Linux 5.7.6
[linux/fpc-iii.git] / arch / arm / mach-integrator / integrator_cp.c
blobb7eb4038798b659c78447b85d7288eead368c1ea
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/arch/arm/mach-integrator/integrator_cp.c
5 * Copyright (C) 2003 Deep Blue Solutions Ltd
6 */
7 #include <linux/kernel.h>
8 #include <linux/amba/mmci.h>
9 #include <linux/io.h>
10 #include <linux/irqchip.h>
11 #include <linux/of_irq.h>
12 #include <linux/of_address.h>
13 #include <linux/of_platform.h>
14 #include <linux/sched_clock.h>
15 #include <linux/regmap.h>
16 #include <linux/mfd/syscon.h>
18 #include <asm/mach/arch.h>
19 #include <asm/mach/map.h>
21 #include "hardware.h"
22 #include "cm.h"
23 #include "common.h"
25 /* Base address to the core module header */
26 static struct regmap *cm_map;
27 /* Base address to the CP controller */
28 static void __iomem *intcp_con_base;
30 #define CM_COUNTER_OFFSET 0x28
33 * Logical Physical
34 * f1400000 14000000 Interrupt controller
35 * f1600000 16000000 UART 0
36 * fca00000 ca000000 SIC
39 static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
41 .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
42 .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
43 .length = SZ_4K,
44 .type = MT_DEVICE
45 }, {
46 .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
47 .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
48 .length = SZ_4K,
49 .type = MT_DEVICE
50 }, {
51 .virtual = IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
52 .pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
53 .length = SZ_4K,
54 .type = MT_DEVICE
58 static void __init intcp_map_io(void)
60 iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
64 * It seems that the card insertion interrupt remains active after
65 * we've acknowledged it. We therefore ignore the interrupt, and
66 * rely on reading it from the SIC. This also means that we must
67 * clear the latched interrupt.
69 static unsigned int mmc_status(struct device *dev)
71 unsigned int status = readl(__io_address(0xca000000 + 4));
72 writel(8, intcp_con_base + 8);
74 return status & 8;
77 static struct mmci_platform_data mmc_data = {
78 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
79 .status = mmc_status,
82 static u64 notrace intcp_read_sched_clock(void)
84 unsigned int val;
86 /* MMIO so discard return code */
87 regmap_read(cm_map, CM_COUNTER_OFFSET, &val);
88 return val;
91 static void __init intcp_init_early(void)
93 cm_map = syscon_regmap_lookup_by_compatible("arm,core-module-integrator");
94 if (IS_ERR(cm_map))
95 return;
96 sched_clock_register(intcp_read_sched_clock, 32, 24000000);
99 static void __init intcp_init_irq_of(void)
101 cm_init();
102 irqchip_init();
106 * For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA
107 * and enforce the bus names since these are used for clock lookups.
109 static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
110 OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
111 "mmci", &mmc_data),
112 { /* sentinel */ },
115 static const struct of_device_id intcp_syscon_match[] = {
116 { .compatible = "arm,integrator-cp-syscon"},
117 { },
120 static void __init intcp_init_of(void)
122 struct device_node *cpcon;
124 cpcon = of_find_matching_node(NULL, intcp_syscon_match);
125 if (!cpcon)
126 return;
128 intcp_con_base = of_iomap(cpcon, 0);
129 if (!intcp_con_base)
130 return;
132 of_platform_default_populate(NULL, intcp_auxdata_lookup, NULL);
135 static const char * intcp_dt_board_compat[] = {
136 "arm,integrator-cp",
137 NULL,
140 DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
141 .reserve = integrator_reserve,
142 .map_io = intcp_map_io,
143 .init_early = intcp_init_early,
144 .init_irq = intcp_init_irq_of,
145 .init_machine = intcp_init_of,
146 .dt_compat = intcp_dt_board_compat,
147 MACHINE_END