1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * SLIM core rproc driver
5 * Copyright (C) 2016 STMicroelectronics
7 * Author: Peter Griffin <peter.griffin@linaro.org>
10 #include <linux/clk.h>
11 #include <linux/err.h>
12 #include <linux/kernel.h>
13 #include <linux/module.h>
15 #include <linux/of_device.h>
16 #include <linux/platform_device.h>
17 #include <linux/remoteproc.h>
18 #include <linux/remoteproc/st_slim_rproc.h>
19 #include "remoteproc_internal.h"
21 /* SLIM core registers */
22 #define SLIM_ID_OFST 0x0
23 #define SLIM_VER_OFST 0x4
25 #define SLIM_EN_OFST 0x8
26 #define SLIM_EN_RUN BIT(0)
28 #define SLIM_CLK_GATE_OFST 0xC
29 #define SLIM_CLK_GATE_DIS BIT(0)
30 #define SLIM_CLK_GATE_RESET BIT(2)
32 #define SLIM_SLIM_PC_OFST 0x20
35 #define SLIM_REV_ID_OFST 0x0
36 #define SLIM_REV_ID_MIN_MASK GENMASK(15, 8)
37 #define SLIM_REV_ID_MIN(id) ((id & SLIM_REV_ID_MIN_MASK) >> 8)
38 #define SLIM_REV_ID_MAJ_MASK GENMASK(23, 16)
39 #define SLIM_REV_ID_MAJ(id) ((id & SLIM_REV_ID_MAJ_MASK) >> 16)
42 /* peripherals registers */
43 #define SLIM_STBUS_SYNC_OFST 0xF88
44 #define SLIM_STBUS_SYNC_DIS BIT(0)
46 #define SLIM_INT_SET_OFST 0xFD4
47 #define SLIM_INT_CLR_OFST 0xFD8
48 #define SLIM_INT_MASK_OFST 0xFDC
50 #define SLIM_CMD_CLR_OFST 0xFC8
51 #define SLIM_CMD_MASK_OFST 0xFCC
53 static const char *mem_names
[ST_SLIM_MEM_MAX
] = {
54 [ST_SLIM_DMEM
] = "dmem",
55 [ST_SLIM_IMEM
] = "imem",
58 static int slim_clk_get(struct st_slim_rproc
*slim_rproc
, struct device
*dev
)
62 for (clk
= 0; clk
< ST_SLIM_MAX_CLK
; clk
++) {
63 slim_rproc
->clks
[clk
] = of_clk_get(dev
->of_node
, clk
);
64 if (IS_ERR(slim_rproc
->clks
[clk
])) {
65 err
= PTR_ERR(slim_rproc
->clks
[clk
]);
66 if (err
== -EPROBE_DEFER
)
68 slim_rproc
->clks
[clk
] = NULL
;
77 clk_put(slim_rproc
->clks
[clk
]);
82 static void slim_clk_disable(struct st_slim_rproc
*slim_rproc
)
86 for (clk
= 0; clk
< ST_SLIM_MAX_CLK
&& slim_rproc
->clks
[clk
]; clk
++)
87 clk_disable_unprepare(slim_rproc
->clks
[clk
]);
90 static int slim_clk_enable(struct st_slim_rproc
*slim_rproc
)
94 for (clk
= 0; clk
< ST_SLIM_MAX_CLK
&& slim_rproc
->clks
[clk
]; clk
++) {
95 ret
= clk_prepare_enable(slim_rproc
->clks
[clk
]);
97 goto err_disable_clks
;
104 clk_disable_unprepare(slim_rproc
->clks
[clk
]);
110 * Remoteproc slim specific device handlers
112 static int slim_rproc_start(struct rproc
*rproc
)
114 struct device
*dev
= &rproc
->dev
;
115 struct st_slim_rproc
*slim_rproc
= rproc
->priv
;
116 unsigned long hw_id
, hw_ver
, fw_rev
;
119 /* disable CPU pipeline clock & reset CPU pipeline */
120 val
= SLIM_CLK_GATE_DIS
| SLIM_CLK_GATE_RESET
;
121 writel(val
, slim_rproc
->slimcore
+ SLIM_CLK_GATE_OFST
);
123 /* disable SLIM core STBus sync */
124 writel(SLIM_STBUS_SYNC_DIS
, slim_rproc
->peri
+ SLIM_STBUS_SYNC_OFST
);
126 /* enable cpu pipeline clock */
127 writel(!SLIM_CLK_GATE_DIS
,
128 slim_rproc
->slimcore
+ SLIM_CLK_GATE_OFST
);
130 /* clear int & cmd mailbox */
131 writel(~0U, slim_rproc
->peri
+ SLIM_INT_CLR_OFST
);
132 writel(~0U, slim_rproc
->peri
+ SLIM_CMD_CLR_OFST
);
134 /* enable all channels cmd & int */
135 writel(~0U, slim_rproc
->peri
+ SLIM_INT_MASK_OFST
);
136 writel(~0U, slim_rproc
->peri
+ SLIM_CMD_MASK_OFST
);
139 writel(SLIM_EN_RUN
, slim_rproc
->slimcore
+ SLIM_EN_OFST
);
141 hw_id
= readl_relaxed(slim_rproc
->slimcore
+ SLIM_ID_OFST
);
142 hw_ver
= readl_relaxed(slim_rproc
->slimcore
+ SLIM_VER_OFST
);
144 fw_rev
= readl(slim_rproc
->mem
[ST_SLIM_DMEM
].cpu_addr
+
147 dev_info(dev
, "fw rev:%ld.%ld on SLIM %ld.%ld\n",
148 SLIM_REV_ID_MAJ(fw_rev
), SLIM_REV_ID_MIN(fw_rev
),
154 static int slim_rproc_stop(struct rproc
*rproc
)
156 struct st_slim_rproc
*slim_rproc
= rproc
->priv
;
159 /* mask all (cmd & int) channels */
160 writel(0UL, slim_rproc
->peri
+ SLIM_INT_MASK_OFST
);
161 writel(0UL, slim_rproc
->peri
+ SLIM_CMD_MASK_OFST
);
163 /* disable cpu pipeline clock */
164 writel(SLIM_CLK_GATE_DIS
, slim_rproc
->slimcore
+ SLIM_CLK_GATE_OFST
);
166 writel(!SLIM_EN_RUN
, slim_rproc
->slimcore
+ SLIM_EN_OFST
);
168 val
= readl(slim_rproc
->slimcore
+ SLIM_EN_OFST
);
169 if (val
& SLIM_EN_RUN
)
170 dev_warn(&rproc
->dev
, "Failed to disable SLIM");
172 dev_dbg(&rproc
->dev
, "slim stopped\n");
177 static void *slim_rproc_da_to_va(struct rproc
*rproc
, u64 da
, size_t len
)
179 struct st_slim_rproc
*slim_rproc
= rproc
->priv
;
183 for (i
= 0; i
< ST_SLIM_MEM_MAX
; i
++) {
184 if (da
!= slim_rproc
->mem
[i
].bus_addr
)
187 if (len
<= slim_rproc
->mem
[i
].size
) {
188 /* __force to make sparse happy with type conversion */
189 va
= (__force
void *)slim_rproc
->mem
[i
].cpu_addr
;
194 dev_dbg(&rproc
->dev
, "da = 0x%llx len = 0x%zx va = 0x%pK\n",
200 static const struct rproc_ops slim_rproc_ops
= {
201 .start
= slim_rproc_start
,
202 .stop
= slim_rproc_stop
,
203 .da_to_va
= slim_rproc_da_to_va
,
204 .get_boot_addr
= rproc_elf_get_boot_addr
,
205 .load
= rproc_elf_load_segments
,
206 .sanity_check
= rproc_elf_sanity_check
,
210 * st_slim_rproc_alloc() - allocate and initialise slim rproc
211 * @pdev: Pointer to the platform_device struct
212 * @fw_name: Name of firmware for rproc to use
214 * Function for allocating and initialising a slim rproc for use by
215 * device drivers whose IP is based around the SLIM core. It
216 * obtains and enables any clocks required by the SLIM core and also
217 * ioremaps the various IO.
219 * Returns st_slim_rproc pointer or PTR_ERR() on error.
222 struct st_slim_rproc
*st_slim_rproc_alloc(struct platform_device
*pdev
,
225 struct device
*dev
= &pdev
->dev
;
226 struct st_slim_rproc
*slim_rproc
;
227 struct device_node
*np
= dev
->of_node
;
229 struct resource
*res
;
233 return ERR_PTR(-EINVAL
);
235 if (!of_device_is_compatible(np
, "st,slim-rproc"))
236 return ERR_PTR(-EINVAL
);
238 rproc
= rproc_alloc(dev
, np
->name
, &slim_rproc_ops
,
239 fw_name
, sizeof(*slim_rproc
));
241 return ERR_PTR(-ENOMEM
);
243 rproc
->has_iommu
= false;
245 slim_rproc
= rproc
->priv
;
246 slim_rproc
->rproc
= rproc
;
248 /* get imem and dmem */
249 for (i
= 0; i
< ARRAY_SIZE(mem_names
); i
++) {
250 res
= platform_get_resource_byname(pdev
, IORESOURCE_MEM
,
253 slim_rproc
->mem
[i
].cpu_addr
= devm_ioremap_resource(dev
, res
);
254 if (IS_ERR(slim_rproc
->mem
[i
].cpu_addr
)) {
255 dev_err(&pdev
->dev
, "devm_ioremap_resource failed\n");
256 err
= PTR_ERR(slim_rproc
->mem
[i
].cpu_addr
);
259 slim_rproc
->mem
[i
].bus_addr
= res
->start
;
260 slim_rproc
->mem
[i
].size
= resource_size(res
);
263 res
= platform_get_resource_byname(pdev
, IORESOURCE_MEM
, "slimcore");
264 slim_rproc
->slimcore
= devm_ioremap_resource(dev
, res
);
265 if (IS_ERR(slim_rproc
->slimcore
)) {
266 dev_err(&pdev
->dev
, "failed to ioremap slimcore IO\n");
267 err
= PTR_ERR(slim_rproc
->slimcore
);
271 res
= platform_get_resource_byname(pdev
, IORESOURCE_MEM
, "peripherals");
272 slim_rproc
->peri
= devm_ioremap_resource(dev
, res
);
273 if (IS_ERR(slim_rproc
->peri
)) {
274 dev_err(&pdev
->dev
, "failed to ioremap peripherals IO\n");
275 err
= PTR_ERR(slim_rproc
->peri
);
279 err
= slim_clk_get(slim_rproc
, dev
);
283 err
= slim_clk_enable(slim_rproc
);
285 dev_err(dev
, "Failed to enable clocks\n");
289 /* Register as a remoteproc device */
290 err
= rproc_add(rproc
);
292 dev_err(dev
, "registration of slim remoteproc failed\n");
299 slim_clk_disable(slim_rproc
);
301 for (i
= 0; i
< ST_SLIM_MAX_CLK
&& slim_rproc
->clks
[i
]; i
++)
302 clk_put(slim_rproc
->clks
[i
]);
307 EXPORT_SYMBOL(st_slim_rproc_alloc
);
310 * st_slim_rproc_put() - put slim rproc resources
311 * @slim_rproc: Pointer to the st_slim_rproc struct
313 * Function for calling respective _put() functions on slim_rproc resources.
316 void st_slim_rproc_put(struct st_slim_rproc
*slim_rproc
)
323 slim_clk_disable(slim_rproc
);
325 for (clk
= 0; clk
< ST_SLIM_MAX_CLK
&& slim_rproc
->clks
[clk
]; clk
++)
326 clk_put(slim_rproc
->clks
[clk
]);
328 rproc_del(slim_rproc
->rproc
);
329 rproc_free(slim_rproc
->rproc
);
331 EXPORT_SYMBOL(st_slim_rproc_put
);
333 MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
334 MODULE_DESCRIPTION("STMicroelectronics SLIM core rproc driver");
335 MODULE_LICENSE("GPL v2");