Merge tag 'trace-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
[linux/fpc-iii.git] / drivers / pwm / pwm-imx1.c
blob727e0d3e249ea18eda7041d7f41969034f26cb20
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * simple driver for PWM (Pulse Width Modulator) controller
5 * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
6 */
8 #include <linux/bitfield.h>
9 #include <linux/bitops.h>
10 #include <linux/clk.h>
11 #include <linux/delay.h>
12 #include <linux/err.h>
13 #include <linux/io.h>
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/of.h>
17 #include <linux/of_device.h>
18 #include <linux/platform_device.h>
19 #include <linux/pwm.h>
20 #include <linux/slab.h>
22 #define MX1_PWMC 0x00 /* PWM Control Register */
23 #define MX1_PWMS 0x04 /* PWM Sample Register */
24 #define MX1_PWMP 0x08 /* PWM Period Register */
26 #define MX1_PWMC_EN BIT(4)
28 struct pwm_imx1_chip {
29 struct clk *clk_ipg;
30 struct clk *clk_per;
31 void __iomem *mmio_base;
32 struct pwm_chip chip;
35 #define to_pwm_imx1_chip(chip) container_of(chip, struct pwm_imx1_chip, chip)
37 static int pwm_imx1_clk_prepare_enable(struct pwm_chip *chip)
39 struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
40 int ret;
42 ret = clk_prepare_enable(imx->clk_ipg);
43 if (ret)
44 return ret;
46 ret = clk_prepare_enable(imx->clk_per);
47 if (ret) {
48 clk_disable_unprepare(imx->clk_ipg);
49 return ret;
52 return 0;
55 static void pwm_imx1_clk_disable_unprepare(struct pwm_chip *chip)
57 struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
59 clk_disable_unprepare(imx->clk_per);
60 clk_disable_unprepare(imx->clk_ipg);
63 static int pwm_imx1_config(struct pwm_chip *chip,
64 struct pwm_device *pwm, int duty_ns, int period_ns)
66 struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
67 u32 max, p;
70 * The PWM subsystem allows for exact frequencies. However,
71 * I cannot connect a scope on my device to the PWM line and
72 * thus cannot provide the program the PWM controller
73 * exactly. Instead, I'm relying on the fact that the
74 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
75 * function group already. So I'll just modify the PWM sample
76 * register to follow the ratio of duty_ns vs. period_ns
77 * accordingly.
79 * This is good enough for programming the brightness of
80 * the LCD backlight.
82 * The real implementation would divide PERCLK[0] first by
83 * both the prescaler (/1 .. /128) and then by CLKSEL
84 * (/2 .. /16).
86 max = readl(imx->mmio_base + MX1_PWMP);
87 p = max * duty_ns / period_ns;
89 writel(max - p, imx->mmio_base + MX1_PWMS);
91 return 0;
94 static int pwm_imx1_enable(struct pwm_chip *chip, struct pwm_device *pwm)
96 struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
97 u32 value;
98 int ret;
100 ret = pwm_imx1_clk_prepare_enable(chip);
101 if (ret < 0)
102 return ret;
104 value = readl(imx->mmio_base + MX1_PWMC);
105 value |= MX1_PWMC_EN;
106 writel(value, imx->mmio_base + MX1_PWMC);
108 return 0;
111 static void pwm_imx1_disable(struct pwm_chip *chip, struct pwm_device *pwm)
113 struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
114 u32 value;
116 value = readl(imx->mmio_base + MX1_PWMC);
117 value &= ~MX1_PWMC_EN;
118 writel(value, imx->mmio_base + MX1_PWMC);
120 pwm_imx1_clk_disable_unprepare(chip);
123 static const struct pwm_ops pwm_imx1_ops = {
124 .enable = pwm_imx1_enable,
125 .disable = pwm_imx1_disable,
126 .config = pwm_imx1_config,
127 .owner = THIS_MODULE,
130 static const struct of_device_id pwm_imx1_dt_ids[] = {
131 { .compatible = "fsl,imx1-pwm", },
132 { /* sentinel */ }
134 MODULE_DEVICE_TABLE(of, pwm_imx1_dt_ids);
136 static int pwm_imx1_probe(struct platform_device *pdev)
138 struct pwm_imx1_chip *imx;
140 imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
141 if (!imx)
142 return -ENOMEM;
144 platform_set_drvdata(pdev, imx);
146 imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
147 if (IS_ERR(imx->clk_ipg))
148 return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
149 "getting ipg clock failed\n");
151 imx->clk_per = devm_clk_get(&pdev->dev, "per");
152 if (IS_ERR(imx->clk_per))
153 return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
154 "failed to get peripheral clock\n");
156 imx->chip.ops = &pwm_imx1_ops;
157 imx->chip.dev = &pdev->dev;
158 imx->chip.base = -1;
159 imx->chip.npwm = 1;
161 imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
162 if (IS_ERR(imx->mmio_base))
163 return PTR_ERR(imx->mmio_base);
165 return pwmchip_add(&imx->chip);
168 static int pwm_imx1_remove(struct platform_device *pdev)
170 struct pwm_imx1_chip *imx = platform_get_drvdata(pdev);
172 pwm_imx1_clk_disable_unprepare(&imx->chip);
174 return pwmchip_remove(&imx->chip);
177 static struct platform_driver pwm_imx1_driver = {
178 .driver = {
179 .name = "pwm-imx1",
180 .of_match_table = pwm_imx1_dt_ids,
182 .probe = pwm_imx1_probe,
183 .remove = pwm_imx1_remove,
185 module_platform_driver(pwm_imx1_driver);
187 MODULE_LICENSE("GPL v2");
188 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");