| blob | 0acfaaef4772e7f150201106420720d834cfdddf |
1 [
2 {
3 "EventCode": "0x100f2",
4 "EventName": "PM_1PLUS_PPC_CMPL",
5 "BriefDescription": "1 or more ppc insts finished",
6 "PublicDescription": "1 or more ppc insts finished (completed)"
7 },
8 {
9 "EventCode": "0x400f2",
10 "EventName": "PM_1PLUS_PPC_DISP",
11 "BriefDescription": "Cycles at least one Instr Dispatched",
12 "PublicDescription": "Cycles at least one Instr Dispatched. Could be a group with only microcode. Issue HW016521"
13 },
14 {
15 "EventCode": "0x100fa",
16 "EventName": "PM_ANY_THRD_RUN_CYC",
17 "BriefDescription": "One of threads in run_cycles",
18 "PublicDescription": "Any thread in run_cycles (was one thread in run_cycles)"
19 },
20 {
21 "EventCode": "0x4000a",
22 "EventName": "PM_CMPLU_STALL",
23 "BriefDescription": "Completion stall",
24 "PublicDescription": ""
25 },
26 {
27 "EventCode": "0x4d018",
28 "EventName": "PM_CMPLU_STALL_BRU",
29 "BriefDescription": "Completion stall due to a Branch Unit",
30 "PublicDescription": ""
31 },
32 {
33 "EventCode": "0x2c012",
34 "EventName": "PM_CMPLU_STALL_DCACHE_MISS",
35 "BriefDescription": "Completion stall by Dcache miss",
36 "PublicDescription": ""
37 },
38 {
39 "EventCode": "0x2c018",
40 "EventName": "PM_CMPLU_STALL_DMISS_L21_L31",
41 "BriefDescription": "Completion stall by Dcache miss which resolved on chip ( excluding local L2/L3)",
42 "PublicDescription": ""
43 },
44 {
45 "EventCode": "0x2c016",
46 "EventName": "PM_CMPLU_STALL_DMISS_L2L3",
47 "BriefDescription": "Completion stall by Dcache miss which resolved in L2/L3",
48 "PublicDescription": ""
49 },
50 {
51 "EventCode": "0x4c016",
52 "EventName": "PM_CMPLU_STALL_DMISS_L2L3_CONFLICT",
53 "BriefDescription": "Completion stall due to cache miss that resolves in the L2 or L3 with a conflict",
54 "PublicDescription": "Completion stall due to cache miss resolving in core's L2/L3 with a conflict"
55 },
56 {
57 "EventCode": "0x4c01a",
58 "EventName": "PM_CMPLU_STALL_DMISS_L3MISS",
59 "BriefDescription": "Completion stall due to cache miss resolving missed the L3",
60 "PublicDescription": ""
61 },
62 {
63 "EventCode": "0x4c018",
64 "EventName": "PM_CMPLU_STALL_DMISS_LMEM",
65 "BriefDescription": "Completion stall due to cache miss that resolves in local memory",
66 "PublicDescription": "Completion stall due to cache miss resolving in core's Local Memory"
67 },
68 {
69 "EventCode": "0x2c01c",
70 "EventName": "PM_CMPLU_STALL_DMISS_REMOTE",
71 "BriefDescription": "Completion stall by Dcache miss which resolved from remote chip (cache or memory)",
72 "PublicDescription": "Completion stall by Dcache miss which resolved on chip ( excluding local L2/L3)"
73 },
74 {
75 "EventCode": "0x4c012",
76 "EventName": "PM_CMPLU_STALL_ERAT_MISS",
77 "BriefDescription": "Completion stall due to LSU reject ERAT miss",
78 "PublicDescription": ""
79 },
80 {
81 "EventCode": "0x4d016",
82 "EventName": "PM_CMPLU_STALL_FXLONG",
83 "BriefDescription": "Completion stall due to a long latency fixed point instruction",
84 "PublicDescription": ""
85 },
86 {
87 "EventCode": "0x2d016",
88 "EventName": "PM_CMPLU_STALL_FXU",
89 "BriefDescription": "Completion stall due to FXU",
90 "PublicDescription": ""
91 },
92 {
93 "EventCode": "0x30036",
94 "EventName": "PM_CMPLU_STALL_HWSYNC",
95 "BriefDescription": "completion stall due to hwsync",
96 "PublicDescription": ""
97 },
98 {
99 "EventCode": "0x4d014",
100 "EventName": "PM_CMPLU_STALL_LOAD_FINISH",
101 "BriefDescription": "Completion stall due to a Load finish",
102 "PublicDescription": ""
103 },
104 {
105 "EventCode": "0x2c010",
106 "EventName": "PM_CMPLU_STALL_LSU",
107 "BriefDescription": "Completion stall by LSU instruction",
108 "PublicDescription": ""
109 },
110 {
111 "EventCode": "0x10036",
112 "EventName": "PM_CMPLU_STALL_LWSYNC",
113 "BriefDescription": "completion stall due to isync/lwsync",
114 "PublicDescription": ""
115 },
116 {
117 "EventCode": "0x30006",
118 "EventName": "PM_CMPLU_STALL_OTHER_CMPL",
119 "BriefDescription": "Instructions core completed while this tread was stalled",
120 "PublicDescription": "Instructions core completed while this thread was stalled"
121 },
122 {
123 "EventCode": "0x4c01c",
124 "EventName": "PM_CMPLU_STALL_ST_FWD",
125 "BriefDescription": "Completion stall due to store forward",
126 "PublicDescription": ""
127 },
128 {
129 "EventCode": "0x1001c",
130 "EventName": "PM_CMPLU_STALL_THRD",
131 "BriefDescription": "Completion Stalled due to thread conflict. Group ready to complete but it was another thread's turn",
132 "PublicDescription": "Completion stall due to thread conflict"
133 },
134 {
135 "EventCode": "0x1e",
136 "EventName": "PM_CYC",
137 "BriefDescription": "Cycles",
138 "PublicDescription": ""
139 },
140 {
141 "EventCode": "0x10006",
142 "EventName": "PM_DISP_HELD",
143 "BriefDescription": "Dispatch Held",
144 "PublicDescription": ""
145 },
146 {
147 "EventCode": "0x4003c",
148 "EventName": "PM_DISP_HELD_SYNC_HOLD",
149 "BriefDescription": "Dispatch held due to SYNC hold",
150 "PublicDescription": ""
151 },
152 {
153 "EventCode": "0x200f8",
154 "EventName": "PM_EXT_INT",
155 "BriefDescription": "external interrupt",
156 "PublicDescription": ""
157 },
158 {
159 "EventCode": "0x400f8",
160 "EventName": "PM_FLUSH",
161 "BriefDescription": "Flush (any type)",
162 "PublicDescription": ""
163 },
164 {
165 "EventCode": "0x30012",
166 "EventName": "PM_FLUSH_COMPLETION",
167 "BriefDescription": "Completion Flush",
168 "PublicDescription": ""
169 },
170 {
171 "EventCode": "0x3000c",
172 "EventName": "PM_FREQ_DOWN",
173 "BriefDescription": "Power Management: Below Threshold B",
174 "PublicDescription": "Frequency is being slewed down due to Power Management"
175 },
176 {
177 "EventCode": "0x4000c",
178 "EventName": "PM_FREQ_UP",
179 "BriefDescription": "Power Management: Above Threshold A",
180 "PublicDescription": "Frequency is being slewed up due to Power Management"
181 },
182 {
183 "EventCode": "0x2000a",
184 "EventName": "PM_HV_CYC",
185 "BriefDescription": "Cycles in which msr_hv is high. Note that this event does not take msr_pr into consideration",
186 "PublicDescription": "cycles in hypervisor mode"
187 },
188 {
189 "EventCode": "0x3405e",
190 "EventName": "PM_IFETCH_THROTTLE",
191 "BriefDescription": "Cycles in which Instruction fetch throttle was active",
192 "PublicDescription": "Cycles instruction fecth was throttled in IFU"
193 },
194 {
195 "EventCode": "0x10014",
196 "EventName": "PM_IOPS_CMPL",
197 "BriefDescription": "Internal Operations completed",
198 "PublicDescription": "IOPS Completed"
199 },
200 {
201 "EventCode": "0x3c058",
202 "EventName": "PM_LARX_FIN",
203 "BriefDescription": "Larx finished",
204 "PublicDescription": ""
205 },
206 {
207 "EventCode": "0x1002e",
208 "EventName": "PM_LD_CMPL",
209 "BriefDescription": "count of Loads completed",
210 "PublicDescription": ""
211 },
212 {
213 "EventCode": "0x10062",
214 "EventName": "PM_LD_L3MISS_PEND_CYC",
215 "BriefDescription": "Cycles L3 miss was pending for this thread",
216 "PublicDescription": ""
217 },
218 {
219 "EventCode": "0x30066",
220 "EventName": "PM_LSU_FIN",
221 "BriefDescription": "LSU Finished an instruction (up to 2 per cycle)",
222 "PublicDescription": ""
223 },
224 {
225 "EventCode": "0x2003e",
226 "EventName": "PM_LSU_LMQ_SRQ_EMPTY_CYC",
227 "BriefDescription": "LSU empty (lmq and srq empty)",
228 "PublicDescription": ""
229 },
230 {
231 "EventCode": "0x2e05c",
232 "EventName": "PM_LSU_REJECT_ERAT_MISS",
233 "BriefDescription": "LSU Reject due to ERAT (up to 4 per cycles)",
234 "PublicDescription": ""
235 },
236 {
237 "EventCode": "0x4e05c",
238 "EventName": "PM_LSU_REJECT_LHS",
239 "BriefDescription": "LSU Reject due to LHS (up to 4 per cycle)",
240 "PublicDescription": ""
241 },
242 {
243 "EventCode": "0x1e05c",
244 "EventName": "PM_LSU_REJECT_LMQ_FULL",
245 "BriefDescription": "LSU reject due to LMQ full ( 4 per cycle)",
246 "PublicDescription": ""
247 },
248 {
249 "EventCode": "0x1001a",
250 "EventName": "PM_LSU_SRQ_FULL_CYC",
251 "BriefDescription": "Storage Queue is full and is blocking dispatch",
252 "PublicDescription": "SRQ is Full"
253 },
254 {
255 "EventCode": "0x40014",
256 "EventName": "PM_PROBE_NOP_DISP",
257 "BriefDescription": "ProbeNops dispatched",
258 "PublicDescription": ""
259 },
260 {
261 "EventCode": "0x600f4",
262 "EventName": "PM_RUN_CYC",
263 "BriefDescription": "Run_cycles",
264 "PublicDescription": ""
265 },
266 {
267 "EventCode": "0x3006c",
268 "EventName": "PM_RUN_CYC_SMT2_MODE",
269 "BriefDescription": "Cycles run latch is set and core is in SMT2 mode",
270 "PublicDescription": ""
271 },
272 {
273 "EventCode": "0x2006c",
274 "EventName": "PM_RUN_CYC_SMT4_MODE",
275 "BriefDescription": "cycles this threads run latch is set and the core is in SMT4 mode",
276 "PublicDescription": "Cycles run latch is set and core is in SMT4 mode"
277 },
278 {
279 "EventCode": "0x1006c",
280 "EventName": "PM_RUN_CYC_ST_MODE",
281 "BriefDescription": "Cycles run latch is set and core is in ST mode",
282 "PublicDescription": ""
283 },
284 {
285 "EventCode": "0x500fa",
286 "EventName": "PM_RUN_INST_CMPL",
287 "BriefDescription": "Run_Instructions",
288 "PublicDescription": ""
289 },
290 {
291 "EventCode": "0x1e058",
292 "EventName": "PM_STCX_FAIL",
293 "BriefDescription": "stcx failed",
294 "PublicDescription": ""
295 },
296 {
297 "EventCode": "0x20016",
298 "EventName": "PM_ST_CMPL",
299 "BriefDescription": "Store completion count",
300 "PublicDescription": ""
301 },
302 {
303 "EventCode": "0x200f0",
304 "EventName": "PM_ST_FIN",
305 "BriefDescription": "Store Instructions Finished",
306 "PublicDescription": "Store Instructions Finished (store sent to nest)"
307 },
308 {
309 "EventCode": "0x20018",
310 "EventName": "PM_ST_FWD",
311 "BriefDescription": "Store forwards that finished",
312 "PublicDescription": ""
313 },
314 {
315 "EventCode": "0x10026",
316 "EventName": "PM_TABLEWALK_CYC",
317 "BriefDescription": "Cycles when a tablewalk (I or D) is active",
318 "PublicDescription": "Tablewalk Active"
319 },
320 {
321 "EventCode": "0x300f8",
322 "EventName": "PM_TB_BIT_TRANS",
323 "BriefDescription": "timebase event",
324 "PublicDescription": ""
325 },
326 {
327 "EventCode": "0x2000c",
328 "EventName": "PM_THRD_ALL_RUN_CYC",
329 "BriefDescription": "All Threads in Run_cycles (was both threads in run_cycles)",
330 "PublicDescription": ""
331 },
332 {
333 "EventCode": "0x30058",
334 "EventName": "PM_TLBIE_FIN",
335 "BriefDescription": "tlbie finished",
336 "PublicDescription": ""
337 },
338 {
339 "EventCode": "0x10060",
340 "EventName": "PM_TM_TRANS_RUN_CYC",
341 "BriefDescription": "run cycles in transactional state",
342 "PublicDescription": ""
343 },
344 {
345 "EventCode": "0x2e012",
346 "EventName": "PM_TM_TX_PASS_RUN_CYC",
347 "BriefDescription": "cycles spent in successful transactions",
348 "PublicDescription": "run cycles spent in successful transactions"
349 }
350 ]