drivers/bluetooth/hci_ldisc.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *
   4  *  Bluetooth HCI UART driver
   5  *
   6  *  Copyright (C) 2000-2001  Qualcomm Incorporated
   7  *  Copyright (C) 2002-2003  Maxim Krasnyansky <maxk@qualcomm.com>
   8  *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
   9  */
  10
  11 #include <linux/module.h>
  12
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15 #include <linux/types.h>
  16 #include <linux/fcntl.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/ptrace.h>
  19 #include <linux/poll.h>
  20
  21 #include <linux/slab.h>
  22 #include <linux/tty.h>
  23 #include <linux/errno.h>
  24 #include <linux/string.h>
  25 #include <linux/signal.h>
  26 #include <linux/ioctl.h>
  27 #include <linux/skbuff.h>
  28 #include <linux/firmware.h>
  29 #include <linux/serdev.h>
  30
  31 #include <net/bluetooth/bluetooth.h>
  32 #include <net/bluetooth/hci_core.h>
  33
  34 #include "btintel.h"
  35 #include "btbcm.h"
  36 #include "hci_uart.h"
  37
  38 #define VERSION "2.3"
  39
  40 static const struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
  41
  42 int hci_uart_register_proto(const struct hci_uart_proto *p)
  43 {
  44         if (p->id >= HCI_UART_MAX_PROTO)
  45                 return -EINVAL;
  46
  47         if (hup[p->id])
  48                 return -EEXIST;
  49
  50         hup[p->id] = p;
  51
  52         BT_INFO("HCI UART protocol %s registered", p->name);
  53
  54         return 0;
  55 }
  56
  57 int hci_uart_unregister_proto(const struct hci_uart_proto *p)
  58 {
  59         if (p->id >= HCI_UART_MAX_PROTO)
  60                 return -EINVAL;
  61
  62         if (!hup[p->id])
  63                 return -EINVAL;
  64
  65         hup[p->id] = NULL;
  66
  67         return 0;
  68 }
  69
  70 static const struct hci_uart_proto *hci_uart_get_proto(unsigned int id)
  71 {
  72         if (id >= HCI_UART_MAX_PROTO)
  73                 return NULL;
  74
  75         return hup[id];
  76 }
  77
  78 static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
  79 {
  80         struct hci_dev *hdev = hu->hdev;
  81
  82         /* Update HCI stat counters */
  83         switch (pkt_type) {
  84         case HCI_COMMAND_PKT:
  85                 hdev->stat.cmd_tx++;
  86                 break;
  87
  88         case HCI_ACLDATA_PKT:
  89                 hdev->stat.acl_tx++;
  90                 break;
  91
  92         case HCI_SCODATA_PKT:
  93                 hdev->stat.sco_tx++;
  94                 break;
  95         }
  96 }
  97
  98 static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
  99 {
 100         struct sk_buff *skb = hu->tx_skb;
 101
 102         if (!skb) {
 103                 percpu_down_read(&hu->proto_lock);
 104
 105                 if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
 106                         skb = hu->proto->dequeue(hu);
 107
 108                 percpu_up_read(&hu->proto_lock);
 109         } else {
 110                 hu->tx_skb = NULL;
 111         }
 112
 113         return skb;
 114 }
 115
 116 int hci_uart_tx_wakeup(struct hci_uart *hu)
 117 {
 118         /* This may be called in an IRQ context, so we can't sleep. Therefore
 119          * we try to acquire the lock only, and if that fails we assume the
 120          * tty is being closed because that is the only time the write lock is
 121          * acquired. If, however, at some point in the future the write lock
 122          * is also acquired in other situations, then this must be revisited.
 123          */
 124         if (!percpu_down_read_trylock(&hu->proto_lock))
 125                 return 0;
 126
 127         if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
 128                 goto no_schedule;
 129
 130         if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
 131                 set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
 132                 goto no_schedule;
 133         }
 134
 135         BT_DBG("");
 136
 137         schedule_work(&hu->write_work);
 138
 139 no_schedule:
 140         percpu_up_read(&hu->proto_lock);
 141
 142         return 0;
 143 }
 144 EXPORT_SYMBOL_GPL(hci_uart_tx_wakeup);
 145
 146 static void hci_uart_write_work(struct work_struct *work)
 147 {
 148         struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
 149         struct tty_struct *tty = hu->tty;
 150         struct hci_dev *hdev = hu->hdev;
 151         struct sk_buff *skb;
 152
 153         /* REVISIT: should we cope with bad skbs or ->write() returning
 154          * and error value ?
 155          */
 156
 157 restart:
 158         clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
 159
 160         while ((skb = hci_uart_dequeue(hu))) {
 161                 int len;
 162
 163                 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 164                 len = tty->ops->write(tty, skb->data, skb->len);
 165                 hdev->stat.byte_tx += len;
 166
 167                 skb_pull(skb, len);
 168                 if (skb->len) {
 169                         hu->tx_skb = skb;
 170                         break;
 171                 }
 172
 173                 hci_uart_tx_complete(hu, hci_skb_pkt_type(skb));
 174                 kfree_skb(skb);
 175         }
 176
 177         if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state))
 178                 goto restart;
 179
 180         clear_bit(HCI_UART_SENDING, &hu->tx_state);
 181         wake_up_bit(&hu->tx_state, HCI_UART_SENDING);
 182 }
 183
 184 void hci_uart_init_work(struct work_struct *work)
 185 {
 186         struct hci_uart *hu = container_of(work, struct hci_uart, init_ready);
 187         int err;
 188         struct hci_dev *hdev;
 189
 190         if (!test_and_clear_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
 191                 return;
 192
 193         err = hci_register_dev(hu->hdev);
 194         if (err < 0) {
 195                 BT_ERR("Can't register HCI device");
 196                 clear_bit(HCI_UART_PROTO_READY, &hu->flags);
 197                 hu->proto->close(hu);
 198                 hdev = hu->hdev;
 199                 hu->hdev = NULL;
 200                 hci_free_dev(hdev);
 201                 return;
 202         }
 203
 204         set_bit(HCI_UART_REGISTERED, &hu->flags);
 205 }
 206
 207 int hci_uart_init_ready(struct hci_uart *hu)
 208 {
 209         if (!test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
 210                 return -EALREADY;
 211
 212         schedule_work(&hu->init_ready);
 213
 214         return 0;
 215 }
 216
 217 int hci_uart_wait_until_sent(struct hci_uart *hu)
 218 {
 219         return wait_on_bit_timeout(&hu->tx_state, HCI_UART_SENDING,
 220                                    TASK_INTERRUPTIBLE,
 221                                    msecs_to_jiffies(2000));
 222 }
 223
 224 /* ------- Interface to HCI layer ------ */
 225 /* Reset device */
 226 static int hci_uart_flush(struct hci_dev *hdev)
 227 {
 228         struct hci_uart *hu  = hci_get_drvdata(hdev);
 229         struct tty_struct *tty = hu->tty;
 230
 231         BT_DBG("hdev %p tty %p", hdev, tty);
 232
 233         if (hu->tx_skb) {
 234                 kfree_skb(hu->tx_skb); hu->tx_skb = NULL;
 235         }
 236
 237         /* Flush any pending characters in the driver and discipline. */
 238         tty_ldisc_flush(tty);
 239         tty_driver_flush_buffer(tty);
 240
 241         percpu_down_read(&hu->proto_lock);
 242
 243         if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
 244                 hu->proto->flush(hu);
 245
 246         percpu_up_read(&hu->proto_lock);
 247
 248         return 0;
 249 }
 250
 251 /* Initialize device */
 252 static int hci_uart_open(struct hci_dev *hdev)
 253 {
 254         BT_DBG("%s %p", hdev->name, hdev);
 255
 256         /* Undo clearing this from hci_uart_close() */
 257         hdev->flush = hci_uart_flush;
 258
 259         return 0;
 260 }
 261
 262 /* Close device */
 263 static int hci_uart_close(struct hci_dev *hdev)
 264 {
 265         BT_DBG("hdev %p", hdev);
 266
 267         hci_uart_flush(hdev);
 268         hdev->flush = NULL;
 269         return 0;
 270 }
 271
 272 /* Send frames from HCI layer */
 273 static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 274 {
 275         struct hci_uart *hu = hci_get_drvdata(hdev);
 276
 277         BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb),
 278                skb->len);
 279
 280         percpu_down_read(&hu->proto_lock);
 281
 282         if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
 283                 percpu_up_read(&hu->proto_lock);
 284                 return -EUNATCH;
 285         }
 286
 287         hu->proto->enqueue(hu, skb);
 288         percpu_up_read(&hu->proto_lock);
 289
 290         hci_uart_tx_wakeup(hu);
 291
 292         return 0;
 293 }
 294
 295 /* Check the underlying device or tty has flow control support */
 296 bool hci_uart_has_flow_control(struct hci_uart *hu)
 297 {
 298         /* serdev nodes check if the needed operations are present */
 299         if (hu->serdev)
 300                 return true;
 301
 302         if (hu->tty->driver->ops->tiocmget && hu->tty->driver->ops->tiocmset)
 303                 return true;
 304
 305         return false;
 306 }
 307
 308 /* Flow control or un-flow control the device */
 309 void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
 310 {
 311         struct tty_struct *tty = hu->tty;
 312         struct ktermios ktermios;
 313         int status;
 314         unsigned int set = 0;
 315         unsigned int clear = 0;
 316
 317         if (hu->serdev) {
 318                 serdev_device_set_flow_control(hu->serdev, !enable);
 319                 serdev_device_set_rts(hu->serdev, !enable);
 320                 return;
 321         }
 322
 323         if (enable) {
 324                 /* Disable hardware flow control */
 325                 ktermios = tty->termios;
 326                 ktermios.c_cflag &= ~CRTSCTS;
 327                 status = tty_set_termios(tty, &ktermios);
 328                 BT_DBG("Disabling hardware flow control: %s",
 329                        status ? "failed" : "success");
 330
 331                 /* Clear RTS to prevent the device from sending */
 332                 /* Most UARTs need OUT2 to enable interrupts */
 333                 status = tty->driver->ops->tiocmget(tty);
 334                 BT_DBG("Current tiocm 0x%x", status);
 335
 336                 set &= ~(TIOCM_OUT2 | TIOCM_RTS);
 337                 clear = ~set;
 338                 set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
 339                        TIOCM_OUT2 | TIOCM_LOOP;
 340                 clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
 341                          TIOCM_OUT2 | TIOCM_LOOP;
 342                 status = tty->driver->ops->tiocmset(tty, set, clear);
 343                 BT_DBG("Clearing RTS: %s", status ? "failed" : "success");
 344         } else {
 345                 /* Set RTS to allow the device to send again */
 346                 status = tty->driver->ops->tiocmget(tty);
 347                 BT_DBG("Current tiocm 0x%x", status);
 348
 349                 set |= (TIOCM_OUT2 | TIOCM_RTS);
 350                 clear = ~set;
 351                 set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
 352                        TIOCM_OUT2 | TIOCM_LOOP;
 353                 clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
 354                          TIOCM_OUT2 | TIOCM_LOOP;
 355                 status = tty->driver->ops->tiocmset(tty, set, clear);
 356                 BT_DBG("Setting RTS: %s", status ? "failed" : "success");
 357
 358                 /* Re-enable hardware flow control */
 359                 ktermios = tty->termios;
 360                 ktermios.c_cflag |= CRTSCTS;
 361                 status = tty_set_termios(tty, &ktermios);
 362                 BT_DBG("Enabling hardware flow control: %s",
 363                        status ? "failed" : "success");
 364         }
 365 }
 366
 367 void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
 368                          unsigned int oper_speed)
 369 {
 370         hu->init_speed = init_speed;
 371         hu->oper_speed = oper_speed;
 372 }
 373
 374 void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
 375 {
 376         struct tty_struct *tty = hu->tty;
 377         struct ktermios ktermios;
 378
 379         ktermios = tty->termios;
 380         ktermios.c_cflag &= ~CBAUD;
 381         tty_termios_encode_baud_rate(&ktermios, speed, speed);
 382
 383         /* tty_set_termios() return not checked as it is always 0 */
 384         tty_set_termios(tty, &ktermios);
 385
 386         BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name,
 387                tty->termios.c_ispeed, tty->termios.c_ospeed);
 388 }
 389
 390 static int hci_uart_setup(struct hci_dev *hdev)
 391 {
 392         struct hci_uart *hu = hci_get_drvdata(hdev);
 393         struct hci_rp_read_local_version *ver;
 394         struct sk_buff *skb;
 395         unsigned int speed;
 396         int err;
 397
 398         /* Init speed if any */
 399         if (hu->init_speed)
 400                 speed = hu->init_speed;
 401         else if (hu->proto->init_speed)
 402                 speed = hu->proto->init_speed;
 403         else
 404                 speed = 0;
 405
 406         if (speed)
 407                 hci_uart_set_baudrate(hu, speed);
 408
 409         /* Operational speed if any */
 410         if (hu->oper_speed)
 411                 speed = hu->oper_speed;
 412         else if (hu->proto->oper_speed)
 413                 speed = hu->proto->oper_speed;
 414         else
 415                 speed = 0;
 416
 417         if (hu->proto->set_baudrate && speed) {
 418                 err = hu->proto->set_baudrate(hu, speed);
 419                 if (!err)
 420                         hci_uart_set_baudrate(hu, speed);
 421         }
 422
 423         if (hu->proto->setup)
 424                 return hu->proto->setup(hu);
 425
 426         if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags))
 427                 return 0;
 428
 429         skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
 430                              HCI_INIT_TIMEOUT);
 431         if (IS_ERR(skb)) {
 432                 BT_ERR("%s: Reading local version information failed (%ld)",
 433                        hdev->name, PTR_ERR(skb));
 434                 return 0;
 435         }
 436
 437         if (skb->len != sizeof(*ver)) {
 438                 BT_ERR("%s: Event length mismatch for version information",
 439                        hdev->name);
 440                 goto done;
 441         }
 442
 443         ver = (struct hci_rp_read_local_version *)skb->data;
 444
 445         switch (le16_to_cpu(ver->manufacturer)) {
 446 #ifdef CONFIG_BT_HCIUART_INTEL
 447         case 2:
 448                 hdev->set_bdaddr = btintel_set_bdaddr;
 449                 btintel_check_bdaddr(hdev);
 450                 break;
 451 #endif
 452 #ifdef CONFIG_BT_HCIUART_BCM
 453         case 15:
 454                 hdev->set_bdaddr = btbcm_set_bdaddr;
 455                 btbcm_check_bdaddr(hdev);
 456                 break;
 457 #endif
 458         default:
 459                 break;
 460         }
 461
 462 done:
 463         kfree_skb(skb);
 464         return 0;
 465 }
 466
 467 /* ------ LDISC part ------ */
 468 /* hci_uart_tty_open
 469  *
 470  *     Called when line discipline changed to HCI_UART.
 471  *
 472  * Arguments:
 473  *     tty    pointer to tty info structure
 474  * Return Value:
 475  *     0 if success, otherwise error code
 476  */
 477 static int hci_uart_tty_open(struct tty_struct *tty)
 478 {
 479         struct hci_uart *hu;
 480
 481         BT_DBG("tty %p", tty);
 482
 483         /* Error if the tty has no write op instead of leaving an exploitable
 484          * hole
 485          */
 486         if (tty->ops->write == NULL)
 487                 return -EOPNOTSUPP;
 488
 489         hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
 490         if (!hu) {
 491                 BT_ERR("Can't allocate control structure");
 492                 return -ENFILE;
 493         }
 494
 495         tty->disc_data = hu;
 496         hu->tty = tty;
 497         tty->receive_room = 65536;
 498
 499         /* disable alignment support by default */
 500         hu->alignment = 1;
 501         hu->padding = 0;
 502
 503         INIT_WORK(&hu->init_ready, hci_uart_init_work);
 504         INIT_WORK(&hu->write_work, hci_uart_write_work);
 505
 506         percpu_init_rwsem(&hu->proto_lock);
 507
 508         /* Flush any pending characters in the driver */
 509         tty_driver_flush_buffer(tty);
 510
 511         return 0;
 512 }
 513
 514 /* hci_uart_tty_close()
 515  *
 516  *    Called when the line discipline is changed to something
 517  *    else, the tty is closed, or the tty detects a hangup.
 518  */
 519 static void hci_uart_tty_close(struct tty_struct *tty)
 520 {
 521         struct hci_uart *hu = tty->disc_data;
 522         struct hci_dev *hdev;
 523
 524         BT_DBG("tty %p", tty);
 525
 526         /* Detach from the tty */
 527         tty->disc_data = NULL;
 528
 529         if (!hu)
 530                 return;
 531
 532         hdev = hu->hdev;
 533         if (hdev)
 534                 hci_uart_close(hdev);
 535
 536         if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
 537                 percpu_down_write(&hu->proto_lock);
 538                 clear_bit(HCI_UART_PROTO_READY, &hu->flags);
 539                 percpu_up_write(&hu->proto_lock);
 540
 541                 cancel_work_sync(&hu->init_ready);
 542                 cancel_work_sync(&hu->write_work);
 543
 544                 if (hdev) {
 545                         if (test_bit(HCI_UART_REGISTERED, &hu->flags))
 546                                 hci_unregister_dev(hdev);
 547                         hci_free_dev(hdev);
 548                 }
 549                 hu->proto->close(hu);
 550         }
 551         clear_bit(HCI_UART_PROTO_SET, &hu->flags);
 552
 553         percpu_free_rwsem(&hu->proto_lock);
 554
 555         kfree(hu);
 556 }
 557
 558 /* hci_uart_tty_wakeup()
 559  *
 560  *    Callback for transmit wakeup. Called when low level
 561  *    device driver can accept more send data.
 562  *
 563  * Arguments:        tty    pointer to associated tty instance data
 564  * Return Value:    None
 565  */
 566 static void hci_uart_tty_wakeup(struct tty_struct *tty)
 567 {
 568         struct hci_uart *hu = tty->disc_data;
 569
 570         BT_DBG("");
 571
 572         if (!hu)
 573                 return;
 574
 575         clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 576
 577         if (tty != hu->tty)
 578                 return;
 579
 580         if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
 581                 hci_uart_tx_wakeup(hu);
 582 }
 583
 584 /* hci_uart_tty_receive()
 585  *
 586  *     Called by tty low level driver when receive data is
 587  *     available.
 588  *
 589  * Arguments:  tty          pointer to tty isntance data
 590  *             data         pointer to received data
 591  *             flags        pointer to flags for data
 592  *             count        count of received data in bytes
 593  *
 594  * Return Value:    None
 595  */
 596 static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
 597                                  char *flags, int count)
 598 {
 599         struct hci_uart *hu = tty->disc_data;
 600
 601         if (!hu || tty != hu->tty)
 602                 return;
 603
 604         percpu_down_read(&hu->proto_lock);
 605
 606         if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
 607                 percpu_up_read(&hu->proto_lock);
 608                 return;
 609         }
 610
 611         /* It does not need a lock here as it is already protected by a mutex in
 612          * tty caller
 613          */
 614         hu->proto->recv(hu, data, count);
 615         percpu_up_read(&hu->proto_lock);
 616
 617         if (hu->hdev)
 618                 hu->hdev->stat.byte_rx += count;
 619
 620         tty_unthrottle(tty);
 621 }
 622
 623 static int hci_uart_register_dev(struct hci_uart *hu)
 624 {
 625         struct hci_dev *hdev;
 626         int err;
 627
 628         BT_DBG("");
 629
 630         /* Initialize and register HCI device */
 631         hdev = hci_alloc_dev();
 632         if (!hdev) {
 633                 BT_ERR("Can't allocate HCI device");
 634                 return -ENOMEM;
 635         }
 636
 637         hu->hdev = hdev;
 638
 639         hdev->bus = HCI_UART;
 640         hci_set_drvdata(hdev, hu);
 641
 642         /* Only when vendor specific setup callback is provided, consider
 643          * the manufacturer information valid. This avoids filling in the
 644          * value for Ericsson when nothing is specified.
 645          */
 646         if (hu->proto->setup)
 647                 hdev->manufacturer = hu->proto->manufacturer;
 648
 649         hdev->open  = hci_uart_open;
 650         hdev->close = hci_uart_close;
 651         hdev->flush = hci_uart_flush;
 652         hdev->send  = hci_uart_send_frame;
 653         hdev->setup = hci_uart_setup;
 654         SET_HCIDEV_DEV(hdev, hu->tty->dev);
 655
 656         if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
 657                 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
 658
 659         if (test_bit(HCI_UART_EXT_CONFIG, &hu->hdev_flags))
 660                 set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks);
 661
 662         if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags))
 663                 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
 664
 665         if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
 666                 hdev->dev_type = HCI_AMP;
 667         else
 668                 hdev->dev_type = HCI_PRIMARY;
 669
 670         /* Only call open() for the protocol after hdev is fully initialized as
 671          * open() (or a timer/workqueue it starts) may attempt to reference it.
 672          */
 673         err = hu->proto->open(hu);
 674         if (err) {
 675                 hu->hdev = NULL;
 676                 hci_free_dev(hdev);
 677                 return err;
 678         }
 679
 680         if (test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
 681                 return 0;
 682
 683         if (hci_register_dev(hdev) < 0) {
 684                 BT_ERR("Can't register HCI device");
 685                 hu->proto->close(hu);
 686                 hu->hdev = NULL;
 687                 hci_free_dev(hdev);
 688                 return -ENODEV;
 689         }
 690
 691         set_bit(HCI_UART_REGISTERED, &hu->flags);
 692
 693         return 0;
 694 }
 695
 696 static int hci_uart_set_proto(struct hci_uart *hu, int id)
 697 {
 698         const struct hci_uart_proto *p;
 699         int err;
 700
 701         p = hci_uart_get_proto(id);
 702         if (!p)
 703                 return -EPROTONOSUPPORT;
 704
 705         hu->proto = p;
 706
 707         err = hci_uart_register_dev(hu);
 708         if (err) {
 709                 return err;
 710         }
 711
 712         set_bit(HCI_UART_PROTO_READY, &hu->flags);
 713         return 0;
 714 }
 715
 716 static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags)
 717 {
 718         unsigned long valid_flags = BIT(HCI_UART_RAW_DEVICE) |
 719                                     BIT(HCI_UART_RESET_ON_INIT) |
 720                                     BIT(HCI_UART_CREATE_AMP) |
 721                                     BIT(HCI_UART_INIT_PENDING) |
 722                                     BIT(HCI_UART_EXT_CONFIG) |
 723                                     BIT(HCI_UART_VND_DETECT);
 724
 725         if (flags & ~valid_flags)
 726                 return -EINVAL;
 727
 728         hu->hdev_flags = flags;
 729
 730         return 0;
 731 }
 732
 733 /* hci_uart_tty_ioctl()
 734  *
 735  *    Process IOCTL system call for the tty device.
 736  *
 737  * Arguments:
 738  *
 739  *    tty        pointer to tty instance data
 740  *    file       pointer to open file object for device
 741  *    cmd        IOCTL command code
 742  *    arg        argument for IOCTL call (cmd dependent)
 743  *
 744  * Return Value:    Command dependent
 745  */
 746 static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
 747                               unsigned int cmd, unsigned long arg)
 748 {
 749         struct hci_uart *hu = tty->disc_data;
 750         int err = 0;
 751
 752         BT_DBG("");
 753
 754         /* Verify the status of the device */
 755         if (!hu)
 756                 return -EBADF;
 757
 758         switch (cmd) {
 759         case HCIUARTSETPROTO:
 760                 if (!test_and_set_bit(HCI_UART_PROTO_SET, &hu->flags)) {
 761                         err = hci_uart_set_proto(hu, arg);
 762                         if (err)
 763                                 clear_bit(HCI_UART_PROTO_SET, &hu->flags);
 764                 } else
 765                         err = -EBUSY;
 766                 break;
 767
 768         case HCIUARTGETPROTO:
 769                 if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
 770                         err = hu->proto->id;
 771                 else
 772                         err = -EUNATCH;
 773                 break;
 774
 775         case HCIUARTGETDEVICE:
 776                 if (test_bit(HCI_UART_REGISTERED, &hu->flags))
 777                         err = hu->hdev->id;
 778                 else
 779                         err = -EUNATCH;
 780                 break;
 781
 782         case HCIUARTSETFLAGS:
 783                 if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
 784                         err = -EBUSY;
 785                 else
 786                         err = hci_uart_set_flags(hu, arg);
 787                 break;
 788
 789         case HCIUARTGETFLAGS:
 790                 err = hu->hdev_flags;
 791                 break;
 792
 793         default:
 794                 err = n_tty_ioctl_helper(tty, file, cmd, arg);
 795                 break;
 796         }
 797
 798         return err;
 799 }
 800
 801 /*
 802  * We don't provide read/write/poll interface for user space.
 803  */
 804 static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
 805                                  unsigned char __user *buf, size_t nr)
 806 {
 807         return 0;
 808 }
 809
 810 static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file,
 811                                   const unsigned char *data, size_t count)
 812 {
 813         return 0;
 814 }
 815
 816 static __poll_t hci_uart_tty_poll(struct tty_struct *tty,
 817                                       struct file *filp, poll_table *wait)
 818 {
 819         return 0;
 820 }
 821
 822 static int __init hci_uart_init(void)
 823 {
 824         static struct tty_ldisc_ops hci_uart_ldisc;
 825         int err;
 826
 827         BT_INFO("HCI UART driver ver %s", VERSION);
 828
 829         /* Register the tty discipline */
 830
 831         memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
 832         hci_uart_ldisc.magic            = TTY_LDISC_MAGIC;
 833         hci_uart_ldisc.name             = "n_hci";
 834         hci_uart_ldisc.open             = hci_uart_tty_open;
 835         hci_uart_ldisc.close            = hci_uart_tty_close;
 836         hci_uart_ldisc.read             = hci_uart_tty_read;
 837         hci_uart_ldisc.write            = hci_uart_tty_write;
 838         hci_uart_ldisc.ioctl            = hci_uart_tty_ioctl;
 839         hci_uart_ldisc.compat_ioctl     = hci_uart_tty_ioctl;
 840         hci_uart_ldisc.poll             = hci_uart_tty_poll;
 841         hci_uart_ldisc.receive_buf      = hci_uart_tty_receive;
 842         hci_uart_ldisc.write_wakeup     = hci_uart_tty_wakeup;
 843         hci_uart_ldisc.owner            = THIS_MODULE;
 844
 845         err = tty_register_ldisc(N_HCI, &hci_uart_ldisc);
 846         if (err) {
 847                 BT_ERR("HCI line discipline registration failed. (%d)", err);
 848                 return err;
 849         }
 850
 851 #ifdef CONFIG_BT_HCIUART_H4
 852         h4_init();
 853 #endif
 854 #ifdef CONFIG_BT_HCIUART_BCSP
 855         bcsp_init();
 856 #endif
 857 #ifdef CONFIG_BT_HCIUART_LL
 858         ll_init();
 859 #endif
 860 #ifdef CONFIG_BT_HCIUART_ATH3K
 861         ath_init();
 862 #endif
 863 #ifdef CONFIG_BT_HCIUART_3WIRE
 864         h5_init();
 865 #endif
 866 #ifdef CONFIG_BT_HCIUART_INTEL
 867         intel_init();
 868 #endif
 869 #ifdef CONFIG_BT_HCIUART_BCM
 870         bcm_init();
 871 #endif
 872 #ifdef CONFIG_BT_HCIUART_QCA
 873         qca_init();
 874 #endif
 875 #ifdef CONFIG_BT_HCIUART_AG6XX
 876         ag6xx_init();
 877 #endif
 878 #ifdef CONFIG_BT_HCIUART_MRVL
 879         mrvl_init();
 880 #endif
 881
 882         return 0;
 883 }
 884
 885 static void __exit hci_uart_exit(void)
 886 {
 887         int err;
 888
 889 #ifdef CONFIG_BT_HCIUART_H4
 890         h4_deinit();
 891 #endif
 892 #ifdef CONFIG_BT_HCIUART_BCSP
 893         bcsp_deinit();
 894 #endif
 895 #ifdef CONFIG_BT_HCIUART_LL
 896         ll_deinit();
 897 #endif
 898 #ifdef CONFIG_BT_HCIUART_ATH3K
 899         ath_deinit();
 900 #endif
 901 #ifdef CONFIG_BT_HCIUART_3WIRE
 902         h5_deinit();
 903 #endif
 904 #ifdef CONFIG_BT_HCIUART_INTEL
 905         intel_deinit();
 906 #endif
 907 #ifdef CONFIG_BT_HCIUART_BCM
 908         bcm_deinit();
 909 #endif
 910 #ifdef CONFIG_BT_HCIUART_QCA
 911         qca_deinit();
 912 #endif
 913 #ifdef CONFIG_BT_HCIUART_AG6XX
 914         ag6xx_deinit();
 915 #endif
 916 #ifdef CONFIG_BT_HCIUART_MRVL
 917         mrvl_deinit();
 918 #endif
 919
 920         /* Release tty registration of line discipline */
 921         err = tty_unregister_ldisc(N_HCI);
 922         if (err)
 923                 BT_ERR("Can't unregister HCI line discipline (%d)", err);
 924 }
 925
 926 module_init(hci_uart_init);
 927 module_exit(hci_uart_exit);
 928
 929 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 930 MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION);
 931 MODULE_VERSION(VERSION);
 932 MODULE_LICENSE("GPL");
 933 MODULE_ALIAS_LDISC(N_HCI);