WIP FPC-III support
[linux/fpc-iii.git] / drivers / net / wireless / ralink / rt2x00 / rt2800soc.c
blobbbfe1425c0ee5b62095c189207d554f51f350d4d
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
3 * Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
4 * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
5 * Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
6 * Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
7 * Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
8 * Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
9 * Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
10 * <http://rt2x00.serialmonkey.com>
13 /* Module: rt2800soc
14 * Abstract: rt2800 WiSoC specific routines.
17 #include <linux/etherdevice.h>
18 #include <linux/init.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/platform_device.h>
23 #include "rt2x00.h"
24 #include "rt2x00mmio.h"
25 #include "rt2x00soc.h"
26 #include "rt2800.h"
27 #include "rt2800lib.h"
28 #include "rt2800mmio.h"
30 /* Allow hardware encryption to be disabled. */
31 static bool modparam_nohwcrypt;
32 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, 0444);
33 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
35 static bool rt2800soc_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
37 return modparam_nohwcrypt;
40 static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
42 u32 reg;
44 rt2800_disable_radio(rt2x00dev);
45 rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0);
47 reg = 0;
48 if (rt2x00_rt(rt2x00dev, RT3883))
49 rt2x00_set_field32(&reg, TX_PIN_CFG_RFTR_EN, 1);
51 rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, reg);
54 static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
55 enum dev_state state)
57 int retval = 0;
59 switch (state) {
60 case STATE_RADIO_ON:
61 retval = rt2800mmio_enable_radio(rt2x00dev);
62 break;
64 case STATE_RADIO_OFF:
65 rt2800soc_disable_radio(rt2x00dev);
66 break;
68 case STATE_RADIO_IRQ_ON:
69 case STATE_RADIO_IRQ_OFF:
70 rt2800mmio_toggle_irq(rt2x00dev, state);
71 break;
73 case STATE_DEEP_SLEEP:
74 case STATE_SLEEP:
75 case STATE_STANDBY:
76 case STATE_AWAKE:
77 /* These states are not supported, but don't report an error */
78 retval = 0;
79 break;
81 default:
82 retval = -ENOTSUPP;
83 break;
86 if (unlikely(retval))
87 rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
88 state, retval);
90 return retval;
93 static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev)
95 void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
97 if (!base_addr)
98 return -ENOMEM;
100 memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
102 iounmap(base_addr);
103 return 0;
106 /* Firmware functions */
107 static char *rt2800soc_get_firmware_name(struct rt2x00_dev *rt2x00dev)
109 WARN_ON_ONCE(1);
110 return NULL;
113 static int rt2800soc_load_firmware(struct rt2x00_dev *rt2x00dev,
114 const u8 *data, const size_t len)
116 WARN_ON_ONCE(1);
117 return 0;
120 static int rt2800soc_check_firmware(struct rt2x00_dev *rt2x00dev,
121 const u8 *data, const size_t len)
123 WARN_ON_ONCE(1);
124 return 0;
127 static int rt2800soc_write_firmware(struct rt2x00_dev *rt2x00dev,
128 const u8 *data, const size_t len)
130 WARN_ON_ONCE(1);
131 return 0;
134 static const struct ieee80211_ops rt2800soc_mac80211_ops = {
135 .tx = rt2x00mac_tx,
136 .start = rt2x00mac_start,
137 .stop = rt2x00mac_stop,
138 .add_interface = rt2x00mac_add_interface,
139 .remove_interface = rt2x00mac_remove_interface,
140 .config = rt2x00mac_config,
141 .configure_filter = rt2x00mac_configure_filter,
142 .set_key = rt2x00mac_set_key,
143 .sw_scan_start = rt2x00mac_sw_scan_start,
144 .sw_scan_complete = rt2x00mac_sw_scan_complete,
145 .get_stats = rt2x00mac_get_stats,
146 .get_key_seq = rt2800_get_key_seq,
147 .set_rts_threshold = rt2800_set_rts_threshold,
148 .sta_add = rt2800_sta_add,
149 .sta_remove = rt2800_sta_remove,
150 .bss_info_changed = rt2x00mac_bss_info_changed,
151 .conf_tx = rt2800_conf_tx,
152 .get_tsf = rt2800_get_tsf,
153 .rfkill_poll = rt2x00mac_rfkill_poll,
154 .ampdu_action = rt2800_ampdu_action,
155 .flush = rt2x00mac_flush,
156 .get_survey = rt2800_get_survey,
157 .get_ringparam = rt2x00mac_get_ringparam,
158 .tx_frames_pending = rt2x00mac_tx_frames_pending,
159 .reconfig_complete = rt2x00mac_reconfig_complete,
162 static const struct rt2800_ops rt2800soc_rt2800_ops = {
163 .register_read = rt2x00mmio_register_read,
164 .register_read_lock = rt2x00mmio_register_read, /* same for SoCs */
165 .register_write = rt2x00mmio_register_write,
166 .register_write_lock = rt2x00mmio_register_write, /* same for SoCs */
167 .register_multiread = rt2x00mmio_register_multiread,
168 .register_multiwrite = rt2x00mmio_register_multiwrite,
169 .regbusy_read = rt2x00mmio_regbusy_read,
170 .read_eeprom = rt2800soc_read_eeprom,
171 .hwcrypt_disabled = rt2800soc_hwcrypt_disabled,
172 .drv_write_firmware = rt2800soc_write_firmware,
173 .drv_init_registers = rt2800mmio_init_registers,
174 .drv_get_txwi = rt2800mmio_get_txwi,
175 .drv_get_dma_done = rt2800mmio_get_dma_done,
178 static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
179 .irq_handler = rt2800mmio_interrupt,
180 .txstatus_tasklet = rt2800mmio_txstatus_tasklet,
181 .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet,
182 .tbtt_tasklet = rt2800mmio_tbtt_tasklet,
183 .rxdone_tasklet = rt2800mmio_rxdone_tasklet,
184 .autowake_tasklet = rt2800mmio_autowake_tasklet,
185 .probe_hw = rt2800mmio_probe_hw,
186 .get_firmware_name = rt2800soc_get_firmware_name,
187 .check_firmware = rt2800soc_check_firmware,
188 .load_firmware = rt2800soc_load_firmware,
189 .initialize = rt2x00mmio_initialize,
190 .uninitialize = rt2x00mmio_uninitialize,
191 .get_entry_state = rt2800mmio_get_entry_state,
192 .clear_entry = rt2800mmio_clear_entry,
193 .set_device_state = rt2800soc_set_device_state,
194 .rfkill_poll = rt2800_rfkill_poll,
195 .link_stats = rt2800_link_stats,
196 .reset_tuner = rt2800_reset_tuner,
197 .link_tuner = rt2800_link_tuner,
198 .gain_calibration = rt2800_gain_calibration,
199 .vco_calibration = rt2800_vco_calibration,
200 .watchdog = rt2800_watchdog,
201 .start_queue = rt2800mmio_start_queue,
202 .kick_queue = rt2800mmio_kick_queue,
203 .stop_queue = rt2800mmio_stop_queue,
204 .flush_queue = rt2800mmio_flush_queue,
205 .write_tx_desc = rt2800mmio_write_tx_desc,
206 .write_tx_data = rt2800_write_tx_data,
207 .write_beacon = rt2800_write_beacon,
208 .clear_beacon = rt2800_clear_beacon,
209 .fill_rxdone = rt2800mmio_fill_rxdone,
210 .config_shared_key = rt2800_config_shared_key,
211 .config_pairwise_key = rt2800_config_pairwise_key,
212 .config_filter = rt2800_config_filter,
213 .config_intf = rt2800_config_intf,
214 .config_erp = rt2800_config_erp,
215 .config_ant = rt2800_config_ant,
216 .config = rt2800_config,
217 .pre_reset_hw = rt2800_pre_reset_hw,
220 static const struct rt2x00_ops rt2800soc_ops = {
221 .name = KBUILD_MODNAME,
222 .drv_data_size = sizeof(struct rt2800_drv_data),
223 .max_ap_intf = 8,
224 .eeprom_size = EEPROM_SIZE,
225 .rf_size = RF_SIZE,
226 .tx_queues = NUM_TX_QUEUES,
227 .queue_init = rt2800mmio_queue_init,
228 .lib = &rt2800soc_rt2x00_ops,
229 .drv = &rt2800soc_rt2800_ops,
230 .hw = &rt2800soc_mac80211_ops,
231 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
232 .debugfs = &rt2800_rt2x00debug,
233 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
236 static int rt2800soc_probe(struct platform_device *pdev)
238 return rt2x00soc_probe(pdev, &rt2800soc_ops);
241 static struct platform_driver rt2800soc_driver = {
242 .driver = {
243 .name = "rt2800_wmac",
244 .mod_name = KBUILD_MODNAME,
246 .probe = rt2800soc_probe,
247 .remove = rt2x00soc_remove,
248 .suspend = rt2x00soc_suspend,
249 .resume = rt2x00soc_resume,
252 module_platform_driver(rt2800soc_driver);
254 MODULE_AUTHOR(DRV_PROJECT);
255 MODULE_VERSION(DRV_VERSION);
256 MODULE_DESCRIPTION("Ralink WiSoC Wireless LAN driver.");
257 MODULE_LICENSE("GPL");