sched: Remove double_rq_lock() from __migrate_task()
[linux/fpc-iii.git] / drivers / media / dvb-frontends / lgdt330x_priv.h
blob38c76695abfe0d19904c9c78b1283fcc5ff0d198
1 /*
2 * Support for LGDT3302 and LGDT3303 - VSB/QAM
4 * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 #ifndef _LGDT330X_PRIV_
23 #define _LGDT330X_PRIV_
25 /* i2c control register addresses */
26 enum I2C_REG {
27 TOP_CONTROL= 0x00,
28 IRQ_MASK= 0x01,
29 IRQ_STATUS= 0x02,
30 VSB_CARRIER_FREQ0= 0x16,
31 VSB_CARRIER_FREQ1= 0x17,
32 VSB_CARRIER_FREQ2= 0x18,
33 VSB_CARRIER_FREQ3= 0x19,
34 CARRIER_MSEQAM1= 0x1a,
35 CARRIER_MSEQAM2= 0x1b,
36 CARRIER_LOCK= 0x1c,
37 TIMING_RECOVERY= 0x1d,
38 AGC_DELAY0= 0x2a,
39 AGC_DELAY1= 0x2b,
40 AGC_DELAY2= 0x2c,
41 AGC_RF_BANDWIDTH0= 0x2d,
42 AGC_RF_BANDWIDTH1= 0x2e,
43 AGC_RF_BANDWIDTH2= 0x2f,
44 AGC_LOOP_BANDWIDTH0= 0x30,
45 AGC_LOOP_BANDWIDTH1= 0x31,
46 AGC_FUNC_CTRL1= 0x32,
47 AGC_FUNC_CTRL2= 0x33,
48 AGC_FUNC_CTRL3= 0x34,
49 AGC_RFIF_ACC0= 0x39,
50 AGC_RFIF_ACC1= 0x3a,
51 AGC_RFIF_ACC2= 0x3b,
52 AGC_STATUS= 0x3f,
53 SYNC_STATUS_VSB= 0x43,
54 DEMUX_CONTROL= 0x66,
55 LGDT3302_EQPH_ERR0= 0x47,
56 LGDT3302_EQ_ERR1= 0x48,
57 LGDT3302_EQ_ERR2= 0x49,
58 LGDT3302_PH_ERR1= 0x4a,
59 LGDT3302_PH_ERR2= 0x4b,
60 LGDT3302_PACKET_ERR_COUNTER1= 0x6a,
61 LGDT3302_PACKET_ERR_COUNTER2= 0x6b,
62 LGDT3303_EQPH_ERR0= 0x6e,
63 LGDT3303_EQ_ERR1= 0x6f,
64 LGDT3303_EQ_ERR2= 0x70,
65 LGDT3303_PH_ERR1= 0x71,
66 LGDT3303_PH_ERR2= 0x72,
67 LGDT3303_PACKET_ERR_COUNTER1= 0x8b,
68 LGDT3303_PACKET_ERR_COUNTER2= 0x8c,
71 #endif /* _LGDT330X_PRIV_ */
74 * Local variables:
75 * c-basic-offset: 8
76 * End: