4 * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
5 * Copyright 2002-2005, Instant802 Networks, Inc.
6 * Copyright 2005-2006, Devicescape Software, Inc.
7 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
8 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * Copyright 2007-2010, Intel Corporation
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 #include <linux/ieee80211.h>
17 #include <linux/slab.h>
18 #include <linux/export.h>
19 #include <net/mac80211.h>
20 #include "ieee80211_i.h"
21 #include "driver-ops.h"
25 * DOC: TX A-MPDU aggregation
27 * Aggregation on the TX side requires setting the hardware flag
28 * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed
29 * packets with a flag indicating A-MPDU aggregation. The driver
30 * or device is responsible for actually aggregating the frames,
31 * as well as deciding how many and which to aggregate.
33 * When TX aggregation is started by some subsystem (usually the rate
34 * control algorithm would be appropriate) by calling the
35 * ieee80211_start_tx_ba_session() function, the driver will be
36 * notified via its @ampdu_action function, with the
37 * %IEEE80211_AMPDU_TX_START action.
39 * In response to that, the driver is later required to call the
40 * ieee80211_start_tx_ba_cb_irqsafe() function, which will really
41 * start the aggregation session after the peer has also responded.
42 * If the peer responds negatively, the session will be stopped
43 * again right away. Note that it is possible for the aggregation
44 * session to be stopped before the driver has indicated that it
45 * is done setting it up, in which case it must not indicate the
48 * Also note that, since we also need to wait for a response from
49 * the peer, the driver is notified of the completion of the
50 * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the
51 * @ampdu_action callback.
53 * Similarly, when the aggregation session is stopped by the peer
54 * or something calling ieee80211_stop_tx_ba_session(), the driver's
55 * @ampdu_action function will be called with the action
56 * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
57 * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
58 * Note that the sta can get destroyed before the BA tear down is
62 static void ieee80211_send_addba_request(struct ieee80211_sub_if_data
*sdata
,
63 const u8
*da
, u16 tid
,
64 u8 dialog_token
, u16 start_seq_num
,
65 u16 agg_size
, u16 timeout
)
67 struct ieee80211_local
*local
= sdata
->local
;
69 struct ieee80211_mgmt
*mgmt
;
72 skb
= dev_alloc_skb(sizeof(*mgmt
) + local
->hw
.extra_tx_headroom
);
77 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
78 mgmt
= (struct ieee80211_mgmt
*) skb_put(skb
, 24);
80 memcpy(mgmt
->da
, da
, ETH_ALEN
);
81 memcpy(mgmt
->sa
, sdata
->vif
.addr
, ETH_ALEN
);
82 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
||
83 sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
||
84 sdata
->vif
.type
== NL80211_IFTYPE_MESH_POINT
)
85 memcpy(mgmt
->bssid
, sdata
->vif
.addr
, ETH_ALEN
);
86 else if (sdata
->vif
.type
== NL80211_IFTYPE_STATION
)
87 memcpy(mgmt
->bssid
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
88 else if (sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
)
89 memcpy(mgmt
->bssid
, sdata
->u
.ibss
.bssid
, ETH_ALEN
);
91 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
92 IEEE80211_STYPE_ACTION
);
94 skb_put(skb
, 1 + sizeof(mgmt
->u
.action
.u
.addba_req
));
96 mgmt
->u
.action
.category
= WLAN_CATEGORY_BACK
;
97 mgmt
->u
.action
.u
.addba_req
.action_code
= WLAN_ACTION_ADDBA_REQ
;
99 mgmt
->u
.action
.u
.addba_req
.dialog_token
= dialog_token
;
100 capab
= (u16
)(1 << 1); /* bit 1 aggregation policy */
101 capab
|= (u16
)(tid
<< 2); /* bit 5:2 TID number */
102 capab
|= (u16
)(agg_size
<< 6); /* bit 15:6 max size of aggergation */
104 mgmt
->u
.action
.u
.addba_req
.capab
= cpu_to_le16(capab
);
106 mgmt
->u
.action
.u
.addba_req
.timeout
= cpu_to_le16(timeout
);
107 mgmt
->u
.action
.u
.addba_req
.start_seq_num
=
108 cpu_to_le16(start_seq_num
<< 4);
110 ieee80211_tx_skb(sdata
, skb
);
113 void ieee80211_send_bar(struct ieee80211_vif
*vif
, u8
*ra
, u16 tid
, u16 ssn
)
115 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
116 struct ieee80211_local
*local
= sdata
->local
;
118 struct ieee80211_bar
*bar
;
121 skb
= dev_alloc_skb(sizeof(*bar
) + local
->hw
.extra_tx_headroom
);
125 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
126 bar
= (struct ieee80211_bar
*)skb_put(skb
, sizeof(*bar
));
127 memset(bar
, 0, sizeof(*bar
));
128 bar
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_CTL
|
129 IEEE80211_STYPE_BACK_REQ
);
130 memcpy(bar
->ra
, ra
, ETH_ALEN
);
131 memcpy(bar
->ta
, sdata
->vif
.addr
, ETH_ALEN
);
132 bar_control
|= (u16
)IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL
;
133 bar_control
|= (u16
)IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA
;
134 bar_control
|= (u16
)(tid
<< IEEE80211_BAR_CTRL_TID_INFO_SHIFT
);
135 bar
->control
= cpu_to_le16(bar_control
);
136 bar
->start_seq_num
= cpu_to_le16(ssn
);
138 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
|
139 IEEE80211_TX_CTL_REQ_TX_STATUS
;
140 ieee80211_tx_skb_tid(sdata
, skb
, tid
);
142 EXPORT_SYMBOL(ieee80211_send_bar
);
144 void ieee80211_assign_tid_tx(struct sta_info
*sta
, int tid
,
145 struct tid_ampdu_tx
*tid_tx
)
147 lockdep_assert_held(&sta
->ampdu_mlme
.mtx
);
148 lockdep_assert_held(&sta
->lock
);
149 rcu_assign_pointer(sta
->ampdu_mlme
.tid_tx
[tid
], tid_tx
);
153 * When multiple aggregation sessions on multiple stations
154 * are being created/destroyed simultaneously, we need to
155 * refcount the global queue stop caused by that in order
156 * to not get into a situation where one of the aggregation
157 * setup or teardown re-enables queues before the other is
158 * ready to handle that.
160 * These two functions take care of this issue by keeping
161 * a global "agg_queue_stop" refcount.
163 static void __acquires(agg_queue
)
164 ieee80211_stop_queue_agg(struct ieee80211_sub_if_data
*sdata
, int tid
)
166 int queue
= sdata
->vif
.hw_queue
[ieee80211_ac_from_tid(tid
)];
168 /* we do refcounting here, so don't use the queue reason refcounting */
170 if (atomic_inc_return(&sdata
->local
->agg_queue_stop
[queue
]) == 1)
171 ieee80211_stop_queue_by_reason(
172 &sdata
->local
->hw
, queue
,
173 IEEE80211_QUEUE_STOP_REASON_AGGREGATION
,
175 __acquire(agg_queue
);
178 static void __releases(agg_queue
)
179 ieee80211_wake_queue_agg(struct ieee80211_sub_if_data
*sdata
, int tid
)
181 int queue
= sdata
->vif
.hw_queue
[ieee80211_ac_from_tid(tid
)];
183 if (atomic_dec_return(&sdata
->local
->agg_queue_stop
[queue
]) == 0)
184 ieee80211_wake_queue_by_reason(
185 &sdata
->local
->hw
, queue
,
186 IEEE80211_QUEUE_STOP_REASON_AGGREGATION
,
188 __release(agg_queue
);
192 * splice packets from the STA's pending to the local pending,
193 * requires a call to ieee80211_agg_splice_finish later
195 static void __acquires(agg_queue
)
196 ieee80211_agg_splice_packets(struct ieee80211_sub_if_data
*sdata
,
197 struct tid_ampdu_tx
*tid_tx
, u16 tid
)
199 struct ieee80211_local
*local
= sdata
->local
;
200 int queue
= sdata
->vif
.hw_queue
[ieee80211_ac_from_tid(tid
)];
203 ieee80211_stop_queue_agg(sdata
, tid
);
206 "TID %d gone but expected when splicing aggregates from the pending queue\n",
210 if (!skb_queue_empty(&tid_tx
->pending
)) {
211 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
212 /* copy over remaining packets */
213 skb_queue_splice_tail_init(&tid_tx
->pending
,
214 &local
->pending
[queue
]);
215 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
219 static void __releases(agg_queue
)
220 ieee80211_agg_splice_finish(struct ieee80211_sub_if_data
*sdata
, u16 tid
)
222 ieee80211_wake_queue_agg(sdata
, tid
);
225 static void ieee80211_remove_tid_tx(struct sta_info
*sta
, int tid
)
227 struct tid_ampdu_tx
*tid_tx
;
229 lockdep_assert_held(&sta
->ampdu_mlme
.mtx
);
230 lockdep_assert_held(&sta
->lock
);
232 tid_tx
= rcu_dereference_protected_tid_tx(sta
, tid
);
235 * When we get here, the TX path will not be lockless any more wrt.
236 * aggregation, since the OPERATIONAL bit has long been cleared.
237 * Thus it will block on getting the lock, if it occurs. So if we
238 * stop the queue now, we will not get any more packets, and any
239 * that might be being processed will wait for us here, thereby
240 * guaranteeing that no packets go to the tid_tx pending queue any
244 ieee80211_agg_splice_packets(sta
->sdata
, tid_tx
, tid
);
246 /* future packets must not find the tid_tx struct any more */
247 ieee80211_assign_tid_tx(sta
, tid
, NULL
);
249 ieee80211_agg_splice_finish(sta
->sdata
, tid
);
251 kfree_rcu(tid_tx
, rcu_head
);
254 int ___ieee80211_stop_tx_ba_session(struct sta_info
*sta
, u16 tid
,
255 enum ieee80211_agg_stop_reason reason
)
257 struct ieee80211_local
*local
= sta
->local
;
258 struct tid_ampdu_tx
*tid_tx
;
259 enum ieee80211_ampdu_mlme_action action
;
262 lockdep_assert_held(&sta
->ampdu_mlme
.mtx
);
265 case AGG_STOP_DECLINED
:
266 case AGG_STOP_LOCAL_REQUEST
:
267 case AGG_STOP_PEER_REQUEST
:
268 action
= IEEE80211_AMPDU_TX_STOP_CONT
;
270 case AGG_STOP_DESTROY_STA
:
271 action
= IEEE80211_AMPDU_TX_STOP_FLUSH
;
278 spin_lock_bh(&sta
->lock
);
280 tid_tx
= rcu_dereference_protected_tid_tx(sta
, tid
);
282 spin_unlock_bh(&sta
->lock
);
287 * if we're already stopping ignore any new requests to stop
288 * unless we're destroying it in which case notify the driver
290 if (test_bit(HT_AGG_STATE_STOPPING
, &tid_tx
->state
)) {
291 spin_unlock_bh(&sta
->lock
);
292 if (reason
!= AGG_STOP_DESTROY_STA
)
294 ret
= drv_ampdu_action(local
, sta
->sdata
,
295 IEEE80211_AMPDU_TX_STOP_FLUSH_CONT
,
296 &sta
->sta
, tid
, NULL
, 0);
301 if (test_bit(HT_AGG_STATE_WANT_START
, &tid_tx
->state
)) {
302 /* not even started yet! */
303 ieee80211_assign_tid_tx(sta
, tid
, NULL
);
304 spin_unlock_bh(&sta
->lock
);
305 kfree_rcu(tid_tx
, rcu_head
);
309 set_bit(HT_AGG_STATE_STOPPING
, &tid_tx
->state
);
311 spin_unlock_bh(&sta
->lock
);
313 ht_dbg(sta
->sdata
, "Tx BA session stop requested for %pM tid %u\n",
316 del_timer_sync(&tid_tx
->addba_resp_timer
);
317 del_timer_sync(&tid_tx
->session_timer
);
320 * After this packets are no longer handed right through
321 * to the driver but are put onto tid_tx->pending instead,
322 * with locking to ensure proper access.
324 clear_bit(HT_AGG_STATE_OPERATIONAL
, &tid_tx
->state
);
327 * There might be a few packets being processed right now (on
328 * another CPU) that have already gotten past the aggregation
329 * check when it was still OPERATIONAL and consequently have
330 * IEEE80211_TX_CTL_AMPDU set. In that case, this code might
331 * call into the driver at the same time or even before the
332 * TX paths calls into it, which could confuse the driver.
334 * Wait for all currently running TX paths to finish before
335 * telling the driver. New packets will not go through since
336 * the aggregation session is no longer OPERATIONAL.
340 tid_tx
->stop_initiator
= reason
== AGG_STOP_PEER_REQUEST
?
341 WLAN_BACK_RECIPIENT
:
343 tid_tx
->tx_stop
= reason
== AGG_STOP_LOCAL_REQUEST
;
345 ret
= drv_ampdu_action(local
, sta
->sdata
, action
,
346 &sta
->sta
, tid
, NULL
, 0);
348 /* HW shall not deny going back to legacy */
351 * We may have pending packets get stuck in this case...
352 * Not bothering with a workaround for now.
357 * In the case of AGG_STOP_DESTROY_STA, the driver won't
358 * necessarily call ieee80211_stop_tx_ba_cb(), so this may
359 * seem like we can leave the tid_tx data pending forever.
360 * This is true, in a way, but "forever" is only until the
361 * station struct is actually destroyed. In the meantime,
362 * leaving it around ensures that we don't transmit packets
363 * to the driver on this TID which might confuse it.
370 * After sending add Block Ack request we activated a timer until
371 * add Block Ack response will arrive from the recipient.
372 * If this timer expires sta_addba_resp_timer_expired will be executed.
374 static void sta_addba_resp_timer_expired(unsigned long data
)
376 /* not an elegant detour, but there is no choice as the timer passes
377 * only one argument, and both sta_info and TID are needed, so init
378 * flow in sta_info_create gives the TID as data, while the timer_to_id
379 * array gives the sta through container_of */
380 u16 tid
= *(u8
*)data
;
381 struct sta_info
*sta
= container_of((void *)data
,
382 struct sta_info
, timer_to_tid
[tid
]);
383 struct tid_ampdu_tx
*tid_tx
;
385 /* check if the TID waits for addBA response */
387 tid_tx
= rcu_dereference(sta
->ampdu_mlme
.tid_tx
[tid
]);
389 test_bit(HT_AGG_STATE_RESPONSE_RECEIVED
, &tid_tx
->state
)) {
392 "timer expired on %pM tid %d but we are not (or no longer) expecting addBA response there\n",
397 ht_dbg(sta
->sdata
, "addBA response timer expired on %pM tid %d\n",
400 ieee80211_stop_tx_ba_session(&sta
->sta
, tid
);
404 void ieee80211_tx_ba_session_handle_start(struct sta_info
*sta
, int tid
)
406 struct tid_ampdu_tx
*tid_tx
;
407 struct ieee80211_local
*local
= sta
->local
;
408 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
412 tid_tx
= rcu_dereference_protected_tid_tx(sta
, tid
);
415 * Start queuing up packets for this aggregation session.
416 * We're going to release them once the driver is OK with
419 clear_bit(HT_AGG_STATE_WANT_START
, &tid_tx
->state
);
422 * Make sure no packets are being processed. This ensures that
423 * we have a valid starting sequence number and that in-flight
424 * packets have been flushed out and no packets for this TID
425 * will go into the driver during the ampdu_action call.
429 start_seq_num
= sta
->tid_seq
[tid
] >> 4;
431 ret
= drv_ampdu_action(local
, sdata
, IEEE80211_AMPDU_TX_START
,
432 &sta
->sta
, tid
, &start_seq_num
, 0);
435 "BA request denied - HW unavailable for %pM tid %d\n",
437 spin_lock_bh(&sta
->lock
);
438 ieee80211_agg_splice_packets(sdata
, tid_tx
, tid
);
439 ieee80211_assign_tid_tx(sta
, tid
, NULL
);
440 ieee80211_agg_splice_finish(sdata
, tid
);
441 spin_unlock_bh(&sta
->lock
);
443 kfree_rcu(tid_tx
, rcu_head
);
447 /* activate the timer for the recipient's addBA response */
448 mod_timer(&tid_tx
->addba_resp_timer
, jiffies
+ ADDBA_RESP_INTERVAL
);
449 ht_dbg(sdata
, "activated addBA response timer on %pM tid %d\n",
452 spin_lock_bh(&sta
->lock
);
453 sta
->ampdu_mlme
.last_addba_req_time
[tid
] = jiffies
;
454 sta
->ampdu_mlme
.addba_req_num
[tid
]++;
455 spin_unlock_bh(&sta
->lock
);
457 /* send AddBA request */
458 ieee80211_send_addba_request(sdata
, sta
->sta
.addr
, tid
,
459 tid_tx
->dialog_token
, start_seq_num
,
460 local
->hw
.max_tx_aggregation_subframes
,
465 * After accepting the AddBA Response we activated a timer,
466 * resetting it after each frame that we send.
468 static void sta_tx_agg_session_timer_expired(unsigned long data
)
470 /* not an elegant detour, but there is no choice as the timer passes
471 * only one argument, and various sta_info are needed here, so init
472 * flow in sta_info_create gives the TID as data, while the timer_to_id
473 * array gives the sta through container_of */
474 u8
*ptid
= (u8
*)data
;
475 u8
*timer_to_id
= ptid
- *ptid
;
476 struct sta_info
*sta
= container_of(timer_to_id
, struct sta_info
,
478 struct tid_ampdu_tx
*tid_tx
;
479 unsigned long timeout
;
482 tid_tx
= rcu_dereference(sta
->ampdu_mlme
.tid_tx
[*ptid
]);
483 if (!tid_tx
|| test_bit(HT_AGG_STATE_STOPPING
, &tid_tx
->state
)) {
488 timeout
= tid_tx
->last_tx
+ TU_TO_JIFFIES(tid_tx
->timeout
);
489 if (time_is_after_jiffies(timeout
)) {
490 mod_timer(&tid_tx
->session_timer
, timeout
);
497 ht_dbg(sta
->sdata
, "tx session timer expired on %pM tid %d\n",
498 sta
->sta
.addr
, (u16
)*ptid
);
500 ieee80211_stop_tx_ba_session(&sta
->sta
, *ptid
);
503 int ieee80211_start_tx_ba_session(struct ieee80211_sta
*pubsta
, u16 tid
,
506 struct sta_info
*sta
= container_of(pubsta
, struct sta_info
, sta
);
507 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
508 struct ieee80211_local
*local
= sdata
->local
;
509 struct tid_ampdu_tx
*tid_tx
;
512 if (WARN(sta
->reserved_tid
== tid
,
513 "Requested to start BA session on reserved tid=%d", tid
))
516 trace_api_start_tx_ba_session(pubsta
, tid
);
518 if (WARN_ON_ONCE(!local
->ops
->ampdu_action
))
521 if ((tid
>= IEEE80211_NUM_TIDS
) ||
522 !(local
->hw
.flags
& IEEE80211_HW_AMPDU_AGGREGATION
) ||
523 (local
->hw
.flags
& IEEE80211_HW_TX_AMPDU_SETUP_IN_HW
))
526 ht_dbg(sdata
, "Open BA session requested for %pM tid %u\n",
529 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
&&
530 sdata
->vif
.type
!= NL80211_IFTYPE_MESH_POINT
&&
531 sdata
->vif
.type
!= NL80211_IFTYPE_AP_VLAN
&&
532 sdata
->vif
.type
!= NL80211_IFTYPE_AP
&&
533 sdata
->vif
.type
!= NL80211_IFTYPE_ADHOC
)
536 if (test_sta_flag(sta
, WLAN_STA_BLOCK_BA
)) {
538 "BA sessions blocked - Denying BA session request %pM tid %d\n",
544 * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
545 * member of an IBSS, and has no other existing Block Ack agreement
546 * with the recipient STA, then the initiating STA shall transmit a
547 * Probe Request frame to the recipient STA and shall not transmit an
548 * ADDBA Request frame unless it receives a Probe Response frame
549 * from the recipient within dot11ADDBAFailureTimeout.
551 * The probe request mechanism for ADDBA is currently not implemented,
552 * but we only build up Block Ack session with HT STAs. This information
553 * is set when we receive a bss info from a probe response or a beacon.
555 if (sta
->sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
&&
556 !sta
->sta
.ht_cap
.ht_supported
) {
558 "BA request denied - IBSS STA %pM does not advertise HT support\n",
563 spin_lock_bh(&sta
->lock
);
565 /* we have tried too many times, receiver does not want A-MPDU */
566 if (sta
->ampdu_mlme
.addba_req_num
[tid
] > HT_AGG_MAX_RETRIES
) {
572 * if we have tried more than HT_AGG_BURST_RETRIES times we
573 * will spread our requests in time to avoid stalling connection
576 if (sta
->ampdu_mlme
.addba_req_num
[tid
] > HT_AGG_BURST_RETRIES
&&
577 time_before(jiffies
, sta
->ampdu_mlme
.last_addba_req_time
[tid
] +
578 HT_AGG_RETRIES_PERIOD
)) {
580 "BA request denied - waiting a grace period after %d failed requests on %pM tid %u\n",
581 sta
->ampdu_mlme
.addba_req_num
[tid
], sta
->sta
.addr
, tid
);
586 tid_tx
= rcu_dereference_protected_tid_tx(sta
, tid
);
587 /* check if the TID is not in aggregation flow already */
588 if (tid_tx
|| sta
->ampdu_mlme
.tid_start_tx
[tid
]) {
590 "BA request denied - session is not idle on %pM tid %u\n",
596 /* prepare A-MPDU MLME for Tx aggregation */
597 tid_tx
= kzalloc(sizeof(struct tid_ampdu_tx
), GFP_ATOMIC
);
603 skb_queue_head_init(&tid_tx
->pending
);
604 __set_bit(HT_AGG_STATE_WANT_START
, &tid_tx
->state
);
606 tid_tx
->timeout
= timeout
;
609 tid_tx
->addba_resp_timer
.function
= sta_addba_resp_timer_expired
;
610 tid_tx
->addba_resp_timer
.data
= (unsigned long)&sta
->timer_to_tid
[tid
];
611 init_timer(&tid_tx
->addba_resp_timer
);
614 tid_tx
->session_timer
.function
= sta_tx_agg_session_timer_expired
;
615 tid_tx
->session_timer
.data
= (unsigned long)&sta
->timer_to_tid
[tid
];
616 init_timer_deferrable(&tid_tx
->session_timer
);
618 /* assign a dialog token */
619 sta
->ampdu_mlme
.dialog_token_allocator
++;
620 tid_tx
->dialog_token
= sta
->ampdu_mlme
.dialog_token_allocator
;
623 * Finally, assign it to the start array; the work item will
624 * collect it and move it to the normal array.
626 sta
->ampdu_mlme
.tid_start_tx
[tid
] = tid_tx
;
628 ieee80211_queue_work(&local
->hw
, &sta
->ampdu_mlme
.work
);
630 /* this flow continues off the work */
632 spin_unlock_bh(&sta
->lock
);
635 EXPORT_SYMBOL(ieee80211_start_tx_ba_session
);
637 static void ieee80211_agg_tx_operational(struct ieee80211_local
*local
,
638 struct sta_info
*sta
, u16 tid
)
640 struct tid_ampdu_tx
*tid_tx
;
642 lockdep_assert_held(&sta
->ampdu_mlme
.mtx
);
644 tid_tx
= rcu_dereference_protected_tid_tx(sta
, tid
);
646 ht_dbg(sta
->sdata
, "Aggregation is on for %pM tid %d\n",
649 drv_ampdu_action(local
, sta
->sdata
,
650 IEEE80211_AMPDU_TX_OPERATIONAL
,
651 &sta
->sta
, tid
, NULL
, tid_tx
->buf_size
);
654 * synchronize with TX path, while splicing the TX path
655 * should block so it won't put more packets onto pending.
657 spin_lock_bh(&sta
->lock
);
659 ieee80211_agg_splice_packets(sta
->sdata
, tid_tx
, tid
);
661 * Now mark as operational. This will be visible
662 * in the TX path, and lets it go lock-free in
665 set_bit(HT_AGG_STATE_OPERATIONAL
, &tid_tx
->state
);
666 ieee80211_agg_splice_finish(sta
->sdata
, tid
);
668 spin_unlock_bh(&sta
->lock
);
671 void ieee80211_start_tx_ba_cb(struct ieee80211_vif
*vif
, u8
*ra
, u16 tid
)
673 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
674 struct ieee80211_local
*local
= sdata
->local
;
675 struct sta_info
*sta
;
676 struct tid_ampdu_tx
*tid_tx
;
678 trace_api_start_tx_ba_cb(sdata
, ra
, tid
);
680 if (tid
>= IEEE80211_NUM_TIDS
) {
681 ht_dbg(sdata
, "Bad TID value: tid = %d (>= %d)\n",
682 tid
, IEEE80211_NUM_TIDS
);
686 mutex_lock(&local
->sta_mtx
);
687 sta
= sta_info_get_bss(sdata
, ra
);
689 mutex_unlock(&local
->sta_mtx
);
690 ht_dbg(sdata
, "Could not find station: %pM\n", ra
);
694 mutex_lock(&sta
->ampdu_mlme
.mtx
);
695 tid_tx
= rcu_dereference_protected_tid_tx(sta
, tid
);
697 if (WARN_ON(!tid_tx
)) {
698 ht_dbg(sdata
, "addBA was not requested!\n");
702 if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY
, &tid_tx
->state
)))
705 if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED
, &tid_tx
->state
))
706 ieee80211_agg_tx_operational(local
, sta
, tid
);
709 mutex_unlock(&sta
->ampdu_mlme
.mtx
);
710 mutex_unlock(&local
->sta_mtx
);
713 void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif
*vif
,
714 const u8
*ra
, u16 tid
)
716 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
717 struct ieee80211_local
*local
= sdata
->local
;
718 struct ieee80211_ra_tid
*ra_tid
;
719 struct sk_buff
*skb
= dev_alloc_skb(0);
724 ra_tid
= (struct ieee80211_ra_tid
*) &skb
->cb
;
725 memcpy(&ra_tid
->ra
, ra
, ETH_ALEN
);
728 skb
->pkt_type
= IEEE80211_SDATA_QUEUE_AGG_START
;
729 skb_queue_tail(&sdata
->skb_queue
, skb
);
730 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
732 EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe
);
734 int __ieee80211_stop_tx_ba_session(struct sta_info
*sta
, u16 tid
,
735 enum ieee80211_agg_stop_reason reason
)
739 mutex_lock(&sta
->ampdu_mlme
.mtx
);
741 ret
= ___ieee80211_stop_tx_ba_session(sta
, tid
, reason
);
743 mutex_unlock(&sta
->ampdu_mlme
.mtx
);
748 int ieee80211_stop_tx_ba_session(struct ieee80211_sta
*pubsta
, u16 tid
)
750 struct sta_info
*sta
= container_of(pubsta
, struct sta_info
, sta
);
751 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
752 struct ieee80211_local
*local
= sdata
->local
;
753 struct tid_ampdu_tx
*tid_tx
;
756 trace_api_stop_tx_ba_session(pubsta
, tid
);
758 if (!local
->ops
->ampdu_action
)
761 if (tid
>= IEEE80211_NUM_TIDS
)
764 spin_lock_bh(&sta
->lock
);
765 tid_tx
= rcu_dereference_protected_tid_tx(sta
, tid
);
772 WARN(sta
->reserved_tid
== tid
,
773 "Requested to stop BA session on reserved tid=%d", tid
);
775 if (test_bit(HT_AGG_STATE_STOPPING
, &tid_tx
->state
)) {
776 /* already in progress stopping it */
781 set_bit(HT_AGG_STATE_WANT_STOP
, &tid_tx
->state
);
782 ieee80211_queue_work(&local
->hw
, &sta
->ampdu_mlme
.work
);
785 spin_unlock_bh(&sta
->lock
);
788 EXPORT_SYMBOL(ieee80211_stop_tx_ba_session
);
790 void ieee80211_stop_tx_ba_cb(struct ieee80211_vif
*vif
, u8
*ra
, u8 tid
)
792 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
793 struct ieee80211_local
*local
= sdata
->local
;
794 struct sta_info
*sta
;
795 struct tid_ampdu_tx
*tid_tx
;
797 trace_api_stop_tx_ba_cb(sdata
, ra
, tid
);
799 if (tid
>= IEEE80211_NUM_TIDS
) {
800 ht_dbg(sdata
, "Bad TID value: tid = %d (>= %d)\n",
801 tid
, IEEE80211_NUM_TIDS
);
805 ht_dbg(sdata
, "Stopping Tx BA session for %pM tid %d\n", ra
, tid
);
807 mutex_lock(&local
->sta_mtx
);
809 sta
= sta_info_get_bss(sdata
, ra
);
811 ht_dbg(sdata
, "Could not find station: %pM\n", ra
);
815 mutex_lock(&sta
->ampdu_mlme
.mtx
);
816 spin_lock_bh(&sta
->lock
);
817 tid_tx
= rcu_dereference_protected_tid_tx(sta
, tid
);
819 if (!tid_tx
|| !test_bit(HT_AGG_STATE_STOPPING
, &tid_tx
->state
)) {
821 "unexpected callback to A-MPDU stop for %pM tid %d\n",
826 if (tid_tx
->stop_initiator
== WLAN_BACK_INITIATOR
&& tid_tx
->tx_stop
)
827 ieee80211_send_delba(sta
->sdata
, ra
, tid
,
828 WLAN_BACK_INITIATOR
, WLAN_REASON_QSTA_NOT_USE
);
830 ieee80211_remove_tid_tx(sta
, tid
);
833 spin_unlock_bh(&sta
->lock
);
834 mutex_unlock(&sta
->ampdu_mlme
.mtx
);
836 mutex_unlock(&local
->sta_mtx
);
839 void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif
*vif
,
840 const u8
*ra
, u16 tid
)
842 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
843 struct ieee80211_local
*local
= sdata
->local
;
844 struct ieee80211_ra_tid
*ra_tid
;
845 struct sk_buff
*skb
= dev_alloc_skb(0);
850 ra_tid
= (struct ieee80211_ra_tid
*) &skb
->cb
;
851 memcpy(&ra_tid
->ra
, ra
, ETH_ALEN
);
854 skb
->pkt_type
= IEEE80211_SDATA_QUEUE_AGG_STOP
;
855 skb_queue_tail(&sdata
->skb_queue
, skb
);
856 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
858 EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe
);
861 void ieee80211_process_addba_resp(struct ieee80211_local
*local
,
862 struct sta_info
*sta
,
863 struct ieee80211_mgmt
*mgmt
,
866 struct tid_ampdu_tx
*tid_tx
;
870 capab
= le16_to_cpu(mgmt
->u
.action
.u
.addba_resp
.capab
);
871 tid
= (capab
& IEEE80211_ADDBA_PARAM_TID_MASK
) >> 2;
872 buf_size
= (capab
& IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK
) >> 6;
874 mutex_lock(&sta
->ampdu_mlme
.mtx
);
876 tid_tx
= rcu_dereference_protected_tid_tx(sta
, tid
);
880 if (mgmt
->u
.action
.u
.addba_resp
.dialog_token
!= tid_tx
->dialog_token
) {
881 ht_dbg(sta
->sdata
, "wrong addBA response token, %pM tid %d\n",
886 del_timer_sync(&tid_tx
->addba_resp_timer
);
888 ht_dbg(sta
->sdata
, "switched off addBA timer for %pM tid %d\n",
892 * addba_resp_timer may have fired before we got here, and
893 * caused WANT_STOP to be set. If the stop then was already
894 * processed further, STOPPING might be set.
896 if (test_bit(HT_AGG_STATE_WANT_STOP
, &tid_tx
->state
) ||
897 test_bit(HT_AGG_STATE_STOPPING
, &tid_tx
->state
)) {
899 "got addBA resp for %pM tid %d but we already gave up\n",
905 * IEEE 802.11-2007 7.3.1.14:
906 * In an ADDBA Response frame, when the Status Code field
907 * is set to 0, the Buffer Size subfield is set to a value
910 if (le16_to_cpu(mgmt
->u
.action
.u
.addba_resp
.status
)
911 == WLAN_STATUS_SUCCESS
&& buf_size
) {
912 if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED
,
914 /* ignore duplicate response */
918 tid_tx
->buf_size
= buf_size
;
920 if (test_bit(HT_AGG_STATE_DRV_READY
, &tid_tx
->state
))
921 ieee80211_agg_tx_operational(local
, sta
, tid
);
923 sta
->ampdu_mlme
.addba_req_num
[tid
] = 0;
925 if (tid_tx
->timeout
) {
926 mod_timer(&tid_tx
->session_timer
,
927 TU_TO_EXP_TIME(tid_tx
->timeout
));
928 tid_tx
->last_tx
= jiffies
;
932 ___ieee80211_stop_tx_ba_session(sta
, tid
, AGG_STOP_DECLINED
);
936 mutex_unlock(&sta
->ampdu_mlme
.mtx
);