Merge tag 'trace-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
[linux/fpc-iii.git] / drivers / usb / musb / musb_dma.h
blob7d67b69df0a07d5edf47edb23630a64d0219a107
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * MUSB OTG driver DMA controller abstraction
5 * Copyright 2005 Mentor Graphics Corporation
6 * Copyright (C) 2005-2006 by Texas Instruments
7 * Copyright (C) 2006-2007 Nokia Corporation
8 */
10 #ifndef __MUSB_DMA_H__
11 #define __MUSB_DMA_H__
13 struct musb_hw_ep;
16 * DMA Controller Abstraction
18 * DMA Controllers are abstracted to allow use of a variety of different
19 * implementations of DMA, as allowed by the Inventra USB cores. On the
20 * host side, usbcore sets up the DMA mappings and flushes caches; on the
21 * peripheral side, the gadget controller driver does. Responsibilities
22 * of a DMA controller driver include:
24 * - Handling the details of moving multiple USB packets
25 * in cooperation with the Inventra USB core, including especially
26 * the correct RX side treatment of short packets and buffer-full
27 * states (both of which terminate transfers).
29 * - Knowing the correlation between dma channels and the
30 * Inventra core's local endpoint resources and data direction.
32 * - Maintaining a list of allocated/available channels.
34 * - Updating channel status on interrupts,
35 * whether shared with the Inventra core or separate.
38 #define MUSB_HSDMA_BASE 0x200
39 #define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
40 #define MUSB_HSDMA_CONTROL 0x4
41 #define MUSB_HSDMA_ADDRESS 0x8
42 #define MUSB_HSDMA_COUNT 0xc
44 #define DMA_ADDR_INVALID (~(dma_addr_t)0)
46 #ifdef CONFIG_MUSB_PIO_ONLY
47 #define is_dma_capable() (0)
48 #else
49 #define is_dma_capable() (1)
50 #endif
52 #ifdef CONFIG_USB_UX500_DMA
53 #define musb_dma_ux500(musb) (musb->ops->quirks & MUSB_DMA_UX500)
54 #else
55 #define musb_dma_ux500(musb) 0
56 #endif
58 #ifdef CONFIG_USB_TI_CPPI41_DMA
59 #define musb_dma_cppi41(musb) (musb->ops->quirks & MUSB_DMA_CPPI41)
60 #else
61 #define musb_dma_cppi41(musb) 0
62 #endif
64 #ifdef CONFIG_USB_TI_CPPI_DMA
65 #define musb_dma_cppi(musb) (musb->ops->quirks & MUSB_DMA_CPPI)
66 #else
67 #define musb_dma_cppi(musb) 0
68 #endif
70 #ifdef CONFIG_USB_TUSB_OMAP_DMA
71 #define tusb_dma_omap(musb) (musb->ops->quirks & MUSB_DMA_TUSB_OMAP)
72 #else
73 #define tusb_dma_omap(musb) 0
74 #endif
76 #ifdef CONFIG_USB_INVENTRA_DMA
77 #define musb_dma_inventra(musb) (musb->ops->quirks & MUSB_DMA_INVENTRA)
78 #else
79 #define musb_dma_inventra(musb) 0
80 #endif
82 #if defined(CONFIG_USB_TI_CPPI_DMA) || defined(CONFIG_USB_TI_CPPI41_DMA)
83 #define is_cppi_enabled(musb) \
84 (musb_dma_cppi(musb) || musb_dma_cppi41(musb))
85 #else
86 #define is_cppi_enabled(musb) 0
87 #endif
90 * DMA channel status ... updated by the dma controller driver whenever that
91 * status changes, and protected by the overall controller spinlock.
93 enum dma_channel_status {
94 /* unallocated */
95 MUSB_DMA_STATUS_UNKNOWN,
96 /* allocated ... but not busy, no errors */
97 MUSB_DMA_STATUS_FREE,
98 /* busy ... transactions are active */
99 MUSB_DMA_STATUS_BUSY,
100 /* transaction(s) aborted due to ... dma or memory bus error */
101 MUSB_DMA_STATUS_BUS_ABORT,
102 /* transaction(s) aborted due to ... core error or USB fault */
103 MUSB_DMA_STATUS_CORE_ABORT
106 struct dma_controller;
109 * struct dma_channel - A DMA channel.
110 * @private_data: channel-private data
111 * @max_len: the maximum number of bytes the channel can move in one
112 * transaction (typically representing many USB maximum-sized packets)
113 * @actual_len: how many bytes have been transferred
114 * @status: current channel status (updated e.g. on interrupt)
115 * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
117 * channels are associated with an endpoint for the duration of at least
118 * one usb transfer.
120 struct dma_channel {
121 void *private_data;
122 /* FIXME not void* private_data, but a dma_controller * */
123 size_t max_len;
124 size_t actual_len;
125 enum dma_channel_status status;
126 bool desired_mode;
127 bool rx_packet_done;
131 * dma_channel_status - return status of dma channel
132 * @c: the channel
134 * Returns the software's view of the channel status. If that status is BUSY
135 * then it's possible that the hardware has completed (or aborted) a transfer,
136 * so the driver needs to update that status.
138 static inline enum dma_channel_status
139 dma_channel_status(struct dma_channel *c)
141 return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
145 * struct dma_controller - A DMA Controller.
146 * @musb: the usb controller
147 * @start: call this to start a DMA controller;
148 * return 0 on success, else negative errno
149 * @stop: call this to stop a DMA controller
150 * return 0 on success, else negative errno
151 * @channel_alloc: call this to allocate a DMA channel
152 * @channel_release: call this to release a DMA channel
153 * @channel_abort: call this to abort a pending DMA transaction,
154 * returning it to FREE (but allocated) state
155 * @dma_callback: invoked on DMA completion, useful to run platform
156 * code such IRQ acknowledgment.
158 * Controllers manage dma channels.
160 struct dma_controller {
161 struct musb *musb;
162 struct dma_channel *(*channel_alloc)(struct dma_controller *,
163 struct musb_hw_ep *, u8 is_tx);
164 void (*channel_release)(struct dma_channel *);
165 int (*channel_program)(struct dma_channel *channel,
166 u16 maxpacket, u8 mode,
167 dma_addr_t dma_addr,
168 u32 length);
169 int (*channel_abort)(struct dma_channel *);
170 int (*is_compatible)(struct dma_channel *channel,
171 u16 maxpacket,
172 void *buf, u32 length);
173 void (*dma_callback)(struct dma_controller *);
176 /* called after channel_program(), may indicate a fault */
177 extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
179 #ifdef CONFIG_MUSB_PIO_ONLY
180 static inline struct dma_controller *
181 musb_dma_controller_create(struct musb *m, void __iomem *io)
183 return NULL;
186 static inline void musb_dma_controller_destroy(struct dma_controller *d) { }
188 #else
190 extern struct dma_controller *
191 (*musb_dma_controller_create)(struct musb *, void __iomem *);
193 extern void (*musb_dma_controller_destroy)(struct dma_controller *);
194 #endif
196 /* Platform specific DMA functions */
197 extern struct dma_controller *
198 musbhs_dma_controller_create(struct musb *musb, void __iomem *base);
199 extern void musbhs_dma_controller_destroy(struct dma_controller *c);
200 extern struct dma_controller *
201 musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base);
202 extern irqreturn_t dma_controller_irq(int irq, void *private_data);
204 extern struct dma_controller *
205 tusb_dma_controller_create(struct musb *musb, void __iomem *base);
206 extern void tusb_dma_controller_destroy(struct dma_controller *c);
208 extern struct dma_controller *
209 cppi_dma_controller_create(struct musb *musb, void __iomem *base);
210 extern void cppi_dma_controller_destroy(struct dma_controller *c);
212 extern struct dma_controller *
213 cppi41_dma_controller_create(struct musb *musb, void __iomem *base);
214 extern void cppi41_dma_controller_destroy(struct dma_controller *c);
216 extern struct dma_controller *
217 ux500_dma_controller_create(struct musb *musb, void __iomem *base);
218 extern void ux500_dma_controller_destroy(struct dma_controller *c);
220 #endif /* __MUSB_DMA_H__ */