1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * drivers/net/ethernet/ibm/emac/core.c
5 * Driver for PowerPC 4xx on-chip ethernet controller.
7 * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
8 * <benh@kernel.crashing.org>
10 * Based on the arch/ppc version of the driver:
12 * Copyright (c) 2004, 2005 Zultys Technologies.
13 * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
15 * Based on original work by
16 * Matt Porter <mporter@kernel.crashing.org>
17 * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
18 * Armin Kuster <akuster@mvista.com>
19 * Johnnie Peters <jpeters@mvista.com>
22 #include <linux/module.h>
23 #include <linux/sched.h>
24 #include <linux/string.h>
25 #include <linux/errno.h>
26 #include <linux/delay.h>
27 #include <linux/types.h>
28 #include <linux/pci.h>
29 #include <linux/etherdevice.h>
30 #include <linux/skbuff.h>
31 #include <linux/crc32.h>
32 #include <linux/ethtool.h>
33 #include <linux/mii.h>
34 #include <linux/bitops.h>
35 #include <linux/workqueue.h>
37 #include <linux/of_address.h>
38 #include <linux/of_irq.h>
39 #include <linux/of_net.h>
40 #include <linux/of_mdio.h>
41 #include <linux/slab.h>
43 #include <asm/processor.h>
46 #include <linux/uaccess.h>
48 #include <asm/dcr-regs.h>
53 * Lack of dma_unmap_???? calls is intentional.
55 * API-correct usage requires additional support state information to be
56 * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to
57 * EMAC design (e.g. TX buffer passed from network stack can be split into
58 * several BDs, dma_map_single/dma_map_page can be used to map particular BD),
59 * maintaining such information will add additional overhead.
60 * Current DMA API implementation for 4xx processors only ensures cache coherency
61 * and dma_unmap_???? routines are empty and are likely to stay this way.
62 * I decided to omit dma_unmap_??? calls because I don't want to add additional
63 * complexity just for the sake of following some abstract API, when it doesn't
64 * add any real benefit to the driver. I understand that this decision maybe
65 * controversial, but I really tried to make code API-correct and efficient
66 * at the same time and didn't come up with code I liked :(. --ebs
69 #define DRV_NAME "emac"
70 #define DRV_VERSION "3.54"
71 #define DRV_DESC "PPC 4xx OCP EMAC driver"
73 MODULE_DESCRIPTION(DRV_DESC
);
75 ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>");
76 MODULE_LICENSE("GPL");
78 /* minimum number of free TX descriptors required to wake up TX process */
79 #define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4)
81 /* If packet size is less than this number, we allocate small skb and copy packet
82 * contents into it instead of just sending original big skb up
84 #define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD
86 /* Since multiple EMACs share MDIO lines in various ways, we need
87 * to avoid re-using the same PHY ID in cases where the arch didn't
88 * setup precise phy_map entries
90 * XXX This is something that needs to be reworked as we can have multiple
91 * EMAC "sets" (multiple ASICs containing several EMACs) though we can
92 * probably require in that case to have explicit PHY IDs in the device-tree
94 static u32 busy_phy_map
;
95 static DEFINE_MUTEX(emac_phy_map_lock
);
97 /* This is the wait queue used to wait on any event related to probe, that
98 * is discovery of MALs, other EMACs, ZMII/RGMIIs, etc...
100 static DECLARE_WAIT_QUEUE_HEAD(emac_probe_wait
);
102 /* Having stable interface names is a doomed idea. However, it would be nice
103 * if we didn't have completely random interface names at boot too :-) It's
104 * just a matter of making everybody's life easier. Since we are doing
105 * threaded probing, it's a bit harder though. The base idea here is that
106 * we make up a list of all emacs in the device-tree before we register the
107 * driver. Every emac will then wait for the previous one in the list to
108 * initialize before itself. We should also keep that list ordered by
110 * That list is only 4 entries long, meaning that additional EMACs don't
111 * get ordering guarantees unless EMAC_BOOT_LIST_SIZE is increased.
114 #define EMAC_BOOT_LIST_SIZE 4
115 static struct device_node
*emac_boot_list
[EMAC_BOOT_LIST_SIZE
];
117 /* How long should I wait for dependent devices ? */
118 #define EMAC_PROBE_DEP_TIMEOUT (HZ * 5)
120 /* I don't want to litter system log with timeout errors
121 * when we have brain-damaged PHY.
123 static inline void emac_report_timeout_error(struct emac_instance
*dev
,
126 if (emac_has_feature(dev
, EMAC_FTR_440GX_PHY_CLK_FIX
|
127 EMAC_FTR_460EX_PHY_CLK_FIX
|
128 EMAC_FTR_440EP_PHY_CLK_FIX
))
129 DBG(dev
, "%s" NL
, error
);
130 else if (net_ratelimit())
131 printk(KERN_ERR
"%pOF: %s\n", dev
->ofdev
->dev
.of_node
, error
);
134 /* EMAC PHY clock workaround:
135 * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX,
136 * which allows controlling each EMAC clock
138 static inline void emac_rx_clk_tx(struct emac_instance
*dev
)
140 #ifdef CONFIG_PPC_DCR_NATIVE
141 if (emac_has_feature(dev
, EMAC_FTR_440EP_PHY_CLK_FIX
))
142 dcri_clrset(SDR0
, SDR0_MFR
,
143 0, SDR0_MFR_ECS
>> dev
->cell_index
);
147 static inline void emac_rx_clk_default(struct emac_instance
*dev
)
149 #ifdef CONFIG_PPC_DCR_NATIVE
150 if (emac_has_feature(dev
, EMAC_FTR_440EP_PHY_CLK_FIX
))
151 dcri_clrset(SDR0
, SDR0_MFR
,
152 SDR0_MFR_ECS
>> dev
->cell_index
, 0);
156 /* PHY polling intervals */
157 #define PHY_POLL_LINK_ON HZ
158 #define PHY_POLL_LINK_OFF (HZ / 5)
160 /* Graceful stop timeouts in us.
161 * We should allow up to 1 frame time (full-duplex, ignoring collisions)
163 #define STOP_TIMEOUT_10 1230
164 #define STOP_TIMEOUT_100 124
165 #define STOP_TIMEOUT_1000 13
166 #define STOP_TIMEOUT_1000_JUMBO 73
168 static unsigned char default_mcast_addr
[] = {
169 0x01, 0x80, 0xC2, 0x00, 0x00, 0x01
172 /* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
173 static const char emac_stats_keys
[EMAC_ETHTOOL_STATS_COUNT
][ETH_GSTRING_LEN
] = {
174 "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
175 "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom",
176 "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu",
177 "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet",
178 "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error",
179 "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range",
180 "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun",
181 "rx_bad_packet", "rx_runt_packet", "rx_short_event",
182 "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long",
183 "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors",
184 "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral",
185 "tx_bd_excessive_collisions", "tx_bd_late_collision",
186 "tx_bd_multple_collisions", "tx_bd_single_collision",
187 "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe",
191 static irqreturn_t
emac_irq(int irq
, void *dev_instance
);
192 static void emac_clean_tx_ring(struct emac_instance
*dev
);
193 static void __emac_set_multicast_list(struct emac_instance
*dev
);
195 static inline int emac_phy_supports_gige(int phy_mode
)
197 return phy_interface_mode_is_rgmii(phy_mode
) ||
198 phy_mode
== PHY_INTERFACE_MODE_GMII
||
199 phy_mode
== PHY_INTERFACE_MODE_SGMII
||
200 phy_mode
== PHY_INTERFACE_MODE_TBI
||
201 phy_mode
== PHY_INTERFACE_MODE_RTBI
;
204 static inline int emac_phy_gpcs(int phy_mode
)
206 return phy_mode
== PHY_INTERFACE_MODE_SGMII
||
207 phy_mode
== PHY_INTERFACE_MODE_TBI
||
208 phy_mode
== PHY_INTERFACE_MODE_RTBI
;
211 static inline void emac_tx_enable(struct emac_instance
*dev
)
213 struct emac_regs __iomem
*p
= dev
->emacp
;
216 DBG(dev
, "tx_enable" NL
);
218 r
= in_be32(&p
->mr0
);
219 if (!(r
& EMAC_MR0_TXE
))
220 out_be32(&p
->mr0
, r
| EMAC_MR0_TXE
);
223 static void emac_tx_disable(struct emac_instance
*dev
)
225 struct emac_regs __iomem
*p
= dev
->emacp
;
228 DBG(dev
, "tx_disable" NL
);
230 r
= in_be32(&p
->mr0
);
231 if (r
& EMAC_MR0_TXE
) {
232 int n
= dev
->stop_timeout
;
233 out_be32(&p
->mr0
, r
& ~EMAC_MR0_TXE
);
234 while (!(in_be32(&p
->mr0
) & EMAC_MR0_TXI
) && n
) {
239 emac_report_timeout_error(dev
, "TX disable timeout");
243 static void emac_rx_enable(struct emac_instance
*dev
)
245 struct emac_regs __iomem
*p
= dev
->emacp
;
248 if (unlikely(test_bit(MAL_COMMAC_RX_STOPPED
, &dev
->commac
.flags
)))
251 DBG(dev
, "rx_enable" NL
);
253 r
= in_be32(&p
->mr0
);
254 if (!(r
& EMAC_MR0_RXE
)) {
255 if (unlikely(!(r
& EMAC_MR0_RXI
))) {
256 /* Wait if previous async disable is still in progress */
257 int n
= dev
->stop_timeout
;
258 while (!(r
= in_be32(&p
->mr0
) & EMAC_MR0_RXI
) && n
) {
263 emac_report_timeout_error(dev
,
264 "RX disable timeout");
266 out_be32(&p
->mr0
, r
| EMAC_MR0_RXE
);
272 static void emac_rx_disable(struct emac_instance
*dev
)
274 struct emac_regs __iomem
*p
= dev
->emacp
;
277 DBG(dev
, "rx_disable" NL
);
279 r
= in_be32(&p
->mr0
);
280 if (r
& EMAC_MR0_RXE
) {
281 int n
= dev
->stop_timeout
;
282 out_be32(&p
->mr0
, r
& ~EMAC_MR0_RXE
);
283 while (!(in_be32(&p
->mr0
) & EMAC_MR0_RXI
) && n
) {
288 emac_report_timeout_error(dev
, "RX disable timeout");
292 static inline void emac_netif_stop(struct emac_instance
*dev
)
294 netif_tx_lock_bh(dev
->ndev
);
295 netif_addr_lock(dev
->ndev
);
297 netif_addr_unlock(dev
->ndev
);
298 netif_tx_unlock_bh(dev
->ndev
);
299 netif_trans_update(dev
->ndev
); /* prevent tx timeout */
300 mal_poll_disable(dev
->mal
, &dev
->commac
);
301 netif_tx_disable(dev
->ndev
);
304 static inline void emac_netif_start(struct emac_instance
*dev
)
306 netif_tx_lock_bh(dev
->ndev
);
307 netif_addr_lock(dev
->ndev
);
309 if (dev
->mcast_pending
&& netif_running(dev
->ndev
))
310 __emac_set_multicast_list(dev
);
311 netif_addr_unlock(dev
->ndev
);
312 netif_tx_unlock_bh(dev
->ndev
);
314 netif_wake_queue(dev
->ndev
);
316 /* NOTE: unconditional netif_wake_queue is only appropriate
317 * so long as all callers are assured to have free tx slots
318 * (taken from tg3... though the case where that is wrong is
319 * not terribly harmful)
321 mal_poll_enable(dev
->mal
, &dev
->commac
);
324 static inline void emac_rx_disable_async(struct emac_instance
*dev
)
326 struct emac_regs __iomem
*p
= dev
->emacp
;
329 DBG(dev
, "rx_disable_async" NL
);
331 r
= in_be32(&p
->mr0
);
332 if (r
& EMAC_MR0_RXE
)
333 out_be32(&p
->mr0
, r
& ~EMAC_MR0_RXE
);
336 static int emac_reset(struct emac_instance
*dev
)
338 struct emac_regs __iomem
*p
= dev
->emacp
;
340 bool __maybe_unused try_internal_clock
= false;
342 DBG(dev
, "reset" NL
);
344 if (!dev
->reset_failed
) {
345 /* 40x erratum suggests stopping RX channel before reset,
348 emac_rx_disable(dev
);
349 emac_tx_disable(dev
);
352 #ifdef CONFIG_PPC_DCR_NATIVE
355 * PPC460EX/GT Embedded Processor Advanced User's Manual
356 * section 28.10.1 Mode Register 0 (EMACx_MR0) states:
357 * Note: The PHY must provide a TX Clk in order to perform a soft reset
358 * of the EMAC. If none is present, select the internal clock
359 * (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1).
360 * After a soft reset, select the external clock.
362 * The AR8035-A PHY Meraki MR24 does not provide a TX Clk if the
363 * ethernet cable is not attached. This causes the reset to timeout
364 * and the PHY detection code in emac_init_phy() is unable to
365 * communicate and detect the AR8035-A PHY. As a result, the emac
366 * driver bails out early and the user has no ethernet.
367 * In order to stay compatible with existing configurations, the
368 * driver will temporarily switch to the internal clock, after
369 * the first reset fails.
371 if (emac_has_feature(dev
, EMAC_FTR_460EX_PHY_CLK_FIX
)) {
372 if (try_internal_clock
|| (dev
->phy_address
== 0xffffffff &&
373 dev
->phy_map
== 0xffffffff)) {
374 /* No PHY: select internal loop clock before reset */
375 dcri_clrset(SDR0
, SDR0_ETH_CFG
,
376 0, SDR0_ETH_CFG_ECS
<< dev
->cell_index
);
378 /* PHY present: select external clock before reset */
379 dcri_clrset(SDR0
, SDR0_ETH_CFG
,
380 SDR0_ETH_CFG_ECS
<< dev
->cell_index
, 0);
385 out_be32(&p
->mr0
, EMAC_MR0_SRST
);
386 while ((in_be32(&p
->mr0
) & EMAC_MR0_SRST
) && n
)
389 #ifdef CONFIG_PPC_DCR_NATIVE
390 if (emac_has_feature(dev
, EMAC_FTR_460EX_PHY_CLK_FIX
)) {
391 if (!n
&& !try_internal_clock
) {
392 /* first attempt has timed out. */
394 try_internal_clock
= true;
398 if (try_internal_clock
|| (dev
->phy_address
== 0xffffffff &&
399 dev
->phy_map
== 0xffffffff)) {
400 /* No PHY: restore external clock source after reset */
401 dcri_clrset(SDR0
, SDR0_ETH_CFG
,
402 SDR0_ETH_CFG_ECS
<< dev
->cell_index
, 0);
408 dev
->reset_failed
= 0;
411 emac_report_timeout_error(dev
, "reset timeout");
412 dev
->reset_failed
= 1;
417 static void emac_hash_mc(struct emac_instance
*dev
)
419 const int regs
= EMAC_XAHT_REGS(dev
);
420 u32
*gaht_base
= emac_gaht_base(dev
);
421 u32 gaht_temp
[EMAC_XAHT_MAX_REGS
];
422 struct netdev_hw_addr
*ha
;
425 DBG(dev
, "hash_mc %d" NL
, netdev_mc_count(dev
->ndev
));
427 memset(gaht_temp
, 0, sizeof (gaht_temp
));
429 netdev_for_each_mc_addr(ha
, dev
->ndev
) {
431 DBG2(dev
, "mc %pM" NL
, ha
->addr
);
433 slot
= EMAC_XAHT_CRC_TO_SLOT(dev
,
434 ether_crc(ETH_ALEN
, ha
->addr
));
435 reg
= EMAC_XAHT_SLOT_TO_REG(dev
, slot
);
436 mask
= EMAC_XAHT_SLOT_TO_MASK(dev
, slot
);
438 gaht_temp
[reg
] |= mask
;
441 for (i
= 0; i
< regs
; i
++)
442 out_be32(gaht_base
+ i
, gaht_temp
[i
]);
445 static inline u32
emac_iff2rmr(struct net_device
*ndev
)
447 struct emac_instance
*dev
= netdev_priv(ndev
);
450 r
= EMAC_RMR_SP
| EMAC_RMR_SFCS
| EMAC_RMR_IAE
| EMAC_RMR_BAE
;
452 if (emac_has_feature(dev
, EMAC_FTR_EMAC4
))
457 if (ndev
->flags
& IFF_PROMISC
)
459 else if (ndev
->flags
& IFF_ALLMULTI
||
460 (netdev_mc_count(ndev
) > EMAC_XAHT_SLOTS(dev
)))
462 else if (!netdev_mc_empty(ndev
))
465 if (emac_has_feature(dev
, EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE
)) {
466 r
&= ~EMAC4_RMR_MJS_MASK
;
467 r
|= EMAC4_RMR_MJS(ndev
->mtu
);
473 static u32
__emac_calc_base_mr1(struct emac_instance
*dev
, int tx_size
, int rx_size
)
475 u32 ret
= EMAC_MR1_VLE
| EMAC_MR1_IST
| EMAC_MR1_TR0_MULT
;
477 DBG2(dev
, "__emac_calc_base_mr1" NL
);
481 ret
|= EMAC_MR1_TFS_2K
;
484 printk(KERN_WARNING
"%s: Unknown Tx FIFO size %d\n",
485 dev
->ndev
->name
, tx_size
);
490 ret
|= EMAC_MR1_RFS_16K
;
493 ret
|= EMAC_MR1_RFS_4K
;
496 printk(KERN_WARNING
"%s: Unknown Rx FIFO size %d\n",
497 dev
->ndev
->name
, rx_size
);
503 static u32
__emac4_calc_base_mr1(struct emac_instance
*dev
, int tx_size
, int rx_size
)
505 u32 ret
= EMAC_MR1_VLE
| EMAC_MR1_IST
| EMAC4_MR1_TR
|
506 EMAC4_MR1_OBCI(dev
->opb_bus_freq
/ 1000000);
508 DBG2(dev
, "__emac4_calc_base_mr1" NL
);
512 ret
|= EMAC4_MR1_TFS_16K
;
515 ret
|= EMAC4_MR1_TFS_8K
;
518 ret
|= EMAC4_MR1_TFS_4K
;
521 ret
|= EMAC4_MR1_TFS_2K
;
524 printk(KERN_WARNING
"%s: Unknown Tx FIFO size %d\n",
525 dev
->ndev
->name
, tx_size
);
530 ret
|= EMAC4_MR1_RFS_16K
;
533 ret
|= EMAC4_MR1_RFS_8K
;
536 ret
|= EMAC4_MR1_RFS_4K
;
539 ret
|= EMAC4_MR1_RFS_2K
;
542 printk(KERN_WARNING
"%s: Unknown Rx FIFO size %d\n",
543 dev
->ndev
->name
, rx_size
);
549 static u32
emac_calc_base_mr1(struct emac_instance
*dev
, int tx_size
, int rx_size
)
551 return emac_has_feature(dev
, EMAC_FTR_EMAC4
) ?
552 __emac4_calc_base_mr1(dev
, tx_size
, rx_size
) :
553 __emac_calc_base_mr1(dev
, tx_size
, rx_size
);
556 static inline u32
emac_calc_trtr(struct emac_instance
*dev
, unsigned int size
)
558 if (emac_has_feature(dev
, EMAC_FTR_EMAC4
))
559 return ((size
>> 6) - 1) << EMAC_TRTR_SHIFT_EMAC4
;
561 return ((size
>> 6) - 1) << EMAC_TRTR_SHIFT
;
564 static inline u32
emac_calc_rwmr(struct emac_instance
*dev
,
565 unsigned int low
, unsigned int high
)
567 if (emac_has_feature(dev
, EMAC_FTR_EMAC4
))
568 return (low
<< 22) | ( (high
& 0x3ff) << 6);
570 return (low
<< 23) | ( (high
& 0x1ff) << 7);
573 static int emac_configure(struct emac_instance
*dev
)
575 struct emac_regs __iomem
*p
= dev
->emacp
;
576 struct net_device
*ndev
= dev
->ndev
;
577 int tx_size
, rx_size
, link
= netif_carrier_ok(dev
->ndev
);
580 DBG(dev
, "configure" NL
);
583 out_be32(&p
->mr1
, in_be32(&p
->mr1
)
584 | EMAC_MR1_FDE
| EMAC_MR1_ILE
);
586 } else if (emac_reset(dev
) < 0)
589 if (emac_has_feature(dev
, EMAC_FTR_HAS_TAH
))
590 tah_reset(dev
->tah_dev
);
592 DBG(dev
, " link = %d duplex = %d, pause = %d, asym_pause = %d\n",
593 link
, dev
->phy
.duplex
, dev
->phy
.pause
, dev
->phy
.asym_pause
);
595 /* Default fifo sizes */
596 tx_size
= dev
->tx_fifo_size
;
597 rx_size
= dev
->rx_fifo_size
;
599 /* No link, force loopback */
601 mr1
= EMAC_MR1_FDE
| EMAC_MR1_ILE
;
603 /* Check for full duplex */
604 else if (dev
->phy
.duplex
== DUPLEX_FULL
)
605 mr1
|= EMAC_MR1_FDE
| EMAC_MR1_MWSW_001
;
607 /* Adjust fifo sizes, mr1 and timeouts based on link speed */
608 dev
->stop_timeout
= STOP_TIMEOUT_10
;
609 switch (dev
->phy
.speed
) {
611 if (emac_phy_gpcs(dev
->phy
.mode
)) {
612 mr1
|= EMAC_MR1_MF_1000GPCS
| EMAC_MR1_MF_IPPA(
613 (dev
->phy
.gpcs_address
!= 0xffffffff) ?
614 dev
->phy
.gpcs_address
: dev
->phy
.address
);
616 /* Put some arbitrary OUI, Manuf & Rev IDs so we can
617 * identify this GPCS PHY later.
619 out_be32(&p
->u1
.emac4
.ipcr
, 0xdeadbeef);
621 mr1
|= EMAC_MR1_MF_1000
;
623 /* Extended fifo sizes */
624 tx_size
= dev
->tx_fifo_size_gige
;
625 rx_size
= dev
->rx_fifo_size_gige
;
627 if (dev
->ndev
->mtu
> ETH_DATA_LEN
) {
628 if (emac_has_feature(dev
, EMAC_FTR_EMAC4
))
629 mr1
|= EMAC4_MR1_JPSM
;
631 mr1
|= EMAC_MR1_JPSM
;
632 dev
->stop_timeout
= STOP_TIMEOUT_1000_JUMBO
;
634 dev
->stop_timeout
= STOP_TIMEOUT_1000
;
637 mr1
|= EMAC_MR1_MF_100
;
638 dev
->stop_timeout
= STOP_TIMEOUT_100
;
640 default: /* make gcc happy */
644 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
))
645 rgmii_set_speed(dev
->rgmii_dev
, dev
->rgmii_port
,
647 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
))
648 zmii_set_speed(dev
->zmii_dev
, dev
->zmii_port
, dev
->phy
.speed
);
650 /* on 40x erratum forces us to NOT use integrated flow control,
651 * let's hope it works on 44x ;)
653 if (!emac_has_feature(dev
, EMAC_FTR_NO_FLOW_CONTROL_40x
) &&
654 dev
->phy
.duplex
== DUPLEX_FULL
) {
656 mr1
|= EMAC_MR1_EIFC
| EMAC_MR1_APP
;
657 else if (dev
->phy
.asym_pause
)
661 /* Add base settings & fifo sizes & program MR1 */
662 mr1
|= emac_calc_base_mr1(dev
, tx_size
, rx_size
);
663 out_be32(&p
->mr1
, mr1
);
665 /* Set individual MAC address */
666 out_be32(&p
->iahr
, (ndev
->dev_addr
[0] << 8) | ndev
->dev_addr
[1]);
667 out_be32(&p
->ialr
, (ndev
->dev_addr
[2] << 24) |
668 (ndev
->dev_addr
[3] << 16) | (ndev
->dev_addr
[4] << 8) |
671 /* VLAN Tag Protocol ID */
672 out_be32(&p
->vtpid
, 0x8100);
674 /* Receive mode register */
675 r
= emac_iff2rmr(ndev
);
676 if (r
& EMAC_RMR_MAE
)
678 out_be32(&p
->rmr
, r
);
680 /* FIFOs thresholds */
681 if (emac_has_feature(dev
, EMAC_FTR_EMAC4
))
682 r
= EMAC4_TMR1((dev
->mal_burst_size
/ dev
->fifo_entry_size
) + 1,
683 tx_size
/ 2 / dev
->fifo_entry_size
);
685 r
= EMAC_TMR1((dev
->mal_burst_size
/ dev
->fifo_entry_size
) + 1,
686 tx_size
/ 2 / dev
->fifo_entry_size
);
687 out_be32(&p
->tmr1
, r
);
688 out_be32(&p
->trtr
, emac_calc_trtr(dev
, tx_size
/ 2));
690 /* PAUSE frame is sent when RX FIFO reaches its high-water mark,
691 there should be still enough space in FIFO to allow the our link
692 partner time to process this frame and also time to send PAUSE
695 Here is the worst case scenario for the RX FIFO "headroom"
696 (from "The Switch Book") (100Mbps, without preamble, inter-frame gap):
698 1) One maximum-length frame on TX 1522 bytes
699 2) One PAUSE frame time 64 bytes
700 3) PAUSE frame decode time allowance 64 bytes
701 4) One maximum-length frame on RX 1522 bytes
702 5) Round-trip propagation delay of the link (100Mb) 15 bytes
706 I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes)
707 low-water mark to RX_FIFO_SIZE / 8 (512 bytes)
709 r
= emac_calc_rwmr(dev
, rx_size
/ 8 / dev
->fifo_entry_size
,
710 rx_size
/ 4 / dev
->fifo_entry_size
);
711 out_be32(&p
->rwmr
, r
);
713 /* Set PAUSE timer to the maximum */
714 out_be32(&p
->ptr
, 0xffff);
717 r
= EMAC_ISR_OVR
| EMAC_ISR_BP
| EMAC_ISR_SE
|
718 EMAC_ISR_ALE
| EMAC_ISR_BFCS
| EMAC_ISR_PTLE
| EMAC_ISR_ORE
|
719 EMAC_ISR_IRE
| EMAC_ISR_TE
;
720 if (emac_has_feature(dev
, EMAC_FTR_EMAC4
))
721 r
|= EMAC4_ISR_TXPE
| EMAC4_ISR_RXPE
/* | EMAC4_ISR_TXUE |
723 out_be32(&p
->iser
, r
);
725 /* We need to take GPCS PHY out of isolate mode after EMAC reset */
726 if (emac_phy_gpcs(dev
->phy
.mode
)) {
727 if (dev
->phy
.gpcs_address
!= 0xffffffff)
728 emac_mii_reset_gpcs(&dev
->phy
);
730 emac_mii_reset_phy(&dev
->phy
);
736 static void emac_reinitialize(struct emac_instance
*dev
)
738 DBG(dev
, "reinitialize" NL
);
740 emac_netif_stop(dev
);
741 if (!emac_configure(dev
)) {
745 emac_netif_start(dev
);
748 static void emac_full_tx_reset(struct emac_instance
*dev
)
750 DBG(dev
, "full_tx_reset" NL
);
752 emac_tx_disable(dev
);
753 mal_disable_tx_channel(dev
->mal
, dev
->mal_tx_chan
);
754 emac_clean_tx_ring(dev
);
755 dev
->tx_cnt
= dev
->tx_slot
= dev
->ack_slot
= 0;
759 mal_enable_tx_channel(dev
->mal
, dev
->mal_tx_chan
);
764 static void emac_reset_work(struct work_struct
*work
)
766 struct emac_instance
*dev
= container_of(work
, struct emac_instance
, reset_work
);
768 DBG(dev
, "reset_work" NL
);
770 mutex_lock(&dev
->link_lock
);
772 emac_netif_stop(dev
);
773 emac_full_tx_reset(dev
);
774 emac_netif_start(dev
);
776 mutex_unlock(&dev
->link_lock
);
779 static void emac_tx_timeout(struct net_device
*ndev
, unsigned int txqueue
)
781 struct emac_instance
*dev
= netdev_priv(ndev
);
783 DBG(dev
, "tx_timeout" NL
);
785 schedule_work(&dev
->reset_work
);
789 static inline int emac_phy_done(struct emac_instance
*dev
, u32 stacr
)
791 int done
= !!(stacr
& EMAC_STACR_OC
);
793 if (emac_has_feature(dev
, EMAC_FTR_STACR_OC_INVERT
))
799 static int __emac_mdio_read(struct emac_instance
*dev
, u8 id
, u8 reg
)
801 struct emac_regs __iomem
*p
= dev
->emacp
;
803 int n
, err
= -ETIMEDOUT
;
805 mutex_lock(&dev
->mdio_lock
);
807 DBG2(dev
, "mdio_read(%02x,%02x)" NL
, id
, reg
);
809 /* Enable proper MDIO port */
810 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
))
811 zmii_get_mdio(dev
->zmii_dev
, dev
->zmii_port
);
812 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
))
813 rgmii_get_mdio(dev
->rgmii_dev
, dev
->rgmii_port
);
815 /* Wait for management interface to become idle */
817 while (!emac_phy_done(dev
, in_be32(&p
->stacr
))) {
820 DBG2(dev
, " -> timeout wait idle\n");
825 /* Issue read command */
826 if (emac_has_feature(dev
, EMAC_FTR_EMAC4
))
827 r
= EMAC4_STACR_BASE(dev
->opb_bus_freq
);
829 r
= EMAC_STACR_BASE(dev
->opb_bus_freq
);
830 if (emac_has_feature(dev
, EMAC_FTR_STACR_OC_INVERT
))
832 if (emac_has_feature(dev
, EMAC_FTR_HAS_NEW_STACR
))
833 r
|= EMACX_STACR_STAC_READ
;
835 r
|= EMAC_STACR_STAC_READ
;
836 r
|= (reg
& EMAC_STACR_PRA_MASK
)
837 | ((id
& EMAC_STACR_PCDA_MASK
) << EMAC_STACR_PCDA_SHIFT
);
838 out_be32(&p
->stacr
, r
);
840 /* Wait for read to complete */
842 while (!emac_phy_done(dev
, (r
= in_be32(&p
->stacr
)))) {
845 DBG2(dev
, " -> timeout wait complete\n");
850 if (unlikely(r
& EMAC_STACR_PHYE
)) {
851 DBG(dev
, "mdio_read(%02x, %02x) failed" NL
, id
, reg
);
856 r
= ((r
>> EMAC_STACR_PHYD_SHIFT
) & EMAC_STACR_PHYD_MASK
);
858 DBG2(dev
, "mdio_read -> %04x" NL
, r
);
861 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
))
862 rgmii_put_mdio(dev
->rgmii_dev
, dev
->rgmii_port
);
863 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
))
864 zmii_put_mdio(dev
->zmii_dev
, dev
->zmii_port
);
865 mutex_unlock(&dev
->mdio_lock
);
867 return err
== 0 ? r
: err
;
870 static void __emac_mdio_write(struct emac_instance
*dev
, u8 id
, u8 reg
,
873 struct emac_regs __iomem
*p
= dev
->emacp
;
877 mutex_lock(&dev
->mdio_lock
);
879 DBG2(dev
, "mdio_write(%02x,%02x,%04x)" NL
, id
, reg
, val
);
881 /* Enable proper MDIO port */
882 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
))
883 zmii_get_mdio(dev
->zmii_dev
, dev
->zmii_port
);
884 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
))
885 rgmii_get_mdio(dev
->rgmii_dev
, dev
->rgmii_port
);
887 /* Wait for management interface to be idle */
889 while (!emac_phy_done(dev
, in_be32(&p
->stacr
))) {
892 DBG2(dev
, " -> timeout wait idle\n");
897 /* Issue write command */
898 if (emac_has_feature(dev
, EMAC_FTR_EMAC4
))
899 r
= EMAC4_STACR_BASE(dev
->opb_bus_freq
);
901 r
= EMAC_STACR_BASE(dev
->opb_bus_freq
);
902 if (emac_has_feature(dev
, EMAC_FTR_STACR_OC_INVERT
))
904 if (emac_has_feature(dev
, EMAC_FTR_HAS_NEW_STACR
))
905 r
|= EMACX_STACR_STAC_WRITE
;
907 r
|= EMAC_STACR_STAC_WRITE
;
908 r
|= (reg
& EMAC_STACR_PRA_MASK
) |
909 ((id
& EMAC_STACR_PCDA_MASK
) << EMAC_STACR_PCDA_SHIFT
) |
910 (val
<< EMAC_STACR_PHYD_SHIFT
);
911 out_be32(&p
->stacr
, r
);
913 /* Wait for write to complete */
915 while (!emac_phy_done(dev
, in_be32(&p
->stacr
))) {
918 DBG2(dev
, " -> timeout wait complete\n");
923 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
))
924 rgmii_put_mdio(dev
->rgmii_dev
, dev
->rgmii_port
);
925 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
))
926 zmii_put_mdio(dev
->zmii_dev
, dev
->zmii_port
);
927 mutex_unlock(&dev
->mdio_lock
);
930 static int emac_mdio_read(struct net_device
*ndev
, int id
, int reg
)
932 struct emac_instance
*dev
= netdev_priv(ndev
);
935 res
= __emac_mdio_read((dev
->mdio_instance
&&
936 dev
->phy
.gpcs_address
!= id
) ?
937 dev
->mdio_instance
: dev
,
942 static void emac_mdio_write(struct net_device
*ndev
, int id
, int reg
, int val
)
944 struct emac_instance
*dev
= netdev_priv(ndev
);
946 __emac_mdio_write((dev
->mdio_instance
&&
947 dev
->phy
.gpcs_address
!= id
) ?
948 dev
->mdio_instance
: dev
,
949 (u8
) id
, (u8
) reg
, (u16
) val
);
953 static void __emac_set_multicast_list(struct emac_instance
*dev
)
955 struct emac_regs __iomem
*p
= dev
->emacp
;
956 u32 rmr
= emac_iff2rmr(dev
->ndev
);
958 DBG(dev
, "__multicast %08x" NL
, rmr
);
960 /* I decided to relax register access rules here to avoid
963 * There is a real problem with EMAC4 core if we use MWSW_001 bit
964 * in MR1 register and do a full EMAC reset.
965 * One TX BD status update is delayed and, after EMAC reset, it
966 * never happens, resulting in TX hung (it'll be recovered by TX
967 * timeout handler eventually, but this is just gross).
968 * So we either have to do full TX reset or try to cheat here :)
970 * The only required change is to RX mode register, so I *think* all
971 * we need is just to stop RX channel. This seems to work on all
974 * If we need the full reset, we might just trigger the workqueue
975 * and do it async... a bit nasty but should work --BenH
977 dev
->mcast_pending
= 0;
978 emac_rx_disable(dev
);
979 if (rmr
& EMAC_RMR_MAE
)
981 out_be32(&p
->rmr
, rmr
);
986 static void emac_set_multicast_list(struct net_device
*ndev
)
988 struct emac_instance
*dev
= netdev_priv(ndev
);
990 DBG(dev
, "multicast" NL
);
992 BUG_ON(!netif_running(dev
->ndev
));
995 dev
->mcast_pending
= 1;
999 mutex_lock(&dev
->link_lock
);
1000 __emac_set_multicast_list(dev
);
1001 mutex_unlock(&dev
->link_lock
);
1004 static int emac_set_mac_address(struct net_device
*ndev
, void *sa
)
1006 struct emac_instance
*dev
= netdev_priv(ndev
);
1007 struct sockaddr
*addr
= sa
;
1008 struct emac_regs __iomem
*p
= dev
->emacp
;
1010 if (!is_valid_ether_addr(addr
->sa_data
))
1011 return -EADDRNOTAVAIL
;
1013 mutex_lock(&dev
->link_lock
);
1015 memcpy(ndev
->dev_addr
, addr
->sa_data
, ndev
->addr_len
);
1017 emac_rx_disable(dev
);
1018 emac_tx_disable(dev
);
1019 out_be32(&p
->iahr
, (ndev
->dev_addr
[0] << 8) | ndev
->dev_addr
[1]);
1020 out_be32(&p
->ialr
, (ndev
->dev_addr
[2] << 24) |
1021 (ndev
->dev_addr
[3] << 16) | (ndev
->dev_addr
[4] << 8) |
1023 emac_tx_enable(dev
);
1024 emac_rx_enable(dev
);
1026 mutex_unlock(&dev
->link_lock
);
1031 static int emac_resize_rx_ring(struct emac_instance
*dev
, int new_mtu
)
1033 int rx_sync_size
= emac_rx_sync_size(new_mtu
);
1034 int rx_skb_size
= emac_rx_skb_size(new_mtu
);
1036 int mr1_jumbo_bit_change
= 0;
1038 mutex_lock(&dev
->link_lock
);
1039 emac_netif_stop(dev
);
1040 emac_rx_disable(dev
);
1041 mal_disable_rx_channel(dev
->mal
, dev
->mal_rx_chan
);
1043 if (dev
->rx_sg_skb
) {
1044 ++dev
->estats
.rx_dropped_resize
;
1045 dev_kfree_skb(dev
->rx_sg_skb
);
1046 dev
->rx_sg_skb
= NULL
;
1049 /* Make a first pass over RX ring and mark BDs ready, dropping
1050 * non-processed packets on the way. We need this as a separate pass
1051 * to simplify error recovery in the case of allocation failure later.
1053 for (i
= 0; i
< NUM_RX_BUFF
; ++i
) {
1054 if (dev
->rx_desc
[i
].ctrl
& MAL_RX_CTRL_FIRST
)
1055 ++dev
->estats
.rx_dropped_resize
;
1057 dev
->rx_desc
[i
].data_len
= 0;
1058 dev
->rx_desc
[i
].ctrl
= MAL_RX_CTRL_EMPTY
|
1059 (i
== (NUM_RX_BUFF
- 1) ? MAL_RX_CTRL_WRAP
: 0);
1062 /* Reallocate RX ring only if bigger skb buffers are required */
1063 if (rx_skb_size
<= dev
->rx_skb_size
)
1066 /* Second pass, allocate new skbs */
1067 for (i
= 0; i
< NUM_RX_BUFF
; ++i
) {
1068 struct sk_buff
*skb
;
1070 skb
= netdev_alloc_skb_ip_align(dev
->ndev
, rx_skb_size
);
1076 BUG_ON(!dev
->rx_skb
[i
]);
1077 dev_kfree_skb(dev
->rx_skb
[i
]);
1079 dev
->rx_desc
[i
].data_ptr
=
1080 dma_map_single(&dev
->ofdev
->dev
, skb
->data
- NET_IP_ALIGN
,
1081 rx_sync_size
, DMA_FROM_DEVICE
)
1083 dev
->rx_skb
[i
] = skb
;
1086 /* Check if we need to change "Jumbo" bit in MR1 */
1087 if (emac_has_feature(dev
, EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE
)) {
1088 mr1_jumbo_bit_change
= (new_mtu
> ETH_DATA_LEN
) ||
1089 (dev
->ndev
->mtu
> ETH_DATA_LEN
);
1091 mr1_jumbo_bit_change
= (new_mtu
> ETH_DATA_LEN
) ^
1092 (dev
->ndev
->mtu
> ETH_DATA_LEN
);
1095 if (mr1_jumbo_bit_change
) {
1096 /* This is to prevent starting RX channel in emac_rx_enable() */
1097 set_bit(MAL_COMMAC_RX_STOPPED
, &dev
->commac
.flags
);
1099 dev
->ndev
->mtu
= new_mtu
;
1100 emac_full_tx_reset(dev
);
1103 mal_set_rcbs(dev
->mal
, dev
->mal_rx_chan
, emac_rx_size(new_mtu
));
1106 clear_bit(MAL_COMMAC_RX_STOPPED
, &dev
->commac
.flags
);
1108 mal_enable_rx_channel(dev
->mal
, dev
->mal_rx_chan
);
1109 emac_rx_enable(dev
);
1110 emac_netif_start(dev
);
1111 mutex_unlock(&dev
->link_lock
);
1116 /* Process ctx, rtnl_lock semaphore */
1117 static int emac_change_mtu(struct net_device
*ndev
, int new_mtu
)
1119 struct emac_instance
*dev
= netdev_priv(ndev
);
1122 DBG(dev
, "change_mtu(%d)" NL
, new_mtu
);
1124 if (netif_running(ndev
)) {
1125 /* Check if we really need to reinitialize RX ring */
1126 if (emac_rx_skb_size(ndev
->mtu
) != emac_rx_skb_size(new_mtu
))
1127 ret
= emac_resize_rx_ring(dev
, new_mtu
);
1131 ndev
->mtu
= new_mtu
;
1132 dev
->rx_skb_size
= emac_rx_skb_size(new_mtu
);
1133 dev
->rx_sync_size
= emac_rx_sync_size(new_mtu
);
1139 static void emac_clean_tx_ring(struct emac_instance
*dev
)
1143 for (i
= 0; i
< NUM_TX_BUFF
; ++i
) {
1144 if (dev
->tx_skb
[i
]) {
1145 dev_kfree_skb(dev
->tx_skb
[i
]);
1146 dev
->tx_skb
[i
] = NULL
;
1147 if (dev
->tx_desc
[i
].ctrl
& MAL_TX_CTRL_READY
)
1148 ++dev
->estats
.tx_dropped
;
1150 dev
->tx_desc
[i
].ctrl
= 0;
1151 dev
->tx_desc
[i
].data_ptr
= 0;
1155 static void emac_clean_rx_ring(struct emac_instance
*dev
)
1159 for (i
= 0; i
< NUM_RX_BUFF
; ++i
)
1160 if (dev
->rx_skb
[i
]) {
1161 dev
->rx_desc
[i
].ctrl
= 0;
1162 dev_kfree_skb(dev
->rx_skb
[i
]);
1163 dev
->rx_skb
[i
] = NULL
;
1164 dev
->rx_desc
[i
].data_ptr
= 0;
1167 if (dev
->rx_sg_skb
) {
1168 dev_kfree_skb(dev
->rx_sg_skb
);
1169 dev
->rx_sg_skb
= NULL
;
1174 __emac_prepare_rx_skb(struct sk_buff
*skb
, struct emac_instance
*dev
, int slot
)
1179 dev
->rx_skb
[slot
] = skb
;
1180 dev
->rx_desc
[slot
].data_len
= 0;
1182 dev
->rx_desc
[slot
].data_ptr
=
1183 dma_map_single(&dev
->ofdev
->dev
, skb
->data
- NET_IP_ALIGN
,
1184 dev
->rx_sync_size
, DMA_FROM_DEVICE
) + NET_IP_ALIGN
;
1186 dev
->rx_desc
[slot
].ctrl
= MAL_RX_CTRL_EMPTY
|
1187 (slot
== (NUM_RX_BUFF
- 1) ? MAL_RX_CTRL_WRAP
: 0);
1193 emac_alloc_rx_skb(struct emac_instance
*dev
, int slot
)
1195 struct sk_buff
*skb
;
1197 skb
= __netdev_alloc_skb_ip_align(dev
->ndev
, dev
->rx_skb_size
,
1200 return __emac_prepare_rx_skb(skb
, dev
, slot
);
1204 emac_alloc_rx_skb_napi(struct emac_instance
*dev
, int slot
)
1206 struct sk_buff
*skb
;
1208 skb
= napi_alloc_skb(&dev
->mal
->napi
, dev
->rx_skb_size
);
1210 return __emac_prepare_rx_skb(skb
, dev
, slot
);
1213 static void emac_print_link_status(struct emac_instance
*dev
)
1215 if (netif_carrier_ok(dev
->ndev
))
1216 printk(KERN_INFO
"%s: link is up, %d %s%s\n",
1217 dev
->ndev
->name
, dev
->phy
.speed
,
1218 dev
->phy
.duplex
== DUPLEX_FULL
? "FDX" : "HDX",
1219 dev
->phy
.pause
? ", pause enabled" :
1220 dev
->phy
.asym_pause
? ", asymmetric pause enabled" : "");
1222 printk(KERN_INFO
"%s: link is down\n", dev
->ndev
->name
);
1225 /* Process ctx, rtnl_lock semaphore */
1226 static int emac_open(struct net_device
*ndev
)
1228 struct emac_instance
*dev
= netdev_priv(ndev
);
1231 DBG(dev
, "open" NL
);
1233 /* Setup error IRQ handler */
1234 err
= request_irq(dev
->emac_irq
, emac_irq
, 0, "EMAC", dev
);
1236 printk(KERN_ERR
"%s: failed to request IRQ %d\n",
1237 ndev
->name
, dev
->emac_irq
);
1241 /* Allocate RX ring */
1242 for (i
= 0; i
< NUM_RX_BUFF
; ++i
)
1243 if (emac_alloc_rx_skb(dev
, i
)) {
1244 printk(KERN_ERR
"%s: failed to allocate RX ring\n",
1249 dev
->tx_cnt
= dev
->tx_slot
= dev
->ack_slot
= dev
->rx_slot
= 0;
1250 clear_bit(MAL_COMMAC_RX_STOPPED
, &dev
->commac
.flags
);
1251 dev
->rx_sg_skb
= NULL
;
1253 mutex_lock(&dev
->link_lock
);
1256 /* Start PHY polling now.
1258 if (dev
->phy
.address
>= 0) {
1259 int link_poll_interval
;
1260 if (dev
->phy
.def
->ops
->poll_link(&dev
->phy
)) {
1261 dev
->phy
.def
->ops
->read_link(&dev
->phy
);
1262 emac_rx_clk_default(dev
);
1263 netif_carrier_on(dev
->ndev
);
1264 link_poll_interval
= PHY_POLL_LINK_ON
;
1266 emac_rx_clk_tx(dev
);
1267 netif_carrier_off(dev
->ndev
);
1268 link_poll_interval
= PHY_POLL_LINK_OFF
;
1270 dev
->link_polling
= 1;
1272 schedule_delayed_work(&dev
->link_work
, link_poll_interval
);
1273 emac_print_link_status(dev
);
1275 netif_carrier_on(dev
->ndev
);
1277 /* Required for Pause packet support in EMAC */
1278 dev_mc_add_global(ndev
, default_mcast_addr
);
1280 emac_configure(dev
);
1281 mal_poll_add(dev
->mal
, &dev
->commac
);
1282 mal_enable_tx_channel(dev
->mal
, dev
->mal_tx_chan
);
1283 mal_set_rcbs(dev
->mal
, dev
->mal_rx_chan
, emac_rx_size(ndev
->mtu
));
1284 mal_enable_rx_channel(dev
->mal
, dev
->mal_rx_chan
);
1285 emac_tx_enable(dev
);
1286 emac_rx_enable(dev
);
1287 emac_netif_start(dev
);
1289 mutex_unlock(&dev
->link_lock
);
1293 emac_clean_rx_ring(dev
);
1294 free_irq(dev
->emac_irq
, dev
);
1301 static int emac_link_differs(struct emac_instance
*dev
)
1303 u32 r
= in_be32(&dev
->emacp
->mr1
);
1305 int duplex
= r
& EMAC_MR1_FDE
? DUPLEX_FULL
: DUPLEX_HALF
;
1306 int speed
, pause
, asym_pause
;
1308 if (r
& EMAC_MR1_MF_1000
)
1310 else if (r
& EMAC_MR1_MF_100
)
1315 switch (r
& (EMAC_MR1_EIFC
| EMAC_MR1_APP
)) {
1316 case (EMAC_MR1_EIFC
| EMAC_MR1_APP
):
1325 pause
= asym_pause
= 0;
1327 return speed
!= dev
->phy
.speed
|| duplex
!= dev
->phy
.duplex
||
1328 pause
!= dev
->phy
.pause
|| asym_pause
!= dev
->phy
.asym_pause
;
1332 static void emac_link_timer(struct work_struct
*work
)
1334 struct emac_instance
*dev
=
1335 container_of(to_delayed_work(work
),
1336 struct emac_instance
, link_work
);
1337 int link_poll_interval
;
1339 mutex_lock(&dev
->link_lock
);
1340 DBG2(dev
, "link timer" NL
);
1345 if (dev
->phy
.def
->ops
->poll_link(&dev
->phy
)) {
1346 if (!netif_carrier_ok(dev
->ndev
)) {
1347 emac_rx_clk_default(dev
);
1348 /* Get new link parameters */
1349 dev
->phy
.def
->ops
->read_link(&dev
->phy
);
1351 netif_carrier_on(dev
->ndev
);
1352 emac_netif_stop(dev
);
1353 emac_full_tx_reset(dev
);
1354 emac_netif_start(dev
);
1355 emac_print_link_status(dev
);
1357 link_poll_interval
= PHY_POLL_LINK_ON
;
1359 if (netif_carrier_ok(dev
->ndev
)) {
1360 emac_rx_clk_tx(dev
);
1361 netif_carrier_off(dev
->ndev
);
1362 netif_tx_disable(dev
->ndev
);
1363 emac_reinitialize(dev
);
1364 emac_print_link_status(dev
);
1366 link_poll_interval
= PHY_POLL_LINK_OFF
;
1368 schedule_delayed_work(&dev
->link_work
, link_poll_interval
);
1370 mutex_unlock(&dev
->link_lock
);
1373 static void emac_force_link_update(struct emac_instance
*dev
)
1375 netif_carrier_off(dev
->ndev
);
1377 if (dev
->link_polling
) {
1378 cancel_delayed_work_sync(&dev
->link_work
);
1379 if (dev
->link_polling
)
1380 schedule_delayed_work(&dev
->link_work
, PHY_POLL_LINK_OFF
);
1384 /* Process ctx, rtnl_lock semaphore */
1385 static int emac_close(struct net_device
*ndev
)
1387 struct emac_instance
*dev
= netdev_priv(ndev
);
1389 DBG(dev
, "close" NL
);
1391 if (dev
->phy
.address
>= 0) {
1392 dev
->link_polling
= 0;
1393 cancel_delayed_work_sync(&dev
->link_work
);
1395 mutex_lock(&dev
->link_lock
);
1396 emac_netif_stop(dev
);
1398 mutex_unlock(&dev
->link_lock
);
1400 emac_rx_disable(dev
);
1401 emac_tx_disable(dev
);
1402 mal_disable_rx_channel(dev
->mal
, dev
->mal_rx_chan
);
1403 mal_disable_tx_channel(dev
->mal
, dev
->mal_tx_chan
);
1404 mal_poll_del(dev
->mal
, &dev
->commac
);
1406 emac_clean_tx_ring(dev
);
1407 emac_clean_rx_ring(dev
);
1409 free_irq(dev
->emac_irq
, dev
);
1411 netif_carrier_off(ndev
);
1416 static inline u16
emac_tx_csum(struct emac_instance
*dev
,
1417 struct sk_buff
*skb
)
1419 if (emac_has_feature(dev
, EMAC_FTR_HAS_TAH
) &&
1420 (skb
->ip_summed
== CHECKSUM_PARTIAL
)) {
1421 ++dev
->stats
.tx_packets_csum
;
1422 return EMAC_TX_CTRL_TAH_CSUM
;
1427 static inline netdev_tx_t
emac_xmit_finish(struct emac_instance
*dev
, int len
)
1429 struct emac_regs __iomem
*p
= dev
->emacp
;
1430 struct net_device
*ndev
= dev
->ndev
;
1432 /* Send the packet out. If the if makes a significant perf
1433 * difference, then we can store the TMR0 value in "dev"
1436 if (emac_has_feature(dev
, EMAC_FTR_EMAC4
))
1437 out_be32(&p
->tmr0
, EMAC4_TMR0_XMIT
);
1439 out_be32(&p
->tmr0
, EMAC_TMR0_XMIT
);
1441 if (unlikely(++dev
->tx_cnt
== NUM_TX_BUFF
)) {
1442 netif_stop_queue(ndev
);
1443 DBG2(dev
, "stopped TX queue" NL
);
1446 netif_trans_update(ndev
);
1447 ++dev
->stats
.tx_packets
;
1448 dev
->stats
.tx_bytes
+= len
;
1450 return NETDEV_TX_OK
;
1454 static netdev_tx_t
emac_start_xmit(struct sk_buff
*skb
, struct net_device
*ndev
)
1456 struct emac_instance
*dev
= netdev_priv(ndev
);
1457 unsigned int len
= skb
->len
;
1460 u16 ctrl
= EMAC_TX_CTRL_GFCS
| EMAC_TX_CTRL_GP
| MAL_TX_CTRL_READY
|
1461 MAL_TX_CTRL_LAST
| emac_tx_csum(dev
, skb
);
1463 slot
= dev
->tx_slot
++;
1464 if (dev
->tx_slot
== NUM_TX_BUFF
) {
1466 ctrl
|= MAL_TX_CTRL_WRAP
;
1469 DBG2(dev
, "xmit(%u) %d" NL
, len
, slot
);
1471 dev
->tx_skb
[slot
] = skb
;
1472 dev
->tx_desc
[slot
].data_ptr
= dma_map_single(&dev
->ofdev
->dev
,
1475 dev
->tx_desc
[slot
].data_len
= (u16
) len
;
1477 dev
->tx_desc
[slot
].ctrl
= ctrl
;
1479 return emac_xmit_finish(dev
, len
);
1482 static inline int emac_xmit_split(struct emac_instance
*dev
, int slot
,
1483 u32 pd
, int len
, int last
, u16 base_ctrl
)
1486 u16 ctrl
= base_ctrl
;
1487 int chunk
= min(len
, MAL_MAX_TX_SIZE
);
1490 slot
= (slot
+ 1) % NUM_TX_BUFF
;
1493 ctrl
|= MAL_TX_CTRL_LAST
;
1494 if (slot
== NUM_TX_BUFF
- 1)
1495 ctrl
|= MAL_TX_CTRL_WRAP
;
1497 dev
->tx_skb
[slot
] = NULL
;
1498 dev
->tx_desc
[slot
].data_ptr
= pd
;
1499 dev
->tx_desc
[slot
].data_len
= (u16
) chunk
;
1500 dev
->tx_desc
[slot
].ctrl
= ctrl
;
1511 /* Tx lock BH disabled (SG version for TAH equipped EMACs) */
1513 emac_start_xmit_sg(struct sk_buff
*skb
, struct net_device
*ndev
)
1515 struct emac_instance
*dev
= netdev_priv(ndev
);
1516 int nr_frags
= skb_shinfo(skb
)->nr_frags
;
1517 int len
= skb
->len
, chunk
;
1522 /* This is common "fast" path */
1523 if (likely(!nr_frags
&& len
<= MAL_MAX_TX_SIZE
))
1524 return emac_start_xmit(skb
, ndev
);
1526 len
-= skb
->data_len
;
1528 /* Note, this is only an *estimation*, we can still run out of empty
1529 * slots because of the additional fragmentation into
1530 * MAL_MAX_TX_SIZE-sized chunks
1532 if (unlikely(dev
->tx_cnt
+ nr_frags
+ mal_tx_chunks(len
) > NUM_TX_BUFF
))
1535 ctrl
= EMAC_TX_CTRL_GFCS
| EMAC_TX_CTRL_GP
| MAL_TX_CTRL_READY
|
1536 emac_tx_csum(dev
, skb
);
1537 slot
= dev
->tx_slot
;
1540 dev
->tx_skb
[slot
] = NULL
;
1541 chunk
= min(len
, MAL_MAX_TX_SIZE
);
1542 dev
->tx_desc
[slot
].data_ptr
= pd
=
1543 dma_map_single(&dev
->ofdev
->dev
, skb
->data
, len
, DMA_TO_DEVICE
);
1544 dev
->tx_desc
[slot
].data_len
= (u16
) chunk
;
1547 slot
= emac_xmit_split(dev
, slot
, pd
+ chunk
, len
, !nr_frags
,
1550 for (i
= 0; i
< nr_frags
; ++i
) {
1551 skb_frag_t
*frag
= &skb_shinfo(skb
)->frags
[i
];
1552 len
= skb_frag_size(frag
);
1554 if (unlikely(dev
->tx_cnt
+ mal_tx_chunks(len
) >= NUM_TX_BUFF
))
1557 pd
= skb_frag_dma_map(&dev
->ofdev
->dev
, frag
, 0, len
,
1560 slot
= emac_xmit_split(dev
, slot
, pd
, len
, i
== nr_frags
- 1,
1564 DBG2(dev
, "xmit_sg(%u) %d - %d" NL
, skb
->len
, dev
->tx_slot
, slot
);
1566 /* Attach skb to the last slot so we don't release it too early */
1567 dev
->tx_skb
[slot
] = skb
;
1569 /* Send the packet out */
1570 if (dev
->tx_slot
== NUM_TX_BUFF
- 1)
1571 ctrl
|= MAL_TX_CTRL_WRAP
;
1573 dev
->tx_desc
[dev
->tx_slot
].ctrl
= ctrl
;
1574 dev
->tx_slot
= (slot
+ 1) % NUM_TX_BUFF
;
1576 return emac_xmit_finish(dev
, skb
->len
);
1579 /* Well, too bad. Our previous estimation was overly optimistic.
1582 while (slot
!= dev
->tx_slot
) {
1583 dev
->tx_desc
[slot
].ctrl
= 0;
1586 slot
= NUM_TX_BUFF
- 1;
1588 ++dev
->estats
.tx_undo
;
1591 netif_stop_queue(ndev
);
1592 DBG2(dev
, "stopped TX queue" NL
);
1593 return NETDEV_TX_BUSY
;
1597 static void emac_parse_tx_error(struct emac_instance
*dev
, u16 ctrl
)
1599 struct emac_error_stats
*st
= &dev
->estats
;
1601 DBG(dev
, "BD TX error %04x" NL
, ctrl
);
1604 if (ctrl
& EMAC_TX_ST_BFCS
)
1605 ++st
->tx_bd_bad_fcs
;
1606 if (ctrl
& EMAC_TX_ST_LCS
)
1607 ++st
->tx_bd_carrier_loss
;
1608 if (ctrl
& EMAC_TX_ST_ED
)
1609 ++st
->tx_bd_excessive_deferral
;
1610 if (ctrl
& EMAC_TX_ST_EC
)
1611 ++st
->tx_bd_excessive_collisions
;
1612 if (ctrl
& EMAC_TX_ST_LC
)
1613 ++st
->tx_bd_late_collision
;
1614 if (ctrl
& EMAC_TX_ST_MC
)
1615 ++st
->tx_bd_multple_collisions
;
1616 if (ctrl
& EMAC_TX_ST_SC
)
1617 ++st
->tx_bd_single_collision
;
1618 if (ctrl
& EMAC_TX_ST_UR
)
1619 ++st
->tx_bd_underrun
;
1620 if (ctrl
& EMAC_TX_ST_SQE
)
1624 static void emac_poll_tx(void *param
)
1626 struct emac_instance
*dev
= param
;
1629 DBG2(dev
, "poll_tx, %d %d" NL
, dev
->tx_cnt
, dev
->ack_slot
);
1631 if (emac_has_feature(dev
, EMAC_FTR_HAS_TAH
))
1632 bad_mask
= EMAC_IS_BAD_TX_TAH
;
1634 bad_mask
= EMAC_IS_BAD_TX
;
1636 netif_tx_lock_bh(dev
->ndev
);
1639 int slot
= dev
->ack_slot
, n
= 0;
1641 ctrl
= dev
->tx_desc
[slot
].ctrl
;
1642 if (!(ctrl
& MAL_TX_CTRL_READY
)) {
1643 struct sk_buff
*skb
= dev
->tx_skb
[slot
];
1648 dev
->tx_skb
[slot
] = NULL
;
1650 slot
= (slot
+ 1) % NUM_TX_BUFF
;
1652 if (unlikely(ctrl
& bad_mask
))
1653 emac_parse_tx_error(dev
, ctrl
);
1659 dev
->ack_slot
= slot
;
1660 if (netif_queue_stopped(dev
->ndev
) &&
1661 dev
->tx_cnt
< EMAC_TX_WAKEUP_THRESH
)
1662 netif_wake_queue(dev
->ndev
);
1664 DBG2(dev
, "tx %d pkts" NL
, n
);
1667 netif_tx_unlock_bh(dev
->ndev
);
1670 static inline void emac_recycle_rx_skb(struct emac_instance
*dev
, int slot
,
1673 struct sk_buff
*skb
= dev
->rx_skb
[slot
];
1675 DBG2(dev
, "recycle %d %d" NL
, slot
, len
);
1678 dma_map_single(&dev
->ofdev
->dev
, skb
->data
- NET_IP_ALIGN
,
1679 SKB_DATA_ALIGN(len
+ NET_IP_ALIGN
),
1682 dev
->rx_desc
[slot
].data_len
= 0;
1684 dev
->rx_desc
[slot
].ctrl
= MAL_RX_CTRL_EMPTY
|
1685 (slot
== (NUM_RX_BUFF
- 1) ? MAL_RX_CTRL_WRAP
: 0);
1688 static void emac_parse_rx_error(struct emac_instance
*dev
, u16 ctrl
)
1690 struct emac_error_stats
*st
= &dev
->estats
;
1692 DBG(dev
, "BD RX error %04x" NL
, ctrl
);
1695 if (ctrl
& EMAC_RX_ST_OE
)
1696 ++st
->rx_bd_overrun
;
1697 if (ctrl
& EMAC_RX_ST_BP
)
1698 ++st
->rx_bd_bad_packet
;
1699 if (ctrl
& EMAC_RX_ST_RP
)
1700 ++st
->rx_bd_runt_packet
;
1701 if (ctrl
& EMAC_RX_ST_SE
)
1702 ++st
->rx_bd_short_event
;
1703 if (ctrl
& EMAC_RX_ST_AE
)
1704 ++st
->rx_bd_alignment_error
;
1705 if (ctrl
& EMAC_RX_ST_BFCS
)
1706 ++st
->rx_bd_bad_fcs
;
1707 if (ctrl
& EMAC_RX_ST_PTL
)
1708 ++st
->rx_bd_packet_too_long
;
1709 if (ctrl
& EMAC_RX_ST_ORE
)
1710 ++st
->rx_bd_out_of_range
;
1711 if (ctrl
& EMAC_RX_ST_IRE
)
1712 ++st
->rx_bd_in_range
;
1715 static inline void emac_rx_csum(struct emac_instance
*dev
,
1716 struct sk_buff
*skb
, u16 ctrl
)
1718 #ifdef CONFIG_IBM_EMAC_TAH
1719 if (!ctrl
&& dev
->tah_dev
) {
1720 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1721 ++dev
->stats
.rx_packets_csum
;
1726 static inline int emac_rx_sg_append(struct emac_instance
*dev
, int slot
)
1728 if (likely(dev
->rx_sg_skb
!= NULL
)) {
1729 int len
= dev
->rx_desc
[slot
].data_len
;
1730 int tot_len
= dev
->rx_sg_skb
->len
+ len
;
1732 if (unlikely(tot_len
+ NET_IP_ALIGN
> dev
->rx_skb_size
)) {
1733 ++dev
->estats
.rx_dropped_mtu
;
1734 dev_kfree_skb(dev
->rx_sg_skb
);
1735 dev
->rx_sg_skb
= NULL
;
1737 memcpy(skb_tail_pointer(dev
->rx_sg_skb
),
1738 dev
->rx_skb
[slot
]->data
, len
);
1739 skb_put(dev
->rx_sg_skb
, len
);
1740 emac_recycle_rx_skb(dev
, slot
, len
);
1744 emac_recycle_rx_skb(dev
, slot
, 0);
1748 /* NAPI poll context */
1749 static int emac_poll_rx(void *param
, int budget
)
1751 struct emac_instance
*dev
= param
;
1752 int slot
= dev
->rx_slot
, received
= 0;
1754 DBG2(dev
, "poll_rx(%d)" NL
, budget
);
1757 while (budget
> 0) {
1759 struct sk_buff
*skb
;
1760 u16 ctrl
= dev
->rx_desc
[slot
].ctrl
;
1762 if (ctrl
& MAL_RX_CTRL_EMPTY
)
1765 skb
= dev
->rx_skb
[slot
];
1767 len
= dev
->rx_desc
[slot
].data_len
;
1769 if (unlikely(!MAL_IS_SINGLE_RX(ctrl
)))
1772 ctrl
&= EMAC_BAD_RX_MASK
;
1773 if (unlikely(ctrl
&& ctrl
!= EMAC_RX_TAH_BAD_CSUM
)) {
1774 emac_parse_rx_error(dev
, ctrl
);
1775 ++dev
->estats
.rx_dropped_error
;
1776 emac_recycle_rx_skb(dev
, slot
, 0);
1781 if (len
< ETH_HLEN
) {
1782 ++dev
->estats
.rx_dropped_stack
;
1783 emac_recycle_rx_skb(dev
, slot
, len
);
1787 if (len
&& len
< EMAC_RX_COPY_THRESH
) {
1788 struct sk_buff
*copy_skb
;
1790 copy_skb
= napi_alloc_skb(&dev
->mal
->napi
, len
);
1791 if (unlikely(!copy_skb
))
1794 memcpy(copy_skb
->data
- NET_IP_ALIGN
,
1795 skb
->data
- NET_IP_ALIGN
,
1796 len
+ NET_IP_ALIGN
);
1797 emac_recycle_rx_skb(dev
, slot
, len
);
1799 } else if (unlikely(emac_alloc_rx_skb_napi(dev
, slot
)))
1804 skb
->protocol
= eth_type_trans(skb
, dev
->ndev
);
1805 emac_rx_csum(dev
, skb
, ctrl
);
1807 if (unlikely(netif_receive_skb(skb
) == NET_RX_DROP
))
1808 ++dev
->estats
.rx_dropped_stack
;
1810 ++dev
->stats
.rx_packets
;
1812 dev
->stats
.rx_bytes
+= len
;
1813 slot
= (slot
+ 1) % NUM_RX_BUFF
;
1818 if (ctrl
& MAL_RX_CTRL_FIRST
) {
1819 BUG_ON(dev
->rx_sg_skb
);
1820 if (unlikely(emac_alloc_rx_skb_napi(dev
, slot
))) {
1821 DBG(dev
, "rx OOM %d" NL
, slot
);
1822 ++dev
->estats
.rx_dropped_oom
;
1823 emac_recycle_rx_skb(dev
, slot
, 0);
1825 dev
->rx_sg_skb
= skb
;
1828 } else if (!emac_rx_sg_append(dev
, slot
) &&
1829 (ctrl
& MAL_RX_CTRL_LAST
)) {
1831 skb
= dev
->rx_sg_skb
;
1832 dev
->rx_sg_skb
= NULL
;
1834 ctrl
&= EMAC_BAD_RX_MASK
;
1835 if (unlikely(ctrl
&& ctrl
!= EMAC_RX_TAH_BAD_CSUM
)) {
1836 emac_parse_rx_error(dev
, ctrl
);
1837 ++dev
->estats
.rx_dropped_error
;
1845 DBG(dev
, "rx OOM %d" NL
, slot
);
1846 /* Drop the packet and recycle skb */
1847 ++dev
->estats
.rx_dropped_oom
;
1848 emac_recycle_rx_skb(dev
, slot
, 0);
1853 DBG2(dev
, "rx %d BDs" NL
, received
);
1854 dev
->rx_slot
= slot
;
1857 if (unlikely(budget
&& test_bit(MAL_COMMAC_RX_STOPPED
, &dev
->commac
.flags
))) {
1859 if (!(dev
->rx_desc
[slot
].ctrl
& MAL_RX_CTRL_EMPTY
)) {
1860 DBG2(dev
, "rx restart" NL
);
1865 if (dev
->rx_sg_skb
) {
1866 DBG2(dev
, "dropping partial rx packet" NL
);
1867 ++dev
->estats
.rx_dropped_error
;
1868 dev_kfree_skb(dev
->rx_sg_skb
);
1869 dev
->rx_sg_skb
= NULL
;
1872 clear_bit(MAL_COMMAC_RX_STOPPED
, &dev
->commac
.flags
);
1873 mal_enable_rx_channel(dev
->mal
, dev
->mal_rx_chan
);
1874 emac_rx_enable(dev
);
1880 /* NAPI poll context */
1881 static int emac_peek_rx(void *param
)
1883 struct emac_instance
*dev
= param
;
1885 return !(dev
->rx_desc
[dev
->rx_slot
].ctrl
& MAL_RX_CTRL_EMPTY
);
1888 /* NAPI poll context */
1889 static int emac_peek_rx_sg(void *param
)
1891 struct emac_instance
*dev
= param
;
1893 int slot
= dev
->rx_slot
;
1895 u16 ctrl
= dev
->rx_desc
[slot
].ctrl
;
1896 if (ctrl
& MAL_RX_CTRL_EMPTY
)
1898 else if (ctrl
& MAL_RX_CTRL_LAST
)
1901 slot
= (slot
+ 1) % NUM_RX_BUFF
;
1903 /* I'm just being paranoid here :) */
1904 if (unlikely(slot
== dev
->rx_slot
))
1910 static void emac_rxde(void *param
)
1912 struct emac_instance
*dev
= param
;
1914 ++dev
->estats
.rx_stopped
;
1915 emac_rx_disable_async(dev
);
1919 static irqreturn_t
emac_irq(int irq
, void *dev_instance
)
1921 struct emac_instance
*dev
= dev_instance
;
1922 struct emac_regs __iomem
*p
= dev
->emacp
;
1923 struct emac_error_stats
*st
= &dev
->estats
;
1926 spin_lock(&dev
->lock
);
1928 isr
= in_be32(&p
->isr
);
1929 out_be32(&p
->isr
, isr
);
1931 DBG(dev
, "isr = %08x" NL
, isr
);
1933 if (isr
& EMAC4_ISR_TXPE
)
1935 if (isr
& EMAC4_ISR_RXPE
)
1937 if (isr
& EMAC4_ISR_TXUE
)
1939 if (isr
& EMAC4_ISR_RXOE
)
1940 ++st
->rx_fifo_overrun
;
1941 if (isr
& EMAC_ISR_OVR
)
1943 if (isr
& EMAC_ISR_BP
)
1944 ++st
->rx_bad_packet
;
1945 if (isr
& EMAC_ISR_RP
)
1946 ++st
->rx_runt_packet
;
1947 if (isr
& EMAC_ISR_SE
)
1948 ++st
->rx_short_event
;
1949 if (isr
& EMAC_ISR_ALE
)
1950 ++st
->rx_alignment_error
;
1951 if (isr
& EMAC_ISR_BFCS
)
1953 if (isr
& EMAC_ISR_PTLE
)
1954 ++st
->rx_packet_too_long
;
1955 if (isr
& EMAC_ISR_ORE
)
1956 ++st
->rx_out_of_range
;
1957 if (isr
& EMAC_ISR_IRE
)
1959 if (isr
& EMAC_ISR_SQE
)
1961 if (isr
& EMAC_ISR_TE
)
1964 spin_unlock(&dev
->lock
);
1969 static struct net_device_stats
*emac_stats(struct net_device
*ndev
)
1971 struct emac_instance
*dev
= netdev_priv(ndev
);
1972 struct emac_stats
*st
= &dev
->stats
;
1973 struct emac_error_stats
*est
= &dev
->estats
;
1974 struct net_device_stats
*nst
= &ndev
->stats
;
1975 unsigned long flags
;
1977 DBG2(dev
, "stats" NL
);
1979 /* Compute "legacy" statistics */
1980 spin_lock_irqsave(&dev
->lock
, flags
);
1981 nst
->rx_packets
= (unsigned long)st
->rx_packets
;
1982 nst
->rx_bytes
= (unsigned long)st
->rx_bytes
;
1983 nst
->tx_packets
= (unsigned long)st
->tx_packets
;
1984 nst
->tx_bytes
= (unsigned long)st
->tx_bytes
;
1985 nst
->rx_dropped
= (unsigned long)(est
->rx_dropped_oom
+
1986 est
->rx_dropped_error
+
1987 est
->rx_dropped_resize
+
1988 est
->rx_dropped_mtu
);
1989 nst
->tx_dropped
= (unsigned long)est
->tx_dropped
;
1991 nst
->rx_errors
= (unsigned long)est
->rx_bd_errors
;
1992 nst
->rx_fifo_errors
= (unsigned long)(est
->rx_bd_overrun
+
1993 est
->rx_fifo_overrun
+
1995 nst
->rx_frame_errors
= (unsigned long)(est
->rx_bd_alignment_error
+
1996 est
->rx_alignment_error
);
1997 nst
->rx_crc_errors
= (unsigned long)(est
->rx_bd_bad_fcs
+
1999 nst
->rx_length_errors
= (unsigned long)(est
->rx_bd_runt_packet
+
2000 est
->rx_bd_short_event
+
2001 est
->rx_bd_packet_too_long
+
2002 est
->rx_bd_out_of_range
+
2003 est
->rx_bd_in_range
+
2004 est
->rx_runt_packet
+
2005 est
->rx_short_event
+
2006 est
->rx_packet_too_long
+
2007 est
->rx_out_of_range
+
2010 nst
->tx_errors
= (unsigned long)(est
->tx_bd_errors
+ est
->tx_errors
);
2011 nst
->tx_fifo_errors
= (unsigned long)(est
->tx_bd_underrun
+
2013 nst
->tx_carrier_errors
= (unsigned long)est
->tx_bd_carrier_loss
;
2014 nst
->collisions
= (unsigned long)(est
->tx_bd_excessive_deferral
+
2015 est
->tx_bd_excessive_collisions
+
2016 est
->tx_bd_late_collision
+
2017 est
->tx_bd_multple_collisions
);
2018 spin_unlock_irqrestore(&dev
->lock
, flags
);
2022 static struct mal_commac_ops emac_commac_ops
= {
2023 .poll_tx
= &emac_poll_tx
,
2024 .poll_rx
= &emac_poll_rx
,
2025 .peek_rx
= &emac_peek_rx
,
2029 static struct mal_commac_ops emac_commac_sg_ops
= {
2030 .poll_tx
= &emac_poll_tx
,
2031 .poll_rx
= &emac_poll_rx
,
2032 .peek_rx
= &emac_peek_rx_sg
,
2036 /* Ethtool support */
2037 static int emac_ethtool_get_link_ksettings(struct net_device
*ndev
,
2038 struct ethtool_link_ksettings
*cmd
)
2040 struct emac_instance
*dev
= netdev_priv(ndev
);
2041 u32 supported
, advertising
;
2043 supported
= dev
->phy
.features
;
2044 cmd
->base
.port
= PORT_MII
;
2045 cmd
->base
.phy_address
= dev
->phy
.address
;
2047 mutex_lock(&dev
->link_lock
);
2048 advertising
= dev
->phy
.advertising
;
2049 cmd
->base
.autoneg
= dev
->phy
.autoneg
;
2050 cmd
->base
.speed
= dev
->phy
.speed
;
2051 cmd
->base
.duplex
= dev
->phy
.duplex
;
2052 mutex_unlock(&dev
->link_lock
);
2054 ethtool_convert_legacy_u32_to_link_mode(cmd
->link_modes
.supported
,
2056 ethtool_convert_legacy_u32_to_link_mode(cmd
->link_modes
.advertising
,
2063 emac_ethtool_set_link_ksettings(struct net_device
*ndev
,
2064 const struct ethtool_link_ksettings
*cmd
)
2066 struct emac_instance
*dev
= netdev_priv(ndev
);
2067 u32 f
= dev
->phy
.features
;
2070 ethtool_convert_link_mode_to_legacy_u32(&advertising
,
2071 cmd
->link_modes
.advertising
);
2073 DBG(dev
, "set_settings(%d, %d, %d, 0x%08x)" NL
,
2074 cmd
->base
.autoneg
, cmd
->base
.speed
, cmd
->base
.duplex
, advertising
);
2076 /* Basic sanity checks */
2077 if (dev
->phy
.address
< 0)
2079 if (cmd
->base
.autoneg
!= AUTONEG_ENABLE
&&
2080 cmd
->base
.autoneg
!= AUTONEG_DISABLE
)
2082 if (cmd
->base
.autoneg
== AUTONEG_ENABLE
&& advertising
== 0)
2084 if (cmd
->base
.duplex
!= DUPLEX_HALF
&& cmd
->base
.duplex
!= DUPLEX_FULL
)
2087 if (cmd
->base
.autoneg
== AUTONEG_DISABLE
) {
2088 switch (cmd
->base
.speed
) {
2090 if (cmd
->base
.duplex
== DUPLEX_HALF
&&
2091 !(f
& SUPPORTED_10baseT_Half
))
2093 if (cmd
->base
.duplex
== DUPLEX_FULL
&&
2094 !(f
& SUPPORTED_10baseT_Full
))
2098 if (cmd
->base
.duplex
== DUPLEX_HALF
&&
2099 !(f
& SUPPORTED_100baseT_Half
))
2101 if (cmd
->base
.duplex
== DUPLEX_FULL
&&
2102 !(f
& SUPPORTED_100baseT_Full
))
2106 if (cmd
->base
.duplex
== DUPLEX_HALF
&&
2107 !(f
& SUPPORTED_1000baseT_Half
))
2109 if (cmd
->base
.duplex
== DUPLEX_FULL
&&
2110 !(f
& SUPPORTED_1000baseT_Full
))
2117 mutex_lock(&dev
->link_lock
);
2118 dev
->phy
.def
->ops
->setup_forced(&dev
->phy
, cmd
->base
.speed
,
2120 mutex_unlock(&dev
->link_lock
);
2123 if (!(f
& SUPPORTED_Autoneg
))
2126 mutex_lock(&dev
->link_lock
);
2127 dev
->phy
.def
->ops
->setup_aneg(&dev
->phy
,
2129 (dev
->phy
.advertising
&
2131 ADVERTISED_Asym_Pause
)));
2132 mutex_unlock(&dev
->link_lock
);
2134 emac_force_link_update(dev
);
2139 static void emac_ethtool_get_ringparam(struct net_device
*ndev
,
2140 struct ethtool_ringparam
*rp
)
2142 rp
->rx_max_pending
= rp
->rx_pending
= NUM_RX_BUFF
;
2143 rp
->tx_max_pending
= rp
->tx_pending
= NUM_TX_BUFF
;
2146 static void emac_ethtool_get_pauseparam(struct net_device
*ndev
,
2147 struct ethtool_pauseparam
*pp
)
2149 struct emac_instance
*dev
= netdev_priv(ndev
);
2151 mutex_lock(&dev
->link_lock
);
2152 if ((dev
->phy
.features
& SUPPORTED_Autoneg
) &&
2153 (dev
->phy
.advertising
& (ADVERTISED_Pause
| ADVERTISED_Asym_Pause
)))
2156 if (dev
->phy
.duplex
== DUPLEX_FULL
) {
2158 pp
->rx_pause
= pp
->tx_pause
= 1;
2159 else if (dev
->phy
.asym_pause
)
2162 mutex_unlock(&dev
->link_lock
);
2165 static int emac_get_regs_len(struct emac_instance
*dev
)
2167 return sizeof(struct emac_ethtool_regs_subhdr
) +
2168 sizeof(struct emac_regs
);
2171 static int emac_ethtool_get_regs_len(struct net_device
*ndev
)
2173 struct emac_instance
*dev
= netdev_priv(ndev
);
2176 size
= sizeof(struct emac_ethtool_regs_hdr
) +
2177 emac_get_regs_len(dev
) + mal_get_regs_len(dev
->mal
);
2178 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
))
2179 size
+= zmii_get_regs_len(dev
->zmii_dev
);
2180 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
))
2181 size
+= rgmii_get_regs_len(dev
->rgmii_dev
);
2182 if (emac_has_feature(dev
, EMAC_FTR_HAS_TAH
))
2183 size
+= tah_get_regs_len(dev
->tah_dev
);
2188 static void *emac_dump_regs(struct emac_instance
*dev
, void *buf
)
2190 struct emac_ethtool_regs_subhdr
*hdr
= buf
;
2192 hdr
->index
= dev
->cell_index
;
2193 if (emac_has_feature(dev
, EMAC_FTR_EMAC4SYNC
)) {
2194 hdr
->version
= EMAC4SYNC_ETHTOOL_REGS_VER
;
2195 } else if (emac_has_feature(dev
, EMAC_FTR_EMAC4
)) {
2196 hdr
->version
= EMAC4_ETHTOOL_REGS_VER
;
2198 hdr
->version
= EMAC_ETHTOOL_REGS_VER
;
2200 memcpy_fromio(hdr
+ 1, dev
->emacp
, sizeof(struct emac_regs
));
2201 return (void *)(hdr
+ 1) + sizeof(struct emac_regs
);
2204 static void emac_ethtool_get_regs(struct net_device
*ndev
,
2205 struct ethtool_regs
*regs
, void *buf
)
2207 struct emac_instance
*dev
= netdev_priv(ndev
);
2208 struct emac_ethtool_regs_hdr
*hdr
= buf
;
2210 hdr
->components
= 0;
2213 buf
= mal_dump_regs(dev
->mal
, buf
);
2214 buf
= emac_dump_regs(dev
, buf
);
2215 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
)) {
2216 hdr
->components
|= EMAC_ETHTOOL_REGS_ZMII
;
2217 buf
= zmii_dump_regs(dev
->zmii_dev
, buf
);
2219 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
)) {
2220 hdr
->components
|= EMAC_ETHTOOL_REGS_RGMII
;
2221 buf
= rgmii_dump_regs(dev
->rgmii_dev
, buf
);
2223 if (emac_has_feature(dev
, EMAC_FTR_HAS_TAH
)) {
2224 hdr
->components
|= EMAC_ETHTOOL_REGS_TAH
;
2225 buf
= tah_dump_regs(dev
->tah_dev
, buf
);
2229 static int emac_ethtool_nway_reset(struct net_device
*ndev
)
2231 struct emac_instance
*dev
= netdev_priv(ndev
);
2234 DBG(dev
, "nway_reset" NL
);
2236 if (dev
->phy
.address
< 0)
2239 mutex_lock(&dev
->link_lock
);
2240 if (!dev
->phy
.autoneg
) {
2245 dev
->phy
.def
->ops
->setup_aneg(&dev
->phy
, dev
->phy
.advertising
);
2247 mutex_unlock(&dev
->link_lock
);
2248 emac_force_link_update(dev
);
2252 static int emac_ethtool_get_sset_count(struct net_device
*ndev
, int stringset
)
2254 if (stringset
== ETH_SS_STATS
)
2255 return EMAC_ETHTOOL_STATS_COUNT
;
2260 static void emac_ethtool_get_strings(struct net_device
*ndev
, u32 stringset
,
2263 if (stringset
== ETH_SS_STATS
)
2264 memcpy(buf
, &emac_stats_keys
, sizeof(emac_stats_keys
));
2267 static void emac_ethtool_get_ethtool_stats(struct net_device
*ndev
,
2268 struct ethtool_stats
*estats
,
2271 struct emac_instance
*dev
= netdev_priv(ndev
);
2273 memcpy(tmp_stats
, &dev
->stats
, sizeof(dev
->stats
));
2274 tmp_stats
+= sizeof(dev
->stats
) / sizeof(u64
);
2275 memcpy(tmp_stats
, &dev
->estats
, sizeof(dev
->estats
));
2278 static void emac_ethtool_get_drvinfo(struct net_device
*ndev
,
2279 struct ethtool_drvinfo
*info
)
2281 struct emac_instance
*dev
= netdev_priv(ndev
);
2283 strlcpy(info
->driver
, "ibm_emac", sizeof(info
->driver
));
2284 strlcpy(info
->version
, DRV_VERSION
, sizeof(info
->version
));
2285 snprintf(info
->bus_info
, sizeof(info
->bus_info
), "PPC 4xx EMAC-%d %pOF",
2286 dev
->cell_index
, dev
->ofdev
->dev
.of_node
);
2289 static const struct ethtool_ops emac_ethtool_ops
= {
2290 .get_drvinfo
= emac_ethtool_get_drvinfo
,
2292 .get_regs_len
= emac_ethtool_get_regs_len
,
2293 .get_regs
= emac_ethtool_get_regs
,
2295 .nway_reset
= emac_ethtool_nway_reset
,
2297 .get_ringparam
= emac_ethtool_get_ringparam
,
2298 .get_pauseparam
= emac_ethtool_get_pauseparam
,
2300 .get_strings
= emac_ethtool_get_strings
,
2301 .get_sset_count
= emac_ethtool_get_sset_count
,
2302 .get_ethtool_stats
= emac_ethtool_get_ethtool_stats
,
2304 .get_link
= ethtool_op_get_link
,
2305 .get_link_ksettings
= emac_ethtool_get_link_ksettings
,
2306 .set_link_ksettings
= emac_ethtool_set_link_ksettings
,
2309 static int emac_ioctl(struct net_device
*ndev
, struct ifreq
*rq
, int cmd
)
2311 struct emac_instance
*dev
= netdev_priv(ndev
);
2312 struct mii_ioctl_data
*data
= if_mii(rq
);
2314 DBG(dev
, "ioctl %08x" NL
, cmd
);
2316 if (dev
->phy
.address
< 0)
2321 data
->phy_id
= dev
->phy
.address
;
2324 data
->val_out
= emac_mdio_read(ndev
, dev
->phy
.address
,
2329 emac_mdio_write(ndev
, dev
->phy
.address
, data
->reg_num
,
2337 struct emac_depentry
{
2339 struct device_node
*node
;
2340 struct platform_device
*ofdev
;
2344 #define EMAC_DEP_MAL_IDX 0
2345 #define EMAC_DEP_ZMII_IDX 1
2346 #define EMAC_DEP_RGMII_IDX 2
2347 #define EMAC_DEP_TAH_IDX 3
2348 #define EMAC_DEP_MDIO_IDX 4
2349 #define EMAC_DEP_PREV_IDX 5
2350 #define EMAC_DEP_COUNT 6
2352 static int emac_check_deps(struct emac_instance
*dev
,
2353 struct emac_depentry
*deps
)
2356 struct device_node
*np
;
2358 for (i
= 0; i
< EMAC_DEP_COUNT
; i
++) {
2359 /* no dependency on that item, allright */
2360 if (deps
[i
].phandle
== 0) {
2364 /* special case for blist as the dependency might go away */
2365 if (i
== EMAC_DEP_PREV_IDX
) {
2366 np
= *(dev
->blist
- 1);
2368 deps
[i
].phandle
= 0;
2372 if (deps
[i
].node
== NULL
)
2373 deps
[i
].node
= of_node_get(np
);
2375 if (deps
[i
].node
== NULL
)
2376 deps
[i
].node
= of_find_node_by_phandle(deps
[i
].phandle
);
2377 if (deps
[i
].node
== NULL
)
2379 if (deps
[i
].ofdev
== NULL
)
2380 deps
[i
].ofdev
= of_find_device_by_node(deps
[i
].node
);
2381 if (deps
[i
].ofdev
== NULL
)
2383 if (deps
[i
].drvdata
== NULL
)
2384 deps
[i
].drvdata
= platform_get_drvdata(deps
[i
].ofdev
);
2385 if (deps
[i
].drvdata
!= NULL
)
2388 return there
== EMAC_DEP_COUNT
;
2391 static void emac_put_deps(struct emac_instance
*dev
)
2393 of_dev_put(dev
->mal_dev
);
2394 of_dev_put(dev
->zmii_dev
);
2395 of_dev_put(dev
->rgmii_dev
);
2396 of_dev_put(dev
->mdio_dev
);
2397 of_dev_put(dev
->tah_dev
);
2400 static int emac_of_bus_notify(struct notifier_block
*nb
, unsigned long action
,
2403 /* We are only intereted in device addition */
2404 if (action
== BUS_NOTIFY_BOUND_DRIVER
)
2405 wake_up_all(&emac_probe_wait
);
2409 static struct notifier_block emac_of_bus_notifier
= {
2410 .notifier_call
= emac_of_bus_notify
2413 static int emac_wait_deps(struct emac_instance
*dev
)
2415 struct emac_depentry deps
[EMAC_DEP_COUNT
];
2418 memset(&deps
, 0, sizeof(deps
));
2420 deps
[EMAC_DEP_MAL_IDX
].phandle
= dev
->mal_ph
;
2421 deps
[EMAC_DEP_ZMII_IDX
].phandle
= dev
->zmii_ph
;
2422 deps
[EMAC_DEP_RGMII_IDX
].phandle
= dev
->rgmii_ph
;
2424 deps
[EMAC_DEP_TAH_IDX
].phandle
= dev
->tah_ph
;
2426 deps
[EMAC_DEP_MDIO_IDX
].phandle
= dev
->mdio_ph
;
2427 if (dev
->blist
&& dev
->blist
> emac_boot_list
)
2428 deps
[EMAC_DEP_PREV_IDX
].phandle
= 0xffffffffu
;
2429 bus_register_notifier(&platform_bus_type
, &emac_of_bus_notifier
);
2430 wait_event_timeout(emac_probe_wait
,
2431 emac_check_deps(dev
, deps
),
2432 EMAC_PROBE_DEP_TIMEOUT
);
2433 bus_unregister_notifier(&platform_bus_type
, &emac_of_bus_notifier
);
2434 err
= emac_check_deps(dev
, deps
) ? 0 : -ENODEV
;
2435 for (i
= 0; i
< EMAC_DEP_COUNT
; i
++) {
2436 of_node_put(deps
[i
].node
);
2438 of_dev_put(deps
[i
].ofdev
);
2441 dev
->mal_dev
= deps
[EMAC_DEP_MAL_IDX
].ofdev
;
2442 dev
->zmii_dev
= deps
[EMAC_DEP_ZMII_IDX
].ofdev
;
2443 dev
->rgmii_dev
= deps
[EMAC_DEP_RGMII_IDX
].ofdev
;
2444 dev
->tah_dev
= deps
[EMAC_DEP_TAH_IDX
].ofdev
;
2445 dev
->mdio_dev
= deps
[EMAC_DEP_MDIO_IDX
].ofdev
;
2447 of_dev_put(deps
[EMAC_DEP_PREV_IDX
].ofdev
);
2451 static int emac_read_uint_prop(struct device_node
*np
, const char *name
,
2452 u32
*val
, int fatal
)
2455 const u32
*prop
= of_get_property(np
, name
, &len
);
2456 if (prop
== NULL
|| len
< sizeof(u32
)) {
2458 printk(KERN_ERR
"%pOF: missing %s property\n",
2466 static void emac_adjust_link(struct net_device
*ndev
)
2468 struct emac_instance
*dev
= netdev_priv(ndev
);
2469 struct phy_device
*phy
= dev
->phy_dev
;
2471 dev
->phy
.autoneg
= phy
->autoneg
;
2472 dev
->phy
.speed
= phy
->speed
;
2473 dev
->phy
.duplex
= phy
->duplex
;
2474 dev
->phy
.pause
= phy
->pause
;
2475 dev
->phy
.asym_pause
= phy
->asym_pause
;
2476 ethtool_convert_link_mode_to_legacy_u32(&dev
->phy
.advertising
,
2480 static int emac_mii_bus_read(struct mii_bus
*bus
, int addr
, int regnum
)
2482 int ret
= emac_mdio_read(bus
->priv
, addr
, regnum
);
2483 /* This is a workaround for powered down ports/phys.
2484 * In the wild, this was seen on the Cisco Meraki MX60(W).
2485 * This hardware disables ports as part of the handoff
2486 * procedure. Accessing the ports will lead to errors
2487 * (-ETIMEDOUT, -EREMOTEIO) that do more harm than good.
2489 return ret
< 0 ? 0xffff : ret
;
2492 static int emac_mii_bus_write(struct mii_bus
*bus
, int addr
,
2493 int regnum
, u16 val
)
2495 emac_mdio_write(bus
->priv
, addr
, regnum
, val
);
2499 static int emac_mii_bus_reset(struct mii_bus
*bus
)
2501 struct emac_instance
*dev
= netdev_priv(bus
->priv
);
2503 return emac_reset(dev
);
2506 static int emac_mdio_phy_start_aneg(struct mii_phy
*phy
,
2507 struct phy_device
*phy_dev
)
2509 phy_dev
->autoneg
= phy
->autoneg
;
2510 phy_dev
->speed
= phy
->speed
;
2511 phy_dev
->duplex
= phy
->duplex
;
2512 ethtool_convert_legacy_u32_to_link_mode(phy_dev
->advertising
,
2514 return phy_start_aneg(phy_dev
);
2517 static int emac_mdio_setup_aneg(struct mii_phy
*phy
, u32 advertise
)
2519 struct net_device
*ndev
= phy
->dev
;
2520 struct emac_instance
*dev
= netdev_priv(ndev
);
2522 phy
->autoneg
= AUTONEG_ENABLE
;
2523 phy
->advertising
= advertise
;
2524 return emac_mdio_phy_start_aneg(phy
, dev
->phy_dev
);
2527 static int emac_mdio_setup_forced(struct mii_phy
*phy
, int speed
, int fd
)
2529 struct net_device
*ndev
= phy
->dev
;
2530 struct emac_instance
*dev
= netdev_priv(ndev
);
2532 phy
->autoneg
= AUTONEG_DISABLE
;
2535 return emac_mdio_phy_start_aneg(phy
, dev
->phy_dev
);
2538 static int emac_mdio_poll_link(struct mii_phy
*phy
)
2540 struct net_device
*ndev
= phy
->dev
;
2541 struct emac_instance
*dev
= netdev_priv(ndev
);
2544 res
= phy_read_status(dev
->phy_dev
);
2546 dev_err(&dev
->ofdev
->dev
, "link update failed (%d).", res
);
2547 return ethtool_op_get_link(ndev
);
2550 return dev
->phy_dev
->link
;
2553 static int emac_mdio_read_link(struct mii_phy
*phy
)
2555 struct net_device
*ndev
= phy
->dev
;
2556 struct emac_instance
*dev
= netdev_priv(ndev
);
2557 struct phy_device
*phy_dev
= dev
->phy_dev
;
2560 res
= phy_read_status(phy_dev
);
2564 phy
->speed
= phy_dev
->speed
;
2565 phy
->duplex
= phy_dev
->duplex
;
2566 phy
->pause
= phy_dev
->pause
;
2567 phy
->asym_pause
= phy_dev
->asym_pause
;
2571 static int emac_mdio_init_phy(struct mii_phy
*phy
)
2573 struct net_device
*ndev
= phy
->dev
;
2574 struct emac_instance
*dev
= netdev_priv(ndev
);
2576 phy_start(dev
->phy_dev
);
2577 return phy_init_hw(dev
->phy_dev
);
2580 static const struct mii_phy_ops emac_dt_mdio_phy_ops
= {
2581 .init
= emac_mdio_init_phy
,
2582 .setup_aneg
= emac_mdio_setup_aneg
,
2583 .setup_forced
= emac_mdio_setup_forced
,
2584 .poll_link
= emac_mdio_poll_link
,
2585 .read_link
= emac_mdio_read_link
,
2588 static int emac_dt_mdio_probe(struct emac_instance
*dev
)
2590 struct device_node
*mii_np
;
2593 mii_np
= of_get_child_by_name(dev
->ofdev
->dev
.of_node
, "mdio");
2595 dev_err(&dev
->ofdev
->dev
, "no mdio definition found.");
2599 if (!of_device_is_available(mii_np
)) {
2604 dev
->mii_bus
= devm_mdiobus_alloc(&dev
->ofdev
->dev
);
2605 if (!dev
->mii_bus
) {
2610 dev
->mii_bus
->priv
= dev
->ndev
;
2611 dev
->mii_bus
->parent
= dev
->ndev
->dev
.parent
;
2612 dev
->mii_bus
->name
= "emac_mdio";
2613 dev
->mii_bus
->read
= &emac_mii_bus_read
;
2614 dev
->mii_bus
->write
= &emac_mii_bus_write
;
2615 dev
->mii_bus
->reset
= &emac_mii_bus_reset
;
2616 snprintf(dev
->mii_bus
->id
, MII_BUS_ID_SIZE
, "%s", dev
->ofdev
->name
);
2617 res
= of_mdiobus_register(dev
->mii_bus
, mii_np
);
2619 dev_err(&dev
->ofdev
->dev
, "cannot register MDIO bus %s (%d)",
2620 dev
->mii_bus
->name
, res
);
2624 of_node_put(mii_np
);
2628 static int emac_dt_phy_connect(struct emac_instance
*dev
,
2629 struct device_node
*phy_handle
)
2631 dev
->phy
.def
= devm_kzalloc(&dev
->ofdev
->dev
, sizeof(*dev
->phy
.def
),
2636 dev
->phy_dev
= of_phy_connect(dev
->ndev
, phy_handle
, &emac_adjust_link
,
2638 if (!dev
->phy_dev
) {
2639 dev_err(&dev
->ofdev
->dev
, "failed to connect to PHY.\n");
2643 dev
->phy
.def
->phy_id
= dev
->phy_dev
->drv
->phy_id
;
2644 dev
->phy
.def
->phy_id_mask
= dev
->phy_dev
->drv
->phy_id_mask
;
2645 dev
->phy
.def
->name
= dev
->phy_dev
->drv
->name
;
2646 dev
->phy
.def
->ops
= &emac_dt_mdio_phy_ops
;
2647 ethtool_convert_link_mode_to_legacy_u32(&dev
->phy
.features
,
2648 dev
->phy_dev
->supported
);
2649 dev
->phy
.address
= dev
->phy_dev
->mdio
.addr
;
2650 dev
->phy
.mode
= dev
->phy_dev
->interface
;
2654 static int emac_dt_phy_probe(struct emac_instance
*dev
)
2656 struct device_node
*np
= dev
->ofdev
->dev
.of_node
;
2657 struct device_node
*phy_handle
;
2660 phy_handle
= of_parse_phandle(np
, "phy-handle", 0);
2663 res
= emac_dt_mdio_probe(dev
);
2665 res
= emac_dt_phy_connect(dev
, phy_handle
);
2667 mdiobus_unregister(dev
->mii_bus
);
2671 of_node_put(phy_handle
);
2675 static int emac_init_phy(struct emac_instance
*dev
)
2677 struct device_node
*np
= dev
->ofdev
->dev
.of_node
;
2678 struct net_device
*ndev
= dev
->ndev
;
2682 dev
->phy
.dev
= ndev
;
2683 dev
->phy
.mode
= dev
->phy_mode
;
2685 /* PHY-less configuration. */
2686 if ((dev
->phy_address
== 0xffffffff && dev
->phy_map
== 0xffffffff) ||
2687 of_phy_is_fixed_link(np
)) {
2690 /* PHY-less configuration. */
2691 dev
->phy
.address
= -1;
2692 dev
->phy
.features
= SUPPORTED_MII
;
2693 if (emac_phy_supports_gige(dev
->phy_mode
))
2694 dev
->phy
.features
|= SUPPORTED_1000baseT_Full
;
2696 dev
->phy
.features
|= SUPPORTED_100baseT_Full
;
2699 if (of_phy_is_fixed_link(np
)) {
2700 int res
= emac_dt_mdio_probe(dev
);
2705 res
= of_phy_register_fixed_link(np
);
2706 dev
->phy_dev
= of_phy_find_device(np
);
2707 if (res
|| !dev
->phy_dev
) {
2708 mdiobus_unregister(dev
->mii_bus
);
2709 return res
? res
: -EINVAL
;
2711 emac_adjust_link(dev
->ndev
);
2712 put_device(&dev
->phy_dev
->mdio
.dev
);
2717 mutex_lock(&emac_phy_map_lock
);
2718 phy_map
= dev
->phy_map
| busy_phy_map
;
2720 DBG(dev
, "PHY maps %08x %08x" NL
, dev
->phy_map
, busy_phy_map
);
2722 dev
->phy
.mdio_read
= emac_mdio_read
;
2723 dev
->phy
.mdio_write
= emac_mdio_write
;
2725 /* Enable internal clock source */
2726 #ifdef CONFIG_PPC_DCR_NATIVE
2727 if (emac_has_feature(dev
, EMAC_FTR_440GX_PHY_CLK_FIX
))
2728 dcri_clrset(SDR0
, SDR0_MFR
, 0, SDR0_MFR_ECS
);
2730 /* PHY clock workaround */
2731 emac_rx_clk_tx(dev
);
2733 /* Enable internal clock source on 440GX*/
2734 #ifdef CONFIG_PPC_DCR_NATIVE
2735 if (emac_has_feature(dev
, EMAC_FTR_440GX_PHY_CLK_FIX
))
2736 dcri_clrset(SDR0
, SDR0_MFR
, 0, SDR0_MFR_ECS
);
2738 /* Configure EMAC with defaults so we can at least use MDIO
2739 * This is needed mostly for 440GX
2741 if (emac_phy_gpcs(dev
->phy
.mode
)) {
2743 * Make GPCS PHY address equal to EMAC index.
2744 * We probably should take into account busy_phy_map
2745 * and/or phy_map here.
2747 * Note that the busy_phy_map is currently global
2748 * while it should probably be per-ASIC...
2750 dev
->phy
.gpcs_address
= dev
->gpcs_address
;
2751 if (dev
->phy
.gpcs_address
== 0xffffffff)
2752 dev
->phy
.address
= dev
->cell_index
;
2755 emac_configure(dev
);
2757 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
)) {
2758 int res
= emac_dt_phy_probe(dev
);
2762 /* No phy-handle property configured.
2763 * Continue with the existing phy probe
2769 mutex_unlock(&emac_phy_map_lock
);
2773 mutex_unlock(&emac_phy_map_lock
);
2774 dev_err(&dev
->ofdev
->dev
, "failed to attach dt phy (%d).\n",
2780 if (dev
->phy_address
!= 0xffffffff)
2781 phy_map
= ~(1 << dev
->phy_address
);
2783 for (i
= 0; i
< 0x20; phy_map
>>= 1, ++i
)
2784 if (!(phy_map
& 1)) {
2786 busy_phy_map
|= 1 << i
;
2788 /* Quick check if there is a PHY at the address */
2789 r
= emac_mdio_read(dev
->ndev
, i
, MII_BMCR
);
2790 if (r
== 0xffff || r
< 0)
2792 if (!emac_mii_phy_probe(&dev
->phy
, i
))
2796 /* Enable external clock source */
2797 #ifdef CONFIG_PPC_DCR_NATIVE
2798 if (emac_has_feature(dev
, EMAC_FTR_440GX_PHY_CLK_FIX
))
2799 dcri_clrset(SDR0
, SDR0_MFR
, SDR0_MFR_ECS
, 0);
2801 mutex_unlock(&emac_phy_map_lock
);
2803 printk(KERN_WARNING
"%pOF: can't find PHY!\n", np
);
2809 if (dev
->phy
.def
->ops
->init
)
2810 dev
->phy
.def
->ops
->init(&dev
->phy
);
2812 /* Disable any PHY features not supported by the platform */
2813 dev
->phy
.def
->features
&= ~dev
->phy_feat_exc
;
2814 dev
->phy
.features
&= ~dev
->phy_feat_exc
;
2816 /* Setup initial link parameters */
2817 if (dev
->phy
.features
& SUPPORTED_Autoneg
) {
2818 adv
= dev
->phy
.features
;
2819 if (!emac_has_feature(dev
, EMAC_FTR_NO_FLOW_CONTROL_40x
))
2820 adv
|= ADVERTISED_Pause
| ADVERTISED_Asym_Pause
;
2821 /* Restart autonegotiation */
2822 dev
->phy
.def
->ops
->setup_aneg(&dev
->phy
, adv
);
2824 u32 f
= dev
->phy
.def
->features
;
2825 int speed
= SPEED_10
, fd
= DUPLEX_HALF
;
2827 /* Select highest supported speed/duplex */
2828 if (f
& SUPPORTED_1000baseT_Full
) {
2831 } else if (f
& SUPPORTED_1000baseT_Half
)
2833 else if (f
& SUPPORTED_100baseT_Full
) {
2836 } else if (f
& SUPPORTED_100baseT_Half
)
2838 else if (f
& SUPPORTED_10baseT_Full
)
2841 /* Force link parameters */
2842 dev
->phy
.def
->ops
->setup_forced(&dev
->phy
, speed
, fd
);
2847 static int emac_init_config(struct emac_instance
*dev
)
2849 struct device_node
*np
= dev
->ofdev
->dev
.of_node
;
2853 /* Read config from device-tree */
2854 if (emac_read_uint_prop(np
, "mal-device", &dev
->mal_ph
, 1))
2856 if (emac_read_uint_prop(np
, "mal-tx-channel", &dev
->mal_tx_chan
, 1))
2858 if (emac_read_uint_prop(np
, "mal-rx-channel", &dev
->mal_rx_chan
, 1))
2860 if (emac_read_uint_prop(np
, "cell-index", &dev
->cell_index
, 1))
2862 if (emac_read_uint_prop(np
, "max-frame-size", &dev
->max_mtu
, 0))
2863 dev
->max_mtu
= ETH_DATA_LEN
;
2864 if (emac_read_uint_prop(np
, "rx-fifo-size", &dev
->rx_fifo_size
, 0))
2865 dev
->rx_fifo_size
= 2048;
2866 if (emac_read_uint_prop(np
, "tx-fifo-size", &dev
->tx_fifo_size
, 0))
2867 dev
->tx_fifo_size
= 2048;
2868 if (emac_read_uint_prop(np
, "rx-fifo-size-gige", &dev
->rx_fifo_size_gige
, 0))
2869 dev
->rx_fifo_size_gige
= dev
->rx_fifo_size
;
2870 if (emac_read_uint_prop(np
, "tx-fifo-size-gige", &dev
->tx_fifo_size_gige
, 0))
2871 dev
->tx_fifo_size_gige
= dev
->tx_fifo_size
;
2872 if (emac_read_uint_prop(np
, "phy-address", &dev
->phy_address
, 0))
2873 dev
->phy_address
= 0xffffffff;
2874 if (emac_read_uint_prop(np
, "phy-map", &dev
->phy_map
, 0))
2875 dev
->phy_map
= 0xffffffff;
2876 if (emac_read_uint_prop(np
, "gpcs-address", &dev
->gpcs_address
, 0))
2877 dev
->gpcs_address
= 0xffffffff;
2878 if (emac_read_uint_prop(np
->parent
, "clock-frequency", &dev
->opb_bus_freq
, 1))
2880 if (emac_read_uint_prop(np
, "tah-device", &dev
->tah_ph
, 0))
2882 if (emac_read_uint_prop(np
, "tah-channel", &dev
->tah_port
, 0))
2884 if (emac_read_uint_prop(np
, "mdio-device", &dev
->mdio_ph
, 0))
2886 if (emac_read_uint_prop(np
, "zmii-device", &dev
->zmii_ph
, 0))
2888 if (emac_read_uint_prop(np
, "zmii-channel", &dev
->zmii_port
, 0))
2889 dev
->zmii_port
= 0xffffffff;
2890 if (emac_read_uint_prop(np
, "rgmii-device", &dev
->rgmii_ph
, 0))
2892 if (emac_read_uint_prop(np
, "rgmii-channel", &dev
->rgmii_port
, 0))
2893 dev
->rgmii_port
= 0xffffffff;
2894 if (emac_read_uint_prop(np
, "fifo-entry-size", &dev
->fifo_entry_size
, 0))
2895 dev
->fifo_entry_size
= 16;
2896 if (emac_read_uint_prop(np
, "mal-burst-size", &dev
->mal_burst_size
, 0))
2897 dev
->mal_burst_size
= 256;
2899 /* PHY mode needs some decoding */
2900 err
= of_get_phy_mode(np
, &dev
->phy_mode
);
2902 dev
->phy_mode
= PHY_INTERFACE_MODE_NA
;
2904 /* Check EMAC version */
2905 if (of_device_is_compatible(np
, "ibm,emac4sync")) {
2906 dev
->features
|= (EMAC_FTR_EMAC4
| EMAC_FTR_EMAC4SYNC
);
2907 if (of_device_is_compatible(np
, "ibm,emac-460ex") ||
2908 of_device_is_compatible(np
, "ibm,emac-460gt"))
2909 dev
->features
|= EMAC_FTR_460EX_PHY_CLK_FIX
;
2910 if (of_device_is_compatible(np
, "ibm,emac-405ex") ||
2911 of_device_is_compatible(np
, "ibm,emac-405exr"))
2912 dev
->features
|= EMAC_FTR_440EP_PHY_CLK_FIX
;
2913 if (of_device_is_compatible(np
, "ibm,emac-apm821xx")) {
2914 dev
->features
|= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE
|
2915 EMAC_FTR_APM821XX_NO_HALF_DUPLEX
|
2916 EMAC_FTR_460EX_PHY_CLK_FIX
);
2918 } else if (of_device_is_compatible(np
, "ibm,emac4")) {
2919 dev
->features
|= EMAC_FTR_EMAC4
;
2920 if (of_device_is_compatible(np
, "ibm,emac-440gx"))
2921 dev
->features
|= EMAC_FTR_440GX_PHY_CLK_FIX
;
2923 if (of_device_is_compatible(np
, "ibm,emac-440ep") ||
2924 of_device_is_compatible(np
, "ibm,emac-440gr"))
2925 dev
->features
|= EMAC_FTR_440EP_PHY_CLK_FIX
;
2926 if (of_device_is_compatible(np
, "ibm,emac-405ez")) {
2927 #ifdef CONFIG_IBM_EMAC_NO_FLOW_CTRL
2928 dev
->features
|= EMAC_FTR_NO_FLOW_CONTROL_40x
;
2930 printk(KERN_ERR
"%pOF: Flow control not disabled!\n",
2938 /* Fixup some feature bits based on the device tree */
2939 if (of_get_property(np
, "has-inverted-stacr-oc", NULL
))
2940 dev
->features
|= EMAC_FTR_STACR_OC_INVERT
;
2941 if (of_get_property(np
, "has-new-stacr-staopc", NULL
))
2942 dev
->features
|= EMAC_FTR_HAS_NEW_STACR
;
2944 /* CAB lacks the appropriate properties */
2945 if (of_device_is_compatible(np
, "ibm,emac-axon"))
2946 dev
->features
|= EMAC_FTR_HAS_NEW_STACR
|
2947 EMAC_FTR_STACR_OC_INVERT
;
2949 /* Enable TAH/ZMII/RGMII features as found */
2950 if (dev
->tah_ph
!= 0) {
2951 #ifdef CONFIG_IBM_EMAC_TAH
2952 dev
->features
|= EMAC_FTR_HAS_TAH
;
2954 printk(KERN_ERR
"%pOF: TAH support not enabled !\n", np
);
2959 if (dev
->zmii_ph
!= 0) {
2960 #ifdef CONFIG_IBM_EMAC_ZMII
2961 dev
->features
|= EMAC_FTR_HAS_ZMII
;
2963 printk(KERN_ERR
"%pOF: ZMII support not enabled !\n", np
);
2968 if (dev
->rgmii_ph
!= 0) {
2969 #ifdef CONFIG_IBM_EMAC_RGMII
2970 dev
->features
|= EMAC_FTR_HAS_RGMII
;
2972 printk(KERN_ERR
"%pOF: RGMII support not enabled !\n", np
);
2977 /* Read MAC-address */
2978 p
= of_get_property(np
, "local-mac-address", NULL
);
2980 printk(KERN_ERR
"%pOF: Can't find local-mac-address property\n",
2984 memcpy(dev
->ndev
->dev_addr
, p
, ETH_ALEN
);
2986 /* IAHT and GAHT filter parameterization */
2987 if (emac_has_feature(dev
, EMAC_FTR_EMAC4SYNC
)) {
2988 dev
->xaht_slots_shift
= EMAC4SYNC_XAHT_SLOTS_SHIFT
;
2989 dev
->xaht_width_shift
= EMAC4SYNC_XAHT_WIDTH_SHIFT
;
2991 dev
->xaht_slots_shift
= EMAC4_XAHT_SLOTS_SHIFT
;
2992 dev
->xaht_width_shift
= EMAC4_XAHT_WIDTH_SHIFT
;
2995 /* This should never happen */
2996 if (WARN_ON(EMAC_XAHT_REGS(dev
) > EMAC_XAHT_MAX_REGS
))
2999 DBG(dev
, "features : 0x%08x / 0x%08x\n", dev
->features
, EMAC_FTRS_POSSIBLE
);
3000 DBG(dev
, "tx_fifo_size : %d (%d gige)\n", dev
->tx_fifo_size
, dev
->tx_fifo_size_gige
);
3001 DBG(dev
, "rx_fifo_size : %d (%d gige)\n", dev
->rx_fifo_size
, dev
->rx_fifo_size_gige
);
3002 DBG(dev
, "max_mtu : %d\n", dev
->max_mtu
);
3003 DBG(dev
, "OPB freq : %d\n", dev
->opb_bus_freq
);
3008 static const struct net_device_ops emac_netdev_ops
= {
3009 .ndo_open
= emac_open
,
3010 .ndo_stop
= emac_close
,
3011 .ndo_get_stats
= emac_stats
,
3012 .ndo_set_rx_mode
= emac_set_multicast_list
,
3013 .ndo_do_ioctl
= emac_ioctl
,
3014 .ndo_tx_timeout
= emac_tx_timeout
,
3015 .ndo_validate_addr
= eth_validate_addr
,
3016 .ndo_set_mac_address
= emac_set_mac_address
,
3017 .ndo_start_xmit
= emac_start_xmit
,
3020 static const struct net_device_ops emac_gige_netdev_ops
= {
3021 .ndo_open
= emac_open
,
3022 .ndo_stop
= emac_close
,
3023 .ndo_get_stats
= emac_stats
,
3024 .ndo_set_rx_mode
= emac_set_multicast_list
,
3025 .ndo_do_ioctl
= emac_ioctl
,
3026 .ndo_tx_timeout
= emac_tx_timeout
,
3027 .ndo_validate_addr
= eth_validate_addr
,
3028 .ndo_set_mac_address
= emac_set_mac_address
,
3029 .ndo_start_xmit
= emac_start_xmit_sg
,
3030 .ndo_change_mtu
= emac_change_mtu
,
3033 static int emac_probe(struct platform_device
*ofdev
)
3035 struct net_device
*ndev
;
3036 struct emac_instance
*dev
;
3037 struct device_node
*np
= ofdev
->dev
.of_node
;
3038 struct device_node
**blist
= NULL
;
3041 /* Skip unused/unwired EMACS. We leave the check for an unused
3042 * property here for now, but new flat device trees should set a
3043 * status property to "disabled" instead.
3045 if (of_get_property(np
, "unused", NULL
) || !of_device_is_available(np
))
3048 /* Find ourselves in the bootlist if we are there */
3049 for (i
= 0; i
< EMAC_BOOT_LIST_SIZE
; i
++)
3050 if (emac_boot_list
[i
] == np
)
3051 blist
= &emac_boot_list
[i
];
3053 /* Allocate our net_device structure */
3055 ndev
= alloc_etherdev(sizeof(struct emac_instance
));
3059 dev
= netdev_priv(ndev
);
3063 SET_NETDEV_DEV(ndev
, &ofdev
->dev
);
3065 /* Initialize some embedded data structures */
3066 mutex_init(&dev
->mdio_lock
);
3067 mutex_init(&dev
->link_lock
);
3068 spin_lock_init(&dev
->lock
);
3069 INIT_WORK(&dev
->reset_work
, emac_reset_work
);
3071 /* Init various config data based on device-tree */
3072 err
= emac_init_config(dev
);
3076 /* Get interrupts. EMAC irq is mandatory, WOL irq is optional */
3077 dev
->emac_irq
= irq_of_parse_and_map(np
, 0);
3078 dev
->wol_irq
= irq_of_parse_and_map(np
, 1);
3079 if (!dev
->emac_irq
) {
3080 printk(KERN_ERR
"%pOF: Can't map main interrupt\n", np
);
3084 ndev
->irq
= dev
->emac_irq
;
3087 // TODO : platform_get_resource() and devm_ioremap_resource()
3088 dev
->emacp
= of_iomap(np
, 0);
3089 if (dev
->emacp
== NULL
) {
3090 printk(KERN_ERR
"%pOF: Can't map device registers!\n", np
);
3095 /* Wait for dependent devices */
3096 err
= emac_wait_deps(dev
);
3099 "%pOF: Timeout waiting for dependent devices\n", np
);
3100 /* display more info about what's missing ? */
3103 dev
->mal
= platform_get_drvdata(dev
->mal_dev
);
3104 if (dev
->mdio_dev
!= NULL
)
3105 dev
->mdio_instance
= platform_get_drvdata(dev
->mdio_dev
);
3107 /* Register with MAL */
3108 dev
->commac
.ops
= &emac_commac_ops
;
3109 dev
->commac
.dev
= dev
;
3110 dev
->commac
.tx_chan_mask
= MAL_CHAN_MASK(dev
->mal_tx_chan
);
3111 dev
->commac
.rx_chan_mask
= MAL_CHAN_MASK(dev
->mal_rx_chan
);
3112 err
= mal_register_commac(dev
->mal
, &dev
->commac
);
3114 printk(KERN_ERR
"%pOF: failed to register with mal %pOF!\n",
3115 np
, dev
->mal_dev
->dev
.of_node
);
3118 dev
->rx_skb_size
= emac_rx_skb_size(ndev
->mtu
);
3119 dev
->rx_sync_size
= emac_rx_sync_size(ndev
->mtu
);
3121 /* Get pointers to BD rings */
3123 dev
->mal
->bd_virt
+ mal_tx_bd_offset(dev
->mal
, dev
->mal_tx_chan
);
3125 dev
->mal
->bd_virt
+ mal_rx_bd_offset(dev
->mal
, dev
->mal_rx_chan
);
3127 DBG(dev
, "tx_desc %p" NL
, dev
->tx_desc
);
3128 DBG(dev
, "rx_desc %p" NL
, dev
->rx_desc
);
3131 memset(dev
->tx_desc
, 0, NUM_TX_BUFF
* sizeof(struct mal_descriptor
));
3132 memset(dev
->rx_desc
, 0, NUM_RX_BUFF
* sizeof(struct mal_descriptor
));
3133 memset(dev
->tx_skb
, 0, NUM_TX_BUFF
* sizeof(struct sk_buff
*));
3134 memset(dev
->rx_skb
, 0, NUM_RX_BUFF
* sizeof(struct sk_buff
*));
3136 /* Attach to ZMII, if needed */
3137 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
) &&
3138 (err
= zmii_attach(dev
->zmii_dev
, dev
->zmii_port
, &dev
->phy_mode
)) != 0)
3139 goto err_unreg_commac
;
3141 /* Attach to RGMII, if needed */
3142 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
) &&
3143 (err
= rgmii_attach(dev
->rgmii_dev
, dev
->rgmii_port
, dev
->phy_mode
)) != 0)
3144 goto err_detach_zmii
;
3146 /* Attach to TAH, if needed */
3147 if (emac_has_feature(dev
, EMAC_FTR_HAS_TAH
) &&
3148 (err
= tah_attach(dev
->tah_dev
, dev
->tah_port
)) != 0)
3149 goto err_detach_rgmii
;
3151 /* Set some link defaults before we can find out real parameters */
3152 dev
->phy
.speed
= SPEED_100
;
3153 dev
->phy
.duplex
= DUPLEX_FULL
;
3154 dev
->phy
.autoneg
= AUTONEG_DISABLE
;
3155 dev
->phy
.pause
= dev
->phy
.asym_pause
= 0;
3156 dev
->stop_timeout
= STOP_TIMEOUT_100
;
3157 INIT_DELAYED_WORK(&dev
->link_work
, emac_link_timer
);
3159 /* Some SoCs like APM821xx does not support Half Duplex mode. */
3160 if (emac_has_feature(dev
, EMAC_FTR_APM821XX_NO_HALF_DUPLEX
)) {
3161 dev
->phy_feat_exc
= (SUPPORTED_1000baseT_Half
|
3162 SUPPORTED_100baseT_Half
|
3163 SUPPORTED_10baseT_Half
);
3166 /* Find PHY if any */
3167 err
= emac_init_phy(dev
);
3169 goto err_detach_tah
;
3172 ndev
->hw_features
= NETIF_F_IP_CSUM
| NETIF_F_SG
;
3173 ndev
->features
|= ndev
->hw_features
| NETIF_F_RXCSUM
;
3175 ndev
->watchdog_timeo
= 5 * HZ
;
3176 if (emac_phy_supports_gige(dev
->phy_mode
)) {
3177 ndev
->netdev_ops
= &emac_gige_netdev_ops
;
3178 dev
->commac
.ops
= &emac_commac_sg_ops
;
3180 ndev
->netdev_ops
= &emac_netdev_ops
;
3181 ndev
->ethtool_ops
= &emac_ethtool_ops
;
3183 /* MTU range: 46 - 1500 or whatever is in OF */
3184 ndev
->min_mtu
= EMAC_MIN_MTU
;
3185 ndev
->max_mtu
= dev
->max_mtu
;
3187 netif_carrier_off(ndev
);
3189 err
= register_netdev(ndev
);
3191 printk(KERN_ERR
"%pOF: failed to register net device (%d)!\n",
3193 goto err_detach_tah
;
3196 /* Set our drvdata last as we don't want them visible until we are
3200 platform_set_drvdata(ofdev
, dev
);
3202 /* There's a new kid in town ! Let's tell everybody */
3203 wake_up_all(&emac_probe_wait
);
3206 printk(KERN_INFO
"%s: EMAC-%d %pOF, MAC %pM\n",
3207 ndev
->name
, dev
->cell_index
, np
, ndev
->dev_addr
);
3209 if (dev
->phy_mode
== PHY_INTERFACE_MODE_SGMII
)
3210 printk(KERN_NOTICE
"%s: in SGMII mode\n", ndev
->name
);
3212 if (dev
->phy
.address
>= 0)
3213 printk("%s: found %s PHY (0x%02x)\n", ndev
->name
,
3214 dev
->phy
.def
->name
, dev
->phy
.address
);
3219 /* I have a bad feeling about this ... */
3222 if (emac_has_feature(dev
, EMAC_FTR_HAS_TAH
))
3223 tah_detach(dev
->tah_dev
, dev
->tah_port
);
3225 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
))
3226 rgmii_detach(dev
->rgmii_dev
, dev
->rgmii_port
);
3228 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
))
3229 zmii_detach(dev
->zmii_dev
, dev
->zmii_port
);
3231 mal_unregister_commac(dev
->mal
, &dev
->commac
);
3235 iounmap(dev
->emacp
);
3238 irq_dispose_mapping(dev
->wol_irq
);
3240 irq_dispose_mapping(dev
->emac_irq
);
3244 /* if we were on the bootlist, remove us as we won't show up and
3245 * wake up all waiters to notify them in case they were waiting
3250 wake_up_all(&emac_probe_wait
);
3255 static int emac_remove(struct platform_device
*ofdev
)
3257 struct emac_instance
*dev
= platform_get_drvdata(ofdev
);
3259 DBG(dev
, "remove" NL
);
3261 unregister_netdev(dev
->ndev
);
3263 cancel_work_sync(&dev
->reset_work
);
3265 if (emac_has_feature(dev
, EMAC_FTR_HAS_TAH
))
3266 tah_detach(dev
->tah_dev
, dev
->tah_port
);
3267 if (emac_has_feature(dev
, EMAC_FTR_HAS_RGMII
))
3268 rgmii_detach(dev
->rgmii_dev
, dev
->rgmii_port
);
3269 if (emac_has_feature(dev
, EMAC_FTR_HAS_ZMII
))
3270 zmii_detach(dev
->zmii_dev
, dev
->zmii_port
);
3273 phy_disconnect(dev
->phy_dev
);
3276 mdiobus_unregister(dev
->mii_bus
);
3278 busy_phy_map
&= ~(1 << dev
->phy
.address
);
3279 DBG(dev
, "busy_phy_map now %#x" NL
, busy_phy_map
);
3281 mal_unregister_commac(dev
->mal
, &dev
->commac
);
3284 iounmap(dev
->emacp
);
3287 irq_dispose_mapping(dev
->wol_irq
);
3289 irq_dispose_mapping(dev
->emac_irq
);
3291 free_netdev(dev
->ndev
);
3296 /* XXX Features in here should be replaced by properties... */
3297 static const struct of_device_id emac_match
[] =
3301 .compatible
= "ibm,emac",
3305 .compatible
= "ibm,emac4",
3309 .compatible
= "ibm,emac4sync",
3313 MODULE_DEVICE_TABLE(of
, emac_match
);
3315 static struct platform_driver emac_driver
= {
3318 .of_match_table
= emac_match
,
3320 .probe
= emac_probe
,
3321 .remove
= emac_remove
,
3324 static void __init
emac_make_bootlist(void)
3326 struct device_node
*np
= NULL
;
3328 int cell_indices
[EMAC_BOOT_LIST_SIZE
];
3331 while((np
= of_find_all_nodes(np
)) != NULL
) {
3334 if (of_match_node(emac_match
, np
) == NULL
)
3336 if (of_get_property(np
, "unused", NULL
))
3338 idx
= of_get_property(np
, "cell-index", NULL
);
3341 cell_indices
[i
] = *idx
;
3342 emac_boot_list
[i
++] = of_node_get(np
);
3343 if (i
>= EMAC_BOOT_LIST_SIZE
) {
3350 /* Bubble sort them (doh, what a creative algorithm :-) */
3351 for (i
= 0; max
> 1 && (i
< (max
- 1)); i
++)
3352 for (j
= i
; j
< max
; j
++) {
3353 if (cell_indices
[i
] > cell_indices
[j
]) {
3354 swap(emac_boot_list
[i
], emac_boot_list
[j
]);
3355 swap(cell_indices
[i
], cell_indices
[j
]);
3360 static int __init
emac_init(void)
3364 printk(KERN_INFO DRV_DESC
", version " DRV_VERSION
"\n");
3366 /* Build EMAC boot list */
3367 emac_make_bootlist();
3369 /* Init submodules */
3382 rc
= platform_driver_register(&emac_driver
);
3400 static void __exit
emac_exit(void)
3404 platform_driver_unregister(&emac_driver
);
3411 /* Destroy EMAC boot list */
3412 for (i
= 0; i
< EMAC_BOOT_LIST_SIZE
; i
++)
3413 of_node_put(emac_boot_list
[i
]);
3416 module_init(emac_init
);
3417 module_exit(emac_exit
);