2 * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
4 * Written 1994-1999 by Avery Pennarun.
5 * Derived from skeleton.c by Donald Becker.
7 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8 * for sponsoring the further development of this driver.
10 * **********************
12 * The original copyright of skeleton.c was as follows:
14 * skeleton.c Written 1993 by Donald Becker.
15 * Copyright 1993 United States Government as represented by the
16 * Director, National Security Agency. This software may only be used
17 * and distributed according to the terms of the GNU General Public License as
18 * modified by SRC, incorporated herein by reference.
20 * **********************
22 * For more details, see drivers/net/arcnet.c
24 * **********************
27 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
29 #include <linux/module.h>
30 #include <linux/gfp.h>
31 #include <linux/init.h>
32 #include <linux/if_arp.h>
34 #include <linux/netdevice.h>
35 #include <linux/skbuff.h>
37 #include "arcdevice.h"
39 static __be16
type_trans(struct sk_buff
*skb
, struct net_device
*dev
);
40 static void rx(struct net_device
*dev
, int bufnum
,
41 struct archdr
*pkthdr
, int length
);
42 static int build_header(struct sk_buff
*skb
, struct net_device
*dev
,
43 unsigned short type
, uint8_t daddr
);
44 static int prepare_tx(struct net_device
*dev
, struct archdr
*pkt
, int length
,
47 static struct ArcProto rfc1051_proto
= {
49 .mtu
= XMTU
- RFC1051_HDR_SIZE
,
52 .build_header
= build_header
,
53 .prepare_tx
= prepare_tx
,
58 static int __init
arcnet_rfc1051_init(void)
60 pr_info("%s\n", "RFC1051 \"simple standard\" (`s') encapsulation support loaded");
62 arc_proto_map
[ARC_P_IP_RFC1051
]
63 = arc_proto_map
[ARC_P_ARP_RFC1051
]
66 /* if someone else already owns the broadcast, we won't take it */
67 if (arc_bcast_proto
== arc_proto_default
)
68 arc_bcast_proto
= &rfc1051_proto
;
73 static void __exit
arcnet_rfc1051_exit(void)
75 arcnet_unregister_proto(&rfc1051_proto
);
78 module_init(arcnet_rfc1051_init
);
79 module_exit(arcnet_rfc1051_exit
);
81 MODULE_LICENSE("GPL");
83 /* Determine a packet's protocol ID.
85 * With ARCnet we have to convert everything to Ethernet-style stuff.
87 static __be16
type_trans(struct sk_buff
*skb
, struct net_device
*dev
)
89 struct archdr
*pkt
= (struct archdr
*)skb
->data
;
90 struct arc_rfc1051
*soft
= &pkt
->soft
.rfc1051
;
91 int hdr_size
= ARC_HDR_SIZE
+ RFC1051_HDR_SIZE
;
93 /* Pull off the arcnet header. */
94 skb_reset_mac_header(skb
);
95 skb_pull(skb
, hdr_size
);
97 if (pkt
->hard
.dest
== 0) {
98 skb
->pkt_type
= PACKET_BROADCAST
;
99 } else if (dev
->flags
& IFF_PROMISC
) {
100 /* if we're not sending to ourselves :) */
101 if (pkt
->hard
.dest
!= dev
->dev_addr
[0])
102 skb
->pkt_type
= PACKET_OTHERHOST
;
104 /* now return the protocol number */
105 switch (soft
->proto
) {
106 case ARC_P_IP_RFC1051
:
107 return htons(ETH_P_IP
);
108 case ARC_P_ARP_RFC1051
:
109 return htons(ETH_P_ARP
);
112 dev
->stats
.rx_errors
++;
113 dev
->stats
.rx_crc_errors
++;
117 return htons(ETH_P_IP
);
120 /* packet receiver */
121 static void rx(struct net_device
*dev
, int bufnum
,
122 struct archdr
*pkthdr
, int length
)
124 struct arcnet_local
*lp
= netdev_priv(dev
);
126 struct archdr
*pkt
= pkthdr
;
129 arc_printk(D_DURING
, dev
, "it's a raw packet (length=%d)\n", length
);
136 skb
= alloc_skb(length
+ ARC_HDR_SIZE
, GFP_ATOMIC
);
138 dev
->stats
.rx_dropped
++;
141 skb_put(skb
, length
+ ARC_HDR_SIZE
);
144 pkt
= (struct archdr
*)skb
->data
;
146 /* up to sizeof(pkt->soft) has already been copied from the card */
147 memcpy(pkt
, pkthdr
, sizeof(struct archdr
));
148 if (length
> sizeof(pkt
->soft
))
149 lp
->hw
.copy_from_card(dev
, bufnum
, ofs
+ sizeof(pkt
->soft
),
150 pkt
->soft
.raw
+ sizeof(pkt
->soft
),
151 length
- sizeof(pkt
->soft
));
154 arcnet_dump_skb(dev
, skb
, "rx");
156 skb
->protocol
= type_trans(skb
, dev
);
160 /* Create the ARCnet hard/soft headers for RFC1051 */
161 static int build_header(struct sk_buff
*skb
, struct net_device
*dev
,
162 unsigned short type
, uint8_t daddr
)
164 int hdr_size
= ARC_HDR_SIZE
+ RFC1051_HDR_SIZE
;
165 struct archdr
*pkt
= skb_push(skb
, hdr_size
);
166 struct arc_rfc1051
*soft
= &pkt
->soft
.rfc1051
;
168 /* set the protocol ID according to RFC1051 */
171 soft
->proto
= ARC_P_IP_RFC1051
;
174 soft
->proto
= ARC_P_ARP_RFC1051
;
177 arc_printk(D_NORMAL
, dev
, "RFC1051: I don't understand protocol %d (%Xh)\n",
179 dev
->stats
.tx_errors
++;
180 dev
->stats
.tx_aborted_errors
++;
184 /* Set the source hardware address.
186 * This is pretty pointless for most purposes, but it can help in
187 * debugging. ARCnet does not allow us to change the source address
188 * in the actual packet sent.
190 pkt
->hard
.source
= *dev
->dev_addr
;
192 /* see linux/net/ethernet/eth.c to see where I got the following */
194 if (dev
->flags
& (IFF_LOOPBACK
| IFF_NOARP
)) {
195 /* FIXME: fill in the last byte of the dest ipaddr here to
196 * better comply with RFC1051 in "noarp" mode.
201 /* otherwise, just fill it in and go! */
202 pkt
->hard
.dest
= daddr
;
204 return hdr_size
; /* success */
207 static int prepare_tx(struct net_device
*dev
, struct archdr
*pkt
, int length
,
210 struct arcnet_local
*lp
= netdev_priv(dev
);
211 struct arc_hardware
*hard
= &pkt
->hard
;
214 arc_printk(D_DURING
, dev
, "prepare_tx: txbufs=%d/%d/%d\n",
215 lp
->next_tx
, lp
->cur_tx
, bufnum
);
217 /* hard header is not included in packet length */
218 length
-= ARC_HDR_SIZE
;
221 /* should never happen! other people already check for this. */
222 arc_printk(D_NORMAL
, dev
, "Bug! prepare_tx with size %d (> %d)\n",
226 if (length
> MinTU
) {
228 hard
->offset
[1] = ofs
= 512 - length
;
229 } else if (length
> MTU
) {
231 hard
->offset
[1] = ofs
= 512 - length
- 3;
233 hard
->offset
[0] = ofs
= 256 - length
;
236 lp
->hw
.copy_to_card(dev
, bufnum
, 0, hard
, ARC_HDR_SIZE
);
237 lp
->hw
.copy_to_card(dev
, bufnum
, ofs
, &pkt
->soft
, length
);
239 lp
->lastload_dest
= hard
->dest
;