1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3 * f_mass_storage.c -- Mass Storage USB Composite Function
5 * Copyright (C) 2003-2008 Alan Stern
6 * Copyright (C) 2009 Samsung Electronics
7 * Author: Michal Nazarewicz <mina86@mina86.com>
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. The names of the above-listed copyright holders may not be used
20 * to endorse or promote products derived from this software without
21 * specific prior written permission.
23 * ALTERNATIVELY, this software may be distributed under the terms of the
24 * GNU General Public License ("GPL") as published by the Free Software
25 * Foundation, either version 2 of that License or (at your option) any
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
29 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
30 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
31 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
32 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
33 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
34 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
35 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
36 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
37 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
38 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
42 * The Mass Storage Function acts as a USB Mass Storage device,
43 * appearing to the host as a disk drive or as a CD-ROM drive. In
44 * addition to providing an example of a genuinely useful composite
45 * function for a USB device, it also illustrates a technique of
46 * double-buffering for increased throughput.
48 * For more information about MSF and in particular its module
49 * parameters and sysfs interface read the
50 * <Documentation/usb/mass-storage.rst> file.
54 * MSF is configured by specifying a fsg_config structure. It has the
57 * nluns Number of LUNs function have (anywhere from 1
59 * luns An array of LUN configuration values. This
60 * should be filled for each LUN that
61 * function will include (ie. for "nluns"
62 * LUNs). Each element of the array has
63 * the following fields:
64 * ->filename The path to the backing file for the LUN.
65 * Required if LUN is not marked as
67 * ->ro Flag specifying access to the LUN shall be
68 * read-only. This is implied if CD-ROM
69 * emulation is enabled as well as when
70 * it was impossible to open "filename"
72 * ->removable Flag specifying that LUN shall be indicated as
74 * ->cdrom Flag specifying that LUN shall be reported as
76 * ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12)
77 * commands for this LUN shall be ignored.
81 * release Information used as a reply to INQUIRY
82 * request. To use default set to NULL,
83 * NULL, 0xffff respectively. The first
84 * field should be 8 and the second 16
87 * can_stall Set to permit function to halt bulk endpoints.
88 * Disabled on some USB devices known not
89 * to work correctly. You should set it
92 * If "removable" is not set for a LUN then a backing file must be
93 * specified. If it is set, then NULL filename means the LUN's medium
94 * is not loaded (an empty string as "filename" in the fsg_config
95 * structure causes error). The CD-ROM emulation includes a single
96 * data track and no audio tracks; hence there need be only one
97 * backing file per LUN.
99 * This function is heavily based on "File-backed Storage Gadget" by
100 * Alan Stern which in turn is heavily based on "Gadget Zero" by David
101 * Brownell. The driver's SCSI command interface was based on the
102 * "Information technology - Small Computer System Interface - 2"
103 * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
104 * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
105 * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
106 * was based on the "Universal Serial Bus Mass Storage Class UFI
107 * Command Specification" document, Revision 1.0, December 14, 1998,
109 * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
115 * The MSF is fairly straightforward. There is a main kernel
116 * thread that handles most of the work. Interrupt routines field
117 * callbacks from the controller driver: bulk- and interrupt-request
118 * completion notifications, endpoint-0 events, and disconnect events.
119 * Completion events are passed to the main thread by wakeup calls. Many
120 * ep0 requests are handled at interrupt time, but SetInterface,
121 * SetConfiguration, and device reset requests are forwarded to the
122 * thread in the form of "exceptions" using SIGUSR1 signals (since they
123 * should interrupt any ongoing file I/O operations).
125 * The thread's main routine implements the standard command/data/status
126 * parts of a SCSI interaction. It and its subroutines are full of tests
127 * for pending signals/exceptions -- all this polling is necessary since
128 * the kernel has no setjmp/longjmp equivalents. (Maybe this is an
129 * indication that the driver really wants to be running in userspace.)
130 * An important point is that so long as the thread is alive it keeps an
131 * open reference to the backing file. This will prevent unmounting
132 * the backing file's underlying filesystem and could cause problems
133 * during system shutdown, for example. To prevent such problems, the
134 * thread catches INT, TERM, and KILL signals and converts them into
137 * In normal operation the main thread is started during the gadget's
138 * fsg_bind() callback and stopped during fsg_unbind(). But it can
139 * also exit when it receives a signal, and there's no point leaving
140 * the gadget running when the thread is dead. As of this moment, MSF
141 * provides no way to deregister the gadget when thread dies -- maybe
142 * a callback functions is needed.
144 * To provide maximum throughput, the driver uses a circular pipeline of
145 * buffer heads (struct fsg_buffhd). In principle the pipeline can be
146 * arbitrarily long; in practice the benefits don't justify having more
147 * than 2 stages (i.e., double buffering). But it helps to think of the
148 * pipeline as being a long one. Each buffer head contains a bulk-in and
149 * a bulk-out request pointer (since the buffer can be used for both
150 * output and input -- directions always are given from the host's
151 * point of view) as well as a pointer to the buffer and various state
154 * Use of the pipeline follows a simple protocol. There is a variable
155 * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
156 * At any time that buffer head may still be in use from an earlier
157 * request, so each buffer head has a state variable indicating whether
158 * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the
159 * buffer head to be EMPTY, filling the buffer either by file I/O or by
160 * USB I/O (during which the buffer head is BUSY), and marking the buffer
161 * head FULL when the I/O is complete. Then the buffer will be emptied
162 * (again possibly by USB I/O, during which it is marked BUSY) and
163 * finally marked EMPTY again (possibly by a completion routine).
165 * A module parameter tells the driver to avoid stalling the bulk
166 * endpoints wherever the transport specification allows. This is
167 * necessary for some UDCs like the SuperH, which cannot reliably clear a
168 * halt on a bulk endpoint. However, under certain circumstances the
169 * Bulk-only specification requires a stall. In such cases the driver
170 * will halt the endpoint and set a flag indicating that it should clear
171 * the halt in software during the next device reset. Hopefully this
172 * will permit everything to work correctly. Furthermore, although the
173 * specification allows the bulk-out endpoint to halt when the host sends
174 * too much data, implementing this would cause an unavoidable race.
175 * The driver will always use the "no-stall" approach for OUT transfers.
177 * One subtle point concerns sending status-stage responses for ep0
178 * requests. Some of these requests, such as device reset, can involve
179 * interrupting an ongoing file I/O operation, which might take an
180 * arbitrarily long time. During that delay the host might give up on
181 * the original ep0 request and issue a new one. When that happens the
182 * driver should not notify the host about completion of the original
183 * request, as the host will no longer be waiting for it. So the driver
184 * assigns to each ep0 request a unique tag, and it keeps track of the
185 * tag value of the request associated with a long-running exception
186 * (device-reset, interface-change, or configuration-change). When the
187 * exception handler is finished, the status-stage response is submitted
188 * only if the current ep0 request tag is equal to the exception request
189 * tag. Thus only the most recently received ep0 request will get a
190 * status-stage response.
192 * Warning: This driver source file is too long. It ought to be split up
193 * into a header file plus about 3 separate .c files, to handle the details
194 * of the Gadget, USB Mass Storage, and SCSI protocols.
198 /* #define VERBOSE_DEBUG */
199 /* #define DUMP_MSGS */
201 #include <linux/blkdev.h>
202 #include <linux/completion.h>
203 #include <linux/dcache.h>
204 #include <linux/delay.h>
205 #include <linux/device.h>
206 #include <linux/fcntl.h>
207 #include <linux/file.h>
208 #include <linux/fs.h>
209 #include <linux/kthread.h>
210 #include <linux/sched/signal.h>
211 #include <linux/limits.h>
212 #include <linux/rwsem.h>
213 #include <linux/slab.h>
214 #include <linux/spinlock.h>
215 #include <linux/string.h>
216 #include <linux/freezer.h>
217 #include <linux/module.h>
218 #include <linux/uaccess.h>
219 #include <asm/unaligned.h>
221 #include <linux/usb/ch9.h>
222 #include <linux/usb/gadget.h>
223 #include <linux/usb/composite.h>
225 #include <linux/nospec.h>
227 #include "configfs.h"
230 /*------------------------------------------------------------------------*/
232 #define FSG_DRIVER_DESC "Mass Storage Function"
233 #define FSG_DRIVER_VERSION "2009/09/11"
235 static const char fsg_string_interface
[] = "Mass Storage";
237 #include "storage_common.h"
238 #include "f_mass_storage.h"
240 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
241 static struct usb_string fsg_strings
[] = {
242 {FSG_STRING_INTERFACE
, fsg_string_interface
},
246 static struct usb_gadget_strings fsg_stringtab
= {
247 .language
= 0x0409, /* en-us */
248 .strings
= fsg_strings
,
251 static struct usb_gadget_strings
*fsg_strings_array
[] = {
256 /*-------------------------------------------------------------------------*/
261 /* Data shared by all the FSG instances. */
263 struct usb_gadget
*gadget
;
264 struct usb_composite_dev
*cdev
;
266 wait_queue_head_t io_wait
;
267 wait_queue_head_t fsg_wait
;
269 /* filesem protects: backing files in use */
270 struct rw_semaphore filesem
;
272 /* lock protects: state and thread_task */
275 struct usb_ep
*ep0
; /* Copy of gadget->ep0 */
276 struct usb_request
*ep0req
; /* Copy of cdev->req */
277 unsigned int ep0_req_tag
;
279 struct fsg_buffhd
*next_buffhd_to_fill
;
280 struct fsg_buffhd
*next_buffhd_to_drain
;
281 struct fsg_buffhd
*buffhds
;
282 unsigned int fsg_num_buffers
;
285 u8 cmnd
[MAX_COMMAND_SIZE
];
288 struct fsg_lun
*luns
[FSG_MAX_LUNS
];
289 struct fsg_lun
*curlun
;
291 unsigned int bulk_out_maxpacket
;
292 enum fsg_state state
; /* For exception handling */
293 unsigned int exception_req_tag
;
296 enum data_direction data_dir
;
298 u32 data_size_from_cmnd
;
303 unsigned int can_stall
:1;
304 unsigned int free_storage_on_release
:1;
305 unsigned int phase_error
:1;
306 unsigned int short_packet_received
:1;
307 unsigned int bad_lun_okay
:1;
308 unsigned int running
:1;
309 unsigned int sysfs
:1;
311 struct completion thread_notifier
;
312 struct task_struct
*thread_task
;
314 /* Gadget's private data. */
317 char inquiry_string
[INQUIRY_STRING_LEN
];
321 struct usb_function function
;
322 struct usb_gadget
*gadget
; /* Copy of cdev->gadget */
323 struct fsg_common
*common
;
325 u16 interface_number
;
327 unsigned int bulk_in_enabled
:1;
328 unsigned int bulk_out_enabled
:1;
330 unsigned long atomic_bitflags
;
331 #define IGNORE_BULK_OUT 0
333 struct usb_ep
*bulk_in
;
334 struct usb_ep
*bulk_out
;
337 static inline int __fsg_is_set(struct fsg_common
*common
,
338 const char *func
, unsigned line
)
342 ERROR(common
, "common->fsg is NULL in %s at %u\n", func
, line
);
347 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
349 static inline struct fsg_dev
*fsg_from_func(struct usb_function
*f
)
351 return container_of(f
, struct fsg_dev
, function
);
354 typedef void (*fsg_routine_t
)(struct fsg_dev
*);
356 static int exception_in_progress(struct fsg_common
*common
)
358 return common
->state
> FSG_STATE_NORMAL
;
361 /* Make bulk-out requests be divisible by the maxpacket size */
362 static void set_bulk_out_req_length(struct fsg_common
*common
,
363 struct fsg_buffhd
*bh
, unsigned int length
)
367 bh
->bulk_out_intended_length
= length
;
368 rem
= length
% common
->bulk_out_maxpacket
;
370 length
+= common
->bulk_out_maxpacket
- rem
;
371 bh
->outreq
->length
= length
;
375 /*-------------------------------------------------------------------------*/
377 static int fsg_set_halt(struct fsg_dev
*fsg
, struct usb_ep
*ep
)
381 if (ep
== fsg
->bulk_in
)
383 else if (ep
== fsg
->bulk_out
)
387 DBG(fsg
, "%s set halt\n", name
);
388 return usb_ep_set_halt(ep
);
392 /*-------------------------------------------------------------------------*/
394 /* These routines may be called in process context or in_irq */
396 static void __raise_exception(struct fsg_common
*common
, enum fsg_state new_state
,
402 * Do nothing if a higher-priority exception is already in progress.
403 * If a lower-or-equal priority exception is in progress, preempt it
404 * and notify the main thread by sending it a signal.
406 spin_lock_irqsave(&common
->lock
, flags
);
407 if (common
->state
<= new_state
) {
408 common
->exception_req_tag
= common
->ep0_req_tag
;
409 common
->state
= new_state
;
410 common
->exception_arg
= arg
;
411 if (common
->thread_task
)
412 send_sig_info(SIGUSR1
, SEND_SIG_PRIV
,
413 common
->thread_task
);
415 spin_unlock_irqrestore(&common
->lock
, flags
);
418 static void raise_exception(struct fsg_common
*common
, enum fsg_state new_state
)
420 __raise_exception(common
, new_state
, NULL
);
423 /*-------------------------------------------------------------------------*/
425 static int ep0_queue(struct fsg_common
*common
)
429 rc
= usb_ep_queue(common
->ep0
, common
->ep0req
, GFP_ATOMIC
);
430 common
->ep0
->driver_data
= common
;
431 if (rc
!= 0 && rc
!= -ESHUTDOWN
) {
432 /* We can't do much more than wait for a reset */
433 WARNING(common
, "error in submission: %s --> %d\n",
434 common
->ep0
->name
, rc
);
440 /*-------------------------------------------------------------------------*/
442 /* Completion handlers. These always run in_irq. */
444 static void bulk_in_complete(struct usb_ep
*ep
, struct usb_request
*req
)
446 struct fsg_common
*common
= ep
->driver_data
;
447 struct fsg_buffhd
*bh
= req
->context
;
449 if (req
->status
|| req
->actual
!= req
->length
)
450 DBG(common
, "%s --> %d, %u/%u\n", __func__
,
451 req
->status
, req
->actual
, req
->length
);
452 if (req
->status
== -ECONNRESET
) /* Request was cancelled */
453 usb_ep_fifo_flush(ep
);
455 /* Synchronize with the smp_load_acquire() in sleep_thread() */
456 smp_store_release(&bh
->state
, BUF_STATE_EMPTY
);
457 wake_up(&common
->io_wait
);
460 static void bulk_out_complete(struct usb_ep
*ep
, struct usb_request
*req
)
462 struct fsg_common
*common
= ep
->driver_data
;
463 struct fsg_buffhd
*bh
= req
->context
;
465 dump_msg(common
, "bulk-out", req
->buf
, req
->actual
);
466 if (req
->status
|| req
->actual
!= bh
->bulk_out_intended_length
)
467 DBG(common
, "%s --> %d, %u/%u\n", __func__
,
468 req
->status
, req
->actual
, bh
->bulk_out_intended_length
);
469 if (req
->status
== -ECONNRESET
) /* Request was cancelled */
470 usb_ep_fifo_flush(ep
);
472 /* Synchronize with the smp_load_acquire() in sleep_thread() */
473 smp_store_release(&bh
->state
, BUF_STATE_FULL
);
474 wake_up(&common
->io_wait
);
477 static int _fsg_common_get_max_lun(struct fsg_common
*common
)
479 int i
= ARRAY_SIZE(common
->luns
) - 1;
481 while (i
>= 0 && !common
->luns
[i
])
487 static int fsg_setup(struct usb_function
*f
,
488 const struct usb_ctrlrequest
*ctrl
)
490 struct fsg_dev
*fsg
= fsg_from_func(f
);
491 struct usb_request
*req
= fsg
->common
->ep0req
;
492 u16 w_index
= le16_to_cpu(ctrl
->wIndex
);
493 u16 w_value
= le16_to_cpu(ctrl
->wValue
);
494 u16 w_length
= le16_to_cpu(ctrl
->wLength
);
496 if (!fsg_is_set(fsg
->common
))
499 ++fsg
->common
->ep0_req_tag
; /* Record arrival of a new request */
502 dump_msg(fsg
, "ep0-setup", (u8
*) ctrl
, sizeof(*ctrl
));
504 switch (ctrl
->bRequest
) {
506 case US_BULK_RESET_REQUEST
:
507 if (ctrl
->bRequestType
!=
508 (USB_DIR_OUT
| USB_TYPE_CLASS
| USB_RECIP_INTERFACE
))
510 if (w_index
!= fsg
->interface_number
|| w_value
!= 0 ||
515 * Raise an exception to stop the current operation
516 * and reinitialize our state.
518 DBG(fsg
, "bulk reset request\n");
519 raise_exception(fsg
->common
, FSG_STATE_PROTOCOL_RESET
);
520 return USB_GADGET_DELAYED_STATUS
;
522 case US_BULK_GET_MAX_LUN
:
523 if (ctrl
->bRequestType
!=
524 (USB_DIR_IN
| USB_TYPE_CLASS
| USB_RECIP_INTERFACE
))
526 if (w_index
!= fsg
->interface_number
|| w_value
!= 0 ||
529 VDBG(fsg
, "get max LUN\n");
530 *(u8
*)req
->buf
= _fsg_common_get_max_lun(fsg
->common
);
532 /* Respond with data/status */
533 req
->length
= min((u16
)1, w_length
);
534 return ep0_queue(fsg
->common
);
538 "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
539 ctrl
->bRequestType
, ctrl
->bRequest
,
540 le16_to_cpu(ctrl
->wValue
), w_index
, w_length
);
545 /*-------------------------------------------------------------------------*/
547 /* All the following routines run in process context */
549 /* Use this for bulk or interrupt transfers, not ep0 */
550 static int start_transfer(struct fsg_dev
*fsg
, struct usb_ep
*ep
,
551 struct usb_request
*req
)
555 if (ep
== fsg
->bulk_in
)
556 dump_msg(fsg
, "bulk-in", req
->buf
, req
->length
);
558 rc
= usb_ep_queue(ep
, req
, GFP_KERNEL
);
561 /* We can't do much more than wait for a reset */
565 * Note: currently the net2280 driver fails zero-length
566 * submissions if DMA is enabled.
568 if (rc
!= -ESHUTDOWN
&&
569 !(rc
== -EOPNOTSUPP
&& req
->length
== 0))
570 WARNING(fsg
, "error in submission: %s --> %d\n",
576 static bool start_in_transfer(struct fsg_common
*common
, struct fsg_buffhd
*bh
)
578 if (!fsg_is_set(common
))
580 bh
->state
= BUF_STATE_SENDING
;
581 if (start_transfer(common
->fsg
, common
->fsg
->bulk_in
, bh
->inreq
))
582 bh
->state
= BUF_STATE_EMPTY
;
586 static bool start_out_transfer(struct fsg_common
*common
, struct fsg_buffhd
*bh
)
588 if (!fsg_is_set(common
))
590 bh
->state
= BUF_STATE_RECEIVING
;
591 if (start_transfer(common
->fsg
, common
->fsg
->bulk_out
, bh
->outreq
))
592 bh
->state
= BUF_STATE_FULL
;
596 static int sleep_thread(struct fsg_common
*common
, bool can_freeze
,
597 struct fsg_buffhd
*bh
)
601 /* Wait until a signal arrives or bh is no longer busy */
604 * synchronize with the smp_store_release(&bh->state) in
605 * bulk_in_complete() or bulk_out_complete()
607 rc
= wait_event_freezable(common
->io_wait
,
608 bh
&& smp_load_acquire(&bh
->state
) >=
611 rc
= wait_event_interruptible(common
->io_wait
,
612 bh
&& smp_load_acquire(&bh
->state
) >=
614 return rc
? -EINTR
: 0;
618 /*-------------------------------------------------------------------------*/
620 static int do_read(struct fsg_common
*common
)
622 struct fsg_lun
*curlun
= common
->curlun
;
624 struct fsg_buffhd
*bh
;
627 loff_t file_offset
, file_offset_tmp
;
632 * Get the starting Logical Block Address and check that it's
635 if (common
->cmnd
[0] == READ_6
)
636 lba
= get_unaligned_be24(&common
->cmnd
[1]);
638 lba
= get_unaligned_be32(&common
->cmnd
[2]);
641 * We allow DPO (Disable Page Out = don't save data in the
642 * cache) and FUA (Force Unit Access = don't read from the
643 * cache), but we don't implement them.
645 if ((common
->cmnd
[1] & ~0x18) != 0) {
646 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
650 if (lba
>= curlun
->num_sectors
) {
651 curlun
->sense_data
= SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE
;
654 file_offset
= ((loff_t
) lba
) << curlun
->blkbits
;
656 /* Carry out the file reads */
657 amount_left
= common
->data_size_from_cmnd
;
658 if (unlikely(amount_left
== 0))
659 return -EIO
; /* No default reply */
663 * Figure out how much we need to read:
664 * Try to read the remaining amount.
665 * But don't read more than the buffer size.
666 * And don't try to read past the end of the file.
668 amount
= min(amount_left
, FSG_BUFLEN
);
669 amount
= min((loff_t
)amount
,
670 curlun
->file_length
- file_offset
);
672 /* Wait for the next buffer to become available */
673 bh
= common
->next_buffhd_to_fill
;
674 rc
= sleep_thread(common
, false, bh
);
679 * If we were asked to read past the end of file,
680 * end with an empty buffer.
684 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE
;
685 curlun
->sense_data_info
=
686 file_offset
>> curlun
->blkbits
;
687 curlun
->info_valid
= 1;
688 bh
->inreq
->length
= 0;
689 bh
->state
= BUF_STATE_FULL
;
693 /* Perform the read */
694 file_offset_tmp
= file_offset
;
695 nread
= kernel_read(curlun
->filp
, bh
->buf
, amount
,
697 VLDBG(curlun
, "file read %u @ %llu -> %d\n", amount
,
698 (unsigned long long)file_offset
, (int)nread
);
699 if (signal_pending(current
))
703 LDBG(curlun
, "error in file read: %d\n", (int)nread
);
705 } else if (nread
< amount
) {
706 LDBG(curlun
, "partial file read: %d/%u\n",
708 nread
= round_down(nread
, curlun
->blksize
);
710 file_offset
+= nread
;
711 amount_left
-= nread
;
712 common
->residue
-= nread
;
715 * Except at the end of the transfer, nread will be
716 * equal to the buffer size, which is divisible by the
717 * bulk-in maxpacket size.
719 bh
->inreq
->length
= nread
;
720 bh
->state
= BUF_STATE_FULL
;
722 /* If an error occurred, report it and its position */
723 if (nread
< amount
) {
724 curlun
->sense_data
= SS_UNRECOVERED_READ_ERROR
;
725 curlun
->sense_data_info
=
726 file_offset
>> curlun
->blkbits
;
727 curlun
->info_valid
= 1;
731 if (amount_left
== 0)
732 break; /* No more left to read */
734 /* Send this buffer and go read some more */
736 if (!start_in_transfer(common
, bh
))
737 /* Don't know what to do if common->fsg is NULL */
739 common
->next_buffhd_to_fill
= bh
->next
;
742 return -EIO
; /* No default reply */
746 /*-------------------------------------------------------------------------*/
748 static int do_write(struct fsg_common
*common
)
750 struct fsg_lun
*curlun
= common
->curlun
;
752 struct fsg_buffhd
*bh
;
754 u32 amount_left_to_req
, amount_left_to_write
;
755 loff_t usb_offset
, file_offset
, file_offset_tmp
;
761 curlun
->sense_data
= SS_WRITE_PROTECTED
;
764 spin_lock(&curlun
->filp
->f_lock
);
765 curlun
->filp
->f_flags
&= ~O_SYNC
; /* Default is not to wait */
766 spin_unlock(&curlun
->filp
->f_lock
);
769 * Get the starting Logical Block Address and check that it's
772 if (common
->cmnd
[0] == WRITE_6
)
773 lba
= get_unaligned_be24(&common
->cmnd
[1]);
775 lba
= get_unaligned_be32(&common
->cmnd
[2]);
778 * We allow DPO (Disable Page Out = don't save data in the
779 * cache) and FUA (Force Unit Access = write directly to the
780 * medium). We don't implement DPO; we implement FUA by
781 * performing synchronous output.
783 if (common
->cmnd
[1] & ~0x18) {
784 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
787 if (!curlun
->nofua
&& (common
->cmnd
[1] & 0x08)) { /* FUA */
788 spin_lock(&curlun
->filp
->f_lock
);
789 curlun
->filp
->f_flags
|= O_SYNC
;
790 spin_unlock(&curlun
->filp
->f_lock
);
793 if (lba
>= curlun
->num_sectors
) {
794 curlun
->sense_data
= SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE
;
798 /* Carry out the file writes */
800 file_offset
= usb_offset
= ((loff_t
) lba
) << curlun
->blkbits
;
801 amount_left_to_req
= common
->data_size_from_cmnd
;
802 amount_left_to_write
= common
->data_size_from_cmnd
;
804 while (amount_left_to_write
> 0) {
806 /* Queue a request for more data from the host */
807 bh
= common
->next_buffhd_to_fill
;
808 if (bh
->state
== BUF_STATE_EMPTY
&& get_some_more
) {
811 * Figure out how much we want to get:
812 * Try to get the remaining amount,
813 * but not more than the buffer size.
815 amount
= min(amount_left_to_req
, FSG_BUFLEN
);
817 /* Beyond the end of the backing file? */
818 if (usb_offset
>= curlun
->file_length
) {
821 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE
;
822 curlun
->sense_data_info
=
823 usb_offset
>> curlun
->blkbits
;
824 curlun
->info_valid
= 1;
828 /* Get the next buffer */
829 usb_offset
+= amount
;
830 common
->usb_amount_left
-= amount
;
831 amount_left_to_req
-= amount
;
832 if (amount_left_to_req
== 0)
836 * Except at the end of the transfer, amount will be
837 * equal to the buffer size, which is divisible by
838 * the bulk-out maxpacket size.
840 set_bulk_out_req_length(common
, bh
, amount
);
841 if (!start_out_transfer(common
, bh
))
842 /* Dunno what to do if common->fsg is NULL */
844 common
->next_buffhd_to_fill
= bh
->next
;
848 /* Write the received data to the backing file */
849 bh
= common
->next_buffhd_to_drain
;
850 if (bh
->state
== BUF_STATE_EMPTY
&& !get_some_more
)
851 break; /* We stopped early */
853 /* Wait for the data to be received */
854 rc
= sleep_thread(common
, false, bh
);
858 common
->next_buffhd_to_drain
= bh
->next
;
859 bh
->state
= BUF_STATE_EMPTY
;
861 /* Did something go wrong with the transfer? */
862 if (bh
->outreq
->status
!= 0) {
863 curlun
->sense_data
= SS_COMMUNICATION_FAILURE
;
864 curlun
->sense_data_info
=
865 file_offset
>> curlun
->blkbits
;
866 curlun
->info_valid
= 1;
870 amount
= bh
->outreq
->actual
;
871 if (curlun
->file_length
- file_offset
< amount
) {
872 LERROR(curlun
, "write %u @ %llu beyond end %llu\n",
873 amount
, (unsigned long long)file_offset
,
874 (unsigned long long)curlun
->file_length
);
875 amount
= curlun
->file_length
- file_offset
;
879 * Don't accept excess data. The spec doesn't say
880 * what to do in this case. We'll ignore the error.
882 amount
= min(amount
, bh
->bulk_out_intended_length
);
884 /* Don't write a partial block */
885 amount
= round_down(amount
, curlun
->blksize
);
889 /* Perform the write */
890 file_offset_tmp
= file_offset
;
891 nwritten
= kernel_write(curlun
->filp
, bh
->buf
, amount
,
893 VLDBG(curlun
, "file write %u @ %llu -> %d\n", amount
,
894 (unsigned long long)file_offset
, (int)nwritten
);
895 if (signal_pending(current
))
896 return -EINTR
; /* Interrupted! */
899 LDBG(curlun
, "error in file write: %d\n",
902 } else if (nwritten
< amount
) {
903 LDBG(curlun
, "partial file write: %d/%u\n",
904 (int) nwritten
, amount
);
905 nwritten
= round_down(nwritten
, curlun
->blksize
);
907 file_offset
+= nwritten
;
908 amount_left_to_write
-= nwritten
;
909 common
->residue
-= nwritten
;
911 /* If an error occurred, report it and its position */
912 if (nwritten
< amount
) {
913 curlun
->sense_data
= SS_WRITE_ERROR
;
914 curlun
->sense_data_info
=
915 file_offset
>> curlun
->blkbits
;
916 curlun
->info_valid
= 1;
921 /* Did the host decide to stop early? */
922 if (bh
->outreq
->actual
< bh
->bulk_out_intended_length
) {
923 common
->short_packet_received
= 1;
928 return -EIO
; /* No default reply */
932 /*-------------------------------------------------------------------------*/
934 static int do_synchronize_cache(struct fsg_common
*common
)
936 struct fsg_lun
*curlun
= common
->curlun
;
939 /* We ignore the requested LBA and write out all file's
940 * dirty data buffers. */
941 rc
= fsg_lun_fsync_sub(curlun
);
943 curlun
->sense_data
= SS_WRITE_ERROR
;
948 /*-------------------------------------------------------------------------*/
950 static void invalidate_sub(struct fsg_lun
*curlun
)
952 struct file
*filp
= curlun
->filp
;
953 struct inode
*inode
= file_inode(filp
);
956 rc
= invalidate_mapping_pages(inode
->i_mapping
, 0, -1);
957 VLDBG(curlun
, "invalidate_mapping_pages -> %ld\n", rc
);
960 static int do_verify(struct fsg_common
*common
)
962 struct fsg_lun
*curlun
= common
->curlun
;
964 u32 verification_length
;
965 struct fsg_buffhd
*bh
= common
->next_buffhd_to_fill
;
966 loff_t file_offset
, file_offset_tmp
;
972 * Get the starting Logical Block Address and check that it's
975 lba
= get_unaligned_be32(&common
->cmnd
[2]);
976 if (lba
>= curlun
->num_sectors
) {
977 curlun
->sense_data
= SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE
;
982 * We allow DPO (Disable Page Out = don't save data in the
983 * cache) but we don't implement it.
985 if (common
->cmnd
[1] & ~0x10) {
986 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
990 verification_length
= get_unaligned_be16(&common
->cmnd
[7]);
991 if (unlikely(verification_length
== 0))
992 return -EIO
; /* No default reply */
994 /* Prepare to carry out the file verify */
995 amount_left
= verification_length
<< curlun
->blkbits
;
996 file_offset
= ((loff_t
) lba
) << curlun
->blkbits
;
998 /* Write out all the dirty buffers before invalidating them */
999 fsg_lun_fsync_sub(curlun
);
1000 if (signal_pending(current
))
1003 invalidate_sub(curlun
);
1004 if (signal_pending(current
))
1007 /* Just try to read the requested blocks */
1008 while (amount_left
> 0) {
1010 * Figure out how much we need to read:
1011 * Try to read the remaining amount, but not more than
1013 * And don't try to read past the end of the file.
1015 amount
= min(amount_left
, FSG_BUFLEN
);
1016 amount
= min((loff_t
)amount
,
1017 curlun
->file_length
- file_offset
);
1019 curlun
->sense_data
=
1020 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE
;
1021 curlun
->sense_data_info
=
1022 file_offset
>> curlun
->blkbits
;
1023 curlun
->info_valid
= 1;
1027 /* Perform the read */
1028 file_offset_tmp
= file_offset
;
1029 nread
= kernel_read(curlun
->filp
, bh
->buf
, amount
,
1031 VLDBG(curlun
, "file read %u @ %llu -> %d\n", amount
,
1032 (unsigned long long) file_offset
,
1034 if (signal_pending(current
))
1038 LDBG(curlun
, "error in file verify: %d\n", (int)nread
);
1040 } else if (nread
< amount
) {
1041 LDBG(curlun
, "partial file verify: %d/%u\n",
1042 (int)nread
, amount
);
1043 nread
= round_down(nread
, curlun
->blksize
);
1046 curlun
->sense_data
= SS_UNRECOVERED_READ_ERROR
;
1047 curlun
->sense_data_info
=
1048 file_offset
>> curlun
->blkbits
;
1049 curlun
->info_valid
= 1;
1052 file_offset
+= nread
;
1053 amount_left
-= nread
;
1059 /*-------------------------------------------------------------------------*/
1061 static int do_inquiry(struct fsg_common
*common
, struct fsg_buffhd
*bh
)
1063 struct fsg_lun
*curlun
= common
->curlun
;
1064 u8
*buf
= (u8
*) bh
->buf
;
1066 if (!curlun
) { /* Unsupported LUNs are okay */
1067 common
->bad_lun_okay
= 1;
1069 buf
[0] = TYPE_NO_LUN
; /* Unsupported, no device-type */
1070 buf
[4] = 31; /* Additional length */
1074 buf
[0] = curlun
->cdrom
? TYPE_ROM
: TYPE_DISK
;
1075 buf
[1] = curlun
->removable
? 0x80 : 0;
1076 buf
[2] = 2; /* ANSI SCSI level 2 */
1077 buf
[3] = 2; /* SCSI-2 INQUIRY data format */
1078 buf
[4] = 31; /* Additional length */
1079 buf
[5] = 0; /* No special options */
1082 if (curlun
->inquiry_string
[0])
1083 memcpy(buf
+ 8, curlun
->inquiry_string
,
1084 sizeof(curlun
->inquiry_string
));
1086 memcpy(buf
+ 8, common
->inquiry_string
,
1087 sizeof(common
->inquiry_string
));
1091 static int do_request_sense(struct fsg_common
*common
, struct fsg_buffhd
*bh
)
1093 struct fsg_lun
*curlun
= common
->curlun
;
1094 u8
*buf
= (u8
*) bh
->buf
;
1099 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
1101 * If a REQUEST SENSE command is received from an initiator
1102 * with a pending unit attention condition (before the target
1103 * generates the contingent allegiance condition), then the
1104 * target shall either:
1105 * a) report any pending sense data and preserve the unit
1106 * attention condition on the logical unit, or,
1107 * b) report the unit attention condition, may discard any
1108 * pending sense data, and clear the unit attention
1109 * condition on the logical unit for that initiator.
1111 * FSG normally uses option a); enable this code to use option b).
1114 if (curlun
&& curlun
->unit_attention_data
!= SS_NO_SENSE
) {
1115 curlun
->sense_data
= curlun
->unit_attention_data
;
1116 curlun
->unit_attention_data
= SS_NO_SENSE
;
1120 if (!curlun
) { /* Unsupported LUNs are okay */
1121 common
->bad_lun_okay
= 1;
1122 sd
= SS_LOGICAL_UNIT_NOT_SUPPORTED
;
1126 sd
= curlun
->sense_data
;
1127 sdinfo
= curlun
->sense_data_info
;
1128 valid
= curlun
->info_valid
<< 7;
1129 curlun
->sense_data
= SS_NO_SENSE
;
1130 curlun
->sense_data_info
= 0;
1131 curlun
->info_valid
= 0;
1135 buf
[0] = valid
| 0x70; /* Valid, current error */
1137 put_unaligned_be32(sdinfo
, &buf
[3]); /* Sense information */
1138 buf
[7] = 18 - 8; /* Additional sense length */
1144 static int do_read_capacity(struct fsg_common
*common
, struct fsg_buffhd
*bh
)
1146 struct fsg_lun
*curlun
= common
->curlun
;
1147 u32 lba
= get_unaligned_be32(&common
->cmnd
[2]);
1148 int pmi
= common
->cmnd
[8];
1149 u8
*buf
= (u8
*)bh
->buf
;
1151 /* Check the PMI and LBA fields */
1152 if (pmi
> 1 || (pmi
== 0 && lba
!= 0)) {
1153 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
1157 put_unaligned_be32(curlun
->num_sectors
- 1, &buf
[0]);
1158 /* Max logical block */
1159 put_unaligned_be32(curlun
->blksize
, &buf
[4]);/* Block length */
1163 static int do_read_header(struct fsg_common
*common
, struct fsg_buffhd
*bh
)
1165 struct fsg_lun
*curlun
= common
->curlun
;
1166 int msf
= common
->cmnd
[1] & 0x02;
1167 u32 lba
= get_unaligned_be32(&common
->cmnd
[2]);
1168 u8
*buf
= (u8
*)bh
->buf
;
1170 if (common
->cmnd
[1] & ~0x02) { /* Mask away MSF */
1171 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
1174 if (lba
>= curlun
->num_sectors
) {
1175 curlun
->sense_data
= SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE
;
1180 buf
[0] = 0x01; /* 2048 bytes of user data, rest is EC */
1181 store_cdrom_address(&buf
[4], msf
, lba
);
1185 static int do_read_toc(struct fsg_common
*common
, struct fsg_buffhd
*bh
)
1187 struct fsg_lun
*curlun
= common
->curlun
;
1188 int msf
= common
->cmnd
[1] & 0x02;
1189 int start_track
= common
->cmnd
[6];
1190 u8
*buf
= (u8
*)bh
->buf
;
1192 if ((common
->cmnd
[1] & ~0x02) != 0 || /* Mask away MSF */
1194 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
1199 buf
[1] = (20-2); /* TOC data length */
1200 buf
[2] = 1; /* First track number */
1201 buf
[3] = 1; /* Last track number */
1202 buf
[5] = 0x16; /* Data track, copying allowed */
1203 buf
[6] = 0x01; /* Only track is number 1 */
1204 store_cdrom_address(&buf
[8], msf
, 0);
1206 buf
[13] = 0x16; /* Lead-out track is data */
1207 buf
[14] = 0xAA; /* Lead-out track number */
1208 store_cdrom_address(&buf
[16], msf
, curlun
->num_sectors
);
1212 static int do_mode_sense(struct fsg_common
*common
, struct fsg_buffhd
*bh
)
1214 struct fsg_lun
*curlun
= common
->curlun
;
1215 int mscmnd
= common
->cmnd
[0];
1216 u8
*buf
= (u8
*) bh
->buf
;
1219 int changeable_values
, all_pages
;
1223 if ((common
->cmnd
[1] & ~0x08) != 0) { /* Mask away DBD */
1224 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
1227 pc
= common
->cmnd
[2] >> 6;
1228 page_code
= common
->cmnd
[2] & 0x3f;
1230 curlun
->sense_data
= SS_SAVING_PARAMETERS_NOT_SUPPORTED
;
1233 changeable_values
= (pc
== 1);
1234 all_pages
= (page_code
== 0x3f);
1237 * Write the mode parameter header. Fixed values are: default
1238 * medium type, no cache control (DPOFUA), and no block descriptors.
1239 * The only variable value is the WriteProtect bit. We will fill in
1240 * the mode data length later.
1243 if (mscmnd
== MODE_SENSE
) {
1244 buf
[2] = (curlun
->ro
? 0x80 : 0x00); /* WP, DPOFUA */
1247 } else { /* MODE_SENSE_10 */
1248 buf
[3] = (curlun
->ro
? 0x80 : 0x00); /* WP, DPOFUA */
1250 limit
= 65535; /* Should really be FSG_BUFLEN */
1253 /* No block descriptors */
1256 * The mode pages, in numerical order. The only page we support
1257 * is the Caching page.
1259 if (page_code
== 0x08 || all_pages
) {
1261 buf
[0] = 0x08; /* Page code */
1262 buf
[1] = 10; /* Page length */
1263 memset(buf
+2, 0, 10); /* None of the fields are changeable */
1265 if (!changeable_values
) {
1266 buf
[2] = 0x04; /* Write cache enable, */
1267 /* Read cache not disabled */
1268 /* No cache retention priorities */
1269 put_unaligned_be16(0xffff, &buf
[4]);
1270 /* Don't disable prefetch */
1271 /* Minimum prefetch = 0 */
1272 put_unaligned_be16(0xffff, &buf
[8]);
1273 /* Maximum prefetch */
1274 put_unaligned_be16(0xffff, &buf
[10]);
1275 /* Maximum prefetch ceiling */
1281 * Check that a valid page was requested and the mode data length
1285 if (!valid_page
|| len
> limit
) {
1286 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
1290 /* Store the mode data length */
1291 if (mscmnd
== MODE_SENSE
)
1294 put_unaligned_be16(len
- 2, buf0
);
1298 static int do_start_stop(struct fsg_common
*common
)
1300 struct fsg_lun
*curlun
= common
->curlun
;
1305 } else if (!curlun
->removable
) {
1306 curlun
->sense_data
= SS_INVALID_COMMAND
;
1308 } else if ((common
->cmnd
[1] & ~0x01) != 0 || /* Mask away Immed */
1309 (common
->cmnd
[4] & ~0x03) != 0) { /* Mask LoEj, Start */
1310 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
1314 loej
= common
->cmnd
[4] & 0x02;
1315 start
= common
->cmnd
[4] & 0x01;
1318 * Our emulation doesn't support mounting; the medium is
1319 * available for use as soon as it is loaded.
1322 if (!fsg_lun_is_open(curlun
)) {
1323 curlun
->sense_data
= SS_MEDIUM_NOT_PRESENT
;
1329 /* Are we allowed to unload the media? */
1330 if (curlun
->prevent_medium_removal
) {
1331 LDBG(curlun
, "unload attempt prevented\n");
1332 curlun
->sense_data
= SS_MEDIUM_REMOVAL_PREVENTED
;
1339 up_read(&common
->filesem
);
1340 down_write(&common
->filesem
);
1341 fsg_lun_close(curlun
);
1342 up_write(&common
->filesem
);
1343 down_read(&common
->filesem
);
1348 static int do_prevent_allow(struct fsg_common
*common
)
1350 struct fsg_lun
*curlun
= common
->curlun
;
1353 if (!common
->curlun
) {
1355 } else if (!common
->curlun
->removable
) {
1356 common
->curlun
->sense_data
= SS_INVALID_COMMAND
;
1360 prevent
= common
->cmnd
[4] & 0x01;
1361 if ((common
->cmnd
[4] & ~0x01) != 0) { /* Mask away Prevent */
1362 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
1366 if (curlun
->prevent_medium_removal
&& !prevent
)
1367 fsg_lun_fsync_sub(curlun
);
1368 curlun
->prevent_medium_removal
= prevent
;
1372 static int do_read_format_capacities(struct fsg_common
*common
,
1373 struct fsg_buffhd
*bh
)
1375 struct fsg_lun
*curlun
= common
->curlun
;
1376 u8
*buf
= (u8
*) bh
->buf
;
1378 buf
[0] = buf
[1] = buf
[2] = 0;
1379 buf
[3] = 8; /* Only the Current/Maximum Capacity Descriptor */
1382 put_unaligned_be32(curlun
->num_sectors
, &buf
[0]);
1383 /* Number of blocks */
1384 put_unaligned_be32(curlun
->blksize
, &buf
[4]);/* Block length */
1385 buf
[4] = 0x02; /* Current capacity */
1389 static int do_mode_select(struct fsg_common
*common
, struct fsg_buffhd
*bh
)
1391 struct fsg_lun
*curlun
= common
->curlun
;
1393 /* We don't support MODE SELECT */
1395 curlun
->sense_data
= SS_INVALID_COMMAND
;
1400 /*-------------------------------------------------------------------------*/
1402 static int halt_bulk_in_endpoint(struct fsg_dev
*fsg
)
1406 rc
= fsg_set_halt(fsg
, fsg
->bulk_in
);
1408 VDBG(fsg
, "delayed bulk-in endpoint halt\n");
1410 if (rc
!= -EAGAIN
) {
1411 WARNING(fsg
, "usb_ep_set_halt -> %d\n", rc
);
1416 /* Wait for a short time and then try again */
1417 if (msleep_interruptible(100) != 0)
1419 rc
= usb_ep_set_halt(fsg
->bulk_in
);
1424 static int wedge_bulk_in_endpoint(struct fsg_dev
*fsg
)
1428 DBG(fsg
, "bulk-in set wedge\n");
1429 rc
= usb_ep_set_wedge(fsg
->bulk_in
);
1431 VDBG(fsg
, "delayed bulk-in endpoint wedge\n");
1433 if (rc
!= -EAGAIN
) {
1434 WARNING(fsg
, "usb_ep_set_wedge -> %d\n", rc
);
1439 /* Wait for a short time and then try again */
1440 if (msleep_interruptible(100) != 0)
1442 rc
= usb_ep_set_wedge(fsg
->bulk_in
);
1447 static int throw_away_data(struct fsg_common
*common
)
1449 struct fsg_buffhd
*bh
, *bh2
;
1453 for (bh
= common
->next_buffhd_to_drain
;
1454 bh
->state
!= BUF_STATE_EMPTY
|| common
->usb_amount_left
> 0;
1455 bh
= common
->next_buffhd_to_drain
) {
1457 /* Try to submit another request if we need one */
1458 bh2
= common
->next_buffhd_to_fill
;
1459 if (bh2
->state
== BUF_STATE_EMPTY
&&
1460 common
->usb_amount_left
> 0) {
1461 amount
= min(common
->usb_amount_left
, FSG_BUFLEN
);
1464 * Except at the end of the transfer, amount will be
1465 * equal to the buffer size, which is divisible by
1466 * the bulk-out maxpacket size.
1468 set_bulk_out_req_length(common
, bh2
, amount
);
1469 if (!start_out_transfer(common
, bh2
))
1470 /* Dunno what to do if common->fsg is NULL */
1472 common
->next_buffhd_to_fill
= bh2
->next
;
1473 common
->usb_amount_left
-= amount
;
1477 /* Wait for the data to be received */
1478 rc
= sleep_thread(common
, false, bh
);
1482 /* Throw away the data in a filled buffer */
1483 bh
->state
= BUF_STATE_EMPTY
;
1484 common
->next_buffhd_to_drain
= bh
->next
;
1486 /* A short packet or an error ends everything */
1487 if (bh
->outreq
->actual
< bh
->bulk_out_intended_length
||
1488 bh
->outreq
->status
!= 0) {
1489 raise_exception(common
, FSG_STATE_ABORT_BULK_OUT
);
1496 static int finish_reply(struct fsg_common
*common
)
1498 struct fsg_buffhd
*bh
= common
->next_buffhd_to_fill
;
1501 switch (common
->data_dir
) {
1503 break; /* Nothing to send */
1506 * If we don't know whether the host wants to read or write,
1507 * this must be CB or CBI with an unknown command. We mustn't
1508 * try to send or receive any data. So stall both bulk pipes
1509 * if we can and wait for a reset.
1511 case DATA_DIR_UNKNOWN
:
1512 if (!common
->can_stall
) {
1514 } else if (fsg_is_set(common
)) {
1515 fsg_set_halt(common
->fsg
, common
->fsg
->bulk_out
);
1516 rc
= halt_bulk_in_endpoint(common
->fsg
);
1518 /* Don't know what to do if common->fsg is NULL */
1523 /* All but the last buffer of data must have already been sent */
1524 case DATA_DIR_TO_HOST
:
1525 if (common
->data_size
== 0) {
1526 /* Nothing to send */
1528 /* Don't know what to do if common->fsg is NULL */
1529 } else if (!fsg_is_set(common
)) {
1532 /* If there's no residue, simply send the last buffer */
1533 } else if (common
->residue
== 0) {
1534 bh
->inreq
->zero
= 0;
1535 if (!start_in_transfer(common
, bh
))
1537 common
->next_buffhd_to_fill
= bh
->next
;
1540 * For Bulk-only, mark the end of the data with a short
1541 * packet. If we are allowed to stall, halt the bulk-in
1542 * endpoint. (Note: This violates the Bulk-Only Transport
1543 * specification, which requires us to pad the data if we
1544 * don't halt the endpoint. Presumably nobody will mind.)
1547 bh
->inreq
->zero
= 1;
1548 if (!start_in_transfer(common
, bh
))
1550 common
->next_buffhd_to_fill
= bh
->next
;
1551 if (common
->can_stall
)
1552 rc
= halt_bulk_in_endpoint(common
->fsg
);
1557 * We have processed all we want from the data the host has sent.
1558 * There may still be outstanding bulk-out requests.
1560 case DATA_DIR_FROM_HOST
:
1561 if (common
->residue
== 0) {
1562 /* Nothing to receive */
1564 /* Did the host stop sending unexpectedly early? */
1565 } else if (common
->short_packet_received
) {
1566 raise_exception(common
, FSG_STATE_ABORT_BULK_OUT
);
1570 * We haven't processed all the incoming data. Even though
1571 * we may be allowed to stall, doing so would cause a race.
1572 * The controller may already have ACK'ed all the remaining
1573 * bulk-out packets, in which case the host wouldn't see a
1574 * STALL. Not realizing the endpoint was halted, it wouldn't
1575 * clear the halt -- leading to problems later on.
1578 } else if (common
->can_stall
) {
1579 if (fsg_is_set(common
))
1580 fsg_set_halt(common
->fsg
,
1581 common
->fsg
->bulk_out
);
1582 raise_exception(common
, FSG_STATE_ABORT_BULK_OUT
);
1587 * We can't stall. Read in the excess data and throw it
1591 rc
= throw_away_data(common
);
1598 static void send_status(struct fsg_common
*common
)
1600 struct fsg_lun
*curlun
= common
->curlun
;
1601 struct fsg_buffhd
*bh
;
1602 struct bulk_cs_wrap
*csw
;
1604 u8 status
= US_BULK_STAT_OK
;
1607 /* Wait for the next buffer to become available */
1608 bh
= common
->next_buffhd_to_fill
;
1609 rc
= sleep_thread(common
, false, bh
);
1614 sd
= curlun
->sense_data
;
1615 sdinfo
= curlun
->sense_data_info
;
1616 } else if (common
->bad_lun_okay
)
1619 sd
= SS_LOGICAL_UNIT_NOT_SUPPORTED
;
1621 if (common
->phase_error
) {
1622 DBG(common
, "sending phase-error status\n");
1623 status
= US_BULK_STAT_PHASE
;
1624 sd
= SS_INVALID_COMMAND
;
1625 } else if (sd
!= SS_NO_SENSE
) {
1626 DBG(common
, "sending command-failure status\n");
1627 status
= US_BULK_STAT_FAIL
;
1628 VDBG(common
, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
1630 SK(sd
), ASC(sd
), ASCQ(sd
), sdinfo
);
1633 /* Store and send the Bulk-only CSW */
1634 csw
= (void *)bh
->buf
;
1636 csw
->Signature
= cpu_to_le32(US_BULK_CS_SIGN
);
1637 csw
->Tag
= common
->tag
;
1638 csw
->Residue
= cpu_to_le32(common
->residue
);
1639 csw
->Status
= status
;
1641 bh
->inreq
->length
= US_BULK_CS_WRAP_LEN
;
1642 bh
->inreq
->zero
= 0;
1643 if (!start_in_transfer(common
, bh
))
1644 /* Don't know what to do if common->fsg is NULL */
1647 common
->next_buffhd_to_fill
= bh
->next
;
1652 /*-------------------------------------------------------------------------*/
1655 * Check whether the command is properly formed and whether its data size
1656 * and direction agree with the values we already have.
1658 static int check_command(struct fsg_common
*common
, int cmnd_size
,
1659 enum data_direction data_dir
, unsigned int mask
,
1660 int needs_medium
, const char *name
)
1663 unsigned int lun
= common
->cmnd
[1] >> 5;
1664 static const char dirletter
[4] = {'u', 'o', 'i', 'n'};
1666 struct fsg_lun
*curlun
;
1669 if (common
->data_dir
!= DATA_DIR_UNKNOWN
)
1670 sprintf(hdlen
, ", H%c=%u", dirletter
[(int) common
->data_dir
],
1672 VDBG(common
, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
1673 name
, cmnd_size
, dirletter
[(int) data_dir
],
1674 common
->data_size_from_cmnd
, common
->cmnd_size
, hdlen
);
1677 * We can't reply at all until we know the correct data direction
1680 if (common
->data_size_from_cmnd
== 0)
1681 data_dir
= DATA_DIR_NONE
;
1682 if (common
->data_size
< common
->data_size_from_cmnd
) {
1684 * Host data size < Device data size is a phase error.
1685 * Carry out the command, but only transfer as much as
1688 common
->data_size_from_cmnd
= common
->data_size
;
1689 common
->phase_error
= 1;
1691 common
->residue
= common
->data_size
;
1692 common
->usb_amount_left
= common
->data_size
;
1694 /* Conflicting data directions is a phase error */
1695 if (common
->data_dir
!= data_dir
&& common
->data_size_from_cmnd
> 0) {
1696 common
->phase_error
= 1;
1700 /* Verify the length of the command itself */
1701 if (cmnd_size
!= common
->cmnd_size
) {
1704 * Special case workaround: There are plenty of buggy SCSI
1705 * implementations. Many have issues with cbw->Length
1706 * field passing a wrong command size. For those cases we
1707 * always try to work around the problem by using the length
1708 * sent by the host side provided it is at least as large
1709 * as the correct command length.
1710 * Examples of such cases would be MS-Windows, which issues
1711 * REQUEST SENSE with cbw->Length == 12 where it should
1712 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
1713 * REQUEST SENSE with cbw->Length == 10 where it should
1716 if (cmnd_size
<= common
->cmnd_size
) {
1717 DBG(common
, "%s is buggy! Expected length %d "
1718 "but we got %d\n", name
,
1719 cmnd_size
, common
->cmnd_size
);
1720 cmnd_size
= common
->cmnd_size
;
1722 common
->phase_error
= 1;
1727 /* Check that the LUN values are consistent */
1728 if (common
->lun
!= lun
)
1729 DBG(common
, "using LUN %u from CBW, not LUN %u from CDB\n",
1733 curlun
= common
->curlun
;
1735 if (common
->cmnd
[0] != REQUEST_SENSE
) {
1736 curlun
->sense_data
= SS_NO_SENSE
;
1737 curlun
->sense_data_info
= 0;
1738 curlun
->info_valid
= 0;
1741 common
->bad_lun_okay
= 0;
1744 * INQUIRY and REQUEST SENSE commands are explicitly allowed
1745 * to use unsupported LUNs; all others may not.
1747 if (common
->cmnd
[0] != INQUIRY
&&
1748 common
->cmnd
[0] != REQUEST_SENSE
) {
1749 DBG(common
, "unsupported LUN %u\n", common
->lun
);
1755 * If a unit attention condition exists, only INQUIRY and
1756 * REQUEST SENSE commands are allowed; anything else must fail.
1758 if (curlun
&& curlun
->unit_attention_data
!= SS_NO_SENSE
&&
1759 common
->cmnd
[0] != INQUIRY
&&
1760 common
->cmnd
[0] != REQUEST_SENSE
) {
1761 curlun
->sense_data
= curlun
->unit_attention_data
;
1762 curlun
->unit_attention_data
= SS_NO_SENSE
;
1766 /* Check that only command bytes listed in the mask are non-zero */
1767 common
->cmnd
[1] &= 0x1f; /* Mask away the LUN */
1768 for (i
= 1; i
< cmnd_size
; ++i
) {
1769 if (common
->cmnd
[i
] && !(mask
& (1 << i
))) {
1771 curlun
->sense_data
= SS_INVALID_FIELD_IN_CDB
;
1776 /* If the medium isn't mounted and the command needs to access
1777 * it, return an error. */
1778 if (curlun
&& !fsg_lun_is_open(curlun
) && needs_medium
) {
1779 curlun
->sense_data
= SS_MEDIUM_NOT_PRESENT
;
1786 /* wrapper of check_command for data size in blocks handling */
1787 static int check_command_size_in_blocks(struct fsg_common
*common
,
1788 int cmnd_size
, enum data_direction data_dir
,
1789 unsigned int mask
, int needs_medium
, const char *name
)
1792 common
->data_size_from_cmnd
<<= common
->curlun
->blkbits
;
1793 return check_command(common
, cmnd_size
, data_dir
,
1794 mask
, needs_medium
, name
);
1797 static int do_scsi_command(struct fsg_common
*common
)
1799 struct fsg_buffhd
*bh
;
1801 int reply
= -EINVAL
;
1803 static char unknown
[16];
1807 /* Wait for the next buffer to become available for data or status */
1808 bh
= common
->next_buffhd_to_fill
;
1809 common
->next_buffhd_to_drain
= bh
;
1810 rc
= sleep_thread(common
, false, bh
);
1814 common
->phase_error
= 0;
1815 common
->short_packet_received
= 0;
1817 down_read(&common
->filesem
); /* We're using the backing file */
1818 switch (common
->cmnd
[0]) {
1821 common
->data_size_from_cmnd
= common
->cmnd
[4];
1822 reply
= check_command(common
, 6, DATA_DIR_TO_HOST
,
1826 reply
= do_inquiry(common
, bh
);
1830 common
->data_size_from_cmnd
= common
->cmnd
[4];
1831 reply
= check_command(common
, 6, DATA_DIR_FROM_HOST
,
1835 reply
= do_mode_select(common
, bh
);
1838 case MODE_SELECT_10
:
1839 common
->data_size_from_cmnd
=
1840 get_unaligned_be16(&common
->cmnd
[7]);
1841 reply
= check_command(common
, 10, DATA_DIR_FROM_HOST
,
1845 reply
= do_mode_select(common
, bh
);
1849 common
->data_size_from_cmnd
= common
->cmnd
[4];
1850 reply
= check_command(common
, 6, DATA_DIR_TO_HOST
,
1851 (1<<1) | (1<<2) | (1<<4), 0,
1854 reply
= do_mode_sense(common
, bh
);
1858 common
->data_size_from_cmnd
=
1859 get_unaligned_be16(&common
->cmnd
[7]);
1860 reply
= check_command(common
, 10, DATA_DIR_TO_HOST
,
1861 (1<<1) | (1<<2) | (3<<7), 0,
1864 reply
= do_mode_sense(common
, bh
);
1867 case ALLOW_MEDIUM_REMOVAL
:
1868 common
->data_size_from_cmnd
= 0;
1869 reply
= check_command(common
, 6, DATA_DIR_NONE
,
1871 "PREVENT-ALLOW MEDIUM REMOVAL");
1873 reply
= do_prevent_allow(common
);
1877 i
= common
->cmnd
[4];
1878 common
->data_size_from_cmnd
= (i
== 0) ? 256 : i
;
1879 reply
= check_command_size_in_blocks(common
, 6,
1884 reply
= do_read(common
);
1888 common
->data_size_from_cmnd
=
1889 get_unaligned_be16(&common
->cmnd
[7]);
1890 reply
= check_command_size_in_blocks(common
, 10,
1892 (1<<1) | (0xf<<2) | (3<<7), 1,
1895 reply
= do_read(common
);
1899 common
->data_size_from_cmnd
=
1900 get_unaligned_be32(&common
->cmnd
[6]);
1901 reply
= check_command_size_in_blocks(common
, 12,
1903 (1<<1) | (0xf<<2) | (0xf<<6), 1,
1906 reply
= do_read(common
);
1910 common
->data_size_from_cmnd
= 8;
1911 reply
= check_command(common
, 10, DATA_DIR_TO_HOST
,
1912 (0xf<<2) | (1<<8), 1,
1915 reply
= do_read_capacity(common
, bh
);
1919 if (!common
->curlun
|| !common
->curlun
->cdrom
)
1921 common
->data_size_from_cmnd
=
1922 get_unaligned_be16(&common
->cmnd
[7]);
1923 reply
= check_command(common
, 10, DATA_DIR_TO_HOST
,
1924 (3<<7) | (0x1f<<1), 1,
1927 reply
= do_read_header(common
, bh
);
1931 if (!common
->curlun
|| !common
->curlun
->cdrom
)
1933 common
->data_size_from_cmnd
=
1934 get_unaligned_be16(&common
->cmnd
[7]);
1935 reply
= check_command(common
, 10, DATA_DIR_TO_HOST
,
1939 reply
= do_read_toc(common
, bh
);
1942 case READ_FORMAT_CAPACITIES
:
1943 common
->data_size_from_cmnd
=
1944 get_unaligned_be16(&common
->cmnd
[7]);
1945 reply
= check_command(common
, 10, DATA_DIR_TO_HOST
,
1947 "READ FORMAT CAPACITIES");
1949 reply
= do_read_format_capacities(common
, bh
);
1953 common
->data_size_from_cmnd
= common
->cmnd
[4];
1954 reply
= check_command(common
, 6, DATA_DIR_TO_HOST
,
1958 reply
= do_request_sense(common
, bh
);
1962 common
->data_size_from_cmnd
= 0;
1963 reply
= check_command(common
, 6, DATA_DIR_NONE
,
1967 reply
= do_start_stop(common
);
1970 case SYNCHRONIZE_CACHE
:
1971 common
->data_size_from_cmnd
= 0;
1972 reply
= check_command(common
, 10, DATA_DIR_NONE
,
1973 (0xf<<2) | (3<<7), 1,
1974 "SYNCHRONIZE CACHE");
1976 reply
= do_synchronize_cache(common
);
1979 case TEST_UNIT_READY
:
1980 common
->data_size_from_cmnd
= 0;
1981 reply
= check_command(common
, 6, DATA_DIR_NONE
,
1987 * Although optional, this command is used by MS-Windows. We
1988 * support a minimal version: BytChk must be 0.
1991 common
->data_size_from_cmnd
= 0;
1992 reply
= check_command(common
, 10, DATA_DIR_NONE
,
1993 (1<<1) | (0xf<<2) | (3<<7), 1,
1996 reply
= do_verify(common
);
2000 i
= common
->cmnd
[4];
2001 common
->data_size_from_cmnd
= (i
== 0) ? 256 : i
;
2002 reply
= check_command_size_in_blocks(common
, 6,
2007 reply
= do_write(common
);
2011 common
->data_size_from_cmnd
=
2012 get_unaligned_be16(&common
->cmnd
[7]);
2013 reply
= check_command_size_in_blocks(common
, 10,
2015 (1<<1) | (0xf<<2) | (3<<7), 1,
2018 reply
= do_write(common
);
2022 common
->data_size_from_cmnd
=
2023 get_unaligned_be32(&common
->cmnd
[6]);
2024 reply
= check_command_size_in_blocks(common
, 12,
2026 (1<<1) | (0xf<<2) | (0xf<<6), 1,
2029 reply
= do_write(common
);
2033 * Some mandatory commands that we recognize but don't implement.
2034 * They don't mean much in this setting. It's left as an exercise
2035 * for anyone interested to implement RESERVE and RELEASE in terms
2041 case SEND_DIAGNOSTIC
:
2045 common
->data_size_from_cmnd
= 0;
2046 sprintf(unknown
, "Unknown x%02x", common
->cmnd
[0]);
2047 reply
= check_command(common
, common
->cmnd_size
,
2048 DATA_DIR_UNKNOWN
, ~0, 0, unknown
);
2050 common
->curlun
->sense_data
= SS_INVALID_COMMAND
;
2055 up_read(&common
->filesem
);
2057 if (reply
== -EINTR
|| signal_pending(current
))
2060 /* Set up the single reply buffer for finish_reply() */
2061 if (reply
== -EINVAL
)
2062 reply
= 0; /* Error reply length */
2063 if (reply
>= 0 && common
->data_dir
== DATA_DIR_TO_HOST
) {
2064 reply
= min((u32
)reply
, common
->data_size_from_cmnd
);
2065 bh
->inreq
->length
= reply
;
2066 bh
->state
= BUF_STATE_FULL
;
2067 common
->residue
-= reply
;
2068 } /* Otherwise it's already set */
2074 /*-------------------------------------------------------------------------*/
2076 static int received_cbw(struct fsg_dev
*fsg
, struct fsg_buffhd
*bh
)
2078 struct usb_request
*req
= bh
->outreq
;
2079 struct bulk_cb_wrap
*cbw
= req
->buf
;
2080 struct fsg_common
*common
= fsg
->common
;
2082 /* Was this a real packet? Should it be ignored? */
2083 if (req
->status
|| test_bit(IGNORE_BULK_OUT
, &fsg
->atomic_bitflags
))
2086 /* Is the CBW valid? */
2087 if (req
->actual
!= US_BULK_CB_WRAP_LEN
||
2088 cbw
->Signature
!= cpu_to_le32(
2090 DBG(fsg
, "invalid CBW: len %u sig 0x%x\n",
2092 le32_to_cpu(cbw
->Signature
));
2095 * The Bulk-only spec says we MUST stall the IN endpoint
2096 * (6.6.1), so it's unavoidable. It also says we must
2097 * retain this state until the next reset, but there's
2098 * no way to tell the controller driver it should ignore
2099 * Clear-Feature(HALT) requests.
2101 * We aren't required to halt the OUT endpoint; instead
2102 * we can simply accept and discard any data received
2103 * until the next reset.
2105 wedge_bulk_in_endpoint(fsg
);
2106 set_bit(IGNORE_BULK_OUT
, &fsg
->atomic_bitflags
);
2110 /* Is the CBW meaningful? */
2111 if (cbw
->Lun
>= ARRAY_SIZE(common
->luns
) ||
2112 cbw
->Flags
& ~US_BULK_FLAG_IN
|| cbw
->Length
<= 0 ||
2113 cbw
->Length
> MAX_COMMAND_SIZE
) {
2114 DBG(fsg
, "non-meaningful CBW: lun = %u, flags = 0x%x, "
2116 cbw
->Lun
, cbw
->Flags
, cbw
->Length
);
2119 * We can do anything we want here, so let's stall the
2120 * bulk pipes if we are allowed to.
2122 if (common
->can_stall
) {
2123 fsg_set_halt(fsg
, fsg
->bulk_out
);
2124 halt_bulk_in_endpoint(fsg
);
2129 /* Save the command for later */
2130 common
->cmnd_size
= cbw
->Length
;
2131 memcpy(common
->cmnd
, cbw
->CDB
, common
->cmnd_size
);
2132 if (cbw
->Flags
& US_BULK_FLAG_IN
)
2133 common
->data_dir
= DATA_DIR_TO_HOST
;
2135 common
->data_dir
= DATA_DIR_FROM_HOST
;
2136 common
->data_size
= le32_to_cpu(cbw
->DataTransferLength
);
2137 if (common
->data_size
== 0)
2138 common
->data_dir
= DATA_DIR_NONE
;
2139 common
->lun
= cbw
->Lun
;
2140 if (common
->lun
< ARRAY_SIZE(common
->luns
))
2141 common
->curlun
= common
->luns
[common
->lun
];
2143 common
->curlun
= NULL
;
2144 common
->tag
= cbw
->Tag
;
2148 static int get_next_command(struct fsg_common
*common
)
2150 struct fsg_buffhd
*bh
;
2153 /* Wait for the next buffer to become available */
2154 bh
= common
->next_buffhd_to_fill
;
2155 rc
= sleep_thread(common
, true, bh
);
2159 /* Queue a request to read a Bulk-only CBW */
2160 set_bulk_out_req_length(common
, bh
, US_BULK_CB_WRAP_LEN
);
2161 if (!start_out_transfer(common
, bh
))
2162 /* Don't know what to do if common->fsg is NULL */
2166 * We will drain the buffer in software, which means we
2167 * can reuse it for the next filling. No need to advance
2168 * next_buffhd_to_fill.
2171 /* Wait for the CBW to arrive */
2172 rc
= sleep_thread(common
, true, bh
);
2176 rc
= fsg_is_set(common
) ? received_cbw(common
->fsg
, bh
) : -EIO
;
2177 bh
->state
= BUF_STATE_EMPTY
;
2183 /*-------------------------------------------------------------------------*/
2185 static int alloc_request(struct fsg_common
*common
, struct usb_ep
*ep
,
2186 struct usb_request
**preq
)
2188 *preq
= usb_ep_alloc_request(ep
, GFP_ATOMIC
);
2191 ERROR(common
, "can't allocate request for %s\n", ep
->name
);
2195 /* Reset interface setting and re-init endpoint state (toggle etc). */
2196 static int do_set_interface(struct fsg_common
*common
, struct fsg_dev
*new_fsg
)
2198 struct fsg_dev
*fsg
;
2201 if (common
->running
)
2202 DBG(common
, "reset interface\n");
2205 /* Deallocate the requests */
2209 for (i
= 0; i
< common
->fsg_num_buffers
; ++i
) {
2210 struct fsg_buffhd
*bh
= &common
->buffhds
[i
];
2213 usb_ep_free_request(fsg
->bulk_in
, bh
->inreq
);
2217 usb_ep_free_request(fsg
->bulk_out
, bh
->outreq
);
2222 /* Disable the endpoints */
2223 if (fsg
->bulk_in_enabled
) {
2224 usb_ep_disable(fsg
->bulk_in
);
2225 fsg
->bulk_in_enabled
= 0;
2227 if (fsg
->bulk_out_enabled
) {
2228 usb_ep_disable(fsg
->bulk_out
);
2229 fsg
->bulk_out_enabled
= 0;
2233 wake_up(&common
->fsg_wait
);
2236 common
->running
= 0;
2240 common
->fsg
= new_fsg
;
2243 /* Enable the endpoints */
2244 rc
= config_ep_by_speed(common
->gadget
, &(fsg
->function
), fsg
->bulk_in
);
2247 rc
= usb_ep_enable(fsg
->bulk_in
);
2250 fsg
->bulk_in
->driver_data
= common
;
2251 fsg
->bulk_in_enabled
= 1;
2253 rc
= config_ep_by_speed(common
->gadget
, &(fsg
->function
),
2257 rc
= usb_ep_enable(fsg
->bulk_out
);
2260 fsg
->bulk_out
->driver_data
= common
;
2261 fsg
->bulk_out_enabled
= 1;
2262 common
->bulk_out_maxpacket
= usb_endpoint_maxp(fsg
->bulk_out
->desc
);
2263 clear_bit(IGNORE_BULK_OUT
, &fsg
->atomic_bitflags
);
2265 /* Allocate the requests */
2266 for (i
= 0; i
< common
->fsg_num_buffers
; ++i
) {
2267 struct fsg_buffhd
*bh
= &common
->buffhds
[i
];
2269 rc
= alloc_request(common
, fsg
->bulk_in
, &bh
->inreq
);
2272 rc
= alloc_request(common
, fsg
->bulk_out
, &bh
->outreq
);
2275 bh
->inreq
->buf
= bh
->outreq
->buf
= bh
->buf
;
2276 bh
->inreq
->context
= bh
->outreq
->context
= bh
;
2277 bh
->inreq
->complete
= bulk_in_complete
;
2278 bh
->outreq
->complete
= bulk_out_complete
;
2281 common
->running
= 1;
2282 for (i
= 0; i
< ARRAY_SIZE(common
->luns
); ++i
)
2283 if (common
->luns
[i
])
2284 common
->luns
[i
]->unit_attention_data
=
2290 /****************************** ALT CONFIGS ******************************/
2292 static int fsg_set_alt(struct usb_function
*f
, unsigned intf
, unsigned alt
)
2294 struct fsg_dev
*fsg
= fsg_from_func(f
);
2296 __raise_exception(fsg
->common
, FSG_STATE_CONFIG_CHANGE
, fsg
);
2297 return USB_GADGET_DELAYED_STATUS
;
2300 static void fsg_disable(struct usb_function
*f
)
2302 struct fsg_dev
*fsg
= fsg_from_func(f
);
2304 __raise_exception(fsg
->common
, FSG_STATE_CONFIG_CHANGE
, NULL
);
2308 /*-------------------------------------------------------------------------*/
2310 static void handle_exception(struct fsg_common
*common
)
2313 struct fsg_buffhd
*bh
;
2314 enum fsg_state old_state
;
2315 struct fsg_lun
*curlun
;
2316 unsigned int exception_req_tag
;
2317 struct fsg_dev
*new_fsg
;
2320 * Clear the existing signals. Anything but SIGUSR1 is converted
2321 * into a high-priority EXIT exception.
2324 int sig
= kernel_dequeue_signal();
2327 if (sig
!= SIGUSR1
) {
2328 spin_lock_irq(&common
->lock
);
2329 if (common
->state
< FSG_STATE_EXIT
)
2330 DBG(common
, "Main thread exiting on signal\n");
2331 common
->state
= FSG_STATE_EXIT
;
2332 spin_unlock_irq(&common
->lock
);
2336 /* Cancel all the pending transfers */
2337 if (likely(common
->fsg
)) {
2338 for (i
= 0; i
< common
->fsg_num_buffers
; ++i
) {
2339 bh
= &common
->buffhds
[i
];
2340 if (bh
->state
== BUF_STATE_SENDING
)
2341 usb_ep_dequeue(common
->fsg
->bulk_in
, bh
->inreq
);
2342 if (bh
->state
== BUF_STATE_RECEIVING
)
2343 usb_ep_dequeue(common
->fsg
->bulk_out
,
2346 /* Wait for a transfer to become idle */
2347 if (sleep_thread(common
, false, bh
))
2351 /* Clear out the controller's fifos */
2352 if (common
->fsg
->bulk_in_enabled
)
2353 usb_ep_fifo_flush(common
->fsg
->bulk_in
);
2354 if (common
->fsg
->bulk_out_enabled
)
2355 usb_ep_fifo_flush(common
->fsg
->bulk_out
);
2359 * Reset the I/O buffer states and pointers, the SCSI
2360 * state, and the exception. Then invoke the handler.
2362 spin_lock_irq(&common
->lock
);
2364 for (i
= 0; i
< common
->fsg_num_buffers
; ++i
) {
2365 bh
= &common
->buffhds
[i
];
2366 bh
->state
= BUF_STATE_EMPTY
;
2368 common
->next_buffhd_to_fill
= &common
->buffhds
[0];
2369 common
->next_buffhd_to_drain
= &common
->buffhds
[0];
2370 exception_req_tag
= common
->exception_req_tag
;
2371 new_fsg
= common
->exception_arg
;
2372 old_state
= common
->state
;
2373 common
->state
= FSG_STATE_NORMAL
;
2375 if (old_state
!= FSG_STATE_ABORT_BULK_OUT
) {
2376 for (i
= 0; i
< ARRAY_SIZE(common
->luns
); ++i
) {
2377 curlun
= common
->luns
[i
];
2380 curlun
->prevent_medium_removal
= 0;
2381 curlun
->sense_data
= SS_NO_SENSE
;
2382 curlun
->unit_attention_data
= SS_NO_SENSE
;
2383 curlun
->sense_data_info
= 0;
2384 curlun
->info_valid
= 0;
2387 spin_unlock_irq(&common
->lock
);
2389 /* Carry out any extra actions required for the exception */
2390 switch (old_state
) {
2391 case FSG_STATE_NORMAL
:
2394 case FSG_STATE_ABORT_BULK_OUT
:
2395 send_status(common
);
2398 case FSG_STATE_PROTOCOL_RESET
:
2400 * In case we were forced against our will to halt a
2401 * bulk endpoint, clear the halt now. (The SuperH UDC
2404 if (!fsg_is_set(common
))
2406 if (test_and_clear_bit(IGNORE_BULK_OUT
,
2407 &common
->fsg
->atomic_bitflags
))
2408 usb_ep_clear_halt(common
->fsg
->bulk_in
);
2410 if (common
->ep0_req_tag
== exception_req_tag
)
2411 ep0_queue(common
); /* Complete the status stage */
2414 * Technically this should go here, but it would only be
2415 * a waste of time. Ditto for the INTERFACE_CHANGE and
2416 * CONFIG_CHANGE cases.
2418 /* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */
2419 /* if (common->luns[i]) */
2420 /* common->luns[i]->unit_attention_data = */
2421 /* SS_RESET_OCCURRED; */
2424 case FSG_STATE_CONFIG_CHANGE
:
2425 do_set_interface(common
, new_fsg
);
2427 usb_composite_setup_continue(common
->cdev
);
2430 case FSG_STATE_EXIT
:
2431 do_set_interface(common
, NULL
); /* Free resources */
2432 spin_lock_irq(&common
->lock
);
2433 common
->state
= FSG_STATE_TERMINATED
; /* Stop the thread */
2434 spin_unlock_irq(&common
->lock
);
2437 case FSG_STATE_TERMINATED
:
2443 /*-------------------------------------------------------------------------*/
2445 static int fsg_main_thread(void *common_
)
2447 struct fsg_common
*common
= common_
;
2451 * Allow the thread to be killed by a signal, but set the signal mask
2452 * to block everything but INT, TERM, KILL, and USR1.
2454 allow_signal(SIGINT
);
2455 allow_signal(SIGTERM
);
2456 allow_signal(SIGKILL
);
2457 allow_signal(SIGUSR1
);
2459 /* Allow the thread to be frozen */
2463 while (common
->state
!= FSG_STATE_TERMINATED
) {
2464 if (exception_in_progress(common
) || signal_pending(current
)) {
2465 handle_exception(common
);
2469 if (!common
->running
) {
2470 sleep_thread(common
, true, NULL
);
2474 if (get_next_command(common
) || exception_in_progress(common
))
2476 if (do_scsi_command(common
) || exception_in_progress(common
))
2478 if (finish_reply(common
) || exception_in_progress(common
))
2480 send_status(common
);
2483 spin_lock_irq(&common
->lock
);
2484 common
->thread_task
= NULL
;
2485 spin_unlock_irq(&common
->lock
);
2487 /* Eject media from all LUNs */
2489 down_write(&common
->filesem
);
2490 for (i
= 0; i
< ARRAY_SIZE(common
->luns
); i
++) {
2491 struct fsg_lun
*curlun
= common
->luns
[i
];
2493 if (curlun
&& fsg_lun_is_open(curlun
))
2494 fsg_lun_close(curlun
);
2496 up_write(&common
->filesem
);
2498 /* Let fsg_unbind() know the thread has exited */
2499 complete_and_exit(&common
->thread_notifier
, 0);
2503 /*************************** DEVICE ATTRIBUTES ***************************/
2505 static ssize_t
ro_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
2507 struct fsg_lun
*curlun
= fsg_lun_from_dev(dev
);
2509 return fsg_show_ro(curlun
, buf
);
2512 static ssize_t
nofua_show(struct device
*dev
, struct device_attribute
*attr
,
2515 struct fsg_lun
*curlun
= fsg_lun_from_dev(dev
);
2517 return fsg_show_nofua(curlun
, buf
);
2520 static ssize_t
file_show(struct device
*dev
, struct device_attribute
*attr
,
2523 struct fsg_lun
*curlun
= fsg_lun_from_dev(dev
);
2524 struct rw_semaphore
*filesem
= dev_get_drvdata(dev
);
2526 return fsg_show_file(curlun
, filesem
, buf
);
2529 static ssize_t
ro_store(struct device
*dev
, struct device_attribute
*attr
,
2530 const char *buf
, size_t count
)
2532 struct fsg_lun
*curlun
= fsg_lun_from_dev(dev
);
2533 struct rw_semaphore
*filesem
= dev_get_drvdata(dev
);
2535 return fsg_store_ro(curlun
, filesem
, buf
, count
);
2538 static ssize_t
nofua_store(struct device
*dev
, struct device_attribute
*attr
,
2539 const char *buf
, size_t count
)
2541 struct fsg_lun
*curlun
= fsg_lun_from_dev(dev
);
2543 return fsg_store_nofua(curlun
, buf
, count
);
2546 static ssize_t
file_store(struct device
*dev
, struct device_attribute
*attr
,
2547 const char *buf
, size_t count
)
2549 struct fsg_lun
*curlun
= fsg_lun_from_dev(dev
);
2550 struct rw_semaphore
*filesem
= dev_get_drvdata(dev
);
2552 return fsg_store_file(curlun
, filesem
, buf
, count
);
2555 static DEVICE_ATTR_RW(nofua
);
2556 /* mode wil be set in fsg_lun_attr_is_visible() */
2557 static DEVICE_ATTR(ro
, 0, ro_show
, ro_store
);
2558 static DEVICE_ATTR(file
, 0, file_show
, file_store
);
2560 /****************************** FSG COMMON ******************************/
2562 static void fsg_lun_release(struct device
*dev
)
2564 /* Nothing needs to be done */
2567 static struct fsg_common
*fsg_common_setup(struct fsg_common
*common
)
2570 common
= kzalloc(sizeof(*common
), GFP_KERNEL
);
2572 return ERR_PTR(-ENOMEM
);
2573 common
->free_storage_on_release
= 1;
2575 common
->free_storage_on_release
= 0;
2577 init_rwsem(&common
->filesem
);
2578 spin_lock_init(&common
->lock
);
2579 init_completion(&common
->thread_notifier
);
2580 init_waitqueue_head(&common
->io_wait
);
2581 init_waitqueue_head(&common
->fsg_wait
);
2582 common
->state
= FSG_STATE_TERMINATED
;
2583 memset(common
->luns
, 0, sizeof(common
->luns
));
2588 void fsg_common_set_sysfs(struct fsg_common
*common
, bool sysfs
)
2590 common
->sysfs
= sysfs
;
2592 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs
);
2594 static void _fsg_common_free_buffers(struct fsg_buffhd
*buffhds
, unsigned n
)
2597 struct fsg_buffhd
*bh
= buffhds
;
2606 int fsg_common_set_num_buffers(struct fsg_common
*common
, unsigned int n
)
2608 struct fsg_buffhd
*bh
, *buffhds
;
2611 buffhds
= kcalloc(n
, sizeof(*buffhds
), GFP_KERNEL
);
2615 /* Data buffers cyclic list */
2618 goto buffhds_first_it
;
2623 bh
->buf
= kmalloc(FSG_BUFLEN
, GFP_KERNEL
);
2624 if (unlikely(!bh
->buf
))
2629 _fsg_common_free_buffers(common
->buffhds
, common
->fsg_num_buffers
);
2630 common
->fsg_num_buffers
= n
;
2631 common
->buffhds
= buffhds
;
2637 * "buf"s pointed to by heads after n - i are NULL
2638 * so releasing them won't hurt
2640 _fsg_common_free_buffers(buffhds
, n
);
2644 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers
);
2646 void fsg_common_remove_lun(struct fsg_lun
*lun
)
2648 if (device_is_registered(&lun
->dev
))
2649 device_unregister(&lun
->dev
);
2653 EXPORT_SYMBOL_GPL(fsg_common_remove_lun
);
2655 static void _fsg_common_remove_luns(struct fsg_common
*common
, int n
)
2659 for (i
= 0; i
< n
; ++i
)
2660 if (common
->luns
[i
]) {
2661 fsg_common_remove_lun(common
->luns
[i
]);
2662 common
->luns
[i
] = NULL
;
2666 void fsg_common_remove_luns(struct fsg_common
*common
)
2668 _fsg_common_remove_luns(common
, ARRAY_SIZE(common
->luns
));
2670 EXPORT_SYMBOL_GPL(fsg_common_remove_luns
);
2672 void fsg_common_free_buffers(struct fsg_common
*common
)
2674 _fsg_common_free_buffers(common
->buffhds
, common
->fsg_num_buffers
);
2675 common
->buffhds
= NULL
;
2677 EXPORT_SYMBOL_GPL(fsg_common_free_buffers
);
2679 int fsg_common_set_cdev(struct fsg_common
*common
,
2680 struct usb_composite_dev
*cdev
, bool can_stall
)
2682 struct usb_string
*us
;
2684 common
->gadget
= cdev
->gadget
;
2685 common
->ep0
= cdev
->gadget
->ep0
;
2686 common
->ep0req
= cdev
->req
;
2687 common
->cdev
= cdev
;
2689 us
= usb_gstrings_attach(cdev
, fsg_strings_array
,
2690 ARRAY_SIZE(fsg_strings
));
2694 fsg_intf_desc
.iInterface
= us
[FSG_STRING_INTERFACE
].id
;
2697 * Some peripheral controllers are known not to be able to
2698 * halt bulk endpoints correctly. If one of them is present,
2701 common
->can_stall
= can_stall
&&
2702 gadget_is_stall_supported(common
->gadget
);
2706 EXPORT_SYMBOL_GPL(fsg_common_set_cdev
);
2708 static struct attribute
*fsg_lun_dev_attrs
[] = {
2710 &dev_attr_file
.attr
,
2711 &dev_attr_nofua
.attr
,
2715 static umode_t
fsg_lun_dev_is_visible(struct kobject
*kobj
,
2716 struct attribute
*attr
, int idx
)
2718 struct device
*dev
= kobj_to_dev(kobj
);
2719 struct fsg_lun
*lun
= fsg_lun_from_dev(dev
);
2721 if (attr
== &dev_attr_ro
.attr
)
2722 return lun
->cdrom
? S_IRUGO
: (S_IWUSR
| S_IRUGO
);
2723 if (attr
== &dev_attr_file
.attr
)
2724 return lun
->removable
? (S_IWUSR
| S_IRUGO
) : S_IRUGO
;
2728 static const struct attribute_group fsg_lun_dev_group
= {
2729 .attrs
= fsg_lun_dev_attrs
,
2730 .is_visible
= fsg_lun_dev_is_visible
,
2733 static const struct attribute_group
*fsg_lun_dev_groups
[] = {
2738 int fsg_common_create_lun(struct fsg_common
*common
, struct fsg_lun_config
*cfg
,
2739 unsigned int id
, const char *name
,
2740 const char **name_pfx
)
2742 struct fsg_lun
*lun
;
2746 if (id
>= ARRAY_SIZE(common
->luns
))
2749 if (common
->luns
[id
])
2752 if (!cfg
->filename
&& !cfg
->removable
) {
2753 pr_err("no file given for LUN%d\n", id
);
2757 lun
= kzalloc(sizeof(*lun
), GFP_KERNEL
);
2761 lun
->name_pfx
= name_pfx
;
2763 lun
->cdrom
= !!cfg
->cdrom
;
2764 lun
->ro
= cfg
->cdrom
|| cfg
->ro
;
2765 lun
->initially_ro
= lun
->ro
;
2766 lun
->removable
= !!cfg
->removable
;
2768 if (!common
->sysfs
) {
2769 /* we DON'T own the name!*/
2772 lun
->dev
.release
= fsg_lun_release
;
2773 lun
->dev
.parent
= &common
->gadget
->dev
;
2774 lun
->dev
.groups
= fsg_lun_dev_groups
;
2775 dev_set_drvdata(&lun
->dev
, &common
->filesem
);
2776 dev_set_name(&lun
->dev
, "%s", name
);
2777 lun
->name
= dev_name(&lun
->dev
);
2779 rc
= device_register(&lun
->dev
);
2781 pr_info("failed to register LUN%d: %d\n", id
, rc
);
2782 put_device(&lun
->dev
);
2787 common
->luns
[id
] = lun
;
2789 if (cfg
->filename
) {
2790 rc
= fsg_lun_open(lun
, cfg
->filename
);
2795 pathbuf
= kmalloc(PATH_MAX
, GFP_KERNEL
);
2797 if (fsg_lun_is_open(lun
)) {
2800 p
= file_path(lun
->filp
, pathbuf
, PATH_MAX
);
2805 pr_info("LUN: %s%s%sfile: %s\n",
2806 lun
->removable
? "removable " : "",
2807 lun
->ro
? "read only " : "",
2808 lun
->cdrom
? "CD-ROM " : "",
2815 if (device_is_registered(&lun
->dev
))
2816 device_unregister(&lun
->dev
);
2818 common
->luns
[id
] = NULL
;
2823 EXPORT_SYMBOL_GPL(fsg_common_create_lun
);
2825 int fsg_common_create_luns(struct fsg_common
*common
, struct fsg_config
*cfg
)
2827 char buf
[8]; /* enough for 100000000 different numbers, decimal */
2830 fsg_common_remove_luns(common
);
2832 for (i
= 0; i
< cfg
->nluns
; ++i
) {
2833 snprintf(buf
, sizeof(buf
), "lun%d", i
);
2834 rc
= fsg_common_create_lun(common
, &cfg
->luns
[i
], i
, buf
, NULL
);
2839 pr_info("Number of LUNs=%d\n", cfg
->nluns
);
2844 _fsg_common_remove_luns(common
, i
);
2847 EXPORT_SYMBOL_GPL(fsg_common_create_luns
);
2849 void fsg_common_set_inquiry_string(struct fsg_common
*common
, const char *vn
,
2854 /* Prepare inquiryString */
2855 i
= get_default_bcdDevice();
2856 snprintf(common
->inquiry_string
, sizeof(common
->inquiry_string
),
2857 "%-8s%-16s%04x", vn
?: "Linux",
2858 /* Assume product name dependent on the first LUN */
2859 pn
?: ((*common
->luns
)->cdrom
2861 : "File-Stor Gadget"),
2864 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string
);
2866 static void fsg_common_release(struct fsg_common
*common
)
2870 /* If the thread isn't already dead, tell it to exit now */
2871 if (common
->state
!= FSG_STATE_TERMINATED
) {
2872 raise_exception(common
, FSG_STATE_EXIT
);
2873 wait_for_completion(&common
->thread_notifier
);
2876 for (i
= 0; i
< ARRAY_SIZE(common
->luns
); ++i
) {
2877 struct fsg_lun
*lun
= common
->luns
[i
];
2881 if (device_is_registered(&lun
->dev
))
2882 device_unregister(&lun
->dev
);
2886 _fsg_common_free_buffers(common
->buffhds
, common
->fsg_num_buffers
);
2887 if (common
->free_storage_on_release
)
2892 /*-------------------------------------------------------------------------*/
2894 static int fsg_bind(struct usb_configuration
*c
, struct usb_function
*f
)
2896 struct fsg_dev
*fsg
= fsg_from_func(f
);
2897 struct fsg_common
*common
= fsg
->common
;
2898 struct usb_gadget
*gadget
= c
->cdev
->gadget
;
2903 struct fsg_opts
*opts
;
2905 /* Don't allow to bind if we don't have at least one LUN */
2906 ret
= _fsg_common_get_max_lun(common
);
2908 pr_err("There should be at least one LUN.\n");
2912 opts
= fsg_opts_from_func_inst(f
->fi
);
2913 if (!opts
->no_configfs
) {
2914 ret
= fsg_common_set_cdev(fsg
->common
, c
->cdev
,
2915 fsg
->common
->can_stall
);
2918 fsg_common_set_inquiry_string(fsg
->common
, NULL
, NULL
);
2921 if (!common
->thread_task
) {
2922 common
->state
= FSG_STATE_NORMAL
;
2923 common
->thread_task
=
2924 kthread_create(fsg_main_thread
, common
, "file-storage");
2925 if (IS_ERR(common
->thread_task
)) {
2926 ret
= PTR_ERR(common
->thread_task
);
2927 common
->thread_task
= NULL
;
2928 common
->state
= FSG_STATE_TERMINATED
;
2931 DBG(common
, "I/O thread pid: %d\n",
2932 task_pid_nr(common
->thread_task
));
2933 wake_up_process(common
->thread_task
);
2936 fsg
->gadget
= gadget
;
2939 i
= usb_interface_id(c
, f
);
2942 fsg_intf_desc
.bInterfaceNumber
= i
;
2943 fsg
->interface_number
= i
;
2945 /* Find all the endpoints we will use */
2946 ep
= usb_ep_autoconfig(gadget
, &fsg_fs_bulk_in_desc
);
2951 ep
= usb_ep_autoconfig(gadget
, &fsg_fs_bulk_out_desc
);
2956 /* Assume endpoint addresses are the same for both speeds */
2957 fsg_hs_bulk_in_desc
.bEndpointAddress
=
2958 fsg_fs_bulk_in_desc
.bEndpointAddress
;
2959 fsg_hs_bulk_out_desc
.bEndpointAddress
=
2960 fsg_fs_bulk_out_desc
.bEndpointAddress
;
2962 /* Calculate bMaxBurst, we know packet size is 1024 */
2963 max_burst
= min_t(unsigned, FSG_BUFLEN
/ 1024, 15);
2965 fsg_ss_bulk_in_desc
.bEndpointAddress
=
2966 fsg_fs_bulk_in_desc
.bEndpointAddress
;
2967 fsg_ss_bulk_in_comp_desc
.bMaxBurst
= max_burst
;
2969 fsg_ss_bulk_out_desc
.bEndpointAddress
=
2970 fsg_fs_bulk_out_desc
.bEndpointAddress
;
2971 fsg_ss_bulk_out_comp_desc
.bMaxBurst
= max_burst
;
2973 ret
= usb_assign_descriptors(f
, fsg_fs_function
, fsg_hs_function
,
2974 fsg_ss_function
, fsg_ss_function
);
2981 ERROR(fsg
, "unable to autoconfigure all endpoints\n");
2984 /* terminate the thread */
2985 if (fsg
->common
->state
!= FSG_STATE_TERMINATED
) {
2986 raise_exception(fsg
->common
, FSG_STATE_EXIT
);
2987 wait_for_completion(&fsg
->common
->thread_notifier
);
2992 /****************************** ALLOCATE FUNCTION *************************/
2994 static void fsg_unbind(struct usb_configuration
*c
, struct usb_function
*f
)
2996 struct fsg_dev
*fsg
= fsg_from_func(f
);
2997 struct fsg_common
*common
= fsg
->common
;
2999 DBG(fsg
, "unbind\n");
3000 if (fsg
->common
->fsg
== fsg
) {
3001 __raise_exception(fsg
->common
, FSG_STATE_CONFIG_CHANGE
, NULL
);
3002 /* FIXME: make interruptible or killable somehow? */
3003 wait_event(common
->fsg_wait
, common
->fsg
!= fsg
);
3006 usb_free_all_descriptors(&fsg
->function
);
3009 static inline struct fsg_lun_opts
*to_fsg_lun_opts(struct config_item
*item
)
3011 return container_of(to_config_group(item
), struct fsg_lun_opts
, group
);
3014 static inline struct fsg_opts
*to_fsg_opts(struct config_item
*item
)
3016 return container_of(to_config_group(item
), struct fsg_opts
,
3020 static void fsg_lun_attr_release(struct config_item
*item
)
3022 struct fsg_lun_opts
*lun_opts
;
3024 lun_opts
= to_fsg_lun_opts(item
);
3028 static struct configfs_item_operations fsg_lun_item_ops
= {
3029 .release
= fsg_lun_attr_release
,
3032 static ssize_t
fsg_lun_opts_file_show(struct config_item
*item
, char *page
)
3034 struct fsg_lun_opts
*opts
= to_fsg_lun_opts(item
);
3035 struct fsg_opts
*fsg_opts
= to_fsg_opts(opts
->group
.cg_item
.ci_parent
);
3037 return fsg_show_file(opts
->lun
, &fsg_opts
->common
->filesem
, page
);
3040 static ssize_t
fsg_lun_opts_file_store(struct config_item
*item
,
3041 const char *page
, size_t len
)
3043 struct fsg_lun_opts
*opts
= to_fsg_lun_opts(item
);
3044 struct fsg_opts
*fsg_opts
= to_fsg_opts(opts
->group
.cg_item
.ci_parent
);
3046 return fsg_store_file(opts
->lun
, &fsg_opts
->common
->filesem
, page
, len
);
3049 CONFIGFS_ATTR(fsg_lun_opts_
, file
);
3051 static ssize_t
fsg_lun_opts_ro_show(struct config_item
*item
, char *page
)
3053 return fsg_show_ro(to_fsg_lun_opts(item
)->lun
, page
);
3056 static ssize_t
fsg_lun_opts_ro_store(struct config_item
*item
,
3057 const char *page
, size_t len
)
3059 struct fsg_lun_opts
*opts
= to_fsg_lun_opts(item
);
3060 struct fsg_opts
*fsg_opts
= to_fsg_opts(opts
->group
.cg_item
.ci_parent
);
3062 return fsg_store_ro(opts
->lun
, &fsg_opts
->common
->filesem
, page
, len
);
3065 CONFIGFS_ATTR(fsg_lun_opts_
, ro
);
3067 static ssize_t
fsg_lun_opts_removable_show(struct config_item
*item
,
3070 return fsg_show_removable(to_fsg_lun_opts(item
)->lun
, page
);
3073 static ssize_t
fsg_lun_opts_removable_store(struct config_item
*item
,
3074 const char *page
, size_t len
)
3076 return fsg_store_removable(to_fsg_lun_opts(item
)->lun
, page
, len
);
3079 CONFIGFS_ATTR(fsg_lun_opts_
, removable
);
3081 static ssize_t
fsg_lun_opts_cdrom_show(struct config_item
*item
, char *page
)
3083 return fsg_show_cdrom(to_fsg_lun_opts(item
)->lun
, page
);
3086 static ssize_t
fsg_lun_opts_cdrom_store(struct config_item
*item
,
3087 const char *page
, size_t len
)
3089 struct fsg_lun_opts
*opts
= to_fsg_lun_opts(item
);
3090 struct fsg_opts
*fsg_opts
= to_fsg_opts(opts
->group
.cg_item
.ci_parent
);
3092 return fsg_store_cdrom(opts
->lun
, &fsg_opts
->common
->filesem
, page
,
3096 CONFIGFS_ATTR(fsg_lun_opts_
, cdrom
);
3098 static ssize_t
fsg_lun_opts_nofua_show(struct config_item
*item
, char *page
)
3100 return fsg_show_nofua(to_fsg_lun_opts(item
)->lun
, page
);
3103 static ssize_t
fsg_lun_opts_nofua_store(struct config_item
*item
,
3104 const char *page
, size_t len
)
3106 return fsg_store_nofua(to_fsg_lun_opts(item
)->lun
, page
, len
);
3109 CONFIGFS_ATTR(fsg_lun_opts_
, nofua
);
3111 static ssize_t
fsg_lun_opts_inquiry_string_show(struct config_item
*item
,
3114 return fsg_show_inquiry_string(to_fsg_lun_opts(item
)->lun
, page
);
3117 static ssize_t
fsg_lun_opts_inquiry_string_store(struct config_item
*item
,
3118 const char *page
, size_t len
)
3120 return fsg_store_inquiry_string(to_fsg_lun_opts(item
)->lun
, page
, len
);
3123 CONFIGFS_ATTR(fsg_lun_opts_
, inquiry_string
);
3125 static struct configfs_attribute
*fsg_lun_attrs
[] = {
3126 &fsg_lun_opts_attr_file
,
3127 &fsg_lun_opts_attr_ro
,
3128 &fsg_lun_opts_attr_removable
,
3129 &fsg_lun_opts_attr_cdrom
,
3130 &fsg_lun_opts_attr_nofua
,
3131 &fsg_lun_opts_attr_inquiry_string
,
3135 static const struct config_item_type fsg_lun_type
= {
3136 .ct_item_ops
= &fsg_lun_item_ops
,
3137 .ct_attrs
= fsg_lun_attrs
,
3138 .ct_owner
= THIS_MODULE
,
3141 static struct config_group
*fsg_lun_make(struct config_group
*group
,
3144 struct fsg_lun_opts
*opts
;
3145 struct fsg_opts
*fsg_opts
;
3146 struct fsg_lun_config config
;
3151 num_str
= strchr(name
, '.');
3153 pr_err("Unable to locate . in LUN.NUMBER\n");
3154 return ERR_PTR(-EINVAL
);
3158 ret
= kstrtou8(num_str
, 0, &num
);
3160 return ERR_PTR(ret
);
3162 fsg_opts
= to_fsg_opts(&group
->cg_item
);
3163 if (num
>= FSG_MAX_LUNS
)
3164 return ERR_PTR(-ERANGE
);
3165 num
= array_index_nospec(num
, FSG_MAX_LUNS
);
3167 mutex_lock(&fsg_opts
->lock
);
3168 if (fsg_opts
->refcnt
|| fsg_opts
->common
->luns
[num
]) {
3173 opts
= kzalloc(sizeof(*opts
), GFP_KERNEL
);
3179 memset(&config
, 0, sizeof(config
));
3180 config
.removable
= true;
3182 ret
= fsg_common_create_lun(fsg_opts
->common
, &config
, num
, name
,
3183 (const char **)&group
->cg_item
.ci_name
);
3188 opts
->lun
= fsg_opts
->common
->luns
[num
];
3190 mutex_unlock(&fsg_opts
->lock
);
3192 config_group_init_type_name(&opts
->group
, name
, &fsg_lun_type
);
3194 return &opts
->group
;
3196 mutex_unlock(&fsg_opts
->lock
);
3197 return ERR_PTR(ret
);
3200 static void fsg_lun_drop(struct config_group
*group
, struct config_item
*item
)
3202 struct fsg_lun_opts
*lun_opts
;
3203 struct fsg_opts
*fsg_opts
;
3205 lun_opts
= to_fsg_lun_opts(item
);
3206 fsg_opts
= to_fsg_opts(&group
->cg_item
);
3208 mutex_lock(&fsg_opts
->lock
);
3209 if (fsg_opts
->refcnt
) {
3210 struct config_item
*gadget
;
3212 gadget
= group
->cg_item
.ci_parent
->ci_parent
;
3213 unregister_gadget_item(gadget
);
3216 fsg_common_remove_lun(lun_opts
->lun
);
3217 fsg_opts
->common
->luns
[lun_opts
->lun_id
] = NULL
;
3218 lun_opts
->lun_id
= 0;
3219 mutex_unlock(&fsg_opts
->lock
);
3221 config_item_put(item
);
3224 static void fsg_attr_release(struct config_item
*item
)
3226 struct fsg_opts
*opts
= to_fsg_opts(item
);
3228 usb_put_function_instance(&opts
->func_inst
);
3231 static struct configfs_item_operations fsg_item_ops
= {
3232 .release
= fsg_attr_release
,
3235 static ssize_t
fsg_opts_stall_show(struct config_item
*item
, char *page
)
3237 struct fsg_opts
*opts
= to_fsg_opts(item
);
3240 mutex_lock(&opts
->lock
);
3241 result
= sprintf(page
, "%d", opts
->common
->can_stall
);
3242 mutex_unlock(&opts
->lock
);
3247 static ssize_t
fsg_opts_stall_store(struct config_item
*item
, const char *page
,
3250 struct fsg_opts
*opts
= to_fsg_opts(item
);
3254 mutex_lock(&opts
->lock
);
3257 mutex_unlock(&opts
->lock
);
3261 ret
= strtobool(page
, &stall
);
3263 opts
->common
->can_stall
= stall
;
3267 mutex_unlock(&opts
->lock
);
3272 CONFIGFS_ATTR(fsg_opts_
, stall
);
3274 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3275 static ssize_t
fsg_opts_num_buffers_show(struct config_item
*item
, char *page
)
3277 struct fsg_opts
*opts
= to_fsg_opts(item
);
3280 mutex_lock(&opts
->lock
);
3281 result
= sprintf(page
, "%d", opts
->common
->fsg_num_buffers
);
3282 mutex_unlock(&opts
->lock
);
3287 static ssize_t
fsg_opts_num_buffers_store(struct config_item
*item
,
3288 const char *page
, size_t len
)
3290 struct fsg_opts
*opts
= to_fsg_opts(item
);
3294 mutex_lock(&opts
->lock
);
3299 ret
= kstrtou8(page
, 0, &num
);
3303 ret
= fsg_common_set_num_buffers(opts
->common
, num
);
3309 mutex_unlock(&opts
->lock
);
3313 CONFIGFS_ATTR(fsg_opts_
, num_buffers
);
3316 static struct configfs_attribute
*fsg_attrs
[] = {
3317 &fsg_opts_attr_stall
,
3318 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3319 &fsg_opts_attr_num_buffers
,
3324 static struct configfs_group_operations fsg_group_ops
= {
3325 .make_group
= fsg_lun_make
,
3326 .drop_item
= fsg_lun_drop
,
3329 static const struct config_item_type fsg_func_type
= {
3330 .ct_item_ops
= &fsg_item_ops
,
3331 .ct_group_ops
= &fsg_group_ops
,
3332 .ct_attrs
= fsg_attrs
,
3333 .ct_owner
= THIS_MODULE
,
3336 static void fsg_free_inst(struct usb_function_instance
*fi
)
3338 struct fsg_opts
*opts
;
3340 opts
= fsg_opts_from_func_inst(fi
);
3341 fsg_common_release(opts
->common
);
3345 static struct usb_function_instance
*fsg_alloc_inst(void)
3347 struct fsg_opts
*opts
;
3348 struct fsg_lun_config config
;
3351 opts
= kzalloc(sizeof(*opts
), GFP_KERNEL
);
3353 return ERR_PTR(-ENOMEM
);
3354 mutex_init(&opts
->lock
);
3355 opts
->func_inst
.free_func_inst
= fsg_free_inst
;
3356 opts
->common
= fsg_common_setup(opts
->common
);
3357 if (IS_ERR(opts
->common
)) {
3358 rc
= PTR_ERR(opts
->common
);
3362 rc
= fsg_common_set_num_buffers(opts
->common
,
3363 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
);
3365 goto release_common
;
3367 pr_info(FSG_DRIVER_DESC
", version: " FSG_DRIVER_VERSION
"\n");
3369 memset(&config
, 0, sizeof(config
));
3370 config
.removable
= true;
3371 rc
= fsg_common_create_lun(opts
->common
, &config
, 0, "lun.0",
3372 (const char **)&opts
->func_inst
.group
.cg_item
.ci_name
);
3374 goto release_buffers
;
3376 opts
->lun0
.lun
= opts
->common
->luns
[0];
3377 opts
->lun0
.lun_id
= 0;
3379 config_group_init_type_name(&opts
->func_inst
.group
, "", &fsg_func_type
);
3381 config_group_init_type_name(&opts
->lun0
.group
, "lun.0", &fsg_lun_type
);
3382 configfs_add_default_group(&opts
->lun0
.group
, &opts
->func_inst
.group
);
3384 return &opts
->func_inst
;
3387 fsg_common_free_buffers(opts
->common
);
3389 kfree(opts
->common
);
3395 static void fsg_free(struct usb_function
*f
)
3397 struct fsg_dev
*fsg
;
3398 struct fsg_opts
*opts
;
3400 fsg
= container_of(f
, struct fsg_dev
, function
);
3401 opts
= container_of(f
->fi
, struct fsg_opts
, func_inst
);
3403 mutex_lock(&opts
->lock
);
3405 mutex_unlock(&opts
->lock
);
3410 static struct usb_function
*fsg_alloc(struct usb_function_instance
*fi
)
3412 struct fsg_opts
*opts
= fsg_opts_from_func_inst(fi
);
3413 struct fsg_common
*common
= opts
->common
;
3414 struct fsg_dev
*fsg
;
3416 fsg
= kzalloc(sizeof(*fsg
), GFP_KERNEL
);
3418 return ERR_PTR(-ENOMEM
);
3420 mutex_lock(&opts
->lock
);
3422 mutex_unlock(&opts
->lock
);
3424 fsg
->function
.name
= FSG_DRIVER_DESC
;
3425 fsg
->function
.bind
= fsg_bind
;
3426 fsg
->function
.unbind
= fsg_unbind
;
3427 fsg
->function
.setup
= fsg_setup
;
3428 fsg
->function
.set_alt
= fsg_set_alt
;
3429 fsg
->function
.disable
= fsg_disable
;
3430 fsg
->function
.free_func
= fsg_free
;
3432 fsg
->common
= common
;
3434 return &fsg
->function
;
3437 DECLARE_USB_FUNCTION_INIT(mass_storage
, fsg_alloc_inst
, fsg_alloc
);
3438 MODULE_LICENSE("GPL");
3439 MODULE_AUTHOR("Michal Nazarewicz");
3441 /************************* Module parameters *************************/
3444 void fsg_config_from_params(struct fsg_config
*cfg
,
3445 const struct fsg_module_parameters
*params
,
3446 unsigned int fsg_num_buffers
)
3448 struct fsg_lun_config
*lun
;
3451 /* Configure LUNs */
3453 min(params
->luns
?: (params
->file_count
?: 1u),
3454 (unsigned)FSG_MAX_LUNS
);
3455 for (i
= 0, lun
= cfg
->luns
; i
< cfg
->nluns
; ++i
, ++lun
) {
3456 lun
->ro
= !!params
->ro
[i
];
3457 lun
->cdrom
= !!params
->cdrom
[i
];
3458 lun
->removable
= !!params
->removable
[i
];
3460 params
->file_count
> i
&& params
->file
[i
][0]
3465 /* Let MSF use defaults */
3466 cfg
->vendor_name
= NULL
;
3467 cfg
->product_name
= NULL
;
3470 cfg
->private_data
= NULL
;
3473 cfg
->can_stall
= params
->stall
;
3474 cfg
->fsg_num_buffers
= fsg_num_buffers
;
3476 EXPORT_SYMBOL_GPL(fsg_config_from_params
);