drivers/tty/serial/8250/8250_em.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Renesas Emma Mobile 8250 driver
   4  *
   5  *  Copyright (C) 2012 Magnus Damm
   6  */
   7
   8 #include <linux/device.h>
   9 #include <linux/io.h>
  10 #include <linux/module.h>
  11 #include <linux/mod_devicetable.h>
  12 #include <linux/serial_8250.h>
  13 #include <linux/serial_reg.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/clk.h>
  16 #include <linux/slab.h>
  17
  18 #include "8250.h"
  19
  20 #define UART_DLL_EM 9
  21 #define UART_DLM_EM 10
  22
  23 struct serial8250_em_priv {
  24         struct clk *sclk;
  25         int line;
  26 };
  27
  28 static void serial8250_em_serial_out(struct uart_port *p, int offset, int value)
  29 {
  30         switch (offset) {
  31         case UART_TX: /* TX @ 0x00 */
  32                 writeb(value, p->membase);
  33                 break;
  34         case UART_FCR: /* FCR @ 0x0c (+1) */
  35         case UART_LCR: /* LCR @ 0x10 (+1) */
  36         case UART_MCR: /* MCR @ 0x14 (+1) */
  37         case UART_SCR: /* SCR @ 0x20 (+1) */
  38                 writel(value, p->membase + ((offset + 1) << 2));
  39                 break;
  40         case UART_IER: /* IER @ 0x04 */
  41                 value &= 0x0f; /* only 4 valid bits - not Xscale */
  42                 fallthrough;
  43         case UART_DLL_EM: /* DLL @ 0x24 (+9) */
  44         case UART_DLM_EM: /* DLM @ 0x28 (+9) */
  45                 writel(value, p->membase + (offset << 2));
  46         }
  47 }
  48
  49 static unsigned int serial8250_em_serial_in(struct uart_port *p, int offset)
  50 {
  51         switch (offset) {
  52         case UART_RX: /* RX @ 0x00 */
  53                 return readb(p->membase);
  54         case UART_MCR: /* MCR @ 0x14 (+1) */
  55         case UART_LSR: /* LSR @ 0x18 (+1) */
  56         case UART_MSR: /* MSR @ 0x1c (+1) */
  57         case UART_SCR: /* SCR @ 0x20 (+1) */
  58                 return readl(p->membase + ((offset + 1) << 2));
  59         case UART_IER: /* IER @ 0x04 */
  60         case UART_IIR: /* IIR @ 0x08 */
  61         case UART_DLL_EM: /* DLL @ 0x24 (+9) */
  62         case UART_DLM_EM: /* DLM @ 0x28 (+9) */
  63                 return readl(p->membase + (offset << 2));
  64         }
  65         return 0;
  66 }
  67
  68 static int serial8250_em_serial_dl_read(struct uart_8250_port *up)
  69 {
  70         return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8;
  71 }
  72
  73 static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value)
  74 {
  75         serial_out(up, UART_DLL_EM, value & 0xff);
  76         serial_out(up, UART_DLM_EM, value >> 8 & 0xff);
  77 }
  78
  79 static int serial8250_em_probe(struct platform_device *pdev)
  80 {
  81         struct serial8250_em_priv *priv;
  82         struct uart_8250_port up;
  83         struct resource *regs;
  84         int irq, ret;
  85
  86         irq = platform_get_irq(pdev, 0);
  87         if (irq < 0)
  88                 return irq;
  89
  90         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  91         if (!regs) {
  92                 dev_err(&pdev->dev, "missing registers\n");
  93                 return -EINVAL;
  94         }
  95
  96         priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
  97         if (!priv)
  98                 return -ENOMEM;
  99
 100         priv->sclk = devm_clk_get(&pdev->dev, "sclk");
 101         if (IS_ERR(priv->sclk)) {
 102                 dev_err(&pdev->dev, "unable to get clock\n");
 103                 return PTR_ERR(priv->sclk);
 104         }
 105
 106         memset(&up, 0, sizeof(up));
 107         up.port.mapbase = regs->start;
 108         up.port.irq = irq;
 109         up.port.type = PORT_UNKNOWN;
 110         up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
 111         up.port.dev = &pdev->dev;
 112         up.port.private_data = priv;
 113
 114         clk_prepare_enable(priv->sclk);
 115         up.port.uartclk = clk_get_rate(priv->sclk);
 116
 117         up.port.iotype = UPIO_MEM32;
 118         up.port.serial_in = serial8250_em_serial_in;
 119         up.port.serial_out = serial8250_em_serial_out;
 120         up.dl_read = serial8250_em_serial_dl_read;
 121         up.dl_write = serial8250_em_serial_dl_write;
 122
 123         ret = serial8250_register_8250_port(&up);
 124         if (ret < 0) {
 125                 dev_err(&pdev->dev, "unable to register 8250 port\n");
 126                 clk_disable_unprepare(priv->sclk);
 127                 return ret;
 128         }
 129
 130         priv->line = ret;
 131         platform_set_drvdata(pdev, priv);
 132         return 0;
 133 }
 134
 135 static int serial8250_em_remove(struct platform_device *pdev)
 136 {
 137         struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
 138
 139         serial8250_unregister_port(priv->line);
 140         clk_disable_unprepare(priv->sclk);
 141         return 0;
 142 }
 143
 144 static const struct of_device_id serial8250_em_dt_ids[] = {
 145         { .compatible = "renesas,em-uart", },
 146         {},
 147 };
 148 MODULE_DEVICE_TABLE(of, serial8250_em_dt_ids);
 149
 150 static struct platform_driver serial8250_em_platform_driver = {
 151         .driver = {
 152                 .name           = "serial8250-em",
 153                 .of_match_table = serial8250_em_dt_ids,
 154         },
 155         .probe                  = serial8250_em_probe,
 156         .remove                 = serial8250_em_remove,
 157 };
 158
 159 module_platform_driver(serial8250_em_platform_driver);
 160
 161 MODULE_AUTHOR("Magnus Damm");
 162 MODULE_DESCRIPTION("Renesas Emma Mobile 8250 Driver");
 163 MODULE_LICENSE("GPL v2");