1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * Copyright (C) 2016 Noralf Trønnes
6 #ifndef __LINUX_DRM_SIMPLE_KMS_HELPER_H
7 #define __LINUX_DRM_SIMPLE_KMS_HELPER_H
9 #include <drm/drm_crtc.h>
10 #include <drm/drm_encoder.h>
11 #include <drm/drm_plane.h>
13 struct drm_simple_display_pipe
;
16 * struct drm_simple_display_pipe_funcs - helper operations for a simple
19 struct drm_simple_display_pipe_funcs
{
23 * This callback is used to check if a specific mode is valid in the
24 * crtc used in this simple display pipe. This should be implemented
25 * if the display pipe has some sort of restriction in the modes
26 * it can display. For example, a given display pipe may be responsible
27 * to set a clock value. If the clock can not produce all the values
28 * for the available modes then this callback can be used to restrict
29 * the number of modes to only the ones that can be displayed. Another
30 * reason can be bandwidth mitigation: the memory port on the display
31 * controller can have bandwidth limitations not allowing pixel data
32 * to be fetched at any rate.
34 * This hook is used by the probe helpers to filter the mode list in
35 * drm_helper_probe_single_connector_modes(), and it is used by the
36 * atomic helpers to validate modes supplied by userspace in
37 * drm_atomic_helper_check_modeset().
39 * This function is optional.
43 * Since this function is both called from the check phase of an atomic
44 * commit, and the mode validation in the probe paths it is not allowed
45 * to look at anything else but the passed-in mode, and validate it
46 * against configuration-invariant hardware constraints.
50 * drm_mode_status Enum
52 enum drm_mode_status (*mode_valid
)(struct drm_simple_display_pipe
*pipe
,
53 const struct drm_display_mode
*mode
);
58 * This function should be used to enable the pipeline.
59 * It is called when the underlying crtc is enabled.
60 * This hook is optional.
62 void (*enable
)(struct drm_simple_display_pipe
*pipe
,
63 struct drm_crtc_state
*crtc_state
,
64 struct drm_plane_state
*plane_state
);
68 * This function should be used to disable the pipeline.
69 * It is called when the underlying crtc is disabled.
70 * This hook is optional.
72 void (*disable
)(struct drm_simple_display_pipe
*pipe
);
77 * This function is called in the check phase of an atomic update,
78 * specifically when the underlying plane is checked.
79 * The simple display pipeline helpers already check that the plane is
80 * not scaled, fills the entire visible area and is always enabled
81 * when the crtc is also enabled.
82 * This hook is optional.
86 * 0 on success, -EINVAL if the state or the transition can't be
87 * supported, -ENOMEM on memory allocation failure and -EDEADLK if an
88 * attempt to obtain another state object ran into a &drm_modeset_lock
91 int (*check
)(struct drm_simple_display_pipe
*pipe
,
92 struct drm_plane_state
*plane_state
,
93 struct drm_crtc_state
*crtc_state
);
97 * This function is called when the underlying plane state is updated.
98 * This hook is optional.
100 * This is the function drivers should submit the
101 * &drm_pending_vblank_event from. Using either
102 * drm_crtc_arm_vblank_event(), when the driver supports vblank
103 * interrupt handling, or drm_crtc_send_vblank_event() for more
104 * complex case. In case the hardware lacks vblank support entirely,
105 * drivers can set &struct drm_crtc_state.no_vblank in
106 * &struct drm_simple_display_pipe_funcs.check and let DRM's
107 * atomic helper fake a vblank event.
109 void (*update
)(struct drm_simple_display_pipe
*pipe
,
110 struct drm_plane_state
*old_plane_state
);
115 * Optional, called by &drm_plane_helper_funcs.prepare_fb. Please read
116 * the documentation for the &drm_plane_helper_funcs.prepare_fb hook for
119 * Drivers which always have their buffers pinned should use
120 * drm_gem_fb_simple_display_pipe_prepare_fb() for this hook.
122 int (*prepare_fb
)(struct drm_simple_display_pipe
*pipe
,
123 struct drm_plane_state
*plane_state
);
128 * Optional, called by &drm_plane_helper_funcs.cleanup_fb. Please read
129 * the documentation for the &drm_plane_helper_funcs.cleanup_fb hook for
132 void (*cleanup_fb
)(struct drm_simple_display_pipe
*pipe
,
133 struct drm_plane_state
*plane_state
);
138 * Optional, called by &drm_crtc_funcs.enable_vblank. Please read
139 * the documentation for the &drm_crtc_funcs.enable_vblank hook for
142 int (*enable_vblank
)(struct drm_simple_display_pipe
*pipe
);
147 * Optional, called by &drm_crtc_funcs.disable_vblank. Please read
148 * the documentation for the &drm_crtc_funcs.disable_vblank hook for
151 void (*disable_vblank
)(struct drm_simple_display_pipe
*pipe
);
155 * struct drm_simple_display_pipe - simple display pipeline
156 * @crtc: CRTC control structure
157 * @plane: Plane control structure
158 * @encoder: Encoder control structure
159 * @connector: Connector control structure
160 * @funcs: Pipeline control functions (optional)
162 * Simple display pipeline with plane, crtc and encoder collapsed into one
163 * entity. It should be initialized by calling drm_simple_display_pipe_init().
165 struct drm_simple_display_pipe
{
166 struct drm_crtc crtc
;
167 struct drm_plane plane
;
168 struct drm_encoder encoder
;
169 struct drm_connector
*connector
;
171 const struct drm_simple_display_pipe_funcs
*funcs
;
174 int drm_simple_display_pipe_attach_bridge(struct drm_simple_display_pipe
*pipe
,
175 struct drm_bridge
*bridge
);
177 int drm_simple_display_pipe_init(struct drm_device
*dev
,
178 struct drm_simple_display_pipe
*pipe
,
179 const struct drm_simple_display_pipe_funcs
*funcs
,
180 const uint32_t *formats
, unsigned int format_count
,
181 const uint64_t *format_modifiers
,
182 struct drm_connector
*connector
);
184 int drm_simple_encoder_init(struct drm_device
*dev
,
185 struct drm_encoder
*encoder
,
188 #endif /* __LINUX_DRM_SIMPLE_KMS_HELPER_H */