drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c

   1 /*
   2  *  mxl111sf-phy.c - driver for the MaxLinear MXL111SF
   3  *
   4  *  Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *  GNU General Public License for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License
  17  *  along with this program; if not, write to the Free Software
  18  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19  */
  20
  21 #include "mxl111sf-phy.h"
  22 #include "mxl111sf-reg.h"
  23
  24 int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
  25 {
  26         struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
  27                 {0x07, 0xff, 0x0c},
  28                 {0x58, 0xff, 0x9d},
  29                 {0x09, 0xff, 0x00},
  30                 {0x06, 0xff, 0x06},
  31                 {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
  32                 {0x8d, 0x01, 0x01}, /* NEGATE_Q */
  33                 {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
  34                 {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
  35                 {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
  36                 {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
  37                 {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
  38                 {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
  39                 {0x88, 0xff, 0xf0}, /* INF_THD = 240 */
  40                 {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
  41                 {0x00, 0xff, 0x01}, /* Change to page 1 */
  42                 {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
  43                 {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
  44                 {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
  45                 {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
  46                 {0x00, 0xff, 0x00}, /* Change to page 0 */
  47                 {0,    0,    0}
  48         };
  49
  50         mxl_debug("()");
  51
  52         return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
  53 }
  54
  55 int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
  56 {
  57         int ret;
  58         mxl_debug("()");
  59
  60         ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
  61         if (mxl_fail(ret))
  62                 goto fail;
  63         ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
  64         mxl_fail(ret);
  65 fail:
  66         return ret;
  67 }
  68
  69 int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
  70 {
  71         int ret;
  72
  73         mxl_debug("(%s)", MXL_SOC_MODE == mode ?
  74                 "MXL_SOC_MODE" : "MXL_TUNER_MODE");
  75
  76         /* set device mode */
  77         ret = mxl111sf_write_reg(state, 0x03,
  78                                  MXL_SOC_MODE == mode ? 0x01 : 0x00);
  79         if (mxl_fail(ret))
  80                 goto fail;
  81
  82         ret = mxl111sf_write_reg_mask(state,
  83                                       0x7d, 0x40, MXL_SOC_MODE == mode ?
  84                                       0x00 : /* enable impulse noise filter,
  85                                                 INF_BYP = 0 */
  86                                       0x40); /* disable impulse noise filter,
  87                                                 INF_BYP = 1 */
  88         if (mxl_fail(ret))
  89                 goto fail;
  90
  91         state->device_mode = mode;
  92 fail:
  93         return ret;
  94 }
  95
  96 /* power up tuner */
  97 int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
  98 {
  99         mxl_debug("(%d)", onoff);
 100
 101         return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
 102 }
 103
 104 int mxl111sf_disable_656_port(struct mxl111sf_state *state)
 105 {
 106         mxl_debug("()");
 107
 108         return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
 109 }
 110
 111 int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
 112 {
 113         mxl_debug("()");
 114
 115         return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
 116 }
 117
 118 /* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
 119 int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
 120                             unsigned int parallel_serial,
 121                             unsigned int msb_lsb_1st,
 122                             unsigned int clock_phase,
 123                             unsigned int mpeg_valid_pol,
 124                             unsigned int mpeg_sync_pol)
 125 {
 126         int ret;
 127         u8 mode, tmp;
 128
 129         mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
 130                   clock_phase, mpeg_valid_pol, mpeg_sync_pol);
 131
 132         /* Enable PIN MUX */
 133         ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
 134         mxl_fail(ret);
 135
 136         /* Configure MPEG Clock phase */
 137         mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
 138
 139         if (clock_phase == TSIF_NORMAL)
 140                 mode &= ~V6_INVERTED_CLK_PHASE;
 141         else
 142                 mode |= V6_INVERTED_CLK_PHASE;
 143
 144         ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
 145         mxl_fail(ret);
 146
 147         /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
 148          * Get current configuration */
 149         ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
 150         mxl_fail(ret);
 151
 152         /* Data Input mode */
 153         if (parallel_serial == TSIF_INPUT_PARALLEL) {
 154                 /* Disable serial mode */
 155                 mode &= ~V6_MPEG_IN_DATA_SERIAL;
 156
 157                 /* Enable Parallel mode */
 158                 mode |= V6_MPEG_IN_DATA_PARALLEL;
 159         } else {
 160                 /* Disable Parallel mode */
 161                 mode &= ~V6_MPEG_IN_DATA_PARALLEL;
 162
 163                 /* Enable Serial Mode */
 164                 mode |= V6_MPEG_IN_DATA_SERIAL;
 165
 166                 /* If serial interface is chosen, configure
 167                    MSB or LSB order in transmission */
 168                 ret = mxl111sf_read_reg(state,
 169                                         V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
 170                                         &tmp);
 171                 mxl_fail(ret);
 172
 173                 if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
 174                         tmp |= V6_MPEG_SER_MSB_FIRST;
 175                 else
 176                         tmp &= ~V6_MPEG_SER_MSB_FIRST;
 177
 178                 ret = mxl111sf_write_reg(state,
 179                                          V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
 180                                          tmp);
 181                 mxl_fail(ret);
 182         }
 183
 184         /* MPEG Sync polarity */
 185         if (mpeg_sync_pol == TSIF_NORMAL)
 186                 mode &= ~V6_INVERTED_MPEG_SYNC;
 187         else
 188                 mode |= V6_INVERTED_MPEG_SYNC;
 189
 190         /* MPEG Valid polarity */
 191         if (mpeg_valid_pol == 0)
 192                 mode &= ~V6_INVERTED_MPEG_VALID;
 193         else
 194                 mode |= V6_INVERTED_MPEG_VALID;
 195
 196         ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
 197         mxl_fail(ret);
 198
 199         return ret;
 200 }
 201
 202 int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
 203 {
 204         static struct mxl111sf_reg_ctrl_info init_i2s[] = {
 205                 {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
 206                 {0x15, 0x60, 0x60}, /* Enable I2S */
 207                 {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
 208                                        Inverted 656 Clock, I2S_SOFT_RESET,
 209                                        0 : Normal operation, 1 : Reset State */
 210 #if 0
 211                 {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
 212 #endif
 213                 {0x00, 0xff, 0x02}, /* Change to Control Page */
 214                 {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
 215                 {0x00, 0xff, 0x00},
 216                 {0,    0,    0}
 217         };
 218         int ret;
 219
 220         mxl_debug("(0x%02x)", sample_size);
 221
 222         ret = mxl111sf_ctrl_program_regs(state, init_i2s);
 223         if (mxl_fail(ret))
 224                 goto fail;
 225
 226         ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
 227         mxl_fail(ret);
 228 fail:
 229         return ret;
 230 }
 231
 232 int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
 233 {
 234         static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
 235                 {0x15, 0x40, 0x00},
 236                 {0,    0,    0}
 237         };
 238
 239         mxl_debug("()");
 240
 241         return mxl111sf_ctrl_program_regs(state, disable_i2s);
 242 }
 243
 244 int mxl111sf_config_i2s(struct mxl111sf_state *state,
 245                         u8 msb_start_pos, u8 data_width)
 246 {
 247         int ret;
 248         u8 tmp;
 249
 250         mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
 251
 252         ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
 253         if (mxl_fail(ret))
 254                 goto fail;
 255
 256         tmp &= 0xe0;
 257         tmp |= msb_start_pos;
 258         ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
 259         if (mxl_fail(ret))
 260                 goto fail;
 261
 262         ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
 263         if (mxl_fail(ret))
 264                 goto fail;
 265
 266         tmp &= 0xe0;
 267         tmp |= data_width;
 268         ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
 269         mxl_fail(ret);
 270 fail:
 271         return ret;
 272 }
 273
 274 int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
 275 {
 276         u8 val;
 277         int ret;
 278
 279         mxl_debug("(%d)", onoff);
 280
 281         ret = mxl111sf_write_reg(state, 0x00, 0x02);
 282         if (mxl_fail(ret))
 283                 goto fail;
 284
 285         ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
 286         if (mxl_fail(ret))
 287                 goto fail;
 288
 289         if (onoff)
 290                 val |= 0x04;
 291         else
 292                 val &= ~0x04;
 293
 294         ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
 295         if (mxl_fail(ret))
 296                 goto fail;
 297
 298         ret = mxl111sf_write_reg(state, 0x00, 0x00);
 299         mxl_fail(ret);
 300 fail:
 301         return ret;
 302 }
 303
 304 int mxl111sf_idac_config(struct mxl111sf_state *state,
 305                          u8 control_mode, u8 current_setting,
 306                          u8 current_value, u8 hysteresis_value)
 307 {
 308         int ret;
 309         u8 val;
 310         /* current value will be set for both automatic & manual IDAC control */
 311         val = current_value;
 312
 313         if (control_mode == IDAC_MANUAL_CONTROL) {
 314                 /* enable manual control of IDAC */
 315                 val |= IDAC_MANUAL_CONTROL_BIT_MASK;
 316
 317                 if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
 318                         /* enable current sinking in manual mode */
 319                         val |= IDAC_CURRENT_SINKING_BIT_MASK;
 320                 else
 321                         /* disable current sinking in manual mode */
 322                         val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
 323         } else {
 324                 /* disable manual control of IDAC */
 325                 val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
 326
 327                 /* set hysteresis value  reg: 0x0B<5:0> */
 328                 ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
 329                                          (hysteresis_value & 0x3F));
 330                 mxl_fail(ret);
 331         }
 332
 333         ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
 334         mxl_fail(ret);
 335
 336         return ret;
 337 }
 338
 339 /*
 340  * Local variables:
 341  * c-basic-offset: 8
 342  * End:
 343  */