1 // SPDX-License-Identifier: GPL-2.0-only
2 #include <linux/types.h>
3 #include <linux/init.h>
4 #include <linux/interrupt.h>
6 #include <linux/slab.h>
7 #include <linux/spinlock.h>
8 #include <linux/zorro.h>
9 #include <linux/module.h>
12 #include <asm/amigaints.h>
13 #include <asm/amigahw.h>
20 struct a2091_hostdata
{
21 struct WD33C93_hostdata wh
;
22 struct a2091_scsiregs
*regs
;
25 static irqreturn_t
a2091_intr(int irq
, void *data
)
27 struct Scsi_Host
*instance
= data
;
28 struct a2091_hostdata
*hdata
= shost_priv(instance
);
29 unsigned int status
= hdata
->regs
->ISTR
;
32 if (!(status
& (ISTR_INT_F
| ISTR_INT_P
)) || !(status
& ISTR_INTS
))
35 spin_lock_irqsave(instance
->host_lock
, flags
);
36 wd33c93_intr(instance
);
37 spin_unlock_irqrestore(instance
->host_lock
, flags
);
41 static int dma_setup(struct scsi_cmnd
*cmd
, int dir_in
)
43 struct Scsi_Host
*instance
= cmd
->device
->host
;
44 struct a2091_hostdata
*hdata
= shost_priv(instance
);
45 struct WD33C93_hostdata
*wh
= &hdata
->wh
;
46 struct a2091_scsiregs
*regs
= hdata
->regs
;
47 unsigned short cntr
= CNTR_PDMD
| CNTR_INTEN
;
48 unsigned long addr
= virt_to_bus(cmd
->SCp
.ptr
);
50 /* don't allow DMA if the physical address is bad */
51 if (addr
& A2091_XFER_MASK
) {
52 wh
->dma_bounce_len
= (cmd
->SCp
.this_residual
+ 511) & ~0x1ff;
53 wh
->dma_bounce_buffer
= kmalloc(wh
->dma_bounce_len
,
56 /* can't allocate memory; use PIO */
57 if (!wh
->dma_bounce_buffer
) {
58 wh
->dma_bounce_len
= 0;
62 /* get the physical address of the bounce buffer */
63 addr
= virt_to_bus(wh
->dma_bounce_buffer
);
65 /* the bounce buffer may not be in the first 16M of physmem */
66 if (addr
& A2091_XFER_MASK
) {
67 /* we could use chipmem... maybe later */
68 kfree(wh
->dma_bounce_buffer
);
69 wh
->dma_bounce_buffer
= NULL
;
70 wh
->dma_bounce_len
= 0;
75 /* copy to bounce buffer for a write */
76 memcpy(wh
->dma_bounce_buffer
, cmd
->SCp
.ptr
,
77 cmd
->SCp
.this_residual
);
81 /* setup dma direction */
85 /* remember direction */
90 /* setup DMA *physical* address */
94 /* invalidate any cache */
95 cache_clear(addr
, cmd
->SCp
.this_residual
);
97 /* push any dirty cache */
98 cache_push(addr
, cmd
->SCp
.this_residual
);
107 static void dma_stop(struct Scsi_Host
*instance
, struct scsi_cmnd
*SCpnt
,
110 struct a2091_hostdata
*hdata
= shost_priv(instance
);
111 struct WD33C93_hostdata
*wh
= &hdata
->wh
;
112 struct a2091_scsiregs
*regs
= hdata
->regs
;
114 /* disable SCSI interrupts */
115 unsigned short cntr
= CNTR_PDMD
;
120 /* disable SCSI interrupts */
123 /* flush if we were reading */
126 while (!(regs
->ISTR
& ISTR_FE_FLG
))
130 /* clear a possible interrupt */
136 /* restore the CONTROL bits (minus the direction flag) */
137 regs
->CNTR
= CNTR_PDMD
| CNTR_INTEN
;
139 /* copy from a bounce buffer, if necessary */
140 if (status
&& wh
->dma_bounce_buffer
) {
142 memcpy(SCpnt
->SCp
.ptr
, wh
->dma_bounce_buffer
,
143 SCpnt
->SCp
.this_residual
);
144 kfree(wh
->dma_bounce_buffer
);
145 wh
->dma_bounce_buffer
= NULL
;
146 wh
->dma_bounce_len
= 0;
150 static struct scsi_host_template a2091_scsi_template
= {
151 .module
= THIS_MODULE
,
152 .name
= "Commodore A2091/A590 SCSI",
153 .show_info
= wd33c93_show_info
,
154 .write_info
= wd33c93_write_info
,
155 .proc_name
= "A2901",
156 .queuecommand
= wd33c93_queuecommand
,
157 .eh_abort_handler
= wd33c93_abort
,
158 .eh_host_reset_handler
= wd33c93_host_reset
,
159 .can_queue
= CAN_QUEUE
,
161 .sg_tablesize
= SG_ALL
,
162 .cmd_per_lun
= CMD_PER_LUN
,
163 .dma_boundary
= PAGE_SIZE
- 1,
166 static int a2091_probe(struct zorro_dev
*z
, const struct zorro_device_id
*ent
)
168 struct Scsi_Host
*instance
;
170 struct a2091_scsiregs
*regs
;
172 struct a2091_hostdata
*hdata
;
174 if (!request_mem_region(z
->resource
.start
, 256, "wd33c93"))
177 instance
= scsi_host_alloc(&a2091_scsi_template
,
178 sizeof(struct a2091_hostdata
));
184 instance
->irq
= IRQ_AMIGA_PORTS
;
185 instance
->unique_id
= z
->slotaddr
;
187 regs
= ZTWO_VADDR(z
->resource
.start
);
188 regs
->DAWR
= DAWR_A2091
;
190 wdregs
.SASR
= ®s
->SASR
;
191 wdregs
.SCMD
= ®s
->SCMD
;
193 hdata
= shost_priv(instance
);
194 hdata
->wh
.no_sync
= 0xff;
196 hdata
->wh
.dma_mode
= CTRL_DMA
;
199 wd33c93_init(instance
, wdregs
, dma_setup
, dma_stop
, WD33C93_FS_8_10
);
200 error
= request_irq(IRQ_AMIGA_PORTS
, a2091_intr
, IRQF_SHARED
,
201 "A2091 SCSI", instance
);
205 regs
->CNTR
= CNTR_PDMD
| CNTR_INTEN
;
207 error
= scsi_add_host(instance
, NULL
);
211 zorro_set_drvdata(z
, instance
);
213 scsi_scan_host(instance
);
217 free_irq(IRQ_AMIGA_PORTS
, instance
);
219 scsi_host_put(instance
);
221 release_mem_region(z
->resource
.start
, 256);
225 static void a2091_remove(struct zorro_dev
*z
)
227 struct Scsi_Host
*instance
= zorro_get_drvdata(z
);
228 struct a2091_hostdata
*hdata
= shost_priv(instance
);
230 hdata
->regs
->CNTR
= 0;
231 scsi_remove_host(instance
);
232 free_irq(IRQ_AMIGA_PORTS
, instance
);
233 scsi_host_put(instance
);
234 release_mem_region(z
->resource
.start
, 256);
237 static struct zorro_device_id a2091_zorro_tbl
[] = {
238 { ZORRO_PROD_CBM_A590_A2091_1
},
239 { ZORRO_PROD_CBM_A590_A2091_2
},
242 MODULE_DEVICE_TABLE(zorro
, a2091_zorro_tbl
);
244 static struct zorro_driver a2091_driver
= {
246 .id_table
= a2091_zorro_tbl
,
247 .probe
= a2091_probe
,
248 .remove
= a2091_remove
,
251 static int __init
a2091_init(void)
253 return zorro_register_driver(&a2091_driver
);
255 module_init(a2091_init
);
257 static void __exit
a2091_exit(void)
259 zorro_unregister_driver(&a2091_driver
);
261 module_exit(a2091_exit
);
263 MODULE_DESCRIPTION("Commodore A2091/A590 SCSI");
264 MODULE_LICENSE("GPL");