2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
6 * Carsten Langgaard, carstenl@mips.com
7 * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
8 * Copyright (C) 2001 Ralf Baechle
9 * Copyright (C) 2013 Imagination Technologies Ltd.
11 * Routines for generic manipulation of the interrupts found on the MIPS
12 * Malta board. The interrupt controller is located in the South Bridge
13 * a PIIX4 device with two internal 82C95 interrupt controllers.
15 #include <linux/init.h>
16 #include <linux/irq.h>
17 #include <linux/irqchip.h>
18 #include <linux/sched.h>
19 #include <linux/smp.h>
20 #include <linux/interrupt.h>
22 #include <linux/of_irq.h>
23 #include <linux/kernel_stat.h>
24 #include <linux/kernel.h>
25 #include <linux/random.h>
27 #include <asm/traps.h>
28 #include <asm/i8259.h>
29 #include <asm/irq_cpu.h>
30 #include <asm/irq_regs.h>
31 #include <asm/mips-boards/malta.h>
32 #include <asm/mips-boards/maltaint.h>
33 #include <asm/mips-cps.h>
34 #include <asm/gt64120.h>
35 #include <asm/mips-boards/generic.h>
36 #include <asm/mips-boards/msc01_pci.h>
37 #include <asm/msc01_ic.h>
38 #include <asm/setup.h>
41 static inline int mips_pcibios_iack(void)
46 * Determine highest priority pending interrupt by performing
47 * a PCI Interrupt Acknowledge cycle.
49 switch (mips_revision_sconid
) {
50 case MIPS_REVISION_SCON_SOCIT
:
51 case MIPS_REVISION_SCON_ROCIT
:
52 case MIPS_REVISION_SCON_SOCITSC
:
53 case MIPS_REVISION_SCON_SOCITSCP
:
54 MSC_READ(MSC01_PCI_IACK
, irq
);
57 case MIPS_REVISION_SCON_GT64120
:
58 irq
= GT_READ(GT_PCI0_IACK_OFS
);
61 case MIPS_REVISION_SCON_BONITO
:
62 /* The following will generate a PCI IACK cycle on the
63 * Bonito controller. It's a little bit kludgy, but it
64 * was the easiest way to implement it in hardware at
67 BONITO_PCIMAP_CFG
= 0x20000;
69 /* Flush Bonito register block */
70 (void) BONITO_PCIMAP_CFG
;
73 irq
= __raw_readl((u32
*)_pcictrl_bonito_pcicfg
);
76 BONITO_PCIMAP_CFG
= 0;
79 pr_emerg("Unknown system controller.\n");
85 static void corehi_irqdispatch(void)
87 unsigned int intedge
, intsteer
, pcicmd
, pcibadaddr
;
88 unsigned int pcimstat
, intisr
, inten
, intpol
;
89 unsigned int intrcause
, datalo
, datahi
;
90 struct pt_regs
*regs
= get_irq_regs();
92 pr_emerg("CoreHI interrupt, shouldn't happen, we die here!\n");
93 pr_emerg("epc : %08lx\nStatus: %08lx\n"
94 "Cause : %08lx\nbadVaddr : %08lx\n",
95 regs
->cp0_epc
, regs
->cp0_status
,
96 regs
->cp0_cause
, regs
->cp0_badvaddr
);
98 /* Read all the registers and then print them as there is a
99 problem with interspersed printk's upsetting the Bonito controller.
100 Do it for the others too.
103 switch (mips_revision_sconid
) {
104 case MIPS_REVISION_SCON_SOCIT
:
105 case MIPS_REVISION_SCON_ROCIT
:
106 case MIPS_REVISION_SCON_SOCITSC
:
107 case MIPS_REVISION_SCON_SOCITSCP
:
110 case MIPS_REVISION_SCON_GT64120
:
111 intrcause
= GT_READ(GT_INTRCAUSE_OFS
);
112 datalo
= GT_READ(GT_CPUERR_ADDRLO_OFS
);
113 datahi
= GT_READ(GT_CPUERR_ADDRHI_OFS
);
114 pr_emerg("GT_INTRCAUSE = %08x\n", intrcause
);
115 pr_emerg("GT_CPUERR_ADDR = %02x%08x\n",
118 case MIPS_REVISION_SCON_BONITO
:
119 pcibadaddr
= BONITO_PCIBADADDR
;
120 pcimstat
= BONITO_PCIMSTAT
;
121 intisr
= BONITO_INTISR
;
122 inten
= BONITO_INTEN
;
123 intpol
= BONITO_INTPOL
;
124 intedge
= BONITO_INTEDGE
;
125 intsteer
= BONITO_INTSTEER
;
126 pcicmd
= BONITO_PCICMD
;
127 pr_emerg("BONITO_INTISR = %08x\n", intisr
);
128 pr_emerg("BONITO_INTEN = %08x\n", inten
);
129 pr_emerg("BONITO_INTPOL = %08x\n", intpol
);
130 pr_emerg("BONITO_INTEDGE = %08x\n", intedge
);
131 pr_emerg("BONITO_INTSTEER = %08x\n", intsteer
);
132 pr_emerg("BONITO_PCICMD = %08x\n", pcicmd
);
133 pr_emerg("BONITO_PCIBADADDR = %08x\n", pcibadaddr
);
134 pr_emerg("BONITO_PCIMSTAT = %08x\n", pcimstat
);
138 die("CoreHi interrupt", regs
);
141 static irqreturn_t
corehi_handler(int irq
, void *dev_id
)
143 corehi_irqdispatch();
147 static msc_irqmap_t msc_irqmap
[] __initdata
= {
148 {MSC01C_INT_TMR
, MSC01_IRQ_EDGE
, 0},
149 {MSC01C_INT_PCI
, MSC01_IRQ_LEVEL
, 0},
151 static int msc_nr_irqs __initdata
= ARRAY_SIZE(msc_irqmap
);
153 static msc_irqmap_t msc_eicirqmap
[] __initdata
= {
154 {MSC01E_INT_SW0
, MSC01_IRQ_LEVEL
, 0},
155 {MSC01E_INT_SW1
, MSC01_IRQ_LEVEL
, 0},
156 {MSC01E_INT_I8259A
, MSC01_IRQ_LEVEL
, 0},
157 {MSC01E_INT_SMI
, MSC01_IRQ_LEVEL
, 0},
158 {MSC01E_INT_COREHI
, MSC01_IRQ_LEVEL
, 0},
159 {MSC01E_INT_CORELO
, MSC01_IRQ_LEVEL
, 0},
160 {MSC01E_INT_TMR
, MSC01_IRQ_EDGE
, 0},
161 {MSC01E_INT_PCI
, MSC01_IRQ_LEVEL
, 0},
162 {MSC01E_INT_PERFCTR
, MSC01_IRQ_LEVEL
, 0},
163 {MSC01E_INT_CPUCTR
, MSC01_IRQ_LEVEL
, 0}
166 static int msc_nr_eicirqs __initdata
= ARRAY_SIZE(msc_eicirqmap
);
168 void __init
arch_init_irq(void)
173 * Preallocate the i8259's expected virq's here. Since irqchip_init()
174 * will probe the irqchips in hierarchial order, i8259 is probed last.
175 * If anything allocates a virq before the i8259 is probed, it will
176 * be given one of the i8259's expected range and consequently setup
177 * of the i8259 will fail.
179 WARN(irq_alloc_descs(I8259A_IRQ_BASE
, I8259A_IRQ_BASE
,
180 16, numa_node_id()) < 0,
181 "Cannot reserve i8259 virqs at IRQ%d\n", I8259A_IRQ_BASE
);
183 i8259_set_poll(mips_pcibios_iack
);
186 switch (mips_revision_sconid
) {
187 case MIPS_REVISION_SCON_SOCIT
:
188 case MIPS_REVISION_SCON_ROCIT
:
190 init_msc_irqs(MIPS_MSC01_IC_REG_BASE
,
191 MSC01E_INT_BASE
, msc_eicirqmap
,
194 init_msc_irqs(MIPS_MSC01_IC_REG_BASE
,
195 MSC01C_INT_BASE
, msc_irqmap
,
199 case MIPS_REVISION_SCON_SOCITSC
:
200 case MIPS_REVISION_SCON_SOCITSCP
:
202 init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE
,
203 MSC01E_INT_BASE
, msc_eicirqmap
,
206 init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE
,
207 MSC01C_INT_BASE
, msc_irqmap
,
211 if (mips_gic_present()) {
212 corehi_irq
= MIPS_CPU_IRQ_BASE
+ MIPSCPU_INT_COREHI
;
213 } else if (cpu_has_veic
) {
214 set_vi_handler(MSC01E_INT_COREHI
, corehi_irqdispatch
);
215 corehi_irq
= MSC01E_INT_BASE
+ MSC01E_INT_COREHI
;
217 corehi_irq
= MIPS_CPU_IRQ_BASE
+ MIPSCPU_INT_COREHI
;
220 if (request_irq(corehi_irq
, corehi_handler
, IRQF_NO_THREAD
, "CoreHi",
222 pr_err("Failed to request irq %d (CoreHi)\n", corehi_irq
);