Merge tag 'trace-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
[linux/fpc-iii.git] / drivers / watchdog / octeon-wdt-main.c
blobfde9e739b43611c43fca353c6cfc5580eb77c02a
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Octeon Watchdog driver
5 * Copyright (C) 2007-2017 Cavium, Inc.
7 * Converted to use WATCHDOG_CORE by Aaro Koskinen <aaro.koskinen@iki.fi>.
9 * Some parts derived from wdt.c
11 * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
12 * All Rights Reserved.
14 * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
15 * warranty for any of this software. This material is provided
16 * "AS-IS" and at no charge.
18 * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
20 * The OCTEON watchdog has a maximum timeout of 2^32 * io_clock.
21 * For most systems this is less than 10 seconds, so to allow for
22 * software to request longer watchdog heartbeats, we maintain software
23 * counters to count multiples of the base rate. If the system locks
24 * up in such a manner that we can not run the software counters, the
25 * only result is a watchdog reset sooner than was requested. But
26 * that is OK, because in this case userspace would likely not be able
27 * to do anything anyhow.
29 * The hardware watchdog interval we call the period. The OCTEON
30 * watchdog goes through several stages, after the first period an
31 * irq is asserted, then if it is not reset, after the next period NMI
32 * is asserted, then after an additional period a chip wide soft reset.
33 * So for the software counters, we reset watchdog after each period
34 * and decrement the counter. But for the last two periods we need to
35 * let the watchdog progress to the NMI stage so we disable the irq
36 * and let it proceed. Once in the NMI, we print the register state
37 * to the serial port and then wait for the reset.
39 * A watchdog is maintained for each CPU in the system, that way if
40 * one CPU suffers a lockup, we also get a register dump and reset.
41 * The userspace ping resets the watchdog on all CPUs.
43 * Before userspace opens the watchdog device, we still run the
44 * watchdogs to catch any lockups that may be kernel related.
48 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
50 #include <linux/interrupt.h>
51 #include <linux/watchdog.h>
52 #include <linux/cpumask.h>
53 #include <linux/module.h>
54 #include <linux/delay.h>
55 #include <linux/cpu.h>
56 #include <linux/irq.h>
58 #include <asm/mipsregs.h>
59 #include <asm/uasm.h>
61 #include <asm/octeon/octeon.h>
62 #include <asm/octeon/cvmx-boot-vector.h>
63 #include <asm/octeon/cvmx-ciu2-defs.h>
64 #include <asm/octeon/cvmx-rst-defs.h>
66 /* Watchdog interrupt major block number (8 MSBs of intsn) */
67 #define WD_BLOCK_NUMBER 0x01
69 static int divisor;
71 /* The count needed to achieve timeout_sec. */
72 static unsigned int timeout_cnt;
74 /* The maximum period supported. */
75 static unsigned int max_timeout_sec;
77 /* The current period. */
78 static unsigned int timeout_sec;
80 /* Set to non-zero when userspace countdown mode active */
81 static bool do_countdown;
82 static unsigned int countdown_reset;
83 static unsigned int per_cpu_countdown[NR_CPUS];
85 static cpumask_t irq_enabled_cpus;
87 #define WD_TIMO 60 /* Default heartbeat = 60 seconds */
89 #define CVMX_GSERX_SCRATCH(offset) (CVMX_ADD_IO_SEG(0x0001180090000020ull) + ((offset) & 15) * 0x1000000ull)
91 static int heartbeat = WD_TIMO;
92 module_param(heartbeat, int, 0444);
93 MODULE_PARM_DESC(heartbeat,
94 "Watchdog heartbeat in seconds. (0 < heartbeat, default="
95 __MODULE_STRING(WD_TIMO) ")");
97 static bool nowayout = WATCHDOG_NOWAYOUT;
98 module_param(nowayout, bool, 0444);
99 MODULE_PARM_DESC(nowayout,
100 "Watchdog cannot be stopped once started (default="
101 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
103 static int disable;
104 module_param(disable, int, 0444);
105 MODULE_PARM_DESC(disable,
106 "Disable the watchdog entirely (default=0)");
108 static struct cvmx_boot_vector_element *octeon_wdt_bootvector;
110 void octeon_wdt_nmi_stage2(void);
112 static int cpu2core(int cpu)
114 #ifdef CONFIG_SMP
115 return cpu_logical_map(cpu) & 0x3f;
116 #else
117 return cvmx_get_core_num();
118 #endif
122 * Poke the watchdog when an interrupt is received
124 * @cpl:
125 * @dev_id:
127 * Returns
129 static irqreturn_t octeon_wdt_poke_irq(int cpl, void *dev_id)
131 int cpu = raw_smp_processor_id();
132 unsigned int core = cpu2core(cpu);
133 int node = cpu_to_node(cpu);
135 if (do_countdown) {
136 if (per_cpu_countdown[cpu] > 0) {
137 /* We're alive, poke the watchdog */
138 cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1);
139 per_cpu_countdown[cpu]--;
140 } else {
141 /* Bad news, you are about to reboot. */
142 disable_irq_nosync(cpl);
143 cpumask_clear_cpu(cpu, &irq_enabled_cpus);
145 } else {
146 /* Not open, just ping away... */
147 cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1);
149 return IRQ_HANDLED;
152 /* From setup.c */
153 extern int prom_putchar(char c);
156 * Write a string to the uart
158 * @str: String to write
160 static void octeon_wdt_write_string(const char *str)
162 /* Just loop writing one byte at a time */
163 while (*str)
164 prom_putchar(*str++);
168 * Write a hex number out of the uart
170 * @value: Number to display
171 * @digits: Number of digits to print (1 to 16)
173 static void octeon_wdt_write_hex(u64 value, int digits)
175 int d;
176 int v;
178 for (d = 0; d < digits; d++) {
179 v = (value >> ((digits - d - 1) * 4)) & 0xf;
180 if (v >= 10)
181 prom_putchar('a' + v - 10);
182 else
183 prom_putchar('0' + v);
187 static const char reg_name[][3] = {
188 "$0", "at", "v0", "v1", "a0", "a1", "a2", "a3",
189 "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
190 "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
191 "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
195 * NMI stage 3 handler. NMIs are handled in the following manner:
196 * 1) The first NMI handler enables CVMSEG and transfers from
197 * the bootbus region into normal memory. It is careful to not
198 * destroy any registers.
199 * 2) The second stage handler uses CVMSEG to save the registers
200 * and create a stack for C code. It then calls the third level
201 * handler with one argument, a pointer to the register values.
202 * 3) The third, and final, level handler is the following C
203 * function that prints out some useful infomration.
205 * @reg: Pointer to register state before the NMI
207 void octeon_wdt_nmi_stage3(u64 reg[32])
209 u64 i;
211 unsigned int coreid = cvmx_get_core_num();
213 * Save status and cause early to get them before any changes
214 * might happen.
216 u64 cp0_cause = read_c0_cause();
217 u64 cp0_status = read_c0_status();
218 u64 cp0_error_epc = read_c0_errorepc();
219 u64 cp0_epc = read_c0_epc();
221 /* Delay so output from all cores output is not jumbled together. */
222 udelay(85000 * coreid);
224 octeon_wdt_write_string("\r\n*** NMI Watchdog interrupt on Core 0x");
225 octeon_wdt_write_hex(coreid, 2);
226 octeon_wdt_write_string(" ***\r\n");
227 for (i = 0; i < 32; i++) {
228 octeon_wdt_write_string("\t");
229 octeon_wdt_write_string(reg_name[i]);
230 octeon_wdt_write_string("\t0x");
231 octeon_wdt_write_hex(reg[i], 16);
232 if (i & 1)
233 octeon_wdt_write_string("\r\n");
235 octeon_wdt_write_string("\terr_epc\t0x");
236 octeon_wdt_write_hex(cp0_error_epc, 16);
238 octeon_wdt_write_string("\tepc\t0x");
239 octeon_wdt_write_hex(cp0_epc, 16);
240 octeon_wdt_write_string("\r\n");
242 octeon_wdt_write_string("\tstatus\t0x");
243 octeon_wdt_write_hex(cp0_status, 16);
244 octeon_wdt_write_string("\tcause\t0x");
245 octeon_wdt_write_hex(cp0_cause, 16);
246 octeon_wdt_write_string("\r\n");
248 /* The CIU register is different for each Octeon model. */
249 if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
250 octeon_wdt_write_string("\tsrc_wd\t0x");
251 octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_SRC_PPX_IP2_WDOG(coreid)), 16);
252 octeon_wdt_write_string("\ten_wd\t0x");
253 octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_EN_PPX_IP2_WDOG(coreid)), 16);
254 octeon_wdt_write_string("\r\n");
255 octeon_wdt_write_string("\tsrc_rml\t0x");
256 octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_SRC_PPX_IP2_RML(coreid)), 16);
257 octeon_wdt_write_string("\ten_rml\t0x");
258 octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_EN_PPX_IP2_RML(coreid)), 16);
259 octeon_wdt_write_string("\r\n");
260 octeon_wdt_write_string("\tsum\t0x");
261 octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_SUM_PPX_IP2(coreid)), 16);
262 octeon_wdt_write_string("\r\n");
263 } else if (!octeon_has_feature(OCTEON_FEATURE_CIU3)) {
264 octeon_wdt_write_string("\tsum0\t0x");
265 octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_SUM0(coreid * 2)), 16);
266 octeon_wdt_write_string("\ten0\t0x");
267 octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)), 16);
268 octeon_wdt_write_string("\r\n");
271 octeon_wdt_write_string("*** Chip soft reset soon ***\r\n");
274 * G-30204: We must trigger a soft reset before watchdog
275 * does an incomplete job of doing it.
277 if (OCTEON_IS_OCTEON3() && !OCTEON_IS_MODEL(OCTEON_CN70XX)) {
278 u64 scr;
279 unsigned int node = cvmx_get_node_num();
280 unsigned int lcore = cvmx_get_local_core_num();
281 union cvmx_ciu_wdogx ciu_wdog;
284 * Wait for other cores to print out information, but
285 * not too long. Do the soft reset before watchdog
286 * can trigger it.
288 do {
289 ciu_wdog.u64 = cvmx_read_csr_node(node, CVMX_CIU_WDOGX(lcore));
290 } while (ciu_wdog.s.cnt > 0x10000);
292 scr = cvmx_read_csr_node(0, CVMX_GSERX_SCRATCH(0));
293 scr |= 1 << 11; /* Indicate watchdog in bit 11 */
294 cvmx_write_csr_node(0, CVMX_GSERX_SCRATCH(0), scr);
295 cvmx_write_csr_node(0, CVMX_RST_SOFT_RST, 1);
299 static int octeon_wdt_cpu_to_irq(int cpu)
301 unsigned int coreid;
302 int node;
303 int irq;
305 coreid = cpu2core(cpu);
306 node = cpu_to_node(cpu);
308 if (octeon_has_feature(OCTEON_FEATURE_CIU3)) {
309 struct irq_domain *domain;
310 int hwirq;
312 domain = octeon_irq_get_block_domain(node,
313 WD_BLOCK_NUMBER);
314 hwirq = WD_BLOCK_NUMBER << 12 | 0x200 | coreid;
315 irq = irq_find_mapping(domain, hwirq);
316 } else {
317 irq = OCTEON_IRQ_WDOG0 + coreid;
319 return irq;
322 static int octeon_wdt_cpu_pre_down(unsigned int cpu)
324 unsigned int core;
325 int node;
326 union cvmx_ciu_wdogx ciu_wdog;
328 core = cpu2core(cpu);
330 node = cpu_to_node(cpu);
332 /* Poke the watchdog to clear out its state */
333 cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1);
335 /* Disable the hardware. */
336 ciu_wdog.u64 = 0;
337 cvmx_write_csr_node(node, CVMX_CIU_WDOGX(core), ciu_wdog.u64);
339 free_irq(octeon_wdt_cpu_to_irq(cpu), octeon_wdt_poke_irq);
340 return 0;
343 static int octeon_wdt_cpu_online(unsigned int cpu)
345 unsigned int core;
346 unsigned int irq;
347 union cvmx_ciu_wdogx ciu_wdog;
348 int node;
349 struct irq_domain *domain;
350 int hwirq;
352 core = cpu2core(cpu);
353 node = cpu_to_node(cpu);
355 octeon_wdt_bootvector[core].target_ptr = (u64)octeon_wdt_nmi_stage2;
357 /* Disable it before doing anything with the interrupts. */
358 ciu_wdog.u64 = 0;
359 cvmx_write_csr_node(node, CVMX_CIU_WDOGX(core), ciu_wdog.u64);
361 per_cpu_countdown[cpu] = countdown_reset;
363 if (octeon_has_feature(OCTEON_FEATURE_CIU3)) {
364 /* Must get the domain for the watchdog block */
365 domain = octeon_irq_get_block_domain(node, WD_BLOCK_NUMBER);
367 /* Get a irq for the wd intsn (hardware interrupt) */
368 hwirq = WD_BLOCK_NUMBER << 12 | 0x200 | core;
369 irq = irq_create_mapping(domain, hwirq);
370 irqd_set_trigger_type(irq_get_irq_data(irq),
371 IRQ_TYPE_EDGE_RISING);
372 } else
373 irq = OCTEON_IRQ_WDOG0 + core;
375 if (request_irq(irq, octeon_wdt_poke_irq,
376 IRQF_NO_THREAD, "octeon_wdt", octeon_wdt_poke_irq))
377 panic("octeon_wdt: Couldn't obtain irq %d", irq);
379 /* Must set the irq affinity here */
380 if (octeon_has_feature(OCTEON_FEATURE_CIU3)) {
381 cpumask_t mask;
383 cpumask_clear(&mask);
384 cpumask_set_cpu(cpu, &mask);
385 irq_set_affinity(irq, &mask);
388 cpumask_set_cpu(cpu, &irq_enabled_cpus);
390 /* Poke the watchdog to clear out its state */
391 cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1);
393 /* Finally enable the watchdog now that all handlers are installed */
394 ciu_wdog.u64 = 0;
395 ciu_wdog.s.len = timeout_cnt;
396 ciu_wdog.s.mode = 3; /* 3 = Interrupt + NMI + Soft-Reset */
397 cvmx_write_csr_node(node, CVMX_CIU_WDOGX(core), ciu_wdog.u64);
399 return 0;
402 static int octeon_wdt_ping(struct watchdog_device __always_unused *wdog)
404 int cpu;
405 int coreid;
406 int node;
408 if (disable)
409 return 0;
411 for_each_online_cpu(cpu) {
412 coreid = cpu2core(cpu);
413 node = cpu_to_node(cpu);
414 cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(coreid), 1);
415 per_cpu_countdown[cpu] = countdown_reset;
416 if ((countdown_reset || !do_countdown) &&
417 !cpumask_test_cpu(cpu, &irq_enabled_cpus)) {
418 /* We have to enable the irq */
419 enable_irq(octeon_wdt_cpu_to_irq(cpu));
420 cpumask_set_cpu(cpu, &irq_enabled_cpus);
423 return 0;
426 static void octeon_wdt_calc_parameters(int t)
428 unsigned int periods;
430 timeout_sec = max_timeout_sec;
434 * Find the largest interrupt period, that can evenly divide
435 * the requested heartbeat time.
437 while ((t % timeout_sec) != 0)
438 timeout_sec--;
440 periods = t / timeout_sec;
443 * The last two periods are after the irq is disabled, and
444 * then to the nmi, so we subtract them off.
447 countdown_reset = periods > 2 ? periods - 2 : 0;
448 heartbeat = t;
449 timeout_cnt = ((octeon_get_io_clock_rate() / divisor) * timeout_sec) >> 8;
452 static int octeon_wdt_set_timeout(struct watchdog_device *wdog,
453 unsigned int t)
455 int cpu;
456 int coreid;
457 union cvmx_ciu_wdogx ciu_wdog;
458 int node;
460 if (t <= 0)
461 return -1;
463 octeon_wdt_calc_parameters(t);
465 if (disable)
466 return 0;
468 for_each_online_cpu(cpu) {
469 coreid = cpu2core(cpu);
470 node = cpu_to_node(cpu);
471 cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(coreid), 1);
472 ciu_wdog.u64 = 0;
473 ciu_wdog.s.len = timeout_cnt;
474 ciu_wdog.s.mode = 3; /* 3 = Interrupt + NMI + Soft-Reset */
475 cvmx_write_csr_node(node, CVMX_CIU_WDOGX(coreid), ciu_wdog.u64);
476 cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(coreid), 1);
478 octeon_wdt_ping(wdog); /* Get the irqs back on. */
479 return 0;
482 static int octeon_wdt_start(struct watchdog_device *wdog)
484 octeon_wdt_ping(wdog);
485 do_countdown = 1;
486 return 0;
489 static int octeon_wdt_stop(struct watchdog_device *wdog)
491 do_countdown = 0;
492 octeon_wdt_ping(wdog);
493 return 0;
496 static const struct watchdog_info octeon_wdt_info = {
497 .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
498 .identity = "OCTEON",
501 static const struct watchdog_ops octeon_wdt_ops = {
502 .owner = THIS_MODULE,
503 .start = octeon_wdt_start,
504 .stop = octeon_wdt_stop,
505 .ping = octeon_wdt_ping,
506 .set_timeout = octeon_wdt_set_timeout,
509 static struct watchdog_device octeon_wdt = {
510 .info = &octeon_wdt_info,
511 .ops = &octeon_wdt_ops,
514 static enum cpuhp_state octeon_wdt_online;
516 * Module/ driver initialization.
518 * Returns Zero on success
520 static int __init octeon_wdt_init(void)
522 int ret;
524 octeon_wdt_bootvector = cvmx_boot_vector_get();
525 if (!octeon_wdt_bootvector) {
526 pr_err("Error: Cannot allocate boot vector.\n");
527 return -ENOMEM;
530 if (OCTEON_IS_MODEL(OCTEON_CN68XX))
531 divisor = 0x200;
532 else if (OCTEON_IS_MODEL(OCTEON_CN78XX))
533 divisor = 0x400;
534 else
535 divisor = 0x100;
538 * Watchdog time expiration length = The 16 bits of LEN
539 * represent the most significant bits of a 24 bit decrementer
540 * that decrements every divisor cycle.
542 * Try for a timeout of 5 sec, if that fails a smaller number
543 * of even seconds,
545 max_timeout_sec = 6;
546 do {
547 max_timeout_sec--;
548 timeout_cnt = ((octeon_get_io_clock_rate() / divisor) * max_timeout_sec) >> 8;
549 } while (timeout_cnt > 65535);
551 BUG_ON(timeout_cnt == 0);
553 octeon_wdt_calc_parameters(heartbeat);
555 pr_info("Initial granularity %d Sec\n", timeout_sec);
557 octeon_wdt.timeout = timeout_sec;
558 octeon_wdt.max_timeout = UINT_MAX;
560 watchdog_set_nowayout(&octeon_wdt, nowayout);
562 ret = watchdog_register_device(&octeon_wdt);
563 if (ret) {
564 pr_err("watchdog_register_device() failed: %d\n", ret);
565 return ret;
568 if (disable) {
569 pr_notice("disabled\n");
570 return 0;
573 cpumask_clear(&irq_enabled_cpus);
575 ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "watchdog/octeon:online",
576 octeon_wdt_cpu_online, octeon_wdt_cpu_pre_down);
577 if (ret < 0)
578 goto err;
579 octeon_wdt_online = ret;
580 return 0;
581 err:
582 cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0);
583 watchdog_unregister_device(&octeon_wdt);
584 return ret;
588 * Module / driver shutdown
590 static void __exit octeon_wdt_cleanup(void)
592 watchdog_unregister_device(&octeon_wdt);
594 if (disable)
595 return;
597 cpuhp_remove_state(octeon_wdt_online);
600 * Disable the boot-bus memory, the code it points to is soon
601 * to go missing.
603 cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0);
606 MODULE_LICENSE("GPL");
607 MODULE_AUTHOR("Cavium Inc. <support@cavium.com>");
608 MODULE_DESCRIPTION("Cavium Inc. OCTEON Watchdog driver.");
609 module_init(octeon_wdt_init);
610 module_exit(octeon_wdt_cleanup);