include/media/davinci/vpbe.h

   1 /*
   2  * Copyright (C) 2010 Texas Instruments Inc
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation version 2.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  11  * GNU General Public License for more details.
  12  *
  13  * You should have received a copy of the GNU General Public License
  14  * along with this program; if not, write to the Free Software
  15  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16  */
  17 #ifndef _VPBE_H
  18 #define _VPBE_H
  19
  20 #include <linux/videodev2.h>
  21 #include <linux/i2c.h>
  22
  23 #include <media/v4l2-dev.h>
  24 #include <media/v4l2-ioctl.h>
  25 #include <media/v4l2-device.h>
  26 #include <media/davinci/vpbe_osd.h>
  27 #include <media/davinci/vpbe_venc.h>
  28 #include <media/davinci/vpbe_types.h>
  29
  30 /* OSD configuration info */
  31 struct osd_config_info {
  32         char module_name[32];
  33 };
  34
  35 struct vpbe_output {
  36         struct v4l2_output output;
  37         /*
  38          * If output capabilities include dv_timings, list supported timings
  39          * below
  40          */
  41         char *subdev_name;
  42         /*
  43          * defualt_mode identifies the default timings set at the venc or
  44          * external encoder.
  45          */
  46         char *default_mode;
  47         /*
  48          * Fields below are used for supporting multiple modes. For example,
  49          * LCD panel might support different modes and they are listed here.
  50          * Similarly for supporting external encoders, lcd controller port
  51          * requires a set of non-standard timing values to be listed here for
  52          * each supported mode since venc is used in non-standard timing mode
  53          * for interfacing with external encoder similar to configuring lcd
  54          * panel timings
  55          */
  56         unsigned int num_modes;
  57         struct vpbe_enc_mode_info *modes;
  58         /*
  59          * Bus configuration goes here for external encoders. Some encoders
  60          * may require multiple interface types for each of the output. For
  61          * example, SD modes would use YCC8 where as HD mode would use YCC16.
  62          * Not sure if this is needed on a per mode basis instead of per
  63          * output basis. If per mode is needed, we may have to move this to
  64          * mode_info structure
  65          */
  66         u32 if_params;
  67 };
  68
  69 /* encoder configuration info */
  70 struct encoder_config_info {
  71         char module_name[32];
  72         /* Is this an i2c device ? */
  73         unsigned int is_i2c:1;
  74         /* i2c subdevice board info */
  75         struct i2c_board_info board_info;
  76 };
  77
  78 /*amplifier configuration info */
  79 struct amp_config_info {
  80         char module_name[32];
  81         /* Is this an i2c device ? */
  82         unsigned int is_i2c:1;
  83         /* i2c subdevice board info */
  84         struct i2c_board_info board_info;
  85 };
  86
  87 /* structure for defining vpbe display subsystem components */
  88 struct vpbe_config {
  89         char module_name[32];
  90         /* i2c bus adapter no */
  91         int i2c_adapter_id;
  92         struct osd_config_info osd;
  93         struct encoder_config_info venc;
  94         /* external encoder information goes here */
  95         int num_ext_encoders;
  96         struct encoder_config_info *ext_encoders;
  97         /* amplifier information goes here */
  98         struct amp_config_info *amp;
  99         int num_outputs;
 100         /* Order is venc outputs followed by LCD and then external encoders */
 101         struct vpbe_output *outputs;
 102 };
 103
 104 struct vpbe_device;
 105
 106 struct vpbe_device_ops {
 107         /* crop cap for the display */
 108         int (*g_cropcap)(struct vpbe_device *vpbe_dev,
 109                          struct v4l2_cropcap *cropcap);
 110
 111         /* Enumerate the outputs */
 112         int (*enum_outputs)(struct vpbe_device *vpbe_dev,
 113                             struct v4l2_output *output);
 114
 115         /* Set output to the given index */
 116         int (*set_output)(struct vpbe_device *vpbe_dev,
 117                          int index);
 118
 119         /* Get current output */
 120         unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
 121
 122         /* Set DV preset at current output */
 123         int (*s_dv_timings)(struct vpbe_device *vpbe_dev,
 124                            struct v4l2_dv_timings *dv_timings);
 125
 126         /* Get DV presets supported at the output */
 127         int (*g_dv_timings)(struct vpbe_device *vpbe_dev,
 128                            struct v4l2_dv_timings *dv_timings);
 129
 130         /* Enumerate the DV Presets supported at the output */
 131         int (*enum_dv_timings)(struct vpbe_device *vpbe_dev,
 132                                struct v4l2_enum_dv_timings *timings_info);
 133
 134         /* Set std at the output */
 135         int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id);
 136
 137         /* Get the current std at the output */
 138         int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
 139
 140         /* initialize the device */
 141         int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev);
 142
 143         /* De-initialize the device */
 144         void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev);
 145
 146         /* Get the current mode info */
 147         int (*get_mode_info)(struct vpbe_device *vpbe_dev,
 148                              struct vpbe_enc_mode_info*);
 149
 150         /*
 151          * Set the current mode in the encoder. Alternate way of setting
 152          * standard or DV preset or custom timings in the encoder
 153          */
 154         int (*set_mode)(struct vpbe_device *vpbe_dev,
 155                         struct vpbe_enc_mode_info*);
 156         /* Power management operations */
 157         int (*suspend)(struct vpbe_device *vpbe_dev);
 158         int (*resume)(struct vpbe_device *vpbe_dev);
 159 };
 160
 161 /* struct for vpbe device */
 162 struct vpbe_device {
 163         /* V4l2 device */
 164         struct v4l2_device v4l2_dev;
 165         /* vpbe dispay controller cfg */
 166         struct vpbe_config *cfg;
 167         /* parent device */
 168         struct device *pdev;
 169         /* external encoder v4l2 sub devices */
 170         struct v4l2_subdev **encoders;
 171         /* current encoder index */
 172         int current_sd_index;
 173         /* external amplifier v4l2 subdevice */
 174         struct v4l2_subdev *amp;
 175         struct mutex lock;
 176         /* device initialized */
 177         int initialized;
 178         /* vpbe dac clock */
 179         struct clk *dac_clk;
 180         /* osd_device pointer */
 181         struct osd_state *osd_device;
 182         /* venc device pointer */
 183         struct venc_platform_data *venc_device;
 184         /*
 185          * fields below are accessed by users of vpbe_device. Not the
 186          * ones above
 187          */
 188
 189         /* current output */
 190         int current_out_index;
 191         /* lock used by caller to do atomic operation on vpbe device */
 192         /* current timings set in the controller */
 193         struct vpbe_enc_mode_info current_timings;
 194         /* venc sub device */
 195         struct v4l2_subdev *venc;
 196         /* device operations below */
 197         struct vpbe_device_ops ops;
 198 };
 199
 200 #endif