Linux 5.7.6
[linux/fpc-iii.git] / arch / arm / mm / cache-l2x0.c
blob12c26eb88afbca63868f7f3161653e4050cb4530
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * arch/arm/mm/cache-l2x0.c - L210/L220/L310 cache controller support
5 * Copyright (C) 2007 ARM Limited
6 */
7 #include <linux/cpu.h>
8 #include <linux/err.h>
9 #include <linux/init.h>
10 #include <linux/smp.h>
11 #include <linux/spinlock.h>
12 #include <linux/log2.h>
13 #include <linux/io.h>
14 #include <linux/of.h>
15 #include <linux/of_address.h>
17 #include <asm/cacheflush.h>
18 #include <asm/cp15.h>
19 #include <asm/cputype.h>
20 #include <asm/hardware/cache-l2x0.h>
21 #include <asm/hardware/cache-aurora-l2.h>
22 #include "cache-tauros3.h"
24 struct l2c_init_data {
25 const char *type;
26 unsigned way_size_0;
27 unsigned num_lock;
28 void (*of_parse)(const struct device_node *, u32 *, u32 *);
29 void (*enable)(void __iomem *, unsigned);
30 void (*fixup)(void __iomem *, u32, struct outer_cache_fns *);
31 void (*save)(void __iomem *);
32 void (*configure)(void __iomem *);
33 void (*unlock)(void __iomem *, unsigned);
34 struct outer_cache_fns outer_cache;
37 #define CACHE_LINE_SIZE 32
39 static void __iomem *l2x0_base;
40 static const struct l2c_init_data *l2x0_data;
41 static DEFINE_RAW_SPINLOCK(l2x0_lock);
42 static u32 l2x0_way_mask; /* Bitmask of active ways */
43 static u32 l2x0_size;
44 static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
46 struct l2x0_regs l2x0_saved_regs;
48 static bool l2x0_bresp_disable;
49 static bool l2x0_flz_disable;
52 * Common code for all cache controllers.
54 static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask)
56 /* wait for cache operation by line or way to complete */
57 while (readl_relaxed(reg) & mask)
58 cpu_relax();
62 * By default, we write directly to secure registers. Platforms must
63 * override this if they are running non-secure.
65 static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg)
67 if (val == readl_relaxed(base + reg))
68 return;
69 if (outer_cache.write_sec)
70 outer_cache.write_sec(val, reg);
71 else
72 writel_relaxed(val, base + reg);
76 * This should only be called when we have a requirement that the
77 * register be written due to a work-around, as platforms running
78 * in non-secure mode may not be able to access this register.
80 static inline void l2c_set_debug(void __iomem *base, unsigned long val)
82 l2c_write_sec(val, base, L2X0_DEBUG_CTRL);
85 static void __l2c_op_way(void __iomem *reg)
87 writel_relaxed(l2x0_way_mask, reg);
88 l2c_wait_mask(reg, l2x0_way_mask);
91 static inline void l2c_unlock(void __iomem *base, unsigned num)
93 unsigned i;
95 for (i = 0; i < num; i++) {
96 writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE +
97 i * L2X0_LOCKDOWN_STRIDE);
98 writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE +
99 i * L2X0_LOCKDOWN_STRIDE);
103 static void l2c_configure(void __iomem *base)
105 l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL);
109 * Enable the L2 cache controller. This function must only be
110 * called when the cache controller is known to be disabled.
112 static void l2c_enable(void __iomem *base, unsigned num_lock)
114 unsigned long flags;
116 if (outer_cache.configure)
117 outer_cache.configure(&l2x0_saved_regs);
118 else
119 l2x0_data->configure(base);
121 l2x0_data->unlock(base, num_lock);
123 local_irq_save(flags);
124 __l2c_op_way(base + L2X0_INV_WAY);
125 writel_relaxed(0, base + sync_reg_offset);
126 l2c_wait_mask(base + sync_reg_offset, 1);
127 local_irq_restore(flags);
129 l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL);
132 static void l2c_disable(void)
134 void __iomem *base = l2x0_base;
136 l2x0_pmu_suspend();
138 outer_cache.flush_all();
139 l2c_write_sec(0, base, L2X0_CTRL);
140 dsb(st);
143 static void l2c_save(void __iomem *base)
145 l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
148 static void l2c_resume(void)
150 void __iomem *base = l2x0_base;
152 /* Do not touch the controller if already enabled. */
153 if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN))
154 l2c_enable(base, l2x0_data->num_lock);
156 l2x0_pmu_resume();
160 * L2C-210 specific code.
162 * The L2C-2x0 PA, set/way and sync operations are atomic, but we must
163 * ensure that no background operation is running. The way operations
164 * are all background tasks.
166 * While a background operation is in progress, any new operation is
167 * ignored (unspecified whether this causes an error.) Thankfully, not
168 * used on SMP.
170 * Never has a different sync register other than L2X0_CACHE_SYNC, but
171 * we use sync_reg_offset here so we can share some of this with L2C-310.
173 static void __l2c210_cache_sync(void __iomem *base)
175 writel_relaxed(0, base + sync_reg_offset);
178 static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start,
179 unsigned long end)
181 while (start < end) {
182 writel_relaxed(start, reg);
183 start += CACHE_LINE_SIZE;
187 static void l2c210_inv_range(unsigned long start, unsigned long end)
189 void __iomem *base = l2x0_base;
191 if (start & (CACHE_LINE_SIZE - 1)) {
192 start &= ~(CACHE_LINE_SIZE - 1);
193 writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
194 start += CACHE_LINE_SIZE;
197 if (end & (CACHE_LINE_SIZE - 1)) {
198 end &= ~(CACHE_LINE_SIZE - 1);
199 writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
202 __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
203 __l2c210_cache_sync(base);
206 static void l2c210_clean_range(unsigned long start, unsigned long end)
208 void __iomem *base = l2x0_base;
210 start &= ~(CACHE_LINE_SIZE - 1);
211 __l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end);
212 __l2c210_cache_sync(base);
215 static void l2c210_flush_range(unsigned long start, unsigned long end)
217 void __iomem *base = l2x0_base;
219 start &= ~(CACHE_LINE_SIZE - 1);
220 __l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end);
221 __l2c210_cache_sync(base);
224 static void l2c210_flush_all(void)
226 void __iomem *base = l2x0_base;
228 BUG_ON(!irqs_disabled());
230 __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
231 __l2c210_cache_sync(base);
234 static void l2c210_sync(void)
236 __l2c210_cache_sync(l2x0_base);
239 static const struct l2c_init_data l2c210_data __initconst = {
240 .type = "L2C-210",
241 .way_size_0 = SZ_8K,
242 .num_lock = 1,
243 .enable = l2c_enable,
244 .save = l2c_save,
245 .configure = l2c_configure,
246 .unlock = l2c_unlock,
247 .outer_cache = {
248 .inv_range = l2c210_inv_range,
249 .clean_range = l2c210_clean_range,
250 .flush_range = l2c210_flush_range,
251 .flush_all = l2c210_flush_all,
252 .disable = l2c_disable,
253 .sync = l2c210_sync,
254 .resume = l2c_resume,
259 * L2C-220 specific code.
261 * All operations are background operations: they have to be waited for.
262 * Conflicting requests generate a slave error (which will cause an
263 * imprecise abort.) Never uses sync_reg_offset, so we hard-code the
264 * sync register here.
266 * However, we can re-use the l2c210_resume call.
268 static inline void __l2c220_cache_sync(void __iomem *base)
270 writel_relaxed(0, base + L2X0_CACHE_SYNC);
271 l2c_wait_mask(base + L2X0_CACHE_SYNC, 1);
274 static void l2c220_op_way(void __iomem *base, unsigned reg)
276 unsigned long flags;
278 raw_spin_lock_irqsave(&l2x0_lock, flags);
279 __l2c_op_way(base + reg);
280 __l2c220_cache_sync(base);
281 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
284 static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start,
285 unsigned long end, unsigned long flags)
287 raw_spinlock_t *lock = &l2x0_lock;
289 while (start < end) {
290 unsigned long blk_end = start + min(end - start, 4096UL);
292 while (start < blk_end) {
293 l2c_wait_mask(reg, 1);
294 writel_relaxed(start, reg);
295 start += CACHE_LINE_SIZE;
298 if (blk_end < end) {
299 raw_spin_unlock_irqrestore(lock, flags);
300 raw_spin_lock_irqsave(lock, flags);
304 return flags;
307 static void l2c220_inv_range(unsigned long start, unsigned long end)
309 void __iomem *base = l2x0_base;
310 unsigned long flags;
312 raw_spin_lock_irqsave(&l2x0_lock, flags);
313 if ((start | end) & (CACHE_LINE_SIZE - 1)) {
314 if (start & (CACHE_LINE_SIZE - 1)) {
315 start &= ~(CACHE_LINE_SIZE - 1);
316 writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
317 start += CACHE_LINE_SIZE;
320 if (end & (CACHE_LINE_SIZE - 1)) {
321 end &= ~(CACHE_LINE_SIZE - 1);
322 l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
323 writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
327 flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA,
328 start, end, flags);
329 l2c_wait_mask(base + L2X0_INV_LINE_PA, 1);
330 __l2c220_cache_sync(base);
331 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
334 static void l2c220_clean_range(unsigned long start, unsigned long end)
336 void __iomem *base = l2x0_base;
337 unsigned long flags;
339 start &= ~(CACHE_LINE_SIZE - 1);
340 if ((end - start) >= l2x0_size) {
341 l2c220_op_way(base, L2X0_CLEAN_WAY);
342 return;
345 raw_spin_lock_irqsave(&l2x0_lock, flags);
346 flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA,
347 start, end, flags);
348 l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
349 __l2c220_cache_sync(base);
350 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
353 static void l2c220_flush_range(unsigned long start, unsigned long end)
355 void __iomem *base = l2x0_base;
356 unsigned long flags;
358 start &= ~(CACHE_LINE_SIZE - 1);
359 if ((end - start) >= l2x0_size) {
360 l2c220_op_way(base, L2X0_CLEAN_INV_WAY);
361 return;
364 raw_spin_lock_irqsave(&l2x0_lock, flags);
365 flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA,
366 start, end, flags);
367 l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
368 __l2c220_cache_sync(base);
369 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
372 static void l2c220_flush_all(void)
374 l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY);
377 static void l2c220_sync(void)
379 unsigned long flags;
381 raw_spin_lock_irqsave(&l2x0_lock, flags);
382 __l2c220_cache_sync(l2x0_base);
383 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
386 static void l2c220_enable(void __iomem *base, unsigned num_lock)
389 * Always enable non-secure access to the lockdown registers -
390 * we write to them as part of the L2C enable sequence so they
391 * need to be accessible.
393 l2x0_saved_regs.aux_ctrl |= L220_AUX_CTRL_NS_LOCKDOWN;
395 l2c_enable(base, num_lock);
398 static void l2c220_unlock(void __iomem *base, unsigned num_lock)
400 if (readl_relaxed(base + L2X0_AUX_CTRL) & L220_AUX_CTRL_NS_LOCKDOWN)
401 l2c_unlock(base, num_lock);
404 static const struct l2c_init_data l2c220_data = {
405 .type = "L2C-220",
406 .way_size_0 = SZ_8K,
407 .num_lock = 1,
408 .enable = l2c220_enable,
409 .save = l2c_save,
410 .configure = l2c_configure,
411 .unlock = l2c220_unlock,
412 .outer_cache = {
413 .inv_range = l2c220_inv_range,
414 .clean_range = l2c220_clean_range,
415 .flush_range = l2c220_flush_range,
416 .flush_all = l2c220_flush_all,
417 .disable = l2c_disable,
418 .sync = l2c220_sync,
419 .resume = l2c_resume,
424 * L2C-310 specific code.
426 * Very similar to L2C-210, the PA, set/way and sync operations are atomic,
427 * and the way operations are all background tasks. However, issuing an
428 * operation while a background operation is in progress results in a
429 * SLVERR response. We can reuse:
431 * __l2c210_cache_sync (using sync_reg_offset)
432 * l2c210_sync
433 * l2c210_inv_range (if 588369 is not applicable)
434 * l2c210_clean_range
435 * l2c210_flush_range (if 588369 is not applicable)
436 * l2c210_flush_all (if 727915 is not applicable)
438 * Errata:
439 * 588369: PL310 R0P0->R1P0, fixed R2P0.
440 * Affects: all clean+invalidate operations
441 * clean and invalidate skips the invalidate step, so we need to issue
442 * separate operations. We also require the above debug workaround
443 * enclosing this code fragment on affected parts. On unaffected parts,
444 * we must not use this workaround without the debug register writes
445 * to avoid exposing a problem similar to 727915.
447 * 727915: PL310 R2P0->R3P0, fixed R3P1.
448 * Affects: clean+invalidate by way
449 * clean and invalidate by way runs in the background, and a store can
450 * hit the line between the clean operation and invalidate operation,
451 * resulting in the store being lost.
453 * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2.
454 * Affects: 8x64-bit (double fill) line fetches
455 * double fill line fetches can fail to cause dirty data to be evicted
456 * from the cache before the new data overwrites the second line.
458 * 753970: PL310 R3P0, fixed R3P1.
459 * Affects: sync
460 * prevents merging writes after the sync operation, until another L2C
461 * operation is performed (or a number of other conditions.)
463 * 769419: PL310 R0P0->R3P1, fixed R3P2.
464 * Affects: store buffer
465 * store buffer is not automatically drained.
467 static void l2c310_inv_range_erratum(unsigned long start, unsigned long end)
469 void __iomem *base = l2x0_base;
471 if ((start | end) & (CACHE_LINE_SIZE - 1)) {
472 unsigned long flags;
474 /* Erratum 588369 for both clean+invalidate operations */
475 raw_spin_lock_irqsave(&l2x0_lock, flags);
476 l2c_set_debug(base, 0x03);
478 if (start & (CACHE_LINE_SIZE - 1)) {
479 start &= ~(CACHE_LINE_SIZE - 1);
480 writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
481 writel_relaxed(start, base + L2X0_INV_LINE_PA);
482 start += CACHE_LINE_SIZE;
485 if (end & (CACHE_LINE_SIZE - 1)) {
486 end &= ~(CACHE_LINE_SIZE - 1);
487 writel_relaxed(end, base + L2X0_CLEAN_LINE_PA);
488 writel_relaxed(end, base + L2X0_INV_LINE_PA);
491 l2c_set_debug(base, 0x00);
492 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
495 __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
496 __l2c210_cache_sync(base);
499 static void l2c310_flush_range_erratum(unsigned long start, unsigned long end)
501 raw_spinlock_t *lock = &l2x0_lock;
502 unsigned long flags;
503 void __iomem *base = l2x0_base;
505 raw_spin_lock_irqsave(lock, flags);
506 while (start < end) {
507 unsigned long blk_end = start + min(end - start, 4096UL);
509 l2c_set_debug(base, 0x03);
510 while (start < blk_end) {
511 writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
512 writel_relaxed(start, base + L2X0_INV_LINE_PA);
513 start += CACHE_LINE_SIZE;
515 l2c_set_debug(base, 0x00);
517 if (blk_end < end) {
518 raw_spin_unlock_irqrestore(lock, flags);
519 raw_spin_lock_irqsave(lock, flags);
522 raw_spin_unlock_irqrestore(lock, flags);
523 __l2c210_cache_sync(base);
526 static void l2c310_flush_all_erratum(void)
528 void __iomem *base = l2x0_base;
529 unsigned long flags;
531 raw_spin_lock_irqsave(&l2x0_lock, flags);
532 l2c_set_debug(base, 0x03);
533 __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
534 l2c_set_debug(base, 0x00);
535 __l2c210_cache_sync(base);
536 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
539 static void __init l2c310_save(void __iomem *base)
541 unsigned revision;
543 l2c_save(base);
545 l2x0_saved_regs.tag_latency = readl_relaxed(base +
546 L310_TAG_LATENCY_CTRL);
547 l2x0_saved_regs.data_latency = readl_relaxed(base +
548 L310_DATA_LATENCY_CTRL);
549 l2x0_saved_regs.filter_end = readl_relaxed(base +
550 L310_ADDR_FILTER_END);
551 l2x0_saved_regs.filter_start = readl_relaxed(base +
552 L310_ADDR_FILTER_START);
554 revision = readl_relaxed(base + L2X0_CACHE_ID) &
555 L2X0_CACHE_ID_RTL_MASK;
557 /* From r2p0, there is Prefetch offset/control register */
558 if (revision >= L310_CACHE_ID_RTL_R2P0)
559 l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base +
560 L310_PREFETCH_CTRL);
562 /* From r3p0, there is Power control register */
563 if (revision >= L310_CACHE_ID_RTL_R3P0)
564 l2x0_saved_regs.pwr_ctrl = readl_relaxed(base +
565 L310_POWER_CTRL);
568 static void l2c310_configure(void __iomem *base)
570 unsigned revision;
572 l2c_configure(base);
574 /* restore pl310 setup */
575 l2c_write_sec(l2x0_saved_regs.tag_latency, base,
576 L310_TAG_LATENCY_CTRL);
577 l2c_write_sec(l2x0_saved_regs.data_latency, base,
578 L310_DATA_LATENCY_CTRL);
579 l2c_write_sec(l2x0_saved_regs.filter_end, base,
580 L310_ADDR_FILTER_END);
581 l2c_write_sec(l2x0_saved_regs.filter_start, base,
582 L310_ADDR_FILTER_START);
584 revision = readl_relaxed(base + L2X0_CACHE_ID) &
585 L2X0_CACHE_ID_RTL_MASK;
587 if (revision >= L310_CACHE_ID_RTL_R2P0)
588 l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base,
589 L310_PREFETCH_CTRL);
590 if (revision >= L310_CACHE_ID_RTL_R3P0)
591 l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base,
592 L310_POWER_CTRL);
595 static int l2c310_starting_cpu(unsigned int cpu)
597 set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
598 return 0;
601 static int l2c310_dying_cpu(unsigned int cpu)
603 set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
604 return 0;
607 static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
609 unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
610 bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9;
611 u32 aux = l2x0_saved_regs.aux_ctrl;
613 if (rev >= L310_CACHE_ID_RTL_R2P0) {
614 if (cortex_a9 && !l2x0_bresp_disable) {
615 aux |= L310_AUX_CTRL_EARLY_BRESP;
616 pr_info("L2C-310 enabling early BRESP for Cortex-A9\n");
617 } else if (aux & L310_AUX_CTRL_EARLY_BRESP) {
618 pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n");
619 aux &= ~L310_AUX_CTRL_EARLY_BRESP;
623 if (cortex_a9 && !l2x0_flz_disable) {
624 u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL);
625 u32 acr = get_auxcr();
627 pr_debug("Cortex-A9 ACR=0x%08x\n", acr);
629 if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO))
630 pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n");
632 if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3)))
633 pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n");
635 if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) {
636 aux |= L310_AUX_CTRL_FULL_LINE_ZERO;
637 pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n");
639 } else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) {
640 pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n");
641 aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP);
645 * Always enable non-secure access to the lockdown registers -
646 * we write to them as part of the L2C enable sequence so they
647 * need to be accessible.
649 l2x0_saved_regs.aux_ctrl = aux | L310_AUX_CTRL_NS_LOCKDOWN;
651 l2c_enable(base, num_lock);
653 /* Read back resulting AUX_CTRL value as it could have been altered. */
654 aux = readl_relaxed(base + L2X0_AUX_CTRL);
656 if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) {
657 u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL);
659 pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n",
660 aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "",
661 aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "",
662 1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK));
665 /* r3p0 or later has power control register */
666 if (rev >= L310_CACHE_ID_RTL_R3P0) {
667 u32 power_ctrl;
669 power_ctrl = readl_relaxed(base + L310_POWER_CTRL);
670 pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n",
671 power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis",
672 power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis");
675 if (aux & L310_AUX_CTRL_FULL_LINE_ZERO)
676 cpuhp_setup_state(CPUHP_AP_ARM_L2X0_STARTING,
677 "arm/l2x0:starting", l2c310_starting_cpu,
678 l2c310_dying_cpu);
681 static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
682 struct outer_cache_fns *fns)
684 unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK;
685 const char *errata[8];
686 unsigned n = 0;
688 if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) &&
689 revision < L310_CACHE_ID_RTL_R2P0 &&
690 /* For bcm compatibility */
691 fns->inv_range == l2c210_inv_range) {
692 fns->inv_range = l2c310_inv_range_erratum;
693 fns->flush_range = l2c310_flush_range_erratum;
694 errata[n++] = "588369";
697 if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) &&
698 revision >= L310_CACHE_ID_RTL_R2P0 &&
699 revision < L310_CACHE_ID_RTL_R3P1) {
700 fns->flush_all = l2c310_flush_all_erratum;
701 errata[n++] = "727915";
704 if (revision >= L310_CACHE_ID_RTL_R3P0 &&
705 revision < L310_CACHE_ID_RTL_R3P2) {
706 u32 val = l2x0_saved_regs.prefetch_ctrl;
707 if (val & L310_PREFETCH_CTRL_DBL_LINEFILL) {
708 val &= ~L310_PREFETCH_CTRL_DBL_LINEFILL;
709 l2x0_saved_regs.prefetch_ctrl = val;
710 errata[n++] = "752271";
714 if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) &&
715 revision == L310_CACHE_ID_RTL_R3P0) {
716 sync_reg_offset = L2X0_DUMMY_REG;
717 errata[n++] = "753970";
720 if (IS_ENABLED(CONFIG_PL310_ERRATA_769419))
721 errata[n++] = "769419";
723 if (n) {
724 unsigned i;
726 pr_info("L2C-310 errat%s", n > 1 ? "a" : "um");
727 for (i = 0; i < n; i++)
728 pr_cont(" %s", errata[i]);
729 pr_cont(" enabled\n");
733 static void l2c310_disable(void)
736 * If full-line-of-zeros is enabled, we must first disable it in the
737 * Cortex-A9 auxiliary control register before disabling the L2 cache.
739 if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
740 set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
742 l2c_disable();
745 static void l2c310_resume(void)
747 l2c_resume();
749 /* Re-enable full-line-of-zeros for Cortex-A9 */
750 if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
751 set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
754 static void l2c310_unlock(void __iomem *base, unsigned num_lock)
756 if (readl_relaxed(base + L2X0_AUX_CTRL) & L310_AUX_CTRL_NS_LOCKDOWN)
757 l2c_unlock(base, num_lock);
760 static const struct l2c_init_data l2c310_init_fns __initconst = {
761 .type = "L2C-310",
762 .way_size_0 = SZ_8K,
763 .num_lock = 8,
764 .enable = l2c310_enable,
765 .fixup = l2c310_fixup,
766 .save = l2c310_save,
767 .configure = l2c310_configure,
768 .unlock = l2c310_unlock,
769 .outer_cache = {
770 .inv_range = l2c210_inv_range,
771 .clean_range = l2c210_clean_range,
772 .flush_range = l2c210_flush_range,
773 .flush_all = l2c210_flush_all,
774 .disable = l2c310_disable,
775 .sync = l2c210_sync,
776 .resume = l2c310_resume,
780 static int __init __l2c_init(const struct l2c_init_data *data,
781 u32 aux_val, u32 aux_mask, u32 cache_id, bool nosync)
783 struct outer_cache_fns fns;
784 unsigned way_size_bits, ways;
785 u32 aux, old_aux;
788 * Save the pointer globally so that callbacks which do not receive
789 * context from callers can access the structure.
791 l2x0_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
792 if (!l2x0_data)
793 return -ENOMEM;
796 * Sanity check the aux values. aux_mask is the bits we preserve
797 * from reading the hardware register, and aux_val is the bits we
798 * set.
800 if (aux_val & aux_mask)
801 pr_alert("L2C: platform provided aux values permit register corruption.\n");
803 old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
804 aux &= aux_mask;
805 aux |= aux_val;
807 if (old_aux != aux)
808 pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n",
809 old_aux, aux);
811 /* Determine the number of ways */
812 switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
813 case L2X0_CACHE_ID_PART_L310:
814 if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16))
815 pr_warn("L2C: DT/platform tries to modify or specify cache size\n");
816 if (aux & (1 << 16))
817 ways = 16;
818 else
819 ways = 8;
820 break;
822 case L2X0_CACHE_ID_PART_L210:
823 case L2X0_CACHE_ID_PART_L220:
824 ways = (aux >> 13) & 0xf;
825 break;
827 case AURORA_CACHE_ID:
828 ways = (aux >> 13) & 0xf;
829 ways = 2 << ((ways + 1) >> 2);
830 break;
832 default:
833 /* Assume unknown chips have 8 ways */
834 ways = 8;
835 break;
838 l2x0_way_mask = (1 << ways) - 1;
841 * way_size_0 is the size that a way_size value of zero would be
842 * given the calculation: way_size = way_size_0 << way_size_bits.
843 * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k,
844 * then way_size_0 would be 8k.
846 * L2 cache size = number of ways * way size.
848 way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >>
849 L2C_AUX_CTRL_WAY_SIZE_SHIFT;
850 l2x0_size = ways * (data->way_size_0 << way_size_bits);
852 fns = data->outer_cache;
853 fns.write_sec = outer_cache.write_sec;
854 fns.configure = outer_cache.configure;
855 if (data->fixup)
856 data->fixup(l2x0_base, cache_id, &fns);
857 if (nosync) {
858 pr_info("L2C: disabling outer sync\n");
859 fns.sync = NULL;
863 * Check if l2x0 controller is already enabled. If we are booting
864 * in non-secure mode accessing the below registers will fault.
866 if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
867 l2x0_saved_regs.aux_ctrl = aux;
869 data->enable(l2x0_base, data->num_lock);
872 outer_cache = fns;
875 * It is strange to save the register state before initialisation,
876 * but hey, this is what the DT implementations decided to do.
878 if (data->save)
879 data->save(l2x0_base);
881 /* Re-read it in case some bits are reserved. */
882 aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
884 pr_info("%s cache controller enabled, %d ways, %d kB\n",
885 data->type, ways, l2x0_size >> 10);
886 pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
887 data->type, cache_id, aux);
889 l2x0_pmu_register(l2x0_base, cache_id);
891 return 0;
894 void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
896 const struct l2c_init_data *data;
897 u32 cache_id;
899 l2x0_base = base;
901 cache_id = readl_relaxed(base + L2X0_CACHE_ID);
903 switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
904 default:
905 case L2X0_CACHE_ID_PART_L210:
906 data = &l2c210_data;
907 break;
909 case L2X0_CACHE_ID_PART_L220:
910 data = &l2c220_data;
911 break;
913 case L2X0_CACHE_ID_PART_L310:
914 data = &l2c310_init_fns;
915 break;
918 /* Read back current (default) hardware configuration */
919 if (data->save)
920 data->save(l2x0_base);
922 __l2c_init(data, aux_val, aux_mask, cache_id, false);
925 #ifdef CONFIG_OF
926 static int l2_wt_override;
928 /* Aurora don't have the cache ID register available, so we have to
929 * pass it though the device tree */
930 static u32 cache_id_part_number_from_dt;
933 * l2x0_cache_size_of_parse() - read cache size parameters from DT
934 * @np: the device tree node for the l2 cache
935 * @aux_val: pointer to machine-supplied auxilary register value, to
936 * be augmented by the call (bits to be set to 1)
937 * @aux_mask: pointer to machine-supplied auxilary register mask, to
938 * be augmented by the call (bits to be set to 0)
939 * @associativity: variable to return the calculated associativity in
940 * @max_way_size: the maximum size in bytes for the cache ways
942 static int __init l2x0_cache_size_of_parse(const struct device_node *np,
943 u32 *aux_val, u32 *aux_mask,
944 u32 *associativity,
945 u32 max_way_size)
947 u32 mask = 0, val = 0;
948 u32 cache_size = 0, sets = 0;
949 u32 way_size_bits = 1;
950 u32 way_size = 0;
951 u32 block_size = 0;
952 u32 line_size = 0;
954 of_property_read_u32(np, "cache-size", &cache_size);
955 of_property_read_u32(np, "cache-sets", &sets);
956 of_property_read_u32(np, "cache-block-size", &block_size);
957 of_property_read_u32(np, "cache-line-size", &line_size);
959 if (!cache_size || !sets)
960 return -ENODEV;
962 /* All these l2 caches have the same line = block size actually */
963 if (!line_size) {
964 if (block_size) {
965 /* If linesize is not given, it is equal to blocksize */
966 line_size = block_size;
967 } else {
968 /* Fall back to known size */
969 pr_warn("L2C OF: no cache block/line size given: "
970 "falling back to default size %d bytes\n",
971 CACHE_LINE_SIZE);
972 line_size = CACHE_LINE_SIZE;
976 if (line_size != CACHE_LINE_SIZE)
977 pr_warn("L2C OF: DT supplied line size %d bytes does "
978 "not match hardware line size of %d bytes\n",
979 line_size,
980 CACHE_LINE_SIZE);
983 * Since:
984 * set size = cache size / sets
985 * ways = cache size / (sets * line size)
986 * way size = cache size / (cache size / (sets * line size))
987 * way size = sets * line size
988 * associativity = ways = cache size / way size
990 way_size = sets * line_size;
991 *associativity = cache_size / way_size;
993 if (way_size > max_way_size) {
994 pr_err("L2C OF: set size %dKB is too large\n", way_size);
995 return -EINVAL;
998 pr_info("L2C OF: override cache size: %d bytes (%dKB)\n",
999 cache_size, cache_size >> 10);
1000 pr_info("L2C OF: override line size: %d bytes\n", line_size);
1001 pr_info("L2C OF: override way size: %d bytes (%dKB)\n",
1002 way_size, way_size >> 10);
1003 pr_info("L2C OF: override associativity: %d\n", *associativity);
1006 * Calculates the bits 17:19 to set for way size:
1007 * 512KB -> 6, 256KB -> 5, ... 16KB -> 1
1009 way_size_bits = ilog2(way_size >> 10) - 3;
1010 if (way_size_bits < 1 || way_size_bits > 6) {
1011 pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n",
1012 way_size);
1013 return -EINVAL;
1016 mask |= L2C_AUX_CTRL_WAY_SIZE_MASK;
1017 val |= (way_size_bits << L2C_AUX_CTRL_WAY_SIZE_SHIFT);
1019 *aux_val &= ~mask;
1020 *aux_val |= val;
1021 *aux_mask &= ~mask;
1023 return 0;
1026 static void __init l2x0_of_parse(const struct device_node *np,
1027 u32 *aux_val, u32 *aux_mask)
1029 u32 data[2] = { 0, 0 };
1030 u32 tag = 0;
1031 u32 dirty = 0;
1032 u32 val = 0, mask = 0;
1033 u32 assoc;
1034 int ret;
1036 of_property_read_u32(np, "arm,tag-latency", &tag);
1037 if (tag) {
1038 mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
1039 val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
1042 of_property_read_u32_array(np, "arm,data-latency",
1043 data, ARRAY_SIZE(data));
1044 if (data[0] && data[1]) {
1045 mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
1046 L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
1047 val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
1048 ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
1051 of_property_read_u32(np, "arm,dirty-latency", &dirty);
1052 if (dirty) {
1053 mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
1054 val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
1057 if (of_property_read_bool(np, "arm,parity-enable")) {
1058 mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
1059 val |= L2C_AUX_CTRL_PARITY_ENABLE;
1060 } else if (of_property_read_bool(np, "arm,parity-disable")) {
1061 mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
1064 if (of_property_read_bool(np, "arm,shared-override")) {
1065 mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
1066 val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
1069 ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
1070 if (ret)
1071 return;
1073 if (assoc > 8) {
1074 pr_err("l2x0 of: cache setting yield too high associativity\n");
1075 pr_err("l2x0 of: %d calculated, max 8\n", assoc);
1076 } else {
1077 mask |= L2X0_AUX_CTRL_ASSOC_MASK;
1078 val |= (assoc << L2X0_AUX_CTRL_ASSOC_SHIFT);
1081 *aux_val &= ~mask;
1082 *aux_val |= val;
1083 *aux_mask &= ~mask;
1086 static const struct l2c_init_data of_l2c210_data __initconst = {
1087 .type = "L2C-210",
1088 .way_size_0 = SZ_8K,
1089 .num_lock = 1,
1090 .of_parse = l2x0_of_parse,
1091 .enable = l2c_enable,
1092 .save = l2c_save,
1093 .configure = l2c_configure,
1094 .unlock = l2c_unlock,
1095 .outer_cache = {
1096 .inv_range = l2c210_inv_range,
1097 .clean_range = l2c210_clean_range,
1098 .flush_range = l2c210_flush_range,
1099 .flush_all = l2c210_flush_all,
1100 .disable = l2c_disable,
1101 .sync = l2c210_sync,
1102 .resume = l2c_resume,
1106 static const struct l2c_init_data of_l2c220_data __initconst = {
1107 .type = "L2C-220",
1108 .way_size_0 = SZ_8K,
1109 .num_lock = 1,
1110 .of_parse = l2x0_of_parse,
1111 .enable = l2c220_enable,
1112 .save = l2c_save,
1113 .configure = l2c_configure,
1114 .unlock = l2c220_unlock,
1115 .outer_cache = {
1116 .inv_range = l2c220_inv_range,
1117 .clean_range = l2c220_clean_range,
1118 .flush_range = l2c220_flush_range,
1119 .flush_all = l2c220_flush_all,
1120 .disable = l2c_disable,
1121 .sync = l2c220_sync,
1122 .resume = l2c_resume,
1126 static void __init l2c310_of_parse(const struct device_node *np,
1127 u32 *aux_val, u32 *aux_mask)
1129 u32 data[3] = { 0, 0, 0 };
1130 u32 tag[3] = { 0, 0, 0 };
1131 u32 filter[2] = { 0, 0 };
1132 u32 assoc;
1133 u32 prefetch;
1134 u32 power;
1135 u32 val;
1136 int ret;
1138 of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
1139 if (tag[0] && tag[1] && tag[2])
1140 l2x0_saved_regs.tag_latency =
1141 L310_LATENCY_CTRL_RD(tag[0] - 1) |
1142 L310_LATENCY_CTRL_WR(tag[1] - 1) |
1143 L310_LATENCY_CTRL_SETUP(tag[2] - 1);
1145 of_property_read_u32_array(np, "arm,data-latency",
1146 data, ARRAY_SIZE(data));
1147 if (data[0] && data[1] && data[2])
1148 l2x0_saved_regs.data_latency =
1149 L310_LATENCY_CTRL_RD(data[0] - 1) |
1150 L310_LATENCY_CTRL_WR(data[1] - 1) |
1151 L310_LATENCY_CTRL_SETUP(data[2] - 1);
1153 of_property_read_u32_array(np, "arm,filter-ranges",
1154 filter, ARRAY_SIZE(filter));
1155 if (filter[1]) {
1156 l2x0_saved_regs.filter_end =
1157 ALIGN(filter[0] + filter[1], SZ_1M);
1158 l2x0_saved_regs.filter_start = (filter[0] & ~(SZ_1M - 1))
1159 | L310_ADDR_FILTER_EN;
1162 ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
1163 if (!ret) {
1164 switch (assoc) {
1165 case 16:
1166 *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
1167 *aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16;
1168 *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
1169 break;
1170 case 8:
1171 *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
1172 *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
1173 break;
1174 default:
1175 pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n",
1176 assoc);
1177 break;
1181 if (of_property_read_bool(np, "arm,shared-override")) {
1182 *aux_val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
1183 *aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
1186 if (of_property_read_bool(np, "arm,parity-enable")) {
1187 *aux_val |= L2C_AUX_CTRL_PARITY_ENABLE;
1188 *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
1189 } else if (of_property_read_bool(np, "arm,parity-disable")) {
1190 *aux_val &= ~L2C_AUX_CTRL_PARITY_ENABLE;
1191 *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
1194 if (of_property_read_bool(np, "arm,early-bresp-disable"))
1195 l2x0_bresp_disable = true;
1197 if (of_property_read_bool(np, "arm,full-line-zero-disable"))
1198 l2x0_flz_disable = true;
1200 prefetch = l2x0_saved_regs.prefetch_ctrl;
1202 ret = of_property_read_u32(np, "arm,double-linefill", &val);
1203 if (ret == 0) {
1204 if (val)
1205 prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL;
1206 else
1207 prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL;
1208 } else if (ret != -EINVAL) {
1209 pr_err("L2C-310 OF arm,double-linefill property value is missing\n");
1212 ret = of_property_read_u32(np, "arm,double-linefill-incr", &val);
1213 if (ret == 0) {
1214 if (val)
1215 prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_INCR;
1216 else
1217 prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_INCR;
1218 } else if (ret != -EINVAL) {
1219 pr_err("L2C-310 OF arm,double-linefill-incr property value is missing\n");
1222 ret = of_property_read_u32(np, "arm,double-linefill-wrap", &val);
1223 if (ret == 0) {
1224 if (!val)
1225 prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP;
1226 else
1227 prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP;
1228 } else if (ret != -EINVAL) {
1229 pr_err("L2C-310 OF arm,double-linefill-wrap property value is missing\n");
1232 ret = of_property_read_u32(np, "arm,prefetch-drop", &val);
1233 if (ret == 0) {
1234 if (val)
1235 prefetch |= L310_PREFETCH_CTRL_PREFETCH_DROP;
1236 else
1237 prefetch &= ~L310_PREFETCH_CTRL_PREFETCH_DROP;
1238 } else if (ret != -EINVAL) {
1239 pr_err("L2C-310 OF arm,prefetch-drop property value is missing\n");
1242 ret = of_property_read_u32(np, "arm,prefetch-offset", &val);
1243 if (ret == 0) {
1244 prefetch &= ~L310_PREFETCH_CTRL_OFFSET_MASK;
1245 prefetch |= val & L310_PREFETCH_CTRL_OFFSET_MASK;
1246 } else if (ret != -EINVAL) {
1247 pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n");
1250 ret = of_property_read_u32(np, "prefetch-data", &val);
1251 if (ret == 0) {
1252 if (val)
1253 prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
1254 else
1255 prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
1256 } else if (ret != -EINVAL) {
1257 pr_err("L2C-310 OF prefetch-data property value is missing\n");
1260 ret = of_property_read_u32(np, "prefetch-instr", &val);
1261 if (ret == 0) {
1262 if (val)
1263 prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
1264 else
1265 prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
1266 } else if (ret != -EINVAL) {
1267 pr_err("L2C-310 OF prefetch-instr property value is missing\n");
1270 l2x0_saved_regs.prefetch_ctrl = prefetch;
1272 power = l2x0_saved_regs.pwr_ctrl |
1273 L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN;
1275 ret = of_property_read_u32(np, "arm,dynamic-clock-gating", &val);
1276 if (!ret) {
1277 if (!val)
1278 power &= ~L310_DYNAMIC_CLK_GATING_EN;
1279 } else if (ret != -EINVAL) {
1280 pr_err("L2C-310 OF dynamic-clock-gating property value is missing or invalid\n");
1282 ret = of_property_read_u32(np, "arm,standby-mode", &val);
1283 if (!ret) {
1284 if (!val)
1285 power &= ~L310_STNDBY_MODE_EN;
1286 } else if (ret != -EINVAL) {
1287 pr_err("L2C-310 OF standby-mode property value is missing or invalid\n");
1290 l2x0_saved_regs.pwr_ctrl = power;
1293 static const struct l2c_init_data of_l2c310_data __initconst = {
1294 .type = "L2C-310",
1295 .way_size_0 = SZ_8K,
1296 .num_lock = 8,
1297 .of_parse = l2c310_of_parse,
1298 .enable = l2c310_enable,
1299 .fixup = l2c310_fixup,
1300 .save = l2c310_save,
1301 .configure = l2c310_configure,
1302 .unlock = l2c310_unlock,
1303 .outer_cache = {
1304 .inv_range = l2c210_inv_range,
1305 .clean_range = l2c210_clean_range,
1306 .flush_range = l2c210_flush_range,
1307 .flush_all = l2c210_flush_all,
1308 .disable = l2c310_disable,
1309 .sync = l2c210_sync,
1310 .resume = l2c310_resume,
1315 * This is a variant of the of_l2c310_data with .sync set to
1316 * NULL. Outer sync operations are not needed when the system is I/O
1317 * coherent, and potentially harmful in certain situations (PCIe/PL310
1318 * deadlock on Armada 375/38x due to hardware I/O coherency). The
1319 * other operations are kept because they are infrequent (therefore do
1320 * not cause the deadlock in practice) and needed for secondary CPU
1321 * boot and other power management activities.
1323 static const struct l2c_init_data of_l2c310_coherent_data __initconst = {
1324 .type = "L2C-310 Coherent",
1325 .way_size_0 = SZ_8K,
1326 .num_lock = 8,
1327 .of_parse = l2c310_of_parse,
1328 .enable = l2c310_enable,
1329 .fixup = l2c310_fixup,
1330 .save = l2c310_save,
1331 .configure = l2c310_configure,
1332 .unlock = l2c310_unlock,
1333 .outer_cache = {
1334 .inv_range = l2c210_inv_range,
1335 .clean_range = l2c210_clean_range,
1336 .flush_range = l2c210_flush_range,
1337 .flush_all = l2c210_flush_all,
1338 .disable = l2c310_disable,
1339 .resume = l2c310_resume,
1344 * Note that the end addresses passed to Linux primitives are
1345 * noninclusive, while the hardware cache range operations use
1346 * inclusive start and end addresses.
1348 static unsigned long aurora_range_end(unsigned long start, unsigned long end)
1351 * Limit the number of cache lines processed at once,
1352 * since cache range operations stall the CPU pipeline
1353 * until completion.
1355 if (end > start + AURORA_MAX_RANGE_SIZE)
1356 end = start + AURORA_MAX_RANGE_SIZE;
1359 * Cache range operations can't straddle a page boundary.
1361 if (end > PAGE_ALIGN(start+1))
1362 end = PAGE_ALIGN(start+1);
1364 return end;
1367 static void aurora_pa_range(unsigned long start, unsigned long end,
1368 unsigned long offset)
1370 void __iomem *base = l2x0_base;
1371 unsigned long range_end;
1372 unsigned long flags;
1375 * round start and end adresses up to cache line size
1377 start &= ~(CACHE_LINE_SIZE - 1);
1378 end = ALIGN(end, CACHE_LINE_SIZE);
1381 * perform operation on all full cache lines between 'start' and 'end'
1383 while (start < end) {
1384 range_end = aurora_range_end(start, end);
1386 raw_spin_lock_irqsave(&l2x0_lock, flags);
1387 writel_relaxed(start, base + AURORA_RANGE_BASE_ADDR_REG);
1388 writel_relaxed(range_end - CACHE_LINE_SIZE, base + offset);
1389 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
1391 writel_relaxed(0, base + AURORA_SYNC_REG);
1392 start = range_end;
1395 static void aurora_inv_range(unsigned long start, unsigned long end)
1397 aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG);
1400 static void aurora_clean_range(unsigned long start, unsigned long end)
1403 * If L2 is forced to WT, the L2 will always be clean and we
1404 * don't need to do anything here.
1406 if (!l2_wt_override)
1407 aurora_pa_range(start, end, AURORA_CLEAN_RANGE_REG);
1410 static void aurora_flush_range(unsigned long start, unsigned long end)
1412 if (l2_wt_override)
1413 aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG);
1414 else
1415 aurora_pa_range(start, end, AURORA_FLUSH_RANGE_REG);
1418 static void aurora_flush_all(void)
1420 void __iomem *base = l2x0_base;
1421 unsigned long flags;
1423 /* clean all ways */
1424 raw_spin_lock_irqsave(&l2x0_lock, flags);
1425 __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
1426 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
1428 writel_relaxed(0, base + AURORA_SYNC_REG);
1431 static void aurora_cache_sync(void)
1433 writel_relaxed(0, l2x0_base + AURORA_SYNC_REG);
1436 static void aurora_disable(void)
1438 void __iomem *base = l2x0_base;
1439 unsigned long flags;
1441 raw_spin_lock_irqsave(&l2x0_lock, flags);
1442 __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
1443 writel_relaxed(0, base + AURORA_SYNC_REG);
1444 l2c_write_sec(0, base, L2X0_CTRL);
1445 dsb(st);
1446 raw_spin_unlock_irqrestore(&l2x0_lock, flags);
1449 static void aurora_save(void __iomem *base)
1451 l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL);
1452 l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL);
1456 * For Aurora cache in no outer mode, enable via the CP15 coprocessor
1457 * broadcasting of cache commands to L2.
1459 static void __init aurora_enable_no_outer(void __iomem *base,
1460 unsigned num_lock)
1462 u32 u;
1464 asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u));
1465 u |= AURORA_CTRL_FW; /* Set the FW bit */
1466 asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u));
1468 isb();
1470 l2c_enable(base, num_lock);
1473 static void __init aurora_fixup(void __iomem *base, u32 cache_id,
1474 struct outer_cache_fns *fns)
1476 sync_reg_offset = AURORA_SYNC_REG;
1479 static void __init aurora_of_parse(const struct device_node *np,
1480 u32 *aux_val, u32 *aux_mask)
1482 u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU;
1483 u32 mask = AURORA_ACR_REPLACEMENT_MASK;
1485 of_property_read_u32(np, "cache-id-part",
1486 &cache_id_part_number_from_dt);
1488 /* Determine and save the write policy */
1489 l2_wt_override = of_property_read_bool(np, "wt-override");
1491 if (l2_wt_override) {
1492 val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY;
1493 mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK;
1496 if (of_property_read_bool(np, "marvell,ecc-enable")) {
1497 mask |= AURORA_ACR_ECC_EN;
1498 val |= AURORA_ACR_ECC_EN;
1501 if (of_property_read_bool(np, "arm,parity-enable")) {
1502 mask |= AURORA_ACR_PARITY_EN;
1503 val |= AURORA_ACR_PARITY_EN;
1504 } else if (of_property_read_bool(np, "arm,parity-disable")) {
1505 mask |= AURORA_ACR_PARITY_EN;
1508 *aux_val &= ~mask;
1509 *aux_val |= val;
1510 *aux_mask &= ~mask;
1513 static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
1514 .type = "Aurora",
1515 .way_size_0 = SZ_4K,
1516 .num_lock = 4,
1517 .of_parse = aurora_of_parse,
1518 .enable = l2c_enable,
1519 .fixup = aurora_fixup,
1520 .save = aurora_save,
1521 .configure = l2c_configure,
1522 .unlock = l2c_unlock,
1523 .outer_cache = {
1524 .inv_range = aurora_inv_range,
1525 .clean_range = aurora_clean_range,
1526 .flush_range = aurora_flush_range,
1527 .flush_all = aurora_flush_all,
1528 .disable = aurora_disable,
1529 .sync = aurora_cache_sync,
1530 .resume = l2c_resume,
1534 static const struct l2c_init_data of_aurora_no_outer_data __initconst = {
1535 .type = "Aurora",
1536 .way_size_0 = SZ_4K,
1537 .num_lock = 4,
1538 .of_parse = aurora_of_parse,
1539 .enable = aurora_enable_no_outer,
1540 .fixup = aurora_fixup,
1541 .save = aurora_save,
1542 .configure = l2c_configure,
1543 .unlock = l2c_unlock,
1544 .outer_cache = {
1545 .resume = l2c_resume,
1550 * For certain Broadcom SoCs, depending on the address range, different offsets
1551 * need to be added to the address before passing it to L2 for
1552 * invalidation/clean/flush
1554 * Section Address Range Offset EMI
1555 * 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC
1556 * 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS
1557 * 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC
1559 * When the start and end addresses have crossed two different sections, we
1560 * need to break the L2 operation into two, each within its own section.
1561 * For example, if we need to invalidate addresses starts at 0xBFFF0000 and
1562 * ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2)
1563 * 0xC0000000 - 0xC0001000
1565 * Note 1:
1566 * By breaking a single L2 operation into two, we may potentially suffer some
1567 * performance hit, but keep in mind the cross section case is very rare
1569 * Note 2:
1570 * We do not need to handle the case when the start address is in
1571 * Section 1 and the end address is in Section 3, since it is not a valid use
1572 * case
1574 * Note 3:
1575 * Section 1 in practical terms can no longer be used on rev A2. Because of
1576 * that the code does not need to handle section 1 at all.
1579 #define BCM_SYS_EMI_START_ADDR 0x40000000UL
1580 #define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL
1582 #define BCM_SYS_EMI_OFFSET 0x40000000UL
1583 #define BCM_VC_EMI_OFFSET 0x80000000UL
1585 static inline int bcm_addr_is_sys_emi(unsigned long addr)
1587 return (addr >= BCM_SYS_EMI_START_ADDR) &&
1588 (addr < BCM_VC_EMI_SEC3_START_ADDR);
1591 static inline unsigned long bcm_l2_phys_addr(unsigned long addr)
1593 if (bcm_addr_is_sys_emi(addr))
1594 return addr + BCM_SYS_EMI_OFFSET;
1595 else
1596 return addr + BCM_VC_EMI_OFFSET;
1599 static void bcm_inv_range(unsigned long start, unsigned long end)
1601 unsigned long new_start, new_end;
1603 BUG_ON(start < BCM_SYS_EMI_START_ADDR);
1605 if (unlikely(end <= start))
1606 return;
1608 new_start = bcm_l2_phys_addr(start);
1609 new_end = bcm_l2_phys_addr(end);
1611 /* normal case, no cross section between start and end */
1612 if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
1613 l2c210_inv_range(new_start, new_end);
1614 return;
1617 /* They cross sections, so it can only be a cross from section
1618 * 2 to section 3
1620 l2c210_inv_range(new_start,
1621 bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
1622 l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
1623 new_end);
1626 static void bcm_clean_range(unsigned long start, unsigned long end)
1628 unsigned long new_start, new_end;
1630 BUG_ON(start < BCM_SYS_EMI_START_ADDR);
1632 if (unlikely(end <= start))
1633 return;
1635 new_start = bcm_l2_phys_addr(start);
1636 new_end = bcm_l2_phys_addr(end);
1638 /* normal case, no cross section between start and end */
1639 if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
1640 l2c210_clean_range(new_start, new_end);
1641 return;
1644 /* They cross sections, so it can only be a cross from section
1645 * 2 to section 3
1647 l2c210_clean_range(new_start,
1648 bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
1649 l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
1650 new_end);
1653 static void bcm_flush_range(unsigned long start, unsigned long end)
1655 unsigned long new_start, new_end;
1657 BUG_ON(start < BCM_SYS_EMI_START_ADDR);
1659 if (unlikely(end <= start))
1660 return;
1662 if ((end - start) >= l2x0_size) {
1663 outer_cache.flush_all();
1664 return;
1667 new_start = bcm_l2_phys_addr(start);
1668 new_end = bcm_l2_phys_addr(end);
1670 /* normal case, no cross section between start and end */
1671 if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
1672 l2c210_flush_range(new_start, new_end);
1673 return;
1676 /* They cross sections, so it can only be a cross from section
1677 * 2 to section 3
1679 l2c210_flush_range(new_start,
1680 bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
1681 l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
1682 new_end);
1685 /* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */
1686 static const struct l2c_init_data of_bcm_l2x0_data __initconst = {
1687 .type = "BCM-L2C-310",
1688 .way_size_0 = SZ_8K,
1689 .num_lock = 8,
1690 .of_parse = l2c310_of_parse,
1691 .enable = l2c310_enable,
1692 .save = l2c310_save,
1693 .configure = l2c310_configure,
1694 .unlock = l2c310_unlock,
1695 .outer_cache = {
1696 .inv_range = bcm_inv_range,
1697 .clean_range = bcm_clean_range,
1698 .flush_range = bcm_flush_range,
1699 .flush_all = l2c210_flush_all,
1700 .disable = l2c310_disable,
1701 .sync = l2c210_sync,
1702 .resume = l2c310_resume,
1706 static void __init tauros3_save(void __iomem *base)
1708 l2c_save(base);
1710 l2x0_saved_regs.aux2_ctrl =
1711 readl_relaxed(base + TAUROS3_AUX2_CTRL);
1712 l2x0_saved_regs.prefetch_ctrl =
1713 readl_relaxed(base + L310_PREFETCH_CTRL);
1716 static void tauros3_configure(void __iomem *base)
1718 l2c_configure(base);
1719 writel_relaxed(l2x0_saved_regs.aux2_ctrl,
1720 base + TAUROS3_AUX2_CTRL);
1721 writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
1722 base + L310_PREFETCH_CTRL);
1725 static const struct l2c_init_data of_tauros3_data __initconst = {
1726 .type = "Tauros3",
1727 .way_size_0 = SZ_8K,
1728 .num_lock = 8,
1729 .enable = l2c_enable,
1730 .save = tauros3_save,
1731 .configure = tauros3_configure,
1732 .unlock = l2c_unlock,
1733 /* Tauros3 broadcasts L1 cache operations to L2 */
1734 .outer_cache = {
1735 .resume = l2c_resume,
1739 #define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns }
1740 static const struct of_device_id l2x0_ids[] __initconst = {
1741 L2C_ID("arm,l210-cache", of_l2c210_data),
1742 L2C_ID("arm,l220-cache", of_l2c220_data),
1743 L2C_ID("arm,pl310-cache", of_l2c310_data),
1744 L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
1745 L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data),
1746 L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data),
1747 L2C_ID("marvell,tauros3-cache", of_tauros3_data),
1748 /* Deprecated IDs */
1749 L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
1753 int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
1755 const struct l2c_init_data *data;
1756 struct device_node *np;
1757 struct resource res;
1758 u32 cache_id, old_aux;
1759 u32 cache_level = 2;
1760 bool nosync = false;
1762 np = of_find_matching_node(NULL, l2x0_ids);
1763 if (!np)
1764 return -ENODEV;
1766 if (of_address_to_resource(np, 0, &res))
1767 return -ENODEV;
1769 l2x0_base = ioremap(res.start, resource_size(&res));
1770 if (!l2x0_base)
1771 return -ENOMEM;
1773 l2x0_saved_regs.phy_base = res.start;
1775 data = of_match_node(l2x0_ids, np)->data;
1777 if (of_device_is_compatible(np, "arm,pl310-cache") &&
1778 of_property_read_bool(np, "arm,io-coherent"))
1779 data = &of_l2c310_coherent_data;
1781 old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
1782 if (old_aux != ((old_aux & aux_mask) | aux_val)) {
1783 pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n",
1784 old_aux, (old_aux & aux_mask) | aux_val);
1785 } else if (aux_mask != ~0U && aux_val != 0) {
1786 pr_alert("L2C: platform provided aux values match the hardware, so have no effect. Please remove them.\n");
1789 /* All L2 caches are unified, so this property should be specified */
1790 if (!of_property_read_bool(np, "cache-unified"))
1791 pr_err("L2C: device tree omits to specify unified cache\n");
1793 if (of_property_read_u32(np, "cache-level", &cache_level))
1794 pr_err("L2C: device tree omits to specify cache-level\n");
1796 if (cache_level != 2)
1797 pr_err("L2C: device tree specifies invalid cache level\n");
1799 nosync = of_property_read_bool(np, "arm,outer-sync-disable");
1801 /* Read back current (default) hardware configuration */
1802 if (data->save)
1803 data->save(l2x0_base);
1805 /* L2 configuration can only be changed if the cache is disabled */
1806 if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN))
1807 if (data->of_parse)
1808 data->of_parse(np, &aux_val, &aux_mask);
1810 if (cache_id_part_number_from_dt)
1811 cache_id = cache_id_part_number_from_dt;
1812 else
1813 cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
1815 return __l2c_init(data, aux_val, aux_mask, cache_id, nosync);
1817 #endif