perf python: Do not force closing original perf descriptor in evlist.get_pollfd()
[linux/fpc-iii.git] / drivers / usb / phy / phy-mv-usb.h
blob96701a1229ada8c22d97cc18ab611885794b1f9a
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
4 */
6 #ifndef __MV_USB_OTG_CONTROLLER__
7 #define __MV_USB_OTG_CONTROLLER__
9 #include <linux/types.h>
11 /* Command Register Bit Masks */
12 #define USBCMD_RUN_STOP (0x00000001)
13 #define USBCMD_CTRL_RESET (0x00000002)
15 /* otgsc Register Bit Masks */
16 #define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001
17 #define OTGSC_CTRL_VUSB_CHARGE 0x00000002
18 #define OTGSC_CTRL_OTG_TERM 0x00000008
19 #define OTGSC_CTRL_DATA_PULSING 0x00000010
20 #define OTGSC_STS_USB_ID 0x00000100
21 #define OTGSC_STS_A_VBUS_VALID 0x00000200
22 #define OTGSC_STS_A_SESSION_VALID 0x00000400
23 #define OTGSC_STS_B_SESSION_VALID 0x00000800
24 #define OTGSC_STS_B_SESSION_END 0x00001000
25 #define OTGSC_STS_1MS_TOGGLE 0x00002000
26 #define OTGSC_STS_DATA_PULSING 0x00004000
27 #define OTGSC_INTSTS_USB_ID 0x00010000
28 #define OTGSC_INTSTS_A_VBUS_VALID 0x00020000
29 #define OTGSC_INTSTS_A_SESSION_VALID 0x00040000
30 #define OTGSC_INTSTS_B_SESSION_VALID 0x00080000
31 #define OTGSC_INTSTS_B_SESSION_END 0x00100000
32 #define OTGSC_INTSTS_1MS 0x00200000
33 #define OTGSC_INTSTS_DATA_PULSING 0x00400000
34 #define OTGSC_INTR_USB_ID 0x01000000
35 #define OTGSC_INTR_A_VBUS_VALID 0x02000000
36 #define OTGSC_INTR_A_SESSION_VALID 0x04000000
37 #define OTGSC_INTR_B_SESSION_VALID 0x08000000
38 #define OTGSC_INTR_B_SESSION_END 0x10000000
39 #define OTGSC_INTR_1MS_TIMER 0x20000000
40 #define OTGSC_INTR_DATA_PULSING 0x40000000
42 #define CAPLENGTH_MASK (0xff)
44 /* Timer's interval, unit 10ms */
45 #define T_A_WAIT_VRISE 100
46 #define T_A_WAIT_BCON 2000
47 #define T_A_AIDL_BDIS 100
48 #define T_A_BIDL_ADIS 20
49 #define T_B_ASE0_BRST 400
50 #define T_B_SE0_SRP 300
51 #define T_B_SRP_FAIL 2000
52 #define T_B_DATA_PLS 10
53 #define T_B_SRP_INIT 100
54 #define T_A_SRP_RSPNS 10
55 #define T_A_DRV_RSM 5
57 enum otg_function {
58 OTG_B_DEVICE = 0,
59 OTG_A_DEVICE
62 enum mv_otg_timer {
63 A_WAIT_BCON_TIMER = 0,
64 OTG_TIMER_NUM
67 /* PXA OTG state machine */
68 struct mv_otg_ctrl {
69 /* internal variables */
70 u8 a_set_b_hnp_en; /* A-Device set b_hnp_en */
71 u8 b_srp_done;
72 u8 b_hnp_en;
74 /* OTG inputs */
75 u8 a_bus_drop;
76 u8 a_bus_req;
77 u8 a_clr_err;
78 u8 a_bus_resume;
79 u8 a_bus_suspend;
80 u8 a_conn;
81 u8 a_sess_vld;
82 u8 a_srp_det;
83 u8 a_vbus_vld;
84 u8 b_bus_req; /* B-Device Require Bus */
85 u8 b_bus_resume;
86 u8 b_bus_suspend;
87 u8 b_conn;
88 u8 b_se0_srp;
89 u8 b_sess_end;
90 u8 b_sess_vld;
91 u8 id;
92 u8 a_suspend_req;
94 /*Timer event */
95 u8 a_aidl_bdis_timeout;
96 u8 b_ase0_brst_timeout;
97 u8 a_bidl_adis_timeout;
98 u8 a_wait_bcon_timeout;
100 struct timer_list timer[OTG_TIMER_NUM];
103 #define VUSBHS_MAX_PORTS 8
105 struct mv_otg_regs {
106 u32 usbcmd; /* Command register */
107 u32 usbsts; /* Status register */
108 u32 usbintr; /* Interrupt enable */
109 u32 frindex; /* Frame index */
110 u32 reserved1[1];
111 u32 deviceaddr; /* Device Address */
112 u32 eplistaddr; /* Endpoint List Address */
113 u32 ttctrl; /* HOST TT status and control */
114 u32 burstsize; /* Programmable Burst Size */
115 u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */
116 u32 reserved[4];
117 u32 epnak; /* Endpoint NAK */
118 u32 epnaken; /* Endpoint NAK Enable */
119 u32 configflag; /* Configured Flag register */
120 u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */
121 u32 otgsc;
122 u32 usbmode; /* USB Host/Device mode */
123 u32 epsetupstat; /* Endpoint Setup Status */
124 u32 epprime; /* Endpoint Initialize */
125 u32 epflush; /* Endpoint De-initialize */
126 u32 epstatus; /* Endpoint Status */
127 u32 epcomplete; /* Endpoint Interrupt On Complete */
128 u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */
129 u32 mcr; /* Mux Control */
130 u32 isr; /* Interrupt Status */
131 u32 ier; /* Interrupt Enable */
134 struct mv_otg {
135 struct usb_phy phy;
136 struct mv_otg_ctrl otg_ctrl;
138 /* base address */
139 void __iomem *phy_regs;
140 void __iomem *cap_regs;
141 struct mv_otg_regs __iomem *op_regs;
143 struct platform_device *pdev;
144 int irq;
145 u32 irq_status;
146 u32 irq_en;
148 struct delayed_work work;
149 struct workqueue_struct *qwork;
151 spinlock_t wq_lock;
153 struct mv_usb_platform_data *pdata;
155 unsigned int active;
156 unsigned int clock_gating;
157 struct clk *clk;
160 #endif