WIP FPC-III support
[linux/fpc-iii.git] / drivers / media / dvb-frontends / ix2505v.c
blob73f27105c139d74ae4afdca16b83c6b8fef6aaac
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner
5 * Copyright (C) 2010 Malcolm Priestley
6 */
8 #include <linux/module.h>
9 #include <linux/dvb/frontend.h>
10 #include <linux/slab.h>
11 #include <linux/types.h>
13 #include "ix2505v.h"
15 static int ix2505v_debug;
16 #define dprintk(level, args...) do { \
17 if (ix2505v_debug & level) \
18 printk(KERN_DEBUG "ix2505v: " args); \
19 } while (0)
21 #define deb_info(args...) dprintk(0x01, args)
22 #define deb_i2c(args...) dprintk(0x02, args)
24 struct ix2505v_state {
25 struct i2c_adapter *i2c;
26 const struct ix2505v_config *config;
27 u32 frequency;
31 * Data read format of the Sharp IX2505V B0017
33 * byte1: 1 | 1 | 0 | 0 | 0 | MA1 | MA0 | 1
34 * byte2: POR | FL | RD2 | RD1 | RD0 | X | X | X
36 * byte1 = address
37 * byte2;
38 * POR = Power on Reset (VCC H=<2.2v L=>2.2v)
39 * FL = Phase Lock (H=lock L=unlock)
40 * RD0-2 = Reserved internal operations
42 * Only POR can be used to check the tuner is present
44 * Caution: after byte2 the I2C reverts to write mode continuing to read
45 * may corrupt tuning data.
49 static int ix2505v_read_status_reg(struct ix2505v_state *state)
51 u8 addr = state->config->tuner_address;
52 u8 b2[] = {0};
53 int ret;
55 struct i2c_msg msg[1] = {
56 { .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 }
59 ret = i2c_transfer(state->i2c, msg, 1);
60 deb_i2c("Read %s ", __func__);
62 return (ret == 1) ? (int) b2[0] : -1;
65 static int ix2505v_write(struct ix2505v_state *state, u8 buf[], u8 count)
67 struct i2c_msg msg[1] = {
68 { .addr = state->config->tuner_address, .flags = 0,
69 .buf = buf, .len = count },
72 int ret;
74 ret = i2c_transfer(state->i2c, msg, 1);
76 if (ret != 1) {
77 deb_i2c("%s: i2c error, ret=%d\n", __func__, ret);
78 return -EIO;
81 return 0;
84 static void ix2505v_release(struct dvb_frontend *fe)
86 struct ix2505v_state *state = fe->tuner_priv;
88 fe->tuner_priv = NULL;
89 kfree(state);
94 * Data write format of the Sharp IX2505V B0017
96 * byte1: 1 | 1 | 0 | 0 | 0 | 0(MA1)| 0(MA0)| 0
97 * byte2: 0 | BG1 | BG2 | N8 | N7 | N6 | N5 | N4
98 * byte3: N3 | N2 | N1 | A5 | A4 | A3 | A2 | A1
99 * byte4: 1 | 1(C1) | 1(C0) | PD5 | PD4 | TM | 0(RTS)| 1(REF)
100 * byte5: BA2 | BA1 | BA0 | PSC | PD3 |PD2/TS2|DIV/TS1|PD0/TS0
102 * byte1 = address
104 * Write order
105 * 1) byte1 -> byte2 -> byte3 -> byte4 -> byte5
106 * 2) byte1 -> byte4 -> byte5 -> byte2 -> byte3
107 * 3) byte1 -> byte2 -> byte3 -> byte4
108 * 4) byte1 -> byte4 -> byte5 -> byte2
109 * 5) byte1 -> byte2 -> byte3
110 * 6) byte1 -> byte4 -> byte5
111 * 7) byte1 -> byte2
112 * 8) byte1 -> byte4
114 * Recommended Setup
115 * 1 -> 8 -> 6
118 static int ix2505v_set_params(struct dvb_frontend *fe)
120 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
121 struct ix2505v_state *state = fe->tuner_priv;
122 u32 frequency = c->frequency;
123 u32 b_w = (c->symbol_rate * 27) / 32000;
124 u32 div_factor, N , A, x;
125 int ret = 0, len;
126 u8 gain, cc, ref, psc, local_osc, lpf;
127 u8 data[4] = {0};
129 if ((frequency < fe->ops.info.frequency_min_hz / kHz)
130 || (frequency > fe->ops.info.frequency_max_hz / kHz))
131 return -EINVAL;
133 if (state->config->tuner_gain)
134 gain = (state->config->tuner_gain < 4)
135 ? state->config->tuner_gain : 0;
136 else
137 gain = 0x0;
139 if (state->config->tuner_chargepump)
140 cc = state->config->tuner_chargepump;
141 else
142 cc = 0x3;
144 ref = 8; /* REF =1 */
145 psc = 32; /* PSC = 0 */
147 div_factor = (frequency * ref) / 40; /* local osc = 4Mhz */
148 x = div_factor / psc;
149 N = x/100;
150 A = ((x - (N * 100)) * psc) / 100;
152 data[0] = ((gain & 0x3) << 5) | (N >> 3);
153 data[1] = (N << 5) | (A & 0x1f);
154 data[2] = 0x81 | ((cc & 0x3) << 5) ; /*PD5,PD4 & TM = 0|C1,C0|REF=1*/
156 deb_info("Frq=%d x=%d N=%d A=%d\n", frequency, x, N, A);
158 if (frequency <= 1065000)
159 local_osc = (6 << 5) | 2;
160 else if (frequency <= 1170000)
161 local_osc = (7 << 5) | 2;
162 else if (frequency <= 1300000)
163 local_osc = (1 << 5);
164 else if (frequency <= 1445000)
165 local_osc = (2 << 5);
166 else if (frequency <= 1607000)
167 local_osc = (3 << 5);
168 else if (frequency <= 1778000)
169 local_osc = (4 << 5);
170 else if (frequency <= 1942000)
171 local_osc = (5 << 5);
172 else /*frequency up to 2150000*/
173 local_osc = (6 << 5);
175 data[3] = local_osc; /* all other bits set 0 */
177 if (b_w <= 10000)
178 lpf = 0xc;
179 else if (b_w <= 12000)
180 lpf = 0x2;
181 else if (b_w <= 14000)
182 lpf = 0xa;
183 else if (b_w <= 16000)
184 lpf = 0x6;
185 else if (b_w <= 18000)
186 lpf = 0xe;
187 else if (b_w <= 20000)
188 lpf = 0x1;
189 else if (b_w <= 22000)
190 lpf = 0x9;
191 else if (b_w <= 24000)
192 lpf = 0x5;
193 else if (b_w <= 26000)
194 lpf = 0xd;
195 else if (b_w <= 28000)
196 lpf = 0x3;
197 else
198 lpf = 0xb;
200 deb_info("Osc=%x b_w=%x lpf=%x\n", local_osc, b_w, lpf);
201 deb_info("Data 0=[%4phN]\n", data);
203 if (fe->ops.i2c_gate_ctrl)
204 fe->ops.i2c_gate_ctrl(fe, 1);
206 len = sizeof(data);
207 ret |= ix2505v_write(state, data, len);
209 data[2] |= 0x4; /* set TM = 1 other bits same */
211 if (fe->ops.i2c_gate_ctrl)
212 fe->ops.i2c_gate_ctrl(fe, 1);
214 len = 1;
215 ret |= ix2505v_write(state, &data[2], len); /* write byte 4 only */
217 msleep(10);
219 data[2] |= ((lpf >> 2) & 0x3) << 3; /* lpf */
220 data[3] |= (lpf & 0x3) << 2;
222 deb_info("Data 2=[%x%x]\n", data[2], data[3]);
224 if (fe->ops.i2c_gate_ctrl)
225 fe->ops.i2c_gate_ctrl(fe, 1);
227 len = 2;
228 ret |= ix2505v_write(state, &data[2], len); /* write byte 4 & 5 */
230 if (state->config->min_delay_ms)
231 msleep(state->config->min_delay_ms);
233 state->frequency = frequency;
235 return ret;
238 static int ix2505v_get_frequency(struct dvb_frontend *fe, u32 *frequency)
240 struct ix2505v_state *state = fe->tuner_priv;
242 *frequency = state->frequency;
244 return 0;
247 static const struct dvb_tuner_ops ix2505v_tuner_ops = {
248 .info = {
249 .name = "Sharp IX2505V (B0017)",
250 .frequency_min_hz = 950 * MHz,
251 .frequency_max_hz = 2175 * MHz
253 .release = ix2505v_release,
254 .set_params = ix2505v_set_params,
255 .get_frequency = ix2505v_get_frequency,
258 struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe,
259 const struct ix2505v_config *config,
260 struct i2c_adapter *i2c)
262 struct ix2505v_state *state = NULL;
263 int ret;
265 if (NULL == config) {
266 deb_i2c("%s: no config ", __func__);
267 goto error;
270 state = kzalloc(sizeof(struct ix2505v_state), GFP_KERNEL);
271 if (NULL == state)
272 return NULL;
274 state->config = config;
275 state->i2c = i2c;
277 if (state->config->tuner_write_only) {
278 if (fe->ops.i2c_gate_ctrl)
279 fe->ops.i2c_gate_ctrl(fe, 1);
281 ret = ix2505v_read_status_reg(state);
283 if (ret & 0x80) {
284 deb_i2c("%s: No IX2505V found\n", __func__);
285 goto error;
288 if (fe->ops.i2c_gate_ctrl)
289 fe->ops.i2c_gate_ctrl(fe, 0);
292 fe->tuner_priv = state;
294 memcpy(&fe->ops.tuner_ops, &ix2505v_tuner_ops,
295 sizeof(struct dvb_tuner_ops));
296 deb_i2c("%s: initialization (%s addr=0x%02x) ok\n",
297 __func__, fe->ops.tuner_ops.info.name, config->tuner_address);
299 return fe;
301 error:
302 kfree(state);
303 return NULL;
305 EXPORT_SYMBOL(ix2505v_attach);
307 module_param_named(debug, ix2505v_debug, int, 0644);
308 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
309 MODULE_DESCRIPTION("DVB IX2505V tuner driver");
310 MODULE_AUTHOR("Malcolm Priestley");
311 MODULE_LICENSE("GPL");