WIP FPC-III support

[linux/fpc-iii.git] / drivers / thermal / gov_power_allocator.c

// SPDX-License-Identifier: GPL-2.0
/*
 * A power allocator to manage temperature
 *
 * Copyright (C) 2014 ARM Ltd.
 *
 */

#define pr_fmt(fmt) "Power allocator: " fmt

#include <linux/rculist.h>
#include <linux/slab.h>
#include <linux/thermal.h>

#define CREATE_TRACE_POINTS
#include <trace/events/thermal_power_allocator.h>

#include "thermal_core.h"

#define INVALID_TRIP -1

#define FRAC_BITS 10
#define int_to_frac(x) ((x) << FRAC_BITS)
#define frac_to_int(x) ((x) >> FRAC_BITS)

/**
 * mul_frac() - multiply two fixed-point numbers
 * @x:  first multiplicand
 * @y:  second multiplicand
 *
 * Return: the result of multiplying two fixed-point numbers.  The
 * result is also a fixed-point number.
 */
static inline s64 mul_frac(s64 x, s64 y)
{
        return (x * y) >> FRAC_BITS;
}

/**
 * div_frac() - divide two fixed-point numbers
 * @x:  the dividend
 * @y:  the divisor
 *
 * Return: the result of dividing two fixed-point numbers.  The
 * result is also a fixed-point number.
 */
static inline s64 div_frac(s64 x, s64 y)
{
        return div_s64(x << FRAC_BITS, y);
}

/**
 * struct power_allocator_params - parameters for the power allocator governor
 * @allocated_tzp:      whether we have allocated tzp for this thermal zone and
 *                      it needs to be freed on unbind
 * @err_integral:       accumulated error in the PID controller.
 * @prev_err:   error in the previous iteration of the PID controller.
 *              Used to calculate the derivative term.
 * @trip_switch_on:     first passive trip point of the thermal zone.  The
 *                      governor switches on when this trip point is crossed.
 *                      If the thermal zone only has one passive trip point,
 *                      @trip_switch_on should be INVALID_TRIP.
 * @trip_max_desired_temperature:       last passive trip point of the thermal
 *                                      zone.  The temperature we are
 *                                      controlling for.
 * @sustainable_power:  Sustainable power (heat) that this thermal zone can
 *                      dissipate
 */
struct power_allocator_params {
        bool allocated_tzp;
        s64 err_integral;
        s32 prev_err;
        int trip_switch_on;
        int trip_max_desired_temperature;
        u32 sustainable_power;
};

/**
 * estimate_sustainable_power() - Estimate the sustainable power of a thermal zone
 * @tz: thermal zone we are operating in
 *
 * For thermal zones that don't provide a sustainable_power in their
 * thermal_zone_params, estimate one.  Calculate it using the minimum
 * power of all the cooling devices as that gives a valid value that
 * can give some degree of functionality.  For optimal performance of
 * this governor, provide a sustainable_power in the thermal zone's
 * thermal_zone_params.
 */
static u32 estimate_sustainable_power(struct thermal_zone_device *tz)
{
        u32 sustainable_power = 0;
        struct thermal_instance *instance;
        struct power_allocator_params *params = tz->governor_data;

        list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
                struct thermal_cooling_device *cdev = instance->cdev;
                u32 min_power;

                if (instance->trip != params->trip_max_desired_temperature)
                        continue;

                if (!cdev_is_power_actor(cdev))
                        continue;

                if (cdev->ops->state2power(cdev, instance->upper, &min_power))
                        continue;

                sustainable_power += min_power;
        }

        return sustainable_power;
}

/**
 * estimate_pid_constants() - Estimate the constants for the PID controller
 * @tz:         thermal zone for which to estimate the constants
 * @sustainable_power:  sustainable power for the thermal zone
 * @trip_switch_on:     trip point number for the switch on temperature
 * @control_temp:       target temperature for the power allocator governor
 *
 * This function is used to update the estimation of the PID
 * controller constants in struct thermal_zone_parameters.
 */
static void estimate_pid_constants(struct thermal_zone_device *tz,
                                   u32 sustainable_power, int trip_switch_on,
                                   int control_temp)
{
        int ret;
        int switch_on_temp;
        u32 temperature_threshold;
        s32 k_i;

        ret = tz->ops->get_trip_temp(tz, trip_switch_on, &switch_on_temp);
        if (ret)
                switch_on_temp = 0;

        temperature_threshold = control_temp - switch_on_temp;
        /*
         * estimate_pid_constants() tries to find appropriate default
         * values for thermal zones that don't provide them. If a
         * system integrator has configured a thermal zone with two
         * passive trip points at the same temperature, that person
         * hasn't put any effort to set up the thermal zone properly
         * so just give up.
         */
        if (!temperature_threshold)
                return;

        tz->tzp->k_po = int_to_frac(sustainable_power) /
                temperature_threshold;

        tz->tzp->k_pu = int_to_frac(2 * sustainable_power) /
                temperature_threshold;

        k_i = tz->tzp->k_pu / 10;
        tz->tzp->k_i = k_i > 0 ? k_i : 1;

        /*
         * The default for k_d and integral_cutoff is 0, so we can
         * leave them as they are.
         */
}

/**
 * get_sustainable_power() - Get the right sustainable power
 * @tz:         thermal zone for which to estimate the constants
 * @params:     parameters for the power allocator governor
 * @control_temp:       target temperature for the power allocator governor
 *
 * This function is used for getting the proper sustainable power value based
 * on variables which might be updated by the user sysfs interface. If that
 * happen the new value is going to be estimated and updated. It is also used
 * after thermal zone binding, where the initial values where set to 0.
 */
static u32 get_sustainable_power(struct thermal_zone_device *tz,
                                 struct power_allocator_params *params,
                                 int control_temp)
{
        u32 sustainable_power;

        if (!tz->tzp->sustainable_power)
                sustainable_power = estimate_sustainable_power(tz);
        else
                sustainable_power = tz->tzp->sustainable_power;

        /* Check if it's init value 0 or there was update via sysfs */
        if (sustainable_power != params->sustainable_power) {
                estimate_pid_constants(tz, sustainable_power,
                                       params->trip_switch_on, control_temp);

                /* Do the estimation only once and make available in sysfs */
                tz->tzp->sustainable_power = sustainable_power;
                params->sustainable_power = sustainable_power;
        }

        return sustainable_power;
}

/**
 * pid_controller() - PID controller
 * @tz: thermal zone we are operating in
 * @control_temp:       the target temperature in millicelsius
 * @max_allocatable_power:      maximum allocatable power for this thermal zone
 *
 * This PID controller increases the available power budget so that the
 * temperature of the thermal zone gets as close as possible to
 * @control_temp and limits the power if it exceeds it.  k_po is the
 * proportional term when we are overshooting, k_pu is the
 * proportional term when we are undershooting.  integral_cutoff is a
 * threshold below which we stop accumulating the error.  The
 * accumulated error is only valid if the requested power will make
 * the system warmer.  If the system is mostly idle, there's no point
 * in accumulating positive error.
 *
 * Return: The power budget for the next period.
 */
static u32 pid_controller(struct thermal_zone_device *tz,
                          int control_temp,
                          u32 max_allocatable_power)
{
        s64 p, i, d, power_range;
        s32 err, max_power_frac;
        u32 sustainable_power;
        struct power_allocator_params *params = tz->governor_data;

        max_power_frac = int_to_frac(max_allocatable_power);

        sustainable_power = get_sustainable_power(tz, params, control_temp);

        err = control_temp - tz->temperature;
        err = int_to_frac(err);

        /* Calculate the proportional term */
        p = mul_frac(err < 0 ? tz->tzp->k_po : tz->tzp->k_pu, err);

        /*
         * Calculate the integral term
         *
         * if the error is less than cut off allow integration (but
         * the integral is limited to max power)
         */
        i = mul_frac(tz->tzp->k_i, params->err_integral);

        if (err < int_to_frac(tz->tzp->integral_cutoff)) {
                s64 i_next = i + mul_frac(tz->tzp->k_i, err);

                if (abs(i_next) < max_power_frac) {
                        i = i_next;
                        params->err_integral += err;
                }
        }

        /*
         * Calculate the derivative term
         *
         * We do err - prev_err, so with a positive k_d, a decreasing
         * error (i.e. driving closer to the line) results in less
         * power being applied, slowing down the controller)
         */
        d = mul_frac(tz->tzp->k_d, err - params->prev_err);
        d = div_frac(d, tz->passive_delay);
        params->prev_err = err;

        power_range = p + i + d;

        /* feed-forward the known sustainable dissipatable power */
        power_range = sustainable_power + frac_to_int(power_range);

        power_range = clamp(power_range, (s64)0, (s64)max_allocatable_power);

        trace_thermal_power_allocator_pid(tz, frac_to_int(err),
                                          frac_to_int(params->err_integral),
                                          frac_to_int(p), frac_to_int(i),
                                          frac_to_int(d), power_range);

        return power_range;
}

/**
 * power_actor_set_power() - limit the maximum power a cooling device consumes
 * @cdev:       pointer to &thermal_cooling_device
 * @instance:   thermal instance to update
 * @power:      the power in milliwatts
 *
 * Set the cooling device to consume at most @power milliwatts. The limit is
 * expected to be a cap at the maximum power consumption.
 *
 * Return: 0 on success, -EINVAL if the cooling device does not
 * implement the power actor API or -E* for other failures.
 */
static int
power_actor_set_power(struct thermal_cooling_device *cdev,
                      struct thermal_instance *instance, u32 power)
{
        unsigned long state;
        int ret;

        ret = cdev->ops->power2state(cdev, power, &state);
        if (ret)
                return ret;

        instance->target = clamp_val(state, instance->lower, instance->upper);
        mutex_lock(&cdev->lock);
        cdev->updated = false;
        mutex_unlock(&cdev->lock);
        thermal_cdev_update(cdev);

        return 0;
}

/**
 * divvy_up_power() - divvy the allocated power between the actors
 * @req_power:  each actor's requested power
 * @max_power:  each actor's maximum available power
 * @num_actors: size of the @req_power, @max_power and @granted_power's array
 * @total_req_power: sum of @req_power
 * @power_range:        total allocated power
 * @granted_power:      output array: each actor's granted power
 * @extra_actor_power:  an appropriately sized array to be used in the
 *                      function as temporary storage of the extra power given
 *                      to the actors
 *
 * This function divides the total allocated power (@power_range)
 * fairly between the actors.  It first tries to give each actor a
 * share of the @power_range according to how much power it requested
 * compared to the rest of the actors.  For example, if only one actor
 * requests power, then it receives all the @power_range.  If
 * three actors each requests 1mW, each receives a third of the
 * @power_range.
 *
 * If any actor received more than their maximum power, then that
 * surplus is re-divvied among the actors based on how far they are
 * from their respective maximums.
 *
 * Granted power for each actor is written to @granted_power, which
 * should've been allocated by the calling function.
 */
static void divvy_up_power(u32 *req_power, u32 *max_power, int num_actors,
                           u32 total_req_power, u32 power_range,
                           u32 *granted_power, u32 *extra_actor_power)
{
        u32 extra_power, capped_extra_power;
        int i;

        /*
         * Prevent division by 0 if none of the actors request power.
         */
        if (!total_req_power)
                total_req_power = 1;

        capped_extra_power = 0;
        extra_power = 0;
        for (i = 0; i < num_actors; i++) {
                u64 req_range = (u64)req_power[i] * power_range;

                granted_power[i] = DIV_ROUND_CLOSEST_ULL(req_range,
                                                         total_req_power);

                if (granted_power[i] > max_power[i]) {
                        extra_power += granted_power[i] - max_power[i];
                        granted_power[i] = max_power[i];
                }

                extra_actor_power[i] = max_power[i] - granted_power[i];
                capped_extra_power += extra_actor_power[i];
        }

        if (!extra_power)
                return;

        /*
         * Re-divvy the reclaimed extra among actors based on
         * how far they are from the max
         */
        extra_power = min(extra_power, capped_extra_power);
        if (capped_extra_power > 0)
                for (i = 0; i < num_actors; i++)
                        granted_power[i] += (extra_actor_power[i] *
                                        extra_power) / capped_extra_power;
}

static int allocate_power(struct thermal_zone_device *tz,
                          int control_temp)
{
        struct thermal_instance *instance;
        struct power_allocator_params *params = tz->governor_data;
        u32 *req_power, *max_power, *granted_power, *extra_actor_power;
        u32 *weighted_req_power;
        u32 total_req_power, max_allocatable_power, total_weighted_req_power;
        u32 total_granted_power, power_range;
        int i, num_actors, total_weight, ret = 0;
        int trip_max_desired_temperature = params->trip_max_desired_temperature;

        mutex_lock(&tz->lock);

        num_actors = 0;
        total_weight = 0;
        list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
                if ((instance->trip == trip_max_desired_temperature) &&
                    cdev_is_power_actor(instance->cdev)) {
                        num_actors++;
                        total_weight += instance->weight;
                }
        }

        if (!num_actors) {
                ret = -ENODEV;
                goto unlock;
        }

        /*
         * We need to allocate five arrays of the same size:
         * req_power, max_power, granted_power, extra_actor_power and
         * weighted_req_power.  They are going to be needed until this
         * function returns.  Allocate them all in one go to simplify
         * the allocation and deallocation logic.
         */
        BUILD_BUG_ON(sizeof(*req_power) != sizeof(*max_power));
        BUILD_BUG_ON(sizeof(*req_power) != sizeof(*granted_power));
        BUILD_BUG_ON(sizeof(*req_power) != sizeof(*extra_actor_power));
        BUILD_BUG_ON(sizeof(*req_power) != sizeof(*weighted_req_power));
        req_power = kcalloc(num_actors * 5, sizeof(*req_power), GFP_KERNEL);
        if (!req_power) {
                ret = -ENOMEM;
                goto unlock;
        }

        max_power = &req_power[num_actors];
        granted_power = &req_power[2 * num_actors];
        extra_actor_power = &req_power[3 * num_actors];
        weighted_req_power = &req_power[4 * num_actors];

        i = 0;
        total_weighted_req_power = 0;
        total_req_power = 0;
        max_allocatable_power = 0;

        list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
                int weight;
                struct thermal_cooling_device *cdev = instance->cdev;

                if (instance->trip != trip_max_desired_temperature)
                        continue;

                if (!cdev_is_power_actor(cdev))
                        continue;

                if (cdev->ops->get_requested_power(cdev, &req_power[i]))
                        continue;

                if (!total_weight)
                        weight = 1 << FRAC_BITS;
                else
                        weight = instance->weight;

                weighted_req_power[i] = frac_to_int(weight * req_power[i]);

                if (cdev->ops->state2power(cdev, instance->lower,
                                           &max_power[i]))
                        continue;

                total_req_power += req_power[i];
                max_allocatable_power += max_power[i];
                total_weighted_req_power += weighted_req_power[i];

                i++;
        }

        power_range = pid_controller(tz, control_temp, max_allocatable_power);

        divvy_up_power(weighted_req_power, max_power, num_actors,
                       total_weighted_req_power, power_range, granted_power,
                       extra_actor_power);

        total_granted_power = 0;
        i = 0;
        list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
                if (instance->trip != trip_max_desired_temperature)
                        continue;

                if (!cdev_is_power_actor(instance->cdev))
                        continue;

                power_actor_set_power(instance->cdev, instance,
                                      granted_power[i]);
                total_granted_power += granted_power[i];

                i++;
        }

        trace_thermal_power_allocator(tz, req_power, total_req_power,
                                      granted_power, total_granted_power,
                                      num_actors, power_range,
                                      max_allocatable_power, tz->temperature,
                                      control_temp - tz->temperature);

        kfree(req_power);
unlock:
        mutex_unlock(&tz->lock);

        return ret;
}

/**
 * get_governor_trips() - get the number of the two trip points that are key for this governor
 * @tz: thermal zone to operate on
 * @params:     pointer to private data for this governor
 *
 * The power allocator governor works optimally with two trips points:
 * a "switch on" trip point and a "maximum desired temperature".  These
 * are defined as the first and last passive trip points.
 *
 * If there is only one trip point, then that's considered to be the
 * "maximum desired temperature" trip point and the governor is always
 * on.  If there are no passive or active trip points, then the
 * governor won't do anything.  In fact, its throttle function
 * won't be called at all.
 */
static void get_governor_trips(struct thermal_zone_device *tz,
                               struct power_allocator_params *params)
{
        int i, last_active, last_passive;
        bool found_first_passive;

        found_first_passive = false;
        last_active = INVALID_TRIP;
        last_passive = INVALID_TRIP;

        for (i = 0; i < tz->trips; i++) {
                enum thermal_trip_type type;
                int ret;

                ret = tz->ops->get_trip_type(tz, i, &type);
                if (ret) {
                        dev_warn(&tz->device,
                                 "Failed to get trip point %d type: %d\n", i,
                                 ret);
                        continue;
                }

                if (type == THERMAL_TRIP_PASSIVE) {
                        if (!found_first_passive) {
                                params->trip_switch_on = i;
                                found_first_passive = true;
                        } else  {
                                last_passive = i;
                        }
                } else if (type == THERMAL_TRIP_ACTIVE) {
                        last_active = i;
                } else {
                        break;
                }
        }

        if (last_passive != INVALID_TRIP) {
                params->trip_max_desired_temperature = last_passive;
        } else if (found_first_passive) {
                params->trip_max_desired_temperature = params->trip_switch_on;
                params->trip_switch_on = INVALID_TRIP;
        } else {
                params->trip_switch_on = INVALID_TRIP;
                params->trip_max_desired_temperature = last_active;
        }
}

static void reset_pid_controller(struct power_allocator_params *params)
{
        params->err_integral = 0;
        params->prev_err = 0;
}

static void allow_maximum_power(struct thermal_zone_device *tz)
{
        struct thermal_instance *instance;
        struct power_allocator_params *params = tz->governor_data;

        mutex_lock(&tz->lock);
        list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
                if ((instance->trip != params->trip_max_desired_temperature) ||
                    (!cdev_is_power_actor(instance->cdev)))
                        continue;

                instance->target = 0;
                mutex_lock(&instance->cdev->lock);
                instance->cdev->updated = false;
                mutex_unlock(&instance->cdev->lock);
                thermal_cdev_update(instance->cdev);
        }
        mutex_unlock(&tz->lock);
}

/**
 * power_allocator_bind() - bind the power_allocator governor to a thermal zone
 * @tz: thermal zone to bind it to
 *
 * Initialize the PID controller parameters and bind it to the thermal
 * zone.
 *
 * Return: 0 on success, or -ENOMEM if we ran out of memory.
 */
static int power_allocator_bind(struct thermal_zone_device *tz)
{
        int ret;
        struct power_allocator_params *params;
        int control_temp;

        params = kzalloc(sizeof(*params), GFP_KERNEL);
        if (!params)
                return -ENOMEM;

        if (!tz->tzp) {
                tz->tzp = kzalloc(sizeof(*tz->tzp), GFP_KERNEL);
                if (!tz->tzp) {
                        ret = -ENOMEM;
                        goto free_params;
                }

                params->allocated_tzp = true;
        }

        if (!tz->tzp->sustainable_power)
                dev_warn(&tz->device, "power_allocator: sustainable_power will be estimated\n");

        get_governor_trips(tz, params);

        if (tz->trips > 0) {
                ret = tz->ops->get_trip_temp(tz,
                                        params->trip_max_desired_temperature,
                                        &control_temp);
                if (!ret)
                        estimate_pid_constants(tz, tz->tzp->sustainable_power,
                                               params->trip_switch_on,
                                               control_temp);
        }

        reset_pid_controller(params);

        tz->governor_data = params;

        return 0;

free_params:
        kfree(params);

        return ret;
}

static void power_allocator_unbind(struct thermal_zone_device *tz)
{
        struct power_allocator_params *params = tz->governor_data;

        dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);

        if (params->allocated_tzp) {
                kfree(tz->tzp);
                tz->tzp = NULL;
        }

        kfree(tz->governor_data);
        tz->governor_data = NULL;
}

static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
{
        int ret;
        int switch_on_temp, control_temp;
        struct power_allocator_params *params = tz->governor_data;

        /*
         * We get called for every trip point but we only need to do
         * our calculations once
         */
        if (trip != params->trip_max_desired_temperature)
                return 0;

        ret = tz->ops->get_trip_temp(tz, params->trip_switch_on,
                                     &switch_on_temp);
        if (!ret && (tz->temperature < switch_on_temp)) {
                tz->passive = 0;
                reset_pid_controller(params);
                allow_maximum_power(tz);
                return 0;
        }

        tz->passive = 1;

        ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature,
                                &control_temp);
        if (ret) {
                dev_warn(&tz->device,
                         "Failed to get the maximum desired temperature: %d\n",
                         ret);
                return ret;
        }

        return allocate_power(tz, control_temp);
}

static struct thermal_governor thermal_gov_power_allocator = {
        .name           = "power_allocator",
        .bind_to_tz     = power_allocator_bind,
        .unbind_from_tz = power_allocator_unbind,
        .throttle       = power_allocator_throttle,
};
THERMAL_GOVERNOR_DECLARE(thermal_gov_power_allocator);