arch/arm/mach-imx/ehci-imx31.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
   4  * Copyright (C) 2010 Freescale Semiconductor, Inc.
   5  */
   6
   7 #include <linux/platform_device.h>
   8 #include <linux/io.h>
   9 #include <linux/platform_data/usb-ehci-mxc.h>
  10
  11 #include "ehci.h"
  12 #include "hardware.h"
  13
  14 #define USBCTRL_OTGBASE_OFFSET  0x600
  15
  16 #define MX31_OTG_SIC_SHIFT      29
  17 #define MX31_OTG_SIC_MASK       (0x3 << MX31_OTG_SIC_SHIFT)
  18 #define MX31_OTG_PM_BIT         (1 << 24)
  19
  20 #define MX31_H2_SIC_SHIFT       21
  21 #define MX31_H2_SIC_MASK        (0x3 << MX31_H2_SIC_SHIFT)
  22 #define MX31_H2_PM_BIT          (1 << 16)
  23 #define MX31_H2_DT_BIT          (1 << 5)
  24
  25 #define MX31_H1_SIC_SHIFT       13
  26 #define MX31_H1_SIC_MASK        (0x3 << MX31_H1_SIC_SHIFT)
  27 #define MX31_H1_PM_BIT          (1 << 8)
  28 #define MX31_H1_DT_BIT          (1 << 4)
  29
  30 int mx31_initialize_usb_hw(int port, unsigned int flags)
  31 {
  32         unsigned int v;
  33
  34         v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
  35
  36         switch (port) {
  37         case 0: /* OTG port */
  38                 v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
  39                 v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
  40
  41                 if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
  42                         v |= MX31_OTG_PM_BIT;
  43
  44                 break;
  45         case 1: /* H1 port */
  46                 v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
  47                 v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
  48
  49                 if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
  50                         v |= MX31_H1_PM_BIT;
  51
  52                 if (!(flags & MXC_EHCI_TTL_ENABLED))
  53                         v |= MX31_H1_DT_BIT;
  54
  55                 break;
  56         case 2: /* H2 port */
  57                 v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
  58                 v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
  59
  60                 if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
  61                         v |= MX31_H2_PM_BIT;
  62
  63                 if (!(flags & MXC_EHCI_TTL_ENABLED))
  64                         v |= MX31_H2_DT_BIT;
  65
  66                 break;
  67         default:
  68                 return -EINVAL;
  69         }
  70
  71         writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
  72
  73         return 0;
  74 }