift);
79 default:
80 return -EINVAL;
84 static const char * const ad5624r_powerdown_modes[] = {
85 "1kohm_to_gnd",
86 "100kohm_to_gnd",
87 "three_state"
90 static int ad5624r_get_powerdown_mode(struct iio_dev *indio_dev,
91 const struct iio_chan_spec *chan)
93 struct ad5624r_state *st = iio_priv(indio_dev);
95 return st->pwr_down_mode;
98 static int ad5624r_set_powerdown_mode(struct iio_dev *indio_dev,
99 const struct iio_chan_spec *chan, unsigned int mode)
101 struct ad5624r_state *st = iio_priv(indio_dev);
103 st->pwr_down_mode = mode;
105 return 0;
108 static const struct iio_enum ad5624r_powerdown_mode_enum = {
109 .items = ad5624r_powerdown_modes,
110 .num_items = ARRAY_SIZE(ad5624r_powerdown_modes),
111 .get = ad5624r_get_powerdown_mode,
112 .set = ad5624r_set_powerdown_mode,
115 static ssize_t ad5624r_read_dac_powerdown(struct iio_dev *indio_dev,
116 uintptr_t private, const struct iio_chan_spec *chan, char *buf)
118 struct ad5624r_state *st = iio_priv(indio_dev);
120 return sprintf(buf, "%d\n",
121 !!(st->pwr_down_mask & (1 << chan->channel)));
124 static ssize_t ad5624r_write_dac_powerdown(struct iio_dev *indio_dev,
125 uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
126 size_t len)
128 bool pwr_down;
129 int ret;
130 struct ad5624r_state *st = iio_priv(indio_dev);
132 ret = strtobool(buf, &pwr_down);
133 if (ret)
134 return ret;
136 if (pwr_down)
137 st->pwr_down_mask |= (1 << chan->channel);
138 else
139 st->pwr_down_mask &= ~(1 << chan->channel);
141 ret = ad5624r_spi_write(st->us, AD5624R_CMD_POWERDOWN_DAC, 0,
142 (st->pwr_down_mode << 4) |
143 st->pwr_down_mask, 16);
145 return ret ? ret : len;
148 static const struct iio_info ad5624r_info = {
149 .write_raw = ad5624r_write_raw,
150 .read_raw = ad5624r_read_raw,
153 static const struct iio_chan_spec_ext_info ad5624r_ext_info[] = {
155 .name = "powerdown",
156 .read = ad5624r_read_dac_powerdown,
157 .write = ad5624r_write_dac_powerdown,
158 .shared = IIO_SEPARATE,
160 IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE,
161 &ad5624r_powerdown_mode_enum),
162 IIO_ENUM_AVAILABLE("powerdown_mode", &ad5624r_powerdown_mode_enum),
163 { },
166 #define AD5624R_CHANNEL(_chan, _bits) { \
167 .type = IIO_VOLTAGE, \
168 .indexed = 1, \
169 .output = 1, \
170 .channel = (_chan), \
171 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
172 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
173 .address = (_chan), \
174 .scan_type = { \
175 .sign = 'u', \
176 .realbits = (_bits), \
177 .storagebits = 16, \
178 .shift = 16 - (_bits), \
179 }, \
180 .ext_info = ad5624r_ext_info, \
183 #define DECLARE_AD5624R_CHANNELS(_name, _bits) \
184 const struct iio_chan_spec _name##_channels[] = { \
185 AD5624R_CHANNEL(0, _bits), \
186 AD5624R_CHANNEL(1, _bits), \
187 AD5624R_CHANNEL(2, _bits), \
188 AD5624R_CHANNEL(3, _bits), \
191 static DECLARE_AD5624R_CHANNELS(ad5624r, 12);
192 static DECLARE_AD5624R_CHANNELS(ad5644r, 14);
193 static DECLARE_AD5624R_CHANNELS(ad5664r, 16);
195 static const struct ad5624r_chip_info ad5624r_chip_info_tbl[] = {
196 [ID_AD5624R3] = {
197 .channels = ad5624r_channels,
198 .int_vref_mv = 1250,
200 [ID_AD5624R5] = {
201 .channels = ad5624r_channels,
202 .int_vref_mv = 2500,
204 [ID_AD5644R3] = {
205 .channels = ad5644r_channels,
206 .int_vref_mv = 1250,
208 [ID_AD5644R5] = {
209 .channels = ad5644r_channels,
210 .int_vref_mv = 2500,
212 [ID_AD5664R3] = {
213 .channels = ad5664r_channels,
214 .int_vref_mv = 1250,
216 [ID_AD5664R5] = {
217 .channels = ad5664r_channels,
218 .int_vref_mv = 2500,
222 static int ad5624r_probe(struct spi_device *spi)
224 struct ad5624r_state *st;
225 struct iio_dev *indio_dev;
226 int ret, voltage_uv = 0;
228 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
229 if (!indio_dev)
230 return -ENOMEM;
231 st = iio_priv(indio_dev);
232 st->reg = devm_regulator_get(&spi->dev, "vcc");
233 if (!IS_ERR(st->reg)) {
234 ret = regulator_enable(st->reg);
235 if (ret)
236 return ret;
238 ret = regulator_get_voltage(st->reg);
239 if (ret < 0)
240 goto error_disable_reg;
242 voltage_uv = ret;
245 spi_set_drvdata(spi, indio_dev);
246 st->chip_info =
247 &ad5624r_chip_info_tbl[spi_get_device_id(spi)->driver_data];
249 if (voltage_uv)
250 st->vref_mv = voltage_uv / 1000;
251 else
252 st->vref_mv = st->chip_info->int_vref_mv;
254 st->us = spi;
256 indio_dev->name = spi_get_device_id(spi)->name;
257 indio_dev->info = &ad5624r_info;
258 indio_dev->modes = INDIO_DIRECT_MODE;
259 indio_dev->channels = st->chip_info->channels;
260 indio_dev->num_channels = AD5624R_DAC_CHANNELS;
262 ret = ad5624r_spi_write(spi, AD5624R_CMD_INTERNAL_REFER_SETUP, 0,
263 !!voltage_uv, 16);
264 if (ret)
265 goto error_disable_reg;
267 ret = iio_device_register(indio_dev);
268 if (ret)
269 goto error_disable_reg;
271 return 0;
273 error_disable_reg:
274 if (!IS_ERR(st->reg))
275 regulator_disable(st->reg);
277 return ret;
280 static int ad5624r_remove(struct spi_device *spi)
282 struct iio_dev *indio_dev = spi_get_drvdata(spi);
283 struct ad5624r_state *st = iio_priv(indio_dev);
285 iio_device_unregister(indio_dev);
286 if (!IS_ERR(st->reg))
287 regulator_disable(st->reg);
289 return 0;
292 static const struct spi_device_id ad5624r_id[] = {
293 {"ad5624r3", ID_AD5624R3},
294 {"ad5644r3", ID_AD5644R3},
295 {"ad5664r3", ID_AD5664R3},
296 {"ad5624r5", ID_AD5624R5},
297 {"ad5644r5", ID_AD5644R5},
298 {"ad5664r5", ID_AD5664R5},
301 MODULE_DEVICE_TABLE(spi, ad5624r_id);
303 static struct spi_driver ad5624r_driver = {
304 .driver = {
305 .name = "ad5624r",
307 .probe = ad5624r_probe,
308 .remove = ad5624r_remove,
309 .id_table = ad5624r_id,
311 module_spi_driver(ad5624r_driver);
313 MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
314 MODULE_DESCRIPTION("Analog Devices AD5624/44/64R DAC spi driver");
315 MODULE_LICENSE("GPL v2");