1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2008-2009 ST-Ericsson AB
6 * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core
7 * Author: Linus Walleij <linus.walleij@stericsson.com>
9 #include <linux/moduleparam.h>
10 #include <linux/mod_devicetable.h>
11 #include <linux/types.h>
12 #include <linux/watchdog.h>
13 #include <linux/interrupt.h>
15 #include <linux/platform_device.h>
17 #include <linux/bitops.h>
18 #include <linux/clk.h>
19 #include <linux/delay.h>
20 #include <linux/err.h>
22 #define DRV_NAME "WDOG COH 901 327"
25 * COH 901 327 register definitions
28 /* WDOG_FEED Register 32bit (-/W) */
29 #define U300_WDOG_FR 0x00
30 #define U300_WDOG_FR_FEED_RESTART_TIMER 0xFEEDU
31 /* WDOG_TIMEOUT Register 32bit (R/W) */
32 #define U300_WDOG_TR 0x04
33 #define U300_WDOG_TR_TIMEOUT_MASK 0x7FFFU
34 /* WDOG_DISABLE1 Register 32bit (-/W) */
35 #define U300_WDOG_D1R 0x08
36 #define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER 0x2BADU
37 /* WDOG_DISABLE2 Register 32bit (R/W) */
38 #define U300_WDOG_D2R 0x0C
39 #define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER 0xCAFEU
40 #define U300_WDOG_D2R_DISABLE_STATUS_DISABLED 0xDABEU
41 #define U300_WDOG_D2R_DISABLE_STATUS_ENABLED 0x0000U
42 /* WDOG_STATUS Register 32bit (R/W) */
43 #define U300_WDOG_SR 0x10
44 #define U300_WDOG_SR_STATUS_TIMED_OUT 0xCFE8U
45 #define U300_WDOG_SR_STATUS_NORMAL 0x0000U
46 #define U300_WDOG_SR_RESET_STATUS_RESET 0xE8B4U
47 /* WDOG_COUNT Register 32bit (R/-) */
48 #define U300_WDOG_CR 0x14
49 #define U300_WDOG_CR_VALID_IND 0x8000U
50 #define U300_WDOG_CR_VALID_STABLE 0x0000U
51 #define U300_WDOG_CR_COUNT_VALUE_MASK 0x7FFFU
52 /* WDOG_JTAGOVR Register 32bit (R/W) */
53 #define U300_WDOG_JOR 0x18
54 #define U300_WDOG_JOR_JTAG_MODE_IND 0x0002U
55 #define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE 0x0001U
56 /* WDOG_RESTART Register 32bit (-/W) */
57 #define U300_WDOG_RR 0x1C
58 #define U300_WDOG_RR_RESTART_VALUE_RESUME 0xACEDU
59 /* WDOG_IRQ_EVENT Register 32bit (R/W) */
60 #define U300_WDOG_IER 0x20
61 #define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND 0x0001U
62 #define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE 0x0001U
63 /* WDOG_IRQ_MASK Register 32bit (R/W) */
64 #define U300_WDOG_IMR 0x24
65 #define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE 0x0001U
66 /* WDOG_IRQ_FORCE Register 32bit (R/W) */
67 #define U300_WDOG_IFR 0x28
68 #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U
70 /* Default timeout in seconds = 1 minute */
71 #define U300_WDOG_DEFAULT_TIMEOUT 60
73 static unsigned int margin
;
75 static void __iomem
*virtbase
;
76 static struct device
*parent
;
78 static struct clk
*clk
;
81 * Enabling and disabling functions.
83 static void coh901327_enable(u16 timeout
)
87 unsigned long delay_ns
;
89 /* Restart timer if it is disabled */
90 val
= readw(virtbase
+ U300_WDOG_D2R
);
91 if (val
== U300_WDOG_D2R_DISABLE_STATUS_DISABLED
)
92 writew(U300_WDOG_RR_RESTART_VALUE_RESUME
,
93 virtbase
+ U300_WDOG_RR
);
94 /* Acknowledge any pending interrupt so it doesn't just fire off */
95 writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE
,
96 virtbase
+ U300_WDOG_IER
);
98 * The interrupt is cleared in the 32 kHz clock domain.
99 * Wait 3 32 kHz cycles for it to take effect
101 freq
= clk_get_rate(clk
);
102 delay_ns
= DIV_ROUND_UP(1000000000, freq
); /* Freq to ns and round up */
103 delay_ns
= 3 * delay_ns
; /* Wait 3 cycles */
105 /* Enable the watchdog interrupt */
106 writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE
, virtbase
+ U300_WDOG_IMR
);
107 /* Activate the watchdog timer */
108 writew(timeout
, virtbase
+ U300_WDOG_TR
);
109 /* Start the watchdog timer */
110 writew(U300_WDOG_FR_FEED_RESTART_TIMER
, virtbase
+ U300_WDOG_FR
);
112 * Extra read so that this change propagate in the watchdog.
114 (void) readw(virtbase
+ U300_WDOG_CR
);
115 val
= readw(virtbase
+ U300_WDOG_D2R
);
116 if (val
!= U300_WDOG_D2R_DISABLE_STATUS_ENABLED
)
118 "%s(): watchdog not enabled! D2R value %04x\n",
122 static void coh901327_disable(void)
126 /* Disable the watchdog interrupt if it is active */
127 writew(0x0000U
, virtbase
+ U300_WDOG_IMR
);
128 /* If the watchdog is currently enabled, attempt to disable it */
129 val
= readw(virtbase
+ U300_WDOG_D2R
);
130 if (val
!= U300_WDOG_D2R_DISABLE_STATUS_DISABLED
) {
131 writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER
,
132 virtbase
+ U300_WDOG_D1R
);
133 writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER
,
134 virtbase
+ U300_WDOG_D2R
);
135 /* Write this twice (else problems occur) */
136 writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER
,
137 virtbase
+ U300_WDOG_D2R
);
139 val
= readw(virtbase
+ U300_WDOG_D2R
);
140 if (val
!= U300_WDOG_D2R_DISABLE_STATUS_DISABLED
)
142 "%s(): watchdog not disabled! D2R value %04x\n",
146 static int coh901327_start(struct watchdog_device
*wdt_dev
)
148 coh901327_enable(wdt_dev
->timeout
* 100);
152 static int coh901327_stop(struct watchdog_device
*wdt_dev
)
158 static int coh901327_ping(struct watchdog_device
*wdd
)
160 /* Feed the watchdog */
161 writew(U300_WDOG_FR_FEED_RESTART_TIMER
,
162 virtbase
+ U300_WDOG_FR
);
166 static int coh901327_settimeout(struct watchdog_device
*wdt_dev
,
169 wdt_dev
->timeout
= time
;
170 /* Set new timeout value */
171 writew(time
* 100, virtbase
+ U300_WDOG_TR
);
173 writew(U300_WDOG_FR_FEED_RESTART_TIMER
,
174 virtbase
+ U300_WDOG_FR
);
178 static unsigned int coh901327_gettimeleft(struct watchdog_device
*wdt_dev
)
182 /* Read repeatedly until the value is stable! */
183 val
= readw(virtbase
+ U300_WDOG_CR
);
184 while (val
& U300_WDOG_CR_VALID_IND
)
185 val
= readw(virtbase
+ U300_WDOG_CR
);
186 val
&= U300_WDOG_CR_COUNT_VALUE_MASK
;
194 * This interrupt occurs 10 ms before the watchdog WILL bark.
196 static irqreturn_t
coh901327_interrupt(int irq
, void *data
)
201 * Ack IRQ? If this occurs we're FUBAR anyway, so
202 * just acknowledge, disable the interrupt and await the imminent end.
203 * If you at some point need a host of callbacks to be called
204 * when the system is about to watchdog-reset, add them here!
206 * NOTE: on future versions of this IP-block, it will be possible
207 * to prevent a watchdog reset by feeding the watchdog at this
210 val
= readw(virtbase
+ U300_WDOG_IER
);
211 if (val
== U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND
)
212 writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE
,
213 virtbase
+ U300_WDOG_IER
);
214 writew(0x0000U
, virtbase
+ U300_WDOG_IMR
);
215 dev_crit(parent
, "watchdog is barking!\n");
219 static const struct watchdog_info coh901327_ident
= {
220 .options
= WDIOF_CARDRESET
| WDIOF_SETTIMEOUT
| WDIOF_KEEPALIVEPING
,
221 .identity
= DRV_NAME
,
224 static const struct watchdog_ops coh901327_ops
= {
225 .owner
= THIS_MODULE
,
226 .start
= coh901327_start
,
227 .stop
= coh901327_stop
,
228 .ping
= coh901327_ping
,
229 .set_timeout
= coh901327_settimeout
,
230 .get_timeleft
= coh901327_gettimeleft
,
233 static struct watchdog_device coh901327_wdt
= {
234 .info
= &coh901327_ident
,
235 .ops
= &coh901327_ops
,
237 * Max timeout is 327 since the 10ms
238 * timeout register is max
239 * 0x7FFF = 327670ms ~= 327s.
243 .timeout
= U300_WDOG_DEFAULT_TIMEOUT
,
246 static int __init
coh901327_probe(struct platform_device
*pdev
)
248 struct device
*dev
= &pdev
->dev
;
254 virtbase
= devm_platform_ioremap_resource(pdev
, 0);
255 if (IS_ERR(virtbase
))
256 return PTR_ERR(virtbase
);
258 clk
= clk_get(dev
, NULL
);
261 dev_err(dev
, "could not get clock\n");
264 ret
= clk_prepare_enable(clk
);
266 dev_err(dev
, "could not prepare and enable clock\n");
267 goto out_no_clk_enable
;
270 val
= readw(virtbase
+ U300_WDOG_SR
);
272 case U300_WDOG_SR_STATUS_TIMED_OUT
:
273 dev_info(dev
, "watchdog timed out since last chip reset!\n");
274 coh901327_wdt
.bootstatus
|= WDIOF_CARDRESET
;
275 /* Status will be cleared below */
277 case U300_WDOG_SR_STATUS_NORMAL
:
278 dev_info(dev
, "in normal status, no timeouts have occurred.\n");
281 dev_info(dev
, "contains an illegal status code (%08x)\n", val
);
285 val
= readw(virtbase
+ U300_WDOG_D2R
);
287 case U300_WDOG_D2R_DISABLE_STATUS_DISABLED
:
288 dev_info(dev
, "currently disabled.\n");
290 case U300_WDOG_D2R_DISABLE_STATUS_ENABLED
:
291 dev_info(dev
, "currently enabled! (disabling it now)\n");
295 dev_err(dev
, "contains an illegal enable/disable code (%08x)\n",
300 /* Reset the watchdog */
301 writew(U300_WDOG_SR_RESET_STATUS_RESET
, virtbase
+ U300_WDOG_SR
);
303 irq
= platform_get_irq(pdev
, 0);
304 if (request_irq(irq
, coh901327_interrupt
, 0,
305 DRV_NAME
" Bark", pdev
)) {
310 watchdog_init_timeout(&coh901327_wdt
, margin
, dev
);
312 coh901327_wdt
.parent
= dev
;
313 ret
= watchdog_register_device(&coh901327_wdt
);
317 dev_info(dev
, "initialized. (timeout=%d sec)\n",
318 coh901327_wdt
.timeout
);
324 clk_disable_unprepare(clk
);
332 static u16 wdogenablestore
;
333 static u16 irqmaskstore
;
335 static int coh901327_suspend(struct platform_device
*pdev
, pm_message_t state
)
337 irqmaskstore
= readw(virtbase
+ U300_WDOG_IMR
) & 0x0001U
;
338 wdogenablestore
= readw(virtbase
+ U300_WDOG_D2R
);
339 /* If watchdog is on, disable it here and now */
340 if (wdogenablestore
== U300_WDOG_D2R_DISABLE_STATUS_ENABLED
)
345 static int coh901327_resume(struct platform_device
*pdev
)
347 /* Restore the watchdog interrupt */
348 writew(irqmaskstore
, virtbase
+ U300_WDOG_IMR
);
349 if (wdogenablestore
== U300_WDOG_D2R_DISABLE_STATUS_ENABLED
) {
350 /* Restart the watchdog timer */
351 writew(U300_WDOG_RR_RESTART_VALUE_RESUME
,
352 virtbase
+ U300_WDOG_RR
);
353 writew(U300_WDOG_FR_FEED_RESTART_TIMER
,
354 virtbase
+ U300_WDOG_FR
);
359 #define coh901327_suspend NULL
360 #define coh901327_resume NULL
364 * Mistreating the watchdog is the only way to perform a software reset of the
365 * system on EMP platforms. So we implement this and export a symbol for it.
367 void coh901327_watchdog_reset(void)
369 /* Enable even if on JTAG too */
370 writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE
,
371 virtbase
+ U300_WDOG_JOR
);
373 * Timeout = 5s, we have to wait for the watchdog reset to
374 * actually take place: the watchdog will be reloaded with the
375 * default value immediately, so we HAVE to reboot and get back
376 * into the kernel in 30s, or the device will reboot again!
377 * The boot loader will typically deactivate the watchdog, so we
378 * need time enough for the boot loader to get to the point of
379 * deactivating the watchdog before it is shut down by it.
381 * NOTE: on future versions of the watchdog, this restriction is
382 * gone: the watchdog will be reloaded with a default value (1 min)
383 * instead of last value, and you can conveniently set the watchdog
384 * timeout to 10ms (value = 1) without any problems.
386 coh901327_enable(500);
387 /* Return and await doom */
390 static const struct of_device_id coh901327_dt_match
[] = {
391 { .compatible
= "stericsson,coh901327" },
395 static struct platform_driver coh901327_driver
= {
397 .name
= "coh901327_wdog",
398 .of_match_table
= coh901327_dt_match
,
399 .suppress_bind_attrs
= true,
401 .suspend
= coh901327_suspend
,
402 .resume
= coh901327_resume
,
404 builtin_platform_driver_probe(coh901327_driver
, coh901327_probe
);
406 /* not really modular, but ... */
407 module_param(margin
, uint
, 0);
408 MODULE_PARM_DESC(margin
, "Watchdog margin in seconds (default 60s)");