drivers/input/touchscreen/mcs5000_ts.c

   1 /*
   2  * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
   3  *
   4  * Copyright (C) 2009 Samsung Electronics Co.Ltd
   5  * Author: Joonyoung Shim <jy0922.shim@samsung.com>
   6  *
   7  * Based on wm97xx-core.c
   8  *
   9  *  This program is free software; you can redistribute  it and/or modify it
  10  *  under  the terms of  the GNU General  Public License as published by the
  11  *  Free Software Foundation;  either version 2 of the  License, or (at your
  12  *  option) any later version.
  13  *
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/i2c.h>
  18 #include <linux/i2c/mcs.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/input.h>
  21 #include <linux/irq.h>
  22 #include <linux/slab.h>
  23
  24 /* Registers */
  25 #define MCS5000_TS_STATUS               0x00
  26 #define STATUS_OFFSET                   0
  27 #define STATUS_NO                       (0 << STATUS_OFFSET)
  28 #define STATUS_INIT                     (1 << STATUS_OFFSET)
  29 #define STATUS_SENSING                  (2 << STATUS_OFFSET)
  30 #define STATUS_COORD                    (3 << STATUS_OFFSET)
  31 #define STATUS_GESTURE                  (4 << STATUS_OFFSET)
  32 #define ERROR_OFFSET                    4
  33 #define ERROR_NO                        (0 << ERROR_OFFSET)
  34 #define ERROR_POWER_ON_RESET            (1 << ERROR_OFFSET)
  35 #define ERROR_INT_RESET                 (2 << ERROR_OFFSET)
  36 #define ERROR_EXT_RESET                 (3 << ERROR_OFFSET)
  37 #define ERROR_INVALID_REG_ADDRESS       (8 << ERROR_OFFSET)
  38 #define ERROR_INVALID_REG_VALUE         (9 << ERROR_OFFSET)
  39
  40 #define MCS5000_TS_OP_MODE              0x01
  41 #define RESET_OFFSET                    0
  42 #define RESET_NO                        (0 << RESET_OFFSET)
  43 #define RESET_EXT_SOFT                  (1 << RESET_OFFSET)
  44 #define OP_MODE_OFFSET                  1
  45 #define OP_MODE_SLEEP                   (0 << OP_MODE_OFFSET)
  46 #define OP_MODE_ACTIVE                  (1 << OP_MODE_OFFSET)
  47 #define GESTURE_OFFSET                  4
  48 #define GESTURE_DISABLE                 (0 << GESTURE_OFFSET)
  49 #define GESTURE_ENABLE                  (1 << GESTURE_OFFSET)
  50 #define PROXIMITY_OFFSET                5
  51 #define PROXIMITY_DISABLE               (0 << PROXIMITY_OFFSET)
  52 #define PROXIMITY_ENABLE                (1 << PROXIMITY_OFFSET)
  53 #define SCAN_MODE_OFFSET                6
  54 #define SCAN_MODE_INTERRUPT             (0 << SCAN_MODE_OFFSET)
  55 #define SCAN_MODE_POLLING               (1 << SCAN_MODE_OFFSET)
  56 #define REPORT_RATE_OFFSET              7
  57 #define REPORT_RATE_40                  (0 << REPORT_RATE_OFFSET)
  58 #define REPORT_RATE_80                  (1 << REPORT_RATE_OFFSET)
  59
  60 #define MCS5000_TS_SENS_CTL             0x02
  61 #define MCS5000_TS_FILTER_CTL           0x03
  62 #define PRI_FILTER_OFFSET               0
  63 #define SEC_FILTER_OFFSET               4
  64
  65 #define MCS5000_TS_X_SIZE_UPPER         0x08
  66 #define MCS5000_TS_X_SIZE_LOWER         0x09
  67 #define MCS5000_TS_Y_SIZE_UPPER         0x0A
  68 #define MCS5000_TS_Y_SIZE_LOWER         0x0B
  69
  70 #define MCS5000_TS_INPUT_INFO           0x10
  71 #define INPUT_TYPE_OFFSET               0
  72 #define INPUT_TYPE_NONTOUCH             (0 << INPUT_TYPE_OFFSET)
  73 #define INPUT_TYPE_SINGLE               (1 << INPUT_TYPE_OFFSET)
  74 #define INPUT_TYPE_DUAL                 (2 << INPUT_TYPE_OFFSET)
  75 #define INPUT_TYPE_PALM                 (3 << INPUT_TYPE_OFFSET)
  76 #define INPUT_TYPE_PROXIMITY            (7 << INPUT_TYPE_OFFSET)
  77 #define GESTURE_CODE_OFFSET             3
  78 #define GESTURE_CODE_NO                 (0 << GESTURE_CODE_OFFSET)
  79
  80 #define MCS5000_TS_X_POS_UPPER          0x11
  81 #define MCS5000_TS_X_POS_LOWER          0x12
  82 #define MCS5000_TS_Y_POS_UPPER          0x13
  83 #define MCS5000_TS_Y_POS_LOWER          0x14
  84 #define MCS5000_TS_Z_POS                0x15
  85 #define MCS5000_TS_WIDTH                0x16
  86 #define MCS5000_TS_GESTURE_VAL          0x17
  87 #define MCS5000_TS_MODULE_REV           0x20
  88 #define MCS5000_TS_FIRMWARE_VER         0x21
  89
  90 /* Touchscreen absolute values */
  91 #define MCS5000_MAX_XC                  0x3ff
  92 #define MCS5000_MAX_YC                  0x3ff
  93
  94 enum mcs5000_ts_read_offset {
  95         READ_INPUT_INFO,
  96         READ_X_POS_UPPER,
  97         READ_X_POS_LOWER,
  98         READ_Y_POS_UPPER,
  99         READ_Y_POS_LOWER,
 100         READ_BLOCK_SIZE,
 101 };
 102
 103 /* Each client has this additional data */
 104 struct mcs5000_ts_data {
 105         struct i2c_client *client;
 106         struct input_dev *input_dev;
 107         const struct mcs_platform_data *platform_data;
 108 };
 109
 110 static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
 111 {
 112         struct mcs5000_ts_data *data = dev_id;
 113         struct i2c_client *client = data->client;
 114         u8 buffer[READ_BLOCK_SIZE];
 115         int err;
 116         int x;
 117         int y;
 118
 119         err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
 120                         READ_BLOCK_SIZE, buffer);
 121         if (err < 0) {
 122                 dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
 123                 goto out;
 124         }
 125
 126         switch (buffer[READ_INPUT_INFO]) {
 127         case INPUT_TYPE_NONTOUCH:
 128                 input_report_key(data->input_dev, BTN_TOUCH, 0);
 129                 input_sync(data->input_dev);
 130                 break;
 131
 132         case INPUT_TYPE_SINGLE:
 133                 x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
 134                 y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
 135
 136                 input_report_key(data->input_dev, BTN_TOUCH, 1);
 137                 input_report_abs(data->input_dev, ABS_X, x);
 138                 input_report_abs(data->input_dev, ABS_Y, y);
 139                 input_sync(data->input_dev);
 140                 break;
 141
 142         case INPUT_TYPE_DUAL:
 143                 /* TODO */
 144                 break;
 145
 146         case INPUT_TYPE_PALM:
 147                 /* TODO */
 148                 break;
 149
 150         case INPUT_TYPE_PROXIMITY:
 151                 /* TODO */
 152                 break;
 153
 154         default:
 155                 dev_err(&client->dev, "Unknown ts input type %d\n",
 156                                 buffer[READ_INPUT_INFO]);
 157                 break;
 158         }
 159
 160  out:
 161         return IRQ_HANDLED;
 162 }
 163
 164 static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data,
 165                                  const struct mcs_platform_data *platform_data)
 166 {
 167         struct i2c_client *client = data->client;
 168
 169         /* Touch reset & sleep mode */
 170         i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
 171                         RESET_EXT_SOFT | OP_MODE_SLEEP);
 172
 173         /* Touch size */
 174         i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
 175                         platform_data->x_size >> 8);
 176         i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
 177                         platform_data->x_size & 0xff);
 178         i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
 179                         platform_data->y_size >> 8);
 180         i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
 181                         platform_data->y_size & 0xff);
 182
 183         /* Touch active mode & 80 report rate */
 184         i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
 185                         OP_MODE_ACTIVE | REPORT_RATE_80);
 186 }
 187
 188 static int mcs5000_ts_probe(struct i2c_client *client,
 189                             const struct i2c_device_id *id)
 190 {
 191         const struct mcs_platform_data *pdata;
 192         struct mcs5000_ts_data *data;
 193         struct input_dev *input_dev;
 194         int error;
 195
 196         pdata = dev_get_platdata(&client->dev);
 197         if (!pdata)
 198                 return -EINVAL;
 199
 200         data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 201         if (!data) {
 202                 dev_err(&client->dev, "Failed to allocate memory\n");
 203                 return -ENOMEM;
 204         }
 205
 206         data->client = client;
 207
 208         input_dev = devm_input_allocate_device(&client->dev);
 209         if (!input_dev) {
 210                 dev_err(&client->dev, "Failed to allocate input device\n");
 211                 return -ENOMEM;
 212         }
 213
 214         input_dev->name = "MELFAS MCS-5000 Touchscreen";
 215         input_dev->id.bustype = BUS_I2C;
 216         input_dev->dev.parent = &client->dev;
 217
 218         __set_bit(EV_ABS, input_dev->evbit);
 219         __set_bit(EV_KEY, input_dev->evbit);
 220         __set_bit(BTN_TOUCH, input_dev->keybit);
 221         input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
 222         input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
 223
 224         input_set_drvdata(input_dev, data);
 225         data->input_dev = input_dev;
 226
 227         if (pdata->cfg_pin)
 228                 pdata->cfg_pin();
 229
 230         error = devm_request_threaded_irq(&client->dev, client->irq,
 231                                           NULL, mcs5000_ts_interrupt,
 232                                           IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 233                                           "mcs5000_ts", data);
 234         if (error) {
 235                 dev_err(&client->dev, "Failed to register interrupt\n");
 236                 return error;
 237         }
 238
 239         error = input_register_device(data->input_dev);
 240         if (error) {
 241                 dev_err(&client->dev, "Failed to register input device\n");
 242                 return error;
 243         }
 244
 245         mcs5000_ts_phys_init(data, pdata);
 246         i2c_set_clientdata(client, data);
 247
 248         return 0;
 249 }
 250
 251 #ifdef CONFIG_PM
 252 static int mcs5000_ts_suspend(struct device *dev)
 253 {
 254         struct i2c_client *client = to_i2c_client(dev);
 255
 256         /* Touch sleep mode */
 257         i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
 258
 259         return 0;
 260 }
 261
 262 static int mcs5000_ts_resume(struct device *dev)
 263 {
 264         struct i2c_client *client = to_i2c_client(dev);
 265         struct mcs5000_ts_data *data = i2c_get_clientdata(client);
 266         const struct mcs_platform_data *pdata = dev_get_platdata(dev);
 267
 268         mcs5000_ts_phys_init(data, pdata);
 269
 270         return 0;
 271 }
 272 #endif
 273
 274 static SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, mcs5000_ts_suspend, mcs5000_ts_resume);
 275
 276 static const struct i2c_device_id mcs5000_ts_id[] = {
 277         { "mcs5000_ts", 0 },
 278         { }
 279 };
 280 MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
 281
 282 static struct i2c_driver mcs5000_ts_driver = {
 283         .probe          = mcs5000_ts_probe,
 284         .driver = {
 285                 .name = "mcs5000_ts",
 286                 .pm   = &mcs5000_ts_pm,
 287         },
 288         .id_table       = mcs5000_ts_id,
 289 };
 290
 291 module_i2c_driver(mcs5000_ts_driver);
 292
 293 /* Module information */
 294 MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
 295 MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
 296 MODULE_LICENSE("GPL");