1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2005 - 2016 Broadcom
7 * linux-drivers@emulex.com
11 * Costa Mesa, CA 92626
14 #include <linux/prefetch.h>
15 #include <linux/module.h>
18 #include <asm/div64.h>
19 #include <linux/aer.h>
20 #include <linux/if_bridge.h>
21 #include <net/busy_poll.h>
22 #include <net/vxlan.h>
24 MODULE_DESCRIPTION(DRV_DESC
);
25 MODULE_AUTHOR("Emulex Corporation");
26 MODULE_LICENSE("GPL");
28 /* num_vfs module param is obsolete.
29 * Use sysfs method to enable/disable VFs.
31 static unsigned int num_vfs
;
32 module_param(num_vfs
, uint
, 0444);
33 MODULE_PARM_DESC(num_vfs
, "Number of PCI VFs to initialize");
35 static ushort rx_frag_size
= 2048;
36 module_param(rx_frag_size
, ushort
, 0444);
37 MODULE_PARM_DESC(rx_frag_size
, "Size of a fragment that holds rcvd data.");
39 /* Per-module error detection/recovery workq shared across all functions.
40 * Each function schedules its own work request on this shared workq.
42 static struct workqueue_struct
*be_err_recovery_workq
;
44 static const struct pci_device_id be_dev_ids
[] = {
45 #ifdef CONFIG_BE2NET_BE2
46 { PCI_DEVICE(BE_VENDOR_ID
, BE_DEVICE_ID1
) },
47 { PCI_DEVICE(BE_VENDOR_ID
, OC_DEVICE_ID1
) },
48 #endif /* CONFIG_BE2NET_BE2 */
49 #ifdef CONFIG_BE2NET_BE3
50 { PCI_DEVICE(BE_VENDOR_ID
, BE_DEVICE_ID2
) },
51 { PCI_DEVICE(BE_VENDOR_ID
, OC_DEVICE_ID2
) },
52 #endif /* CONFIG_BE2NET_BE3 */
53 #ifdef CONFIG_BE2NET_LANCER
54 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID3
)},
55 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID4
)},
56 #endif /* CONFIG_BE2NET_LANCER */
57 #ifdef CONFIG_BE2NET_SKYHAWK
58 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID5
)},
59 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID6
)},
60 #endif /* CONFIG_BE2NET_SKYHAWK */
63 MODULE_DEVICE_TABLE(pci
, be_dev_ids
);
65 /* Workqueue used by all functions for defering cmd calls to the adapter */
66 static struct workqueue_struct
*be_wq
;
68 /* UE Status Low CSR */
69 static const char * const ue_status_low_desc
[] = {
104 /* UE Status High CSR */
105 static const char * const ue_status_hi_desc
[] = {
140 #define BE_VF_IF_EN_FLAGS (BE_IF_FLAGS_UNTAGGED | \
141 BE_IF_FLAGS_BROADCAST | \
142 BE_IF_FLAGS_MULTICAST | \
143 BE_IF_FLAGS_PASS_L3L4_ERRORS)
145 static void be_queue_free(struct be_adapter
*adapter
, struct be_queue_info
*q
)
147 struct be_dma_mem
*mem
= &q
->dma_mem
;
150 dma_free_coherent(&adapter
->pdev
->dev
, mem
->size
, mem
->va
,
156 static int be_queue_alloc(struct be_adapter
*adapter
, struct be_queue_info
*q
,
157 u16 len
, u16 entry_size
)
159 struct be_dma_mem
*mem
= &q
->dma_mem
;
161 memset(q
, 0, sizeof(*q
));
163 q
->entry_size
= entry_size
;
164 mem
->size
= len
* entry_size
;
165 mem
->va
= dma_alloc_coherent(&adapter
->pdev
->dev
, mem
->size
,
166 &mem
->dma
, GFP_KERNEL
);
172 static void be_reg_intr_set(struct be_adapter
*adapter
, bool enable
)
176 pci_read_config_dword(adapter
->pdev
, PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET
,
178 enabled
= reg
& MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK
;
180 if (!enabled
&& enable
)
181 reg
|= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK
;
182 else if (enabled
&& !enable
)
183 reg
&= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK
;
187 pci_write_config_dword(adapter
->pdev
,
188 PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET
, reg
);
191 static void be_intr_set(struct be_adapter
*adapter
, bool enable
)
195 /* On lancer interrupts can't be controlled via this register */
196 if (lancer_chip(adapter
))
199 if (be_check_error(adapter
, BE_ERROR_EEH
))
202 status
= be_cmd_intr_set(adapter
, enable
);
204 be_reg_intr_set(adapter
, enable
);
207 static void be_rxq_notify(struct be_adapter
*adapter
, u16 qid
, u16 posted
)
211 if (be_check_error(adapter
, BE_ERROR_HW
))
214 val
|= qid
& DB_RQ_RING_ID_MASK
;
215 val
|= posted
<< DB_RQ_NUM_POSTED_SHIFT
;
218 iowrite32(val
, adapter
->db
+ DB_RQ_OFFSET
);
221 static void be_txq_notify(struct be_adapter
*adapter
, struct be_tx_obj
*txo
,
226 if (be_check_error(adapter
, BE_ERROR_HW
))
229 val
|= txo
->q
.id
& DB_TXULP_RING_ID_MASK
;
230 val
|= (posted
& DB_TXULP_NUM_POSTED_MASK
) << DB_TXULP_NUM_POSTED_SHIFT
;
233 iowrite32(val
, adapter
->db
+ txo
->db_offset
);
236 static void be_eq_notify(struct be_adapter
*adapter
, u16 qid
,
237 bool arm
, bool clear_int
, u16 num_popped
,
238 u32 eq_delay_mult_enc
)
242 val
|= qid
& DB_EQ_RING_ID_MASK
;
243 val
|= ((qid
& DB_EQ_RING_ID_EXT_MASK
) << DB_EQ_RING_ID_EXT_MASK_SHIFT
);
245 if (be_check_error(adapter
, BE_ERROR_HW
))
249 val
|= 1 << DB_EQ_REARM_SHIFT
;
251 val
|= 1 << DB_EQ_CLR_SHIFT
;
252 val
|= 1 << DB_EQ_EVNT_SHIFT
;
253 val
|= num_popped
<< DB_EQ_NUM_POPPED_SHIFT
;
254 val
|= eq_delay_mult_enc
<< DB_EQ_R2I_DLY_SHIFT
;
255 iowrite32(val
, adapter
->db
+ DB_EQ_OFFSET
);
258 void be_cq_notify(struct be_adapter
*adapter
, u16 qid
, bool arm
, u16 num_popped
)
262 val
|= qid
& DB_CQ_RING_ID_MASK
;
263 val
|= ((qid
& DB_CQ_RING_ID_EXT_MASK
) <<
264 DB_CQ_RING_ID_EXT_MASK_SHIFT
);
266 if (be_check_error(adapter
, BE_ERROR_HW
))
270 val
|= 1 << DB_CQ_REARM_SHIFT
;
271 val
|= num_popped
<< DB_CQ_NUM_POPPED_SHIFT
;
272 iowrite32(val
, adapter
->db
+ DB_CQ_OFFSET
);
275 static int be_dev_mac_add(struct be_adapter
*adapter
, u8
*mac
)
279 /* Check if mac has already been added as part of uc-list */
280 for (i
= 0; i
< adapter
->uc_macs
; i
++) {
281 if (ether_addr_equal(adapter
->uc_list
[i
].mac
, mac
)) {
282 /* mac already added, skip addition */
283 adapter
->pmac_id
[0] = adapter
->pmac_id
[i
+ 1];
288 return be_cmd_pmac_add(adapter
, mac
, adapter
->if_handle
,
289 &adapter
->pmac_id
[0], 0);
292 static void be_dev_mac_del(struct be_adapter
*adapter
, int pmac_id
)
296 /* Skip deletion if the programmed mac is
297 * being used in uc-list
299 for (i
= 0; i
< adapter
->uc_macs
; i
++) {
300 if (adapter
->pmac_id
[i
+ 1] == pmac_id
)
303 be_cmd_pmac_del(adapter
, adapter
->if_handle
, pmac_id
, 0);
306 static int be_mac_addr_set(struct net_device
*netdev
, void *p
)
308 struct be_adapter
*adapter
= netdev_priv(netdev
);
309 struct device
*dev
= &adapter
->pdev
->dev
;
310 struct sockaddr
*addr
= p
;
313 u32 old_pmac_id
= adapter
->pmac_id
[0];
315 if (!is_valid_ether_addr(addr
->sa_data
))
316 return -EADDRNOTAVAIL
;
318 /* Proceed further only if, User provided MAC is different
321 if (ether_addr_equal(addr
->sa_data
, adapter
->dev_mac
))
324 /* BE3 VFs without FILTMGMT privilege are not allowed to set its MAC
327 if (BEx_chip(adapter
) && be_virtfn(adapter
) &&
328 !check_privilege(adapter
, BE_PRIV_FILTMGMT
))
331 /* if device is not running, copy MAC to netdev->dev_addr */
332 if (!netif_running(netdev
))
335 /* The PMAC_ADD cmd may fail if the VF doesn't have FILTMGMT
336 * privilege or if PF did not provision the new MAC address.
337 * On BE3, this cmd will always fail if the VF doesn't have the
338 * FILTMGMT privilege. This failure is OK, only if the PF programmed
339 * the MAC for the VF.
341 mutex_lock(&adapter
->rx_filter_lock
);
342 status
= be_dev_mac_add(adapter
, (u8
*)addr
->sa_data
);
345 /* Delete the old programmed MAC. This call may fail if the
346 * old MAC was already deleted by the PF driver.
348 if (adapter
->pmac_id
[0] != old_pmac_id
)
349 be_dev_mac_del(adapter
, old_pmac_id
);
352 mutex_unlock(&adapter
->rx_filter_lock
);
353 /* Decide if the new MAC is successfully activated only after
356 status
= be_cmd_get_active_mac(adapter
, adapter
->pmac_id
[0], mac
,
357 adapter
->if_handle
, true, 0);
361 /* The MAC change did not happen, either due to lack of privilege
362 * or PF didn't pre-provision.
364 if (!ether_addr_equal(addr
->sa_data
, mac
)) {
369 /* Remember currently programmed MAC */
370 ether_addr_copy(adapter
->dev_mac
, addr
->sa_data
);
372 ether_addr_copy(netdev
->dev_addr
, addr
->sa_data
);
373 dev_info(dev
, "MAC address changed to %pM\n", addr
->sa_data
);
376 dev_warn(dev
, "MAC address change to %pM failed\n", addr
->sa_data
);
380 /* BE2 supports only v0 cmd */
381 static void *hw_stats_from_cmd(struct be_adapter
*adapter
)
383 if (BE2_chip(adapter
)) {
384 struct be_cmd_resp_get_stats_v0
*cmd
= adapter
->stats_cmd
.va
;
386 return &cmd
->hw_stats
;
387 } else if (BE3_chip(adapter
)) {
388 struct be_cmd_resp_get_stats_v1
*cmd
= adapter
->stats_cmd
.va
;
390 return &cmd
->hw_stats
;
392 struct be_cmd_resp_get_stats_v2
*cmd
= adapter
->stats_cmd
.va
;
394 return &cmd
->hw_stats
;
398 /* BE2 supports only v0 cmd */
399 static void *be_erx_stats_from_cmd(struct be_adapter
*adapter
)
401 if (BE2_chip(adapter
)) {
402 struct be_hw_stats_v0
*hw_stats
= hw_stats_from_cmd(adapter
);
404 return &hw_stats
->erx
;
405 } else if (BE3_chip(adapter
)) {
406 struct be_hw_stats_v1
*hw_stats
= hw_stats_from_cmd(adapter
);
408 return &hw_stats
->erx
;
410 struct be_hw_stats_v2
*hw_stats
= hw_stats_from_cmd(adapter
);
412 return &hw_stats
->erx
;
416 static void populate_be_v0_stats(struct be_adapter
*adapter
)
418 struct be_hw_stats_v0
*hw_stats
= hw_stats_from_cmd(adapter
);
419 struct be_pmem_stats
*pmem_sts
= &hw_stats
->pmem
;
420 struct be_rxf_stats_v0
*rxf_stats
= &hw_stats
->rxf
;
421 struct be_port_rxf_stats_v0
*port_stats
=
422 &rxf_stats
->port
[adapter
->port_num
];
423 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
425 be_dws_le_to_cpu(hw_stats
, sizeof(*hw_stats
));
426 drvs
->rx_pause_frames
= port_stats
->rx_pause_frames
;
427 drvs
->rx_crc_errors
= port_stats
->rx_crc_errors
;
428 drvs
->rx_control_frames
= port_stats
->rx_control_frames
;
429 drvs
->rx_in_range_errors
= port_stats
->rx_in_range_errors
;
430 drvs
->rx_frame_too_long
= port_stats
->rx_frame_too_long
;
431 drvs
->rx_dropped_runt
= port_stats
->rx_dropped_runt
;
432 drvs
->rx_ip_checksum_errs
= port_stats
->rx_ip_checksum_errs
;
433 drvs
->rx_tcp_checksum_errs
= port_stats
->rx_tcp_checksum_errs
;
434 drvs
->rx_udp_checksum_errs
= port_stats
->rx_udp_checksum_errs
;
435 drvs
->rxpp_fifo_overflow_drop
= port_stats
->rx_fifo_overflow
;
436 drvs
->rx_dropped_tcp_length
= port_stats
->rx_dropped_tcp_length
;
437 drvs
->rx_dropped_too_small
= port_stats
->rx_dropped_too_small
;
438 drvs
->rx_dropped_too_short
= port_stats
->rx_dropped_too_short
;
439 drvs
->rx_out_range_errors
= port_stats
->rx_out_range_errors
;
440 drvs
->rx_input_fifo_overflow_drop
= port_stats
->rx_input_fifo_overflow
;
441 drvs
->rx_dropped_header_too_small
=
442 port_stats
->rx_dropped_header_too_small
;
443 drvs
->rx_address_filtered
=
444 port_stats
->rx_address_filtered
+
445 port_stats
->rx_vlan_filtered
;
446 drvs
->rx_alignment_symbol_errors
=
447 port_stats
->rx_alignment_symbol_errors
;
449 drvs
->tx_pauseframes
= port_stats
->tx_pauseframes
;
450 drvs
->tx_controlframes
= port_stats
->tx_controlframes
;
452 if (adapter
->port_num
)
453 drvs
->jabber_events
= rxf_stats
->port1_jabber_events
;
455 drvs
->jabber_events
= rxf_stats
->port0_jabber_events
;
456 drvs
->rx_drops_no_pbuf
= rxf_stats
->rx_drops_no_pbuf
;
457 drvs
->rx_drops_no_erx_descr
= rxf_stats
->rx_drops_no_erx_descr
;
458 drvs
->forwarded_packets
= rxf_stats
->forwarded_packets
;
459 drvs
->rx_drops_mtu
= rxf_stats
->rx_drops_mtu
;
460 drvs
->rx_drops_no_tpre_descr
= rxf_stats
->rx_drops_no_tpre_descr
;
461 drvs
->rx_drops_too_many_frags
= rxf_stats
->rx_drops_too_many_frags
;
462 adapter
->drv_stats
.eth_red_drops
= pmem_sts
->eth_red_drops
;
465 static void populate_be_v1_stats(struct be_adapter
*adapter
)
467 struct be_hw_stats_v1
*hw_stats
= hw_stats_from_cmd(adapter
);
468 struct be_pmem_stats
*pmem_sts
= &hw_stats
->pmem
;
469 struct be_rxf_stats_v1
*rxf_stats
= &hw_stats
->rxf
;
470 struct be_port_rxf_stats_v1
*port_stats
=
471 &rxf_stats
->port
[adapter
->port_num
];
472 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
474 be_dws_le_to_cpu(hw_stats
, sizeof(*hw_stats
));
475 drvs
->pmem_fifo_overflow_drop
= port_stats
->pmem_fifo_overflow_drop
;
476 drvs
->rx_priority_pause_frames
= port_stats
->rx_priority_pause_frames
;
477 drvs
->rx_pause_frames
= port_stats
->rx_pause_frames
;
478 drvs
->rx_crc_errors
= port_stats
->rx_crc_errors
;
479 drvs
->rx_control_frames
= port_stats
->rx_control_frames
;
480 drvs
->rx_in_range_errors
= port_stats
->rx_in_range_errors
;
481 drvs
->rx_frame_too_long
= port_stats
->rx_frame_too_long
;
482 drvs
->rx_dropped_runt
= port_stats
->rx_dropped_runt
;
483 drvs
->rx_ip_checksum_errs
= port_stats
->rx_ip_checksum_errs
;
484 drvs
->rx_tcp_checksum_errs
= port_stats
->rx_tcp_checksum_errs
;
485 drvs
->rx_udp_checksum_errs
= port_stats
->rx_udp_checksum_errs
;
486 drvs
->rx_dropped_tcp_length
= port_stats
->rx_dropped_tcp_length
;
487 drvs
->rx_dropped_too_small
= port_stats
->rx_dropped_too_small
;
488 drvs
->rx_dropped_too_short
= port_stats
->rx_dropped_too_short
;
489 drvs
->rx_out_range_errors
= port_stats
->rx_out_range_errors
;
490 drvs
->rx_dropped_header_too_small
=
491 port_stats
->rx_dropped_header_too_small
;
492 drvs
->rx_input_fifo_overflow_drop
=
493 port_stats
->rx_input_fifo_overflow_drop
;
494 drvs
->rx_address_filtered
= port_stats
->rx_address_filtered
;
495 drvs
->rx_alignment_symbol_errors
=
496 port_stats
->rx_alignment_symbol_errors
;
497 drvs
->rxpp_fifo_overflow_drop
= port_stats
->rxpp_fifo_overflow_drop
;
498 drvs
->tx_pauseframes
= port_stats
->tx_pauseframes
;
499 drvs
->tx_controlframes
= port_stats
->tx_controlframes
;
500 drvs
->tx_priority_pauseframes
= port_stats
->tx_priority_pauseframes
;
501 drvs
->jabber_events
= port_stats
->jabber_events
;
502 drvs
->rx_drops_no_pbuf
= rxf_stats
->rx_drops_no_pbuf
;
503 drvs
->rx_drops_no_erx_descr
= rxf_stats
->rx_drops_no_erx_descr
;
504 drvs
->forwarded_packets
= rxf_stats
->forwarded_packets
;
505 drvs
->rx_drops_mtu
= rxf_stats
->rx_drops_mtu
;
506 drvs
->rx_drops_no_tpre_descr
= rxf_stats
->rx_drops_no_tpre_descr
;
507 drvs
->rx_drops_too_many_frags
= rxf_stats
->rx_drops_too_many_frags
;
508 adapter
->drv_stats
.eth_red_drops
= pmem_sts
->eth_red_drops
;
511 static void populate_be_v2_stats(struct be_adapter
*adapter
)
513 struct be_hw_stats_v2
*hw_stats
= hw_stats_from_cmd(adapter
);
514 struct be_pmem_stats
*pmem_sts
= &hw_stats
->pmem
;
515 struct be_rxf_stats_v2
*rxf_stats
= &hw_stats
->rxf
;
516 struct be_port_rxf_stats_v2
*port_stats
=
517 &rxf_stats
->port
[adapter
->port_num
];
518 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
520 be_dws_le_to_cpu(hw_stats
, sizeof(*hw_stats
));
521 drvs
->pmem_fifo_overflow_drop
= port_stats
->pmem_fifo_overflow_drop
;
522 drvs
->rx_priority_pause_frames
= port_stats
->rx_priority_pause_frames
;
523 drvs
->rx_pause_frames
= port_stats
->rx_pause_frames
;
524 drvs
->rx_crc_errors
= port_stats
->rx_crc_errors
;
525 drvs
->rx_control_frames
= port_stats
->rx_control_frames
;
526 drvs
->rx_in_range_errors
= port_stats
->rx_in_range_errors
;
527 drvs
->rx_frame_too_long
= port_stats
->rx_frame_too_long
;
528 drvs
->rx_dropped_runt
= port_stats
->rx_dropped_runt
;
529 drvs
->rx_ip_checksum_errs
= port_stats
->rx_ip_checksum_errs
;
530 drvs
->rx_tcp_checksum_errs
= port_stats
->rx_tcp_checksum_errs
;
531 drvs
->rx_udp_checksum_errs
= port_stats
->rx_udp_checksum_errs
;
532 drvs
->rx_dropped_tcp_length
= port_stats
->rx_dropped_tcp_length
;
533 drvs
->rx_dropped_too_small
= port_stats
->rx_dropped_too_small
;
534 drvs
->rx_dropped_too_short
= port_stats
->rx_dropped_too_short
;
535 drvs
->rx_out_range_errors
= port_stats
->rx_out_range_errors
;
536 drvs
->rx_dropped_header_too_small
=
537 port_stats
->rx_dropped_header_too_small
;
538 drvs
->rx_input_fifo_overflow_drop
=
539 port_stats
->rx_input_fifo_overflow_drop
;
540 drvs
->rx_address_filtered
= port_stats
->rx_address_filtered
;
541 drvs
->rx_alignment_symbol_errors
=
542 port_stats
->rx_alignment_symbol_errors
;
543 drvs
->rxpp_fifo_overflow_drop
= port_stats
->rxpp_fifo_overflow_drop
;
544 drvs
->tx_pauseframes
= port_stats
->tx_pauseframes
;
545 drvs
->tx_controlframes
= port_stats
->tx_controlframes
;
546 drvs
->tx_priority_pauseframes
= port_stats
->tx_priority_pauseframes
;
547 drvs
->jabber_events
= port_stats
->jabber_events
;
548 drvs
->rx_drops_no_pbuf
= rxf_stats
->rx_drops_no_pbuf
;
549 drvs
->rx_drops_no_erx_descr
= rxf_stats
->rx_drops_no_erx_descr
;
550 drvs
->forwarded_packets
= rxf_stats
->forwarded_packets
;
551 drvs
->rx_drops_mtu
= rxf_stats
->rx_drops_mtu
;
552 drvs
->rx_drops_no_tpre_descr
= rxf_stats
->rx_drops_no_tpre_descr
;
553 drvs
->rx_drops_too_many_frags
= rxf_stats
->rx_drops_too_many_frags
;
554 adapter
->drv_stats
.eth_red_drops
= pmem_sts
->eth_red_drops
;
555 if (be_roce_supported(adapter
)) {
556 drvs
->rx_roce_bytes_lsd
= port_stats
->roce_bytes_received_lsd
;
557 drvs
->rx_roce_bytes_msd
= port_stats
->roce_bytes_received_msd
;
558 drvs
->rx_roce_frames
= port_stats
->roce_frames_received
;
559 drvs
->roce_drops_crc
= port_stats
->roce_drops_crc
;
560 drvs
->roce_drops_payload_len
=
561 port_stats
->roce_drops_payload_len
;
565 static void populate_lancer_stats(struct be_adapter
*adapter
)
567 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
568 struct lancer_pport_stats
*pport_stats
= pport_stats_from_cmd(adapter
);
570 be_dws_le_to_cpu(pport_stats
, sizeof(*pport_stats
));
571 drvs
->rx_pause_frames
= pport_stats
->rx_pause_frames_lo
;
572 drvs
->rx_crc_errors
= pport_stats
->rx_crc_errors_lo
;
573 drvs
->rx_control_frames
= pport_stats
->rx_control_frames_lo
;
574 drvs
->rx_in_range_errors
= pport_stats
->rx_in_range_errors
;
575 drvs
->rx_frame_too_long
= pport_stats
->rx_frames_too_long_lo
;
576 drvs
->rx_dropped_runt
= pport_stats
->rx_dropped_runt
;
577 drvs
->rx_ip_checksum_errs
= pport_stats
->rx_ip_checksum_errors
;
578 drvs
->rx_tcp_checksum_errs
= pport_stats
->rx_tcp_checksum_errors
;
579 drvs
->rx_udp_checksum_errs
= pport_stats
->rx_udp_checksum_errors
;
580 drvs
->rx_dropped_tcp_length
=
581 pport_stats
->rx_dropped_invalid_tcp_length
;
582 drvs
->rx_dropped_too_small
= pport_stats
->rx_dropped_too_small
;
583 drvs
->rx_dropped_too_short
= pport_stats
->rx_dropped_too_short
;
584 drvs
->rx_out_range_errors
= pport_stats
->rx_out_of_range_errors
;
585 drvs
->rx_dropped_header_too_small
=
586 pport_stats
->rx_dropped_header_too_small
;
587 drvs
->rx_input_fifo_overflow_drop
= pport_stats
->rx_fifo_overflow
;
588 drvs
->rx_address_filtered
=
589 pport_stats
->rx_address_filtered
+
590 pport_stats
->rx_vlan_filtered
;
591 drvs
->rx_alignment_symbol_errors
= pport_stats
->rx_symbol_errors_lo
;
592 drvs
->rxpp_fifo_overflow_drop
= pport_stats
->rx_fifo_overflow
;
593 drvs
->tx_pauseframes
= pport_stats
->tx_pause_frames_lo
;
594 drvs
->tx_controlframes
= pport_stats
->tx_control_frames_lo
;
595 drvs
->jabber_events
= pport_stats
->rx_jabbers
;
596 drvs
->forwarded_packets
= pport_stats
->num_forwards_lo
;
597 drvs
->rx_drops_mtu
= pport_stats
->rx_drops_mtu_lo
;
598 drvs
->rx_drops_too_many_frags
=
599 pport_stats
->rx_drops_too_many_frags_lo
;
602 static void accumulate_16bit_val(u32
*acc
, u16 val
)
604 #define lo(x) (x & 0xFFFF)
605 #define hi(x) (x & 0xFFFF0000)
606 bool wrapped
= val
< lo(*acc
);
607 u32 newacc
= hi(*acc
) + val
;
611 WRITE_ONCE(*acc
, newacc
);
614 static void populate_erx_stats(struct be_adapter
*adapter
,
615 struct be_rx_obj
*rxo
, u32 erx_stat
)
617 if (!BEx_chip(adapter
))
618 rx_stats(rxo
)->rx_drops_no_frags
= erx_stat
;
620 /* below erx HW counter can actually wrap around after
621 * 65535. Driver accumulates a 32-bit value
623 accumulate_16bit_val(&rx_stats(rxo
)->rx_drops_no_frags
,
627 void be_parse_stats(struct be_adapter
*adapter
)
629 struct be_erx_stats_v2
*erx
= be_erx_stats_from_cmd(adapter
);
630 struct be_rx_obj
*rxo
;
634 if (lancer_chip(adapter
)) {
635 populate_lancer_stats(adapter
);
637 if (BE2_chip(adapter
))
638 populate_be_v0_stats(adapter
);
639 else if (BE3_chip(adapter
))
641 populate_be_v1_stats(adapter
);
643 populate_be_v2_stats(adapter
);
645 /* erx_v2 is longer than v0, v1. use v2 for v0, v1 access */
646 for_all_rx_queues(adapter
, rxo
, i
) {
647 erx_stat
= erx
->rx_drops_no_fragments
[rxo
->q
.id
];
648 populate_erx_stats(adapter
, rxo
, erx_stat
);
653 static void be_get_stats64(struct net_device
*netdev
,
654 struct rtnl_link_stats64
*stats
)
656 struct be_adapter
*adapter
= netdev_priv(netdev
);
657 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
658 struct be_rx_obj
*rxo
;
659 struct be_tx_obj
*txo
;
664 for_all_rx_queues(adapter
, rxo
, i
) {
665 const struct be_rx_stats
*rx_stats
= rx_stats(rxo
);
668 start
= u64_stats_fetch_begin_irq(&rx_stats
->sync
);
669 pkts
= rx_stats(rxo
)->rx_pkts
;
670 bytes
= rx_stats(rxo
)->rx_bytes
;
671 } while (u64_stats_fetch_retry_irq(&rx_stats
->sync
, start
));
672 stats
->rx_packets
+= pkts
;
673 stats
->rx_bytes
+= bytes
;
674 stats
->multicast
+= rx_stats(rxo
)->rx_mcast_pkts
;
675 stats
->rx_dropped
+= rx_stats(rxo
)->rx_drops_no_skbs
+
676 rx_stats(rxo
)->rx_drops_no_frags
;
679 for_all_tx_queues(adapter
, txo
, i
) {
680 const struct be_tx_stats
*tx_stats
= tx_stats(txo
);
683 start
= u64_stats_fetch_begin_irq(&tx_stats
->sync
);
684 pkts
= tx_stats(txo
)->tx_pkts
;
685 bytes
= tx_stats(txo
)->tx_bytes
;
686 } while (u64_stats_fetch_retry_irq(&tx_stats
->sync
, start
));
687 stats
->tx_packets
+= pkts
;
688 stats
->tx_bytes
+= bytes
;
691 /* bad pkts received */
692 stats
->rx_errors
= drvs
->rx_crc_errors
+
693 drvs
->rx_alignment_symbol_errors
+
694 drvs
->rx_in_range_errors
+
695 drvs
->rx_out_range_errors
+
696 drvs
->rx_frame_too_long
+
697 drvs
->rx_dropped_too_small
+
698 drvs
->rx_dropped_too_short
+
699 drvs
->rx_dropped_header_too_small
+
700 drvs
->rx_dropped_tcp_length
+
701 drvs
->rx_dropped_runt
;
703 /* detailed rx errors */
704 stats
->rx_length_errors
= drvs
->rx_in_range_errors
+
705 drvs
->rx_out_range_errors
+
706 drvs
->rx_frame_too_long
;
708 stats
->rx_crc_errors
= drvs
->rx_crc_errors
;
710 /* frame alignment errors */
711 stats
->rx_frame_errors
= drvs
->rx_alignment_symbol_errors
;
713 /* receiver fifo overrun */
714 /* drops_no_pbuf is no per i/f, it's per BE card */
715 stats
->rx_fifo_errors
= drvs
->rxpp_fifo_overflow_drop
+
716 drvs
->rx_input_fifo_overflow_drop
+
717 drvs
->rx_drops_no_pbuf
;
720 void be_link_status_update(struct be_adapter
*adapter
, u8 link_status
)
722 struct net_device
*netdev
= adapter
->netdev
;
724 if (!(adapter
->flags
& BE_FLAGS_LINK_STATUS_INIT
)) {
725 netif_carrier_off(netdev
);
726 adapter
->flags
|= BE_FLAGS_LINK_STATUS_INIT
;
730 netif_carrier_on(netdev
);
732 netif_carrier_off(netdev
);
734 netdev_info(netdev
, "Link is %s\n", link_status
? "Up" : "Down");
737 static int be_gso_hdr_len(struct sk_buff
*skb
)
739 if (skb
->encapsulation
)
740 return skb_inner_transport_offset(skb
) +
741 inner_tcp_hdrlen(skb
);
742 return skb_transport_offset(skb
) + tcp_hdrlen(skb
);
745 static void be_tx_stats_update(struct be_tx_obj
*txo
, struct sk_buff
*skb
)
747 struct be_tx_stats
*stats
= tx_stats(txo
);
748 u32 tx_pkts
= skb_shinfo(skb
)->gso_segs
? : 1;
749 /* Account for headers which get duplicated in TSO pkt */
750 u32 dup_hdr_len
= tx_pkts
> 1 ? be_gso_hdr_len(skb
) * (tx_pkts
- 1) : 0;
752 u64_stats_update_begin(&stats
->sync
);
754 stats
->tx_bytes
+= skb
->len
+ dup_hdr_len
;
755 stats
->tx_pkts
+= tx_pkts
;
756 if (skb
->encapsulation
&& skb
->ip_summed
== CHECKSUM_PARTIAL
)
757 stats
->tx_vxlan_offload_pkts
+= tx_pkts
;
758 u64_stats_update_end(&stats
->sync
);
761 /* Returns number of WRBs needed for the skb */
762 static u32
skb_wrb_cnt(struct sk_buff
*skb
)
764 /* +1 for the header wrb */
765 return 1 + (skb_headlen(skb
) ? 1 : 0) + skb_shinfo(skb
)->nr_frags
;
768 static inline void wrb_fill(struct be_eth_wrb
*wrb
, u64 addr
, int len
)
770 wrb
->frag_pa_hi
= cpu_to_le32(upper_32_bits(addr
));
771 wrb
->frag_pa_lo
= cpu_to_le32(lower_32_bits(addr
));
772 wrb
->frag_len
= cpu_to_le32(len
& ETH_WRB_FRAG_LEN_MASK
);
776 /* A dummy wrb is just all zeros. Using a separate routine for dummy-wrb
777 * to avoid the swap and shift/mask operations in wrb_fill().
779 static inline void wrb_fill_dummy(struct be_eth_wrb
*wrb
)
787 static inline u16
be_get_tx_vlan_tag(struct be_adapter
*adapter
,
793 vlan_tag
= skb_vlan_tag_get(skb
);
794 vlan_prio
= skb_vlan_tag_get_prio(skb
);
795 /* If vlan priority provided by OS is NOT in available bmap */
796 if (!(adapter
->vlan_prio_bmap
& (1 << vlan_prio
)))
797 vlan_tag
= (vlan_tag
& ~VLAN_PRIO_MASK
) |
798 adapter
->recommended_prio_bits
;
803 /* Used only for IP tunnel packets */
804 static u16
skb_inner_ip_proto(struct sk_buff
*skb
)
806 return (inner_ip_hdr(skb
)->version
== 4) ?
807 inner_ip_hdr(skb
)->protocol
: inner_ipv6_hdr(skb
)->nexthdr
;
810 static u16
skb_ip_proto(struct sk_buff
*skb
)
812 return (ip_hdr(skb
)->version
== 4) ?
813 ip_hdr(skb
)->protocol
: ipv6_hdr(skb
)->nexthdr
;
816 static inline bool be_is_txq_full(struct be_tx_obj
*txo
)
818 return atomic_read(&txo
->q
.used
) + BE_MAX_TX_FRAG_COUNT
>= txo
->q
.len
;
821 static inline bool be_can_txq_wake(struct be_tx_obj
*txo
)
823 return atomic_read(&txo
->q
.used
) < txo
->q
.len
/ 2;
826 static inline bool be_is_tx_compl_pending(struct be_tx_obj
*txo
)
828 return atomic_read(&txo
->q
.used
) > txo
->pend_wrb_cnt
;
831 static void be_get_wrb_params_from_skb(struct be_adapter
*adapter
,
833 struct be_wrb_params
*wrb_params
)
837 if (skb_is_gso(skb
)) {
838 BE_WRB_F_SET(wrb_params
->features
, LSO
, 1);
839 wrb_params
->lso_mss
= skb_shinfo(skb
)->gso_size
;
840 if (skb_is_gso_v6(skb
) && !lancer_chip(adapter
))
841 BE_WRB_F_SET(wrb_params
->features
, LSO6
, 1);
842 } else if (skb
->ip_summed
== CHECKSUM_PARTIAL
) {
843 if (skb
->encapsulation
) {
844 BE_WRB_F_SET(wrb_params
->features
, IPCS
, 1);
845 proto
= skb_inner_ip_proto(skb
);
847 proto
= skb_ip_proto(skb
);
849 if (proto
== IPPROTO_TCP
)
850 BE_WRB_F_SET(wrb_params
->features
, TCPCS
, 1);
851 else if (proto
== IPPROTO_UDP
)
852 BE_WRB_F_SET(wrb_params
->features
, UDPCS
, 1);
855 if (skb_vlan_tag_present(skb
)) {
856 BE_WRB_F_SET(wrb_params
->features
, VLAN
, 1);
857 wrb_params
->vlan_tag
= be_get_tx_vlan_tag(adapter
, skb
);
860 BE_WRB_F_SET(wrb_params
->features
, CRC
, 1);
863 static void wrb_fill_hdr(struct be_adapter
*adapter
,
864 struct be_eth_hdr_wrb
*hdr
,
865 struct be_wrb_params
*wrb_params
,
868 memset(hdr
, 0, sizeof(*hdr
));
870 SET_TX_WRB_HDR_BITS(crc
, hdr
,
871 BE_WRB_F_GET(wrb_params
->features
, CRC
));
872 SET_TX_WRB_HDR_BITS(ipcs
, hdr
,
873 BE_WRB_F_GET(wrb_params
->features
, IPCS
));
874 SET_TX_WRB_HDR_BITS(tcpcs
, hdr
,
875 BE_WRB_F_GET(wrb_params
->features
, TCPCS
));
876 SET_TX_WRB_HDR_BITS(udpcs
, hdr
,
877 BE_WRB_F_GET(wrb_params
->features
, UDPCS
));
879 SET_TX_WRB_HDR_BITS(lso
, hdr
,
880 BE_WRB_F_GET(wrb_params
->features
, LSO
));
881 SET_TX_WRB_HDR_BITS(lso6
, hdr
,
882 BE_WRB_F_GET(wrb_params
->features
, LSO6
));
883 SET_TX_WRB_HDR_BITS(lso_mss
, hdr
, wrb_params
->lso_mss
);
885 /* Hack to skip HW VLAN tagging needs evt = 1, compl = 0. When this
886 * hack is not needed, the evt bit is set while ringing DB.
888 SET_TX_WRB_HDR_BITS(event
, hdr
,
889 BE_WRB_F_GET(wrb_params
->features
, VLAN_SKIP_HW
));
890 SET_TX_WRB_HDR_BITS(vlan
, hdr
,
891 BE_WRB_F_GET(wrb_params
->features
, VLAN
));
892 SET_TX_WRB_HDR_BITS(vlan_tag
, hdr
, wrb_params
->vlan_tag
);
894 SET_TX_WRB_HDR_BITS(num_wrb
, hdr
, skb_wrb_cnt(skb
));
895 SET_TX_WRB_HDR_BITS(len
, hdr
, skb
->len
);
896 SET_TX_WRB_HDR_BITS(mgmt
, hdr
,
897 BE_WRB_F_GET(wrb_params
->features
, OS2BMC
));
900 static void unmap_tx_frag(struct device
*dev
, struct be_eth_wrb
*wrb
,
904 u32 frag_len
= le32_to_cpu(wrb
->frag_len
);
907 dma
= (u64
)le32_to_cpu(wrb
->frag_pa_hi
) << 32 |
908 (u64
)le32_to_cpu(wrb
->frag_pa_lo
);
911 dma_unmap_single(dev
, dma
, frag_len
, DMA_TO_DEVICE
);
913 dma_unmap_page(dev
, dma
, frag_len
, DMA_TO_DEVICE
);
917 /* Grab a WRB header for xmit */
918 static u32
be_tx_get_wrb_hdr(struct be_tx_obj
*txo
)
920 u32 head
= txo
->q
.head
;
922 queue_head_inc(&txo
->q
);
926 /* Set up the WRB header for xmit */
927 static void be_tx_setup_wrb_hdr(struct be_adapter
*adapter
,
928 struct be_tx_obj
*txo
,
929 struct be_wrb_params
*wrb_params
,
930 struct sk_buff
*skb
, u16 head
)
932 u32 num_frags
= skb_wrb_cnt(skb
);
933 struct be_queue_info
*txq
= &txo
->q
;
934 struct be_eth_hdr_wrb
*hdr
= queue_index_node(txq
, head
);
936 wrb_fill_hdr(adapter
, hdr
, wrb_params
, skb
);
937 be_dws_cpu_to_le(hdr
, sizeof(*hdr
));
939 BUG_ON(txo
->sent_skb_list
[head
]);
940 txo
->sent_skb_list
[head
] = skb
;
941 txo
->last_req_hdr
= head
;
942 atomic_add(num_frags
, &txq
->used
);
943 txo
->last_req_wrb_cnt
= num_frags
;
944 txo
->pend_wrb_cnt
+= num_frags
;
947 /* Setup a WRB fragment (buffer descriptor) for xmit */
948 static void be_tx_setup_wrb_frag(struct be_tx_obj
*txo
, dma_addr_t busaddr
,
951 struct be_eth_wrb
*wrb
;
952 struct be_queue_info
*txq
= &txo
->q
;
954 wrb
= queue_head_node(txq
);
955 wrb_fill(wrb
, busaddr
, len
);
959 /* Bring the queue back to the state it was in before be_xmit_enqueue() routine
960 * was invoked. The producer index is restored to the previous packet and the
961 * WRBs of the current packet are unmapped. Invoked to handle tx setup errors.
963 static void be_xmit_restore(struct be_adapter
*adapter
,
964 struct be_tx_obj
*txo
, u32 head
, bool map_single
,
968 struct be_eth_wrb
*wrb
;
969 struct be_queue_info
*txq
= &txo
->q
;
971 dev
= &adapter
->pdev
->dev
;
974 /* skip the first wrb (hdr); it's not mapped */
977 wrb
= queue_head_node(txq
);
978 unmap_tx_frag(dev
, wrb
, map_single
);
980 copied
-= le32_to_cpu(wrb
->frag_len
);
987 /* Enqueue the given packet for transmit. This routine allocates WRBs for the
988 * packet, dma maps the packet buffers and sets up the WRBs. Returns the number
989 * of WRBs used up by the packet.
991 static u32
be_xmit_enqueue(struct be_adapter
*adapter
, struct be_tx_obj
*txo
,
993 struct be_wrb_params
*wrb_params
)
995 u32 i
, copied
= 0, wrb_cnt
= skb_wrb_cnt(skb
);
996 struct device
*dev
= &adapter
->pdev
->dev
;
997 bool map_single
= false;
1002 head
= be_tx_get_wrb_hdr(txo
);
1004 if (skb
->len
> skb
->data_len
) {
1005 len
= skb_headlen(skb
);
1007 busaddr
= dma_map_single(dev
, skb
->data
, len
, DMA_TO_DEVICE
);
1008 if (dma_mapping_error(dev
, busaddr
))
1011 be_tx_setup_wrb_frag(txo
, busaddr
, len
);
1015 for (i
= 0; i
< skb_shinfo(skb
)->nr_frags
; i
++) {
1016 const skb_frag_t
*frag
= &skb_shinfo(skb
)->frags
[i
];
1017 len
= skb_frag_size(frag
);
1019 busaddr
= skb_frag_dma_map(dev
, frag
, 0, len
, DMA_TO_DEVICE
);
1020 if (dma_mapping_error(dev
, busaddr
))
1022 be_tx_setup_wrb_frag(txo
, busaddr
, len
);
1026 be_tx_setup_wrb_hdr(adapter
, txo
, wrb_params
, skb
, head
);
1028 be_tx_stats_update(txo
, skb
);
1032 adapter
->drv_stats
.dma_map_errors
++;
1033 be_xmit_restore(adapter
, txo
, head
, map_single
, copied
);
1037 static inline int qnq_async_evt_rcvd(struct be_adapter
*adapter
)
1039 return adapter
->flags
& BE_FLAGS_QNQ_ASYNC_EVT_RCVD
;
1042 static struct sk_buff
*be_insert_vlan_in_pkt(struct be_adapter
*adapter
,
1043 struct sk_buff
*skb
,
1044 struct be_wrb_params
1047 bool insert_vlan
= false;
1050 skb
= skb_share_check(skb
, GFP_ATOMIC
);
1054 if (skb_vlan_tag_present(skb
)) {
1055 vlan_tag
= be_get_tx_vlan_tag(adapter
, skb
);
1059 if (qnq_async_evt_rcvd(adapter
) && adapter
->pvid
) {
1061 vlan_tag
= adapter
->pvid
;
1064 /* f/w workaround to set skip_hw_vlan = 1, informs the F/W to
1065 * skip VLAN insertion
1067 BE_WRB_F_SET(wrb_params
->features
, VLAN_SKIP_HW
, 1);
1071 skb
= vlan_insert_tag_set_proto(skb
, htons(ETH_P_8021Q
),
1075 __vlan_hwaccel_clear_tag(skb
);
1078 /* Insert the outer VLAN, if any */
1079 if (adapter
->qnq_vid
) {
1080 vlan_tag
= adapter
->qnq_vid
;
1081 skb
= vlan_insert_tag_set_proto(skb
, htons(ETH_P_8021Q
),
1085 BE_WRB_F_SET(wrb_params
->features
, VLAN_SKIP_HW
, 1);
1091 static bool be_ipv6_exthdr_check(struct sk_buff
*skb
)
1093 struct ethhdr
*eh
= (struct ethhdr
*)skb
->data
;
1094 u16 offset
= ETH_HLEN
;
1096 if (eh
->h_proto
== htons(ETH_P_IPV6
)) {
1097 struct ipv6hdr
*ip6h
= (struct ipv6hdr
*)(skb
->data
+ offset
);
1099 offset
+= sizeof(struct ipv6hdr
);
1100 if (ip6h
->nexthdr
!= NEXTHDR_TCP
&&
1101 ip6h
->nexthdr
!= NEXTHDR_UDP
) {
1102 struct ipv6_opt_hdr
*ehdr
=
1103 (struct ipv6_opt_hdr
*)(skb
->data
+ offset
);
1105 /* offending pkt: 2nd byte following IPv6 hdr is 0xff */
1106 if (ehdr
->hdrlen
== 0xff)
1113 static int be_vlan_tag_tx_chk(struct be_adapter
*adapter
, struct sk_buff
*skb
)
1115 return skb_vlan_tag_present(skb
) || adapter
->pvid
|| adapter
->qnq_vid
;
1118 static int be_ipv6_tx_stall_chk(struct be_adapter
*adapter
, struct sk_buff
*skb
)
1120 return BE3_chip(adapter
) && be_ipv6_exthdr_check(skb
);
1123 static struct sk_buff
*be_lancer_xmit_workarounds(struct be_adapter
*adapter
,
1124 struct sk_buff
*skb
,
1125 struct be_wrb_params
1128 struct vlan_ethhdr
*veh
= (struct vlan_ethhdr
*)skb
->data
;
1129 unsigned int eth_hdr_len
;
1132 /* For padded packets, BE HW modifies tot_len field in IP header
1133 * incorrecly when VLAN tag is inserted by HW.
1134 * For padded packets, Lancer computes incorrect checksum.
1136 eth_hdr_len
= ntohs(skb
->protocol
) == ETH_P_8021Q
?
1137 VLAN_ETH_HLEN
: ETH_HLEN
;
1138 if (skb
->len
<= 60 &&
1139 (lancer_chip(adapter
) || skb_vlan_tag_present(skb
)) &&
1141 ip
= (struct iphdr
*)ip_hdr(skb
);
1142 pskb_trim(skb
, eth_hdr_len
+ ntohs(ip
->tot_len
));
1145 /* If vlan tag is already inlined in the packet, skip HW VLAN
1146 * tagging in pvid-tagging mode
1148 if (be_pvid_tagging_enabled(adapter
) &&
1149 veh
->h_vlan_proto
== htons(ETH_P_8021Q
))
1150 BE_WRB_F_SET(wrb_params
->features
, VLAN_SKIP_HW
, 1);
1152 /* HW has a bug wherein it will calculate CSUM for VLAN
1153 * pkts even though it is disabled.
1154 * Manually insert VLAN in pkt.
1156 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
&&
1157 skb_vlan_tag_present(skb
)) {
1158 skb
= be_insert_vlan_in_pkt(adapter
, skb
, wrb_params
);
1163 /* HW may lockup when VLAN HW tagging is requested on
1164 * certain ipv6 packets. Drop such pkts if the HW workaround to
1165 * skip HW tagging is not enabled by FW.
1167 if (unlikely(be_ipv6_tx_stall_chk(adapter
, skb
) &&
1168 (adapter
->pvid
|| adapter
->qnq_vid
) &&
1169 !qnq_async_evt_rcvd(adapter
)))
1172 /* Manual VLAN tag insertion to prevent:
1173 * ASIC lockup when the ASIC inserts VLAN tag into
1174 * certain ipv6 packets. Insert VLAN tags in driver,
1175 * and set event, completion, vlan bits accordingly
1178 if (be_ipv6_tx_stall_chk(adapter
, skb
) &&
1179 be_vlan_tag_tx_chk(adapter
, skb
)) {
1180 skb
= be_insert_vlan_in_pkt(adapter
, skb
, wrb_params
);
1187 dev_kfree_skb_any(skb
);
1192 static struct sk_buff
*be_xmit_workarounds(struct be_adapter
*adapter
,
1193 struct sk_buff
*skb
,
1194 struct be_wrb_params
*wrb_params
)
1198 /* Lancer, SH and BE3 in SRIOV mode have a bug wherein
1199 * packets that are 32b or less may cause a transmit stall
1200 * on that port. The workaround is to pad such packets
1201 * (len <= 32 bytes) to a minimum length of 36b.
1203 if (skb
->len
<= 32) {
1204 if (skb_put_padto(skb
, 36))
1208 if (BEx_chip(adapter
) || lancer_chip(adapter
)) {
1209 skb
= be_lancer_xmit_workarounds(adapter
, skb
, wrb_params
);
1214 /* The stack can send us skbs with length greater than
1215 * what the HW can handle. Trim the extra bytes.
1217 WARN_ON_ONCE(skb
->len
> BE_MAX_GSO_SIZE
);
1218 err
= pskb_trim(skb
, BE_MAX_GSO_SIZE
);
1224 static void be_xmit_flush(struct be_adapter
*adapter
, struct be_tx_obj
*txo
)
1226 struct be_queue_info
*txq
= &txo
->q
;
1227 struct be_eth_hdr_wrb
*hdr
= queue_index_node(txq
, txo
->last_req_hdr
);
1229 /* Mark the last request eventable if it hasn't been marked already */
1230 if (!(hdr
->dw
[2] & cpu_to_le32(TX_HDR_WRB_EVT
)))
1231 hdr
->dw
[2] |= cpu_to_le32(TX_HDR_WRB_EVT
| TX_HDR_WRB_COMPL
);
1233 /* compose a dummy wrb if there are odd set of wrbs to notify */
1234 if (!lancer_chip(adapter
) && (txo
->pend_wrb_cnt
& 1)) {
1235 wrb_fill_dummy(queue_head_node(txq
));
1236 queue_head_inc(txq
);
1237 atomic_inc(&txq
->used
);
1238 txo
->pend_wrb_cnt
++;
1239 hdr
->dw
[2] &= ~cpu_to_le32(TX_HDR_WRB_NUM_MASK
<<
1240 TX_HDR_WRB_NUM_SHIFT
);
1241 hdr
->dw
[2] |= cpu_to_le32((txo
->last_req_wrb_cnt
+ 1) <<
1242 TX_HDR_WRB_NUM_SHIFT
);
1244 be_txq_notify(adapter
, txo
, txo
->pend_wrb_cnt
);
1245 txo
->pend_wrb_cnt
= 0;
1248 /* OS2BMC related */
1250 #define DHCP_CLIENT_PORT 68
1251 #define DHCP_SERVER_PORT 67
1252 #define NET_BIOS_PORT1 137
1253 #define NET_BIOS_PORT2 138
1254 #define DHCPV6_RAS_PORT 547
1256 #define is_mc_allowed_on_bmc(adapter, eh) \
1257 (!is_multicast_filt_enabled(adapter) && \
1258 is_multicast_ether_addr(eh->h_dest) && \
1259 !is_broadcast_ether_addr(eh->h_dest))
1261 #define is_bc_allowed_on_bmc(adapter, eh) \
1262 (!is_broadcast_filt_enabled(adapter) && \
1263 is_broadcast_ether_addr(eh->h_dest))
1265 #define is_arp_allowed_on_bmc(adapter, skb) \
1266 (is_arp(skb) && is_arp_filt_enabled(adapter))
1268 #define is_arp(skb) (skb->protocol == htons(ETH_P_ARP))
1270 #define is_arp_filt_enabled(adapter) \
1271 (adapter->bmc_filt_mask & (BMC_FILT_BROADCAST_ARP))
1273 #define is_dhcp_client_filt_enabled(adapter) \
1274 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_CLIENT)
1276 #define is_dhcp_srvr_filt_enabled(adapter) \
1277 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_SERVER)
1279 #define is_nbios_filt_enabled(adapter) \
1280 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_NET_BIOS)
1282 #define is_ipv6_na_filt_enabled(adapter) \
1283 (adapter->bmc_filt_mask & \
1284 BMC_FILT_MULTICAST_IPV6_NEIGH_ADVER)
1286 #define is_ipv6_ra_filt_enabled(adapter) \
1287 (adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RA)
1289 #define is_ipv6_ras_filt_enabled(adapter) \
1290 (adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RAS)
1292 #define is_broadcast_filt_enabled(adapter) \
1293 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST)
1295 #define is_multicast_filt_enabled(adapter) \
1296 (adapter->bmc_filt_mask & BMC_FILT_MULTICAST)
1298 static bool be_send_pkt_to_bmc(struct be_adapter
*adapter
,
1299 struct sk_buff
**skb
)
1301 struct ethhdr
*eh
= (struct ethhdr
*)(*skb
)->data
;
1302 bool os2bmc
= false;
1304 if (!be_is_os2bmc_enabled(adapter
))
1307 if (!is_multicast_ether_addr(eh
->h_dest
))
1310 if (is_mc_allowed_on_bmc(adapter
, eh
) ||
1311 is_bc_allowed_on_bmc(adapter
, eh
) ||
1312 is_arp_allowed_on_bmc(adapter
, (*skb
))) {
1317 if ((*skb
)->protocol
== htons(ETH_P_IPV6
)) {
1318 struct ipv6hdr
*hdr
= ipv6_hdr((*skb
));
1319 u8 nexthdr
= hdr
->nexthdr
;
1321 if (nexthdr
== IPPROTO_ICMPV6
) {
1322 struct icmp6hdr
*icmp6
= icmp6_hdr((*skb
));
1324 switch (icmp6
->icmp6_type
) {
1325 case NDISC_ROUTER_ADVERTISEMENT
:
1326 os2bmc
= is_ipv6_ra_filt_enabled(adapter
);
1328 case NDISC_NEIGHBOUR_ADVERTISEMENT
:
1329 os2bmc
= is_ipv6_na_filt_enabled(adapter
);
1337 if (is_udp_pkt((*skb
))) {
1338 struct udphdr
*udp
= udp_hdr((*skb
));
1340 switch (ntohs(udp
->dest
)) {
1341 case DHCP_CLIENT_PORT
:
1342 os2bmc
= is_dhcp_client_filt_enabled(adapter
);
1344 case DHCP_SERVER_PORT
:
1345 os2bmc
= is_dhcp_srvr_filt_enabled(adapter
);
1347 case NET_BIOS_PORT1
:
1348 case NET_BIOS_PORT2
:
1349 os2bmc
= is_nbios_filt_enabled(adapter
);
1351 case DHCPV6_RAS_PORT
:
1352 os2bmc
= is_ipv6_ras_filt_enabled(adapter
);
1359 /* For packets over a vlan, which are destined
1360 * to BMC, asic expects the vlan to be inline in the packet.
1363 *skb
= be_insert_vlan_in_pkt(adapter
, *skb
, NULL
);
1368 static netdev_tx_t
be_xmit(struct sk_buff
*skb
, struct net_device
*netdev
)
1370 struct be_adapter
*adapter
= netdev_priv(netdev
);
1371 u16 q_idx
= skb_get_queue_mapping(skb
);
1372 struct be_tx_obj
*txo
= &adapter
->tx_obj
[q_idx
];
1373 struct be_wrb_params wrb_params
= { 0 };
1374 bool flush
= !netdev_xmit_more();
1377 skb
= be_xmit_workarounds(adapter
, skb
, &wrb_params
);
1381 be_get_wrb_params_from_skb(adapter
, skb
, &wrb_params
);
1383 wrb_cnt
= be_xmit_enqueue(adapter
, txo
, skb
, &wrb_params
);
1384 if (unlikely(!wrb_cnt
)) {
1385 dev_kfree_skb_any(skb
);
1389 /* if os2bmc is enabled and if the pkt is destined to bmc,
1390 * enqueue the pkt a 2nd time with mgmt bit set.
1392 if (be_send_pkt_to_bmc(adapter
, &skb
)) {
1393 BE_WRB_F_SET(wrb_params
.features
, OS2BMC
, 1);
1394 wrb_cnt
= be_xmit_enqueue(adapter
, txo
, skb
, &wrb_params
);
1395 if (unlikely(!wrb_cnt
))
1401 if (be_is_txq_full(txo
)) {
1402 netif_stop_subqueue(netdev
, q_idx
);
1403 tx_stats(txo
)->tx_stops
++;
1406 if (flush
|| __netif_subqueue_stopped(netdev
, q_idx
))
1407 be_xmit_flush(adapter
, txo
);
1409 return NETDEV_TX_OK
;
1411 tx_stats(txo
)->tx_drv_drops
++;
1412 /* Flush the already enqueued tx requests */
1413 if (flush
&& txo
->pend_wrb_cnt
)
1414 be_xmit_flush(adapter
, txo
);
1416 return NETDEV_TX_OK
;
1419 static void be_tx_timeout(struct net_device
*netdev
, unsigned int txqueue
)
1421 struct be_adapter
*adapter
= netdev_priv(netdev
);
1422 struct device
*dev
= &adapter
->pdev
->dev
;
1423 struct be_tx_obj
*txo
;
1424 struct sk_buff
*skb
;
1425 struct tcphdr
*tcphdr
;
1426 struct udphdr
*udphdr
;
1431 for_all_tx_queues(adapter
, txo
, i
) {
1432 dev_info(dev
, "TXQ Dump: %d H: %d T: %d used: %d, qid: 0x%x\n",
1433 i
, txo
->q
.head
, txo
->q
.tail
,
1434 atomic_read(&txo
->q
.used
), txo
->q
.id
);
1436 entry
= txo
->q
.dma_mem
.va
;
1437 for (j
= 0; j
< TX_Q_LEN
* 4; j
+= 4) {
1438 if (entry
[j
] != 0 || entry
[j
+ 1] != 0 ||
1439 entry
[j
+ 2] != 0 || entry
[j
+ 3] != 0) {
1440 dev_info(dev
, "Entry %d 0x%x 0x%x 0x%x 0x%x\n",
1441 j
, entry
[j
], entry
[j
+ 1],
1442 entry
[j
+ 2], entry
[j
+ 3]);
1446 entry
= txo
->cq
.dma_mem
.va
;
1447 dev_info(dev
, "TXCQ Dump: %d H: %d T: %d used: %d\n",
1448 i
, txo
->cq
.head
, txo
->cq
.tail
,
1449 atomic_read(&txo
->cq
.used
));
1450 for (j
= 0; j
< TX_CQ_LEN
* 4; j
+= 4) {
1451 if (entry
[j
] != 0 || entry
[j
+ 1] != 0 ||
1452 entry
[j
+ 2] != 0 || entry
[j
+ 3] != 0) {
1453 dev_info(dev
, "Entry %d 0x%x 0x%x 0x%x 0x%x\n",
1454 j
, entry
[j
], entry
[j
+ 1],
1455 entry
[j
+ 2], entry
[j
+ 3]);
1459 for (j
= 0; j
< TX_Q_LEN
; j
++) {
1460 if (txo
->sent_skb_list
[j
]) {
1461 skb
= txo
->sent_skb_list
[j
];
1462 if (ip_hdr(skb
)->protocol
== IPPROTO_TCP
) {
1463 tcphdr
= tcp_hdr(skb
);
1464 dev_info(dev
, "TCP source port %d\n",
1465 ntohs(tcphdr
->source
));
1466 dev_info(dev
, "TCP dest port %d\n",
1467 ntohs(tcphdr
->dest
));
1468 dev_info(dev
, "TCP sequence num %d\n",
1469 ntohs(tcphdr
->seq
));
1470 dev_info(dev
, "TCP ack_seq %d\n",
1471 ntohs(tcphdr
->ack_seq
));
1472 } else if (ip_hdr(skb
)->protocol
==
1474 udphdr
= udp_hdr(skb
);
1475 dev_info(dev
, "UDP source port %d\n",
1476 ntohs(udphdr
->source
));
1477 dev_info(dev
, "UDP dest port %d\n",
1478 ntohs(udphdr
->dest
));
1480 dev_info(dev
, "skb[%d] %p len %d proto 0x%x\n",
1481 j
, skb
, skb
->len
, skb
->protocol
);
1486 if (lancer_chip(adapter
)) {
1487 dev_info(dev
, "Initiating reset due to tx timeout\n");
1488 dev_info(dev
, "Resetting adapter\n");
1489 status
= lancer_physdev_ctrl(adapter
,
1490 PHYSDEV_CONTROL_FW_RESET_MASK
);
1492 dev_err(dev
, "Reset failed .. Reboot server\n");
1496 static inline bool be_in_all_promisc(struct be_adapter
*adapter
)
1498 return (adapter
->if_flags
& BE_IF_FLAGS_ALL_PROMISCUOUS
) ==
1499 BE_IF_FLAGS_ALL_PROMISCUOUS
;
1502 static int be_set_vlan_promisc(struct be_adapter
*adapter
)
1504 struct device
*dev
= &adapter
->pdev
->dev
;
1507 if (adapter
->if_flags
& BE_IF_FLAGS_VLAN_PROMISCUOUS
)
1510 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_VLAN_PROMISCUOUS
, ON
);
1512 dev_info(dev
, "Enabled VLAN promiscuous mode\n");
1513 adapter
->if_flags
|= BE_IF_FLAGS_VLAN_PROMISCUOUS
;
1515 dev_err(dev
, "Failed to enable VLAN promiscuous mode\n");
1520 static int be_clear_vlan_promisc(struct be_adapter
*adapter
)
1522 struct device
*dev
= &adapter
->pdev
->dev
;
1525 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_VLAN_PROMISCUOUS
, OFF
);
1527 dev_info(dev
, "Disabling VLAN promiscuous mode\n");
1528 adapter
->if_flags
&= ~BE_IF_FLAGS_VLAN_PROMISCUOUS
;
1534 * A max of 64 (BE_NUM_VLANS_SUPPORTED) vlans can be configured in BE.
1535 * If the user configures more, place BE in vlan promiscuous mode.
1537 static int be_vid_config(struct be_adapter
*adapter
)
1539 struct device
*dev
= &adapter
->pdev
->dev
;
1540 u16 vids
[BE_NUM_VLANS_SUPPORTED
];
1544 /* No need to change the VLAN state if the I/F is in promiscuous */
1545 if (adapter
->netdev
->flags
& IFF_PROMISC
)
1548 if (adapter
->vlans_added
> be_max_vlans(adapter
))
1549 return be_set_vlan_promisc(adapter
);
1551 if (adapter
->if_flags
& BE_IF_FLAGS_VLAN_PROMISCUOUS
) {
1552 status
= be_clear_vlan_promisc(adapter
);
1556 /* Construct VLAN Table to give to HW */
1557 for_each_set_bit(i
, adapter
->vids
, VLAN_N_VID
)
1558 vids
[num
++] = cpu_to_le16(i
);
1560 status
= be_cmd_vlan_config(adapter
, adapter
->if_handle
, vids
, num
, 0);
1562 dev_err(dev
, "Setting HW VLAN filtering failed\n");
1563 /* Set to VLAN promisc mode as setting VLAN filter failed */
1564 if (addl_status(status
) == MCC_ADDL_STATUS_INSUFFICIENT_VLANS
||
1565 addl_status(status
) ==
1566 MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES
)
1567 return be_set_vlan_promisc(adapter
);
1572 static int be_vlan_add_vid(struct net_device
*netdev
, __be16 proto
, u16 vid
)
1574 struct be_adapter
*adapter
= netdev_priv(netdev
);
1577 mutex_lock(&adapter
->rx_filter_lock
);
1579 /* Packets with VID 0 are always received by Lancer by default */
1580 if (lancer_chip(adapter
) && vid
== 0)
1583 if (test_bit(vid
, adapter
->vids
))
1586 set_bit(vid
, adapter
->vids
);
1587 adapter
->vlans_added
++;
1589 status
= be_vid_config(adapter
);
1591 mutex_unlock(&adapter
->rx_filter_lock
);
1595 static int be_vlan_rem_vid(struct net_device
*netdev
, __be16 proto
, u16 vid
)
1597 struct be_adapter
*adapter
= netdev_priv(netdev
);
1600 mutex_lock(&adapter
->rx_filter_lock
);
1602 /* Packets with VID 0 are always received by Lancer by default */
1603 if (lancer_chip(adapter
) && vid
== 0)
1606 if (!test_bit(vid
, adapter
->vids
))
1609 clear_bit(vid
, adapter
->vids
);
1610 adapter
->vlans_added
--;
1612 status
= be_vid_config(adapter
);
1614 mutex_unlock(&adapter
->rx_filter_lock
);
1618 static void be_set_all_promisc(struct be_adapter
*adapter
)
1620 be_cmd_rx_filter(adapter
, BE_IF_FLAGS_ALL_PROMISCUOUS
, ON
);
1621 adapter
->if_flags
|= BE_IF_FLAGS_ALL_PROMISCUOUS
;
1624 static void be_set_mc_promisc(struct be_adapter
*adapter
)
1628 if (adapter
->if_flags
& BE_IF_FLAGS_MCAST_PROMISCUOUS
)
1631 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_MCAST_PROMISCUOUS
, ON
);
1633 adapter
->if_flags
|= BE_IF_FLAGS_MCAST_PROMISCUOUS
;
1636 static void be_set_uc_promisc(struct be_adapter
*adapter
)
1640 if (adapter
->if_flags
& BE_IF_FLAGS_PROMISCUOUS
)
1643 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_PROMISCUOUS
, ON
);
1645 adapter
->if_flags
|= BE_IF_FLAGS_PROMISCUOUS
;
1648 static void be_clear_uc_promisc(struct be_adapter
*adapter
)
1652 if (!(adapter
->if_flags
& BE_IF_FLAGS_PROMISCUOUS
))
1655 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_PROMISCUOUS
, OFF
);
1657 adapter
->if_flags
&= ~BE_IF_FLAGS_PROMISCUOUS
;
1660 /* The below 2 functions are the callback args for __dev_mc_sync/dev_uc_sync().
1661 * We use a single callback function for both sync and unsync. We really don't
1662 * add/remove addresses through this callback. But, we use it to detect changes
1663 * to the uc/mc lists. The entire uc/mc list is programmed in be_set_rx_mode().
1665 static int be_uc_list_update(struct net_device
*netdev
,
1666 const unsigned char *addr
)
1668 struct be_adapter
*adapter
= netdev_priv(netdev
);
1670 adapter
->update_uc_list
= true;
1674 static int be_mc_list_update(struct net_device
*netdev
,
1675 const unsigned char *addr
)
1677 struct be_adapter
*adapter
= netdev_priv(netdev
);
1679 adapter
->update_mc_list
= true;
1683 static void be_set_mc_list(struct be_adapter
*adapter
)
1685 struct net_device
*netdev
= adapter
->netdev
;
1686 struct netdev_hw_addr
*ha
;
1687 bool mc_promisc
= false;
1690 netif_addr_lock_bh(netdev
);
1691 __dev_mc_sync(netdev
, be_mc_list_update
, be_mc_list_update
);
1693 if (netdev
->flags
& IFF_PROMISC
) {
1694 adapter
->update_mc_list
= false;
1695 } else if (netdev
->flags
& IFF_ALLMULTI
||
1696 netdev_mc_count(netdev
) > be_max_mc(adapter
)) {
1697 /* Enable multicast promisc if num configured exceeds
1701 adapter
->update_mc_list
= false;
1702 } else if (adapter
->if_flags
& BE_IF_FLAGS_MCAST_PROMISCUOUS
) {
1703 /* Update mc-list unconditionally if the iface was previously
1704 * in mc-promisc mode and now is out of that mode.
1706 adapter
->update_mc_list
= true;
1709 if (adapter
->update_mc_list
) {
1712 /* cache the mc-list in adapter */
1713 netdev_for_each_mc_addr(ha
, netdev
) {
1714 ether_addr_copy(adapter
->mc_list
[i
].mac
, ha
->addr
);
1717 adapter
->mc_count
= netdev_mc_count(netdev
);
1719 netif_addr_unlock_bh(netdev
);
1722 be_set_mc_promisc(adapter
);
1723 } else if (adapter
->update_mc_list
) {
1724 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_MULTICAST
, ON
);
1726 adapter
->if_flags
&= ~BE_IF_FLAGS_MCAST_PROMISCUOUS
;
1728 be_set_mc_promisc(adapter
);
1730 adapter
->update_mc_list
= false;
1734 static void be_clear_mc_list(struct be_adapter
*adapter
)
1736 struct net_device
*netdev
= adapter
->netdev
;
1738 __dev_mc_unsync(netdev
, NULL
);
1739 be_cmd_rx_filter(adapter
, BE_IF_FLAGS_MULTICAST
, OFF
);
1740 adapter
->mc_count
= 0;
1743 static int be_uc_mac_add(struct be_adapter
*adapter
, int uc_idx
)
1745 if (ether_addr_equal(adapter
->uc_list
[uc_idx
].mac
, adapter
->dev_mac
)) {
1746 adapter
->pmac_id
[uc_idx
+ 1] = adapter
->pmac_id
[0];
1750 return be_cmd_pmac_add(adapter
, adapter
->uc_list
[uc_idx
].mac
,
1752 &adapter
->pmac_id
[uc_idx
+ 1], 0);
1755 static void be_uc_mac_del(struct be_adapter
*adapter
, int pmac_id
)
1757 if (pmac_id
== adapter
->pmac_id
[0])
1760 be_cmd_pmac_del(adapter
, adapter
->if_handle
, pmac_id
, 0);
1763 static void be_set_uc_list(struct be_adapter
*adapter
)
1765 struct net_device
*netdev
= adapter
->netdev
;
1766 struct netdev_hw_addr
*ha
;
1767 bool uc_promisc
= false;
1768 int curr_uc_macs
= 0, i
;
1770 netif_addr_lock_bh(netdev
);
1771 __dev_uc_sync(netdev
, be_uc_list_update
, be_uc_list_update
);
1773 if (netdev
->flags
& IFF_PROMISC
) {
1774 adapter
->update_uc_list
= false;
1775 } else if (netdev_uc_count(netdev
) > (be_max_uc(adapter
) - 1)) {
1777 adapter
->update_uc_list
= false;
1778 } else if (adapter
->if_flags
& BE_IF_FLAGS_PROMISCUOUS
) {
1779 /* Update uc-list unconditionally if the iface was previously
1780 * in uc-promisc mode and now is out of that mode.
1782 adapter
->update_uc_list
= true;
1785 if (adapter
->update_uc_list
) {
1786 /* cache the uc-list in adapter array */
1788 netdev_for_each_uc_addr(ha
, netdev
) {
1789 ether_addr_copy(adapter
->uc_list
[i
].mac
, ha
->addr
);
1792 curr_uc_macs
= netdev_uc_count(netdev
);
1794 netif_addr_unlock_bh(netdev
);
1797 be_set_uc_promisc(adapter
);
1798 } else if (adapter
->update_uc_list
) {
1799 be_clear_uc_promisc(adapter
);
1801 for (i
= 0; i
< adapter
->uc_macs
; i
++)
1802 be_uc_mac_del(adapter
, adapter
->pmac_id
[i
+ 1]);
1804 for (i
= 0; i
< curr_uc_macs
; i
++)
1805 be_uc_mac_add(adapter
, i
);
1806 adapter
->uc_macs
= curr_uc_macs
;
1807 adapter
->update_uc_list
= false;
1811 static void be_clear_uc_list(struct be_adapter
*adapter
)
1813 struct net_device
*netdev
= adapter
->netdev
;
1816 __dev_uc_unsync(netdev
, NULL
);
1817 for (i
= 0; i
< adapter
->uc_macs
; i
++)
1818 be_uc_mac_del(adapter
, adapter
->pmac_id
[i
+ 1]);
1820 adapter
->uc_macs
= 0;
1823 static void __be_set_rx_mode(struct be_adapter
*adapter
)
1825 struct net_device
*netdev
= adapter
->netdev
;
1827 mutex_lock(&adapter
->rx_filter_lock
);
1829 if (netdev
->flags
& IFF_PROMISC
) {
1830 if (!be_in_all_promisc(adapter
))
1831 be_set_all_promisc(adapter
);
1832 } else if (be_in_all_promisc(adapter
)) {
1833 /* We need to re-program the vlan-list or clear
1834 * vlan-promisc mode (if needed) when the interface
1835 * comes out of promisc mode.
1837 be_vid_config(adapter
);
1840 be_set_uc_list(adapter
);
1841 be_set_mc_list(adapter
);
1843 mutex_unlock(&adapter
->rx_filter_lock
);
1846 static void be_work_set_rx_mode(struct work_struct
*work
)
1848 struct be_cmd_work
*cmd_work
=
1849 container_of(work
, struct be_cmd_work
, work
);
1851 __be_set_rx_mode(cmd_work
->adapter
);
1855 static int be_set_vf_mac(struct net_device
*netdev
, int vf
, u8
*mac
)
1857 struct be_adapter
*adapter
= netdev_priv(netdev
);
1858 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1861 if (!sriov_enabled(adapter
))
1864 if (!is_valid_ether_addr(mac
) || vf
>= adapter
->num_vfs
)
1867 /* Proceed further only if user provided MAC is different
1870 if (ether_addr_equal(mac
, vf_cfg
->mac_addr
))
1873 if (BEx_chip(adapter
)) {
1874 be_cmd_pmac_del(adapter
, vf_cfg
->if_handle
, vf_cfg
->pmac_id
,
1877 status
= be_cmd_pmac_add(adapter
, mac
, vf_cfg
->if_handle
,
1878 &vf_cfg
->pmac_id
, vf
+ 1);
1880 status
= be_cmd_set_mac(adapter
, mac
, vf_cfg
->if_handle
,
1885 dev_err(&adapter
->pdev
->dev
, "MAC %pM set on VF %d Failed: %#x",
1887 return be_cmd_status(status
);
1890 ether_addr_copy(vf_cfg
->mac_addr
, mac
);
1895 static int be_get_vf_config(struct net_device
*netdev
, int vf
,
1896 struct ifla_vf_info
*vi
)
1898 struct be_adapter
*adapter
= netdev_priv(netdev
);
1899 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1901 if (!sriov_enabled(adapter
))
1904 if (vf
>= adapter
->num_vfs
)
1908 vi
->max_tx_rate
= vf_cfg
->tx_rate
;
1909 vi
->min_tx_rate
= 0;
1910 vi
->vlan
= vf_cfg
->vlan_tag
& VLAN_VID_MASK
;
1911 vi
->qos
= vf_cfg
->vlan_tag
>> VLAN_PRIO_SHIFT
;
1912 memcpy(&vi
->mac
, vf_cfg
->mac_addr
, ETH_ALEN
);
1913 vi
->linkstate
= adapter
->vf_cfg
[vf
].plink_tracking
;
1914 vi
->spoofchk
= adapter
->vf_cfg
[vf
].spoofchk
;
1919 static int be_set_vf_tvt(struct be_adapter
*adapter
, int vf
, u16 vlan
)
1921 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1922 u16 vids
[BE_NUM_VLANS_SUPPORTED
];
1923 int vf_if_id
= vf_cfg
->if_handle
;
1926 /* Enable Transparent VLAN Tagging */
1927 status
= be_cmd_set_hsw_config(adapter
, vlan
, vf
+ 1, vf_if_id
, 0, 0);
1931 /* Clear pre-programmed VLAN filters on VF if any, if TVT is enabled */
1933 status
= be_cmd_vlan_config(adapter
, vf_if_id
, vids
, 1, vf
+ 1);
1935 dev_info(&adapter
->pdev
->dev
,
1936 "Cleared guest VLANs on VF%d", vf
);
1938 /* After TVT is enabled, disallow VFs to program VLAN filters */
1939 if (vf_cfg
->privileges
& BE_PRIV_FILTMGMT
) {
1940 status
= be_cmd_set_fn_privileges(adapter
, vf_cfg
->privileges
&
1941 ~BE_PRIV_FILTMGMT
, vf
+ 1);
1943 vf_cfg
->privileges
&= ~BE_PRIV_FILTMGMT
;
1948 static int be_clear_vf_tvt(struct be_adapter
*adapter
, int vf
)
1950 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1951 struct device
*dev
= &adapter
->pdev
->dev
;
1954 /* Reset Transparent VLAN Tagging. */
1955 status
= be_cmd_set_hsw_config(adapter
, BE_RESET_VLAN_TAG_ID
, vf
+ 1,
1956 vf_cfg
->if_handle
, 0, 0);
1960 /* Allow VFs to program VLAN filtering */
1961 if (!(vf_cfg
->privileges
& BE_PRIV_FILTMGMT
)) {
1962 status
= be_cmd_set_fn_privileges(adapter
, vf_cfg
->privileges
|
1963 BE_PRIV_FILTMGMT
, vf
+ 1);
1965 vf_cfg
->privileges
|= BE_PRIV_FILTMGMT
;
1966 dev_info(dev
, "VF%d: FILTMGMT priv enabled", vf
);
1971 "Disable/re-enable i/f in VM to clear Transparent VLAN tag");
1975 static int be_set_vf_vlan(struct net_device
*netdev
, int vf
, u16 vlan
, u8 qos
,
1978 struct be_adapter
*adapter
= netdev_priv(netdev
);
1979 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1982 if (!sriov_enabled(adapter
))
1985 if (vf
>= adapter
->num_vfs
|| vlan
> 4095 || qos
> 7)
1988 if (vlan_proto
!= htons(ETH_P_8021Q
))
1989 return -EPROTONOSUPPORT
;
1992 vlan
|= qos
<< VLAN_PRIO_SHIFT
;
1993 status
= be_set_vf_tvt(adapter
, vf
, vlan
);
1995 status
= be_clear_vf_tvt(adapter
, vf
);
1999 dev_err(&adapter
->pdev
->dev
,
2000 "VLAN %d config on VF %d failed : %#x\n", vlan
, vf
,
2002 return be_cmd_status(status
);
2005 vf_cfg
->vlan_tag
= vlan
;
2009 static int be_set_vf_tx_rate(struct net_device
*netdev
, int vf
,
2010 int min_tx_rate
, int max_tx_rate
)
2012 struct be_adapter
*adapter
= netdev_priv(netdev
);
2013 struct device
*dev
= &adapter
->pdev
->dev
;
2014 int percent_rate
, status
= 0;
2018 if (!sriov_enabled(adapter
))
2021 if (vf
>= adapter
->num_vfs
)
2030 status
= be_cmd_link_status_query(adapter
, &link_speed
,
2036 dev_err(dev
, "TX-rate setting not allowed when link is down\n");
2041 if (max_tx_rate
< 100 || max_tx_rate
> link_speed
) {
2042 dev_err(dev
, "TX-rate must be between 100 and %d Mbps\n",
2048 /* On Skyhawk the QOS setting must be done only as a % value */
2049 percent_rate
= link_speed
/ 100;
2050 if (skyhawk_chip(adapter
) && (max_tx_rate
% percent_rate
)) {
2051 dev_err(dev
, "TX-rate must be a multiple of %d Mbps\n",
2058 status
= be_cmd_config_qos(adapter
, max_tx_rate
, link_speed
, vf
+ 1);
2062 adapter
->vf_cfg
[vf
].tx_rate
= max_tx_rate
;
2066 dev_err(dev
, "TX-rate setting of %dMbps on VF%d failed\n",
2068 return be_cmd_status(status
);
2071 static int be_set_vf_link_state(struct net_device
*netdev
, int vf
,
2074 struct be_adapter
*adapter
= netdev_priv(netdev
);
2077 if (!sriov_enabled(adapter
))
2080 if (vf
>= adapter
->num_vfs
)
2083 status
= be_cmd_set_logical_link_config(adapter
, link_state
, vf
+1);
2085 dev_err(&adapter
->pdev
->dev
,
2086 "Link state change on VF %d failed: %#x\n", vf
, status
);
2087 return be_cmd_status(status
);
2090 adapter
->vf_cfg
[vf
].plink_tracking
= link_state
;
2095 static int be_set_vf_spoofchk(struct net_device
*netdev
, int vf
, bool enable
)
2097 struct be_adapter
*adapter
= netdev_priv(netdev
);
2098 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
2102 if (!sriov_enabled(adapter
))
2105 if (vf
>= adapter
->num_vfs
)
2108 if (BEx_chip(adapter
))
2111 if (enable
== vf_cfg
->spoofchk
)
2114 spoofchk
= enable
? ENABLE_MAC_SPOOFCHK
: DISABLE_MAC_SPOOFCHK
;
2116 status
= be_cmd_set_hsw_config(adapter
, 0, vf
+ 1, vf_cfg
->if_handle
,
2119 dev_err(&adapter
->pdev
->dev
,
2120 "Spoofchk change on VF %d failed: %#x\n", vf
, status
);
2121 return be_cmd_status(status
);
2124 vf_cfg
->spoofchk
= enable
;
2128 static void be_aic_update(struct be_aic_obj
*aic
, u64 rx_pkts
, u64 tx_pkts
,
2131 aic
->rx_pkts_prev
= rx_pkts
;
2132 aic
->tx_reqs_prev
= tx_pkts
;
2136 static int be_get_new_eqd(struct be_eq_obj
*eqo
)
2138 struct be_adapter
*adapter
= eqo
->adapter
;
2140 struct be_aic_obj
*aic
;
2141 struct be_rx_obj
*rxo
;
2142 struct be_tx_obj
*txo
;
2143 u64 rx_pkts
= 0, tx_pkts
= 0;
2148 aic
= &adapter
->aic_obj
[eqo
->idx
];
2149 if (!adapter
->aic_enabled
) {
2156 for_all_rx_queues_on_eq(adapter
, eqo
, rxo
, i
) {
2158 start
= u64_stats_fetch_begin_irq(&rxo
->stats
.sync
);
2159 rx_pkts
+= rxo
->stats
.rx_pkts
;
2160 } while (u64_stats_fetch_retry_irq(&rxo
->stats
.sync
, start
));
2163 for_all_tx_queues_on_eq(adapter
, eqo
, txo
, i
) {
2165 start
= u64_stats_fetch_begin_irq(&txo
->stats
.sync
);
2166 tx_pkts
+= txo
->stats
.tx_reqs
;
2167 } while (u64_stats_fetch_retry_irq(&txo
->stats
.sync
, start
));
2170 /* Skip, if wrapped around or first calculation */
2172 if (!aic
->jiffies
|| time_before(now
, aic
->jiffies
) ||
2173 rx_pkts
< aic
->rx_pkts_prev
||
2174 tx_pkts
< aic
->tx_reqs_prev
) {
2175 be_aic_update(aic
, rx_pkts
, tx_pkts
, now
);
2176 return aic
->prev_eqd
;
2179 delta
= jiffies_to_msecs(now
- aic
->jiffies
);
2181 return aic
->prev_eqd
;
2183 pps
= (((u32
)(rx_pkts
- aic
->rx_pkts_prev
) * 1000) / delta
) +
2184 (((u32
)(tx_pkts
- aic
->tx_reqs_prev
) * 1000) / delta
);
2185 eqd
= (pps
/ 15000) << 2;
2189 eqd
= min_t(u32
, eqd
, aic
->max_eqd
);
2190 eqd
= max_t(u32
, eqd
, aic
->min_eqd
);
2192 be_aic_update(aic
, rx_pkts
, tx_pkts
, now
);
2197 /* For Skyhawk-R only */
2198 static u32
be_get_eq_delay_mult_enc(struct be_eq_obj
*eqo
)
2200 struct be_adapter
*adapter
= eqo
->adapter
;
2201 struct be_aic_obj
*aic
= &adapter
->aic_obj
[eqo
->idx
];
2202 ulong now
= jiffies
;
2206 if (!adapter
->aic_enabled
)
2209 if (jiffies_to_msecs(now
- aic
->jiffies
) < 1)
2210 eqd
= aic
->prev_eqd
;
2212 eqd
= be_get_new_eqd(eqo
);
2215 mult_enc
= R2I_DLY_ENC_1
;
2217 mult_enc
= R2I_DLY_ENC_2
;
2219 mult_enc
= R2I_DLY_ENC_3
;
2221 mult_enc
= R2I_DLY_ENC_0
;
2223 aic
->prev_eqd
= eqd
;
2228 void be_eqd_update(struct be_adapter
*adapter
, bool force_update
)
2230 struct be_set_eqd set_eqd
[MAX_EVT_QS
];
2231 struct be_aic_obj
*aic
;
2232 struct be_eq_obj
*eqo
;
2233 int i
, num
= 0, eqd
;
2235 for_all_evt_queues(adapter
, eqo
, i
) {
2236 aic
= &adapter
->aic_obj
[eqo
->idx
];
2237 eqd
= be_get_new_eqd(eqo
);
2238 if (force_update
|| eqd
!= aic
->prev_eqd
) {
2239 set_eqd
[num
].delay_multiplier
= (eqd
* 65)/100;
2240 set_eqd
[num
].eq_id
= eqo
->q
.id
;
2241 aic
->prev_eqd
= eqd
;
2247 be_cmd_modify_eqd(adapter
, set_eqd
, num
);
2250 static void be_rx_stats_update(struct be_rx_obj
*rxo
,
2251 struct be_rx_compl_info
*rxcp
)
2253 struct be_rx_stats
*stats
= rx_stats(rxo
);
2255 u64_stats_update_begin(&stats
->sync
);
2257 stats
->rx_bytes
+= rxcp
->pkt_size
;
2260 stats
->rx_vxlan_offload_pkts
++;
2261 if (rxcp
->pkt_type
== BE_MULTICAST_PACKET
)
2262 stats
->rx_mcast_pkts
++;
2264 stats
->rx_compl_err
++;
2265 u64_stats_update_end(&stats
->sync
);
2268 static inline bool csum_passed(struct be_rx_compl_info
*rxcp
)
2270 /* L4 checksum is not reliable for non TCP/UDP packets.
2271 * Also ignore ipcksm for ipv6 pkts
2273 return (rxcp
->tcpf
|| rxcp
->udpf
) && rxcp
->l4_csum
&&
2274 (rxcp
->ip_csum
|| rxcp
->ipv6
) && !rxcp
->err
;
2277 static struct be_rx_page_info
*get_rx_page_info(struct be_rx_obj
*rxo
)
2279 struct be_adapter
*adapter
= rxo
->adapter
;
2280 struct be_rx_page_info
*rx_page_info
;
2281 struct be_queue_info
*rxq
= &rxo
->q
;
2282 u32 frag_idx
= rxq
->tail
;
2284 rx_page_info
= &rxo
->page_info_tbl
[frag_idx
];
2285 BUG_ON(!rx_page_info
->page
);
2287 if (rx_page_info
->last_frag
) {
2288 dma_unmap_page(&adapter
->pdev
->dev
,
2289 dma_unmap_addr(rx_page_info
, bus
),
2290 adapter
->big_page_size
, DMA_FROM_DEVICE
);
2291 rx_page_info
->last_frag
= false;
2293 dma_sync_single_for_cpu(&adapter
->pdev
->dev
,
2294 dma_unmap_addr(rx_page_info
, bus
),
2295 rx_frag_size
, DMA_FROM_DEVICE
);
2298 queue_tail_inc(rxq
);
2299 atomic_dec(&rxq
->used
);
2300 return rx_page_info
;
2303 /* Throwaway the data in the Rx completion */
2304 static void be_rx_compl_discard(struct be_rx_obj
*rxo
,
2305 struct be_rx_compl_info
*rxcp
)
2307 struct be_rx_page_info
*page_info
;
2308 u16 i
, num_rcvd
= rxcp
->num_rcvd
;
2310 for (i
= 0; i
< num_rcvd
; i
++) {
2311 page_info
= get_rx_page_info(rxo
);
2312 put_page(page_info
->page
);
2313 memset(page_info
, 0, sizeof(*page_info
));
2318 * skb_fill_rx_data forms a complete skb for an ether frame
2319 * indicated by rxcp.
2321 static void skb_fill_rx_data(struct be_rx_obj
*rxo
, struct sk_buff
*skb
,
2322 struct be_rx_compl_info
*rxcp
)
2324 struct be_rx_page_info
*page_info
;
2326 u16 hdr_len
, curr_frag_len
, remaining
;
2329 page_info
= get_rx_page_info(rxo
);
2330 start
= page_address(page_info
->page
) + page_info
->page_offset
;
2333 /* Copy data in the first descriptor of this completion */
2334 curr_frag_len
= min(rxcp
->pkt_size
, rx_frag_size
);
2336 skb
->len
= curr_frag_len
;
2337 if (curr_frag_len
<= BE_HDR_LEN
) { /* tiny packet */
2338 memcpy(skb
->data
, start
, curr_frag_len
);
2339 /* Complete packet has now been moved to data */
2340 put_page(page_info
->page
);
2342 skb
->tail
+= curr_frag_len
;
2345 memcpy(skb
->data
, start
, hdr_len
);
2346 skb_shinfo(skb
)->nr_frags
= 1;
2347 skb_frag_set_page(skb
, 0, page_info
->page
);
2348 skb_frag_off_set(&skb_shinfo(skb
)->frags
[0],
2349 page_info
->page_offset
+ hdr_len
);
2350 skb_frag_size_set(&skb_shinfo(skb
)->frags
[0],
2351 curr_frag_len
- hdr_len
);
2352 skb
->data_len
= curr_frag_len
- hdr_len
;
2353 skb
->truesize
+= rx_frag_size
;
2354 skb
->tail
+= hdr_len
;
2356 page_info
->page
= NULL
;
2358 if (rxcp
->pkt_size
<= rx_frag_size
) {
2359 BUG_ON(rxcp
->num_rcvd
!= 1);
2363 /* More frags present for this completion */
2364 remaining
= rxcp
->pkt_size
- curr_frag_len
;
2365 for (i
= 1, j
= 0; i
< rxcp
->num_rcvd
; i
++) {
2366 page_info
= get_rx_page_info(rxo
);
2367 curr_frag_len
= min(remaining
, rx_frag_size
);
2369 /* Coalesce all frags from the same physical page in one slot */
2370 if (page_info
->page_offset
== 0) {
2373 skb_frag_set_page(skb
, j
, page_info
->page
);
2374 skb_frag_off_set(&skb_shinfo(skb
)->frags
[j
],
2375 page_info
->page_offset
);
2376 skb_frag_size_set(&skb_shinfo(skb
)->frags
[j
], 0);
2377 skb_shinfo(skb
)->nr_frags
++;
2379 put_page(page_info
->page
);
2382 skb_frag_size_add(&skb_shinfo(skb
)->frags
[j
], curr_frag_len
);
2383 skb
->len
+= curr_frag_len
;
2384 skb
->data_len
+= curr_frag_len
;
2385 skb
->truesize
+= rx_frag_size
;
2386 remaining
-= curr_frag_len
;
2387 page_info
->page
= NULL
;
2389 BUG_ON(j
> MAX_SKB_FRAGS
);
2392 /* Process the RX completion indicated by rxcp when GRO is disabled */
2393 static void be_rx_compl_process(struct be_rx_obj
*rxo
, struct napi_struct
*napi
,
2394 struct be_rx_compl_info
*rxcp
)
2396 struct be_adapter
*adapter
= rxo
->adapter
;
2397 struct net_device
*netdev
= adapter
->netdev
;
2398 struct sk_buff
*skb
;
2400 skb
= netdev_alloc_skb_ip_align(netdev
, BE_RX_SKB_ALLOC_SIZE
);
2401 if (unlikely(!skb
)) {
2402 rx_stats(rxo
)->rx_drops_no_skbs
++;
2403 be_rx_compl_discard(rxo
, rxcp
);
2407 skb_fill_rx_data(rxo
, skb
, rxcp
);
2409 if (likely((netdev
->features
& NETIF_F_RXCSUM
) && csum_passed(rxcp
)))
2410 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
2412 skb_checksum_none_assert(skb
);
2414 skb
->protocol
= eth_type_trans(skb
, netdev
);
2415 skb_record_rx_queue(skb
, rxo
- &adapter
->rx_obj
[0]);
2416 if (netdev
->features
& NETIF_F_RXHASH
)
2417 skb_set_hash(skb
, rxcp
->rss_hash
, PKT_HASH_TYPE_L3
);
2419 skb
->csum_level
= rxcp
->tunneled
;
2420 skb_mark_napi_id(skb
, napi
);
2423 __vlan_hwaccel_put_tag(skb
, htons(ETH_P_8021Q
), rxcp
->vlan_tag
);
2425 netif_receive_skb(skb
);
2428 /* Process the RX completion indicated by rxcp when GRO is enabled */
2429 static void be_rx_compl_process_gro(struct be_rx_obj
*rxo
,
2430 struct napi_struct
*napi
,
2431 struct be_rx_compl_info
*rxcp
)
2433 struct be_adapter
*adapter
= rxo
->adapter
;
2434 struct be_rx_page_info
*page_info
;
2435 struct sk_buff
*skb
= NULL
;
2436 u16 remaining
, curr_frag_len
;
2439 skb
= napi_get_frags(napi
);
2441 be_rx_compl_discard(rxo
, rxcp
);
2445 remaining
= rxcp
->pkt_size
;
2446 for (i
= 0, j
= -1; i
< rxcp
->num_rcvd
; i
++) {
2447 page_info
= get_rx_page_info(rxo
);
2449 curr_frag_len
= min(remaining
, rx_frag_size
);
2451 /* Coalesce all frags from the same physical page in one slot */
2452 if (i
== 0 || page_info
->page_offset
== 0) {
2453 /* First frag or Fresh page */
2455 skb_frag_set_page(skb
, j
, page_info
->page
);
2456 skb_frag_off_set(&skb_shinfo(skb
)->frags
[j
],
2457 page_info
->page_offset
);
2458 skb_frag_size_set(&skb_shinfo(skb
)->frags
[j
], 0);
2460 put_page(page_info
->page
);
2462 skb_frag_size_add(&skb_shinfo(skb
)->frags
[j
], curr_frag_len
);
2463 skb
->truesize
+= rx_frag_size
;
2464 remaining
-= curr_frag_len
;
2465 memset(page_info
, 0, sizeof(*page_info
));
2467 BUG_ON(j
> MAX_SKB_FRAGS
);
2469 skb_shinfo(skb
)->nr_frags
= j
+ 1;
2470 skb
->len
= rxcp
->pkt_size
;
2471 skb
->data_len
= rxcp
->pkt_size
;
2472 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
2473 skb_record_rx_queue(skb
, rxo
- &adapter
->rx_obj
[0]);
2474 if (adapter
->netdev
->features
& NETIF_F_RXHASH
)
2475 skb_set_hash(skb
, rxcp
->rss_hash
, PKT_HASH_TYPE_L3
);
2477 skb
->csum_level
= rxcp
->tunneled
;
2480 __vlan_hwaccel_put_tag(skb
, htons(ETH_P_8021Q
), rxcp
->vlan_tag
);
2482 napi_gro_frags(napi
);
2485 static void be_parse_rx_compl_v1(struct be_eth_rx_compl
*compl,
2486 struct be_rx_compl_info
*rxcp
)
2488 rxcp
->pkt_size
= GET_RX_COMPL_V1_BITS(pktsize
, compl);
2489 rxcp
->vlanf
= GET_RX_COMPL_V1_BITS(vtp
, compl);
2490 rxcp
->err
= GET_RX_COMPL_V1_BITS(err
, compl);
2491 rxcp
->tcpf
= GET_RX_COMPL_V1_BITS(tcpf
, compl);
2492 rxcp
->udpf
= GET_RX_COMPL_V1_BITS(udpf
, compl);
2493 rxcp
->ip_csum
= GET_RX_COMPL_V1_BITS(ipcksm
, compl);
2494 rxcp
->l4_csum
= GET_RX_COMPL_V1_BITS(l4_cksm
, compl);
2495 rxcp
->ipv6
= GET_RX_COMPL_V1_BITS(ip_version
, compl);
2496 rxcp
->num_rcvd
= GET_RX_COMPL_V1_BITS(numfrags
, compl);
2497 rxcp
->pkt_type
= GET_RX_COMPL_V1_BITS(cast_enc
, compl);
2498 rxcp
->rss_hash
= GET_RX_COMPL_V1_BITS(rsshash
, compl);
2500 rxcp
->qnq
= GET_RX_COMPL_V1_BITS(qnq
, compl);
2501 rxcp
->vlan_tag
= GET_RX_COMPL_V1_BITS(vlan_tag
, compl);
2503 rxcp
->port
= GET_RX_COMPL_V1_BITS(port
, compl);
2505 GET_RX_COMPL_V1_BITS(tunneled
, compl);
2508 static void be_parse_rx_compl_v0(struct be_eth_rx_compl
*compl,
2509 struct be_rx_compl_info
*rxcp
)
2511 rxcp
->pkt_size
= GET_RX_COMPL_V0_BITS(pktsize
, compl);
2512 rxcp
->vlanf
= GET_RX_COMPL_V0_BITS(vtp
, compl);
2513 rxcp
->err
= GET_RX_COMPL_V0_BITS(err
, compl);
2514 rxcp
->tcpf
= GET_RX_COMPL_V0_BITS(tcpf
, compl);
2515 rxcp
->udpf
= GET_RX_COMPL_V0_BITS(udpf
, compl);
2516 rxcp
->ip_csum
= GET_RX_COMPL_V0_BITS(ipcksm
, compl);
2517 rxcp
->l4_csum
= GET_RX_COMPL_V0_BITS(l4_cksm
, compl);
2518 rxcp
->ipv6
= GET_RX_COMPL_V0_BITS(ip_version
, compl);
2519 rxcp
->num_rcvd
= GET_RX_COMPL_V0_BITS(numfrags
, compl);
2520 rxcp
->pkt_type
= GET_RX_COMPL_V0_BITS(cast_enc
, compl);
2521 rxcp
->rss_hash
= GET_RX_COMPL_V0_BITS(rsshash
, compl);
2523 rxcp
->qnq
= GET_RX_COMPL_V0_BITS(qnq
, compl);
2524 rxcp
->vlan_tag
= GET_RX_COMPL_V0_BITS(vlan_tag
, compl);
2526 rxcp
->port
= GET_RX_COMPL_V0_BITS(port
, compl);
2527 rxcp
->ip_frag
= GET_RX_COMPL_V0_BITS(ip_frag
, compl);
2530 static struct be_rx_compl_info
*be_rx_compl_get(struct be_rx_obj
*rxo
)
2532 struct be_eth_rx_compl
*compl = queue_tail_node(&rxo
->cq
);
2533 struct be_rx_compl_info
*rxcp
= &rxo
->rxcp
;
2534 struct be_adapter
*adapter
= rxo
->adapter
;
2536 /* For checking the valid bit it is Ok to use either definition as the
2537 * valid bit is at the same position in both v0 and v1 Rx compl */
2538 if (compl->dw
[offsetof(struct amap_eth_rx_compl_v1
, valid
) / 32] == 0)
2542 be_dws_le_to_cpu(compl, sizeof(*compl));
2544 if (adapter
->be3_native
)
2545 be_parse_rx_compl_v1(compl, rxcp
);
2547 be_parse_rx_compl_v0(compl, rxcp
);
2553 /* In QNQ modes, if qnq bit is not set, then the packet was
2554 * tagged only with the transparent outer vlan-tag and must
2555 * not be treated as a vlan packet by host
2557 if (be_is_qnq_mode(adapter
) && !rxcp
->qnq
)
2560 if (!lancer_chip(adapter
))
2561 rxcp
->vlan_tag
= swab16(rxcp
->vlan_tag
);
2563 if (adapter
->pvid
== (rxcp
->vlan_tag
& VLAN_VID_MASK
) &&
2564 !test_bit(rxcp
->vlan_tag
, adapter
->vids
))
2568 /* As the compl has been parsed, reset it; we wont touch it again */
2569 compl->dw
[offsetof(struct amap_eth_rx_compl_v1
, valid
) / 32] = 0;
2571 queue_tail_inc(&rxo
->cq
);
2575 static inline struct page
*be_alloc_pages(u32 size
, gfp_t gfp
)
2577 u32 order
= get_order(size
);
2581 return alloc_pages(gfp
, order
);
2585 * Allocate a page, split it to fragments of size rx_frag_size and post as
2586 * receive buffers to BE
2588 static void be_post_rx_frags(struct be_rx_obj
*rxo
, gfp_t gfp
, u32 frags_needed
)
2590 struct be_adapter
*adapter
= rxo
->adapter
;
2591 struct be_rx_page_info
*page_info
= NULL
, *prev_page_info
= NULL
;
2592 struct be_queue_info
*rxq
= &rxo
->q
;
2593 struct page
*pagep
= NULL
;
2594 struct device
*dev
= &adapter
->pdev
->dev
;
2595 struct be_eth_rx_d
*rxd
;
2596 u64 page_dmaaddr
= 0, frag_dmaaddr
;
2597 u32 posted
, page_offset
= 0, notify
= 0;
2599 page_info
= &rxo
->page_info_tbl
[rxq
->head
];
2600 for (posted
= 0; posted
< frags_needed
&& !page_info
->page
; posted
++) {
2602 pagep
= be_alloc_pages(adapter
->big_page_size
, gfp
);
2603 if (unlikely(!pagep
)) {
2604 rx_stats(rxo
)->rx_post_fail
++;
2607 page_dmaaddr
= dma_map_page(dev
, pagep
, 0,
2608 adapter
->big_page_size
,
2610 if (dma_mapping_error(dev
, page_dmaaddr
)) {
2613 adapter
->drv_stats
.dma_map_errors
++;
2619 page_offset
+= rx_frag_size
;
2621 page_info
->page_offset
= page_offset
;
2622 page_info
->page
= pagep
;
2624 rxd
= queue_head_node(rxq
);
2625 frag_dmaaddr
= page_dmaaddr
+ page_info
->page_offset
;
2626 rxd
->fragpa_lo
= cpu_to_le32(frag_dmaaddr
& 0xFFFFFFFF);
2627 rxd
->fragpa_hi
= cpu_to_le32(upper_32_bits(frag_dmaaddr
));
2629 /* Any space left in the current big page for another frag? */
2630 if ((page_offset
+ rx_frag_size
+ rx_frag_size
) >
2631 adapter
->big_page_size
) {
2633 page_info
->last_frag
= true;
2634 dma_unmap_addr_set(page_info
, bus
, page_dmaaddr
);
2636 dma_unmap_addr_set(page_info
, bus
, frag_dmaaddr
);
2639 prev_page_info
= page_info
;
2640 queue_head_inc(rxq
);
2641 page_info
= &rxo
->page_info_tbl
[rxq
->head
];
2644 /* Mark the last frag of a page when we break out of the above loop
2645 * with no more slots available in the RXQ
2648 prev_page_info
->last_frag
= true;
2649 dma_unmap_addr_set(prev_page_info
, bus
, page_dmaaddr
);
2653 atomic_add(posted
, &rxq
->used
);
2654 if (rxo
->rx_post_starved
)
2655 rxo
->rx_post_starved
= false;
2657 notify
= min(MAX_NUM_POST_ERX_DB
, posted
);
2658 be_rxq_notify(adapter
, rxq
->id
, notify
);
2661 } else if (atomic_read(&rxq
->used
) == 0) {
2662 /* Let be_worker replenish when memory is available */
2663 rxo
->rx_post_starved
= true;
2667 static inline void be_update_tx_err(struct be_tx_obj
*txo
, u8 status
)
2670 case BE_TX_COMP_HDR_PARSE_ERR
:
2671 tx_stats(txo
)->tx_hdr_parse_err
++;
2673 case BE_TX_COMP_NDMA_ERR
:
2674 tx_stats(txo
)->tx_dma_err
++;
2676 case BE_TX_COMP_ACL_ERR
:
2677 tx_stats(txo
)->tx_spoof_check_err
++;
2682 static inline void lancer_update_tx_err(struct be_tx_obj
*txo
, u8 status
)
2685 case LANCER_TX_COMP_LSO_ERR
:
2686 tx_stats(txo
)->tx_tso_err
++;
2688 case LANCER_TX_COMP_HSW_DROP_MAC_ERR
:
2689 case LANCER_TX_COMP_HSW_DROP_VLAN_ERR
:
2690 tx_stats(txo
)->tx_spoof_check_err
++;
2692 case LANCER_TX_COMP_QINQ_ERR
:
2693 tx_stats(txo
)->tx_qinq_err
++;
2695 case LANCER_TX_COMP_PARITY_ERR
:
2696 tx_stats(txo
)->tx_internal_parity_err
++;
2698 case LANCER_TX_COMP_DMA_ERR
:
2699 tx_stats(txo
)->tx_dma_err
++;
2701 case LANCER_TX_COMP_SGE_ERR
:
2702 tx_stats(txo
)->tx_sge_err
++;
2707 static struct be_tx_compl_info
*be_tx_compl_get(struct be_adapter
*adapter
,
2708 struct be_tx_obj
*txo
)
2710 struct be_queue_info
*tx_cq
= &txo
->cq
;
2711 struct be_tx_compl_info
*txcp
= &txo
->txcp
;
2712 struct be_eth_tx_compl
*compl = queue_tail_node(tx_cq
);
2714 if (compl->dw
[offsetof(struct amap_eth_tx_compl
, valid
) / 32] == 0)
2717 /* Ensure load ordering of valid bit dword and other dwords below */
2719 be_dws_le_to_cpu(compl, sizeof(*compl));
2721 txcp
->status
= GET_TX_COMPL_BITS(status
, compl);
2722 txcp
->end_index
= GET_TX_COMPL_BITS(wrb_index
, compl);
2725 if (lancer_chip(adapter
)) {
2726 lancer_update_tx_err(txo
, txcp
->status
);
2727 /* Reset the adapter incase of TSO,
2728 * SGE or Parity error
2730 if (txcp
->status
== LANCER_TX_COMP_LSO_ERR
||
2731 txcp
->status
== LANCER_TX_COMP_PARITY_ERR
||
2732 txcp
->status
== LANCER_TX_COMP_SGE_ERR
)
2733 be_set_error(adapter
, BE_ERROR_TX
);
2735 be_update_tx_err(txo
, txcp
->status
);
2739 if (be_check_error(adapter
, BE_ERROR_TX
))
2742 compl->dw
[offsetof(struct amap_eth_tx_compl
, valid
) / 32] = 0;
2743 queue_tail_inc(tx_cq
);
2747 static u16
be_tx_compl_process(struct be_adapter
*adapter
,
2748 struct be_tx_obj
*txo
, u16 last_index
)
2750 struct sk_buff
**sent_skbs
= txo
->sent_skb_list
;
2751 struct be_queue_info
*txq
= &txo
->q
;
2752 struct sk_buff
*skb
= NULL
;
2753 bool unmap_skb_hdr
= false;
2754 struct be_eth_wrb
*wrb
;
2759 if (sent_skbs
[txq
->tail
]) {
2760 /* Free skb from prev req */
2762 dev_consume_skb_any(skb
);
2763 skb
= sent_skbs
[txq
->tail
];
2764 sent_skbs
[txq
->tail
] = NULL
;
2765 queue_tail_inc(txq
); /* skip hdr wrb */
2767 unmap_skb_hdr
= true;
2769 wrb
= queue_tail_node(txq
);
2770 frag_index
= txq
->tail
;
2771 unmap_tx_frag(&adapter
->pdev
->dev
, wrb
,
2772 (unmap_skb_hdr
&& skb_headlen(skb
)));
2773 unmap_skb_hdr
= false;
2774 queue_tail_inc(txq
);
2776 } while (frag_index
!= last_index
);
2777 dev_consume_skb_any(skb
);
2782 /* Return the number of events in the event queue */
2783 static inline int events_get(struct be_eq_obj
*eqo
)
2785 struct be_eq_entry
*eqe
;
2789 eqe
= queue_tail_node(&eqo
->q
);
2796 queue_tail_inc(&eqo
->q
);
2802 /* Leaves the EQ is disarmed state */
2803 static void be_eq_clean(struct be_eq_obj
*eqo
)
2805 int num
= events_get(eqo
);
2807 be_eq_notify(eqo
->adapter
, eqo
->q
.id
, false, true, num
, 0);
2810 /* Free posted rx buffers that were not used */
2811 static void be_rxq_clean(struct be_rx_obj
*rxo
)
2813 struct be_queue_info
*rxq
= &rxo
->q
;
2814 struct be_rx_page_info
*page_info
;
2816 while (atomic_read(&rxq
->used
) > 0) {
2817 page_info
= get_rx_page_info(rxo
);
2818 put_page(page_info
->page
);
2819 memset(page_info
, 0, sizeof(*page_info
));
2821 BUG_ON(atomic_read(&rxq
->used
));
2826 static void be_rx_cq_clean(struct be_rx_obj
*rxo
)
2828 struct be_queue_info
*rx_cq
= &rxo
->cq
;
2829 struct be_rx_compl_info
*rxcp
;
2830 struct be_adapter
*adapter
= rxo
->adapter
;
2833 /* Consume pending rx completions.
2834 * Wait for the flush completion (identified by zero num_rcvd)
2835 * to arrive. Notify CQ even when there are no more CQ entries
2836 * for HW to flush partially coalesced CQ entries.
2837 * In Lancer, there is no need to wait for flush compl.
2840 rxcp
= be_rx_compl_get(rxo
);
2842 if (lancer_chip(adapter
))
2845 if (flush_wait
++ > 50 ||
2846 be_check_error(adapter
,
2848 dev_warn(&adapter
->pdev
->dev
,
2849 "did not receive flush compl\n");
2852 be_cq_notify(adapter
, rx_cq
->id
, true, 0);
2855 be_rx_compl_discard(rxo
, rxcp
);
2856 be_cq_notify(adapter
, rx_cq
->id
, false, 1);
2857 if (rxcp
->num_rcvd
== 0)
2862 /* After cleanup, leave the CQ in unarmed state */
2863 be_cq_notify(adapter
, rx_cq
->id
, false, 0);
2866 static void be_tx_compl_clean(struct be_adapter
*adapter
)
2868 struct device
*dev
= &adapter
->pdev
->dev
;
2869 u16 cmpl
= 0, timeo
= 0, num_wrbs
= 0;
2870 struct be_tx_compl_info
*txcp
;
2871 struct be_queue_info
*txq
;
2872 u32 end_idx
, notified_idx
;
2873 struct be_tx_obj
*txo
;
2874 int i
, pending_txqs
;
2876 /* Stop polling for compls when HW has been silent for 10ms */
2878 pending_txqs
= adapter
->num_tx_qs
;
2880 for_all_tx_queues(adapter
, txo
, i
) {
2884 while ((txcp
= be_tx_compl_get(adapter
, txo
))) {
2886 be_tx_compl_process(adapter
, txo
,
2891 be_cq_notify(adapter
, txo
->cq
.id
, false, cmpl
);
2892 atomic_sub(num_wrbs
, &txq
->used
);
2895 if (!be_is_tx_compl_pending(txo
))
2899 if (pending_txqs
== 0 || ++timeo
> 10 ||
2900 be_check_error(adapter
, BE_ERROR_HW
))
2906 /* Free enqueued TX that was never notified to HW */
2907 for_all_tx_queues(adapter
, txo
, i
) {
2910 if (atomic_read(&txq
->used
)) {
2911 dev_info(dev
, "txq%d: cleaning %d pending tx-wrbs\n",
2912 i
, atomic_read(&txq
->used
));
2913 notified_idx
= txq
->tail
;
2914 end_idx
= txq
->tail
;
2915 index_adv(&end_idx
, atomic_read(&txq
->used
) - 1,
2917 /* Use the tx-compl process logic to handle requests
2918 * that were not sent to the HW.
2920 num_wrbs
= be_tx_compl_process(adapter
, txo
, end_idx
);
2921 atomic_sub(num_wrbs
, &txq
->used
);
2922 BUG_ON(atomic_read(&txq
->used
));
2923 txo
->pend_wrb_cnt
= 0;
2924 /* Since hw was never notified of these requests,
2927 txq
->head
= notified_idx
;
2928 txq
->tail
= notified_idx
;
2933 static void be_evt_queues_destroy(struct be_adapter
*adapter
)
2935 struct be_eq_obj
*eqo
;
2938 for_all_evt_queues(adapter
, eqo
, i
) {
2939 if (eqo
->q
.created
) {
2941 be_cmd_q_destroy(adapter
, &eqo
->q
, QTYPE_EQ
);
2942 netif_napi_del(&eqo
->napi
);
2943 free_cpumask_var(eqo
->affinity_mask
);
2945 be_queue_free(adapter
, &eqo
->q
);
2949 static int be_evt_queues_create(struct be_adapter
*adapter
)
2951 struct be_queue_info
*eq
;
2952 struct be_eq_obj
*eqo
;
2953 struct be_aic_obj
*aic
;
2956 /* need enough EQs to service both RX and TX queues */
2957 adapter
->num_evt_qs
= min_t(u16
, num_irqs(adapter
),
2958 max(adapter
->cfg_num_rx_irqs
,
2959 adapter
->cfg_num_tx_irqs
));
2961 adapter
->aic_enabled
= true;
2963 for_all_evt_queues(adapter
, eqo
, i
) {
2964 int numa_node
= dev_to_node(&adapter
->pdev
->dev
);
2966 aic
= &adapter
->aic_obj
[i
];
2967 eqo
->adapter
= adapter
;
2969 aic
->max_eqd
= BE_MAX_EQD
;
2972 rc
= be_queue_alloc(adapter
, eq
, EVNT_Q_LEN
,
2973 sizeof(struct be_eq_entry
));
2977 rc
= be_cmd_eq_create(adapter
, eqo
);
2981 if (!zalloc_cpumask_var(&eqo
->affinity_mask
, GFP_KERNEL
))
2983 cpumask_set_cpu(cpumask_local_spread(i
, numa_node
),
2984 eqo
->affinity_mask
);
2985 netif_napi_add(adapter
->netdev
, &eqo
->napi
, be_poll
,
2991 static void be_mcc_queues_destroy(struct be_adapter
*adapter
)
2993 struct be_queue_info
*q
;
2995 q
= &adapter
->mcc_obj
.q
;
2997 be_cmd_q_destroy(adapter
, q
, QTYPE_MCCQ
);
2998 be_queue_free(adapter
, q
);
3000 q
= &adapter
->mcc_obj
.cq
;
3002 be_cmd_q_destroy(adapter
, q
, QTYPE_CQ
);
3003 be_queue_free(adapter
, q
);
3006 /* Must be called only after TX qs are created as MCC shares TX EQ */
3007 static int be_mcc_queues_create(struct be_adapter
*adapter
)
3009 struct be_queue_info
*q
, *cq
;
3011 cq
= &adapter
->mcc_obj
.cq
;
3012 if (be_queue_alloc(adapter
, cq
, MCC_CQ_LEN
,
3013 sizeof(struct be_mcc_compl
)))
3016 /* Use the default EQ for MCC completions */
3017 if (be_cmd_cq_create(adapter
, cq
, &mcc_eqo(adapter
)->q
, true, 0))
3020 q
= &adapter
->mcc_obj
.q
;
3021 if (be_queue_alloc(adapter
, q
, MCC_Q_LEN
, sizeof(struct be_mcc_wrb
)))
3022 goto mcc_cq_destroy
;
3024 if (be_cmd_mccq_create(adapter
, q
, cq
))
3030 be_queue_free(adapter
, q
);
3032 be_cmd_q_destroy(adapter
, cq
, QTYPE_CQ
);
3034 be_queue_free(adapter
, cq
);
3039 static void be_tx_queues_destroy(struct be_adapter
*adapter
)
3041 struct be_queue_info
*q
;
3042 struct be_tx_obj
*txo
;
3045 for_all_tx_queues(adapter
, txo
, i
) {
3048 be_cmd_q_destroy(adapter
, q
, QTYPE_TXQ
);
3049 be_queue_free(adapter
, q
);
3053 be_cmd_q_destroy(adapter
, q
, QTYPE_CQ
);
3054 be_queue_free(adapter
, q
);
3058 static int be_tx_qs_create(struct be_adapter
*adapter
)
3060 struct be_queue_info
*cq
;
3061 struct be_tx_obj
*txo
;
3062 struct be_eq_obj
*eqo
;
3065 adapter
->num_tx_qs
= min(adapter
->num_evt_qs
, adapter
->cfg_num_tx_irqs
);
3067 for_all_tx_queues(adapter
, txo
, i
) {
3069 status
= be_queue_alloc(adapter
, cq
, TX_CQ_LEN
,
3070 sizeof(struct be_eth_tx_compl
));
3074 u64_stats_init(&txo
->stats
.sync
);
3075 u64_stats_init(&txo
->stats
.sync_compl
);
3077 /* If num_evt_qs is less than num_tx_qs, then more than
3078 * one txq share an eq
3080 eqo
= &adapter
->eq_obj
[i
% adapter
->num_evt_qs
];
3081 status
= be_cmd_cq_create(adapter
, cq
, &eqo
->q
, false, 3);
3085 status
= be_queue_alloc(adapter
, &txo
->q
, TX_Q_LEN
,
3086 sizeof(struct be_eth_wrb
));
3090 status
= be_cmd_txq_create(adapter
, txo
);
3094 netif_set_xps_queue(adapter
->netdev
, eqo
->affinity_mask
,
3098 dev_info(&adapter
->pdev
->dev
, "created %d TX queue(s)\n",
3099 adapter
->num_tx_qs
);
3103 static void be_rx_cqs_destroy(struct be_adapter
*adapter
)
3105 struct be_queue_info
*q
;
3106 struct be_rx_obj
*rxo
;
3109 for_all_rx_queues(adapter
, rxo
, i
) {
3112 be_cmd_q_destroy(adapter
, q
, QTYPE_CQ
);
3113 be_queue_free(adapter
, q
);
3117 static int be_rx_cqs_create(struct be_adapter
*adapter
)
3119 struct be_queue_info
*eq
, *cq
;
3120 struct be_rx_obj
*rxo
;
3123 adapter
->num_rss_qs
=
3124 min(adapter
->num_evt_qs
, adapter
->cfg_num_rx_irqs
);
3126 /* We'll use RSS only if atleast 2 RSS rings are supported. */
3127 if (adapter
->num_rss_qs
< 2)
3128 adapter
->num_rss_qs
= 0;
3130 adapter
->num_rx_qs
= adapter
->num_rss_qs
+ adapter
->need_def_rxq
;
3132 /* When the interface is not capable of RSS rings (and there is no
3133 * need to create a default RXQ) we'll still need one RXQ
3135 if (adapter
->num_rx_qs
== 0)
3136 adapter
->num_rx_qs
= 1;
3138 adapter
->big_page_size
= (1 << get_order(rx_frag_size
)) * PAGE_SIZE
;
3139 for_all_rx_queues(adapter
, rxo
, i
) {
3140 rxo
->adapter
= adapter
;
3142 rc
= be_queue_alloc(adapter
, cq
, RX_CQ_LEN
,
3143 sizeof(struct be_eth_rx_compl
));
3147 u64_stats_init(&rxo
->stats
.sync
);
3148 eq
= &adapter
->eq_obj
[i
% adapter
->num_evt_qs
].q
;
3149 rc
= be_cmd_cq_create(adapter
, cq
, eq
, false, 3);
3154 dev_info(&adapter
->pdev
->dev
,
3155 "created %d RX queue(s)\n", adapter
->num_rx_qs
);
3159 static irqreturn_t
be_intx(int irq
, void *dev
)
3161 struct be_eq_obj
*eqo
= dev
;
3162 struct be_adapter
*adapter
= eqo
->adapter
;
3165 /* IRQ is not expected when NAPI is scheduled as the EQ
3166 * will not be armed.
3167 * But, this can happen on Lancer INTx where it takes
3168 * a while to de-assert INTx or in BE2 where occasionaly
3169 * an interrupt may be raised even when EQ is unarmed.
3170 * If NAPI is already scheduled, then counting & notifying
3171 * events will orphan them.
3173 if (napi_schedule_prep(&eqo
->napi
)) {
3174 num_evts
= events_get(eqo
);
3175 __napi_schedule(&eqo
->napi
);
3177 eqo
->spurious_intr
= 0;
3179 be_eq_notify(adapter
, eqo
->q
.id
, false, true, num_evts
, 0);
3181 /* Return IRQ_HANDLED only for the the first spurious intr
3182 * after a valid intr to stop the kernel from branding
3183 * this irq as a bad one!
3185 if (num_evts
|| eqo
->spurious_intr
++ == 0)
3191 static irqreturn_t
be_msix(int irq
, void *dev
)
3193 struct be_eq_obj
*eqo
= dev
;
3195 be_eq_notify(eqo
->adapter
, eqo
->q
.id
, false, true, 0, 0);
3196 napi_schedule(&eqo
->napi
);
3200 static inline bool do_gro(struct be_rx_compl_info
*rxcp
)
3202 return (rxcp
->tcpf
&& !rxcp
->err
&& rxcp
->l4_csum
) ? true : false;
3205 static int be_process_rx(struct be_rx_obj
*rxo
, struct napi_struct
*napi
,
3208 struct be_adapter
*adapter
= rxo
->adapter
;
3209 struct be_queue_info
*rx_cq
= &rxo
->cq
;
3210 struct be_rx_compl_info
*rxcp
;
3212 u32 frags_consumed
= 0;
3214 for (work_done
= 0; work_done
< budget
; work_done
++) {
3215 rxcp
= be_rx_compl_get(rxo
);
3219 /* Is it a flush compl that has no data */
3220 if (unlikely(rxcp
->num_rcvd
== 0))
3223 /* Discard compl with partial DMA Lancer B0 */
3224 if (unlikely(!rxcp
->pkt_size
)) {
3225 be_rx_compl_discard(rxo
, rxcp
);
3229 /* On BE drop pkts that arrive due to imperfect filtering in
3230 * promiscuous mode on some skews
3232 if (unlikely(rxcp
->port
!= adapter
->port_num
&&
3233 !lancer_chip(adapter
))) {
3234 be_rx_compl_discard(rxo
, rxcp
);
3239 be_rx_compl_process_gro(rxo
, napi
, rxcp
);
3241 be_rx_compl_process(rxo
, napi
, rxcp
);
3244 frags_consumed
+= rxcp
->num_rcvd
;
3245 be_rx_stats_update(rxo
, rxcp
);
3249 be_cq_notify(adapter
, rx_cq
->id
, true, work_done
);
3251 /* When an rx-obj gets into post_starved state, just
3252 * let be_worker do the posting.
3254 if (atomic_read(&rxo
->q
.used
) < RX_FRAGS_REFILL_WM
&&
3255 !rxo
->rx_post_starved
)
3256 be_post_rx_frags(rxo
, GFP_ATOMIC
,
3257 max_t(u32
, MAX_RX_POST
,
3265 static void be_process_tx(struct be_adapter
*adapter
, struct be_tx_obj
*txo
,
3268 int num_wrbs
= 0, work_done
= 0;
3269 struct be_tx_compl_info
*txcp
;
3271 while ((txcp
= be_tx_compl_get(adapter
, txo
))) {
3272 num_wrbs
+= be_tx_compl_process(adapter
, txo
, txcp
->end_index
);
3277 be_cq_notify(adapter
, txo
->cq
.id
, true, work_done
);
3278 atomic_sub(num_wrbs
, &txo
->q
.used
);
3280 /* As Tx wrbs have been freed up, wake up netdev queue
3281 * if it was stopped due to lack of tx wrbs. */
3282 if (__netif_subqueue_stopped(adapter
->netdev
, idx
) &&
3283 be_can_txq_wake(txo
)) {
3284 netif_wake_subqueue(adapter
->netdev
, idx
);
3287 u64_stats_update_begin(&tx_stats(txo
)->sync_compl
);
3288 tx_stats(txo
)->tx_compl
+= work_done
;
3289 u64_stats_update_end(&tx_stats(txo
)->sync_compl
);
3293 int be_poll(struct napi_struct
*napi
, int budget
)
3295 struct be_eq_obj
*eqo
= container_of(napi
, struct be_eq_obj
, napi
);
3296 struct be_adapter
*adapter
= eqo
->adapter
;
3297 int max_work
= 0, work
, i
, num_evts
;
3298 struct be_rx_obj
*rxo
;
3299 struct be_tx_obj
*txo
;
3302 num_evts
= events_get(eqo
);
3304 for_all_tx_queues_on_eq(adapter
, eqo
, txo
, i
)
3305 be_process_tx(adapter
, txo
, i
);
3307 /* This loop will iterate twice for EQ0 in which
3308 * completions of the last RXQ (default one) are also processed
3309 * For other EQs the loop iterates only once
3311 for_all_rx_queues_on_eq(adapter
, eqo
, rxo
, i
) {
3312 work
= be_process_rx(rxo
, napi
, budget
);
3313 max_work
= max(work
, max_work
);
3316 if (is_mcc_eqo(eqo
))
3317 be_process_mcc(adapter
);
3319 if (max_work
< budget
) {
3320 napi_complete_done(napi
, max_work
);
3322 /* Skyhawk EQ_DB has a provision to set the rearm to interrupt
3323 * delay via a delay multiplier encoding value
3325 if (skyhawk_chip(adapter
))
3326 mult_enc
= be_get_eq_delay_mult_enc(eqo
);
3328 be_eq_notify(adapter
, eqo
->q
.id
, true, false, num_evts
,
3331 /* As we'll continue in polling mode, count and clear events */
3332 be_eq_notify(adapter
, eqo
->q
.id
, false, false, num_evts
, 0);
3337 void be_detect_error(struct be_adapter
*adapter
)
3339 u32 ue_lo
= 0, ue_hi
= 0, ue_lo_mask
= 0, ue_hi_mask
= 0;
3340 u32 sliport_status
= 0, sliport_err1
= 0, sliport_err2
= 0;
3341 struct device
*dev
= &adapter
->pdev
->dev
;
3345 if (be_check_error(adapter
, BE_ERROR_HW
))
3348 if (lancer_chip(adapter
)) {
3349 sliport_status
= ioread32(adapter
->db
+ SLIPORT_STATUS_OFFSET
);
3350 if (sliport_status
& SLIPORT_STATUS_ERR_MASK
) {
3351 be_set_error(adapter
, BE_ERROR_UE
);
3352 sliport_err1
= ioread32(adapter
->db
+
3353 SLIPORT_ERROR1_OFFSET
);
3354 sliport_err2
= ioread32(adapter
->db
+
3355 SLIPORT_ERROR2_OFFSET
);
3356 /* Do not log error messages if its a FW reset */
3357 if (sliport_err1
== SLIPORT_ERROR_FW_RESET1
&&
3358 sliport_err2
== SLIPORT_ERROR_FW_RESET2
) {
3359 dev_info(dev
, "Reset is in progress\n");
3361 dev_err(dev
, "Error detected in the card\n");
3362 dev_err(dev
, "ERR: sliport status 0x%x\n",
3364 dev_err(dev
, "ERR: sliport error1 0x%x\n",
3366 dev_err(dev
, "ERR: sliport error2 0x%x\n",
3371 ue_lo
= ioread32(adapter
->pcicfg
+ PCICFG_UE_STATUS_LOW
);
3372 ue_hi
= ioread32(adapter
->pcicfg
+ PCICFG_UE_STATUS_HIGH
);
3373 ue_lo_mask
= ioread32(adapter
->pcicfg
+
3374 PCICFG_UE_STATUS_LOW_MASK
);
3375 ue_hi_mask
= ioread32(adapter
->pcicfg
+
3376 PCICFG_UE_STATUS_HI_MASK
);
3378 ue_lo
= (ue_lo
& ~ue_lo_mask
);
3379 ue_hi
= (ue_hi
& ~ue_hi_mask
);
3381 if (ue_lo
|| ue_hi
) {
3382 /* On certain platforms BE3 hardware can indicate
3383 * spurious UEs. In case of a UE in the chip,
3384 * the POST register correctly reports either a
3385 * FAT_LOG_START state (FW is currently dumping
3386 * FAT log data) or a ARMFW_UE state. Check for the
3387 * above states to ascertain if the UE is valid or not.
3389 if (BE3_chip(adapter
)) {
3390 val
= be_POST_stage_get(adapter
);
3391 if ((val
& POST_STAGE_FAT_LOG_START
)
3392 != POST_STAGE_FAT_LOG_START
&&
3393 (val
& POST_STAGE_ARMFW_UE
)
3394 != POST_STAGE_ARMFW_UE
&&
3395 (val
& POST_STAGE_RECOVERABLE_ERR
)
3396 != POST_STAGE_RECOVERABLE_ERR
)
3400 dev_err(dev
, "Error detected in the adapter");
3401 be_set_error(adapter
, BE_ERROR_UE
);
3403 for (i
= 0; ue_lo
; ue_lo
>>= 1, i
++) {
3405 dev_err(dev
, "UE: %s bit set\n",
3406 ue_status_low_desc
[i
]);
3408 for (i
= 0; ue_hi
; ue_hi
>>= 1, i
++) {
3410 dev_err(dev
, "UE: %s bit set\n",
3411 ue_status_hi_desc
[i
]);
3417 static void be_msix_disable(struct be_adapter
*adapter
)
3419 if (msix_enabled(adapter
)) {
3420 pci_disable_msix(adapter
->pdev
);
3421 adapter
->num_msix_vec
= 0;
3422 adapter
->num_msix_roce_vec
= 0;
3426 static int be_msix_enable(struct be_adapter
*adapter
)
3428 unsigned int i
, max_roce_eqs
;
3429 struct device
*dev
= &adapter
->pdev
->dev
;
3432 /* If RoCE is supported, program the max number of vectors that
3433 * could be used for NIC and RoCE, else, just program the number
3434 * we'll use initially.
3436 if (be_roce_supported(adapter
)) {
3438 be_max_func_eqs(adapter
) - be_max_nic_eqs(adapter
);
3439 max_roce_eqs
= min(max_roce_eqs
, num_online_cpus());
3440 num_vec
= be_max_any_irqs(adapter
) + max_roce_eqs
;
3442 num_vec
= max(adapter
->cfg_num_rx_irqs
,
3443 adapter
->cfg_num_tx_irqs
);
3446 for (i
= 0; i
< num_vec
; i
++)
3447 adapter
->msix_entries
[i
].entry
= i
;
3449 num_vec
= pci_enable_msix_range(adapter
->pdev
, adapter
->msix_entries
,
3450 MIN_MSIX_VECTORS
, num_vec
);
3454 if (be_roce_supported(adapter
) && num_vec
> MIN_MSIX_VECTORS
) {
3455 adapter
->num_msix_roce_vec
= num_vec
/ 2;
3456 dev_info(dev
, "enabled %d MSI-x vector(s) for RoCE\n",
3457 adapter
->num_msix_roce_vec
);
3460 adapter
->num_msix_vec
= num_vec
- adapter
->num_msix_roce_vec
;
3462 dev_info(dev
, "enabled %d MSI-x vector(s) for NIC\n",
3463 adapter
->num_msix_vec
);
3467 dev_warn(dev
, "MSIx enable failed\n");
3469 /* INTx is not supported in VFs, so fail probe if enable_msix fails */
3470 if (be_virtfn(adapter
))
3475 static inline int be_msix_vec_get(struct be_adapter
*adapter
,
3476 struct be_eq_obj
*eqo
)
3478 return adapter
->msix_entries
[eqo
->msix_idx
].vector
;
3481 static int be_msix_register(struct be_adapter
*adapter
)
3483 struct net_device
*netdev
= adapter
->netdev
;
3484 struct be_eq_obj
*eqo
;
3487 for_all_evt_queues(adapter
, eqo
, i
) {
3488 sprintf(eqo
->desc
, "%s-q%d", netdev
->name
, i
);
3489 vec
= be_msix_vec_get(adapter
, eqo
);
3490 status
= request_irq(vec
, be_msix
, 0, eqo
->desc
, eqo
);
3494 irq_set_affinity_hint(vec
, eqo
->affinity_mask
);
3499 for (i
--; i
>= 0; i
--) {
3500 eqo
= &adapter
->eq_obj
[i
];
3501 free_irq(be_msix_vec_get(adapter
, eqo
), eqo
);
3503 dev_warn(&adapter
->pdev
->dev
, "MSIX Request IRQ failed - err %d\n",
3505 be_msix_disable(adapter
);
3509 static int be_irq_register(struct be_adapter
*adapter
)
3511 struct net_device
*netdev
= adapter
->netdev
;
3514 if (msix_enabled(adapter
)) {
3515 status
= be_msix_register(adapter
);
3518 /* INTx is not supported for VF */
3519 if (be_virtfn(adapter
))
3523 /* INTx: only the first EQ is used */
3524 netdev
->irq
= adapter
->pdev
->irq
;
3525 status
= request_irq(netdev
->irq
, be_intx
, IRQF_SHARED
, netdev
->name
,
3526 &adapter
->eq_obj
[0]);
3528 dev_err(&adapter
->pdev
->dev
,
3529 "INTx request IRQ failed - err %d\n", status
);
3533 adapter
->isr_registered
= true;
3537 static void be_irq_unregister(struct be_adapter
*adapter
)
3539 struct net_device
*netdev
= adapter
->netdev
;
3540 struct be_eq_obj
*eqo
;
3543 if (!adapter
->isr_registered
)
3547 if (!msix_enabled(adapter
)) {
3548 free_irq(netdev
->irq
, &adapter
->eq_obj
[0]);
3553 for_all_evt_queues(adapter
, eqo
, i
) {
3554 vec
= be_msix_vec_get(adapter
, eqo
);
3555 irq_set_affinity_hint(vec
, NULL
);
3560 adapter
->isr_registered
= false;
3563 static void be_rx_qs_destroy(struct be_adapter
*adapter
)
3565 struct rss_info
*rss
= &adapter
->rss_info
;
3566 struct be_queue_info
*q
;
3567 struct be_rx_obj
*rxo
;
3570 for_all_rx_queues(adapter
, rxo
, i
) {
3573 /* If RXQs are destroyed while in an "out of buffer"
3574 * state, there is a possibility of an HW stall on
3575 * Lancer. So, post 64 buffers to each queue to relieve
3576 * the "out of buffer" condition.
3577 * Make sure there's space in the RXQ before posting.
3579 if (lancer_chip(adapter
)) {
3580 be_rx_cq_clean(rxo
);
3581 if (atomic_read(&q
->used
) == 0)
3582 be_post_rx_frags(rxo
, GFP_KERNEL
,
3586 be_cmd_rxq_destroy(adapter
, q
);
3587 be_rx_cq_clean(rxo
);
3590 be_queue_free(adapter
, q
);
3593 if (rss
->rss_flags
) {
3594 rss
->rss_flags
= RSS_ENABLE_NONE
;
3595 be_cmd_rss_config(adapter
, rss
->rsstable
, rss
->rss_flags
,
3596 128, rss
->rss_hkey
);
3600 static void be_disable_if_filters(struct be_adapter
*adapter
)
3602 /* Don't delete MAC on BE3 VFs without FILTMGMT privilege */
3603 if (!BEx_chip(adapter
) || !be_virtfn(adapter
) ||
3604 check_privilege(adapter
, BE_PRIV_FILTMGMT
)) {
3605 be_dev_mac_del(adapter
, adapter
->pmac_id
[0]);
3606 eth_zero_addr(adapter
->dev_mac
);
3609 be_clear_uc_list(adapter
);
3610 be_clear_mc_list(adapter
);
3612 /* The IFACE flags are enabled in the open path and cleared
3613 * in the close path. When a VF gets detached from the host and
3614 * assigned to a VM the following happens:
3615 * - VF's IFACE flags get cleared in the detach path
3616 * - IFACE create is issued by the VF in the attach path
3617 * Due to a bug in the BE3/Skyhawk-R FW
3618 * (Lancer FW doesn't have the bug), the IFACE capability flags
3619 * specified along with the IFACE create cmd issued by a VF are not
3620 * honoured by FW. As a consequence, if a *new* driver
3621 * (that enables/disables IFACE flags in open/close)
3622 * is loaded in the host and an *old* driver is * used by a VM/VF,
3623 * the IFACE gets created *without* the needed flags.
3624 * To avoid this, disable RX-filter flags only for Lancer.
3626 if (lancer_chip(adapter
)) {
3627 be_cmd_rx_filter(adapter
, BE_IF_ALL_FILT_FLAGS
, OFF
);
3628 adapter
->if_flags
&= ~BE_IF_ALL_FILT_FLAGS
;
3632 static int be_close(struct net_device
*netdev
)
3634 struct be_adapter
*adapter
= netdev_priv(netdev
);
3635 struct be_eq_obj
*eqo
;
3638 /* This protection is needed as be_close() may be called even when the
3639 * adapter is in cleared state (after eeh perm failure)
3641 if (!(adapter
->flags
& BE_FLAGS_SETUP_DONE
))
3644 /* Before attempting cleanup ensure all the pending cmds in the
3645 * config_wq have finished execution
3647 flush_workqueue(be_wq
);
3649 be_disable_if_filters(adapter
);
3651 if (adapter
->flags
& BE_FLAGS_NAPI_ENABLED
) {
3652 for_all_evt_queues(adapter
, eqo
, i
) {
3653 napi_disable(&eqo
->napi
);
3655 adapter
->flags
&= ~BE_FLAGS_NAPI_ENABLED
;
3658 be_async_mcc_disable(adapter
);
3660 /* Wait for all pending tx completions to arrive so that
3661 * all tx skbs are freed.
3663 netif_tx_disable(netdev
);
3664 be_tx_compl_clean(adapter
);
3666 be_rx_qs_destroy(adapter
);
3668 for_all_evt_queues(adapter
, eqo
, i
) {
3669 if (msix_enabled(adapter
))
3670 synchronize_irq(be_msix_vec_get(adapter
, eqo
));
3672 synchronize_irq(netdev
->irq
);
3676 be_irq_unregister(adapter
);
3681 static int be_rx_qs_create(struct be_adapter
*adapter
)
3683 struct rss_info
*rss
= &adapter
->rss_info
;
3684 u8 rss_key
[RSS_HASH_KEY_LEN
];
3685 struct be_rx_obj
*rxo
;
3688 for_all_rx_queues(adapter
, rxo
, i
) {
3689 rc
= be_queue_alloc(adapter
, &rxo
->q
, RX_Q_LEN
,
3690 sizeof(struct be_eth_rx_d
));
3695 if (adapter
->need_def_rxq
|| !adapter
->num_rss_qs
) {
3696 rxo
= default_rxo(adapter
);
3697 rc
= be_cmd_rxq_create(adapter
, &rxo
->q
, rxo
->cq
.id
,
3698 rx_frag_size
, adapter
->if_handle
,
3699 false, &rxo
->rss_id
);
3704 for_all_rss_queues(adapter
, rxo
, i
) {
3705 rc
= be_cmd_rxq_create(adapter
, &rxo
->q
, rxo
->cq
.id
,
3706 rx_frag_size
, adapter
->if_handle
,
3707 true, &rxo
->rss_id
);
3712 if (be_multi_rxq(adapter
)) {
3713 for (j
= 0; j
< RSS_INDIR_TABLE_LEN
; j
+= adapter
->num_rss_qs
) {
3714 for_all_rss_queues(adapter
, rxo
, i
) {
3715 if ((j
+ i
) >= RSS_INDIR_TABLE_LEN
)
3717 rss
->rsstable
[j
+ i
] = rxo
->rss_id
;
3718 rss
->rss_queue
[j
+ i
] = i
;
3721 rss
->rss_flags
= RSS_ENABLE_TCP_IPV4
| RSS_ENABLE_IPV4
|
3722 RSS_ENABLE_TCP_IPV6
| RSS_ENABLE_IPV6
;
3724 if (!BEx_chip(adapter
))
3725 rss
->rss_flags
|= RSS_ENABLE_UDP_IPV4
|
3726 RSS_ENABLE_UDP_IPV6
;
3728 netdev_rss_key_fill(rss_key
, RSS_HASH_KEY_LEN
);
3729 rc
= be_cmd_rss_config(adapter
, rss
->rsstable
, rss
->rss_flags
,
3730 RSS_INDIR_TABLE_LEN
, rss_key
);
3732 rss
->rss_flags
= RSS_ENABLE_NONE
;
3736 memcpy(rss
->rss_hkey
, rss_key
, RSS_HASH_KEY_LEN
);
3738 /* Disable RSS, if only default RX Q is created */
3739 rss
->rss_flags
= RSS_ENABLE_NONE
;
3743 /* Post 1 less than RXQ-len to avoid head being equal to tail,
3744 * which is a queue empty condition
3746 for_all_rx_queues(adapter
, rxo
, i
)
3747 be_post_rx_frags(rxo
, GFP_KERNEL
, RX_Q_LEN
- 1);
3752 static int be_enable_if_filters(struct be_adapter
*adapter
)
3756 status
= be_cmd_rx_filter(adapter
, BE_IF_FILT_FLAGS_BASIC
, ON
);
3760 /* Normally this condition usually true as the ->dev_mac is zeroed.
3761 * But on BE3 VFs the initial MAC is pre-programmed by PF and
3762 * subsequent be_dev_mac_add() can fail (after fresh boot)
3764 if (!ether_addr_equal(adapter
->dev_mac
, adapter
->netdev
->dev_addr
)) {
3765 int old_pmac_id
= -1;
3767 /* Remember old programmed MAC if any - can happen on BE3 VF */
3768 if (!is_zero_ether_addr(adapter
->dev_mac
))
3769 old_pmac_id
= adapter
->pmac_id
[0];
3771 status
= be_dev_mac_add(adapter
, adapter
->netdev
->dev_addr
);
3775 /* Delete the old programmed MAC as we successfully programmed
3778 if (old_pmac_id
>= 0 && old_pmac_id
!= adapter
->pmac_id
[0])
3779 be_dev_mac_del(adapter
, old_pmac_id
);
3781 ether_addr_copy(adapter
->dev_mac
, adapter
->netdev
->dev_addr
);
3784 if (adapter
->vlans_added
)
3785 be_vid_config(adapter
);
3787 __be_set_rx_mode(adapter
);
3792 static int be_open(struct net_device
*netdev
)
3794 struct be_adapter
*adapter
= netdev_priv(netdev
);
3795 struct be_eq_obj
*eqo
;
3796 struct be_rx_obj
*rxo
;
3797 struct be_tx_obj
*txo
;
3801 status
= be_rx_qs_create(adapter
);
3805 status
= be_enable_if_filters(adapter
);
3809 status
= be_irq_register(adapter
);
3813 for_all_rx_queues(adapter
, rxo
, i
)
3814 be_cq_notify(adapter
, rxo
->cq
.id
, true, 0);
3816 for_all_tx_queues(adapter
, txo
, i
)
3817 be_cq_notify(adapter
, txo
->cq
.id
, true, 0);
3819 be_async_mcc_enable(adapter
);
3821 for_all_evt_queues(adapter
, eqo
, i
) {
3822 napi_enable(&eqo
->napi
);
3823 be_eq_notify(adapter
, eqo
->q
.id
, true, true, 0, 0);
3825 adapter
->flags
|= BE_FLAGS_NAPI_ENABLED
;
3827 status
= be_cmd_link_status_query(adapter
, NULL
, &link_status
, 0);
3829 be_link_status_update(adapter
, link_status
);
3831 netif_tx_start_all_queues(netdev
);
3833 udp_tunnel_nic_reset_ntf(netdev
);
3837 be_close(adapter
->netdev
);
3841 static void be_vf_eth_addr_generate(struct be_adapter
*adapter
, u8
*mac
)
3845 addr
= jhash(adapter
->netdev
->dev_addr
, ETH_ALEN
, 0);
3847 mac
[5] = (u8
)(addr
& 0xFF);
3848 mac
[4] = (u8
)((addr
>> 8) & 0xFF);
3849 mac
[3] = (u8
)((addr
>> 16) & 0xFF);
3850 /* Use the OUI from the current MAC address */
3851 memcpy(mac
, adapter
->netdev
->dev_addr
, 3);
3855 * Generate a seed MAC address from the PF MAC Address using jhash.
3856 * MAC Address for VFs are assigned incrementally starting from the seed.
3857 * These addresses are programmed in the ASIC by the PF and the VF driver
3858 * queries for the MAC address during its probe.
3860 static int be_vf_eth_addr_config(struct be_adapter
*adapter
)
3865 struct be_vf_cfg
*vf_cfg
;
3867 be_vf_eth_addr_generate(adapter
, mac
);
3869 for_all_vfs(adapter
, vf_cfg
, vf
) {
3870 if (BEx_chip(adapter
))
3871 status
= be_cmd_pmac_add(adapter
, mac
,
3873 &vf_cfg
->pmac_id
, vf
+ 1);
3875 status
= be_cmd_set_mac(adapter
, mac
, vf_cfg
->if_handle
,
3879 dev_err(&adapter
->pdev
->dev
,
3880 "Mac address assignment failed for VF %d\n",
3883 memcpy(vf_cfg
->mac_addr
, mac
, ETH_ALEN
);
3890 static int be_vfs_mac_query(struct be_adapter
*adapter
)
3894 struct be_vf_cfg
*vf_cfg
;
3896 for_all_vfs(adapter
, vf_cfg
, vf
) {
3897 status
= be_cmd_get_active_mac(adapter
, vf_cfg
->pmac_id
,
3898 mac
, vf_cfg
->if_handle
,
3902 memcpy(vf_cfg
->mac_addr
, mac
, ETH_ALEN
);
3907 static void be_vf_clear(struct be_adapter
*adapter
)
3909 struct be_vf_cfg
*vf_cfg
;
3912 if (pci_vfs_assigned(adapter
->pdev
)) {
3913 dev_warn(&adapter
->pdev
->dev
,
3914 "VFs are assigned to VMs: not disabling VFs\n");
3918 pci_disable_sriov(adapter
->pdev
);
3920 for_all_vfs(adapter
, vf_cfg
, vf
) {
3921 if (BEx_chip(adapter
))
3922 be_cmd_pmac_del(adapter
, vf_cfg
->if_handle
,
3923 vf_cfg
->pmac_id
, vf
+ 1);
3925 be_cmd_set_mac(adapter
, NULL
, vf_cfg
->if_handle
,
3928 be_cmd_if_destroy(adapter
, vf_cfg
->if_handle
, vf
+ 1);
3931 if (BE3_chip(adapter
))
3932 be_cmd_set_hsw_config(adapter
, 0, 0,
3934 PORT_FWD_TYPE_PASSTHRU
, 0);
3936 kfree(adapter
->vf_cfg
);
3937 adapter
->num_vfs
= 0;
3938 adapter
->flags
&= ~BE_FLAGS_SRIOV_ENABLED
;
3941 static void be_clear_queues(struct be_adapter
*adapter
)
3943 be_mcc_queues_destroy(adapter
);
3944 be_rx_cqs_destroy(adapter
);
3945 be_tx_queues_destroy(adapter
);
3946 be_evt_queues_destroy(adapter
);
3949 static void be_cancel_worker(struct be_adapter
*adapter
)
3951 if (adapter
->flags
& BE_FLAGS_WORKER_SCHEDULED
) {
3952 cancel_delayed_work_sync(&adapter
->work
);
3953 adapter
->flags
&= ~BE_FLAGS_WORKER_SCHEDULED
;
3957 static void be_cancel_err_detection(struct be_adapter
*adapter
)
3959 struct be_error_recovery
*err_rec
= &adapter
->error_recovery
;
3961 if (!be_err_recovery_workq
)
3964 if (adapter
->flags
& BE_FLAGS_ERR_DETECTION_SCHEDULED
) {
3965 cancel_delayed_work_sync(&err_rec
->err_detection_work
);
3966 adapter
->flags
&= ~BE_FLAGS_ERR_DETECTION_SCHEDULED
;
3970 /* VxLAN offload Notes:
3972 * The stack defines tunnel offload flags (hw_enc_features) for IP and doesn't
3973 * distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload
3974 * is expected to work across all types of IP tunnels once exported. Skyhawk
3975 * supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN
3976 * offloads in hw_enc_features only when a VxLAN port is added. If other (non
3977 * VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for
3978 * those other tunnels are unexported on the fly through ndo_features_check().
3980 static int be_vxlan_set_port(struct net_device
*netdev
, unsigned int table
,
3981 unsigned int entry
, struct udp_tunnel_info
*ti
)
3983 struct be_adapter
*adapter
= netdev_priv(netdev
);
3984 struct device
*dev
= &adapter
->pdev
->dev
;
3987 status
= be_cmd_manage_iface(adapter
, adapter
->if_handle
,
3988 OP_CONVERT_NORMAL_TO_TUNNEL
);
3990 dev_warn(dev
, "Failed to convert normal interface to tunnel\n");
3993 adapter
->flags
|= BE_FLAGS_VXLAN_OFFLOADS
;
3995 status
= be_cmd_set_vxlan_port(adapter
, ti
->port
);
3997 dev_warn(dev
, "Failed to add VxLAN port\n");
4000 adapter
->vxlan_port
= ti
->port
;
4002 netdev
->hw_enc_features
|= NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
4003 NETIF_F_TSO
| NETIF_F_TSO6
|
4004 NETIF_F_GSO_UDP_TUNNEL
;
4006 dev_info(dev
, "Enabled VxLAN offloads for UDP port %d\n",
4007 be16_to_cpu(ti
->port
));
4011 static int be_vxlan_unset_port(struct net_device
*netdev
, unsigned int table
,
4012 unsigned int entry
, struct udp_tunnel_info
*ti
)
4014 struct be_adapter
*adapter
= netdev_priv(netdev
);
4016 if (adapter
->flags
& BE_FLAGS_VXLAN_OFFLOADS
)
4017 be_cmd_manage_iface(adapter
, adapter
->if_handle
,
4018 OP_CONVERT_TUNNEL_TO_NORMAL
);
4020 if (adapter
->vxlan_port
)
4021 be_cmd_set_vxlan_port(adapter
, 0);
4023 adapter
->flags
&= ~BE_FLAGS_VXLAN_OFFLOADS
;
4024 adapter
->vxlan_port
= 0;
4026 netdev
->hw_enc_features
= 0;
4030 static const struct udp_tunnel_nic_info be_udp_tunnels
= {
4031 .set_port
= be_vxlan_set_port
,
4032 .unset_port
= be_vxlan_unset_port
,
4033 .flags
= UDP_TUNNEL_NIC_INFO_MAY_SLEEP
|
4034 UDP_TUNNEL_NIC_INFO_OPEN_ONLY
,
4036 { .n_entries
= 1, .tunnel_types
= UDP_TUNNEL_TYPE_VXLAN
, },
4040 static void be_calculate_vf_res(struct be_adapter
*adapter
, u16 num_vfs
,
4041 struct be_resources
*vft_res
)
4043 struct be_resources res
= adapter
->pool_res
;
4044 u32 vf_if_cap_flags
= res
.vf_if_cap_flags
;
4045 struct be_resources res_mod
= {0};
4048 /* Distribute the queue resources among the PF and it's VFs */
4050 /* Divide the rx queues evenly among the VFs and the PF, capped
4051 * at VF-EQ-count. Any remainder queues belong to the PF.
4053 num_vf_qs
= min(SH_VF_MAX_NIC_EQS
,
4054 res
.max_rss_qs
/ (num_vfs
+ 1));
4056 /* Skyhawk-R chip supports only MAX_PORT_RSS_TABLES
4057 * RSS Tables per port. Provide RSS on VFs, only if number of
4058 * VFs requested is less than it's PF Pool's RSS Tables limit.
4060 if (num_vfs
>= be_max_pf_pool_rss_tables(adapter
))
4064 /* Resource with fields set to all '1's by GET_PROFILE_CONFIG cmd,
4065 * which are modifiable using SET_PROFILE_CONFIG cmd.
4067 be_cmd_get_profile_config(adapter
, &res_mod
, NULL
, ACTIVE_PROFILE_TYPE
,
4068 RESOURCE_MODIFIABLE
, 0);
4070 /* If RSS IFACE capability flags are modifiable for a VF, set the
4071 * capability flag as valid and set RSS and DEFQ_RSS IFACE flags if
4072 * more than 1 RSSQ is available for a VF.
4073 * Otherwise, provision only 1 queue pair for VF.
4075 if (res_mod
.vf_if_cap_flags
& BE_IF_FLAGS_RSS
) {
4076 vft_res
->flags
|= BIT(IF_CAPS_FLAGS_VALID_SHIFT
);
4077 if (num_vf_qs
> 1) {
4078 vf_if_cap_flags
|= BE_IF_FLAGS_RSS
;
4079 if (res
.if_cap_flags
& BE_IF_FLAGS_DEFQ_RSS
)
4080 vf_if_cap_flags
|= BE_IF_FLAGS_DEFQ_RSS
;
4082 vf_if_cap_flags
&= ~(BE_IF_FLAGS_RSS
|
4083 BE_IF_FLAGS_DEFQ_RSS
);
4089 if (res_mod
.vf_if_cap_flags
& BE_IF_FLAGS_VLAN_PROMISCUOUS
) {
4090 vft_res
->flags
|= BIT(IF_CAPS_FLAGS_VALID_SHIFT
);
4091 vf_if_cap_flags
&= ~BE_IF_FLAGS_VLAN_PROMISCUOUS
;
4094 vft_res
->vf_if_cap_flags
= vf_if_cap_flags
;
4095 vft_res
->max_rx_qs
= num_vf_qs
;
4096 vft_res
->max_rss_qs
= num_vf_qs
;
4097 vft_res
->max_tx_qs
= res
.max_tx_qs
/ (num_vfs
+ 1);
4098 vft_res
->max_cq_count
= res
.max_cq_count
/ (num_vfs
+ 1);
4100 /* Distribute unicast MACs, VLANs, IFACE count and MCCQ count equally
4101 * among the PF and it's VFs, if the fields are changeable
4103 if (res_mod
.max_uc_mac
== FIELD_MODIFIABLE
)
4104 vft_res
->max_uc_mac
= res
.max_uc_mac
/ (num_vfs
+ 1);
4106 if (res_mod
.max_vlans
== FIELD_MODIFIABLE
)
4107 vft_res
->max_vlans
= res
.max_vlans
/ (num_vfs
+ 1);
4109 if (res_mod
.max_iface_count
== FIELD_MODIFIABLE
)
4110 vft_res
->max_iface_count
= res
.max_iface_count
/ (num_vfs
+ 1);
4112 if (res_mod
.max_mcc_count
== FIELD_MODIFIABLE
)
4113 vft_res
->max_mcc_count
= res
.max_mcc_count
/ (num_vfs
+ 1);
4116 static void be_if_destroy(struct be_adapter
*adapter
)
4118 be_cmd_if_destroy(adapter
, adapter
->if_handle
, 0);
4120 kfree(adapter
->pmac_id
);
4121 adapter
->pmac_id
= NULL
;
4123 kfree(adapter
->mc_list
);
4124 adapter
->mc_list
= NULL
;
4126 kfree(adapter
->uc_list
);
4127 adapter
->uc_list
= NULL
;
4130 static int be_clear(struct be_adapter
*adapter
)
4132 struct pci_dev
*pdev
= adapter
->pdev
;
4133 struct be_resources vft_res
= {0};
4135 be_cancel_worker(adapter
);
4137 flush_workqueue(be_wq
);
4139 if (sriov_enabled(adapter
))
4140 be_vf_clear(adapter
);
4142 /* Re-configure FW to distribute resources evenly across max-supported
4143 * number of VFs, only when VFs are not already enabled.
4145 if (skyhawk_chip(adapter
) && be_physfn(adapter
) &&
4146 !pci_vfs_assigned(pdev
)) {
4147 be_calculate_vf_res(adapter
,
4148 pci_sriov_get_totalvfs(pdev
),
4150 be_cmd_set_sriov_config(adapter
, adapter
->pool_res
,
4151 pci_sriov_get_totalvfs(pdev
),
4155 be_vxlan_unset_port(adapter
->netdev
, 0, 0, NULL
);
4157 be_if_destroy(adapter
);
4159 be_clear_queues(adapter
);
4161 be_msix_disable(adapter
);
4162 adapter
->flags
&= ~BE_FLAGS_SETUP_DONE
;
4166 static int be_vfs_if_create(struct be_adapter
*adapter
)
4168 struct be_resources res
= {0};
4169 u32 cap_flags
, en_flags
, vf
;
4170 struct be_vf_cfg
*vf_cfg
;
4173 /* If a FW profile exists, then cap_flags are updated */
4174 cap_flags
= BE_VF_IF_EN_FLAGS
;
4176 for_all_vfs(adapter
, vf_cfg
, vf
) {
4177 if (!BE3_chip(adapter
)) {
4178 status
= be_cmd_get_profile_config(adapter
, &res
, NULL
,
4179 ACTIVE_PROFILE_TYPE
,
4183 cap_flags
= res
.if_cap_flags
;
4184 /* Prevent VFs from enabling VLAN promiscuous
4187 cap_flags
&= ~BE_IF_FLAGS_VLAN_PROMISCUOUS
;
4191 /* PF should enable IF flags during proxy if_create call */
4192 en_flags
= cap_flags
& BE_VF_IF_EN_FLAGS
;
4193 status
= be_cmd_if_create(adapter
, cap_flags
, en_flags
,
4194 &vf_cfg
->if_handle
, vf
+ 1);
4202 static int be_vf_setup_init(struct be_adapter
*adapter
)
4204 struct be_vf_cfg
*vf_cfg
;
4207 adapter
->vf_cfg
= kcalloc(adapter
->num_vfs
, sizeof(*vf_cfg
),
4209 if (!adapter
->vf_cfg
)
4212 for_all_vfs(adapter
, vf_cfg
, vf
) {
4213 vf_cfg
->if_handle
= -1;
4214 vf_cfg
->pmac_id
= -1;
4219 static int be_vf_setup(struct be_adapter
*adapter
)
4221 struct device
*dev
= &adapter
->pdev
->dev
;
4222 struct be_vf_cfg
*vf_cfg
;
4223 int status
, old_vfs
, vf
;
4226 old_vfs
= pci_num_vf(adapter
->pdev
);
4228 status
= be_vf_setup_init(adapter
);
4233 for_all_vfs(adapter
, vf_cfg
, vf
) {
4234 status
= be_cmd_get_if_id(adapter
, vf_cfg
, vf
);
4239 status
= be_vfs_mac_query(adapter
);
4243 status
= be_vfs_if_create(adapter
);
4247 status
= be_vf_eth_addr_config(adapter
);
4252 for_all_vfs(adapter
, vf_cfg
, vf
) {
4253 /* Allow VFs to programs MAC/VLAN filters */
4254 status
= be_cmd_get_fn_privileges(adapter
, &vf_cfg
->privileges
,
4256 if (!status
&& !(vf_cfg
->privileges
& BE_PRIV_FILTMGMT
)) {
4257 status
= be_cmd_set_fn_privileges(adapter
,
4258 vf_cfg
->privileges
|
4262 vf_cfg
->privileges
|= BE_PRIV_FILTMGMT
;
4263 dev_info(dev
, "VF%d has FILTMGMT privilege\n",
4268 /* Allow full available bandwidth */
4270 be_cmd_config_qos(adapter
, 0, 0, vf
+ 1);
4272 status
= be_cmd_get_hsw_config(adapter
, NULL
, vf
+ 1,
4273 vf_cfg
->if_handle
, NULL
,
4276 vf_cfg
->spoofchk
= spoofchk
;
4279 be_cmd_enable_vf(adapter
, vf
+ 1);
4280 be_cmd_set_logical_link_config(adapter
,
4281 IFLA_VF_LINK_STATE_AUTO
,
4287 status
= pci_enable_sriov(adapter
->pdev
, adapter
->num_vfs
);
4289 dev_err(dev
, "SRIOV enable failed\n");
4290 adapter
->num_vfs
= 0;
4295 if (BE3_chip(adapter
)) {
4296 /* On BE3, enable VEB only when SRIOV is enabled */
4297 status
= be_cmd_set_hsw_config(adapter
, 0, 0,
4299 PORT_FWD_TYPE_VEB
, 0);
4304 adapter
->flags
|= BE_FLAGS_SRIOV_ENABLED
;
4307 dev_err(dev
, "VF setup failed\n");
4308 be_vf_clear(adapter
);
4312 /* Converting function_mode bits on BE3 to SH mc_type enums */
4314 static u8
be_convert_mc_type(u32 function_mode
)
4316 if (function_mode
& VNIC_MODE
&& function_mode
& QNQ_MODE
)
4318 else if (function_mode
& QNQ_MODE
)
4320 else if (function_mode
& VNIC_MODE
)
4322 else if (function_mode
& UMC_ENABLED
)
4328 /* On BE2/BE3 FW does not suggest the supported limits */
4329 static void BEx_get_resources(struct be_adapter
*adapter
,
4330 struct be_resources
*res
)
4332 bool use_sriov
= adapter
->num_vfs
? 1 : 0;
4334 if (be_physfn(adapter
))
4335 res
->max_uc_mac
= BE_UC_PMAC_COUNT
;
4337 res
->max_uc_mac
= BE_VF_UC_PMAC_COUNT
;
4339 adapter
->mc_type
= be_convert_mc_type(adapter
->function_mode
);
4341 if (be_is_mc(adapter
)) {
4342 /* Assuming that there are 4 channels per port,
4343 * when multi-channel is enabled
4345 if (be_is_qnq_mode(adapter
))
4346 res
->max_vlans
= BE_NUM_VLANS_SUPPORTED
/8;
4348 /* In a non-qnq multichannel mode, the pvid
4349 * takes up one vlan entry
4351 res
->max_vlans
= (BE_NUM_VLANS_SUPPORTED
/ 4) - 1;
4353 res
->max_vlans
= BE_NUM_VLANS_SUPPORTED
;
4356 res
->max_mcast_mac
= BE_MAX_MC
;
4358 /* 1) For BE3 1Gb ports, FW does not support multiple TXQs
4359 * 2) Create multiple TX rings on a BE3-R multi-channel interface
4360 * *only* if it is RSS-capable.
4362 if (BE2_chip(adapter
) || use_sriov
|| (adapter
->port_num
> 1) ||
4363 be_virtfn(adapter
) ||
4364 (be_is_mc(adapter
) &&
4365 !(adapter
->function_caps
& BE_FUNCTION_CAPS_RSS
))) {
4367 } else if (adapter
->function_caps
& BE_FUNCTION_CAPS_SUPER_NIC
) {
4368 struct be_resources super_nic_res
= {0};
4370 /* On a SuperNIC profile, the driver needs to use the
4371 * GET_PROFILE_CONFIG cmd to query the per-function TXQ limits
4373 be_cmd_get_profile_config(adapter
, &super_nic_res
, NULL
,
4374 ACTIVE_PROFILE_TYPE
, RESOURCE_LIMITS
,
4376 /* Some old versions of BE3 FW don't report max_tx_qs value */
4377 res
->max_tx_qs
= super_nic_res
.max_tx_qs
? : BE3_MAX_TX_QS
;
4379 res
->max_tx_qs
= BE3_MAX_TX_QS
;
4382 if ((adapter
->function_caps
& BE_FUNCTION_CAPS_RSS
) &&
4383 !use_sriov
&& be_physfn(adapter
))
4384 res
->max_rss_qs
= (adapter
->be3_native
) ?
4385 BE3_MAX_RSS_QS
: BE2_MAX_RSS_QS
;
4386 res
->max_rx_qs
= res
->max_rss_qs
+ 1;
4388 if (be_physfn(adapter
))
4389 res
->max_evt_qs
= (be_max_vfs(adapter
) > 0) ?
4390 BE3_SRIOV_MAX_EVT_QS
: BE3_MAX_EVT_QS
;
4392 res
->max_evt_qs
= 1;
4394 res
->if_cap_flags
= BE_IF_CAP_FLAGS_WANT
;
4395 res
->if_cap_flags
&= ~BE_IF_FLAGS_DEFQ_RSS
;
4396 if (!(adapter
->function_caps
& BE_FUNCTION_CAPS_RSS
))
4397 res
->if_cap_flags
&= ~BE_IF_FLAGS_RSS
;
4400 static void be_setup_init(struct be_adapter
*adapter
)
4402 adapter
->vlan_prio_bmap
= 0xff;
4403 adapter
->phy
.link_speed
= -1;
4404 adapter
->if_handle
= -1;
4405 adapter
->be3_native
= false;
4406 adapter
->if_flags
= 0;
4407 adapter
->phy_state
= BE_UNKNOWN_PHY_STATE
;
4408 if (be_physfn(adapter
))
4409 adapter
->cmd_privileges
= MAX_PRIVILEGES
;
4411 adapter
->cmd_privileges
= MIN_PRIVILEGES
;
4414 /* HW supports only MAX_PORT_RSS_TABLES RSS Policy Tables per port.
4415 * However, this HW limitation is not exposed to the host via any SLI cmd.
4416 * As a result, in the case of SRIOV and in particular multi-partition configs
4417 * the driver needs to calcuate a proportional share of RSS Tables per PF-pool
4418 * for distribution between the VFs. This self-imposed limit will determine the
4419 * no: of VFs for which RSS can be enabled.
4421 static void be_calculate_pf_pool_rss_tables(struct be_adapter
*adapter
)
4423 struct be_port_resources port_res
= {0};
4424 u8 rss_tables_on_port
;
4425 u16 max_vfs
= be_max_vfs(adapter
);
4427 be_cmd_get_profile_config(adapter
, NULL
, &port_res
, SAVED_PROFILE_TYPE
,
4428 RESOURCE_LIMITS
, 0);
4430 rss_tables_on_port
= MAX_PORT_RSS_TABLES
- port_res
.nic_pfs
;
4432 /* Each PF Pool's RSS Tables limit =
4433 * PF's Max VFs / Total_Max_VFs on Port * RSS Tables on Port
4435 adapter
->pool_res
.max_rss_tables
=
4436 max_vfs
* rss_tables_on_port
/ port_res
.max_vfs
;
4439 static int be_get_sriov_config(struct be_adapter
*adapter
)
4441 struct be_resources res
= {0};
4442 int max_vfs
, old_vfs
;
4444 be_cmd_get_profile_config(adapter
, &res
, NULL
, ACTIVE_PROFILE_TYPE
,
4445 RESOURCE_LIMITS
, 0);
4447 /* Some old versions of BE3 FW don't report max_vfs value */
4448 if (BE3_chip(adapter
) && !res
.max_vfs
) {
4449 max_vfs
= pci_sriov_get_totalvfs(adapter
->pdev
);
4450 res
.max_vfs
= max_vfs
> 0 ? min(MAX_VFS
, max_vfs
) : 0;
4453 adapter
->pool_res
= res
;
4455 /* If during previous unload of the driver, the VFs were not disabled,
4456 * then we cannot rely on the PF POOL limits for the TotalVFs value.
4457 * Instead use the TotalVFs value stored in the pci-dev struct.
4459 old_vfs
= pci_num_vf(adapter
->pdev
);
4461 dev_info(&adapter
->pdev
->dev
, "%d VFs are already enabled\n",
4464 adapter
->pool_res
.max_vfs
=
4465 pci_sriov_get_totalvfs(adapter
->pdev
);
4466 adapter
->num_vfs
= old_vfs
;
4469 if (skyhawk_chip(adapter
) && be_max_vfs(adapter
) && !old_vfs
) {
4470 be_calculate_pf_pool_rss_tables(adapter
);
4471 dev_info(&adapter
->pdev
->dev
,
4472 "RSS can be enabled for all VFs if num_vfs <= %d\n",
4473 be_max_pf_pool_rss_tables(adapter
));
4478 static void be_alloc_sriov_res(struct be_adapter
*adapter
)
4480 int old_vfs
= pci_num_vf(adapter
->pdev
);
4481 struct be_resources vft_res
= {0};
4484 be_get_sriov_config(adapter
);
4487 pci_sriov_set_totalvfs(adapter
->pdev
, be_max_vfs(adapter
));
4489 /* When the HW is in SRIOV capable configuration, the PF-pool
4490 * resources are given to PF during driver load, if there are no
4491 * old VFs. This facility is not available in BE3 FW.
4492 * Also, this is done by FW in Lancer chip.
4494 if (skyhawk_chip(adapter
) && be_max_vfs(adapter
) && !old_vfs
) {
4495 be_calculate_vf_res(adapter
, 0, &vft_res
);
4496 status
= be_cmd_set_sriov_config(adapter
, adapter
->pool_res
, 0,
4499 dev_err(&adapter
->pdev
->dev
,
4500 "Failed to optimize SRIOV resources\n");
4504 static int be_get_resources(struct be_adapter
*adapter
)
4506 struct device
*dev
= &adapter
->pdev
->dev
;
4507 struct be_resources res
= {0};
4510 /* For Lancer, SH etc read per-function resource limits from FW.
4511 * GET_FUNC_CONFIG returns per function guaranteed limits.
4512 * GET_PROFILE_CONFIG returns PCI-E related limits PF-pool limits
4514 if (BEx_chip(adapter
)) {
4515 BEx_get_resources(adapter
, &res
);
4517 status
= be_cmd_get_func_config(adapter
, &res
);
4521 /* If a deafault RXQ must be created, we'll use up one RSSQ*/
4522 if (res
.max_rss_qs
&& res
.max_rss_qs
== res
.max_rx_qs
&&
4523 !(res
.if_cap_flags
& BE_IF_FLAGS_DEFQ_RSS
))
4524 res
.max_rss_qs
-= 1;
4527 /* If RoCE is supported stash away half the EQs for RoCE */
4528 res
.max_nic_evt_qs
= be_roce_supported(adapter
) ?
4529 res
.max_evt_qs
/ 2 : res
.max_evt_qs
;
4532 /* If FW supports RSS default queue, then skip creating non-RSS
4533 * queue for non-IP traffic.
4535 adapter
->need_def_rxq
= (be_if_cap_flags(adapter
) &
4536 BE_IF_FLAGS_DEFQ_RSS
) ? 0 : 1;
4538 dev_info(dev
, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n",
4539 be_max_txqs(adapter
), be_max_rxqs(adapter
),
4540 be_max_rss(adapter
), be_max_nic_eqs(adapter
),
4541 be_max_vfs(adapter
));
4542 dev_info(dev
, "Max: uc-macs %d, mc-macs %d, vlans %d\n",
4543 be_max_uc(adapter
), be_max_mc(adapter
),
4544 be_max_vlans(adapter
));
4546 /* Ensure RX and TX queues are created in pairs at init time */
4547 adapter
->cfg_num_rx_irqs
=
4548 min_t(u16
, netif_get_num_default_rss_queues(),
4549 be_max_qp_irqs(adapter
));
4550 adapter
->cfg_num_tx_irqs
= adapter
->cfg_num_rx_irqs
;
4554 static int be_get_config(struct be_adapter
*adapter
)
4559 status
= be_cmd_get_cntl_attributes(adapter
);
4563 status
= be_cmd_query_fw_cfg(adapter
);
4567 if (!lancer_chip(adapter
) && be_physfn(adapter
))
4568 be_cmd_get_fat_dump_len(adapter
, &adapter
->fat_dump_len
);
4570 if (BEx_chip(adapter
)) {
4571 level
= be_cmd_get_fw_log_level(adapter
);
4572 adapter
->msg_enable
=
4573 level
<= FW_LOG_LEVEL_DEFAULT
? NETIF_MSG_HW
: 0;
4576 be_cmd_get_acpi_wol_cap(adapter
);
4577 pci_enable_wake(adapter
->pdev
, PCI_D3hot
, adapter
->wol_en
);
4578 pci_enable_wake(adapter
->pdev
, PCI_D3cold
, adapter
->wol_en
);
4580 be_cmd_query_port_name(adapter
);
4582 if (be_physfn(adapter
)) {
4583 status
= be_cmd_get_active_profile(adapter
, &profile_id
);
4585 dev_info(&adapter
->pdev
->dev
,
4586 "Using profile 0x%x\n", profile_id
);
4592 static int be_mac_setup(struct be_adapter
*adapter
)
4597 if (is_zero_ether_addr(adapter
->netdev
->dev_addr
)) {
4598 status
= be_cmd_get_perm_mac(adapter
, mac
);
4602 memcpy(adapter
->netdev
->dev_addr
, mac
, ETH_ALEN
);
4603 memcpy(adapter
->netdev
->perm_addr
, mac
, ETH_ALEN
);
4605 /* Initial MAC for BE3 VFs is already programmed by PF */
4606 if (BEx_chip(adapter
) && be_virtfn(adapter
))
4607 memcpy(adapter
->dev_mac
, mac
, ETH_ALEN
);
4613 static void be_schedule_worker(struct be_adapter
*adapter
)
4615 queue_delayed_work(be_wq
, &adapter
->work
, msecs_to_jiffies(1000));
4616 adapter
->flags
|= BE_FLAGS_WORKER_SCHEDULED
;
4619 static void be_destroy_err_recovery_workq(void)
4621 if (!be_err_recovery_workq
)
4624 flush_workqueue(be_err_recovery_workq
);
4625 destroy_workqueue(be_err_recovery_workq
);
4626 be_err_recovery_workq
= NULL
;
4629 static void be_schedule_err_detection(struct be_adapter
*adapter
, u32 delay
)
4631 struct be_error_recovery
*err_rec
= &adapter
->error_recovery
;
4633 if (!be_err_recovery_workq
)
4636 queue_delayed_work(be_err_recovery_workq
, &err_rec
->err_detection_work
,
4637 msecs_to_jiffies(delay
));
4638 adapter
->flags
|= BE_FLAGS_ERR_DETECTION_SCHEDULED
;
4641 static int be_setup_queues(struct be_adapter
*adapter
)
4643 struct net_device
*netdev
= adapter
->netdev
;
4646 status
= be_evt_queues_create(adapter
);
4650 status
= be_tx_qs_create(adapter
);
4654 status
= be_rx_cqs_create(adapter
);
4658 status
= be_mcc_queues_create(adapter
);
4662 status
= netif_set_real_num_rx_queues(netdev
, adapter
->num_rx_qs
);
4666 status
= netif_set_real_num_tx_queues(netdev
, adapter
->num_tx_qs
);
4672 dev_err(&adapter
->pdev
->dev
, "queue_setup failed\n");
4676 static int be_if_create(struct be_adapter
*adapter
)
4678 u32 en_flags
= BE_IF_FLAGS_RSS
| BE_IF_FLAGS_DEFQ_RSS
;
4679 u32 cap_flags
= be_if_cap_flags(adapter
);
4681 /* alloc required memory for other filtering fields */
4682 adapter
->pmac_id
= kcalloc(be_max_uc(adapter
),
4683 sizeof(*adapter
->pmac_id
), GFP_KERNEL
);
4684 if (!adapter
->pmac_id
)
4687 adapter
->mc_list
= kcalloc(be_max_mc(adapter
),
4688 sizeof(*adapter
->mc_list
), GFP_KERNEL
);
4689 if (!adapter
->mc_list
)
4692 adapter
->uc_list
= kcalloc(be_max_uc(adapter
),
4693 sizeof(*adapter
->uc_list
), GFP_KERNEL
);
4694 if (!adapter
->uc_list
)
4697 if (adapter
->cfg_num_rx_irqs
== 1)
4698 cap_flags
&= ~(BE_IF_FLAGS_DEFQ_RSS
| BE_IF_FLAGS_RSS
);
4700 en_flags
&= cap_flags
;
4701 /* will enable all the needed filter flags in be_open() */
4702 return be_cmd_if_create(adapter
, be_if_cap_flags(adapter
), en_flags
,
4703 &adapter
->if_handle
, 0);
4706 int be_update_queues(struct be_adapter
*adapter
)
4708 struct net_device
*netdev
= adapter
->netdev
;
4711 if (netif_running(netdev
)) {
4712 /* be_tx_timeout() must not run concurrently with this
4713 * function, synchronize with an already-running dev_watchdog
4715 netif_tx_lock_bh(netdev
);
4716 /* device cannot transmit now, avoid dev_watchdog timeouts */
4717 netif_carrier_off(netdev
);
4718 netif_tx_unlock_bh(netdev
);
4723 be_cancel_worker(adapter
);
4725 /* If any vectors have been shared with RoCE we cannot re-program
4728 if (!adapter
->num_msix_roce_vec
)
4729 be_msix_disable(adapter
);
4731 be_clear_queues(adapter
);
4732 status
= be_cmd_if_destroy(adapter
, adapter
->if_handle
, 0);
4736 if (!msix_enabled(adapter
)) {
4737 status
= be_msix_enable(adapter
);
4742 status
= be_if_create(adapter
);
4746 status
= be_setup_queues(adapter
);
4750 be_schedule_worker(adapter
);
4752 /* The IF was destroyed and re-created. We need to clear
4753 * all promiscuous flags valid for the destroyed IF.
4754 * Without this promisc mode is not restored during
4755 * be_open() because the driver thinks that it is
4756 * already enabled in HW.
4758 adapter
->if_flags
&= ~BE_IF_FLAGS_ALL_PROMISCUOUS
;
4760 if (netif_running(netdev
))
4761 status
= be_open(netdev
);
4766 static inline int fw_major_num(const char *fw_ver
)
4768 int fw_major
= 0, i
;
4770 i
= sscanf(fw_ver
, "%d.", &fw_major
);
4777 /* If it is error recovery, FLR the PF
4778 * Else if any VFs are already enabled don't FLR the PF
4780 static bool be_reset_required(struct be_adapter
*adapter
)
4782 if (be_error_recovering(adapter
))
4785 return pci_num_vf(adapter
->pdev
) == 0;
4788 /* Wait for the FW to be ready and perform the required initialization */
4789 static int be_func_init(struct be_adapter
*adapter
)
4793 status
= be_fw_wait_ready(adapter
);
4797 /* FW is now ready; clear errors to allow cmds/doorbell */
4798 be_clear_error(adapter
, BE_CLEAR_ALL
);
4800 if (be_reset_required(adapter
)) {
4801 status
= be_cmd_reset_function(adapter
);
4805 /* Wait for interrupts to quiesce after an FLR */
4809 /* Tell FW we're ready to fire cmds */
4810 status
= be_cmd_fw_init(adapter
);
4814 /* Allow interrupts for other ULPs running on NIC function */
4815 be_intr_set(adapter
, true);
4820 static int be_setup(struct be_adapter
*adapter
)
4822 struct device
*dev
= &adapter
->pdev
->dev
;
4825 status
= be_func_init(adapter
);
4829 be_setup_init(adapter
);
4831 if (!lancer_chip(adapter
))
4832 be_cmd_req_native_mode(adapter
);
4834 /* invoke this cmd first to get pf_num and vf_num which are needed
4835 * for issuing profile related cmds
4837 if (!BEx_chip(adapter
)) {
4838 status
= be_cmd_get_func_config(adapter
, NULL
);
4843 status
= be_get_config(adapter
);
4847 if (!BE2_chip(adapter
) && be_physfn(adapter
))
4848 be_alloc_sriov_res(adapter
);
4850 status
= be_get_resources(adapter
);
4854 status
= be_msix_enable(adapter
);
4858 /* will enable all the needed filter flags in be_open() */
4859 status
= be_if_create(adapter
);
4863 /* Updating real_num_tx/rx_queues() requires rtnl_lock() */
4865 status
= be_setup_queues(adapter
);
4870 be_cmd_get_fn_privileges(adapter
, &adapter
->cmd_privileges
, 0);
4872 status
= be_mac_setup(adapter
);
4876 be_cmd_get_fw_ver(adapter
);
4877 dev_info(dev
, "FW version is %s\n", adapter
->fw_ver
);
4879 if (BE2_chip(adapter
) && fw_major_num(adapter
->fw_ver
) < 4) {
4880 dev_err(dev
, "Firmware on card is old(%s), IRQs may not work",
4882 dev_err(dev
, "Please upgrade firmware to version >= 4.0\n");
4885 status
= be_cmd_set_flow_control(adapter
, adapter
->tx_fc
,
4888 be_cmd_get_flow_control(adapter
, &adapter
->tx_fc
,
4891 dev_info(&adapter
->pdev
->dev
, "HW Flow control - TX:%d RX:%d\n",
4892 adapter
->tx_fc
, adapter
->rx_fc
);
4894 if (be_physfn(adapter
))
4895 be_cmd_set_logical_link_config(adapter
,
4896 IFLA_VF_LINK_STATE_AUTO
, 0);
4898 /* BE3 EVB echoes broadcast/multicast packets back to PF's vport
4899 * confusing a linux bridge or OVS that it might be connected to.
4900 * Set the EVB to PASSTHRU mode which effectively disables the EVB
4901 * when SRIOV is not enabled.
4903 if (BE3_chip(adapter
))
4904 be_cmd_set_hsw_config(adapter
, 0, 0, adapter
->if_handle
,
4905 PORT_FWD_TYPE_PASSTHRU
, 0);
4907 if (adapter
->num_vfs
)
4908 be_vf_setup(adapter
);
4910 status
= be_cmd_get_phy_info(adapter
);
4911 if (!status
&& be_pause_supported(adapter
))
4912 adapter
->phy
.fc_autoneg
= 1;
4914 if (be_physfn(adapter
) && !lancer_chip(adapter
))
4915 be_cmd_set_features(adapter
);
4917 be_schedule_worker(adapter
);
4918 adapter
->flags
|= BE_FLAGS_SETUP_DONE
;
4925 #ifdef CONFIG_NET_POLL_CONTROLLER
4926 static void be_netpoll(struct net_device
*netdev
)
4928 struct be_adapter
*adapter
= netdev_priv(netdev
);
4929 struct be_eq_obj
*eqo
;
4932 for_all_evt_queues(adapter
, eqo
, i
) {
4933 be_eq_notify(eqo
->adapter
, eqo
->q
.id
, false, true, 0, 0);
4934 napi_schedule(&eqo
->napi
);
4939 int be_load_fw(struct be_adapter
*adapter
, u8
*fw_file
)
4941 const struct firmware
*fw
;
4944 if (!netif_running(adapter
->netdev
)) {
4945 dev_err(&adapter
->pdev
->dev
,
4946 "Firmware load not allowed (interface is down)\n");
4950 status
= request_firmware(&fw
, fw_file
, &adapter
->pdev
->dev
);
4954 dev_info(&adapter
->pdev
->dev
, "Flashing firmware file %s\n", fw_file
);
4956 if (lancer_chip(adapter
))
4957 status
= lancer_fw_download(adapter
, fw
);
4959 status
= be_fw_download(adapter
, fw
);
4962 be_cmd_get_fw_ver(adapter
);
4965 release_firmware(fw
);
4969 static int be_ndo_bridge_setlink(struct net_device
*dev
, struct nlmsghdr
*nlh
,
4970 u16 flags
, struct netlink_ext_ack
*extack
)
4972 struct be_adapter
*adapter
= netdev_priv(dev
);
4973 struct nlattr
*attr
, *br_spec
;
4978 if (!sriov_enabled(adapter
))
4981 br_spec
= nlmsg_find_attr(nlh
, sizeof(struct ifinfomsg
), IFLA_AF_SPEC
);
4985 nla_for_each_nested(attr
, br_spec
, rem
) {
4986 if (nla_type(attr
) != IFLA_BRIDGE_MODE
)
4989 if (nla_len(attr
) < sizeof(mode
))
4992 mode
= nla_get_u16(attr
);
4993 if (BE3_chip(adapter
) && mode
== BRIDGE_MODE_VEPA
)
4996 if (mode
!= BRIDGE_MODE_VEPA
&& mode
!= BRIDGE_MODE_VEB
)
4999 status
= be_cmd_set_hsw_config(adapter
, 0, 0,
5001 mode
== BRIDGE_MODE_VEPA
?
5002 PORT_FWD_TYPE_VEPA
:
5003 PORT_FWD_TYPE_VEB
, 0);
5007 dev_info(&adapter
->pdev
->dev
, "enabled switch mode: %s\n",
5008 mode
== BRIDGE_MODE_VEPA
? "VEPA" : "VEB");
5013 dev_err(&adapter
->pdev
->dev
, "Failed to set switch mode %s\n",
5014 mode
== BRIDGE_MODE_VEPA
? "VEPA" : "VEB");
5019 static int be_ndo_bridge_getlink(struct sk_buff
*skb
, u32 pid
, u32 seq
,
5020 struct net_device
*dev
, u32 filter_mask
,
5023 struct be_adapter
*adapter
= netdev_priv(dev
);
5027 /* BE and Lancer chips support VEB mode only */
5028 if (BEx_chip(adapter
) || lancer_chip(adapter
)) {
5029 /* VEB is disabled in non-SR-IOV profiles on BE3/Lancer */
5030 if (!pci_sriov_get_totalvfs(adapter
->pdev
))
5032 hsw_mode
= PORT_FWD_TYPE_VEB
;
5034 status
= be_cmd_get_hsw_config(adapter
, NULL
, 0,
5035 adapter
->if_handle
, &hsw_mode
,
5040 if (hsw_mode
== PORT_FWD_TYPE_PASSTHRU
)
5044 return ndo_dflt_bridge_getlink(skb
, pid
, seq
, dev
,
5045 hsw_mode
== PORT_FWD_TYPE_VEPA
?
5046 BRIDGE_MODE_VEPA
: BRIDGE_MODE_VEB
,
5047 0, 0, nlflags
, filter_mask
, NULL
);
5050 static struct be_cmd_work
*be_alloc_work(struct be_adapter
*adapter
,
5051 void (*func
)(struct work_struct
*))
5053 struct be_cmd_work
*work
;
5055 work
= kzalloc(sizeof(*work
), GFP_ATOMIC
);
5057 dev_err(&adapter
->pdev
->dev
,
5058 "be_work memory allocation failed\n");
5062 INIT_WORK(&work
->work
, func
);
5063 work
->adapter
= adapter
;
5067 static netdev_features_t
be_features_check(struct sk_buff
*skb
,
5068 struct net_device
*dev
,
5069 netdev_features_t features
)
5071 struct be_adapter
*adapter
= netdev_priv(dev
);
5074 if (skb_is_gso(skb
)) {
5075 /* IPv6 TSO requests with extension hdrs are a problem
5076 * to Lancer and BE3 HW. Disable TSO6 feature.
5078 if (!skyhawk_chip(adapter
) && is_ipv6_ext_hdr(skb
))
5079 features
&= ~NETIF_F_TSO6
;
5081 /* Lancer cannot handle the packet with MSS less than 256.
5082 * Also it can't handle a TSO packet with a single segment
5083 * Disable the GSO support in such cases
5085 if (lancer_chip(adapter
) &&
5086 (skb_shinfo(skb
)->gso_size
< 256 ||
5087 skb_shinfo(skb
)->gso_segs
== 1))
5088 features
&= ~NETIF_F_GSO_MASK
;
5091 /* The code below restricts offload features for some tunneled and
5093 * Offload features for normal (non tunnel) packets are unchanged.
5095 features
= vlan_features_check(skb
, features
);
5096 if (!skb
->encapsulation
||
5097 !(adapter
->flags
& BE_FLAGS_VXLAN_OFFLOADS
))
5100 /* It's an encapsulated packet and VxLAN offloads are enabled. We
5101 * should disable tunnel offload features if it's not a VxLAN packet,
5102 * as tunnel offloads have been enabled only for VxLAN. This is done to
5103 * allow other tunneled traffic like GRE work fine while VxLAN
5104 * offloads are configured in Skyhawk-R.
5106 switch (vlan_get_protocol(skb
)) {
5107 case htons(ETH_P_IP
):
5108 l4_hdr
= ip_hdr(skb
)->protocol
;
5110 case htons(ETH_P_IPV6
):
5111 l4_hdr
= ipv6_hdr(skb
)->nexthdr
;
5117 if (l4_hdr
!= IPPROTO_UDP
||
5118 skb
->inner_protocol_type
!= ENCAP_TYPE_ETHER
||
5119 skb
->inner_protocol
!= htons(ETH_P_TEB
) ||
5120 skb_inner_mac_header(skb
) - skb_transport_header(skb
) !=
5121 sizeof(struct udphdr
) + sizeof(struct vxlanhdr
) ||
5122 !adapter
->vxlan_port
||
5123 udp_hdr(skb
)->dest
!= adapter
->vxlan_port
)
5124 return features
& ~(NETIF_F_CSUM_MASK
| NETIF_F_GSO_MASK
);
5129 static int be_get_phys_port_id(struct net_device
*dev
,
5130 struct netdev_phys_item_id
*ppid
)
5132 int i
, id_len
= CNTL_SERIAL_NUM_WORDS
* CNTL_SERIAL_NUM_WORD_SZ
+ 1;
5133 struct be_adapter
*adapter
= netdev_priv(dev
);
5136 if (MAX_PHYS_ITEM_ID_LEN
< id_len
)
5139 ppid
->id
[0] = adapter
->hba_port_num
+ 1;
5141 for (i
= CNTL_SERIAL_NUM_WORDS
- 1; i
>= 0;
5142 i
--, id
+= CNTL_SERIAL_NUM_WORD_SZ
)
5143 memcpy(id
, &adapter
->serial_num
[i
], CNTL_SERIAL_NUM_WORD_SZ
);
5145 ppid
->id_len
= id_len
;
5150 static void be_set_rx_mode(struct net_device
*dev
)
5152 struct be_adapter
*adapter
= netdev_priv(dev
);
5153 struct be_cmd_work
*work
;
5155 work
= be_alloc_work(adapter
, be_work_set_rx_mode
);
5157 queue_work(be_wq
, &work
->work
);
5160 static const struct net_device_ops be_netdev_ops
= {
5161 .ndo_open
= be_open
,
5162 .ndo_stop
= be_close
,
5163 .ndo_start_xmit
= be_xmit
,
5164 .ndo_set_rx_mode
= be_set_rx_mode
,
5165 .ndo_set_mac_address
= be_mac_addr_set
,
5166 .ndo_get_stats64
= be_get_stats64
,
5167 .ndo_validate_addr
= eth_validate_addr
,
5168 .ndo_vlan_rx_add_vid
= be_vlan_add_vid
,
5169 .ndo_vlan_rx_kill_vid
= be_vlan_rem_vid
,
5170 .ndo_set_vf_mac
= be_set_vf_mac
,
5171 .ndo_set_vf_vlan
= be_set_vf_vlan
,
5172 .ndo_set_vf_rate
= be_set_vf_tx_rate
,
5173 .ndo_get_vf_config
= be_get_vf_config
,
5174 .ndo_set_vf_link_state
= be_set_vf_link_state
,
5175 .ndo_set_vf_spoofchk
= be_set_vf_spoofchk
,
5176 .ndo_tx_timeout
= be_tx_timeout
,
5177 #ifdef CONFIG_NET_POLL_CONTROLLER
5178 .ndo_poll_controller
= be_netpoll
,
5180 .ndo_bridge_setlink
= be_ndo_bridge_setlink
,
5181 .ndo_bridge_getlink
= be_ndo_bridge_getlink
,
5182 .ndo_udp_tunnel_add
= udp_tunnel_nic_add_port
,
5183 .ndo_udp_tunnel_del
= udp_tunnel_nic_del_port
,
5184 .ndo_features_check
= be_features_check
,
5185 .ndo_get_phys_port_id
= be_get_phys_port_id
,
5188 static void be_netdev_init(struct net_device
*netdev
)
5190 struct be_adapter
*adapter
= netdev_priv(netdev
);
5192 netdev
->hw_features
|= NETIF_F_SG
| NETIF_F_TSO
| NETIF_F_TSO6
|
5193 NETIF_F_GSO_UDP_TUNNEL
|
5194 NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
| NETIF_F_RXCSUM
|
5195 NETIF_F_HW_VLAN_CTAG_TX
;
5196 if ((be_if_cap_flags(adapter
) & BE_IF_FLAGS_RSS
))
5197 netdev
->hw_features
|= NETIF_F_RXHASH
;
5199 netdev
->features
|= netdev
->hw_features
|
5200 NETIF_F_HW_VLAN_CTAG_RX
| NETIF_F_HW_VLAN_CTAG_FILTER
;
5202 netdev
->vlan_features
|= NETIF_F_SG
| NETIF_F_TSO
| NETIF_F_TSO6
|
5203 NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
;
5205 netdev
->priv_flags
|= IFF_UNICAST_FLT
;
5207 netdev
->flags
|= IFF_MULTICAST
;
5209 netif_set_gso_max_size(netdev
, BE_MAX_GSO_SIZE
- ETH_HLEN
);
5211 netdev
->netdev_ops
= &be_netdev_ops
;
5213 netdev
->ethtool_ops
= &be_ethtool_ops
;
5215 if (!lancer_chip(adapter
) && !BEx_chip(adapter
) && !be_is_mc(adapter
))
5216 netdev
->udp_tunnel_nic_info
= &be_udp_tunnels
;
5218 /* MTU range: 256 - 9000 */
5219 netdev
->min_mtu
= BE_MIN_MTU
;
5220 netdev
->max_mtu
= BE_MAX_MTU
;
5223 static void be_cleanup(struct be_adapter
*adapter
)
5225 struct net_device
*netdev
= adapter
->netdev
;
5228 netif_device_detach(netdev
);
5229 if (netif_running(netdev
))
5236 static int be_resume(struct be_adapter
*adapter
)
5238 struct net_device
*netdev
= adapter
->netdev
;
5241 status
= be_setup(adapter
);
5246 if (netif_running(netdev
))
5247 status
= be_open(netdev
);
5253 netif_device_attach(netdev
);
5258 static void be_soft_reset(struct be_adapter
*adapter
)
5262 dev_info(&adapter
->pdev
->dev
, "Initiating chip soft reset\n");
5263 val
= ioread32(adapter
->pcicfg
+ SLIPORT_SOFTRESET_OFFSET
);
5264 val
|= SLIPORT_SOFTRESET_SR_MASK
;
5265 iowrite32(val
, adapter
->pcicfg
+ SLIPORT_SOFTRESET_OFFSET
);
5268 static bool be_err_is_recoverable(struct be_adapter
*adapter
)
5270 struct be_error_recovery
*err_rec
= &adapter
->error_recovery
;
5271 unsigned long initial_idle_time
=
5272 msecs_to_jiffies(ERR_RECOVERY_IDLE_TIME
);
5273 unsigned long recovery_interval
=
5274 msecs_to_jiffies(ERR_RECOVERY_INTERVAL
);
5278 val
= be_POST_stage_get(adapter
);
5279 if ((val
& POST_STAGE_RECOVERABLE_ERR
) != POST_STAGE_RECOVERABLE_ERR
)
5281 ue_err_code
= val
& POST_ERR_RECOVERY_CODE_MASK
;
5282 if (ue_err_code
== 0)
5285 dev_err(&adapter
->pdev
->dev
, "Recoverable HW error code: 0x%x\n",
5288 if (time_before_eq(jiffies
- err_rec
->probe_time
, initial_idle_time
)) {
5289 dev_err(&adapter
->pdev
->dev
,
5290 "Cannot recover within %lu sec from driver load\n",
5291 jiffies_to_msecs(initial_idle_time
) / MSEC_PER_SEC
);
5295 if (err_rec
->last_recovery_time
&& time_before_eq(
5296 jiffies
- err_rec
->last_recovery_time
, recovery_interval
)) {
5297 dev_err(&adapter
->pdev
->dev
,
5298 "Cannot recover within %lu sec from last recovery\n",
5299 jiffies_to_msecs(recovery_interval
) / MSEC_PER_SEC
);
5303 if (ue_err_code
== err_rec
->last_err_code
) {
5304 dev_err(&adapter
->pdev
->dev
,
5305 "Cannot recover from a consecutive TPE error\n");
5309 err_rec
->last_recovery_time
= jiffies
;
5310 err_rec
->last_err_code
= ue_err_code
;
5314 static int be_tpe_recover(struct be_adapter
*adapter
)
5316 struct be_error_recovery
*err_rec
= &adapter
->error_recovery
;
5317 int status
= -EAGAIN
;
5320 switch (err_rec
->recovery_state
) {
5321 case ERR_RECOVERY_ST_NONE
:
5322 err_rec
->recovery_state
= ERR_RECOVERY_ST_DETECT
;
5323 err_rec
->resched_delay
= ERR_RECOVERY_UE_DETECT_DURATION
;
5326 case ERR_RECOVERY_ST_DETECT
:
5327 val
= be_POST_stage_get(adapter
);
5328 if ((val
& POST_STAGE_RECOVERABLE_ERR
) !=
5329 POST_STAGE_RECOVERABLE_ERR
) {
5330 dev_err(&adapter
->pdev
->dev
,
5331 "Unrecoverable HW error detected: 0x%x\n", val
);
5333 err_rec
->resched_delay
= 0;
5337 dev_err(&adapter
->pdev
->dev
, "Recoverable HW error detected\n");
5339 /* Only PF0 initiates Chip Soft Reset. But PF0 must wait UE2SR
5340 * milliseconds before it checks for final error status in
5341 * SLIPORT_SEMAPHORE to determine if recovery criteria is met.
5342 * If it does, then PF0 initiates a Soft Reset.
5344 if (adapter
->pf_num
== 0) {
5345 err_rec
->recovery_state
= ERR_RECOVERY_ST_RESET
;
5346 err_rec
->resched_delay
= err_rec
->ue_to_reset_time
-
5347 ERR_RECOVERY_UE_DETECT_DURATION
;
5351 err_rec
->recovery_state
= ERR_RECOVERY_ST_PRE_POLL
;
5352 err_rec
->resched_delay
= err_rec
->ue_to_poll_time
-
5353 ERR_RECOVERY_UE_DETECT_DURATION
;
5356 case ERR_RECOVERY_ST_RESET
:
5357 if (!be_err_is_recoverable(adapter
)) {
5358 dev_err(&adapter
->pdev
->dev
,
5359 "Failed to meet recovery criteria\n");
5361 err_rec
->resched_delay
= 0;
5364 be_soft_reset(adapter
);
5365 err_rec
->recovery_state
= ERR_RECOVERY_ST_PRE_POLL
;
5366 err_rec
->resched_delay
= err_rec
->ue_to_poll_time
-
5367 err_rec
->ue_to_reset_time
;
5370 case ERR_RECOVERY_ST_PRE_POLL
:
5371 err_rec
->recovery_state
= ERR_RECOVERY_ST_REINIT
;
5372 err_rec
->resched_delay
= 0;
5373 status
= 0; /* done */
5378 err_rec
->resched_delay
= 0;
5385 static int be_err_recover(struct be_adapter
*adapter
)
5389 if (!lancer_chip(adapter
)) {
5390 if (!adapter
->error_recovery
.recovery_supported
||
5391 adapter
->priv_flags
& BE_DISABLE_TPE_RECOVERY
)
5393 status
= be_tpe_recover(adapter
);
5398 /* Wait for adapter to reach quiescent state before
5401 status
= be_fw_wait_ready(adapter
);
5405 adapter
->flags
|= BE_FLAGS_TRY_RECOVERY
;
5407 be_cleanup(adapter
);
5409 status
= be_resume(adapter
);
5413 adapter
->flags
&= ~BE_FLAGS_TRY_RECOVERY
;
5419 static void be_err_detection_task(struct work_struct
*work
)
5421 struct be_error_recovery
*err_rec
=
5422 container_of(work
, struct be_error_recovery
,
5423 err_detection_work
.work
);
5424 struct be_adapter
*adapter
=
5425 container_of(err_rec
, struct be_adapter
,
5427 u32 resched_delay
= ERR_RECOVERY_DETECTION_DELAY
;
5428 struct device
*dev
= &adapter
->pdev
->dev
;
5429 int recovery_status
;
5431 be_detect_error(adapter
);
5432 if (!be_check_error(adapter
, BE_ERROR_HW
))
5433 goto reschedule_task
;
5435 recovery_status
= be_err_recover(adapter
);
5436 if (!recovery_status
) {
5437 err_rec
->recovery_retries
= 0;
5438 err_rec
->recovery_state
= ERR_RECOVERY_ST_NONE
;
5439 dev_info(dev
, "Adapter recovery successful\n");
5440 goto reschedule_task
;
5441 } else if (!lancer_chip(adapter
) && err_rec
->resched_delay
) {
5442 /* BEx/SH recovery state machine */
5443 if (adapter
->pf_num
== 0 &&
5444 err_rec
->recovery_state
> ERR_RECOVERY_ST_DETECT
)
5445 dev_err(&adapter
->pdev
->dev
,
5446 "Adapter recovery in progress\n");
5447 resched_delay
= err_rec
->resched_delay
;
5448 goto reschedule_task
;
5449 } else if (lancer_chip(adapter
) && be_virtfn(adapter
)) {
5450 /* For VFs, check if PF have allocated resources
5453 dev_err(dev
, "Re-trying adapter recovery\n");
5454 goto reschedule_task
;
5455 } else if (lancer_chip(adapter
) && err_rec
->recovery_retries
++ <
5456 ERR_RECOVERY_MAX_RETRY_COUNT
) {
5457 /* In case of another error during recovery, it takes 30 sec
5458 * for adapter to come out of error. Retry error recovery after
5459 * this time interval.
5461 dev_err(&adapter
->pdev
->dev
, "Re-trying adapter recovery\n");
5462 resched_delay
= ERR_RECOVERY_RETRY_DELAY
;
5463 goto reschedule_task
;
5465 dev_err(dev
, "Adapter recovery failed\n");
5466 dev_err(dev
, "Please reboot server to recover\n");
5472 be_schedule_err_detection(adapter
, resched_delay
);
5475 static void be_log_sfp_info(struct be_adapter
*adapter
)
5479 status
= be_cmd_query_sfp_info(adapter
);
5481 dev_err(&adapter
->pdev
->dev
,
5482 "Port %c: %s Vendor: %s part no: %s",
5484 be_misconfig_evt_port_state
[adapter
->phy_state
],
5485 adapter
->phy
.vendor_name
,
5486 adapter
->phy
.vendor_pn
);
5488 adapter
->flags
&= ~BE_FLAGS_PHY_MISCONFIGURED
;
5491 static void be_worker(struct work_struct
*work
)
5493 struct be_adapter
*adapter
=
5494 container_of(work
, struct be_adapter
, work
.work
);
5495 struct be_rx_obj
*rxo
;
5498 if (be_physfn(adapter
) &&
5499 MODULO(adapter
->work_counter
, adapter
->be_get_temp_freq
) == 0)
5500 be_cmd_get_die_temperature(adapter
);
5502 /* when interrupts are not yet enabled, just reap any pending
5505 if (!netif_running(adapter
->netdev
)) {
5506 be_process_mcc(adapter
);
5510 if (!adapter
->stats_cmd_sent
) {
5511 if (lancer_chip(adapter
))
5512 lancer_cmd_get_pport_stats(adapter
,
5513 &adapter
->stats_cmd
);
5515 be_cmd_get_stats(adapter
, &adapter
->stats_cmd
);
5518 for_all_rx_queues(adapter
, rxo
, i
) {
5519 /* Replenish RX-queues starved due to memory
5520 * allocation failures.
5522 if (rxo
->rx_post_starved
)
5523 be_post_rx_frags(rxo
, GFP_KERNEL
, MAX_RX_POST
);
5526 /* EQ-delay update for Skyhawk is done while notifying EQ */
5527 if (!skyhawk_chip(adapter
))
5528 be_eqd_update(adapter
, false);
5530 if (adapter
->flags
& BE_FLAGS_PHY_MISCONFIGURED
)
5531 be_log_sfp_info(adapter
);
5534 adapter
->work_counter
++;
5535 queue_delayed_work(be_wq
, &adapter
->work
, msecs_to_jiffies(1000));
5538 static void be_unmap_pci_bars(struct be_adapter
*adapter
)
5541 pci_iounmap(adapter
->pdev
, adapter
->csr
);
5543 pci_iounmap(adapter
->pdev
, adapter
->db
);
5544 if (adapter
->pcicfg
&& adapter
->pcicfg_mapped
)
5545 pci_iounmap(adapter
->pdev
, adapter
->pcicfg
);
5548 static int db_bar(struct be_adapter
*adapter
)
5550 if (lancer_chip(adapter
) || be_virtfn(adapter
))
5556 static int be_roce_map_pci_bars(struct be_adapter
*adapter
)
5558 if (skyhawk_chip(adapter
)) {
5559 adapter
->roce_db
.size
= 4096;
5560 adapter
->roce_db
.io_addr
= pci_resource_start(adapter
->pdev
,
5562 adapter
->roce_db
.total_size
= pci_resource_len(adapter
->pdev
,
5568 static int be_map_pci_bars(struct be_adapter
*adapter
)
5570 struct pci_dev
*pdev
= adapter
->pdev
;
5574 pci_read_config_dword(adapter
->pdev
, SLI_INTF_REG_OFFSET
, &sli_intf
);
5575 adapter
->sli_family
= (sli_intf
& SLI_INTF_FAMILY_MASK
) >>
5576 SLI_INTF_FAMILY_SHIFT
;
5577 adapter
->virtfn
= (sli_intf
& SLI_INTF_FT_MASK
) ? 1 : 0;
5579 if (BEx_chip(adapter
) && be_physfn(adapter
)) {
5580 adapter
->csr
= pci_iomap(pdev
, 2, 0);
5585 addr
= pci_iomap(pdev
, db_bar(adapter
), 0);
5590 if (skyhawk_chip(adapter
) || BEx_chip(adapter
)) {
5591 if (be_physfn(adapter
)) {
5592 /* PCICFG is the 2nd BAR in BE2 */
5593 addr
= pci_iomap(pdev
, BE2_chip(adapter
) ? 1 : 0, 0);
5596 adapter
->pcicfg
= addr
;
5597 adapter
->pcicfg_mapped
= true;
5599 adapter
->pcicfg
= adapter
->db
+ SRIOV_VF_PCICFG_OFFSET
;
5600 adapter
->pcicfg_mapped
= false;
5604 be_roce_map_pci_bars(adapter
);
5608 dev_err(&pdev
->dev
, "Error in mapping PCI BARs\n");
5609 be_unmap_pci_bars(adapter
);
5613 static void be_drv_cleanup(struct be_adapter
*adapter
)
5615 struct be_dma_mem
*mem
= &adapter
->mbox_mem_alloced
;
5616 struct device
*dev
= &adapter
->pdev
->dev
;
5619 dma_free_coherent(dev
, mem
->size
, mem
->va
, mem
->dma
);
5621 mem
= &adapter
->rx_filter
;
5623 dma_free_coherent(dev
, mem
->size
, mem
->va
, mem
->dma
);
5625 mem
= &adapter
->stats_cmd
;
5627 dma_free_coherent(dev
, mem
->size
, mem
->va
, mem
->dma
);
5630 /* Allocate and initialize various fields in be_adapter struct */
5631 static int be_drv_init(struct be_adapter
*adapter
)
5633 struct be_dma_mem
*mbox_mem_alloc
= &adapter
->mbox_mem_alloced
;
5634 struct be_dma_mem
*mbox_mem_align
= &adapter
->mbox_mem
;
5635 struct be_dma_mem
*rx_filter
= &adapter
->rx_filter
;
5636 struct be_dma_mem
*stats_cmd
= &adapter
->stats_cmd
;
5637 struct device
*dev
= &adapter
->pdev
->dev
;
5640 mbox_mem_alloc
->size
= sizeof(struct be_mcc_mailbox
) + 16;
5641 mbox_mem_alloc
->va
= dma_alloc_coherent(dev
, mbox_mem_alloc
->size
,
5642 &mbox_mem_alloc
->dma
,
5644 if (!mbox_mem_alloc
->va
)
5647 mbox_mem_align
->size
= sizeof(struct be_mcc_mailbox
);
5648 mbox_mem_align
->va
= PTR_ALIGN(mbox_mem_alloc
->va
, 16);
5649 mbox_mem_align
->dma
= PTR_ALIGN(mbox_mem_alloc
->dma
, 16);
5651 rx_filter
->size
= sizeof(struct be_cmd_req_rx_filter
);
5652 rx_filter
->va
= dma_alloc_coherent(dev
, rx_filter
->size
,
5653 &rx_filter
->dma
, GFP_KERNEL
);
5654 if (!rx_filter
->va
) {
5659 if (lancer_chip(adapter
))
5660 stats_cmd
->size
= sizeof(struct lancer_cmd_req_pport_stats
);
5661 else if (BE2_chip(adapter
))
5662 stats_cmd
->size
= sizeof(struct be_cmd_req_get_stats_v0
);
5663 else if (BE3_chip(adapter
))
5664 stats_cmd
->size
= sizeof(struct be_cmd_req_get_stats_v1
);
5666 stats_cmd
->size
= sizeof(struct be_cmd_req_get_stats_v2
);
5667 stats_cmd
->va
= dma_alloc_coherent(dev
, stats_cmd
->size
,
5668 &stats_cmd
->dma
, GFP_KERNEL
);
5669 if (!stats_cmd
->va
) {
5671 goto free_rx_filter
;
5674 mutex_init(&adapter
->mbox_lock
);
5675 mutex_init(&adapter
->mcc_lock
);
5676 mutex_init(&adapter
->rx_filter_lock
);
5677 spin_lock_init(&adapter
->mcc_cq_lock
);
5678 init_completion(&adapter
->et_cmd_compl
);
5680 pci_save_state(adapter
->pdev
);
5682 INIT_DELAYED_WORK(&adapter
->work
, be_worker
);
5684 adapter
->error_recovery
.recovery_state
= ERR_RECOVERY_ST_NONE
;
5685 adapter
->error_recovery
.resched_delay
= 0;
5686 INIT_DELAYED_WORK(&adapter
->error_recovery
.err_detection_work
,
5687 be_err_detection_task
);
5689 adapter
->rx_fc
= true;
5690 adapter
->tx_fc
= true;
5692 /* Must be a power of 2 or else MODULO will BUG_ON */
5693 adapter
->be_get_temp_freq
= 64;
5698 dma_free_coherent(dev
, rx_filter
->size
, rx_filter
->va
, rx_filter
->dma
);
5700 dma_free_coherent(dev
, mbox_mem_alloc
->size
, mbox_mem_alloc
->va
,
5701 mbox_mem_alloc
->dma
);
5705 static void be_remove(struct pci_dev
*pdev
)
5707 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5712 be_roce_dev_remove(adapter
);
5713 be_intr_set(adapter
, false);
5715 be_cancel_err_detection(adapter
);
5717 unregister_netdev(adapter
->netdev
);
5721 if (!pci_vfs_assigned(adapter
->pdev
))
5722 be_cmd_reset_function(adapter
);
5724 /* tell fw we're done with firing cmds */
5725 be_cmd_fw_clean(adapter
);
5727 be_unmap_pci_bars(adapter
);
5728 be_drv_cleanup(adapter
);
5730 pci_disable_pcie_error_reporting(pdev
);
5732 pci_release_regions(pdev
);
5733 pci_disable_device(pdev
);
5735 free_netdev(adapter
->netdev
);
5738 static ssize_t
be_hwmon_show_temp(struct device
*dev
,
5739 struct device_attribute
*dev_attr
,
5742 struct be_adapter
*adapter
= dev_get_drvdata(dev
);
5744 /* Unit: millidegree Celsius */
5745 if (adapter
->hwmon_info
.be_on_die_temp
== BE_INVALID_DIE_TEMP
)
5748 return sprintf(buf
, "%u\n",
5749 adapter
->hwmon_info
.be_on_die_temp
* 1000);
5752 static SENSOR_DEVICE_ATTR(temp1_input
, 0444,
5753 be_hwmon_show_temp
, NULL
, 1);
5755 static struct attribute
*be_hwmon_attrs
[] = {
5756 &sensor_dev_attr_temp1_input
.dev_attr
.attr
,
5760 ATTRIBUTE_GROUPS(be_hwmon
);
5762 static char *mc_name(struct be_adapter
*adapter
)
5764 char *str
= ""; /* default */
5766 switch (adapter
->mc_type
) {
5792 static inline char *func_name(struct be_adapter
*adapter
)
5794 return be_physfn(adapter
) ? "PF" : "VF";
5797 static inline char *nic_name(struct pci_dev
*pdev
)
5799 switch (pdev
->device
) {
5806 return OC_NAME_LANCER
;
5817 static int be_probe(struct pci_dev
*pdev
, const struct pci_device_id
*pdev_id
)
5819 struct be_adapter
*adapter
;
5820 struct net_device
*netdev
;
5823 status
= pci_enable_device(pdev
);
5827 status
= pci_request_regions(pdev
, DRV_NAME
);
5830 pci_set_master(pdev
);
5832 netdev
= alloc_etherdev_mqs(sizeof(*adapter
), MAX_TX_QS
, MAX_RX_QS
);
5837 adapter
= netdev_priv(netdev
);
5838 adapter
->pdev
= pdev
;
5839 pci_set_drvdata(pdev
, adapter
);
5840 adapter
->netdev
= netdev
;
5841 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
5843 status
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(64));
5845 netdev
->features
|= NETIF_F_HIGHDMA
;
5847 status
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(32));
5849 dev_err(&pdev
->dev
, "Could not set PCI DMA Mask\n");
5854 status
= pci_enable_pcie_error_reporting(pdev
);
5856 dev_info(&pdev
->dev
, "PCIe error reporting enabled\n");
5858 status
= be_map_pci_bars(adapter
);
5862 status
= be_drv_init(adapter
);
5866 status
= be_setup(adapter
);
5870 be_netdev_init(netdev
);
5871 status
= register_netdev(netdev
);
5875 be_roce_dev_add(adapter
);
5877 be_schedule_err_detection(adapter
, ERR_DETECTION_DELAY
);
5878 adapter
->error_recovery
.probe_time
= jiffies
;
5880 /* On Die temperature not supported for VF. */
5881 if (be_physfn(adapter
) && IS_ENABLED(CONFIG_BE2NET_HWMON
)) {
5882 adapter
->hwmon_info
.hwmon_dev
=
5883 devm_hwmon_device_register_with_groups(&pdev
->dev
,
5887 adapter
->hwmon_info
.be_on_die_temp
= BE_INVALID_DIE_TEMP
;
5890 dev_info(&pdev
->dev
, "%s: %s %s port %c\n", nic_name(pdev
),
5891 func_name(adapter
), mc_name(adapter
), adapter
->port_name
);
5898 be_drv_cleanup(adapter
);
5900 be_unmap_pci_bars(adapter
);
5902 free_netdev(netdev
);
5904 pci_release_regions(pdev
);
5906 pci_disable_device(pdev
);
5908 dev_err(&pdev
->dev
, "%s initialization failed\n", nic_name(pdev
));
5912 static int __maybe_unused
be_suspend(struct device
*dev_d
)
5914 struct be_adapter
*adapter
= dev_get_drvdata(dev_d
);
5916 be_intr_set(adapter
, false);
5917 be_cancel_err_detection(adapter
);
5919 be_cleanup(adapter
);
5924 static int __maybe_unused
be_pci_resume(struct device
*dev_d
)
5926 struct be_adapter
*adapter
= dev_get_drvdata(dev_d
);
5929 status
= be_resume(adapter
);
5933 be_schedule_err_detection(adapter
, ERR_DETECTION_DELAY
);
5939 * An FLR will stop BE from DMAing any data.
5941 static void be_shutdown(struct pci_dev
*pdev
)
5943 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5948 be_roce_dev_shutdown(adapter
);
5949 cancel_delayed_work_sync(&adapter
->work
);
5950 be_cancel_err_detection(adapter
);
5952 netif_device_detach(adapter
->netdev
);
5954 be_cmd_reset_function(adapter
);
5956 pci_disable_device(pdev
);
5959 static pci_ers_result_t
be_eeh_err_detected(struct pci_dev
*pdev
,
5960 pci_channel_state_t state
)
5962 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5964 dev_err(&adapter
->pdev
->dev
, "EEH error detected\n");
5966 be_roce_dev_remove(adapter
);
5968 if (!be_check_error(adapter
, BE_ERROR_EEH
)) {
5969 be_set_error(adapter
, BE_ERROR_EEH
);
5971 be_cancel_err_detection(adapter
);
5973 be_cleanup(adapter
);
5976 if (state
== pci_channel_io_perm_failure
)
5977 return PCI_ERS_RESULT_DISCONNECT
;
5979 pci_disable_device(pdev
);
5981 /* The error could cause the FW to trigger a flash debug dump.
5982 * Resetting the card while flash dump is in progress
5983 * can cause it not to recover; wait for it to finish.
5984 * Wait only for first function as it is needed only once per
5987 if (pdev
->devfn
== 0)
5990 return PCI_ERS_RESULT_NEED_RESET
;
5993 static pci_ers_result_t
be_eeh_reset(struct pci_dev
*pdev
)
5995 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5998 dev_info(&adapter
->pdev
->dev
, "EEH reset\n");
6000 status
= pci_enable_device(pdev
);
6002 return PCI_ERS_RESULT_DISCONNECT
;
6004 pci_set_master(pdev
);
6005 pci_restore_state(pdev
);
6007 /* Check if card is ok and fw is ready */
6008 dev_info(&adapter
->pdev
->dev
,
6009 "Waiting for FW to be ready after EEH reset\n");
6010 status
= be_fw_wait_ready(adapter
);
6012 return PCI_ERS_RESULT_DISCONNECT
;
6014 be_clear_error(adapter
, BE_CLEAR_ALL
);
6015 return PCI_ERS_RESULT_RECOVERED
;
6018 static void be_eeh_resume(struct pci_dev
*pdev
)
6021 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
6023 dev_info(&adapter
->pdev
->dev
, "EEH resume\n");
6025 pci_save_state(pdev
);
6027 status
= be_resume(adapter
);
6031 be_roce_dev_add(adapter
);
6033 be_schedule_err_detection(adapter
, ERR_DETECTION_DELAY
);
6036 dev_err(&adapter
->pdev
->dev
, "EEH resume failed\n");
6039 static int be_pci_sriov_configure(struct pci_dev
*pdev
, int num_vfs
)
6041 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
6042 struct be_resources vft_res
= {0};
6046 be_vf_clear(adapter
);
6048 adapter
->num_vfs
= num_vfs
;
6050 if (adapter
->num_vfs
== 0 && pci_vfs_assigned(pdev
)) {
6051 dev_warn(&pdev
->dev
,
6052 "Cannot disable VFs while they are assigned\n");
6056 /* When the HW is in SRIOV capable configuration, the PF-pool resources
6057 * are equally distributed across the max-number of VFs. The user may
6058 * request only a subset of the max-vfs to be enabled.
6059 * Based on num_vfs, redistribute the resources across num_vfs so that
6060 * each VF will have access to more number of resources.
6061 * This facility is not available in BE3 FW.
6062 * Also, this is done by FW in Lancer chip.
6064 if (skyhawk_chip(adapter
) && !pci_num_vf(pdev
)) {
6065 be_calculate_vf_res(adapter
, adapter
->num_vfs
,
6067 status
= be_cmd_set_sriov_config(adapter
, adapter
->pool_res
,
6068 adapter
->num_vfs
, &vft_res
);
6071 "Failed to optimize SR-IOV resources\n");
6074 status
= be_get_resources(adapter
);
6076 return be_cmd_status(status
);
6078 /* Updating real_num_tx/rx_queues() requires rtnl_lock() */
6080 status
= be_update_queues(adapter
);
6083 return be_cmd_status(status
);
6085 if (adapter
->num_vfs
)
6086 status
= be_vf_setup(adapter
);
6089 return adapter
->num_vfs
;
6094 static const struct pci_error_handlers be_eeh_handlers
= {
6095 .error_detected
= be_eeh_err_detected
,
6096 .slot_reset
= be_eeh_reset
,
6097 .resume
= be_eeh_resume
,
6100 static SIMPLE_DEV_PM_OPS(be_pci_pm_ops
, be_suspend
, be_pci_resume
);
6102 static struct pci_driver be_driver
= {
6104 .id_table
= be_dev_ids
,
6106 .remove
= be_remove
,
6107 .driver
.pm
= &be_pci_pm_ops
,
6108 .shutdown
= be_shutdown
,
6109 .sriov_configure
= be_pci_sriov_configure
,
6110 .err_handler
= &be_eeh_handlers
6113 static int __init
be_init_module(void)
6117 if (rx_frag_size
!= 8192 && rx_frag_size
!= 4096 &&
6118 rx_frag_size
!= 2048) {
6119 printk(KERN_WARNING DRV_NAME
6120 " : Module param rx_frag_size must be 2048/4096/8192."
6122 rx_frag_size
= 2048;
6126 pr_info(DRV_NAME
" : Module param num_vfs is obsolete.");
6127 pr_info(DRV_NAME
" : Use sysfs method to enable VFs\n");
6130 be_wq
= create_singlethread_workqueue("be_wq");
6132 pr_warn(DRV_NAME
"workqueue creation failed\n");
6136 be_err_recovery_workq
=
6137 create_singlethread_workqueue("be_err_recover");
6138 if (!be_err_recovery_workq
)
6139 pr_warn(DRV_NAME
"Could not create error recovery workqueue\n");
6141 status
= pci_register_driver(&be_driver
);
6143 destroy_workqueue(be_wq
);
6144 be_destroy_err_recovery_workq();
6148 module_init(be_init_module
);
6150 static void __exit
be_exit_module(void)
6152 pci_unregister_driver(&be_driver
);
6154 be_destroy_err_recovery_workq();
6157 destroy_workqueue(be_wq
);
6159 module_exit(be_exit_module
);