WIP FPC-III support
[linux/fpc-iii.git] / drivers / tty / serial / cpm_uart / cpm_uart.h
blob6113b953ce25063a7fd61d2f843d6d8aa0375687
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * Driver for CPM (SCC/SMC) serial ports
5 * Copyright (C) 2004 Freescale Semiconductor, Inc.
7 * 2006 (c) MontaVista Software, Inc.
8 * Vitaly Bordug <vbordug@ru.mvista.com>
9 */
10 #ifndef CPM_UART_H
11 #define CPM_UART_H
13 #include <linux/platform_device.h>
14 #include <linux/fs_uart_pd.h>
16 struct gpio_desc;
18 #if defined(CONFIG_CPM2)
19 #include "cpm_uart_cpm2.h"
20 #elif defined(CONFIG_CPM1)
21 #include "cpm_uart_cpm1.h"
22 #endif
24 #define SERIAL_CPM_MAJOR 204
25 #define SERIAL_CPM_MINOR 46
27 #define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC)
28 #define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING)
29 #define FLAG_DISCARDING 0x00000004 /* when set, don't discard */
30 #define FLAG_SMC 0x00000002
31 #define FLAG_CONSOLE 0x00000001
33 #define UART_SMC1 fsid_smc1_uart
34 #define UART_SMC2 fsid_smc2_uart
35 #define UART_SCC1 fsid_scc1_uart
36 #define UART_SCC2 fsid_scc2_uart
37 #define UART_SCC3 fsid_scc3_uart
38 #define UART_SCC4 fsid_scc4_uart
40 #define UART_NR fs_uart_nr
42 #define RX_NUM_FIFO 4
43 #define RX_BUF_SIZE 32
44 #define TX_NUM_FIFO 4
45 #define TX_BUF_SIZE 32
47 #define SCC_WAIT_CLOSING 100
49 #define GPIO_CTS 0
50 #define GPIO_RTS 1
51 #define GPIO_DCD 2
52 #define GPIO_DSR 3
53 #define GPIO_DTR 4
54 #define GPIO_RI 5
56 #define NUM_GPIOS (GPIO_RI+1)
58 struct uart_cpm_port {
59 struct uart_port port;
60 u16 rx_nrfifos;
61 u16 rx_fifosize;
62 u16 tx_nrfifos;
63 u16 tx_fifosize;
64 smc_t __iomem *smcp;
65 smc_uart_t __iomem *smcup;
66 scc_t __iomem *sccp;
67 scc_uart_t __iomem *sccup;
68 cbd_t __iomem *rx_bd_base;
69 cbd_t __iomem *rx_cur;
70 cbd_t __iomem *tx_bd_base;
71 cbd_t __iomem *tx_cur;
72 unsigned char *tx_buf;
73 unsigned char *rx_buf;
74 u32 flags;
75 struct clk *clk;
76 u8 brg;
77 uint dp_addr;
78 void *mem_addr;
79 dma_addr_t dma_addr;
80 u32 mem_size;
81 /* wait on close if needed */
82 int wait_closing;
83 /* value to combine with opcode to form cpm command */
84 u32 command;
85 struct gpio_desc *gpios[NUM_GPIOS];
88 extern int cpm_uart_nr;
89 extern struct uart_cpm_port cpm_uart_ports[UART_NR];
91 /* these are located in their respective files */
92 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
93 void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
94 struct device_node *np);
95 void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram);
96 int cpm_uart_init_portdesc(void);
97 int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
98 void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
100 void smc1_lineif(struct uart_cpm_port *pinfo);
101 void smc2_lineif(struct uart_cpm_port *pinfo);
102 void scc1_lineif(struct uart_cpm_port *pinfo);
103 void scc2_lineif(struct uart_cpm_port *pinfo);
104 void scc3_lineif(struct uart_cpm_port *pinfo);
105 void scc4_lineif(struct uart_cpm_port *pinfo);
108 virtual to phys transtalion
110 static inline unsigned long cpu2cpm_addr(void *addr,
111 struct uart_cpm_port *pinfo)
113 int offset;
114 u32 val = (u32)addr;
115 u32 mem = (u32)pinfo->mem_addr;
116 /* sane check */
117 if (likely(val >= mem && val < mem + pinfo->mem_size)) {
118 offset = val - mem;
119 return pinfo->dma_addr + offset;
121 /* something nasty happened */
122 BUG();
123 return 0;
126 static inline void *cpm2cpu_addr(unsigned long addr,
127 struct uart_cpm_port *pinfo)
129 int offset;
130 u32 val = addr;
131 u32 dma = (u32)pinfo->dma_addr;
132 /* sane check */
133 if (likely(val >= dma && val < dma + pinfo->mem_size)) {
134 offset = val - dma;
135 return pinfo->mem_addr + offset;
137 /* something nasty happened */
138 BUG();
139 return NULL;
143 #endif /* CPM_UART_H */