1 // SPDX-License-Identifier: GPL-2.0
3 * Fusb300 UDC (USB gadget)
5 * Copyright (C) 2010 Faraday Technology Corp.
7 * Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
9 #include <linux/dma-mapping.h>
10 #include <linux/err.h>
11 #include <linux/interrupt.h>
13 #include <linux/module.h>
14 #include <linux/platform_device.h>
15 #include <linux/usb/ch9.h>
16 #include <linux/usb/gadget.h>
18 #include "fusb300_udc.h"
20 MODULE_DESCRIPTION("FUSB300 USB gadget driver");
21 MODULE_LICENSE("GPL");
22 MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>");
23 MODULE_ALIAS("platform:fusb300_udc");
25 #define DRIVER_VERSION "20 October 2010"
27 static const char udc_name
[] = "fusb300_udc";
28 static const char * const fusb300_ep_name
[] = {
29 "ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", "ep8", "ep9",
30 "ep10", "ep11", "ep12", "ep13", "ep14", "ep15"
33 static void done(struct fusb300_ep
*ep
, struct fusb300_request
*req
,
36 static void fusb300_enable_bit(struct fusb300
*fusb300
, u32 offset
,
39 u32 reg
= ioread32(fusb300
->reg
+ offset
);
42 iowrite32(reg
, fusb300
->reg
+ offset
);
45 static void fusb300_disable_bit(struct fusb300
*fusb300
, u32 offset
,
48 u32 reg
= ioread32(fusb300
->reg
+ offset
);
51 iowrite32(reg
, fusb300
->reg
+ offset
);
55 static void fusb300_ep_setting(struct fusb300_ep
*ep
,
56 struct fusb300_ep_info info
)
58 ep
->epnum
= info
.epnum
;
62 static int fusb300_ep_release(struct fusb300_ep
*ep
)
72 static void fusb300_set_fifo_entry(struct fusb300
*fusb300
,
75 u32 val
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET1(ep
));
77 val
&= ~FUSB300_EPSET1_FIFOENTRY_MSK
;
78 val
|= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM
);
79 iowrite32(val
, fusb300
->reg
+ FUSB300_OFFSET_EPSET1(ep
));
82 static void fusb300_set_start_entry(struct fusb300
*fusb300
,
85 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET1(ep
));
86 u32 start_entry
= fusb300
->fifo_entry_num
* FUSB300_FIFO_ENTRY_NUM
;
88 reg
&= ~FUSB300_EPSET1_START_ENTRY_MSK
;
89 reg
|= FUSB300_EPSET1_START_ENTRY(start_entry
);
90 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_EPSET1(ep
));
91 if (fusb300
->fifo_entry_num
== FUSB300_MAX_FIFO_ENTRY
) {
92 fusb300
->fifo_entry_num
= 0;
94 pr_err("fifo entry is over the maximum number!\n");
96 fusb300
->fifo_entry_num
++;
99 /* set fusb300_set_start_entry first before fusb300_set_epaddrofs */
100 static void fusb300_set_epaddrofs(struct fusb300
*fusb300
,
101 struct fusb300_ep_info info
)
103 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET2(info
.epnum
));
105 reg
&= ~FUSB300_EPSET2_ADDROFS_MSK
;
106 reg
|= FUSB300_EPSET2_ADDROFS(fusb300
->addrofs
);
107 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_EPSET2(info
.epnum
));
108 fusb300
->addrofs
+= (info
.maxpacket
+ 7) / 8 * FUSB300_FIFO_ENTRY_NUM
;
111 static void ep_fifo_setting(struct fusb300
*fusb300
,
112 struct fusb300_ep_info info
)
114 fusb300_set_fifo_entry(fusb300
, info
.epnum
);
115 fusb300_set_start_entry(fusb300
, info
.epnum
);
116 fusb300_set_epaddrofs(fusb300
, info
);
119 static void fusb300_set_eptype(struct fusb300
*fusb300
,
120 struct fusb300_ep_info info
)
122 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET1(info
.epnum
));
124 reg
&= ~FUSB300_EPSET1_TYPE_MSK
;
125 reg
|= FUSB300_EPSET1_TYPE(info
.type
);
126 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_EPSET1(info
.epnum
));
129 static void fusb300_set_epdir(struct fusb300
*fusb300
,
130 struct fusb300_ep_info info
)
136 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET1(info
.epnum
));
137 reg
&= ~FUSB300_EPSET1_DIR_MSK
;
138 reg
|= FUSB300_EPSET1_DIRIN
;
139 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_EPSET1(info
.epnum
));
142 static void fusb300_set_ep_active(struct fusb300
*fusb300
,
145 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET1(ep
));
147 reg
|= FUSB300_EPSET1_ACTEN
;
148 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_EPSET1(ep
));
151 static void fusb300_set_epmps(struct fusb300
*fusb300
,
152 struct fusb300_ep_info info
)
154 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET2(info
.epnum
));
156 reg
&= ~FUSB300_EPSET2_MPS_MSK
;
157 reg
|= FUSB300_EPSET2_MPS(info
.maxpacket
);
158 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_EPSET2(info
.epnum
));
161 static void fusb300_set_interval(struct fusb300
*fusb300
,
162 struct fusb300_ep_info info
)
164 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET1(info
.epnum
));
166 reg
&= ~FUSB300_EPSET1_INTERVAL(0x7);
167 reg
|= FUSB300_EPSET1_INTERVAL(info
.interval
);
168 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_EPSET1(info
.epnum
));
171 static void fusb300_set_bwnum(struct fusb300
*fusb300
,
172 struct fusb300_ep_info info
)
174 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET1(info
.epnum
));
176 reg
&= ~FUSB300_EPSET1_BWNUM(0x3);
177 reg
|= FUSB300_EPSET1_BWNUM(info
.bw_num
);
178 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_EPSET1(info
.epnum
));
181 static void set_ep_reg(struct fusb300
*fusb300
,
182 struct fusb300_ep_info info
)
184 fusb300_set_eptype(fusb300
, info
);
185 fusb300_set_epdir(fusb300
, info
);
186 fusb300_set_epmps(fusb300
, info
);
189 fusb300_set_interval(fusb300
, info
);
192 fusb300_set_bwnum(fusb300
, info
);
194 fusb300_set_ep_active(fusb300
, info
.epnum
);
197 static int config_ep(struct fusb300_ep
*ep
,
198 const struct usb_endpoint_descriptor
*desc
)
200 struct fusb300
*fusb300
= ep
->fusb300
;
201 struct fusb300_ep_info info
;
209 info
.type
= desc
->bmAttributes
& USB_ENDPOINT_XFERTYPE_MASK
;
210 info
.dir_in
= (desc
->bEndpointAddress
& USB_ENDPOINT_DIR_MASK
) ? 1 : 0;
211 info
.maxpacket
= usb_endpoint_maxp(desc
);
212 info
.epnum
= desc
->bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK
;
214 if ((info
.type
== USB_ENDPOINT_XFER_INT
) ||
215 (info
.type
== USB_ENDPOINT_XFER_ISOC
)) {
216 info
.interval
= desc
->bInterval
;
217 if (info
.type
== USB_ENDPOINT_XFER_ISOC
)
218 info
.bw_num
= usb_endpoint_maxp_mult(desc
);
221 ep_fifo_setting(fusb300
, info
);
223 set_ep_reg(fusb300
, info
);
225 fusb300_ep_setting(ep
, info
);
227 fusb300
->ep
[info
.epnum
] = ep
;
232 static int fusb300_enable(struct usb_ep
*_ep
,
233 const struct usb_endpoint_descriptor
*desc
)
235 struct fusb300_ep
*ep
;
237 ep
= container_of(_ep
, struct fusb300_ep
, ep
);
239 if (ep
->fusb300
->reenum
) {
240 ep
->fusb300
->fifo_entry_num
= 0;
241 ep
->fusb300
->addrofs
= 0;
242 ep
->fusb300
->reenum
= 0;
245 return config_ep(ep
, desc
);
248 static int fusb300_disable(struct usb_ep
*_ep
)
250 struct fusb300_ep
*ep
;
251 struct fusb300_request
*req
;
254 ep
= container_of(_ep
, struct fusb300_ep
, ep
);
258 while (!list_empty(&ep
->queue
)) {
259 req
= list_entry(ep
->queue
.next
, struct fusb300_request
, queue
);
260 spin_lock_irqsave(&ep
->fusb300
->lock
, flags
);
261 done(ep
, req
, -ECONNRESET
);
262 spin_unlock_irqrestore(&ep
->fusb300
->lock
, flags
);
265 return fusb300_ep_release(ep
);
268 static struct usb_request
*fusb300_alloc_request(struct usb_ep
*_ep
,
271 struct fusb300_request
*req
;
273 req
= kzalloc(sizeof(struct fusb300_request
), gfp_flags
);
276 INIT_LIST_HEAD(&req
->queue
);
281 static void fusb300_free_request(struct usb_ep
*_ep
, struct usb_request
*_req
)
283 struct fusb300_request
*req
;
285 req
= container_of(_req
, struct fusb300_request
, req
);
289 static int enable_fifo_int(struct fusb300_ep
*ep
)
291 struct fusb300
*fusb300
= ep
->fusb300
;
294 fusb300_enable_bit(fusb300
, FUSB300_OFFSET_IGER0
,
295 FUSB300_IGER0_EEPn_FIFO_INT(ep
->epnum
));
297 pr_err("can't enable_fifo_int ep0\n");
304 static int disable_fifo_int(struct fusb300_ep
*ep
)
306 struct fusb300
*fusb300
= ep
->fusb300
;
309 fusb300_disable_bit(fusb300
, FUSB300_OFFSET_IGER0
,
310 FUSB300_IGER0_EEPn_FIFO_INT(ep
->epnum
));
312 pr_err("can't disable_fifo_int ep0\n");
319 static void fusb300_set_cxlen(struct fusb300
*fusb300
, u32 length
)
323 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_CSR
);
324 reg
&= ~FUSB300_CSR_LEN_MSK
;
325 reg
|= FUSB300_CSR_LEN(length
);
326 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_CSR
);
329 /* write data to cx fifo */
330 static void fusb300_wrcxf(struct fusb300_ep
*ep
,
331 struct fusb300_request
*req
)
336 struct fusb300
*fusb300
= ep
->fusb300
;
337 u32 length
= req
->req
.length
- req
->req
.actual
;
339 tmp
= req
->req
.buf
+ req
->req
.actual
;
341 if (length
> SS_CTL_MAX_PACKET_SIZE
) {
342 fusb300_set_cxlen(fusb300
, SS_CTL_MAX_PACKET_SIZE
);
343 for (i
= (SS_CTL_MAX_PACKET_SIZE
>> 2); i
> 0; i
--) {
344 data
= *tmp
| *(tmp
+ 1) << 8 | *(tmp
+ 2) << 16 |
346 iowrite32(data
, fusb300
->reg
+ FUSB300_OFFSET_CXPORT
);
349 req
->req
.actual
+= SS_CTL_MAX_PACKET_SIZE
;
350 } else { /* length is less than max packet size */
351 fusb300_set_cxlen(fusb300
, length
);
352 for (i
= length
>> 2; i
> 0; i
--) {
353 data
= *tmp
| *(tmp
+ 1) << 8 | *(tmp
+ 2) << 16 |
355 printk(KERN_DEBUG
" 0x%x\n", data
);
356 iowrite32(data
, fusb300
->reg
+ FUSB300_OFFSET_CXPORT
);
359 switch (length
% 4) {
362 printk(KERN_DEBUG
" 0x%x\n", data
);
363 iowrite32(data
, fusb300
->reg
+ FUSB300_OFFSET_CXPORT
);
366 data
= *tmp
| *(tmp
+ 1) << 8;
367 printk(KERN_DEBUG
" 0x%x\n", data
);
368 iowrite32(data
, fusb300
->reg
+ FUSB300_OFFSET_CXPORT
);
371 data
= *tmp
| *(tmp
+ 1) << 8 | *(tmp
+ 2) << 16;
372 printk(KERN_DEBUG
" 0x%x\n", data
);
373 iowrite32(data
, fusb300
->reg
+ FUSB300_OFFSET_CXPORT
);
378 req
->req
.actual
+= length
;
382 static void fusb300_set_epnstall(struct fusb300
*fusb300
, u8 ep
)
384 fusb300_enable_bit(fusb300
, FUSB300_OFFSET_EPSET0(ep
),
388 static void fusb300_clear_epnstall(struct fusb300
*fusb300
, u8 ep
)
390 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET0(ep
));
392 if (reg
& FUSB300_EPSET0_STL
) {
393 printk(KERN_DEBUG
"EP%d stall... Clear!!\n", ep
);
394 reg
|= FUSB300_EPSET0_STL_CLR
;
395 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_EPSET0(ep
));
399 static void ep0_queue(struct fusb300_ep
*ep
, struct fusb300_request
*req
)
401 if (ep
->fusb300
->ep0_dir
) { /* if IN */
402 if (req
->req
.length
) {
403 fusb300_wrcxf(ep
, req
);
405 printk(KERN_DEBUG
"%s : req->req.length = 0x%x\n",
406 __func__
, req
->req
.length
);
407 if ((req
->req
.length
== req
->req
.actual
) ||
408 (req
->req
.actual
< ep
->ep
.maxpacket
))
411 if (!req
->req
.length
)
414 fusb300_enable_bit(ep
->fusb300
, FUSB300_OFFSET_IGER1
,
415 FUSB300_IGER1_CX_OUT_INT
);
419 static int fusb300_queue(struct usb_ep
*_ep
, struct usb_request
*_req
,
422 struct fusb300_ep
*ep
;
423 struct fusb300_request
*req
;
427 ep
= container_of(_ep
, struct fusb300_ep
, ep
);
428 req
= container_of(_req
, struct fusb300_request
, req
);
430 if (ep
->fusb300
->gadget
.speed
== USB_SPEED_UNKNOWN
)
433 spin_lock_irqsave(&ep
->fusb300
->lock
, flags
);
435 if (list_empty(&ep
->queue
))
438 list_add_tail(&req
->queue
, &ep
->queue
);
441 req
->req
.status
= -EINPROGRESS
;
443 if (ep
->ep
.desc
== NULL
) /* ep0 */
445 else if (request
&& !ep
->stall
)
448 spin_unlock_irqrestore(&ep
->fusb300
->lock
, flags
);
453 static int fusb300_dequeue(struct usb_ep
*_ep
, struct usb_request
*_req
)
455 struct fusb300_ep
*ep
;
456 struct fusb300_request
*req
;
459 ep
= container_of(_ep
, struct fusb300_ep
, ep
);
460 req
= container_of(_req
, struct fusb300_request
, req
);
462 spin_lock_irqsave(&ep
->fusb300
->lock
, flags
);
463 if (!list_empty(&ep
->queue
))
464 done(ep
, req
, -ECONNRESET
);
465 spin_unlock_irqrestore(&ep
->fusb300
->lock
, flags
);
470 static int fusb300_set_halt_and_wedge(struct usb_ep
*_ep
, int value
, int wedge
)
472 struct fusb300_ep
*ep
;
473 struct fusb300
*fusb300
;
477 ep
= container_of(_ep
, struct fusb300_ep
, ep
);
479 fusb300
= ep
->fusb300
;
481 spin_lock_irqsave(&ep
->fusb300
->lock
, flags
);
483 if (!list_empty(&ep
->queue
)) {
489 fusb300_set_epnstall(fusb300
, ep
->epnum
);
494 fusb300_clear_epnstall(fusb300
, ep
->epnum
);
500 spin_unlock_irqrestore(&ep
->fusb300
->lock
, flags
);
504 static int fusb300_set_halt(struct usb_ep
*_ep
, int value
)
506 return fusb300_set_halt_and_wedge(_ep
, value
, 0);
509 static int fusb300_set_wedge(struct usb_ep
*_ep
)
511 return fusb300_set_halt_and_wedge(_ep
, 1, 1);
514 static void fusb300_fifo_flush(struct usb_ep
*_ep
)
518 static const struct usb_ep_ops fusb300_ep_ops
= {
519 .enable
= fusb300_enable
,
520 .disable
= fusb300_disable
,
522 .alloc_request
= fusb300_alloc_request
,
523 .free_request
= fusb300_free_request
,
525 .queue
= fusb300_queue
,
526 .dequeue
= fusb300_dequeue
,
528 .set_halt
= fusb300_set_halt
,
529 .fifo_flush
= fusb300_fifo_flush
,
530 .set_wedge
= fusb300_set_wedge
,
533 /*****************************************************************************/
534 static void fusb300_clear_int(struct fusb300
*fusb300
, u32 offset
,
537 iowrite32(value
, fusb300
->reg
+ offset
);
540 static void fusb300_reset(void)
544 static void fusb300_set_cxstall(struct fusb300
*fusb300
)
546 fusb300_enable_bit(fusb300
, FUSB300_OFFSET_CSR
,
550 static void fusb300_set_cxdone(struct fusb300
*fusb300
)
552 fusb300_enable_bit(fusb300
, FUSB300_OFFSET_CSR
,
556 /* read data from cx fifo */
557 static void fusb300_rdcxf(struct fusb300
*fusb300
,
558 u8
*buffer
, u32 length
)
566 for (i
= (length
>> 2); i
> 0; i
--) {
567 data
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_CXPORT
);
568 printk(KERN_DEBUG
" 0x%x\n", data
);
570 *(tmp
+ 1) = (data
>> 8) & 0xFF;
571 *(tmp
+ 2) = (data
>> 16) & 0xFF;
572 *(tmp
+ 3) = (data
>> 24) & 0xFF;
576 switch (length
% 4) {
578 data
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_CXPORT
);
579 printk(KERN_DEBUG
" 0x%x\n", data
);
583 data
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_CXPORT
);
584 printk(KERN_DEBUG
" 0x%x\n", data
);
586 *(tmp
+ 1) = (data
>> 8) & 0xFF;
589 data
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_CXPORT
);
590 printk(KERN_DEBUG
" 0x%x\n", data
);
592 *(tmp
+ 1) = (data
>> 8) & 0xFF;
593 *(tmp
+ 2) = (data
>> 16) & 0xFF;
600 static void fusb300_rdfifo(struct fusb300_ep
*ep
,
601 struct fusb300_request
*req
,
607 struct fusb300
*fusb300
= ep
->fusb300
;
609 tmp
= req
->req
.buf
+ req
->req
.actual
;
610 req
->req
.actual
+= length
;
612 if (req
->req
.actual
> req
->req
.length
)
613 printk(KERN_DEBUG
"req->req.actual > req->req.length\n");
615 for (i
= (length
>> 2); i
> 0; i
--) {
616 data
= ioread32(fusb300
->reg
+
617 FUSB300_OFFSET_EPPORT(ep
->epnum
));
619 *(tmp
+ 1) = (data
>> 8) & 0xFF;
620 *(tmp
+ 2) = (data
>> 16) & 0xFF;
621 *(tmp
+ 3) = (data
>> 24) & 0xFF;
625 switch (length
% 4) {
627 data
= ioread32(fusb300
->reg
+
628 FUSB300_OFFSET_EPPORT(ep
->epnum
));
632 data
= ioread32(fusb300
->reg
+
633 FUSB300_OFFSET_EPPORT(ep
->epnum
));
635 *(tmp
+ 1) = (data
>> 8) & 0xFF;
638 data
= ioread32(fusb300
->reg
+
639 FUSB300_OFFSET_EPPORT(ep
->epnum
));
641 *(tmp
+ 1) = (data
>> 8) & 0xFF;
642 *(tmp
+ 2) = (data
>> 16) & 0xFF;
649 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_IGR1
);
650 reg
&= FUSB300_IGR1_SYNF0_EMPTY_INT
;
652 printk(KERN_INFO
"sync fifo is not empty!\n");
657 static u8
fusb300_get_epnstall(struct fusb300
*fusb300
, u8 ep
)
660 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPSET0(ep
));
662 value
= reg
& FUSB300_EPSET0_STL
;
667 static u8
fusb300_get_cxstall(struct fusb300
*fusb300
)
670 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_CSR
);
672 value
= (reg
& FUSB300_CSR_STL
) >> 1;
677 static void request_error(struct fusb300
*fusb300
)
679 fusb300_set_cxstall(fusb300
);
680 printk(KERN_DEBUG
"request error!!\n");
683 static void get_status(struct fusb300
*fusb300
, struct usb_ctrlrequest
*ctrl
)
684 __releases(fusb300
->lock
)
685 __acquires(fusb300
->lock
)
689 u16 w_index
= ctrl
->wIndex
;
691 switch (ctrl
->bRequestType
& USB_RECIP_MASK
) {
692 case USB_RECIP_DEVICE
:
693 status
= 1 << USB_DEVICE_SELF_POWERED
;
695 case USB_RECIP_INTERFACE
:
698 case USB_RECIP_ENDPOINT
:
699 ep
= w_index
& USB_ENDPOINT_NUMBER_MASK
;
701 if (fusb300_get_epnstall(fusb300
, ep
))
702 status
= 1 << USB_ENDPOINT_HALT
;
704 if (fusb300_get_cxstall(fusb300
))
710 request_error(fusb300
);
714 fusb300
->ep0_data
= cpu_to_le16(status
);
715 fusb300
->ep0_req
->buf
= &fusb300
->ep0_data
;
716 fusb300
->ep0_req
->length
= 2;
718 spin_unlock(&fusb300
->lock
);
719 fusb300_queue(fusb300
->gadget
.ep0
, fusb300
->ep0_req
, GFP_KERNEL
);
720 spin_lock(&fusb300
->lock
);
723 static void set_feature(struct fusb300
*fusb300
, struct usb_ctrlrequest
*ctrl
)
727 switch (ctrl
->bRequestType
& USB_RECIP_MASK
) {
728 case USB_RECIP_DEVICE
:
729 fusb300_set_cxdone(fusb300
);
731 case USB_RECIP_INTERFACE
:
732 fusb300_set_cxdone(fusb300
);
734 case USB_RECIP_ENDPOINT
: {
735 u16 w_index
= le16_to_cpu(ctrl
->wIndex
);
737 ep
= w_index
& USB_ENDPOINT_NUMBER_MASK
;
739 fusb300_set_epnstall(fusb300
, ep
);
741 fusb300_set_cxstall(fusb300
);
742 fusb300_set_cxdone(fusb300
);
746 request_error(fusb300
);
751 static void fusb300_clear_seqnum(struct fusb300
*fusb300
, u8 ep
)
753 fusb300_enable_bit(fusb300
, FUSB300_OFFSET_EPSET0(ep
),
754 FUSB300_EPSET0_CLRSEQNUM
);
757 static void clear_feature(struct fusb300
*fusb300
, struct usb_ctrlrequest
*ctrl
)
759 struct fusb300_ep
*ep
=
760 fusb300
->ep
[ctrl
->wIndex
& USB_ENDPOINT_NUMBER_MASK
];
762 switch (ctrl
->bRequestType
& USB_RECIP_MASK
) {
763 case USB_RECIP_DEVICE
:
764 fusb300_set_cxdone(fusb300
);
766 case USB_RECIP_INTERFACE
:
767 fusb300_set_cxdone(fusb300
);
769 case USB_RECIP_ENDPOINT
:
770 if (ctrl
->wIndex
& USB_ENDPOINT_NUMBER_MASK
) {
772 fusb300_set_cxdone(fusb300
);
777 fusb300_clear_seqnum(fusb300
, ep
->epnum
);
778 fusb300_clear_epnstall(fusb300
, ep
->epnum
);
779 if (!list_empty(&ep
->queue
))
783 fusb300_set_cxdone(fusb300
);
786 request_error(fusb300
);
791 static void fusb300_set_dev_addr(struct fusb300
*fusb300
, u16 addr
)
793 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_DAR
);
795 reg
&= ~FUSB300_DAR_DRVADDR_MSK
;
796 reg
|= FUSB300_DAR_DRVADDR(addr
);
798 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_DAR
);
801 static void set_address(struct fusb300
*fusb300
, struct usb_ctrlrequest
*ctrl
)
803 if (ctrl
->wValue
>= 0x0100)
804 request_error(fusb300
);
806 fusb300_set_dev_addr(fusb300
, ctrl
->wValue
);
807 fusb300_set_cxdone(fusb300
);
811 #define UVC_COPY_DESCRIPTORS(mem, src) \
813 const struct usb_descriptor_header * const *__src; \
814 for (__src = src; *__src; ++__src) { \
815 memcpy(mem, *__src, (*__src)->bLength); \
816 mem += (*__src)->bLength; \
820 static int setup_packet(struct fusb300
*fusb300
, struct usb_ctrlrequest
*ctrl
)
826 fusb300_rdcxf(fusb300
, p
, 8);
827 fusb300
->ep0_dir
= ctrl
->bRequestType
& USB_DIR_IN
;
828 fusb300
->ep0_length
= ctrl
->wLength
;
831 if ((ctrl
->bRequestType
& USB_TYPE_MASK
) == USB_TYPE_STANDARD
) {
832 switch (ctrl
->bRequest
) {
833 case USB_REQ_GET_STATUS
:
834 get_status(fusb300
, ctrl
);
836 case USB_REQ_CLEAR_FEATURE
:
837 clear_feature(fusb300
, ctrl
);
839 case USB_REQ_SET_FEATURE
:
840 set_feature(fusb300
, ctrl
);
842 case USB_REQ_SET_ADDRESS
:
843 set_address(fusb300
, ctrl
);
845 case USB_REQ_SET_CONFIGURATION
:
846 fusb300_enable_bit(fusb300
, FUSB300_OFFSET_DAR
,
847 FUSB300_DAR_SETCONFG
);
848 /* clear sequence number */
849 for (i
= 1; i
<= FUSB300_MAX_NUM_EP
; i
++)
850 fusb300_clear_seqnum(fusb300
, i
);
864 static void done(struct fusb300_ep
*ep
, struct fusb300_request
*req
,
867 list_del_init(&req
->queue
);
869 /* don't modify queue heads during completion callback */
870 if (ep
->fusb300
->gadget
.speed
== USB_SPEED_UNKNOWN
)
871 req
->req
.status
= -ESHUTDOWN
;
873 req
->req
.status
= status
;
875 spin_unlock(&ep
->fusb300
->lock
);
876 usb_gadget_giveback_request(&ep
->ep
, &req
->req
);
877 spin_lock(&ep
->fusb300
->lock
);
880 disable_fifo_int(ep
);
881 if (!list_empty(&ep
->queue
))
884 fusb300_set_cxdone(ep
->fusb300
);
887 static void fusb300_fill_idma_prdtbl(struct fusb300_ep
*ep
, dma_addr_t d
,
895 reg
= ioread32(ep
->fusb300
->reg
+
896 FUSB300_OFFSET_EPPRD_W0(ep
->epnum
));
897 reg
&= FUSB300_EPPRD0_H
;
900 iowrite32(d
, ep
->fusb300
->reg
+ FUSB300_OFFSET_EPPRD_W1(ep
->epnum
));
902 value
= FUSB300_EPPRD0_BTC(len
) | FUSB300_EPPRD0_H
|
903 FUSB300_EPPRD0_F
| FUSB300_EPPRD0_L
| FUSB300_EPPRD0_I
;
904 iowrite32(value
, ep
->fusb300
->reg
+ FUSB300_OFFSET_EPPRD_W0(ep
->epnum
));
906 iowrite32(0x0, ep
->fusb300
->reg
+ FUSB300_OFFSET_EPPRD_W2(ep
->epnum
));
908 fusb300_enable_bit(ep
->fusb300
, FUSB300_OFFSET_EPPRDRDY
,
909 FUSB300_EPPRDR_EP_PRD_RDY(ep
->epnum
));
912 static void fusb300_wait_idma_finished(struct fusb300_ep
*ep
)
917 reg
= ioread32(ep
->fusb300
->reg
+ FUSB300_OFFSET_IGR1
);
918 if ((reg
& FUSB300_IGR1_VBUS_CHG_INT
) ||
919 (reg
& FUSB300_IGR1_WARM_RST_INT
) ||
920 (reg
& FUSB300_IGR1_HOT_RST_INT
) ||
921 (reg
& FUSB300_IGR1_USBRST_INT
)
924 reg
= ioread32(ep
->fusb300
->reg
+ FUSB300_OFFSET_IGR0
);
925 reg
&= FUSB300_IGR0_EPn_PRD_INT(ep
->epnum
);
928 fusb300_clear_int(ep
->fusb300
, FUSB300_OFFSET_IGR0
,
929 FUSB300_IGR0_EPn_PRD_INT(ep
->epnum
));
933 reg
= ioread32(ep
->fusb300
->reg
+ FUSB300_OFFSET_IGER0
);
934 reg
&= ~FUSB300_IGER0_EEPn_PRD_INT(ep
->epnum
);
935 iowrite32(reg
, ep
->fusb300
->reg
+ FUSB300_OFFSET_IGER0
);
938 static void fusb300_set_idma(struct fusb300_ep
*ep
,
939 struct fusb300_request
*req
)
943 ret
= usb_gadget_map_request(&ep
->fusb300
->gadget
,
944 &req
->req
, DMA_TO_DEVICE
);
948 fusb300_enable_bit(ep
->fusb300
, FUSB300_OFFSET_IGER0
,
949 FUSB300_IGER0_EEPn_PRD_INT(ep
->epnum
));
951 fusb300_fill_idma_prdtbl(ep
, req
->req
.dma
, req
->req
.length
);
952 /* check idma is done */
953 fusb300_wait_idma_finished(ep
);
955 usb_gadget_unmap_request(&ep
->fusb300
->gadget
,
956 &req
->req
, DMA_TO_DEVICE
);
959 static void in_ep_fifo_handler(struct fusb300_ep
*ep
)
961 struct fusb300_request
*req
= list_entry(ep
->queue
.next
,
962 struct fusb300_request
, queue
);
965 fusb300_set_idma(ep
, req
);
969 static void out_ep_fifo_handler(struct fusb300_ep
*ep
)
971 struct fusb300
*fusb300
= ep
->fusb300
;
972 struct fusb300_request
*req
= list_entry(ep
->queue
.next
,
973 struct fusb300_request
, queue
);
974 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_EPFFR(ep
->epnum
));
975 u32 length
= reg
& FUSB300_FFR_BYCNT
;
977 fusb300_rdfifo(ep
, req
, length
);
979 /* finish out transfer */
980 if ((req
->req
.length
== req
->req
.actual
) || (length
< ep
->ep
.maxpacket
))
984 static void check_device_mode(struct fusb300
*fusb300
)
986 u32 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_GCR
);
988 switch (reg
& FUSB300_GCR_DEVEN_MSK
) {
989 case FUSB300_GCR_DEVEN_SS
:
990 fusb300
->gadget
.speed
= USB_SPEED_SUPER
;
992 case FUSB300_GCR_DEVEN_HS
:
993 fusb300
->gadget
.speed
= USB_SPEED_HIGH
;
995 case FUSB300_GCR_DEVEN_FS
:
996 fusb300
->gadget
.speed
= USB_SPEED_FULL
;
999 fusb300
->gadget
.speed
= USB_SPEED_UNKNOWN
;
1002 printk(KERN_INFO
"dev_mode = %d\n", (reg
& FUSB300_GCR_DEVEN_MSK
));
1006 static void fusb300_ep0out(struct fusb300
*fusb300
)
1008 struct fusb300_ep
*ep
= fusb300
->ep
[0];
1011 if (!list_empty(&ep
->queue
)) {
1012 struct fusb300_request
*req
;
1014 req
= list_first_entry(&ep
->queue
,
1015 struct fusb300_request
, queue
);
1016 if (req
->req
.length
)
1017 fusb300_rdcxf(ep
->fusb300
, req
->req
.buf
,
1020 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_IGER1
);
1021 reg
&= ~FUSB300_IGER1_CX_OUT_INT
;
1022 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_IGER1
);
1024 pr_err("%s : empty queue\n", __func__
);
1027 static void fusb300_ep0in(struct fusb300
*fusb300
)
1029 struct fusb300_request
*req
;
1030 struct fusb300_ep
*ep
= fusb300
->ep
[0];
1032 if ((!list_empty(&ep
->queue
)) && (fusb300
->ep0_dir
)) {
1033 req
= list_entry(ep
->queue
.next
,
1034 struct fusb300_request
, queue
);
1035 if (req
->req
.length
)
1036 fusb300_wrcxf(ep
, req
);
1037 if ((req
->req
.length
- req
->req
.actual
) < ep
->ep
.maxpacket
)
1040 fusb300_set_cxdone(fusb300
);
1043 static void fusb300_grp2_handler(void)
1047 static void fusb300_grp3_handler(void)
1051 static void fusb300_grp4_handler(void)
1055 static void fusb300_grp5_handler(void)
1059 static irqreturn_t
fusb300_irq(int irq
, void *_fusb300
)
1061 struct fusb300
*fusb300
= _fusb300
;
1062 u32 int_grp1
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_IGR1
);
1063 u32 int_grp1_en
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_IGER1
);
1064 u32 int_grp0
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_IGR0
);
1065 u32 int_grp0_en
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_IGER0
);
1066 struct usb_ctrlrequest ctrl
;
1071 spin_lock(&fusb300
->lock
);
1073 int_grp1
&= int_grp1_en
;
1074 int_grp0
&= int_grp0_en
;
1076 if (int_grp1
& FUSB300_IGR1_WARM_RST_INT
) {
1077 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1078 FUSB300_IGR1_WARM_RST_INT
);
1079 printk(KERN_INFO
"fusb300_warmreset\n");
1083 if (int_grp1
& FUSB300_IGR1_HOT_RST_INT
) {
1084 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1085 FUSB300_IGR1_HOT_RST_INT
);
1086 printk(KERN_INFO
"fusb300_hotreset\n");
1090 if (int_grp1
& FUSB300_IGR1_USBRST_INT
) {
1091 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1092 FUSB300_IGR1_USBRST_INT
);
1095 /* COMABT_INT has a highest priority */
1097 if (int_grp1
& FUSB300_IGR1_CX_COMABT_INT
) {
1098 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1099 FUSB300_IGR1_CX_COMABT_INT
);
1100 printk(KERN_INFO
"fusb300_ep0abt\n");
1103 if (int_grp1
& FUSB300_IGR1_VBUS_CHG_INT
) {
1104 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1105 FUSB300_IGR1_VBUS_CHG_INT
);
1106 printk(KERN_INFO
"fusb300_vbus_change\n");
1109 if (int_grp1
& FUSB300_IGR1_U3_EXIT_FAIL_INT
) {
1110 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1111 FUSB300_IGR1_U3_EXIT_FAIL_INT
);
1114 if (int_grp1
& FUSB300_IGR1_U2_EXIT_FAIL_INT
) {
1115 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1116 FUSB300_IGR1_U2_EXIT_FAIL_INT
);
1119 if (int_grp1
& FUSB300_IGR1_U1_EXIT_FAIL_INT
) {
1120 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1121 FUSB300_IGR1_U1_EXIT_FAIL_INT
);
1124 if (int_grp1
& FUSB300_IGR1_U2_ENTRY_FAIL_INT
) {
1125 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1126 FUSB300_IGR1_U2_ENTRY_FAIL_INT
);
1129 if (int_grp1
& FUSB300_IGR1_U1_ENTRY_FAIL_INT
) {
1130 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1131 FUSB300_IGR1_U1_ENTRY_FAIL_INT
);
1134 if (int_grp1
& FUSB300_IGR1_U3_EXIT_INT
) {
1135 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1136 FUSB300_IGR1_U3_EXIT_INT
);
1137 printk(KERN_INFO
"FUSB300_IGR1_U3_EXIT_INT\n");
1140 if (int_grp1
& FUSB300_IGR1_U2_EXIT_INT
) {
1141 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1142 FUSB300_IGR1_U2_EXIT_INT
);
1143 printk(KERN_INFO
"FUSB300_IGR1_U2_EXIT_INT\n");
1146 if (int_grp1
& FUSB300_IGR1_U1_EXIT_INT
) {
1147 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1148 FUSB300_IGR1_U1_EXIT_INT
);
1149 printk(KERN_INFO
"FUSB300_IGR1_U1_EXIT_INT\n");
1152 if (int_grp1
& FUSB300_IGR1_U3_ENTRY_INT
) {
1153 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1154 FUSB300_IGR1_U3_ENTRY_INT
);
1155 printk(KERN_INFO
"FUSB300_IGR1_U3_ENTRY_INT\n");
1156 fusb300_enable_bit(fusb300
, FUSB300_OFFSET_SSCR1
,
1157 FUSB300_SSCR1_GO_U3_DONE
);
1160 if (int_grp1
& FUSB300_IGR1_U2_ENTRY_INT
) {
1161 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1162 FUSB300_IGR1_U2_ENTRY_INT
);
1163 printk(KERN_INFO
"FUSB300_IGR1_U2_ENTRY_INT\n");
1166 if (int_grp1
& FUSB300_IGR1_U1_ENTRY_INT
) {
1167 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1168 FUSB300_IGR1_U1_ENTRY_INT
);
1169 printk(KERN_INFO
"FUSB300_IGR1_U1_ENTRY_INT\n");
1172 if (int_grp1
& FUSB300_IGR1_RESM_INT
) {
1173 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1174 FUSB300_IGR1_RESM_INT
);
1175 printk(KERN_INFO
"fusb300_resume\n");
1178 if (int_grp1
& FUSB300_IGR1_SUSP_INT
) {
1179 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1180 FUSB300_IGR1_SUSP_INT
);
1181 printk(KERN_INFO
"fusb300_suspend\n");
1184 if (int_grp1
& FUSB300_IGR1_HS_LPM_INT
) {
1185 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1186 FUSB300_IGR1_HS_LPM_INT
);
1187 printk(KERN_INFO
"fusb300_HS_LPM_INT\n");
1190 if (int_grp1
& FUSB300_IGR1_DEV_MODE_CHG_INT
) {
1191 fusb300_clear_int(fusb300
, FUSB300_OFFSET_IGR1
,
1192 FUSB300_IGR1_DEV_MODE_CHG_INT
);
1193 check_device_mode(fusb300
);
1196 if (int_grp1
& FUSB300_IGR1_CX_COMFAIL_INT
) {
1197 fusb300_set_cxstall(fusb300
);
1198 printk(KERN_INFO
"fusb300_ep0fail\n");
1201 if (int_grp1
& FUSB300_IGR1_CX_SETUP_INT
) {
1202 printk(KERN_INFO
"fusb300_ep0setup\n");
1203 if (setup_packet(fusb300
, &ctrl
)) {
1204 spin_unlock(&fusb300
->lock
);
1205 if (fusb300
->driver
->setup(&fusb300
->gadget
, &ctrl
) < 0)
1206 fusb300_set_cxstall(fusb300
);
1207 spin_lock(&fusb300
->lock
);
1211 if (int_grp1
& FUSB300_IGR1_CX_CMDEND_INT
)
1212 printk(KERN_INFO
"fusb300_cmdend\n");
1215 if (int_grp1
& FUSB300_IGR1_CX_OUT_INT
) {
1216 printk(KERN_INFO
"fusb300_cxout\n");
1217 fusb300_ep0out(fusb300
);
1220 if (int_grp1
& FUSB300_IGR1_CX_IN_INT
) {
1221 printk(KERN_INFO
"fusb300_cxin\n");
1222 fusb300_ep0in(fusb300
);
1225 if (int_grp1
& FUSB300_IGR1_INTGRP5
)
1226 fusb300_grp5_handler();
1228 if (int_grp1
& FUSB300_IGR1_INTGRP4
)
1229 fusb300_grp4_handler();
1231 if (int_grp1
& FUSB300_IGR1_INTGRP3
)
1232 fusb300_grp3_handler();
1234 if (int_grp1
& FUSB300_IGR1_INTGRP2
)
1235 fusb300_grp2_handler();
1238 for (i
= 1; i
< FUSB300_MAX_NUM_EP
; i
++) {
1239 if (int_grp0
& FUSB300_IGR0_EPn_FIFO_INT(i
)) {
1240 reg
= ioread32(fusb300
->reg
+
1241 FUSB300_OFFSET_EPSET1(i
));
1242 in
= (reg
& FUSB300_EPSET1_DIRIN
) ? 1 : 0;
1244 in_ep_fifo_handler(fusb300
->ep
[i
]);
1246 out_ep_fifo_handler(fusb300
->ep
[i
]);
1251 spin_unlock(&fusb300
->lock
);
1256 static void fusb300_set_u2_timeout(struct fusb300
*fusb300
,
1261 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_TT
);
1263 reg
|= FUSB300_SSCR2_U2TIMEOUT(time
);
1265 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_TT
);
1268 static void fusb300_set_u1_timeout(struct fusb300
*fusb300
,
1273 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_TT
);
1274 reg
&= ~(0xff << 8);
1275 reg
|= FUSB300_SSCR2_U1TIMEOUT(time
);
1277 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_TT
);
1280 static void init_controller(struct fusb300
*fusb300
)
1287 mask
= val
= FUSB300_AHBBCR_S0_SPLIT_ON
| FUSB300_AHBBCR_S1_SPLIT_ON
;
1288 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_AHBCR
);
1291 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_AHBCR
);
1293 /* enable high-speed LPM */
1294 mask
= val
= FUSB300_HSCR_HS_LPM_PERMIT
;
1295 reg
= ioread32(fusb300
->reg
+ FUSB300_OFFSET_HSCR
);
1298 iowrite32(reg
, fusb300
->reg
+ FUSB300_OFFSET_HSCR
);
1300 /*set u1 u2 timmer*/
1301 fusb300_set_u2_timeout(fusb300
, 0xff);
1302 fusb300_set_u1_timeout(fusb300
, 0xff);
1304 /* enable all grp1 interrupt */
1305 iowrite32(0xcfffff9f, fusb300
->reg
+ FUSB300_OFFSET_IGER1
);
1307 /*------------------------------------------------------------------------*/
1308 static int fusb300_udc_start(struct usb_gadget
*g
,
1309 struct usb_gadget_driver
*driver
)
1311 struct fusb300
*fusb300
= to_fusb300(g
);
1313 /* hook up the driver */
1314 driver
->driver
.bus
= NULL
;
1315 fusb300
->driver
= driver
;
1320 static int fusb300_udc_stop(struct usb_gadget
*g
)
1322 struct fusb300
*fusb300
= to_fusb300(g
);
1324 init_controller(fusb300
);
1325 fusb300
->driver
= NULL
;
1329 /*--------------------------------------------------------------------------*/
1331 static int fusb300_udc_pullup(struct usb_gadget
*_gadget
, int is_active
)
1336 static const struct usb_gadget_ops fusb300_gadget_ops
= {
1337 .pullup
= fusb300_udc_pullup
,
1338 .udc_start
= fusb300_udc_start
,
1339 .udc_stop
= fusb300_udc_stop
,
1342 static int fusb300_remove(struct platform_device
*pdev
)
1344 struct fusb300
*fusb300
= platform_get_drvdata(pdev
);
1346 usb_del_gadget_udc(&fusb300
->gadget
);
1347 iounmap(fusb300
->reg
);
1348 free_irq(platform_get_irq(pdev
, 0), fusb300
);
1350 fusb300_free_request(&fusb300
->ep
[0]->ep
, fusb300
->ep0_req
);
1356 static int fusb300_probe(struct platform_device
*pdev
)
1358 struct resource
*res
, *ires
, *ires1
;
1359 void __iomem
*reg
= NULL
;
1360 struct fusb300
*fusb300
= NULL
;
1361 struct fusb300_ep
*_ep
[FUSB300_MAX_NUM_EP
];
1365 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1368 pr_err("platform_get_resource error.\n");
1372 ires
= platform_get_resource(pdev
, IORESOURCE_IRQ
, 0);
1376 "platform_get_resource IORESOURCE_IRQ error.\n");
1380 ires1
= platform_get_resource(pdev
, IORESOURCE_IRQ
, 1);
1384 "platform_get_resource IORESOURCE_IRQ 1 error.\n");
1388 reg
= ioremap(res
->start
, resource_size(res
));
1391 pr_err("ioremap error.\n");
1395 /* initialize udc */
1396 fusb300
= kzalloc(sizeof(struct fusb300
), GFP_KERNEL
);
1397 if (fusb300
== NULL
) {
1402 for (i
= 0; i
< FUSB300_MAX_NUM_EP
; i
++) {
1403 _ep
[i
] = kzalloc(sizeof(struct fusb300_ep
), GFP_KERNEL
);
1404 if (_ep
[i
] == NULL
) {
1408 fusb300
->ep
[i
] = _ep
[i
];
1411 spin_lock_init(&fusb300
->lock
);
1413 platform_set_drvdata(pdev
, fusb300
);
1415 fusb300
->gadget
.ops
= &fusb300_gadget_ops
;
1417 fusb300
->gadget
.max_speed
= USB_SPEED_HIGH
;
1418 fusb300
->gadget
.name
= udc_name
;
1421 ret
= request_irq(ires
->start
, fusb300_irq
, IRQF_SHARED
,
1424 pr_err("request_irq error (%d)\n", ret
);
1428 ret
= request_irq(ires1
->start
, fusb300_irq
,
1429 IRQF_SHARED
, udc_name
, fusb300
);
1431 pr_err("request_irq1 error (%d)\n", ret
);
1435 INIT_LIST_HEAD(&fusb300
->gadget
.ep_list
);
1437 for (i
= 0; i
< FUSB300_MAX_NUM_EP
; i
++) {
1438 struct fusb300_ep
*ep
= fusb300
->ep
[i
];
1441 INIT_LIST_HEAD(&fusb300
->ep
[i
]->ep
.ep_list
);
1442 list_add_tail(&fusb300
->ep
[i
]->ep
.ep_list
,
1443 &fusb300
->gadget
.ep_list
);
1445 ep
->fusb300
= fusb300
;
1446 INIT_LIST_HEAD(&ep
->queue
);
1447 ep
->ep
.name
= fusb300_ep_name
[i
];
1448 ep
->ep
.ops
= &fusb300_ep_ops
;
1449 usb_ep_set_maxpacket_limit(&ep
->ep
, HS_BULK_MAX_PACKET_SIZE
);
1452 ep
->ep
.caps
.type_control
= true;
1454 ep
->ep
.caps
.type_iso
= true;
1455 ep
->ep
.caps
.type_bulk
= true;
1456 ep
->ep
.caps
.type_int
= true;
1459 ep
->ep
.caps
.dir_in
= true;
1460 ep
->ep
.caps
.dir_out
= true;
1462 usb_ep_set_maxpacket_limit(&fusb300
->ep
[0]->ep
, HS_CTL_MAX_PACKET_SIZE
);
1463 fusb300
->ep
[0]->epnum
= 0;
1464 fusb300
->gadget
.ep0
= &fusb300
->ep
[0]->ep
;
1465 INIT_LIST_HEAD(&fusb300
->gadget
.ep0
->ep_list
);
1467 fusb300
->ep0_req
= fusb300_alloc_request(&fusb300
->ep
[0]->ep
,
1469 if (fusb300
->ep0_req
== NULL
) {
1474 init_controller(fusb300
);
1475 ret
= usb_add_gadget_udc(&pdev
->dev
, &fusb300
->gadget
);
1479 dev_info(&pdev
->dev
, "version %s\n", DRIVER_VERSION
);
1484 fusb300_free_request(&fusb300
->ep
[0]->ep
, fusb300
->ep0_req
);
1487 free_irq(ires
->start
, fusb300
);
1491 if (fusb300
->ep0_req
)
1492 fusb300_free_request(&fusb300
->ep
[0]->ep
,
1502 static struct platform_driver fusb300_driver
= {
1503 .remove
= fusb300_remove
,
1505 .name
= (char *) udc_name
,
1509 module_platform_driver_probe(fusb300_driver
, fusb300_probe
);