drivers/usb/host/uhci-pci.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * UHCI HCD (Host Controller Driver) PCI Bus Glue.
   4  *
   5  * Extracted from uhci-hcd.c:
   6  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
   7  *
   8  * (C) Copyright 1999 Linus Torvalds
   9  * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
  10  * (C) Copyright 1999 Randy Dunlap
  11  * (C) Copyright 1999 Georg Acher, acher@in.tum.de
  12  * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
  13  * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
  14  * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
  15  * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
  16  *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
  17  * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
  18  * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
  19  */
  20
  21 #include "pci-quirks.h"
  22
  23 /*
  24  * Make sure the controller is completely inactive, unable to
  25  * generate interrupts or do DMA.
  26  */
  27 static void uhci_pci_reset_hc(struct uhci_hcd *uhci)
  28 {
  29         uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
  30 }
  31
  32 /*
  33  * Initialize a controller that was newly discovered or has just been
  34  * resumed.  In either case we can't be sure of its previous state.
  35  *
  36  * Returns: 1 if the controller was reset, 0 otherwise.
  37  */
  38 static int uhci_pci_check_and_reset_hc(struct uhci_hcd *uhci)
  39 {
  40         return uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)),
  41                                 uhci->io_addr);
  42 }
  43
  44 /*
  45  * Store the basic register settings needed by the controller.
  46  * This function is called at the end of configure_hc in uhci-hcd.c.
  47  */
  48 static void uhci_pci_configure_hc(struct uhci_hcd *uhci)
  49 {
  50         struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
  51
  52         /* Enable PIRQ */
  53         pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
  54
  55         /* Disable platform-specific non-PME# wakeup */
  56         if (pdev->vendor == PCI_VENDOR_ID_INTEL)
  57                 pci_write_config_byte(pdev, USBRES_INTEL, 0);
  58 }
  59
  60 static int uhci_pci_resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
  61 {
  62         int port;
  63
  64         switch (to_pci_dev(uhci_dev(uhci))->vendor) {
  65         default:
  66                 break;
  67
  68         case PCI_VENDOR_ID_GENESYS:
  69                 /* Genesys Logic's GL880S controllers don't generate
  70                  * resume-detect interrupts.
  71                  */
  72                 return 1;
  73
  74         case PCI_VENDOR_ID_INTEL:
  75                 /* Some of Intel's USB controllers have a bug that causes
  76                  * resume-detect interrupts if any port has an over-current
  77                  * condition.  To make matters worse, some motherboards
  78                  * hardwire unused USB ports' over-current inputs active!
  79                  * To prevent problems, we will not enable resume-detect
  80                  * interrupts if any ports are OC.
  81                  */
  82                 for (port = 0; port < uhci->rh_numports; ++port) {
  83                         if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
  84                                         USBPORTSC_OC)
  85                                 return 1;
  86                 }
  87                 break;
  88         }
  89         return 0;
  90 }
  91
  92 static int uhci_pci_global_suspend_mode_is_broken(struct uhci_hcd *uhci)
  93 {
  94         int port;
  95         const char *sys_info;
  96         static const char bad_Asus_board[] = "A7V8X";
  97
  98         /* One of Asus's motherboards has a bug which causes it to
  99          * wake up immediately from suspend-to-RAM if any of the ports
 100          * are connected.  In such cases we will not set EGSM.
 101          */
 102         sys_info = dmi_get_system_info(DMI_BOARD_NAME);
 103         if (sys_info && !strcmp(sys_info, bad_Asus_board)) {
 104                 for (port = 0; port < uhci->rh_numports; ++port) {
 105                         if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
 106                                         USBPORTSC_CCS)
 107                                 return 1;
 108                 }
 109         }
 110
 111         return 0;
 112 }
 113
 114 static int uhci_pci_init(struct usb_hcd *hcd)
 115 {
 116         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 117
 118         uhci->io_addr = (unsigned long) hcd->rsrc_start;
 119
 120         uhci->rh_numports = uhci_count_ports(hcd);
 121
 122         /* Intel controllers report the OverCurrent bit active on.
 123          * VIA controllers report it active off, so we'll adjust the
 124          * bit value.  (It's not standardized in the UHCI spec.)
 125          */
 126         if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA)
 127                 uhci->oc_low = 1;
 128
 129         /* HP's server management chip requires a longer port reset delay. */
 130         if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP)
 131                 uhci->wait_for_hp = 1;
 132
 133         /* Intel controllers use non-PME wakeup signalling */
 134         if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_INTEL)
 135                 device_set_wakeup_capable(uhci_dev(uhci), true);
 136
 137         /* Set up pointers to PCI-specific functions */
 138         uhci->reset_hc = uhci_pci_reset_hc;
 139         uhci->check_and_reset_hc = uhci_pci_check_and_reset_hc;
 140         uhci->configure_hc = uhci_pci_configure_hc;
 141         uhci->resume_detect_interrupts_are_broken =
 142                 uhci_pci_resume_detect_interrupts_are_broken;
 143         uhci->global_suspend_mode_is_broken =
 144                 uhci_pci_global_suspend_mode_is_broken;
 145
 146
 147         /* Kick BIOS off this hardware and reset if the controller
 148          * isn't already safely quiescent.
 149          */
 150         check_and_reset_hc(uhci);
 151         return 0;
 152 }
 153
 154 /* Make sure the controller is quiescent and that we're not using it
 155  * any more.  This is mainly for the benefit of programs which, like kexec,
 156  * expect the hardware to be idle: not doing DMA or generating IRQs.
 157  *
 158  * This routine may be called in a damaged or failing kernel.  Hence we
 159  * do not acquire the spinlock before shutting down the controller.
 160  */
 161 static void uhci_shutdown(struct pci_dev *pdev)
 162 {
 163         struct usb_hcd *hcd = pci_get_drvdata(pdev);
 164
 165         uhci_hc_died(hcd_to_uhci(hcd));
 166 }
 167
 168 #ifdef CONFIG_PM
 169
 170 static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated);
 171
 172 static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 173 {
 174         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 175         struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
 176         int rc = 0;
 177
 178         dev_dbg(uhci_dev(uhci), "%s\n", __func__);
 179
 180         spin_lock_irq(&uhci->lock);
 181         if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
 182                 goto done_okay;         /* Already suspended or dead */
 183
 184         /* All PCI host controllers are required to disable IRQ generation
 185          * at the source, so we must turn off PIRQ.
 186          */
 187         pci_write_config_word(pdev, USBLEGSUP, 0);
 188         clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 189
 190         /* Enable platform-specific non-PME# wakeup */
 191         if (do_wakeup) {
 192                 if (pdev->vendor == PCI_VENDOR_ID_INTEL)
 193                         pci_write_config_byte(pdev, USBRES_INTEL,
 194                                         USBPORT1EN | USBPORT2EN);
 195         }
 196
 197 done_okay:
 198         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 199         spin_unlock_irq(&uhci->lock);
 200
 201         synchronize_irq(hcd->irq);
 202
 203         /* Check for race with a wakeup request */
 204         if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
 205                 uhci_pci_resume(hcd, false);
 206                 rc = -EBUSY;
 207         }
 208         return rc;
 209 }
 210
 211 static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 212 {
 213         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 214
 215         dev_dbg(uhci_dev(uhci), "%s\n", __func__);
 216
 217         /* Since we aren't in D3 any more, it's safe to set this flag
 218          * even if the controller was dead.
 219          */
 220         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 221
 222         spin_lock_irq(&uhci->lock);
 223
 224         /* Make sure resume from hibernation re-enumerates everything */
 225         if (hibernated) {
 226                 uhci->reset_hc(uhci);
 227                 finish_reset(uhci);
 228         }
 229
 230         /* The firmware may have changed the controller settings during
 231          * a system wakeup.  Check it and reconfigure to avoid problems.
 232          */
 233         else {
 234                 check_and_reset_hc(uhci);
 235         }
 236         configure_hc(uhci);
 237
 238         /* Tell the core if the controller had to be reset */
 239         if (uhci->rh_state == UHCI_RH_RESET)
 240                 usb_root_hub_lost_power(hcd->self.root_hub);
 241
 242         spin_unlock_irq(&uhci->lock);
 243
 244         /* If interrupts don't work and remote wakeup is enabled then
 245          * the suspended root hub needs to be polled.
 246          */
 247         if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup)
 248                 set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 249
 250         /* Does the root hub have a port wakeup pending? */
 251         usb_hcd_poll_rh_status(hcd);
 252         return 0;
 253 }
 254
 255 #endif
 256
 257 static const struct hc_driver uhci_driver = {
 258         .description =          hcd_name,
 259         .product_desc =         "UHCI Host Controller",
 260         .hcd_priv_size =        sizeof(struct uhci_hcd),
 261
 262         /* Generic hardware linkage */
 263         .irq =                  uhci_irq,
 264         .flags =                HCD_DMA | HCD_USB11,
 265
 266         /* Basic lifecycle operations */
 267         .reset =                uhci_pci_init,
 268         .start =                uhci_start,
 269 #ifdef CONFIG_PM
 270         .pci_suspend =          uhci_pci_suspend,
 271         .pci_resume =           uhci_pci_resume,
 272         .bus_suspend =          uhci_rh_suspend,
 273         .bus_resume =           uhci_rh_resume,
 274 #endif
 275         .stop =                 uhci_stop,
 276
 277         .urb_enqueue =          uhci_urb_enqueue,
 278         .urb_dequeue =          uhci_urb_dequeue,
 279
 280         .endpoint_disable =     uhci_hcd_endpoint_disable,
 281         .get_frame_number =     uhci_hcd_get_frame_number,
 282
 283         .hub_status_data =      uhci_hub_status_data,
 284         .hub_control =          uhci_hub_control,
 285 };
 286
 287 static const struct pci_device_id uhci_pci_ids[] = { {
 288         /* handle any USB UHCI controller */
 289         PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0),
 290         }, { /* end: all zeroes */ }
 291 };
 292
 293 MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
 294
 295 static int uhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 296 {
 297         return usb_hcd_pci_probe(dev, id, &uhci_driver);
 298 }
 299
 300 static struct pci_driver uhci_pci_driver = {
 301         .name =         hcd_name,
 302         .id_table =     uhci_pci_ids,
 303
 304         .probe =        uhci_pci_probe,
 305         .remove =       usb_hcd_pci_remove,
 306         .shutdown =     uhci_shutdown,
 307
 308 #ifdef CONFIG_PM
 309         .driver =       {
 310                 .pm =   &usb_hcd_pci_pm_ops
 311         },
 312 #endif
 313 };
 314
 315 MODULE_SOFTDEP("pre: ehci_pci");