Linux 5.7.6
[linux/fpc-iii.git] / arch / arm / mach-mvebu / pm.c
blobc487be61d6d8c9f00ceb6e131f9ab364d4e56fdd
1 /*
2 * Suspend/resume support. Currently supporting Armada XP only.
4 * Copyright (C) 2014 Marvell
6 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
13 #include <linux/cpu_pm.h>
14 #include <linux/delay.h>
15 #include <linux/gpio.h>
16 #include <linux/io.h>
17 #include <linux/kernel.h>
18 #include <linux/mbus.h>
19 #include <linux/of_address.h>
20 #include <linux/suspend.h>
21 #include <asm/cacheflush.h>
22 #include <asm/outercache.h>
23 #include <asm/suspend.h>
25 #include "coherency.h"
26 #include "common.h"
27 #include "pmsu.h"
29 #define SDRAM_CONFIG_OFFS 0x0
30 #define SDRAM_CONFIG_SR_MODE_BIT BIT(24)
31 #define SDRAM_OPERATION_OFFS 0x18
32 #define SDRAM_OPERATION_SELF_REFRESH 0x7
33 #define SDRAM_DLB_EVICTION_OFFS 0x30c
34 #define SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff
36 static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd);
37 static void __iomem *sdram_ctrl;
39 static int mvebu_pm_powerdown(unsigned long data)
41 u32 reg, srcmd;
43 flush_cache_all();
44 outer_flush_all();
47 * Issue a Data Synchronization Barrier instruction to ensure
48 * that all state saving has been completed.
50 dsb();
52 /* Flush the DLB and wait ~7 usec */
53 reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
54 reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK;
55 writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
57 udelay(7);
59 /* Set DRAM in battery backup mode */
60 reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS);
61 reg &= ~SDRAM_CONFIG_SR_MODE_BIT;
62 writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS);
64 /* Prepare to go to self-refresh */
66 srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS);
67 srcmd &= ~0x1F;
68 srcmd |= SDRAM_OPERATION_SELF_REFRESH;
70 mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd);
72 return 0;
75 #define BOOT_INFO_ADDR 0x3000
76 #define BOOT_MAGIC_WORD 0xdeadb002
77 #define BOOT_MAGIC_LIST_END 0xffffffff
80 * Those registers are accessed before switching the internal register
81 * base, which is why we hardcode the 0xd0000000 base address, the one
82 * used by the SoC out of reset.
84 #define MBUS_WINDOW_12_CTRL 0xd00200b0
85 #define MBUS_INTERNAL_REG_ADDRESS 0xd0020080
87 #define SDRAM_WIN_BASE_REG(x) (0x20180 + (0x8*x))
88 #define SDRAM_WIN_CTRL_REG(x) (0x20184 + (0x8*x))
90 static phys_addr_t mvebu_internal_reg_base(void)
92 struct device_node *np;
93 __be32 in_addr[2];
95 np = of_find_node_by_name(NULL, "internal-regs");
96 BUG_ON(!np);
99 * Ask the DT what is the internal register address on this
100 * platform. In the mvebu-mbus DT binding, 0xf0010000
101 * corresponds to the internal register window.
103 in_addr[0] = cpu_to_be32(0xf0010000);
104 in_addr[1] = 0x0;
106 return of_translate_address(np, in_addr);
109 static void mvebu_pm_store_armadaxp_bootinfo(u32 *store_addr)
111 phys_addr_t resume_pc;
113 resume_pc = __pa_symbol(armada_370_xp_cpu_resume);
116 * The bootloader expects the first two words to be a magic
117 * value (BOOT_MAGIC_WORD), followed by the address of the
118 * resume code to jump to. Then, it expects a sequence of
119 * (address, value) pairs, which can be used to restore the
120 * value of certain registers. This sequence must end with the
121 * BOOT_MAGIC_LIST_END magic value.
124 writel(BOOT_MAGIC_WORD, store_addr++);
125 writel(resume_pc, store_addr++);
128 * Some platforms remap their internal register base address
129 * to 0xf1000000. However, out of reset, window 12 starts at
130 * 0xf0000000 and ends at 0xf7ffffff, which would overlap with
131 * the internal registers. Therefore, disable window 12.
133 writel(MBUS_WINDOW_12_CTRL, store_addr++);
134 writel(0x0, store_addr++);
137 * Set the internal register base address to the value
138 * expected by Linux, as read from the Device Tree.
140 writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++);
141 writel(mvebu_internal_reg_base(), store_addr++);
144 * Ask the mvebu-mbus driver to store the SDRAM window
145 * configuration, which has to be restored by the bootloader
146 * before re-entering the kernel on resume.
148 store_addr += mvebu_mbus_save_cpu_target(store_addr);
150 writel(BOOT_MAGIC_LIST_END, store_addr);
153 static int mvebu_pm_store_bootinfo(void)
155 u32 *store_addr;
157 store_addr = phys_to_virt(BOOT_INFO_ADDR);
159 if (of_machine_is_compatible("marvell,armadaxp"))
160 mvebu_pm_store_armadaxp_bootinfo(store_addr);
161 else
162 return -ENODEV;
164 return 0;
167 static int mvebu_enter_suspend(void)
169 int ret;
171 ret = mvebu_pm_store_bootinfo();
172 if (ret)
173 return ret;
175 cpu_pm_enter();
177 cpu_suspend(0, mvebu_pm_powerdown);
179 outer_resume();
181 mvebu_v7_pmsu_idle_exit();
183 set_cpu_coherent();
185 cpu_pm_exit();
186 return 0;
189 static int mvebu_pm_enter(suspend_state_t state)
191 switch (state) {
192 case PM_SUSPEND_STANDBY:
193 cpu_do_idle();
194 break;
195 case PM_SUSPEND_MEM:
196 pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n");
197 return mvebu_enter_suspend();
198 default:
199 return -EINVAL;
201 return 0;
204 static int mvebu_pm_valid(suspend_state_t state)
206 if (state == PM_SUSPEND_STANDBY)
207 return 1;
209 if (state == PM_SUSPEND_MEM && mvebu_board_pm_enter != NULL)
210 return 1;
212 return 0;
215 static const struct platform_suspend_ops mvebu_pm_ops = {
216 .enter = mvebu_pm_enter,
217 .valid = mvebu_pm_valid,
220 static int __init mvebu_pm_init(void)
222 if (!of_machine_is_compatible("marvell,armadaxp") &&
223 !of_machine_is_compatible("marvell,armada370") &&
224 !of_machine_is_compatible("marvell,armada380") &&
225 !of_machine_is_compatible("marvell,armada390"))
226 return -ENODEV;
228 suspend_set_ops(&mvebu_pm_ops);
230 return 0;
234 late_initcall(mvebu_pm_init);
236 int __init mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg,
237 u32 srcmd))
239 struct device_node *np;
240 struct resource res;
242 np = of_find_compatible_node(NULL, NULL,
243 "marvell,armada-xp-sdram-controller");
244 if (!np)
245 return -ENODEV;
247 if (of_address_to_resource(np, 0, &res)) {
248 of_node_put(np);
249 return -ENODEV;
252 if (!request_mem_region(res.start, resource_size(&res),
253 np->full_name)) {
254 of_node_put(np);
255 return -EBUSY;
258 sdram_ctrl = ioremap(res.start, resource_size(&res));
259 if (!sdram_ctrl) {
260 release_mem_region(res.start, resource_size(&res));
261 of_node_put(np);
262 return -ENOMEM;
265 of_node_put(np);
267 mvebu_board_pm_enter = board_pm_enter;
269 return 0;