WIP FPC-III support
[linux/fpc-iii.git] / drivers / usb / host / ohci-nxp.c
blob85878e8ad3311b316e0cc3a19da201e9bdccb9d9
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * driver for NXP USB Host devices
5 * Currently supported OHCI host devices:
6 * - NXP LPC32xx
8 * Authors: Dmitry Chigirev <source@mvista.com>
9 * Vitaly Wool <vitalywool@gmail.com>
11 * register initialization is based on code examples provided by Philips
12 * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
14 * NOTE: This driver does not have suspend/resume functionality
15 * This driver is intended for engineering development purposes only
17 * 2005-2006 (c) MontaVista Software, Inc.
19 #include <linux/clk.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/io.h>
22 #include <linux/i2c.h>
23 #include <linux/module.h>
24 #include <linux/of.h>
25 #include <linux/platform_device.h>
26 #include <linux/usb/isp1301.h>
27 #include <linux/usb.h>
28 #include <linux/usb/hcd.h>
30 #include "ohci.h"
32 #define USB_CONFIG_BASE 0x31020000
34 /* USB_OTG_STAT_CONTROL bit defines */
35 #define TRANSPARENT_I2C_EN (1 << 7)
36 #define HOST_EN (1 << 0)
38 /* On LPC32xx, those are undefined */
39 #ifndef start_int_set_falling_edge
40 #define start_int_set_falling_edge(irq)
41 #define start_int_set_rising_edge(irq)
42 #define start_int_ack(irq)
43 #define start_int_mask(irq)
44 #define start_int_umask(irq)
45 #endif
47 #define DRIVER_DESC "OHCI NXP driver"
49 static const char hcd_name[] = "ohci-nxp";
50 static struct hc_driver __read_mostly ohci_nxp_hc_driver;
52 static struct i2c_client *isp1301_i2c_client;
54 static struct clk *usb_host_clk;
56 static void isp1301_configure_lpc32xx(void)
58 /* LPC32XX only supports DAT_SE0 USB mode */
59 /* This sequence is important */
61 /* Disable transparent UART mode first */
62 i2c_smbus_write_byte_data(isp1301_i2c_client,
63 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
64 MC1_UART_EN);
65 i2c_smbus_write_byte_data(isp1301_i2c_client,
66 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
67 ~MC1_SPEED_REG);
68 i2c_smbus_write_byte_data(isp1301_i2c_client,
69 ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
70 i2c_smbus_write_byte_data(isp1301_i2c_client,
71 (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
72 ~0);
73 i2c_smbus_write_byte_data(isp1301_i2c_client,
74 ISP1301_I2C_MODE_CONTROL_2,
75 (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
76 i2c_smbus_write_byte_data(isp1301_i2c_client,
77 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
78 i2c_smbus_write_byte_data(isp1301_i2c_client,
79 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
80 i2c_smbus_write_byte_data(isp1301_i2c_client,
81 ISP1301_I2C_OTG_CONTROL_1,
82 (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
83 i2c_smbus_write_byte_data(isp1301_i2c_client,
84 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
85 (OTG1_DM_PULLUP | OTG1_DP_PULLUP));
86 i2c_smbus_write_byte_data(isp1301_i2c_client,
87 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
88 i2c_smbus_write_byte_data(isp1301_i2c_client,
89 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
90 ~0);
91 i2c_smbus_write_byte_data(isp1301_i2c_client,
92 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
94 printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
95 i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
96 printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
97 i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
98 printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
99 i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
102 static void isp1301_configure(void)
104 isp1301_configure_lpc32xx();
107 static inline void isp1301_vbus_on(void)
109 i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
110 OTG1_VBUS_DRV);
113 static inline void isp1301_vbus_off(void)
115 i2c_smbus_write_byte_data(isp1301_i2c_client,
116 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
117 OTG1_VBUS_DRV);
120 static void ohci_nxp_start_hc(void)
122 void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
123 unsigned long tmp;
125 if (WARN_ON(!usb_otg_stat_control))
126 return;
128 tmp = __raw_readl(usb_otg_stat_control) | HOST_EN;
130 __raw_writel(tmp, usb_otg_stat_control);
131 isp1301_vbus_on();
133 iounmap(usb_otg_stat_control);
136 static void ohci_nxp_stop_hc(void)
138 void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
139 unsigned long tmp;
141 if (WARN_ON(!usb_otg_stat_control))
142 return;
144 isp1301_vbus_off();
145 tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN;
146 __raw_writel(tmp, usb_otg_stat_control);
148 iounmap(usb_otg_stat_control);
151 static int ohci_hcd_nxp_probe(struct platform_device *pdev)
153 struct usb_hcd *hcd = NULL;
154 const struct hc_driver *driver = &ohci_nxp_hc_driver;
155 struct resource *res;
156 int ret = 0, irq;
157 struct device_node *isp1301_node;
159 if (pdev->dev.of_node) {
160 isp1301_node = of_parse_phandle(pdev->dev.of_node,
161 "transceiver", 0);
162 } else {
163 isp1301_node = NULL;
166 isp1301_i2c_client = isp1301_get_client(isp1301_node);
167 if (!isp1301_i2c_client)
168 return -EPROBE_DEFER;
170 ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
171 if (ret)
172 goto fail_disable;
174 dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
175 if (usb_disabled()) {
176 dev_err(&pdev->dev, "USB is disabled\n");
177 ret = -ENODEV;
178 goto fail_disable;
181 /* Enable USB host clock */
182 usb_host_clk = devm_clk_get(&pdev->dev, NULL);
183 if (IS_ERR(usb_host_clk)) {
184 dev_err(&pdev->dev, "failed to acquire USB OHCI clock\n");
185 ret = PTR_ERR(usb_host_clk);
186 goto fail_disable;
189 ret = clk_prepare_enable(usb_host_clk);
190 if (ret < 0) {
191 dev_err(&pdev->dev, "failed to start USB OHCI clock\n");
192 goto fail_disable;
195 isp1301_configure();
197 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
198 if (!hcd) {
199 dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
200 ret = -ENOMEM;
201 goto fail_hcd;
204 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
205 hcd->regs = devm_ioremap_resource(&pdev->dev, res);
206 if (IS_ERR(hcd->regs)) {
207 ret = PTR_ERR(hcd->regs);
208 goto fail_resource;
210 hcd->rsrc_start = res->start;
211 hcd->rsrc_len = resource_size(res);
213 irq = platform_get_irq(pdev, 0);
214 if (irq < 0) {
215 ret = -ENXIO;
216 goto fail_resource;
219 ohci_nxp_start_hc();
220 platform_set_drvdata(pdev, hcd);
222 dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
223 ret = usb_add_hcd(hcd, irq, 0);
224 if (ret == 0) {
225 device_wakeup_enable(hcd->self.controller);
226 return ret;
229 ohci_nxp_stop_hc();
230 fail_resource:
231 usb_put_hcd(hcd);
232 fail_hcd:
233 clk_disable_unprepare(usb_host_clk);
234 fail_disable:
235 isp1301_i2c_client = NULL;
236 return ret;
239 static int ohci_hcd_nxp_remove(struct platform_device *pdev)
241 struct usb_hcd *hcd = platform_get_drvdata(pdev);
243 usb_remove_hcd(hcd);
244 ohci_nxp_stop_hc();
245 usb_put_hcd(hcd);
246 clk_disable_unprepare(usb_host_clk);
247 isp1301_i2c_client = NULL;
249 return 0;
252 /* work with hotplug and coldplug */
253 MODULE_ALIAS("platform:usb-ohci");
255 #ifdef CONFIG_OF
256 static const struct of_device_id ohci_hcd_nxp_match[] = {
257 { .compatible = "nxp,ohci-nxp" },
260 MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
261 #endif
263 static struct platform_driver ohci_hcd_nxp_driver = {
264 .driver = {
265 .name = "usb-ohci",
266 .of_match_table = of_match_ptr(ohci_hcd_nxp_match),
268 .probe = ohci_hcd_nxp_probe,
269 .remove = ohci_hcd_nxp_remove,
272 static int __init ohci_nxp_init(void)
274 if (usb_disabled())
275 return -ENODEV;
277 pr_info("%s: " DRIVER_DESC "\n", hcd_name);
279 ohci_init_driver(&ohci_nxp_hc_driver, NULL);
280 return platform_driver_register(&ohci_hcd_nxp_driver);
282 module_init(ohci_nxp_init);
284 static void __exit ohci_nxp_cleanup(void)
286 platform_driver_unregister(&ohci_hcd_nxp_driver);
288 module_exit(ohci_nxp_cleanup);
290 MODULE_DESCRIPTION(DRIVER_DESC);
291 MODULE_LICENSE("GPL v2");