sched: Remove double_rq_lock() from __migrate_task()
[linux/fpc-iii.git] / drivers / media / usb / dvb-usb / gp8psk.h
blobed32b9da484364d8f49e94f4c29342149ef563da
1 /* DVB USB compliant Linux driver for the
2 * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
4 * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
5 * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
7 * Thanks to GENPIX for the sample code used to implement this module.
9 * This module is based off the vp7045 and vp702x modules
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the Free
13 * Software Foundation, version 2.
15 * see Documentation/dvb/README.dvb-usb for more information
17 #ifndef _DVB_USB_GP8PSK_H_
18 #define _DVB_USB_GP8PSK_H_
20 #define DVB_USB_LOG_PREFIX "gp8psk"
21 #include "dvb-usb.h"
23 extern int dvb_usb_gp8psk_debug;
24 #define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args)
25 #define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
26 #define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args)
27 #define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args)
29 /* Twinhan Vendor requests */
30 #define TH_COMMAND_IN 0xC0
31 #define TH_COMMAND_OUT 0xC1
33 /* gp8psk commands */
35 #define GET_8PSK_CONFIG 0x80 /* in */
36 #define SET_8PSK_CONFIG 0x81
37 #define I2C_WRITE 0x83
38 #define I2C_READ 0x84
39 #define ARM_TRANSFER 0x85
40 #define TUNE_8PSK 0x86
41 #define GET_SIGNAL_STRENGTH 0x87 /* in */
42 #define LOAD_BCM4500 0x88
43 #define BOOT_8PSK 0x89 /* in */
44 #define START_INTERSIL 0x8A /* in */
45 #define SET_LNB_VOLTAGE 0x8B
46 #define SET_22KHZ_TONE 0x8C
47 #define SEND_DISEQC_COMMAND 0x8D
48 #define SET_DVB_MODE 0x8E
49 #define SET_DN_SWITCH 0x8F
50 #define GET_SIGNAL_LOCK 0x90 /* in */
51 #define GET_FW_VERS 0x92
52 #define GET_SERIAL_NUMBER 0x93 /* in */
53 #define USE_EXTRA_VOLT 0x94
54 #define GET_FPGA_VERS 0x95
55 #define CW3K_INIT 0x9d
57 /* PSK_configuration bits */
58 #define bm8pskStarted 0x01
59 #define bm8pskFW_Loaded 0x02
60 #define bmIntersilOn 0x04
61 #define bmDVBmode 0x08
62 #define bm22kHz 0x10
63 #define bmSEL18V 0x20
64 #define bmDCtuned 0x40
65 #define bmArmed 0x80
67 /* Satellite modulation modes */
68 #define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */
69 #define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */
70 #define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */
71 #define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */
73 #define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */
74 #define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */
75 #define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */
76 #define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */
77 #define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */
78 #define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */
80 #define GET_USB_SPEED 0x07
82 #define RESET_FX2 0x13
84 #define FW_VERSION_READ 0x0B
85 #define VENDOR_STRING_READ 0x0C
86 #define PRODUCT_STRING_READ 0x0D
87 #define FW_BCD_VERSION_READ 0x14
89 /* firmware revision id's */
90 #define GP8PSK_FW_REV1 0x020604
91 #define GP8PSK_FW_REV2 0x020704
92 #define GP8PSK_FW_VERS(_fw_vers) ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0])
94 extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
95 extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
96 extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
97 u16 index, u8 *b, int blen);
98 extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d);
100 #endif