1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Driver for the NXP SAA7164 PCIe bridge
5 * Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
10 #define ENCODER_MAX_BITRATE 6500000
11 #define ENCODER_MIN_BITRATE 1000000
12 #define ENCODER_DEF_BITRATE 5000000
15 * This is a dummy non-zero value for the sizeimage field of v4l2_pix_format.
16 * It is not actually used for anything since this driver does not support
17 * stream I/O, only read(), and because this driver produces an MPEG stream
18 * and not discrete frames. But the V4L2 spec doesn't allow for this value
19 * to be 0, so set it to 0x10000 instead.
21 * If we ever change this driver to support stream I/O, then this field
22 * will be the size of the streaming buffers.
24 #define SAA7164_SIZEIMAGE (0x10000)
26 static struct saa7164_tvnorm saa7164_tvnorms
[] = {
29 .id
= V4L2_STD_NTSC_M
,
32 .id
= V4L2_STD_NTSC_M_JP
,
36 /* Take the encoder configuration form the port struct and
37 * flush it to the hardware.
39 static void saa7164_encoder_configure(struct saa7164_port
*port
)
41 struct saa7164_dev
*dev
= port
->dev
;
42 dprintk(DBGLVL_ENC
, "%s()\n", __func__
);
44 port
->encoder_params
.width
= port
->width
;
45 port
->encoder_params
.height
= port
->height
;
46 port
->encoder_params
.is_50hz
=
47 (port
->encodernorm
.id
& V4L2_STD_625_50
) != 0;
49 /* Set up the DIF (enable it) for analog mode by default */
50 saa7164_api_initialize_dif(port
);
52 /* Configure the correct video standard */
53 saa7164_api_configure_dif(port
, port
->encodernorm
.id
);
55 /* Ensure the audio decoder is correct configured */
56 saa7164_api_set_audio_std(port
);
59 static int saa7164_encoder_buffers_dealloc(struct saa7164_port
*port
)
61 struct list_head
*c
, *n
, *p
, *q
, *l
, *v
;
62 struct saa7164_dev
*dev
= port
->dev
;
63 struct saa7164_buffer
*buf
;
64 struct saa7164_user_buffer
*ubuf
;
66 /* Remove any allocated buffers */
67 mutex_lock(&port
->dmaqueue_lock
);
69 dprintk(DBGLVL_ENC
, "%s(port=%d) dmaqueue\n", __func__
, port
->nr
);
70 list_for_each_safe(c
, n
, &port
->dmaqueue
.list
) {
71 buf
= list_entry(c
, struct saa7164_buffer
, list
);
73 saa7164_buffer_dealloc(buf
);
76 dprintk(DBGLVL_ENC
, "%s(port=%d) used\n", __func__
, port
->nr
);
77 list_for_each_safe(p
, q
, &port
->list_buf_used
.list
) {
78 ubuf
= list_entry(p
, struct saa7164_user_buffer
, list
);
80 saa7164_buffer_dealloc_user(ubuf
);
83 dprintk(DBGLVL_ENC
, "%s(port=%d) free\n", __func__
, port
->nr
);
84 list_for_each_safe(l
, v
, &port
->list_buf_free
.list
) {
85 ubuf
= list_entry(l
, struct saa7164_user_buffer
, list
);
87 saa7164_buffer_dealloc_user(ubuf
);
90 mutex_unlock(&port
->dmaqueue_lock
);
91 dprintk(DBGLVL_ENC
, "%s(port=%d) done\n", __func__
, port
->nr
);
96 /* Dynamic buffer switch at encoder start time */
97 static int saa7164_encoder_buffers_alloc(struct saa7164_port
*port
)
99 struct saa7164_dev
*dev
= port
->dev
;
100 struct saa7164_buffer
*buf
;
101 struct saa7164_user_buffer
*ubuf
;
102 struct tmHWStreamParameters
*params
= &port
->hw_streamingparams
;
103 int result
= -ENODEV
, i
;
106 dprintk(DBGLVL_ENC
, "%s()\n", __func__
);
108 if (port
->encoder_params
.stream_type
==
109 V4L2_MPEG_STREAM_TYPE_MPEG2_PS
) {
111 "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_PS\n",
113 params
->samplesperline
= 128;
114 params
->numberoflines
= 256;
116 params
->numpagetables
= 2 +
117 ((SAA7164_PS_NUMBER_OF_LINES
* 128) / PAGE_SIZE
);
119 if (port
->encoder_params
.stream_type
==
120 V4L2_MPEG_STREAM_TYPE_MPEG2_TS
) {
122 "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_TS\n",
124 params
->samplesperline
= 188;
125 params
->numberoflines
= 312;
127 params
->numpagetables
= 2 +
128 ((SAA7164_TS_NUMBER_OF_LINES
* 188) / PAGE_SIZE
);
132 /* Init and establish defaults */
133 params
->bitspersample
= 8;
134 params
->linethreshold
= 0;
135 params
->pagetablelistvirt
= NULL
;
136 params
->pagetablelistphys
= NULL
;
137 params
->numpagetableentries
= port
->hwcfg
.buffercount
;
139 /* Allocate the PCI resources, buffers (hard) */
140 for (i
= 0; i
< port
->hwcfg
.buffercount
; i
++) {
141 buf
= saa7164_buffer_alloc(port
,
142 params
->numberoflines
*
146 printk(KERN_ERR
"%s() failed (errno = %d), unable to allocate buffer\n",
152 mutex_lock(&port
->dmaqueue_lock
);
153 list_add_tail(&buf
->list
, &port
->dmaqueue
.list
);
154 mutex_unlock(&port
->dmaqueue_lock
);
159 /* Allocate some kernel buffers for copying
162 len
= params
->numberoflines
* params
->pitch
;
164 if (encoder_buffers
< 16)
165 encoder_buffers
= 16;
166 if (encoder_buffers
> 512)
167 encoder_buffers
= 512;
169 for (i
= 0; i
< encoder_buffers
; i
++) {
171 ubuf
= saa7164_buffer_alloc_user(dev
, len
);
173 mutex_lock(&port
->dmaqueue_lock
);
174 list_add_tail(&ubuf
->list
, &port
->list_buf_free
.list
);
175 mutex_unlock(&port
->dmaqueue_lock
);
186 static int saa7164_encoder_initialize(struct saa7164_port
*port
)
188 saa7164_encoder_configure(port
);
192 /* -- V4L2 --------------------------------------------------------- */
193 int saa7164_s_std(struct saa7164_port
*port
, v4l2_std_id id
)
195 struct saa7164_dev
*dev
= port
->dev
;
198 dprintk(DBGLVL_ENC
, "%s(id=0x%x)\n", __func__
, (u32
)id
);
200 for (i
= 0; i
< ARRAY_SIZE(saa7164_tvnorms
); i
++) {
201 if (id
& saa7164_tvnorms
[i
].id
)
204 if (i
== ARRAY_SIZE(saa7164_tvnorms
))
207 port
->encodernorm
= saa7164_tvnorms
[i
];
210 /* Update the audio decoder while is not running in
213 saa7164_api_set_audio_std(port
);
215 dprintk(DBGLVL_ENC
, "%s(id=0x%x) OK\n", __func__
, (u32
)id
);
220 static int vidioc_s_std(struct file
*file
, void *priv
, v4l2_std_id id
)
222 struct saa7164_encoder_fh
*fh
= file
->private_data
;
224 return saa7164_s_std(fh
->port
, id
);
227 int saa7164_g_std(struct saa7164_port
*port
, v4l2_std_id
*id
)
233 static int vidioc_g_std(struct file
*file
, void *priv
, v4l2_std_id
*id
)
235 struct saa7164_encoder_fh
*fh
= file
->private_data
;
237 return saa7164_g_std(fh
->port
, id
);
240 int saa7164_enum_input(struct file
*file
, void *priv
, struct v4l2_input
*i
)
242 static const char * const inputs
[] = {
243 "tuner", "composite", "svideo", "aux",
244 "composite 2", "svideo 2", "aux 2"
251 strscpy(i
->name
, inputs
[i
->index
], sizeof(i
->name
));
254 i
->type
= V4L2_INPUT_TYPE_TUNER
;
256 i
->type
= V4L2_INPUT_TYPE_CAMERA
;
258 for (n
= 0; n
< ARRAY_SIZE(saa7164_tvnorms
); n
++)
259 i
->std
|= saa7164_tvnorms
[n
].id
;
264 int saa7164_g_input(struct saa7164_port
*port
, unsigned int *i
)
266 struct saa7164_dev
*dev
= port
->dev
;
268 if (saa7164_api_get_videomux(port
) != SAA_OK
)
271 *i
= (port
->mux_input
- 1);
273 dprintk(DBGLVL_ENC
, "%s() input=%d\n", __func__
, *i
);
278 static int vidioc_g_input(struct file
*file
, void *priv
, unsigned int *i
)
280 struct saa7164_encoder_fh
*fh
= file
->private_data
;
282 return saa7164_g_input(fh
->port
, i
);
285 int saa7164_s_input(struct saa7164_port
*port
, unsigned int i
)
287 struct saa7164_dev
*dev
= port
->dev
;
289 dprintk(DBGLVL_ENC
, "%s() input=%d\n", __func__
, i
);
294 port
->mux_input
= i
+ 1;
296 if (saa7164_api_set_videomux(port
) != SAA_OK
)
302 static int vidioc_s_input(struct file
*file
, void *priv
, unsigned int i
)
304 struct saa7164_encoder_fh
*fh
= file
->private_data
;
306 return saa7164_s_input(fh
->port
, i
);
309 int saa7164_g_tuner(struct file
*file
, void *priv
, struct v4l2_tuner
*t
)
311 struct saa7164_encoder_fh
*fh
= file
->private_data
;
312 struct saa7164_port
*port
= fh
->port
;
313 struct saa7164_dev
*dev
= port
->dev
;
318 strscpy(t
->name
, "tuner", sizeof(t
->name
));
319 t
->capability
= V4L2_TUNER_CAP_NORM
| V4L2_TUNER_CAP_STEREO
;
320 t
->rangelow
= SAA7164_TV_MIN_FREQ
;
321 t
->rangehigh
= SAA7164_TV_MAX_FREQ
;
323 dprintk(DBGLVL_ENC
, "VIDIOC_G_TUNER: tuner type %d\n", t
->type
);
328 int saa7164_s_tuner(struct file
*file
, void *priv
,
329 const struct v4l2_tuner
*t
)
334 /* Update the A/V core */
338 int saa7164_g_frequency(struct saa7164_port
*port
, struct v4l2_frequency
*f
)
343 f
->frequency
= port
->freq
;
347 static int vidioc_g_frequency(struct file
*file
, void *priv
,
348 struct v4l2_frequency
*f
)
350 struct saa7164_encoder_fh
*fh
= file
->private_data
;
352 return saa7164_g_frequency(fh
->port
, f
);
355 int saa7164_s_frequency(struct saa7164_port
*port
,
356 const struct v4l2_frequency
*f
)
358 struct saa7164_dev
*dev
= port
->dev
;
359 struct saa7164_port
*tsport
;
360 struct dvb_frontend
*fe
;
362 /* TODO: Pull this for the std */
363 struct analog_parameters params
= {
364 .mode
= V4L2_TUNER_ANALOG_TV
,
365 .audmode
= V4L2_TUNER_MODE_STEREO
,
366 .std
= port
->encodernorm
.id
,
367 .frequency
= f
->frequency
370 /* Stop the encoder */
371 dprintk(DBGLVL_ENC
, "%s() frequency=%d tuner=%d\n", __func__
,
372 f
->frequency
, f
->tuner
);
377 port
->freq
= clamp(f
->frequency
,
378 SAA7164_TV_MIN_FREQ
, SAA7164_TV_MAX_FREQ
);
380 /* Update the hardware */
381 if (port
->nr
== SAA7164_PORT_ENC1
)
382 tsport
= &dev
->ports
[SAA7164_PORT_TS1
];
383 else if (port
->nr
== SAA7164_PORT_ENC2
)
384 tsport
= &dev
->ports
[SAA7164_PORT_TS2
];
388 fe
= tsport
->dvb
.frontend
;
390 if (fe
&& fe
->ops
.tuner_ops
.set_analog_params
)
391 fe
->ops
.tuner_ops
.set_analog_params(fe
, ¶ms
);
393 printk(KERN_ERR
"%s() No analog tuner, aborting\n", __func__
);
395 saa7164_encoder_initialize(port
);
400 static int vidioc_s_frequency(struct file
*file
, void *priv
,
401 const struct v4l2_frequency
*f
)
403 struct saa7164_encoder_fh
*fh
= file
->private_data
;
405 return saa7164_s_frequency(fh
->port
, f
);
408 static int saa7164_s_ctrl(struct v4l2_ctrl
*ctrl
)
410 struct saa7164_port
*port
=
411 container_of(ctrl
->handler
, struct saa7164_port
, ctrl_handler
);
412 struct saa7164_encoder_params
*params
= &port
->encoder_params
;
416 case V4L2_CID_BRIGHTNESS
:
417 port
->ctl_brightness
= ctrl
->val
;
418 saa7164_api_set_usercontrol(port
, PU_BRIGHTNESS_CONTROL
);
420 case V4L2_CID_CONTRAST
:
421 port
->ctl_contrast
= ctrl
->val
;
422 saa7164_api_set_usercontrol(port
, PU_CONTRAST_CONTROL
);
424 case V4L2_CID_SATURATION
:
425 port
->ctl_saturation
= ctrl
->val
;
426 saa7164_api_set_usercontrol(port
, PU_SATURATION_CONTROL
);
429 port
->ctl_hue
= ctrl
->val
;
430 saa7164_api_set_usercontrol(port
, PU_HUE_CONTROL
);
432 case V4L2_CID_SHARPNESS
:
433 port
->ctl_sharpness
= ctrl
->val
;
434 saa7164_api_set_usercontrol(port
, PU_SHARPNESS_CONTROL
);
436 case V4L2_CID_AUDIO_VOLUME
:
437 port
->ctl_volume
= ctrl
->val
;
438 saa7164_api_set_audio_volume(port
, port
->ctl_volume
);
440 case V4L2_CID_MPEG_VIDEO_BITRATE
:
441 params
->bitrate
= ctrl
->val
;
443 case V4L2_CID_MPEG_STREAM_TYPE
:
444 params
->stream_type
= ctrl
->val
;
446 case V4L2_CID_MPEG_AUDIO_MUTE
:
447 params
->ctl_mute
= ctrl
->val
;
448 ret
= saa7164_api_audio_mute(port
, params
->ctl_mute
);
450 printk(KERN_ERR
"%s() error, ret = 0x%x\n", __func__
,
455 case V4L2_CID_MPEG_VIDEO_ASPECT
:
456 params
->ctl_aspect
= ctrl
->val
;
457 ret
= saa7164_api_set_aspect_ratio(port
);
459 printk(KERN_ERR
"%s() error, ret = 0x%x\n", __func__
,
464 case V4L2_CID_MPEG_VIDEO_BITRATE_MODE
:
465 params
->bitrate_mode
= ctrl
->val
;
467 case V4L2_CID_MPEG_VIDEO_B_FRAMES
:
468 params
->refdist
= ctrl
->val
;
470 case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK
:
471 params
->bitrate_peak
= ctrl
->val
;
473 case V4L2_CID_MPEG_VIDEO_GOP_SIZE
:
474 params
->gop_size
= ctrl
->val
;
483 static int vidioc_querycap(struct file
*file
, void *priv
,
484 struct v4l2_capability
*cap
)
486 struct saa7164_encoder_fh
*fh
= file
->private_data
;
487 struct saa7164_port
*port
= fh
->port
;
488 struct saa7164_dev
*dev
= port
->dev
;
490 strscpy(cap
->driver
, dev
->name
, sizeof(cap
->driver
));
491 strscpy(cap
->card
, saa7164_boards
[dev
->board
].name
,
493 sprintf(cap
->bus_info
, "PCI:%s", pci_name(dev
->pci
));
494 cap
->capabilities
= V4L2_CAP_VIDEO_CAPTURE
| V4L2_CAP_READWRITE
|
495 V4L2_CAP_TUNER
| V4L2_CAP_VBI_CAPTURE
|
496 V4L2_CAP_DEVICE_CAPS
;
500 static int vidioc_enum_fmt_vid_cap(struct file
*file
, void *priv
,
501 struct v4l2_fmtdesc
*f
)
506 f
->pixelformat
= V4L2_PIX_FMT_MPEG
;
511 static int vidioc_fmt_vid_cap(struct file
*file
, void *priv
,
512 struct v4l2_format
*f
)
514 struct saa7164_encoder_fh
*fh
= file
->private_data
;
515 struct saa7164_port
*port
= fh
->port
;
517 f
->fmt
.pix
.pixelformat
= V4L2_PIX_FMT_MPEG
;
518 f
->fmt
.pix
.bytesperline
= 0;
519 f
->fmt
.pix
.sizeimage
= SAA7164_SIZEIMAGE
;
520 f
->fmt
.pix
.field
= V4L2_FIELD_INTERLACED
;
521 f
->fmt
.pix
.colorspace
= V4L2_COLORSPACE_SMPTE170M
;
522 f
->fmt
.pix
.width
= port
->width
;
523 f
->fmt
.pix
.height
= port
->height
;
527 static int saa7164_encoder_stop_port(struct saa7164_port
*port
)
529 struct saa7164_dev
*dev
= port
->dev
;
532 ret
= saa7164_api_transition_port(port
, SAA_DMASTATE_STOP
);
533 if ((ret
!= SAA_OK
) && (ret
!= SAA_ERR_ALREADY_STOPPED
)) {
534 printk(KERN_ERR
"%s() stop transition failed, ret = 0x%x\n",
538 dprintk(DBGLVL_ENC
, "%s() Stopped\n", __func__
);
545 static int saa7164_encoder_acquire_port(struct saa7164_port
*port
)
547 struct saa7164_dev
*dev
= port
->dev
;
550 ret
= saa7164_api_transition_port(port
, SAA_DMASTATE_ACQUIRE
);
551 if ((ret
!= SAA_OK
) && (ret
!= SAA_ERR_ALREADY_STOPPED
)) {
552 printk(KERN_ERR
"%s() acquire transition failed, ret = 0x%x\n",
556 dprintk(DBGLVL_ENC
, "%s() Acquired\n", __func__
);
563 static int saa7164_encoder_pause_port(struct saa7164_port
*port
)
565 struct saa7164_dev
*dev
= port
->dev
;
568 ret
= saa7164_api_transition_port(port
, SAA_DMASTATE_PAUSE
);
569 if ((ret
!= SAA_OK
) && (ret
!= SAA_ERR_ALREADY_STOPPED
)) {
570 printk(KERN_ERR
"%s() pause transition failed, ret = 0x%x\n",
574 dprintk(DBGLVL_ENC
, "%s() Paused\n", __func__
);
581 /* Firmware is very windows centric, meaning you have to transition
582 * the part through AVStream / KS Windows stages, forwards or backwards.
583 * States are: stopped, acquired (h/w), paused, started.
584 * We have to leave here will all of the soft buffers on the free list,
585 * else the cfg_post() func won't have soft buffers to correctly configure.
587 static int saa7164_encoder_stop_streaming(struct saa7164_port
*port
)
589 struct saa7164_dev
*dev
= port
->dev
;
590 struct saa7164_buffer
*buf
;
591 struct saa7164_user_buffer
*ubuf
;
592 struct list_head
*c
, *n
;
595 dprintk(DBGLVL_ENC
, "%s(port=%d)\n", __func__
, port
->nr
);
597 ret
= saa7164_encoder_pause_port(port
);
598 ret
= saa7164_encoder_acquire_port(port
);
599 ret
= saa7164_encoder_stop_port(port
);
601 dprintk(DBGLVL_ENC
, "%s(port=%d) Hardware stopped\n", __func__
,
604 /* Reset the state of any allocated buffer resources */
605 mutex_lock(&port
->dmaqueue_lock
);
607 /* Reset the hard and soft buffer state */
608 list_for_each_safe(c
, n
, &port
->dmaqueue
.list
) {
609 buf
= list_entry(c
, struct saa7164_buffer
, list
);
610 buf
->flags
= SAA7164_BUFFER_FREE
;
614 list_for_each_safe(c
, n
, &port
->list_buf_used
.list
) {
615 ubuf
= list_entry(c
, struct saa7164_user_buffer
, list
);
617 list_move_tail(&ubuf
->list
, &port
->list_buf_free
.list
);
620 mutex_unlock(&port
->dmaqueue_lock
);
622 /* Free any allocated resources */
623 saa7164_encoder_buffers_dealloc(port
);
625 dprintk(DBGLVL_ENC
, "%s(port=%d) Released\n", __func__
, port
->nr
);
630 static int saa7164_encoder_start_streaming(struct saa7164_port
*port
)
632 struct saa7164_dev
*dev
= port
->dev
;
635 dprintk(DBGLVL_ENC
, "%s(port=%d)\n", __func__
, port
->nr
);
637 port
->done_first_interrupt
= 0;
639 /* allocate all of the PCIe DMA buffer resources on the fly,
640 * allowing switching between TS and PS payloads without
641 * requiring a complete driver reload.
643 saa7164_encoder_buffers_alloc(port
);
645 /* Configure the encoder with any cache values */
646 saa7164_api_set_encoder(port
);
647 saa7164_api_get_encoder(port
);
649 /* Place the empty buffers on the hardware */
650 saa7164_buffer_cfg_port(port
);
652 /* Acquire the hardware */
653 result
= saa7164_api_transition_port(port
, SAA_DMASTATE_ACQUIRE
);
654 if ((result
!= SAA_OK
) && (result
!= SAA_ERR_ALREADY_STOPPED
)) {
655 printk(KERN_ERR
"%s() acquire transition failed, res = 0x%x\n",
658 /* Stop the hardware, regardless */
659 result
= saa7164_api_transition_port(port
, SAA_DMASTATE_STOP
);
660 if ((result
!= SAA_OK
) && (result
!= SAA_ERR_ALREADY_STOPPED
)) {
661 printk(KERN_ERR
"%s() acquire/forced stop transition failed, res = 0x%x\n",
667 dprintk(DBGLVL_ENC
, "%s() Acquired\n", __func__
);
669 /* Pause the hardware */
670 result
= saa7164_api_transition_port(port
, SAA_DMASTATE_PAUSE
);
671 if ((result
!= SAA_OK
) && (result
!= SAA_ERR_ALREADY_STOPPED
)) {
672 printk(KERN_ERR
"%s() pause transition failed, res = 0x%x\n",
675 /* Stop the hardware, regardless */
676 result
= saa7164_api_transition_port(port
, SAA_DMASTATE_STOP
);
677 if ((result
!= SAA_OK
) && (result
!= SAA_ERR_ALREADY_STOPPED
)) {
678 printk(KERN_ERR
"%s() pause/forced stop transition failed, res = 0x%x\n",
685 dprintk(DBGLVL_ENC
, "%s() Paused\n", __func__
);
687 /* Start the hardware */
688 result
= saa7164_api_transition_port(port
, SAA_DMASTATE_RUN
);
689 if ((result
!= SAA_OK
) && (result
!= SAA_ERR_ALREADY_STOPPED
)) {
690 printk(KERN_ERR
"%s() run transition failed, result = 0x%x\n",
693 /* Stop the hardware, regardless */
694 result
= saa7164_api_transition_port(port
, SAA_DMASTATE_STOP
);
695 if ((result
!= SAA_OK
) && (result
!= SAA_ERR_ALREADY_STOPPED
)) {
696 printk(KERN_ERR
"%s() run/forced stop transition failed, res = 0x%x\n",
702 dprintk(DBGLVL_ENC
, "%s() Running\n", __func__
);
708 static int fops_open(struct file
*file
)
710 struct saa7164_dev
*dev
;
711 struct saa7164_port
*port
;
712 struct saa7164_encoder_fh
*fh
;
714 port
= (struct saa7164_port
*)video_get_drvdata(video_devdata(file
));
720 dprintk(DBGLVL_ENC
, "%s()\n", __func__
);
722 /* allocate + initialize per filehandle data */
723 fh
= kzalloc(sizeof(*fh
), GFP_KERNEL
);
728 v4l2_fh_init(&fh
->fh
, video_devdata(file
));
729 v4l2_fh_add(&fh
->fh
);
730 file
->private_data
= fh
;
735 static int fops_release(struct file
*file
)
737 struct saa7164_encoder_fh
*fh
= file
->private_data
;
738 struct saa7164_port
*port
= fh
->port
;
739 struct saa7164_dev
*dev
= port
->dev
;
741 dprintk(DBGLVL_ENC
, "%s()\n", __func__
);
743 /* Shut device down on last close */
744 if (atomic_cmpxchg(&fh
->v4l_reading
, 1, 0) == 1) {
745 if (atomic_dec_return(&port
->v4l_reader_count
) == 0) {
746 /* stop mpeg capture then cancel buffers */
747 saa7164_encoder_stop_streaming(port
);
751 v4l2_fh_del(&fh
->fh
);
752 v4l2_fh_exit(&fh
->fh
);
759 saa7164_user_buffer
*saa7164_enc_next_buf(struct saa7164_port
*port
)
761 struct saa7164_user_buffer
*ubuf
= NULL
;
762 struct saa7164_dev
*dev
= port
->dev
;
765 mutex_lock(&port
->dmaqueue_lock
);
766 if (!list_empty(&port
->list_buf_used
.list
)) {
767 ubuf
= list_first_entry(&port
->list_buf_used
.list
,
768 struct saa7164_user_buffer
, list
);
771 crc
= crc32(0, ubuf
->data
, ubuf
->actual_size
);
772 if (crc
!= ubuf
->crc
) {
774 "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n",
776 ubuf
, ubuf
->crc
, crc
);
781 mutex_unlock(&port
->dmaqueue_lock
);
783 dprintk(DBGLVL_ENC
, "%s() returns %p\n", __func__
, ubuf
);
788 static ssize_t
fops_read(struct file
*file
, char __user
*buffer
,
789 size_t count
, loff_t
*pos
)
791 struct saa7164_encoder_fh
*fh
= file
->private_data
;
792 struct saa7164_port
*port
= fh
->port
;
793 struct saa7164_user_buffer
*ubuf
= NULL
;
794 struct saa7164_dev
*dev
= port
->dev
;
799 port
->last_read_msecs_diff
= port
->last_read_msecs
;
800 port
->last_read_msecs
= jiffies_to_msecs(jiffies
);
801 port
->last_read_msecs_diff
= port
->last_read_msecs
-
802 port
->last_read_msecs_diff
;
804 saa7164_histogram_update(&port
->read_interval
,
805 port
->last_read_msecs_diff
);
808 printk(KERN_ERR
"%s() ESPIPE\n", __func__
);
812 if (atomic_cmpxchg(&fh
->v4l_reading
, 0, 1) == 0) {
813 if (atomic_inc_return(&port
->v4l_reader_count
) == 1) {
815 if (saa7164_encoder_initialize(port
) < 0) {
816 printk(KERN_ERR
"%s() EINVAL\n", __func__
);
820 saa7164_encoder_start_streaming(port
);
825 /* blocking wait for buffer */
826 if ((file
->f_flags
& O_NONBLOCK
) == 0) {
827 if (wait_event_interruptible(port
->wait_read
,
828 saa7164_enc_next_buf(port
))) {
829 printk(KERN_ERR
"%s() ERESTARTSYS\n", __func__
);
834 /* Pull the first buffer from the used list */
835 ubuf
= saa7164_enc_next_buf(port
);
837 while ((count
> 0) && ubuf
) {
839 /* set remaining bytes to copy */
840 rem
= ubuf
->actual_size
- ubuf
->pos
;
841 cnt
= rem
> count
? count
: rem
;
843 p
= ubuf
->data
+ ubuf
->pos
;
846 "%s() count=%d cnt=%d rem=%d buf=%p buf->pos=%d\n",
847 __func__
, (int)count
, cnt
, rem
, ubuf
, ubuf
->pos
);
849 if (copy_to_user(buffer
, p
, cnt
)) {
850 printk(KERN_ERR
"%s() copy_to_user failed\n", __func__
);
852 printk(KERN_ERR
"%s() EFAULT\n", __func__
);
863 if (ubuf
->pos
> ubuf
->actual_size
)
864 printk(KERN_ERR
"read() pos > actual, huh?\n");
866 if (ubuf
->pos
== ubuf
->actual_size
) {
868 /* finished with current buffer, take next buffer */
870 /* Requeue the buffer on the free list */
873 mutex_lock(&port
->dmaqueue_lock
);
874 list_move_tail(&ubuf
->list
, &port
->list_buf_free
.list
);
875 mutex_unlock(&port
->dmaqueue_lock
);
878 if ((file
->f_flags
& O_NONBLOCK
) == 0) {
879 if (wait_event_interruptible(port
->wait_read
,
880 saa7164_enc_next_buf(port
))) {
884 ubuf
= saa7164_enc_next_buf(port
);
894 static __poll_t
fops_poll(struct file
*file
, poll_table
*wait
)
896 __poll_t req_events
= poll_requested_events(wait
);
897 struct saa7164_encoder_fh
*fh
=
898 (struct saa7164_encoder_fh
*)file
->private_data
;
899 struct saa7164_port
*port
= fh
->port
;
900 __poll_t mask
= v4l2_ctrl_poll(file
, wait
);
902 port
->last_poll_msecs_diff
= port
->last_poll_msecs
;
903 port
->last_poll_msecs
= jiffies_to_msecs(jiffies
);
904 port
->last_poll_msecs_diff
= port
->last_poll_msecs
-
905 port
->last_poll_msecs_diff
;
907 saa7164_histogram_update(&port
->poll_interval
,
908 port
->last_poll_msecs_diff
);
910 if (!(req_events
& (EPOLLIN
| EPOLLRDNORM
)))
913 if (atomic_cmpxchg(&fh
->v4l_reading
, 0, 1) == 0) {
914 if (atomic_inc_return(&port
->v4l_reader_count
) == 1) {
915 if (saa7164_encoder_initialize(port
) < 0)
916 return mask
| EPOLLERR
;
917 saa7164_encoder_start_streaming(port
);
922 /* Pull the first buffer from the used list */
923 if (!list_empty(&port
->list_buf_used
.list
))
924 mask
|= EPOLLIN
| EPOLLRDNORM
;
929 static const struct v4l2_ctrl_ops saa7164_ctrl_ops
= {
930 .s_ctrl
= saa7164_s_ctrl
,
933 static const struct v4l2_file_operations mpeg_fops
= {
934 .owner
= THIS_MODULE
,
936 .release
= fops_release
,
939 .unlocked_ioctl
= video_ioctl2
,
942 static const struct v4l2_ioctl_ops mpeg_ioctl_ops
= {
943 .vidioc_s_std
= vidioc_s_std
,
944 .vidioc_g_std
= vidioc_g_std
,
945 .vidioc_enum_input
= saa7164_enum_input
,
946 .vidioc_g_input
= vidioc_g_input
,
947 .vidioc_s_input
= vidioc_s_input
,
948 .vidioc_g_tuner
= saa7164_g_tuner
,
949 .vidioc_s_tuner
= saa7164_s_tuner
,
950 .vidioc_g_frequency
= vidioc_g_frequency
,
951 .vidioc_s_frequency
= vidioc_s_frequency
,
952 .vidioc_querycap
= vidioc_querycap
,
953 .vidioc_enum_fmt_vid_cap
= vidioc_enum_fmt_vid_cap
,
954 .vidioc_g_fmt_vid_cap
= vidioc_fmt_vid_cap
,
955 .vidioc_try_fmt_vid_cap
= vidioc_fmt_vid_cap
,
956 .vidioc_s_fmt_vid_cap
= vidioc_fmt_vid_cap
,
957 .vidioc_log_status
= v4l2_ctrl_log_status
,
958 .vidioc_subscribe_event
= v4l2_ctrl_subscribe_event
,
959 .vidioc_unsubscribe_event
= v4l2_event_unsubscribe
,
962 static struct video_device saa7164_mpeg_template
= {
965 .ioctl_ops
= &mpeg_ioctl_ops
,
967 .tvnorms
= SAA7164_NORMS
,
968 .device_caps
= V4L2_CAP_VIDEO_CAPTURE
| V4L2_CAP_READWRITE
|
972 static struct video_device
*saa7164_encoder_alloc(
973 struct saa7164_port
*port
,
975 struct video_device
*template,
978 struct video_device
*vfd
;
979 struct saa7164_dev
*dev
= port
->dev
;
981 dprintk(DBGLVL_ENC
, "%s()\n", __func__
);
983 vfd
= video_device_alloc();
988 snprintf(vfd
->name
, sizeof(vfd
->name
), "%s %s (%s)", dev
->name
,
989 type
, saa7164_boards
[dev
->board
].name
);
991 vfd
->v4l2_dev
= &dev
->v4l2_dev
;
992 vfd
->release
= video_device_release
;
996 int saa7164_encoder_register(struct saa7164_port
*port
)
998 struct saa7164_dev
*dev
= port
->dev
;
999 struct v4l2_ctrl_handler
*hdl
= &port
->ctrl_handler
;
1000 int result
= -ENODEV
;
1002 dprintk(DBGLVL_ENC
, "%s()\n", __func__
);
1004 BUG_ON(port
->type
!= SAA7164_MPEG_ENCODER
);
1006 /* Sanity check that the PCI configuration space is active */
1007 if (port
->hwcfg
.BARLocation
== 0) {
1008 printk(KERN_ERR
"%s() failed (errno = %d), NO PCI configuration\n",
1014 /* Establish encoder defaults here */
1015 /* Set default TV standard */
1016 port
->encodernorm
= saa7164_tvnorms
[0];
1018 port
->mux_input
= 1; /* Composite */
1019 port
->video_format
= EU_VIDEO_FORMAT_MPEG_2
;
1020 port
->audio_format
= 0;
1021 port
->video_resolution
= 0;
1022 port
->freq
= SAA7164_TV_MIN_FREQ
;
1024 v4l2_ctrl_handler_init(hdl
, 14);
1025 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1026 V4L2_CID_BRIGHTNESS
, 0, 255, 1, 127);
1027 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1028 V4L2_CID_CONTRAST
, 0, 255, 1, 66);
1029 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1030 V4L2_CID_SATURATION
, 0, 255, 1, 62);
1031 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1032 V4L2_CID_HUE
, 0, 255, 1, 128);
1033 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1034 V4L2_CID_SHARPNESS
, 0x0, 0x0f, 1, 8);
1035 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1036 V4L2_CID_MPEG_AUDIO_MUTE
, 0x0, 0x01, 1, 0);
1037 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1038 V4L2_CID_AUDIO_VOLUME
, -83, 24, 1, 20);
1039 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1040 V4L2_CID_MPEG_VIDEO_BITRATE
,
1041 ENCODER_MIN_BITRATE
, ENCODER_MAX_BITRATE
,
1042 100000, ENCODER_DEF_BITRATE
);
1043 v4l2_ctrl_new_std_menu(hdl
, &saa7164_ctrl_ops
,
1044 V4L2_CID_MPEG_STREAM_TYPE
,
1045 V4L2_MPEG_STREAM_TYPE_MPEG2_TS
, 0,
1046 V4L2_MPEG_STREAM_TYPE_MPEG2_PS
);
1047 v4l2_ctrl_new_std_menu(hdl
, &saa7164_ctrl_ops
,
1048 V4L2_CID_MPEG_VIDEO_ASPECT
,
1049 V4L2_MPEG_VIDEO_ASPECT_221x100
, 0,
1050 V4L2_MPEG_VIDEO_ASPECT_4x3
);
1051 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1052 V4L2_CID_MPEG_VIDEO_GOP_SIZE
, 1, 255, 1, 15);
1053 v4l2_ctrl_new_std_menu(hdl
, &saa7164_ctrl_ops
,
1054 V4L2_CID_MPEG_VIDEO_BITRATE_MODE
,
1055 V4L2_MPEG_VIDEO_BITRATE_MODE_CBR
, 0,
1056 V4L2_MPEG_VIDEO_BITRATE_MODE_VBR
);
1057 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1058 V4L2_CID_MPEG_VIDEO_B_FRAMES
, 1, 3, 1, 1);
1059 v4l2_ctrl_new_std(hdl
, &saa7164_ctrl_ops
,
1060 V4L2_CID_MPEG_VIDEO_BITRATE_PEAK
,
1061 ENCODER_MIN_BITRATE
, ENCODER_MAX_BITRATE
,
1062 100000, ENCODER_DEF_BITRATE
);
1064 result
= hdl
->error
;
1068 port
->std
= V4L2_STD_NTSC_M
;
1070 if (port
->encodernorm
.id
& V4L2_STD_525_60
)
1075 /* Allocate and register the video device node */
1076 port
->v4l_device
= saa7164_encoder_alloc(port
,
1077 dev
->pci
, &saa7164_mpeg_template
, "mpeg");
1079 if (!port
->v4l_device
) {
1080 printk(KERN_INFO
"%s: can't allocate mpeg device\n",
1086 port
->v4l_device
->ctrl_handler
= hdl
;
1087 v4l2_ctrl_handler_setup(hdl
);
1088 video_set_drvdata(port
->v4l_device
, port
);
1089 result
= video_register_device(port
->v4l_device
,
1090 VFL_TYPE_VIDEO
, -1);
1092 printk(KERN_INFO
"%s: can't register mpeg device\n",
1094 /* TODO: We're going to leak here if we don't dealloc
1095 The buffers above. The unreg function can't deal wit it.
1100 printk(KERN_INFO
"%s: registered device video%d [mpeg]\n",
1101 dev
->name
, port
->v4l_device
->num
);
1103 /* Configure the hardware defaults */
1104 saa7164_api_set_videomux(port
);
1105 saa7164_api_set_usercontrol(port
, PU_BRIGHTNESS_CONTROL
);
1106 saa7164_api_set_usercontrol(port
, PU_CONTRAST_CONTROL
);
1107 saa7164_api_set_usercontrol(port
, PU_HUE_CONTROL
);
1108 saa7164_api_set_usercontrol(port
, PU_SATURATION_CONTROL
);
1109 saa7164_api_set_usercontrol(port
, PU_SHARPNESS_CONTROL
);
1110 saa7164_api_audio_mute(port
, 0);
1111 saa7164_api_set_audio_volume(port
, 20);
1112 saa7164_api_set_aspect_ratio(port
);
1114 /* Disable audio standard detection, it's buggy */
1115 saa7164_api_set_audio_detection(port
, 0);
1117 saa7164_api_set_encoder(port
);
1118 saa7164_api_get_encoder(port
);
1125 void saa7164_encoder_unregister(struct saa7164_port
*port
)
1127 struct saa7164_dev
*dev
= port
->dev
;
1129 dprintk(DBGLVL_ENC
, "%s(port=%d)\n", __func__
, port
->nr
);
1131 BUG_ON(port
->type
!= SAA7164_MPEG_ENCODER
);
1133 if (port
->v4l_device
) {
1134 if (port
->v4l_device
->minor
!= -1)
1135 video_unregister_device(port
->v4l_device
);
1137 video_device_release(port
->v4l_device
);
1139 port
->v4l_device
= NULL
;
1141 v4l2_ctrl_handler_free(&port
->ctrl_handler
);
1143 dprintk(DBGLVL_ENC
, "%s(port=%d) done\n", __func__
, port
->nr
);