2 * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
4 * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
5 * Copyright (C) 2009 Nuvoton PS Team
7 * Special thanks to Nuvoton for providing hardware, spec sheets and
8 * sample code upon which portions of this driver are based. Indirect
9 * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of the
15 * License, or (at your option) any later version.
17 * This program is distributed in the hope that it will be useful, but
18 * WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/pnp.h>
34 #include <linux/interrupt.h>
35 #include <linux/sched.h>
36 #include <linux/slab.h>
37 #include <media/rc-core.h>
38 #include <linux/pci_ids.h>
40 #include "nuvoton-cir.h"
42 /* write val to config reg */
43 static inline void nvt_cr_write(struct nvt_dev
*nvt
, u8 val
, u8 reg
)
45 outb(reg
, nvt
->cr_efir
);
46 outb(val
, nvt
->cr_efdr
);
49 /* read val from config reg */
50 static inline u8
nvt_cr_read(struct nvt_dev
*nvt
, u8 reg
)
52 outb(reg
, nvt
->cr_efir
);
53 return inb(nvt
->cr_efdr
);
56 /* update config register bit without changing other bits */
57 static inline void nvt_set_reg_bit(struct nvt_dev
*nvt
, u8 val
, u8 reg
)
59 u8 tmp
= nvt_cr_read(nvt
, reg
) | val
;
60 nvt_cr_write(nvt
, tmp
, reg
);
63 /* clear config register bit without changing other bits */
64 static inline void nvt_clear_reg_bit(struct nvt_dev
*nvt
, u8 val
, u8 reg
)
66 u8 tmp
= nvt_cr_read(nvt
, reg
) & ~val
;
67 nvt_cr_write(nvt
, tmp
, reg
);
70 /* enter extended function mode */
71 static inline void nvt_efm_enable(struct nvt_dev
*nvt
)
73 /* Enabling Extended Function Mode explicitly requires writing 2x */
74 outb(EFER_EFM_ENABLE
, nvt
->cr_efir
);
75 outb(EFER_EFM_ENABLE
, nvt
->cr_efir
);
78 /* exit extended function mode */
79 static inline void nvt_efm_disable(struct nvt_dev
*nvt
)
81 outb(EFER_EFM_DISABLE
, nvt
->cr_efir
);
85 * When you want to address a specific logical device, write its logical
86 * device number to CR_LOGICAL_DEV_SEL, then enable/disable by writing
87 * 0x1/0x0 respectively to CR_LOGICAL_DEV_EN.
89 static inline void nvt_select_logical_dev(struct nvt_dev
*nvt
, u8 ldev
)
91 outb(CR_LOGICAL_DEV_SEL
, nvt
->cr_efir
);
92 outb(ldev
, nvt
->cr_efdr
);
95 /* write val to cir config register */
96 static inline void nvt_cir_reg_write(struct nvt_dev
*nvt
, u8 val
, u8 offset
)
98 outb(val
, nvt
->cir_addr
+ offset
);
101 /* read val from cir config register */
102 static u8
nvt_cir_reg_read(struct nvt_dev
*nvt
, u8 offset
)
106 val
= inb(nvt
->cir_addr
+ offset
);
111 /* write val to cir wake register */
112 static inline void nvt_cir_wake_reg_write(struct nvt_dev
*nvt
,
115 outb(val
, nvt
->cir_wake_addr
+ offset
);
118 /* read val from cir wake config register */
119 static u8
nvt_cir_wake_reg_read(struct nvt_dev
*nvt
, u8 offset
)
123 val
= inb(nvt
->cir_wake_addr
+ offset
);
128 /* dump current cir register contents */
129 static void cir_dump_regs(struct nvt_dev
*nvt
)
132 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR
);
134 pr_info("%s: Dump CIR logical device registers:\n", NVT_DRIVER_NAME
);
135 pr_info(" * CR CIR ACTIVE : 0x%x\n",
136 nvt_cr_read(nvt
, CR_LOGICAL_DEV_EN
));
137 pr_info(" * CR CIR BASE ADDR: 0x%x\n",
138 (nvt_cr_read(nvt
, CR_CIR_BASE_ADDR_HI
) << 8) |
139 nvt_cr_read(nvt
, CR_CIR_BASE_ADDR_LO
));
140 pr_info(" * CR CIR IRQ NUM: 0x%x\n",
141 nvt_cr_read(nvt
, CR_CIR_IRQ_RSRC
));
143 nvt_efm_disable(nvt
);
145 pr_info("%s: Dump CIR registers:\n", NVT_DRIVER_NAME
);
146 pr_info(" * IRCON: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_IRCON
));
147 pr_info(" * IRSTS: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_IRSTS
));
148 pr_info(" * IREN: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_IREN
));
149 pr_info(" * RXFCONT: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_RXFCONT
));
150 pr_info(" * CP: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_CP
));
151 pr_info(" * CC: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_CC
));
152 pr_info(" * SLCH: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_SLCH
));
153 pr_info(" * SLCL: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_SLCL
));
154 pr_info(" * FIFOCON: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_FIFOCON
));
155 pr_info(" * IRFIFOSTS: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_IRFIFOSTS
));
156 pr_info(" * SRXFIFO: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_SRXFIFO
));
157 pr_info(" * TXFCONT: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_TXFCONT
));
158 pr_info(" * STXFIFO: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_STXFIFO
));
159 pr_info(" * FCCH: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_FCCH
));
160 pr_info(" * FCCL: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_FCCL
));
161 pr_info(" * IRFSM: 0x%x\n", nvt_cir_reg_read(nvt
, CIR_IRFSM
));
164 /* dump current cir wake register contents */
165 static void cir_wake_dump_regs(struct nvt_dev
*nvt
)
170 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR_WAKE
);
172 pr_info("%s: Dump CIR WAKE logical device registers:\n",
174 pr_info(" * CR CIR WAKE ACTIVE : 0x%x\n",
175 nvt_cr_read(nvt
, CR_LOGICAL_DEV_EN
));
176 pr_info(" * CR CIR WAKE BASE ADDR: 0x%x\n",
177 (nvt_cr_read(nvt
, CR_CIR_BASE_ADDR_HI
) << 8) |
178 nvt_cr_read(nvt
, CR_CIR_BASE_ADDR_LO
));
179 pr_info(" * CR CIR WAKE IRQ NUM: 0x%x\n",
180 nvt_cr_read(nvt
, CR_CIR_IRQ_RSRC
));
182 nvt_efm_disable(nvt
);
184 pr_info("%s: Dump CIR WAKE registers\n", NVT_DRIVER_NAME
);
185 pr_info(" * IRCON: 0x%x\n",
186 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_IRCON
));
187 pr_info(" * IRSTS: 0x%x\n",
188 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_IRSTS
));
189 pr_info(" * IREN: 0x%x\n",
190 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_IREN
));
191 pr_info(" * FIFO CMP DEEP: 0x%x\n",
192 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_FIFO_CMP_DEEP
));
193 pr_info(" * FIFO CMP TOL: 0x%x\n",
194 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_FIFO_CMP_TOL
));
195 pr_info(" * FIFO COUNT: 0x%x\n",
196 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_FIFO_COUNT
));
197 pr_info(" * SLCH: 0x%x\n",
198 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_SLCH
));
199 pr_info(" * SLCL: 0x%x\n",
200 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_SLCL
));
201 pr_info(" * FIFOCON: 0x%x\n",
202 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_FIFOCON
));
203 pr_info(" * SRXFSTS: 0x%x\n",
204 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_SRXFSTS
));
205 pr_info(" * SAMPLE RX FIFO: 0x%x\n",
206 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_SAMPLE_RX_FIFO
));
207 pr_info(" * WR FIFO DATA: 0x%x\n",
208 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_WR_FIFO_DATA
));
209 pr_info(" * RD FIFO ONLY: 0x%x\n",
210 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_RD_FIFO_ONLY
));
211 pr_info(" * RD FIFO ONLY IDX: 0x%x\n",
212 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_RD_FIFO_ONLY_IDX
));
213 pr_info(" * FIFO IGNORE: 0x%x\n",
214 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_FIFO_IGNORE
));
215 pr_info(" * IRFSM: 0x%x\n",
216 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_IRFSM
));
218 fifo_len
= nvt_cir_wake_reg_read(nvt
, CIR_WAKE_FIFO_COUNT
);
219 pr_info("%s: Dump CIR WAKE FIFO (len %d)\n", NVT_DRIVER_NAME
, fifo_len
);
220 pr_info("* Contents =");
221 for (i
= 0; i
< fifo_len
; i
++)
223 nvt_cir_wake_reg_read(nvt
, CIR_WAKE_RD_FIFO_ONLY
));
227 /* detect hardware features */
228 static int nvt_hw_detect(struct nvt_dev
*nvt
)
231 u8 chip_major
, chip_minor
;
234 bool chip_unknown
= false;
238 /* Check if we're wired for the alternate EFER setup */
239 chip_major
= nvt_cr_read(nvt
, CR_CHIP_ID_HI
);
240 if (chip_major
== 0xff) {
241 nvt
->cr_efir
= CR_EFIR2
;
242 nvt
->cr_efdr
= CR_EFDR2
;
244 chip_major
= nvt_cr_read(nvt
, CR_CHIP_ID_HI
);
247 chip_minor
= nvt_cr_read(nvt
, CR_CHIP_ID_LO
);
249 /* these are the known working chip revisions... */
250 switch (chip_major
) {
251 case CHIP_ID_HIGH_667
:
252 strcpy(chip_id
, "w83667hg\0");
253 if (chip_minor
!= CHIP_ID_LOW_667
)
256 case CHIP_ID_HIGH_677B
:
257 strcpy(chip_id
, "w83677hg\0");
258 if (chip_minor
!= CHIP_ID_LOW_677B2
&&
259 chip_minor
!= CHIP_ID_LOW_677B3
)
262 case CHIP_ID_HIGH_677C
:
263 strcpy(chip_id
, "w83677hg-c\0");
264 if (chip_minor
!= CHIP_ID_LOW_677C
)
268 strcpy(chip_id
, "w836x7hg\0");
273 /* warn, but still let the driver load, if we don't know this chip */
275 nvt_pr(KERN_WARNING
, "%s: unknown chip, id: 0x%02x 0x%02x, "
276 "it may not work...", chip_id
, chip_major
, chip_minor
);
278 nvt_dbg("%s: chip id: 0x%02x 0x%02x",
279 chip_id
, chip_major
, chip_minor
);
281 nvt_efm_disable(nvt
);
283 spin_lock_irqsave(&nvt
->nvt_lock
, flags
);
284 nvt
->chip_major
= chip_major
;
285 nvt
->chip_minor
= chip_minor
;
286 spin_unlock_irqrestore(&nvt
->nvt_lock
, flags
);
291 static void nvt_cir_ldev_init(struct nvt_dev
*nvt
)
293 u8 val
, psreg
, psmask
, psval
;
295 if (nvt
->chip_major
== CHIP_ID_HIGH_667
) {
296 psreg
= CR_MULTIFUNC_PIN_SEL
;
297 psmask
= MULTIFUNC_PIN_SEL_MASK
;
298 psval
= MULTIFUNC_ENABLE_CIR
| MULTIFUNC_ENABLE_CIRWB
;
300 psreg
= CR_OUTPUT_PIN_SEL
;
301 psmask
= OUTPUT_PIN_SEL_MASK
;
302 psval
= OUTPUT_ENABLE_CIR
| OUTPUT_ENABLE_CIRWB
;
305 /* output pin selection: enable CIR, with WB sensor enabled */
306 val
= nvt_cr_read(nvt
, psreg
);
309 nvt_cr_write(nvt
, val
, psreg
);
311 /* Select CIR logical device and enable */
312 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR
);
313 nvt_cr_write(nvt
, LOGICAL_DEV_ENABLE
, CR_LOGICAL_DEV_EN
);
315 nvt_cr_write(nvt
, nvt
->cir_addr
>> 8, CR_CIR_BASE_ADDR_HI
);
316 nvt_cr_write(nvt
, nvt
->cir_addr
& 0xff, CR_CIR_BASE_ADDR_LO
);
318 nvt_cr_write(nvt
, nvt
->cir_irq
, CR_CIR_IRQ_RSRC
);
320 nvt_dbg("CIR initialized, base io port address: 0x%lx, irq: %d",
321 nvt
->cir_addr
, nvt
->cir_irq
);
324 static void nvt_cir_wake_ldev_init(struct nvt_dev
*nvt
)
326 /* Select ACPI logical device, enable it and CIR Wake */
327 nvt_select_logical_dev(nvt
, LOGICAL_DEV_ACPI
);
328 nvt_cr_write(nvt
, LOGICAL_DEV_ENABLE
, CR_LOGICAL_DEV_EN
);
330 /* Enable CIR Wake via PSOUT# (Pin60) */
331 nvt_set_reg_bit(nvt
, CIR_WAKE_ENABLE_BIT
, CR_ACPI_CIR_WAKE
);
333 /* enable pme interrupt of cir wakeup event */
334 nvt_set_reg_bit(nvt
, PME_INTR_CIR_PASS_BIT
, CR_ACPI_IRQ_EVENTS2
);
336 /* Select CIR Wake logical device and enable */
337 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR_WAKE
);
338 nvt_cr_write(nvt
, LOGICAL_DEV_ENABLE
, CR_LOGICAL_DEV_EN
);
340 nvt_cr_write(nvt
, nvt
->cir_wake_addr
>> 8, CR_CIR_BASE_ADDR_HI
);
341 nvt_cr_write(nvt
, nvt
->cir_wake_addr
& 0xff, CR_CIR_BASE_ADDR_LO
);
343 nvt_cr_write(nvt
, nvt
->cir_wake_irq
, CR_CIR_IRQ_RSRC
);
345 nvt_dbg("CIR Wake initialized, base io port address: 0x%lx, irq: %d",
346 nvt
->cir_wake_addr
, nvt
->cir_wake_irq
);
349 /* clear out the hardware's cir rx fifo */
350 static void nvt_clear_cir_fifo(struct nvt_dev
*nvt
)
354 val
= nvt_cir_reg_read(nvt
, CIR_FIFOCON
);
355 nvt_cir_reg_write(nvt
, val
| CIR_FIFOCON_RXFIFOCLR
, CIR_FIFOCON
);
358 /* clear out the hardware's cir wake rx fifo */
359 static void nvt_clear_cir_wake_fifo(struct nvt_dev
*nvt
)
363 val
= nvt_cir_wake_reg_read(nvt
, CIR_WAKE_FIFOCON
);
364 nvt_cir_wake_reg_write(nvt
, val
| CIR_WAKE_FIFOCON_RXFIFOCLR
,
368 /* clear out the hardware's cir tx fifo */
369 static void nvt_clear_tx_fifo(struct nvt_dev
*nvt
)
373 val
= nvt_cir_reg_read(nvt
, CIR_FIFOCON
);
374 nvt_cir_reg_write(nvt
, val
| CIR_FIFOCON_TXFIFOCLR
, CIR_FIFOCON
);
377 /* enable RX Trigger Level Reach and Packet End interrupts */
378 static void nvt_set_cir_iren(struct nvt_dev
*nvt
)
382 iren
= CIR_IREN_RTR
| CIR_IREN_PE
;
383 nvt_cir_reg_write(nvt
, iren
, CIR_IREN
);
386 static void nvt_cir_regs_init(struct nvt_dev
*nvt
)
388 /* set sample limit count (PE interrupt raised when reached) */
389 nvt_cir_reg_write(nvt
, CIR_RX_LIMIT_COUNT
>> 8, CIR_SLCH
);
390 nvt_cir_reg_write(nvt
, CIR_RX_LIMIT_COUNT
& 0xff, CIR_SLCL
);
392 /* set fifo irq trigger levels */
393 nvt_cir_reg_write(nvt
, CIR_FIFOCON_TX_TRIGGER_LEV
|
394 CIR_FIFOCON_RX_TRIGGER_LEV
, CIR_FIFOCON
);
397 * Enable TX and RX, specify carrier on = low, off = high, and set
398 * sample period (currently 50us)
400 nvt_cir_reg_write(nvt
,
401 CIR_IRCON_TXEN
| CIR_IRCON_RXEN
|
402 CIR_IRCON_RXINV
| CIR_IRCON_SAMPLE_PERIOD_SEL
,
405 /* clear hardware rx and tx fifos */
406 nvt_clear_cir_fifo(nvt
);
407 nvt_clear_tx_fifo(nvt
);
409 /* clear any and all stray interrupts */
410 nvt_cir_reg_write(nvt
, 0xff, CIR_IRSTS
);
412 /* and finally, enable interrupts */
413 nvt_set_cir_iren(nvt
);
416 static void nvt_cir_wake_regs_init(struct nvt_dev
*nvt
)
418 /* set number of bytes needed for wake from s3 (default 65) */
419 nvt_cir_wake_reg_write(nvt
, CIR_WAKE_FIFO_CMP_BYTES
,
420 CIR_WAKE_FIFO_CMP_DEEP
);
422 /* set tolerance/variance allowed per byte during wake compare */
423 nvt_cir_wake_reg_write(nvt
, CIR_WAKE_CMP_TOLERANCE
,
424 CIR_WAKE_FIFO_CMP_TOL
);
426 /* set sample limit count (PE interrupt raised when reached) */
427 nvt_cir_wake_reg_write(nvt
, CIR_RX_LIMIT_COUNT
>> 8, CIR_WAKE_SLCH
);
428 nvt_cir_wake_reg_write(nvt
, CIR_RX_LIMIT_COUNT
& 0xff, CIR_WAKE_SLCL
);
430 /* set cir wake fifo rx trigger level (currently 67) */
431 nvt_cir_wake_reg_write(nvt
, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV
,
435 * Enable TX and RX, specific carrier on = low, off = high, and set
436 * sample period (currently 50us)
438 nvt_cir_wake_reg_write(nvt
, CIR_WAKE_IRCON_MODE0
| CIR_WAKE_IRCON_RXEN
|
439 CIR_WAKE_IRCON_R
| CIR_WAKE_IRCON_RXINV
|
440 CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL
,
443 /* clear cir wake rx fifo */
444 nvt_clear_cir_wake_fifo(nvt
);
446 /* clear any and all stray interrupts */
447 nvt_cir_wake_reg_write(nvt
, 0xff, CIR_WAKE_IRSTS
);
450 static void nvt_enable_wake(struct nvt_dev
*nvt
)
454 nvt_select_logical_dev(nvt
, LOGICAL_DEV_ACPI
);
455 nvt_set_reg_bit(nvt
, CIR_WAKE_ENABLE_BIT
, CR_ACPI_CIR_WAKE
);
456 nvt_set_reg_bit(nvt
, PME_INTR_CIR_PASS_BIT
, CR_ACPI_IRQ_EVENTS2
);
458 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR_WAKE
);
459 nvt_cr_write(nvt
, LOGICAL_DEV_ENABLE
, CR_LOGICAL_DEV_EN
);
461 nvt_efm_disable(nvt
);
463 nvt_cir_wake_reg_write(nvt
, CIR_WAKE_IRCON_MODE0
| CIR_WAKE_IRCON_RXEN
|
464 CIR_WAKE_IRCON_R
| CIR_WAKE_IRCON_RXINV
|
465 CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL
,
467 nvt_cir_wake_reg_write(nvt
, 0xff, CIR_WAKE_IRSTS
);
468 nvt_cir_wake_reg_write(nvt
, 0, CIR_WAKE_IREN
);
471 #if 0 /* Currently unused */
472 /* rx carrier detect only works in learning mode, must be called w/nvt_lock */
473 static u32
nvt_rx_carrier_detect(struct nvt_dev
*nvt
)
475 u32 count
, carrier
, duration
= 0;
478 count
= nvt_cir_reg_read(nvt
, CIR_FCCL
) |
479 nvt_cir_reg_read(nvt
, CIR_FCCH
) << 8;
481 for (i
= 0; i
< nvt
->pkts
; i
++) {
482 if (nvt
->buf
[i
] & BUF_PULSE_BIT
)
483 duration
+= nvt
->buf
[i
] & BUF_LEN_MASK
;
486 duration
*= SAMPLE_PERIOD
;
488 if (!count
|| !duration
) {
489 nvt_pr(KERN_NOTICE
, "Unable to determine carrier! (c:%u, d:%u)",
494 carrier
= MS_TO_NS(count
) / duration
;
496 if ((carrier
> MAX_CARRIER
) || (carrier
< MIN_CARRIER
))
497 nvt_dbg("WTF? Carrier frequency out of range!");
499 nvt_dbg("Carrier frequency: %u (count %u, duration %u)",
500 carrier
, count
, duration
);
506 * set carrier frequency
508 * set carrier on 2 registers: CP & CC
509 * always set CP as 0x81
510 * set CC by SPEC, CC = 3MHz/carrier - 1
512 static int nvt_set_tx_carrier(struct rc_dev
*dev
, u32 carrier
)
514 struct nvt_dev
*nvt
= dev
->priv
;
520 nvt_cir_reg_write(nvt
, 1, CIR_CP
);
521 val
= 3000000 / (carrier
) - 1;
522 nvt_cir_reg_write(nvt
, val
& 0xff, CIR_CC
);
524 nvt_dbg("cp: 0x%x cc: 0x%x\n",
525 nvt_cir_reg_read(nvt
, CIR_CP
), nvt_cir_reg_read(nvt
, CIR_CC
));
533 * 1) clean TX fifo first (handled by AP)
534 * 2) copy data from user space
535 * 3) disable RX interrupts, enable TX interrupts: TTR & TFU
536 * 4) send 9 packets to TX FIFO to open TTR
537 * in interrupt_handler:
538 * 5) send all data out
539 * go back to write():
540 * 6) disable TX interrupts, re-enable RX interupts
542 * The key problem of this function is user space data may larger than
543 * driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to
544 * buf, and keep current copied data buf num in cur_buf_num. But driver's buf
545 * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
546 * set TXFCONT as 0xff, until buf_count less than 0xff.
548 static int nvt_tx_ir(struct rc_dev
*dev
, unsigned *txbuf
, unsigned n
)
550 struct nvt_dev
*nvt
= dev
->priv
;
556 spin_lock_irqsave(&nvt
->tx
.lock
, flags
);
558 ret
= min((unsigned)(TX_BUF_LEN
/ sizeof(unsigned)), n
);
559 nvt
->tx
.buf_count
= (ret
* sizeof(unsigned));
561 memcpy(nvt
->tx
.buf
, txbuf
, nvt
->tx
.buf_count
);
563 nvt
->tx
.cur_buf_num
= 0;
565 /* save currently enabled interrupts */
566 iren
= nvt_cir_reg_read(nvt
, CIR_IREN
);
568 /* now disable all interrupts, save TFU & TTR */
569 nvt_cir_reg_write(nvt
, CIR_IREN_TFU
| CIR_IREN_TTR
, CIR_IREN
);
571 nvt
->tx
.tx_state
= ST_TX_REPLY
;
573 nvt_cir_reg_write(nvt
, CIR_FIFOCON_TX_TRIGGER_LEV_8
|
574 CIR_FIFOCON_RXFIFOCLR
, CIR_FIFOCON
);
576 /* trigger TTR interrupt by writing out ones, (yes, it's ugly) */
577 for (i
= 0; i
< 9; i
++)
578 nvt_cir_reg_write(nvt
, 0x01, CIR_STXFIFO
);
580 spin_unlock_irqrestore(&nvt
->tx
.lock
, flags
);
582 wait_event(nvt
->tx
.queue
, nvt
->tx
.tx_state
== ST_TX_REQUEST
);
584 spin_lock_irqsave(&nvt
->tx
.lock
, flags
);
585 nvt
->tx
.tx_state
= ST_TX_NONE
;
586 spin_unlock_irqrestore(&nvt
->tx
.lock
, flags
);
588 /* restore enabled interrupts to prior state */
589 nvt_cir_reg_write(nvt
, iren
, CIR_IREN
);
594 /* dump contents of the last rx buffer we got from the hw rx fifo */
595 static void nvt_dump_rx_buf(struct nvt_dev
*nvt
)
599 printk(KERN_DEBUG
"%s (len %d): ", __func__
, nvt
->pkts
);
600 for (i
= 0; (i
< nvt
->pkts
) && (i
< RX_BUF_LEN
); i
++)
601 printk(KERN_CONT
"0x%02x ", nvt
->buf
[i
]);
602 printk(KERN_CONT
"\n");
606 * Process raw data in rx driver buffer, store it in raw IR event kfifo,
607 * trigger decode when appropriate.
609 * We get IR data samples one byte at a time. If the msb is set, its a pulse,
610 * otherwise its a space. The lower 7 bits are the count of SAMPLE_PERIOD
611 * (default 50us) intervals for that pulse/space. A discrete signal is
612 * followed by a series of 0x7f packets, then either 0x7<something> or 0x80
613 * to signal more IR coming (repeats) or end of IR, respectively. We store
614 * sample data in the raw event kfifo until we see 0x7<something> (except f)
615 * or 0x80, at which time, we trigger a decode operation.
617 static void nvt_process_rx_ir_data(struct nvt_dev
*nvt
)
619 DEFINE_IR_RAW_EVENT(rawir
);
623 nvt_dbg_verbose("%s firing", __func__
);
626 nvt_dump_rx_buf(nvt
);
628 nvt_dbg_verbose("Processing buffer of len %d", nvt
->pkts
);
630 init_ir_raw_event(&rawir
);
632 for (i
= 0; i
< nvt
->pkts
; i
++) {
633 sample
= nvt
->buf
[i
];
635 rawir
.pulse
= ((sample
& BUF_PULSE_BIT
) != 0);
636 rawir
.duration
= US_TO_NS((sample
& BUF_LEN_MASK
)
639 nvt_dbg("Storing %s with duration %d",
640 rawir
.pulse
? "pulse" : "space", rawir
.duration
);
642 ir_raw_event_store_with_filter(nvt
->rdev
, &rawir
);
645 * BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE
646 * indicates end of IR signal, but new data incoming. In both
647 * cases, it means we're ready to call ir_raw_event_handle
649 if ((sample
== BUF_PULSE_BIT
) && (i
+ 1 < nvt
->pkts
)) {
650 nvt_dbg("Calling ir_raw_event_handle (signal end)\n");
651 ir_raw_event_handle(nvt
->rdev
);
657 nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n");
658 ir_raw_event_handle(nvt
->rdev
);
660 nvt_dbg_verbose("%s done", __func__
);
663 static void nvt_handle_rx_fifo_overrun(struct nvt_dev
*nvt
)
665 nvt_pr(KERN_WARNING
, "RX FIFO overrun detected, flushing data!");
668 nvt_clear_cir_fifo(nvt
);
669 ir_raw_event_reset(nvt
->rdev
);
672 /* copy data from hardware rx fifo into driver buffer */
673 static void nvt_get_rx_ir_data(struct nvt_dev
*nvt
)
678 bool overrun
= false;
681 /* Get count of how many bytes to read from RX FIFO */
682 fifocount
= nvt_cir_reg_read(nvt
, CIR_RXFCONT
);
683 /* if we get 0xff, probably means the logical dev is disabled */
684 if (fifocount
== 0xff)
686 /* watch out for a fifo overrun condition */
687 else if (fifocount
> RX_BUF_LEN
) {
689 fifocount
= RX_BUF_LEN
;
692 nvt_dbg("attempting to fetch %u bytes from hw rx fifo", fifocount
);
694 spin_lock_irqsave(&nvt
->nvt_lock
, flags
);
698 /* This should never happen, but lets check anyway... */
699 if (b_idx
+ fifocount
> RX_BUF_LEN
) {
700 nvt_process_rx_ir_data(nvt
);
704 /* Read fifocount bytes from CIR Sample RX FIFO register */
705 for (i
= 0; i
< fifocount
; i
++) {
706 val
= nvt_cir_reg_read(nvt
, CIR_SRXFIFO
);
707 nvt
->buf
[b_idx
+ i
] = val
;
710 nvt
->pkts
+= fifocount
;
711 nvt_dbg("%s: pkts now %d", __func__
, nvt
->pkts
);
713 nvt_process_rx_ir_data(nvt
);
716 nvt_handle_rx_fifo_overrun(nvt
);
718 spin_unlock_irqrestore(&nvt
->nvt_lock
, flags
);
721 static void nvt_cir_log_irqs(u8 status
, u8 iren
)
723 nvt_pr(KERN_INFO
, "IRQ 0x%02x (IREN 0x%02x) :%s%s%s%s%s%s%s%s%s",
725 status
& CIR_IRSTS_RDR
? " RDR" : "",
726 status
& CIR_IRSTS_RTR
? " RTR" : "",
727 status
& CIR_IRSTS_PE
? " PE" : "",
728 status
& CIR_IRSTS_RFO
? " RFO" : "",
729 status
& CIR_IRSTS_TE
? " TE" : "",
730 status
& CIR_IRSTS_TTR
? " TTR" : "",
731 status
& CIR_IRSTS_TFU
? " TFU" : "",
732 status
& CIR_IRSTS_GH
? " GH" : "",
733 status
& ~(CIR_IRSTS_RDR
| CIR_IRSTS_RTR
| CIR_IRSTS_PE
|
734 CIR_IRSTS_RFO
| CIR_IRSTS_TE
| CIR_IRSTS_TTR
|
735 CIR_IRSTS_TFU
| CIR_IRSTS_GH
) ? " ?" : "");
738 static bool nvt_cir_tx_inactive(struct nvt_dev
*nvt
)
744 spin_lock_irqsave(&nvt
->tx
.lock
, flags
);
745 tx_state
= nvt
->tx
.tx_state
;
746 spin_unlock_irqrestore(&nvt
->tx
.lock
, flags
);
748 tx_inactive
= (tx_state
== ST_TX_NONE
);
753 /* interrupt service routine for incoming and outgoing CIR data */
754 static irqreturn_t
nvt_cir_isr(int irq
, void *data
)
756 struct nvt_dev
*nvt
= data
;
757 u8 status
, iren
, cur_state
;
760 nvt_dbg_verbose("%s firing", __func__
);
763 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR
);
764 nvt_efm_disable(nvt
);
767 * Get IR Status register contents. Write 1 to ack/clear
769 * bit: reg name - description
770 * 7: CIR_IRSTS_RDR - RX Data Ready
771 * 6: CIR_IRSTS_RTR - RX FIFO Trigger Level Reach
772 * 5: CIR_IRSTS_PE - Packet End
773 * 4: CIR_IRSTS_RFO - RX FIFO Overrun (RDR will also be set)
774 * 3: CIR_IRSTS_TE - TX FIFO Empty
775 * 2: CIR_IRSTS_TTR - TX FIFO Trigger Level Reach
776 * 1: CIR_IRSTS_TFU - TX FIFO Underrun
777 * 0: CIR_IRSTS_GH - Min Length Detected
779 status
= nvt_cir_reg_read(nvt
, CIR_IRSTS
);
781 nvt_dbg_verbose("%s exiting, IRSTS 0x0", __func__
);
782 nvt_cir_reg_write(nvt
, 0xff, CIR_IRSTS
);
783 return IRQ_RETVAL(IRQ_NONE
);
786 /* ack/clear all irq flags we've got */
787 nvt_cir_reg_write(nvt
, status
, CIR_IRSTS
);
788 nvt_cir_reg_write(nvt
, 0, CIR_IRSTS
);
790 /* Interrupt may be shared with CIR Wake, bail if CIR not enabled */
791 iren
= nvt_cir_reg_read(nvt
, CIR_IREN
);
793 nvt_dbg_verbose("%s exiting, CIR not enabled", __func__
);
794 return IRQ_RETVAL(IRQ_NONE
);
798 nvt_cir_log_irqs(status
, iren
);
800 if (status
& CIR_IRSTS_RTR
) {
801 /* FIXME: add code for study/learn mode */
802 /* We only do rx if not tx'ing */
803 if (nvt_cir_tx_inactive(nvt
))
804 nvt_get_rx_ir_data(nvt
);
807 if (status
& CIR_IRSTS_PE
) {
808 if (nvt_cir_tx_inactive(nvt
))
809 nvt_get_rx_ir_data(nvt
);
811 spin_lock_irqsave(&nvt
->nvt_lock
, flags
);
813 cur_state
= nvt
->study_state
;
815 spin_unlock_irqrestore(&nvt
->nvt_lock
, flags
);
817 if (cur_state
== ST_STUDY_NONE
)
818 nvt_clear_cir_fifo(nvt
);
821 if (status
& CIR_IRSTS_TE
)
822 nvt_clear_tx_fifo(nvt
);
824 if (status
& CIR_IRSTS_TTR
) {
825 unsigned int pos
, count
;
828 spin_lock_irqsave(&nvt
->tx
.lock
, flags
);
830 pos
= nvt
->tx
.cur_buf_num
;
831 count
= nvt
->tx
.buf_count
;
833 /* Write data into the hardware tx fifo while pos < count */
835 nvt_cir_reg_write(nvt
, nvt
->tx
.buf
[pos
], CIR_STXFIFO
);
836 nvt
->tx
.cur_buf_num
++;
837 /* Disable TX FIFO Trigger Level Reach (TTR) interrupt */
839 tmp
= nvt_cir_reg_read(nvt
, CIR_IREN
);
840 nvt_cir_reg_write(nvt
, tmp
& ~CIR_IREN_TTR
, CIR_IREN
);
843 spin_unlock_irqrestore(&nvt
->tx
.lock
, flags
);
847 if (status
& CIR_IRSTS_TFU
) {
848 spin_lock_irqsave(&nvt
->tx
.lock
, flags
);
849 if (nvt
->tx
.tx_state
== ST_TX_REPLY
) {
850 nvt
->tx
.tx_state
= ST_TX_REQUEST
;
851 wake_up(&nvt
->tx
.queue
);
853 spin_unlock_irqrestore(&nvt
->tx
.lock
, flags
);
856 nvt_dbg_verbose("%s done", __func__
);
857 return IRQ_RETVAL(IRQ_HANDLED
);
860 /* Interrupt service routine for CIR Wake */
861 static irqreturn_t
nvt_cir_wake_isr(int irq
, void *data
)
863 u8 status
, iren
, val
;
864 struct nvt_dev
*nvt
= data
;
867 nvt_dbg_wake("%s firing", __func__
);
869 status
= nvt_cir_wake_reg_read(nvt
, CIR_WAKE_IRSTS
);
871 return IRQ_RETVAL(IRQ_NONE
);
873 if (status
& CIR_WAKE_IRSTS_IR_PENDING
)
874 nvt_clear_cir_wake_fifo(nvt
);
876 nvt_cir_wake_reg_write(nvt
, status
, CIR_WAKE_IRSTS
);
877 nvt_cir_wake_reg_write(nvt
, 0, CIR_WAKE_IRSTS
);
879 /* Interrupt may be shared with CIR, bail if Wake not enabled */
880 iren
= nvt_cir_wake_reg_read(nvt
, CIR_WAKE_IREN
);
882 nvt_dbg_wake("%s exiting, wake not enabled", __func__
);
883 return IRQ_RETVAL(IRQ_HANDLED
);
886 if ((status
& CIR_WAKE_IRSTS_PE
) &&
887 (nvt
->wake_state
== ST_WAKE_START
)) {
888 while (nvt_cir_wake_reg_read(nvt
, CIR_WAKE_RD_FIFO_ONLY_IDX
)) {
889 val
= nvt_cir_wake_reg_read(nvt
, CIR_WAKE_RD_FIFO_ONLY
);
890 nvt_dbg("setting wake up key: 0x%x", val
);
893 nvt_cir_wake_reg_write(nvt
, 0, CIR_WAKE_IREN
);
894 spin_lock_irqsave(&nvt
->nvt_lock
, flags
);
895 nvt
->wake_state
= ST_WAKE_FINISH
;
896 spin_unlock_irqrestore(&nvt
->nvt_lock
, flags
);
899 nvt_dbg_wake("%s done", __func__
);
900 return IRQ_RETVAL(IRQ_HANDLED
);
903 static void nvt_enable_cir(struct nvt_dev
*nvt
)
905 /* set function enable flags */
906 nvt_cir_reg_write(nvt
, CIR_IRCON_TXEN
| CIR_IRCON_RXEN
|
907 CIR_IRCON_RXINV
| CIR_IRCON_SAMPLE_PERIOD_SEL
,
912 /* enable the CIR logical device */
913 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR
);
914 nvt_cr_write(nvt
, LOGICAL_DEV_ENABLE
, CR_LOGICAL_DEV_EN
);
916 nvt_efm_disable(nvt
);
918 /* clear all pending interrupts */
919 nvt_cir_reg_write(nvt
, 0xff, CIR_IRSTS
);
921 /* enable interrupts */
922 nvt_set_cir_iren(nvt
);
925 static void nvt_disable_cir(struct nvt_dev
*nvt
)
927 /* disable CIR interrupts */
928 nvt_cir_reg_write(nvt
, 0, CIR_IREN
);
930 /* clear any and all pending interrupts */
931 nvt_cir_reg_write(nvt
, 0xff, CIR_IRSTS
);
933 /* clear all function enable flags */
934 nvt_cir_reg_write(nvt
, 0, CIR_IRCON
);
936 /* clear hardware rx and tx fifos */
937 nvt_clear_cir_fifo(nvt
);
938 nvt_clear_tx_fifo(nvt
);
942 /* disable the CIR logical device */
943 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR
);
944 nvt_cr_write(nvt
, LOGICAL_DEV_DISABLE
, CR_LOGICAL_DEV_EN
);
946 nvt_efm_disable(nvt
);
949 static int nvt_open(struct rc_dev
*dev
)
951 struct nvt_dev
*nvt
= dev
->priv
;
954 spin_lock_irqsave(&nvt
->nvt_lock
, flags
);
956 spin_unlock_irqrestore(&nvt
->nvt_lock
, flags
);
961 static void nvt_close(struct rc_dev
*dev
)
963 struct nvt_dev
*nvt
= dev
->priv
;
966 spin_lock_irqsave(&nvt
->nvt_lock
, flags
);
967 nvt_disable_cir(nvt
);
968 spin_unlock_irqrestore(&nvt
->nvt_lock
, flags
);
971 /* Allocate memory, probe hardware, and initialize everything */
972 static int nvt_probe(struct pnp_dev
*pdev
, const struct pnp_device_id
*dev_id
)
978 nvt
= kzalloc(sizeof(struct nvt_dev
), GFP_KERNEL
);
982 /* input device for IR remote (and tx) */
983 rdev
= rc_allocate_device();
985 goto exit_free_dev_rdev
;
988 /* activate pnp device */
989 if (pnp_activate_dev(pdev
) < 0) {
990 dev_err(&pdev
->dev
, "Could not activate PNP device!\n");
991 goto exit_free_dev_rdev
;
994 /* validate pnp resources */
995 if (!pnp_port_valid(pdev
, 0) ||
996 pnp_port_len(pdev
, 0) < CIR_IOREG_LENGTH
) {
997 dev_err(&pdev
->dev
, "IR PNP Port not valid!\n");
998 goto exit_free_dev_rdev
;
1001 if (!pnp_irq_valid(pdev
, 0)) {
1002 dev_err(&pdev
->dev
, "PNP IRQ not valid!\n");
1003 goto exit_free_dev_rdev
;
1006 if (!pnp_port_valid(pdev
, 1) ||
1007 pnp_port_len(pdev
, 1) < CIR_IOREG_LENGTH
) {
1008 dev_err(&pdev
->dev
, "Wake PNP Port not valid!\n");
1009 goto exit_free_dev_rdev
;
1012 nvt
->cir_addr
= pnp_port_start(pdev
, 0);
1013 nvt
->cir_irq
= pnp_irq(pdev
, 0);
1015 nvt
->cir_wake_addr
= pnp_port_start(pdev
, 1);
1016 /* irq is always shared between cir and cir wake */
1017 nvt
->cir_wake_irq
= nvt
->cir_irq
;
1019 nvt
->cr_efir
= CR_EFIR
;
1020 nvt
->cr_efdr
= CR_EFDR
;
1022 spin_lock_init(&nvt
->nvt_lock
);
1023 spin_lock_init(&nvt
->tx
.lock
);
1025 pnp_set_drvdata(pdev
, nvt
);
1028 init_waitqueue_head(&nvt
->tx
.queue
);
1030 ret
= nvt_hw_detect(nvt
);
1032 goto exit_free_dev_rdev
;
1034 /* Initialize CIR & CIR Wake Logical Devices */
1035 nvt_efm_enable(nvt
);
1036 nvt_cir_ldev_init(nvt
);
1037 nvt_cir_wake_ldev_init(nvt
);
1038 nvt_efm_disable(nvt
);
1040 /* Initialize CIR & CIR Wake Config Registers */
1041 nvt_cir_regs_init(nvt
);
1042 nvt_cir_wake_regs_init(nvt
);
1044 /* Set up the rc device */
1046 rdev
->driver_type
= RC_DRIVER_IR_RAW
;
1047 rc_set_allowed_protocols(rdev
, RC_BIT_ALL
);
1048 rdev
->open
= nvt_open
;
1049 rdev
->close
= nvt_close
;
1050 rdev
->tx_ir
= nvt_tx_ir
;
1051 rdev
->s_tx_carrier
= nvt_set_tx_carrier
;
1052 rdev
->input_name
= "Nuvoton w836x7hg Infrared Remote Transceiver";
1053 rdev
->input_phys
= "nuvoton/cir0";
1054 rdev
->input_id
.bustype
= BUS_HOST
;
1055 rdev
->input_id
.vendor
= PCI_VENDOR_ID_WINBOND2
;
1056 rdev
->input_id
.product
= nvt
->chip_major
;
1057 rdev
->input_id
.version
= nvt
->chip_minor
;
1058 rdev
->dev
.parent
= &pdev
->dev
;
1059 rdev
->driver_name
= NVT_DRIVER_NAME
;
1060 rdev
->map_name
= RC_MAP_RC6_MCE
;
1061 rdev
->timeout
= MS_TO_NS(100);
1062 /* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
1063 rdev
->rx_resolution
= US_TO_NS(CIR_SAMPLE_PERIOD
);
1065 rdev
->min_timeout
= XYZ
;
1066 rdev
->max_timeout
= XYZ
;
1068 rdev
->tx_resolution
= XYZ
;
1072 ret
= rc_register_device(rdev
);
1074 goto exit_free_dev_rdev
;
1077 /* now claim resources */
1078 if (!request_region(nvt
->cir_addr
,
1079 CIR_IOREG_LENGTH
, NVT_DRIVER_NAME
))
1080 goto exit_unregister_device
;
1082 if (request_irq(nvt
->cir_irq
, nvt_cir_isr
, IRQF_SHARED
,
1083 NVT_DRIVER_NAME
, (void *)nvt
))
1084 goto exit_release_cir_addr
;
1086 if (!request_region(nvt
->cir_wake_addr
,
1087 CIR_IOREG_LENGTH
, NVT_DRIVER_NAME
))
1090 if (request_irq(nvt
->cir_wake_irq
, nvt_cir_wake_isr
, IRQF_SHARED
,
1091 NVT_DRIVER_NAME
, (void *)nvt
))
1092 goto exit_release_cir_wake_addr
;
1094 device_init_wakeup(&pdev
->dev
, true);
1096 nvt_pr(KERN_NOTICE
, "driver has been successfully loaded\n");
1099 cir_wake_dump_regs(nvt
);
1104 exit_release_cir_wake_addr
:
1105 release_region(nvt
->cir_wake_addr
, CIR_IOREG_LENGTH
);
1107 free_irq(nvt
->cir_irq
, nvt
);
1108 exit_release_cir_addr
:
1109 release_region(nvt
->cir_addr
, CIR_IOREG_LENGTH
);
1110 exit_unregister_device
:
1111 rc_unregister_device(rdev
);
1114 rc_free_device(rdev
);
1120 static void nvt_remove(struct pnp_dev
*pdev
)
1122 struct nvt_dev
*nvt
= pnp_get_drvdata(pdev
);
1123 unsigned long flags
;
1125 spin_lock_irqsave(&nvt
->nvt_lock
, flags
);
1127 nvt_cir_reg_write(nvt
, 0, CIR_IREN
);
1128 nvt_disable_cir(nvt
);
1129 /* enable CIR Wake (for IR power-on) */
1130 nvt_enable_wake(nvt
);
1131 spin_unlock_irqrestore(&nvt
->nvt_lock
, flags
);
1133 /* free resources */
1134 free_irq(nvt
->cir_irq
, nvt
);
1135 free_irq(nvt
->cir_wake_irq
, nvt
);
1136 release_region(nvt
->cir_addr
, CIR_IOREG_LENGTH
);
1137 release_region(nvt
->cir_wake_addr
, CIR_IOREG_LENGTH
);
1139 rc_unregister_device(nvt
->rdev
);
1144 static int nvt_suspend(struct pnp_dev
*pdev
, pm_message_t state
)
1146 struct nvt_dev
*nvt
= pnp_get_drvdata(pdev
);
1147 unsigned long flags
;
1149 nvt_dbg("%s called", __func__
);
1151 /* zero out misc state tracking */
1152 spin_lock_irqsave(&nvt
->nvt_lock
, flags
);
1153 nvt
->study_state
= ST_STUDY_NONE
;
1154 nvt
->wake_state
= ST_WAKE_NONE
;
1155 spin_unlock_irqrestore(&nvt
->nvt_lock
, flags
);
1157 spin_lock_irqsave(&nvt
->tx
.lock
, flags
);
1158 nvt
->tx
.tx_state
= ST_TX_NONE
;
1159 spin_unlock_irqrestore(&nvt
->tx
.lock
, flags
);
1161 /* disable all CIR interrupts */
1162 nvt_cir_reg_write(nvt
, 0, CIR_IREN
);
1164 nvt_efm_enable(nvt
);
1166 /* disable cir logical dev */
1167 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR
);
1168 nvt_cr_write(nvt
, LOGICAL_DEV_DISABLE
, CR_LOGICAL_DEV_EN
);
1170 nvt_efm_disable(nvt
);
1172 /* make sure wake is enabled */
1173 nvt_enable_wake(nvt
);
1178 static int nvt_resume(struct pnp_dev
*pdev
)
1181 struct nvt_dev
*nvt
= pnp_get_drvdata(pdev
);
1183 nvt_dbg("%s called", __func__
);
1185 /* open interrupt */
1186 nvt_set_cir_iren(nvt
);
1188 /* Enable CIR logical device */
1189 nvt_efm_enable(nvt
);
1190 nvt_select_logical_dev(nvt
, LOGICAL_DEV_CIR
);
1191 nvt_cr_write(nvt
, LOGICAL_DEV_ENABLE
, CR_LOGICAL_DEV_EN
);
1193 nvt_efm_disable(nvt
);
1195 nvt_cir_regs_init(nvt
);
1196 nvt_cir_wake_regs_init(nvt
);
1201 static void nvt_shutdown(struct pnp_dev
*pdev
)
1203 struct nvt_dev
*nvt
= pnp_get_drvdata(pdev
);
1204 nvt_enable_wake(nvt
);
1207 static const struct pnp_device_id nvt_ids
[] = {
1208 { "WEC0530", 0 }, /* CIR */
1209 { "NTN0530", 0 }, /* CIR for new chip's pnp id*/
1213 static struct pnp_driver nvt_driver
= {
1214 .name
= NVT_DRIVER_NAME
,
1215 .id_table
= nvt_ids
,
1216 .flags
= PNP_DRIVER_RES_DO_NOT_CHANGE
,
1218 .remove
= nvt_remove
,
1219 .suspend
= nvt_suspend
,
1220 .resume
= nvt_resume
,
1221 .shutdown
= nvt_shutdown
,
1224 static int nvt_init(void)
1226 return pnp_register_driver(&nvt_driver
);
1229 static void nvt_exit(void)
1231 pnp_unregister_driver(&nvt_driver
);
1234 module_param(debug
, int, S_IRUGO
| S_IWUSR
);
1235 MODULE_PARM_DESC(debug
, "Enable debugging output");
1237 MODULE_DEVICE_TABLE(pnp
, nvt_ids
);
1238 MODULE_DESCRIPTION("Nuvoton W83667HG-A & W83677HG-I CIR driver");
1240 MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
1241 MODULE_LICENSE("GPL");
1243 module_init(nvt_init
);
1244 module_exit(nvt_exit
);