drivers/usb/renesas_usbhs/common.h

   1 /* SPDX-License-Identifier: GPL-1.0+ */
   2 /*
   3  * Renesas USB driver
   4  *
   5  * Copyright (C) 2011 Renesas Solutions Corp.
   6  * Copyright (C) 2019 Renesas Electronics Corporation
   7  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
   8  */
   9 #ifndef RENESAS_USB_DRIVER_H
  10 #define RENESAS_USB_DRIVER_H
  11
  12 #include <linux/clk.h>
  13 #include <linux/extcon.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/reset.h>
  16 #include <linux/usb/renesas_usbhs.h>
  17
  18 struct usbhs_priv;
  19
  20 #include "mod.h"
  21 #include "pipe.h"
  22
  23 /*
  24  *
  25  *              register define
  26  *
  27  */
  28 #define SYSCFG          0x0000
  29 #define BUSWAIT         0x0002
  30 #define DVSTCTR         0x0008
  31 #define TESTMODE        0x000C
  32 #define CFIFO           0x0014
  33 #define CFIFOSEL        0x0020
  34 #define CFIFOCTR        0x0022
  35 #define D0FIFO          0x0100
  36 #define D0FIFOSEL       0x0028
  37 #define D0FIFOCTR       0x002A
  38 #define D1FIFO          0x0120
  39 #define D1FIFOSEL       0x002C
  40 #define D1FIFOCTR       0x002E
  41 #define INTENB0         0x0030
  42 #define INTENB1         0x0032
  43 #define BRDYENB         0x0036
  44 #define NRDYENB         0x0038
  45 #define BEMPENB         0x003A
  46 #define INTSTS0         0x0040
  47 #define INTSTS1         0x0042
  48 #define BRDYSTS         0x0046
  49 #define NRDYSTS         0x0048
  50 #define BEMPSTS         0x004A
  51 #define FRMNUM          0x004C
  52 #define USBREQ          0x0054  /* USB request type register */
  53 #define USBVAL          0x0056  /* USB request value register */
  54 #define USBINDX         0x0058  /* USB request index register */
  55 #define USBLENG         0x005A  /* USB request length register */
  56 #define DCPCFG          0x005C
  57 #define DCPMAXP         0x005E
  58 #define DCPCTR          0x0060
  59 #define PIPESEL         0x0064
  60 #define PIPECFG         0x0068
  61 #define PIPEBUF         0x006A
  62 #define PIPEMAXP        0x006C
  63 #define PIPEPERI        0x006E
  64 #define PIPEnCTR        0x0070
  65 #define PIPE1TRE        0x0090
  66 #define PIPE1TRN        0x0092
  67 #define PIPE2TRE        0x0094
  68 #define PIPE2TRN        0x0096
  69 #define PIPE3TRE        0x0098
  70 #define PIPE3TRN        0x009A
  71 #define PIPE4TRE        0x009C
  72 #define PIPE4TRN        0x009E
  73 #define PIPE5TRE        0x00A0
  74 #define PIPE5TRN        0x00A2
  75 #define PIPEBTRE        0x00A4
  76 #define PIPEBTRN        0x00A6
  77 #define PIPECTRE        0x00A8
  78 #define PIPECTRN        0x00AA
  79 #define PIPEDTRE        0x00AC
  80 #define PIPEDTRN        0x00AE
  81 #define PIPEETRE        0x00B0
  82 #define PIPEETRN        0x00B2
  83 #define PIPEFTRE        0x00B4
  84 #define PIPEFTRN        0x00B6
  85 #define PIPE9TRE        0x00B8
  86 #define PIPE9TRN        0x00BA
  87 #define PIPEATRE        0x00BC
  88 #define PIPEATRN        0x00BE
  89 #define DEVADD0         0x00D0 /* Device address n configuration */
  90 #define DEVADD1         0x00D2
  91 #define DEVADD2         0x00D4
  92 #define DEVADD3         0x00D6
  93 #define DEVADD4         0x00D8
  94 #define DEVADD5         0x00DA
  95 #define DEVADD6         0x00DC
  96 #define DEVADD7         0x00DE
  97 #define DEVADD8         0x00E0
  98 #define DEVADD9         0x00E2
  99 #define DEVADDA         0x00E4
 100 #define D2FIFOSEL       0x00F0  /* for R-Car Gen2 */
 101 #define D2FIFOCTR       0x00F2  /* for R-Car Gen2 */
 102 #define D3FIFOSEL       0x00F4  /* for R-Car Gen2 */
 103 #define D3FIFOCTR       0x00F6  /* for R-Car Gen2 */
 104 #define SUSPMODE        0x0102  /* for RZ/A */
 105
 106 /* SYSCFG */
 107 #define SCKE    (1 << 10)       /* USB Module Clock Enable */
 108 #define CNEN    (1 << 8)        /* Single-ended receiver operation Enable */
 109 #define HSE     (1 << 7)        /* High-Speed Operation Enable */
 110 #define DCFM    (1 << 6)        /* Controller Function Select */
 111 #define DRPD    (1 << 5)        /* D+ Line/D- Line Resistance Control */
 112 #define DPRPU   (1 << 4)        /* D+ Line Resistance Control */
 113 #define USBE    (1 << 0)        /* USB Module Operation Enable */
 114 #define UCKSEL  (1 << 2)        /* Clock Select for RZ/A1 */
 115 #define UPLLE   (1 << 1)        /* USB PLL Enable for RZ/A1 */
 116
 117 /* DVSTCTR */
 118 #define EXTLP   (1 << 10)       /* Controls the EXTLP pin output state */
 119 #define PWEN    (1 << 9)        /* Controls the PWEN pin output state */
 120 #define USBRST  (1 << 6)        /* Bus Reset Output */
 121 #define UACT    (1 << 4)        /* USB Bus Enable */
 122 #define RHST    (0x7)           /* Reset Handshake */
 123 #define  RHST_LOW_SPEED  1      /* Low-speed connection */
 124 #define  RHST_FULL_SPEED 2      /* Full-speed connection */
 125 #define  RHST_HIGH_SPEED 3      /* High-speed connection */
 126
 127 /* CFIFOSEL */
 128 #define DREQE   (1 << 12)       /* DMA Transfer Request Enable */
 129 #define MBW_32  (0x2 << 10)     /* CFIFO Port Access Bit Width */
 130
 131 /* CFIFOCTR */
 132 #define BVAL    (1 << 15)       /* Buffer Memory Enable Flag */
 133 #define BCLR    (1 << 14)       /* CPU buffer clear */
 134 #define FRDY    (1 << 13)       /* FIFO Port Ready */
 135 #define DTLN_MASK (0x0FFF)      /* Receive Data Length */
 136
 137 /* INTENB0 */
 138 #define VBSE    (1 << 15)       /* Enable IRQ VBUS_0 and VBUSIN_0 */
 139 #define RSME    (1 << 14)       /* Enable IRQ Resume */
 140 #define SOFE    (1 << 13)       /* Enable IRQ Frame Number Update */
 141 #define DVSE    (1 << 12)       /* Enable IRQ Device State Transition */
 142 #define CTRE    (1 << 11)       /* Enable IRQ Control Stage Transition */
 143 #define BEMPE   (1 << 10)       /* Enable IRQ Buffer Empty */
 144 #define NRDYE   (1 << 9)        /* Enable IRQ Buffer Not Ready Response */
 145 #define BRDYE   (1 << 8)        /* Enable IRQ Buffer Ready */
 146
 147 /* INTENB1 */
 148 #define BCHGE   (1 << 14)       /* USB Bus Change Interrupt Enable */
 149 #define DTCHE   (1 << 12)       /* Disconnection Detect Interrupt Enable */
 150 #define ATTCHE  (1 << 11)       /* Connection Detect Interrupt Enable */
 151 #define EOFERRE (1 << 6)        /* EOF Error Detect Interrupt Enable */
 152 #define SIGNE   (1 << 5)        /* Setup Transaction Error Interrupt Enable */
 153 #define SACKE   (1 << 4)        /* Setup Transaction ACK Interrupt Enable */
 154
 155 /* INTSTS0 */
 156 #define VBINT   (1 << 15)       /* VBUS0_0 and VBUS1_0 Interrupt Status */
 157 #define DVST    (1 << 12)       /* Device State Transition Interrupt Status */
 158 #define CTRT    (1 << 11)       /* Control Stage Interrupt Status */
 159 #define BEMP    (1 << 10)       /* Buffer Empty Interrupt Status */
 160 #define BRDY    (1 << 8)        /* Buffer Ready Interrupt Status */
 161 #define VBSTS   (1 << 7)        /* VBUS_0 and VBUSIN_0 Input Status */
 162 #define VALID   (1 << 3)        /* USB Request Receive */
 163
 164 #define DVSQ_MASK               (0x7 << 4)      /* Device State */
 165 #define  POWER_STATE            (0 << 4)
 166 #define  DEFAULT_STATE          (1 << 4)
 167 #define  ADDRESS_STATE          (2 << 4)
 168 #define  CONFIGURATION_STATE    (3 << 4)
 169 #define  SUSPENDED_STATE        (4 << 4)
 170
 171 #define CTSQ_MASK               (0x7)   /* Control Transfer Stage */
 172 #define  IDLE_SETUP_STAGE       0       /* Idle stage or setup stage */
 173 #define  READ_DATA_STAGE        1       /* Control read data stage */
 174 #define  READ_STATUS_STAGE      2       /* Control read status stage */
 175 #define  WRITE_DATA_STAGE       3       /* Control write data stage */
 176 #define  WRITE_STATUS_STAGE     4       /* Control write status stage */
 177 #define  NODATA_STATUS_STAGE    5       /* Control write NoData status stage */
 178 #define  SEQUENCE_ERROR         6       /* Control transfer sequence error */
 179
 180 /* INTSTS1 */
 181 #define OVRCR   (1 << 15) /* OVRCR Interrupt Status */
 182 #define BCHG    (1 << 14) /* USB Bus Change Interrupt Status */
 183 #define DTCH    (1 << 12) /* USB Disconnection Detect Interrupt Status */
 184 #define ATTCH   (1 << 11) /* ATTCH Interrupt Status */
 185 #define EOFERR  (1 << 6)  /* EOF Error Detect Interrupt Status */
 186 #define SIGN    (1 << 5)  /* Setup Transaction Error Interrupt Status */
 187 #define SACK    (1 << 4)  /* Setup Transaction ACK Response Interrupt Status */
 188
 189 /* PIPECFG */
 190 /* DCPCFG */
 191 #define TYPE_NONE       (0 << 14)       /* Transfer Type */
 192 #define TYPE_BULK       (1 << 14)
 193 #define TYPE_INT        (2 << 14)
 194 #define TYPE_ISO        (3 << 14)
 195 #define BFRE            (1 << 10)       /* BRDY Interrupt Operation Spec. */
 196 #define DBLB            (1 << 9)        /* Double Buffer Mode */
 197 #define SHTNAK          (1 << 7)        /* Pipe Disable in Transfer End */
 198 #define DIR_OUT         (1 << 4)        /* Transfer Direction */
 199
 200 /* PIPEMAXP */
 201 /* DCPMAXP */
 202 #define DEVSEL_MASK     (0xF << 12)     /* Device Select */
 203 #define DCP_MAXP_MASK   (0x7F)
 204 #define PIPE_MAXP_MASK  (0x7FF)
 205
 206 /* PIPEBUF */
 207 #define BUFSIZE_SHIFT   10
 208 #define BUFSIZE_MASK    (0x1F << BUFSIZE_SHIFT)
 209 #define BUFNMB_MASK     (0xFF)
 210
 211 /* PIPEnCTR */
 212 /* DCPCTR */
 213 #define BSTS            (1 << 15)       /* Buffer Status */
 214 #define SUREQ           (1 << 14)       /* Sending SETUP Token */
 215 #define INBUFM          (1 << 14)       /* (PIPEnCTR) Transfer Buffer Monitor */
 216 #define CSSTS           (1 << 12)       /* CSSTS Status */
 217 #define ACLRM           (1 << 9)        /* Buffer Auto-Clear Mode */
 218 #define SQCLR           (1 << 8)        /* Toggle Bit Clear */
 219 #define SQSET           (1 << 7)        /* Toggle Bit Set */
 220 #define SQMON           (1 << 6)        /* Toggle Bit Check */
 221 #define PBUSY           (1 << 5)        /* Pipe Busy */
 222 #define PID_MASK        (0x3)           /* Response PID */
 223 #define  PID_NAK        0
 224 #define  PID_BUF        1
 225 #define  PID_STALL10    2
 226 #define  PID_STALL11    3
 227
 228 #define CCPL            (1 << 2)        /* Control Transfer End Enable */
 229
 230 /* PIPEnTRE */
 231 #define TRENB           (1 << 9)        /* Transaction Counter Enable */
 232 #define TRCLR           (1 << 8)        /* Transaction Counter Clear */
 233
 234 /* FRMNUM */
 235 #define FRNM_MASK       (0x7FF)
 236
 237 /* DEVADDn */
 238 #define UPPHUB(x)       (((x) & 0xF) << 11)     /* HUB Register */
 239 #define HUBPORT(x)      (((x) & 0x7) << 8)      /* HUB Port for Target Device */
 240 #define USBSPD(x)       (((x) & 0x3) << 6)      /* Device Transfer Rate */
 241 #define USBSPD_SPEED_LOW        0x1
 242 #define USBSPD_SPEED_FULL       0x2
 243 #define USBSPD_SPEED_HIGH       0x3
 244
 245 /* SUSPMODE */
 246 #define SUSPM           (1 << 14)       /* SuspendM Control */
 247
 248 /*
 249  *              struct
 250  */
 251 struct usbhs_priv {
 252
 253         void __iomem *base;
 254         unsigned int irq;
 255         unsigned long irqflags;
 256
 257         const struct renesas_usbhs_platform_callback *pfunc;
 258         struct renesas_usbhs_driver_param       dparam;
 259
 260         struct delayed_work notify_hotplug_work;
 261         struct platform_device *pdev;
 262
 263         struct extcon_dev *edev;
 264
 265         spinlock_t              lock;
 266
 267         /*
 268          * module control
 269          */
 270         struct usbhs_mod_info mod_info;
 271
 272         /*
 273          * pipe control
 274          */
 275         struct usbhs_pipe_info pipe_info;
 276
 277         /*
 278          * fifo control
 279          */
 280         struct usbhs_fifo_info fifo_info;
 281
 282         struct phy *phy;
 283         struct reset_control *rsts;
 284         struct clk *clks[2];
 285 };
 286
 287 /*
 288  * common
 289  */
 290 u16 usbhs_read(struct usbhs_priv *priv, u32 reg);
 291 void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data);
 292 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data);
 293
 294 #define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f)
 295 #define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f)
 296
 297 int usbhs_get_id_as_gadget(struct platform_device *pdev);
 298
 299 /*
 300  * sysconfig
 301  */
 302 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable);
 303 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable);
 304 void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable);
 305 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode);
 306
 307 /*
 308  * usb request
 309  */
 310 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
 311 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
 312
 313 /*
 314  * bus
 315  */
 316 void usbhs_bus_send_sof_enable(struct usbhs_priv *priv);
 317 void usbhs_bus_send_reset(struct usbhs_priv *priv);
 318 int usbhs_bus_get_speed(struct usbhs_priv *priv);
 319 int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable);
 320 int usbhsc_schedule_notify_hotplug(struct platform_device *pdev);
 321
 322 /*
 323  * frame
 324  */
 325 int usbhs_frame_get_num(struct usbhs_priv *priv);
 326
 327 /*
 328  * device config
 329  */
 330 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub,
 331                            u16 hubport, u16 speed);
 332
 333 /*
 334  * interrupt functions
 335  */
 336 void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit);
 337
 338 /*
 339  * data
 340  */
 341 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev);
 342 #define usbhs_get_dparam(priv, param)   (priv->dparam.param)
 343 #define usbhs_priv_to_pdev(priv)        (priv->pdev)
 344 #define usbhs_priv_to_dev(priv)         (&priv->pdev->dev)
 345 #define usbhs_priv_to_lock(priv)        (&priv->lock)
 346
 347 #endif /* RENESAS_USB_DRIVER_H */