Linux 5.7.6
[linux/fpc-iii.git] / arch / arm / mach-mmp / pm-pxa910.c
blob69ebe18ff209fa39d72d06391ee56240ed320fad
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * PXA910 Power Management Routines
5 * (C) Copyright 2009 Marvell International Ltd.
6 * All Rights Reserved
7 */
9 #include <linux/kernel.h>
10 #include <linux/errno.h>
11 #include <linux/err.h>
12 #include <linux/time.h>
13 #include <linux/delay.h>
14 #include <linux/suspend.h>
15 #include <linux/interrupt.h>
16 #include <linux/io.h>
17 #include <linux/irq.h>
18 #include <asm/mach-types.h>
19 #include <asm/outercache.h>
21 #include <linux/soc/mmp/cputype.h>
22 #include "addr-map.h"
23 #include "pm-pxa910.h"
24 #include "regs-icu.h"
25 #include "irqs.h"
27 int pxa910_set_wake(struct irq_data *data, unsigned int on)
29 uint32_t awucrm = 0, apcr = 0;
30 int irq = data->irq;
32 /* setting wakeup sources */
33 switch (irq) {
34 /* wakeup line 2 */
35 case IRQ_PXA910_AP_GPIO:
36 awucrm = MPMU_AWUCRM_WAKEUP(2);
37 apcr |= MPMU_APCR_SLPWP2;
38 break;
39 /* wakeup line 3 */
40 case IRQ_PXA910_KEYPAD:
41 awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS;
42 apcr |= MPMU_APCR_SLPWP3;
43 break;
44 case IRQ_PXA910_ROTARY:
45 awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY;
46 apcr |= MPMU_APCR_SLPWP3;
47 break;
48 case IRQ_PXA910_TRACKBALL:
49 awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL;
50 apcr |= MPMU_APCR_SLPWP3;
51 break;
52 /* wakeup line 4 */
53 case IRQ_PXA910_AP1_TIMER1:
54 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1;
55 apcr |= MPMU_APCR_SLPWP4;
56 break;
57 case IRQ_PXA910_AP1_TIMER2:
58 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2;
59 apcr |= MPMU_APCR_SLPWP4;
60 break;
61 case IRQ_PXA910_AP1_TIMER3:
62 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3;
63 apcr |= MPMU_APCR_SLPWP4;
64 break;
65 case IRQ_PXA910_AP2_TIMER1:
66 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1;
67 apcr |= MPMU_APCR_SLPWP4;
68 break;
69 case IRQ_PXA910_AP2_TIMER2:
70 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2;
71 apcr |= MPMU_APCR_SLPWP4;
72 break;
73 case IRQ_PXA910_AP2_TIMER3:
74 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3;
75 apcr |= MPMU_APCR_SLPWP4;
76 break;
77 case IRQ_PXA910_RTC_ALARM:
78 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM;
79 apcr |= MPMU_APCR_SLPWP4;
80 break;
81 /* wakeup line 5 */
82 case IRQ_PXA910_USB1:
83 case IRQ_PXA910_USB2:
84 awucrm = MPMU_AWUCRM_WAKEUP(5);
85 apcr |= MPMU_APCR_SLPWP5;
86 break;
87 /* wakeup line 6 */
88 case IRQ_PXA910_MMC:
89 awucrm = MPMU_AWUCRM_WAKEUP(6)
90 | MPMU_AWUCRM_SDH1
91 | MPMU_AWUCRM_SDH2;
92 apcr |= MPMU_APCR_SLPWP6;
93 break;
94 /* wakeup line 7 */
95 case IRQ_PXA910_PMIC_INT:
96 awucrm = MPMU_AWUCRM_WAKEUP(7);
97 apcr |= MPMU_APCR_SLPWP7;
98 break;
99 default:
100 if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
101 awucrm = MPMU_AWUCRM_WAKEUP(2);
102 apcr |= MPMU_APCR_SLPWP2;
103 } else {
104 /* FIXME: This should return a proper error code ! */
105 printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
106 irq);
110 if (on) {
111 if (awucrm) {
112 awucrm |= __raw_readl(MPMU_AWUCRM);
113 __raw_writel(awucrm, MPMU_AWUCRM);
115 if (apcr) {
116 apcr = ~apcr & __raw_readl(MPMU_APCR);
117 __raw_writel(apcr, MPMU_APCR);
119 } else {
120 if (awucrm) {
121 awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM);
122 __raw_writel(awucrm, MPMU_AWUCRM);
124 if (apcr) {
125 apcr |= __raw_readl(MPMU_APCR);
126 __raw_writel(apcr, MPMU_APCR);
129 return 0;
132 void pxa910_pm_enter_lowpower_mode(int state)
134 uint32_t idle_cfg, apcr;
136 idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
137 apcr = __raw_readl(MPMU_APCR);
139 apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD
140 | MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN);
141 idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE
142 | APMU_MOH_IDLE_CFG_MOH_PWRDWN);
144 switch (state) {
145 case POWER_MODE_UDR:
146 /* only shutdown APB in UDR */
147 apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
148 /* fall through */
149 case POWER_MODE_SYS_SLEEP:
150 apcr |= MPMU_APCR_SLPEN; /* set the SLPEN bit */
151 apcr |= MPMU_APCR_VCTCXOSD; /* set VCTCXOSD */
152 /* fall through */
153 case POWER_MODE_APPS_SLEEP:
154 apcr |= MPMU_APCR_DDRCORSD; /* set DDRCORSD */
155 /* fall through */
156 case POWER_MODE_APPS_IDLE:
157 apcr |= MPMU_APCR_AXISD; /* set AXISDD bit */
158 /* fall through */
159 case POWER_MODE_CORE_EXTIDLE:
160 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
161 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
162 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
163 | APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
164 /* fall through */
165 case POWER_MODE_CORE_INTIDLE:
166 break;
169 /* program the memory controller hardware sleep type and auto wakeup */
170 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ;
171 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN;
172 __raw_writel(0x0, APMU_MC_HW_SLP_TYPE); /* auto refresh */
174 /* set DSPSD, DTCMSD, BBSD, MSASLPEN */
175 apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD
176 | MPMU_APCR_MSASLPEN;
178 /*always set SLEPEN bit mainly for MSA*/
179 apcr |= MPMU_APCR_SLPEN;
181 /* finally write the registers back */
182 __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
183 __raw_writel(apcr, MPMU_APCR);
187 static int pxa910_pm_enter(suspend_state_t state)
189 unsigned int idle_cfg, reg = 0;
191 /*pmic thread not completed,exit;otherwise system can't be waked up*/
192 reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT));
193 if ((reg & 0x3) == 0)
194 return -EAGAIN;
196 idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
197 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN
198 | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN;
199 __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
201 /* disable L2 */
202 outer_disable();
203 /* wait for l2 idle */
204 while (!(readl(CIU_REG(0x8)) & (1 << 16)))
205 udelay(1);
207 cpu_do_idle();
209 /* enable L2 */
210 outer_resume();
211 /* wait for l2 idle */
212 while (!(readl(CIU_REG(0x8)) & (1 << 16)))
213 udelay(1);
215 idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
216 idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN
217 | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN);
218 __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
220 return 0;
224 * Called after processes are frozen, but before we shut down devices.
226 static int pxa910_pm_prepare(void)
228 pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR);
229 return 0;
233 * Called after devices are re-setup, but before processes are thawed.
235 static void pxa910_pm_finish(void)
237 pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
240 static int pxa910_pm_valid(suspend_state_t state)
242 return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
245 static const struct platform_suspend_ops pxa910_pm_ops = {
246 .valid = pxa910_pm_valid,
247 .prepare = pxa910_pm_prepare,
248 .enter = pxa910_pm_enter,
249 .finish = pxa910_pm_finish,
252 static int __init pxa910_pm_init(void)
254 uint32_t awucrm = 0;
256 if (!cpu_is_pxa910())
257 return -EIO;
259 suspend_set_ops(&pxa910_pm_ops);
261 /* Set the following bits for MMP3 playback with VCTXO on */
262 __raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30),
263 APMU_SQU_CLK_GATE_CTRL);
264 __raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR);
266 awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE;
267 __raw_writel(awucrm, MPMU_AWUCRM);
269 return 0;
272 late_initcall(pxa910_pm_init);