WIP FPC-III support
[linux/fpc-iii.git] / drivers / isdn / hardware / mISDN / hfc_multi_8xx.h
blob448ded8f9d24e384ae5f6fb11bf44a3a543703d7
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * For License see notice in hfc_multi.c
5 * special IO and init functions for the embedded XHFC board
6 * from Speech Design
8 */
10 #include <asm/cpm1.h>
12 /* Change this to the value used by your board */
13 #ifndef IMAP_ADDR
14 #define IMAP_ADDR 0xFFF00000
15 #endif
17 static void
18 #ifdef HFC_REGISTER_DEBUG
19 HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val,
20 const char *function, int line)
21 #else
22 HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val)
23 #endif
25 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
26 writeb(reg, hc->xhfc_memaddr);
27 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
28 writeb(val, hc->xhfc_memdata);
30 static u_char
31 #ifdef HFC_REGISTER_DEBUG
32 HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
33 #else
34 HFC_inb_embsd(struct hfc_multi *hc, u_char reg)
35 #endif
37 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
38 writeb(reg, hc->xhfc_memaddr);
39 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
40 return readb(hc->xhfc_memdata);
42 static u_short
43 #ifdef HFC_REGISTER_DEBUG
44 HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
45 #else
46 HFC_inw_embsd(struct hfc_multi *hc, u_char reg)
47 #endif
49 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
50 writeb(reg, hc->xhfc_memaddr);
51 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
52 return readb(hc->xhfc_memdata);
54 static void
55 #ifdef HFC_REGISTER_DEBUG
56 HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line)
57 #else
58 HFC_wait_embsd(struct hfc_multi *hc)
59 #endif
61 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
62 writeb(R_STATUS, hc->xhfc_memaddr);
63 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
64 while (readb(hc->xhfc_memdata) & V_BUSY)
65 cpu_relax();
68 /* write fifo data (EMBSD) */
69 void
70 write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
72 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
73 *hc->xhfc_memaddr = A_FIFO_DATA0;
74 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
75 while (len) {
76 *hc->xhfc_memdata = *data;
77 data++;
78 len--;
82 /* read fifo data (EMBSD) */
83 void
84 read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
86 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
87 *hc->xhfc_memaddr = A_FIFO_DATA0;
88 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
89 while (len) {
90 *data = (u_char)(*hc->xhfc_memdata);
91 data++;
92 len--;
96 static int
97 setup_embedded(struct hfc_multi *hc, struct hm_map *m)
99 printk(KERN_INFO
100 "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
101 m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
103 hc->pci_dev = NULL;
104 if (m->clock2)
105 test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
107 hc->leds = m->leds;
108 hc->ledstate = 0xAFFEAFFE;
109 hc->opticalsupport = m->opticalsupport;
111 hc->pci_iobase = 0;
112 hc->pci_membase = 0;
113 hc->xhfc_membase = NULL;
114 hc->xhfc_memaddr = NULL;
115 hc->xhfc_memdata = NULL;
117 /* set memory access methods */
118 if (m->io_mode) /* use mode from card config */
119 hc->io_mode = m->io_mode;
120 switch (hc->io_mode) {
121 case HFC_IO_MODE_EMBSD:
122 test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip);
123 hc->slots = 128; /* required */
124 hc->HFC_outb = HFC_outb_embsd;
125 hc->HFC_inb = HFC_inb_embsd;
126 hc->HFC_inw = HFC_inw_embsd;
127 hc->HFC_wait = HFC_wait_embsd;
128 hc->read_fifo = read_fifo_embsd;
129 hc->write_fifo = write_fifo_embsd;
130 hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id;
131 hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase,
132 XHFC_MEMSIZE);
133 if (!hc->xhfc_membase) {
134 printk(KERN_WARNING
135 "HFC-multi: failed to remap xhfc address space. "
136 "(internal error)\n");
137 return -EIO;
139 hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4);
140 hc->xhfc_memdata = (u_long *)(hc->xhfc_membase);
141 printk(KERN_INFO
142 "HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx "
143 "xhfc_memaddr:%#lx xhfc_memdata:%#lx\n",
144 (u_long)hc->xhfc_membase, hc->xhfc_origmembase,
145 (u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata);
146 break;
147 default:
148 printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
149 return -EIO;
152 /* Prepare the MPC8XX PortA 10 as output (address/data selector) */
153 hc->immap = (struct immap *)(IMAP_ADDR);
154 hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0);
155 hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0);
156 hc->immap->im_ioport.iop_padir |= PA_XHFC_A0;
158 /* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */
159 hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id);
160 hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk);
161 hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk);
162 hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk);
164 /* At this point the needed config is done */
165 /* fifos are still not enabled */
166 return 0;