2 * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
34 #include <linux/cpumask.h>
35 #include <linux/module.h>
36 #include <linux/delay.h>
37 #include <linux/netdevice.h>
38 #include <linux/slab.h>
40 #include <linux/mlx4/driver.h>
41 #include <linux/mlx4/device.h>
42 #include <linux/mlx4/cmd.h>
46 MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin");
47 MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver");
48 MODULE_LICENSE("Dual BSD/GPL");
49 MODULE_VERSION(DRV_VERSION
);
51 static const char mlx4_en_version
[] =
52 DRV_NAME
": Mellanox ConnectX HCA Ethernet driver v"
55 #define MLX4_EN_PARM_INT(X, def_val, desc) \
56 static unsigned int X = def_val;\
57 module_param(X , uint, 0444); \
58 MODULE_PARM_DESC(X, desc);
62 * Device scope module parameters
65 /* Enable RSS UDP traffic */
66 MLX4_EN_PARM_INT(udp_rss
, 1,
67 "Enable RSS for incoming UDP traffic or disabled (0)");
69 /* Priority pausing */
70 MLX4_EN_PARM_INT(pfctx
, 0, "Priority based Flow Control policy on TX[7:0]."
71 " Per priority bit mask");
72 MLX4_EN_PARM_INT(pfcrx
, 0, "Priority based Flow Control policy on RX[7:0]."
73 " Per priority bit mask");
75 MLX4_EN_PARM_INT(inline_thold
, MAX_INLINE
,
76 "Threshold for using inline data (range: 17-104, default: 104)");
78 #define MAX_PFC_TX 0xff
79 #define MAX_PFC_RX 0xff
81 void en_print(const char *level
, const struct mlx4_en_priv
*priv
,
82 const char *format
, ...)
87 va_start(args
, format
);
92 printk("%s%s: %s: %pV",
93 level
, DRV_NAME
, priv
->dev
->name
, &vaf
);
95 printk("%s%s: %s: Port %d: %pV",
96 level
, DRV_NAME
, dev_name(&priv
->mdev
->pdev
->dev
),
101 void mlx4_en_update_loopback_state(struct net_device
*dev
,
102 netdev_features_t features
)
104 struct mlx4_en_priv
*priv
= netdev_priv(dev
);
106 if (features
& NETIF_F_LOOPBACK
)
107 priv
->ctrl_flags
|= cpu_to_be32(MLX4_WQE_CTRL_FORCE_LOOPBACK
);
109 priv
->ctrl_flags
&= cpu_to_be32(~MLX4_WQE_CTRL_FORCE_LOOPBACK
);
111 priv
->flags
&= ~(MLX4_EN_FLAG_RX_FILTER_NEEDED
|
112 MLX4_EN_FLAG_ENABLE_HW_LOOPBACK
);
114 /* Drop the packet if SRIOV is not enabled
115 * and not performing the selftest or flb disabled
117 if (mlx4_is_mfunc(priv
->mdev
->dev
) &&
118 !(features
& NETIF_F_LOOPBACK
) && !priv
->validate_loopback
)
119 priv
->flags
|= MLX4_EN_FLAG_RX_FILTER_NEEDED
;
121 /* Set dmac in Tx WQE if we are in SRIOV mode or if loopback selftest
124 if (mlx4_is_mfunc(priv
->mdev
->dev
) || priv
->validate_loopback
)
125 priv
->flags
|= MLX4_EN_FLAG_ENABLE_HW_LOOPBACK
;
127 mutex_lock(&priv
->mdev
->state_lock
);
128 if ((priv
->mdev
->dev
->caps
.flags2
&
129 MLX4_DEV_CAP_FLAG2_UPDATE_QP_SRC_CHECK_LB
) &&
130 priv
->rss_map
.indir_qp
&& priv
->rss_map
.indir_qp
->qpn
) {
133 int loopback
= !!(features
& NETIF_F_LOOPBACK
);
135 for (i
= 0; i
< priv
->rx_ring_num
; i
++) {
138 ret
= mlx4_en_change_mcast_lb(priv
,
139 &priv
->rss_map
.qps
[i
],
145 mlx4_warn(priv
->mdev
, "failed to change mcast loopback\n");
147 mutex_unlock(&priv
->mdev
->state_lock
);
150 static void mlx4_en_get_profile(struct mlx4_en_dev
*mdev
)
152 struct mlx4_en_profile
*params
= &mdev
->profile
;
155 params
->udp_rss
= udp_rss
;
156 params
->max_num_tx_rings_p_up
= mlx4_low_memory_profile() ?
157 MLX4_EN_MIN_TX_RING_P_UP
:
158 min_t(int, num_online_cpus(), MLX4_EN_MAX_TX_RING_P_UP
);
160 if (params
->udp_rss
&& !(mdev
->dev
->caps
.flags
161 & MLX4_DEV_CAP_FLAG_UDP_RSS
)) {
162 mlx4_warn(mdev
, "UDP RSS is not supported on this device\n");
165 for (i
= 1; i
<= MLX4_MAX_PORTS
; i
++) {
166 params
->prof
[i
].rx_pause
= !(pfcrx
|| pfctx
);
167 params
->prof
[i
].rx_ppp
= pfcrx
;
168 params
->prof
[i
].tx_pause
= !(pfcrx
|| pfctx
);
169 params
->prof
[i
].tx_ppp
= pfctx
;
170 if (mlx4_low_memory_profile()) {
171 params
->prof
[i
].tx_ring_size
= MLX4_EN_MIN_TX_SIZE
;
172 params
->prof
[i
].rx_ring_size
= MLX4_EN_MIN_RX_SIZE
;
174 params
->prof
[i
].tx_ring_size
= MLX4_EN_DEF_TX_RING_SIZE
;
175 params
->prof
[i
].rx_ring_size
= MLX4_EN_DEF_RX_RING_SIZE
;
177 params
->prof
[i
].num_up
= MLX4_EN_NUM_UP_LOW
;
178 params
->prof
[i
].num_tx_rings_p_up
= params
->max_num_tx_rings_p_up
;
179 params
->prof
[i
].tx_ring_num
[TX
] = params
->max_num_tx_rings_p_up
*
180 params
->prof
[i
].num_up
;
181 params
->prof
[i
].rss_rings
= 0;
182 params
->prof
[i
].inline_thold
= inline_thold
;
186 static void *mlx4_en_get_netdev(struct mlx4_dev
*dev
, void *ctx
, u8 port
)
188 struct mlx4_en_dev
*endev
= ctx
;
190 return endev
->pndev
[port
];
193 static void mlx4_en_event(struct mlx4_dev
*dev
, void *endev_ptr
,
194 enum mlx4_dev_event event
, unsigned long port
)
196 struct mlx4_en_dev
*mdev
= (struct mlx4_en_dev
*) endev_ptr
;
197 struct mlx4_en_priv
*priv
;
200 case MLX4_DEV_EVENT_PORT_UP
:
201 case MLX4_DEV_EVENT_PORT_DOWN
:
202 if (!mdev
->pndev
[port
])
204 priv
= netdev_priv(mdev
->pndev
[port
]);
205 /* To prevent races, we poll the link state in a separate
206 task rather than changing it here */
207 priv
->link_state
= event
;
208 queue_work(mdev
->workqueue
, &priv
->linkstate_task
);
211 case MLX4_DEV_EVENT_CATASTROPHIC_ERROR
:
212 mlx4_err(mdev
, "Internal error detected, restarting device\n");
215 case MLX4_DEV_EVENT_SLAVE_INIT
:
216 case MLX4_DEV_EVENT_SLAVE_SHUTDOWN
:
219 if (port
< 1 || port
> dev
->caps
.num_ports
||
222 mlx4_warn(mdev
, "Unhandled event %d for port %d\n", event
,
227 static void mlx4_en_remove(struct mlx4_dev
*dev
, void *endev_ptr
)
229 struct mlx4_en_dev
*mdev
= endev_ptr
;
232 mutex_lock(&mdev
->state_lock
);
233 mdev
->device_up
= false;
234 mutex_unlock(&mdev
->state_lock
);
236 mlx4_foreach_port(i
, dev
, MLX4_PORT_TYPE_ETH
)
238 mlx4_en_destroy_netdev(mdev
->pndev
[i
]);
240 flush_workqueue(mdev
->workqueue
);
241 destroy_workqueue(mdev
->workqueue
);
242 (void) mlx4_mr_free(dev
, &mdev
->mr
);
243 iounmap(mdev
->uar_map
);
244 mlx4_uar_free(dev
, &mdev
->priv_uar
);
245 mlx4_pd_free(dev
, mdev
->priv_pdn
);
246 if (mdev
->nb
.notifier_call
)
247 unregister_netdevice_notifier(&mdev
->nb
);
251 static void mlx4_en_activate(struct mlx4_dev
*dev
, void *ctx
)
254 struct mlx4_en_dev
*mdev
= ctx
;
256 /* Create a netdev for each port */
257 mlx4_foreach_port(i
, dev
, MLX4_PORT_TYPE_ETH
) {
258 mlx4_info(mdev
, "Activating port:%d\n", i
);
259 if (mlx4_en_init_netdev(mdev
, i
, &mdev
->profile
.prof
[i
]))
260 mdev
->pndev
[i
] = NULL
;
263 /* register notifier */
264 mdev
->nb
.notifier_call
= mlx4_en_netdev_event
;
265 if (register_netdevice_notifier(&mdev
->nb
)) {
266 mdev
->nb
.notifier_call
= NULL
;
267 mlx4_err(mdev
, "Failed to create notifier\n");
271 static void *mlx4_en_add(struct mlx4_dev
*dev
)
273 struct mlx4_en_dev
*mdev
;
276 printk_once(KERN_INFO
"%s", mlx4_en_version
);
278 mdev
= kzalloc(sizeof(*mdev
), GFP_KERNEL
);
282 if (mlx4_pd_alloc(dev
, &mdev
->priv_pdn
))
285 if (mlx4_uar_alloc(dev
, &mdev
->priv_uar
))
288 mdev
->uar_map
= ioremap((phys_addr_t
) mdev
->priv_uar
.pfn
<< PAGE_SHIFT
,
292 spin_lock_init(&mdev
->uar_lock
);
295 mdev
->dma_device
= &dev
->persist
->pdev
->dev
;
296 mdev
->pdev
= dev
->persist
->pdev
;
297 mdev
->device_up
= false;
299 mdev
->LSO_support
= !!(dev
->caps
.flags
& (1 << 15));
300 if (!mdev
->LSO_support
)
301 mlx4_warn(mdev
, "LSO not supported, please upgrade to later FW version to enable LSO\n");
303 if (mlx4_mr_alloc(mdev
->dev
, mdev
->priv_pdn
, 0, ~0ull,
304 MLX4_PERM_LOCAL_WRITE
| MLX4_PERM_LOCAL_READ
,
306 mlx4_err(mdev
, "Failed allocating memory region\n");
309 if (mlx4_mr_enable(mdev
->dev
, &mdev
->mr
)) {
310 mlx4_err(mdev
, "Failed enabling memory region\n");
314 /* Build device profile according to supplied module parameters */
315 mlx4_en_get_profile(mdev
);
317 /* Configure which ports to start according to module parameters */
319 mlx4_foreach_port(i
, dev
, MLX4_PORT_TYPE_ETH
)
322 /* Set default number of RX rings*/
323 mlx4_en_set_num_rx_rings(mdev
);
325 /* Create our own workqueue for reset/multicast tasks
326 * Note: we cannot use the shared workqueue because of deadlocks caused
327 * by the rtnl lock */
328 mdev
->workqueue
= create_singlethread_workqueue("mlx4_en");
329 if (!mdev
->workqueue
)
332 /* At this stage all non-port specific tasks are complete:
333 * mark the card state as up */
334 mutex_init(&mdev
->state_lock
);
335 mdev
->device_up
= true;
340 (void) mlx4_mr_free(dev
, &mdev
->mr
);
343 iounmap(mdev
->uar_map
);
345 mlx4_uar_free(dev
, &mdev
->priv_uar
);
347 mlx4_pd_free(dev
, mdev
->priv_pdn
);
354 static struct mlx4_interface mlx4_en_interface
= {
356 .remove
= mlx4_en_remove
,
357 .event
= mlx4_en_event
,
358 .get_dev
= mlx4_en_get_netdev
,
359 .protocol
= MLX4_PROT_ETH
,
360 .activate
= mlx4_en_activate
,
363 static void mlx4_en_verify_params(void)
365 if (pfctx
> MAX_PFC_TX
) {
366 pr_warn("mlx4_en: WARNING: illegal module parameter pfctx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",
371 if (pfcrx
> MAX_PFC_RX
) {
372 pr_warn("mlx4_en: WARNING: illegal module parameter pfcrx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",
377 if (inline_thold
< MIN_PKT_LEN
|| inline_thold
> MAX_INLINE
) {
378 pr_warn("mlx4_en: WARNING: illegal module parameter inline_thold %d - should be in range %d-%d, will be changed to default (%d)\n",
379 inline_thold
, MIN_PKT_LEN
, MAX_INLINE
, MAX_INLINE
);
380 inline_thold
= MAX_INLINE
;
384 static int __init
mlx4_en_init(void)
386 mlx4_en_verify_params();
387 mlx4_en_init_ptys2ethtool_map();
389 return mlx4_register_interface(&mlx4_en_interface
);
392 static void __exit
mlx4_en_cleanup(void)
394 mlx4_unregister_interface(&mlx4_en_interface
);
397 module_init(mlx4_en_init
);
398 module_exit(mlx4_en_cleanup
);